HYDRAULIC SYSTEM
CYLINDER GPTANK GP
DRIVE GP
LINES GP-BUCKET
HYDRAULIC SYSTEM
CYLINDER GP#SEBP45910160
268-8224: CYLINDER GP-HYDRAULIC
268-8224 CYLINDER GP-HYDRAULIC
63.5-MM (2.5-IN) BORE X 431.8-MM (17-IN) STROKE
PART OF 309-1917, 309-1938 THUMB GP
AN ATTACHMENT
63.5-MM (2.5-IN) BORE X 431.8-MM (17-IN) STROKE
PART OF 309-1917, 309-1938 THUMB GP
AN ATTACHMENT
Parts for your 303.5D MINI HYD EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 3B-8489 | [2] | FITTING-GREASE (1/8-27 PTF) | |
2. | 5D-1986 | [1] | LOCKNUT (7/8-14-THD) | |
3. | 233-8447 | [2] | BUSHING | |
4. | 244-3712 | [2] | PLUG AS | |
(EACH INCLUDES) | ||||
9S-4191 | [1] | PLUG (9/16-18-THD) | ||
214-7568 | [1] | SEAL-O-RING | ||
5. | 278-2246 | [1] | PISTON | |
6. | 278-2248 | [1] | BUSHING | |
7. | 278-2254 | [1] | ROD AS-PISTON | |
8. | 278-2256 | [1] | GLAND | |
AVAILABLE REPAIR KIT(S): | ||||
278-2257 | [1] | KIT-PACKING (HYDRAULIC CYLINDER) |
#SEBP45910161
361-1125: CYLINDER GP-HYDRAULIC
361-1125 CYLINDER GP-HYDRAULIC
PART OF 361-1123 LOCK GP-QUICK COUPLER
AN ATTACHMENT
PART OF 361-1123 LOCK GP-QUICK COUPLER
AN ATTACHMENT
Parts for your 303.5D MINI HYD EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 361-1078 | [1] | KIT-SEAL | |
(INCLUDES O-RINGS & SEALS) | ||||
2. | 361-1127 | [1] | ROD AS | |
3. | 361-1128 | [1] | SEAL | |
4. | 361-1129 | [1] | PISTON | |
5. | 361-1156 | [1] | PISTON | |
6. | 361-1132 Y | [1] | VALVE GP-CHECK (HYDRAULIC CONTROL LOCK) | |
7. | 3J-1907 | [1] | SEAL-O-RING | |
8. | 9S-8004 | [1] | PLUG (9/16-18-THD) | |
Y | SEPARATE ILLUSTRATION |
#SEBP45910162
284-0863: CYLINDER GP-STICK
284-0863 CYLINDER GP-STICK
PART OF 266-9542 STICK AR
PART OF 266-9542 STICK AR
Parts for your 303.5D MINI HYD EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 265-8717 | [2] | BUSHING | |
2. | 3B-8488 | [2] | FITTING-GREASE (1/8-27 PTF) | |
3. | 278-9122 | [1] | ROD AS | |
4. | 294-7869 | [1] | HEAD | |
5. | 237-8377 | [1] | BUSHING | |
6. | 146-3916 | [1] | RING | |
7. | 146-1086 | [1] | RING | |
8. | 095-1709 | [1] | SEAL-O-RING | |
9. | 237-6124 | [1] | RING | |
10. | 095-1710 | [1] | SEAL-O-RING | |
11. | 237-6135 | [1] | PISTON | |
12. | 146-3923 | [1] | SEAL AS | |
13. | 237-6136 | [2] | RING | |
14. | 216-7643 M | [1] | SETSCREW (M8X1.25X8-MM) | |
15. | 146-3969 | [1] | BALL | |
16. | 278-9127 | [1] | BEARING | |
17. | 278-9128 | [1] | SEAL | |
18. | 278-9129 | [2] | STOP | |
19. | 278-9130 | [1] | RING | |
20. | 192-0638 | [4] | SEAL | |
AVAILABLE REPAIR KIT(S): | ||||
279-7940 | [1] | KIT-SEAL (STICK CYLINDER) | ||
M | METRIC PART |
#SEBP45910163
285-5034: CYLINDER GP-SWING BOOM
285-5034 CYLINDER GP-SWING BOOM
PART OF 345-1433 BOOM AR
PART OF 345-1433 BOOM AR
Parts for your 303.5D MINI HYD EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 265-8717 | [2] | BUSHING | |
2. | 285-5035 | [1] | CYLINDER AS-SWING BOOM | |
3. | 278-1983 | [1] | ROD AS | |
4. | 278-1984 | [1] | HEAD | |
5. | 237-6121 | [1] | BUSHING | |
6. | 146-3957 | [1] | RING | |
7. | 146-3958 | [1] | RING | |
8. | 095-1710 | [1] | SEAL-O-RING | |
9. | 237-8378 | [1] | RING | |
10. | 095-1711 | [1] | SEAL-O-RING | |
11. | 278-1985 | [1] | PISTON | |
12. | 146-3968 | [1] | SEAL AS | |
13. | 278-1986 | [2] | RING | |
14. | 216-7643 M | [1] | SETSCREW (M8X1.25X8-MM) | |
15. | 146-3969 | [1] | BALL | |
16. | 192-0638 | [4] | SEAL | |
17. | 3B-8489 | [1] | FITTING-GREASE (1/8-27 PTF) | |
278-1987 F | [1] | HEAD AS | ||
146-3957 | [1] | RING | ||
146-3958 | [1] | RING | ||
219-9057 | [1] | SEAL | ||
237-8378 | [1] | RING | ||
278-1990 | [1] | SEAL | ||
309-5902 | [1] | HEAD | ||
311-1031 | [1] | BUSHING | ||
278-1988 F | [1] | PISTON AS | ||
146-3968 | [1] | SEAL AS | ||
146-3969 | [1] | BALL | ||
216-7643 M | [1] | SETSCREW (M8X1.25X8-MM) | ||
278-1985 | [1] | PISTON | ||
278-1986 | [1] | RING | ||
AVAILABLE REPAIR KIT(S): | ||||
279-0639 | [1] | KIT-SEAL (SWING BOOM CYLINDER) | ||
F | NOT SHOWN | |||
M | METRIC PART |
#SEBP45910164
246-0192: CYLINDER GP-TILT
246-0192 CYLINDER GP-TILT
76.2-MM (3-IN) BORE X 120-MM (4.7-IN) STROKE
PART OF 279-4325 BUCKET AR-TILTABLE
AN ATTACHMENT
76.2-MM (3-IN) BORE X 120-MM (4.7-IN) STROKE
PART OF 279-4325 BUCKET AR-TILTABLE
AN ATTACHMENT
Parts for your 303.5D MINI HYD EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 1H-7339 | [1] | SEAL-O-RING | |
2. | 6E-0122 | [1] | HEAD | |
3. | 6J-1972 J | [1] | SEAL AS | |
4. | 6J-5733 J | [1] | RING-WEAR | |
5. | 9T-2212 | [1] | PISTON | |
6. | 167-2186 J | [1] | SEAL AS-BUFFER | |
7. | 167-2294 J | [1] | SEAL-U-CUP | |
8. | 226-8202 J | [1] | SEAL-WIPER | |
9. | 249-4175 | [1] | ROD AS | |
9A. | 9T-4007 | [2] | BEARING | |
10. | Z | [1] | CYLINDER AS | |
11. | 4T-6780 J | [1] | RING-WEAR | |
12. | 5P-8250 | [1] | WASHER (28X49X5-MM THK) | |
13. | 6F-7037 | [1] | BOLT (1-14X3.25-IN) | |
14. | 8J-2574 J | [1] | RING-BACKUP | |
AVAILABLE REPAIR KIT(S): | ||||
235-0354 J | KIT-SEAL (HYDRAULIC CYLINDER) | |||
'(ALSO INCLUDES BACKUP RING & O-RING SEAL) | ||||
J | (KIT MARKED J SERVICES PART(S) MARKED J | |||
Z | NOT SERVICED SEPARATELY |
#SEBP45910165
344-8836: DRAIN GP-OIL
344-8836 DRAIN GP-OIL -HYDRAULIC TANK, STANDARD
PART OF 367-7043, 367-7044 DISTRIBUTION AR
CANNOT BE USED WITH @@@@@344-8838@@@@@
AN ATTACHMENT
PART OF 367-7043, 367-7044 DISTRIBUTION AR
CANNOT BE USED WITH @@@@@344-8838@@@@@
AN ATTACHMENT
Parts for your 303.5D MINI HYD EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
344-8837 Y | [1] | DRAIN GP-OIL | ||
Y | SEPARATE ILLUSTRATION |
#SEBP45910166
344-8837: DRAIN GP-OIL
344-8837 DRAIN GP-OIL -HYDRAULIC TANK, STANDARD
PART OF 344-8836 DRAIN GP-OIL
AN ATTACHMENT
PART OF 344-8836 DRAIN GP-OIL
AN ATTACHMENT
Parts for your 303.5D MINI HYD EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 345-0712 | [1] | HOSE AS | |
2. | 355-4737 | [1] | PLATE | |
3. | 148-8315 | [1] | CONNECTOR AS | |
2M-9780 | [1] | SEAL-O-RING | ||
6V-8642 | [1] | CONNECTOR | ||
7J-9108 | [1] | SEAL-O-RING | ||
4. | 165-4935 | [1] | PLUG AS | |
6V-9510 | [1] | PLUG | ||
7J-9108 | [1] | SEAL-O-RING | ||
5. | 4H-2558 | [1] | GROMMET | |
6. | 8T-4190 M | [1] | BOLT (M16X2X25-MM) | |
7. | 9X-8257 | [1] | WASHER (17.5X30X3.5-MM THK) | |
M | METRIC PART |
#SEBP45910167
344-8839: DRAIN GP-OIL
344-8839 DRAIN GP-OIL -ECOLOGY, HYDRAULIC TANK
PART OF 344-8838 DRAIN GP-ECOLOGY
AN ATTACHMENT
PART OF 344-8838 DRAIN GP-ECOLOGY
AN ATTACHMENT
Parts for your 303.5D MINI HYD EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 274-6533 | [1] | ADAPTER AS | |
7J-9108 | [1] | SEAL-O-RING | ||
274-6532 | [1] | ADAPTER | ||
2. | 345-0712 | [1] | HOSE AS | |
3. | 355-4737 | [1] | PLATE | |
4. | 148-8315 | [1] | CONNECTOR AS | |
2M-9780 | [1] | SEAL-O-RING | ||
6V-8642 | [1] | CONNECTOR | ||
7J-9108 | [1] | SEAL-O-RING | ||
5. | 296-3111 | [1] | PLUG-DRAIN (HYDRAULIC TANK OIL) | |
6. | 296-3112 | [1] | TUBE AS-DRAIN | |
7. | 2M-9780 | [1] | SEAL-O-RING | |
8. | 4H-2558 | [1] | GROMMET | |
9. | 8T-4190 M | [1] | BOLT (M16X2X25-MM) | |
10. | 9X-8257 | [1] | WASHER (17.5X30X3.5-MM THK) | |
M | METRIC PART |
#SEBP45910168
266-6396: DRIVE GP-SWING
266-6396 DRIVE GP-SWING
PART OF 265-8752 MOTOR & MTG GP-SWING
PART OF 265-8752 MOTOR & MTG GP-SWING
Parts for your 303.5D MINI HYD EXCAVATOR:
CATERPILLAR SIS#SEBP45910169
269-4197: FASTENER GP-LINES
269-4197 FASTENER GP-LINES -STICK
PART OF 266-9542 STICK AR
PART OF 266-9542 STICK AR
Parts for your 303.5D MINI HYD EXCAVATOR:
CATERPILLAR SISInformation:
HYDRAULIC SYSTEM
CYLINDER GP
Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Specifications
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Systems Operation
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Contamination Control Guidelines
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Testing and Adjusting
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the
Disassembly and Assembly
Blade Cylinder - Remove and Install
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems
Bucket Cylinder - Remove and Install
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems
Stick Cylinder - Remove and Install
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems
Boom Cylinder - Remove and Install
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems
Swing Boom Cylinder - Remove and Install
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems
303.5D CR, 304D CR, 305D CR and 305.5D CR Mini Hydraulic Excavators Machine Systems
Service Magazine