BASIC ENGINE
VALVE MECHANISM GPCRANKSHAFT GP
BASIC ENGINE
VALVE MECHANISM GP
#SEBP46020020
246-2582: COVER GP-VALVE MECHANISM
246-2582 COVER GP-VALVE MECHANISM
S/N G4D1-UP; CRS1-UP
PART OF 323-5725, 325-5121 ENGINE AR-PRIMARY
Type 5
AN ATTACHMENT
S/N G4D1-UP; CRS1-UP
PART OF 323-5725, 325-5121 ENGINE AR-PRIMARY
Type 5
AN ATTACHMENT
For full view, you need register
Parts for your 414E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6I-0260 M | [2] | BOLT (M8X1.25X25-MM) | |
| 2. | 217-9039 | [1] | STRAP-CABLE | |
| 3. | 6I-0917 M | [1] | BOLT (M6X1X25-MM) | |
| 4. | 7C-1281 | [1] | BRACKET | |
| 5. | 100-4841 M | [2] | BOLT (M6X1X10-MM) | |
| 6. | 5D-1026 | [1] | CLAMP-BAND | |
| 7. | 162-1565 | [1] | SPRING (CRANKCASE BREATHER HOSE) | |
| 8. | 198-8645 | [1] | HOSE (CRANKCASE BREATHER) | |
| 9. | 225-6522 | [1] | PLUG-CUP | |
| 10. | 100-4838 M | [2] | BOLT (M6X1X20-MM) | |
| 11. | 287-8573 | [1] | PIPE AS (BREATHER) | |
| 11A. | 150-7732 | [1] | SEAL-O-RING | |
| 11B. | 286-3030 | [1] | RING-SEAL | |
| 12. | 237-0769 | [1] | SHIELD-HEAT | |
| 13. | 317-3769 | [1] | FILLER GP-ENGINE OIL (ENGINE) | |
| 13A. | 317-3778 | [1] | SEAL-O-RING | |
| 14. | 446-9143 CY | [1] | COVER GP-CYLINDER HEAD | |
| 15. | 346-8219 | [1] | FILM-WARNING (UNIVERSAL WARNING) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP46020021
246-2583: COVER GP-VALVE MECHANISM
246-2583 COVER GP-VALVE MECHANISM
S/N G4D1-UP; CRS1-UP
PART OF 245-6841 ENGINE AR-PRIMARY
Type 1
AN ATTACHMENT
S/N G4D1-UP; CRS1-UP
PART OF 245-6841 ENGINE AR-PRIMARY
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your 414E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6I-0260 M | [2] | BOLT (M8X1.25X25-MM) | |
| 2. | 6I-0846 M | [3] | BOLT (M6X1X14-MM) | |
| 3. | 6I-0917 M | [1] | BOLT (M6X1X25-MM) | |
| 4. | 100-4841 M | [2] | BOLT (M6X1X10-MM) | |
| 5. | 225-6522 | [1] | PLUG-CUP | |
| 6. | 286-3029 C | [1] | BREATHER AS (CONNECTOR) | |
| 6A. | 150-7732 | [1] | SEAL-O-RING (19.5MM ID) | |
| 6B. | 286-3030 | [1] | RING-SEAL (ISOLATOR) | |
| 7. | 230-9127 | [1] | COVER (INJECTOR) | |
| 8. | 247-7798 C | [1] | COVER AS (VALVE) | |
| 8A. | 225-6451 | [1] | GASKET (VALVE COVER) | |
| 8B. | 225-6455 | [10] | BOLT | |
| 8C. | 225-6456 | [1] | SPRING | |
| 8D. | 225-6461 | [1] | CAP | |
| 8E. | 225-6464 | [1] | DIAPHRAGM (CRANKCASE PRESSURE CONTACTOR) | |
| 8F. | 225-6477 | [1] | PLATE | |
| 8G. | 225-6478 | [4] | SCREW-MACHINE | |
| 8H. | 225-6479 | [1] | CAP | |
| 9. | 237-0769 | [1] | SHIELD-HEAT | |
| 10. | 246-1163 | [1] | FILLER AS-OIL | |
| 10A. | 229-4896 | [1] | SEAL-O-RING (021.8MM ID) | |
| 11. | 100-4838 CM | [2] | BOLT (M6X1X20-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP46020022
246-2583: COVER GP-VALVE MECHANISM
246-2583 COVER GP-VALVE MECHANISM
S/N G4D1-UP; CRS1-UP
PART OF 245-6841 ENGINE AR-PRIMARY
Type 2
AN ATTACHMENT
S/N G4D1-UP; CRS1-UP
PART OF 245-6841 ENGINE AR-PRIMARY
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your 414E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6I-0260 M | [2] | BOLT (M8X1.25X25-MM) | |
| 2. | 6I-0846 M | [3] | BOLT (M6X1X14-MM) | |
| 3. | 6I-0917 M | [1] | BOLT (M6X1X25-MM) | |
| 4. | 100-4841 M | [2] | BOLT (M6X1X10-MM) | |
| 5. | 225-6522 | [1] | PLUG-CUP | |
| 6. | 286-3029 | [1] | BREATHER AS (CONNECTOR) | |
| 6A. | 150-7732 | [1] | SEAL-O-RING (19.5MM ID) | |
| 6B. | 286-3030 | [1] | RING-SEAL (ISOLATOR) | |
| 7. | 230-9127 | [1] | COVER (INJECTOR) | |
| 8. | 308-1792 C | [1] | COVER GP-VALVE MECHANISM | |
| 8A. | 225-6451 | [1] | GASKET (VALVE COVER) | |
| 8B. | 225-6456 | [1] | SPRING (BREATHER VALVE) | |
| 8C. | 225-6461 | [1] | CAP (VALVE COVER) | |
| 8D. | 225-6464 | [1] | DIAPHRAGM (CRANKCASE PRESSURE CONTACTOR) | |
| 8E. | 225-6477 | [1] | PLATE | |
| 8F. | 225-6478 | [4] | SCREW-MACHINE | |
| 8G. | 225-6479 | [1] | CAP (BREATHER VALVE) | |
| 9. | 237-0769 | [1] | SHIELD-HEAT | |
| 10. | 317-3769 | [1] | FILLER GP-ENGINE OIL | |
| 11. | 100-4838 M | [2] | BOLT (M6X1X20-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP46020023
246-2583: COVER GP-VALVE MECHANISM
246-2583 COVER GP-VALVE MECHANISM
S/N G4D1-UP; CRS1-UP
PART OF 245-6841 ENGINE AR-PRIMARY
Type 3
AN ATTACHMENT
S/N G4D1-UP; CRS1-UP
PART OF 245-6841 ENGINE AR-PRIMARY
Type 3
AN ATTACHMENT
For full view, you need register
Parts for your 414E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6I-0260 M | [2] | BOLT (M8X1.25X25-MM) | |
| 2. | 346-8219 C | [1] | FILM-WARNING (UNIVERSAL WARNING) | |
| 3. | 6I-0917 M | [1] | BOLT (M6X1X25-MM) | |
| 4. | 100-4841 M | [2] | BOLT (M6X1X10-MM) | |
| 5. | 225-6522 | [1] | PLUG-CUP | |
| 6. | 286-3029 | [1] | BREATHER AS (CONNECTOR) | |
| 6A. | 150-7732 | [1] | SEAL-O-RING | |
| 6B. | 286-3030 | [1] | RING-SEAL (ISOLATOR) | |
| 7. | 100-4838 M | [2] | BOLT (M6X1X20-MM) | |
| 8. | 308-1792 Y | [1] | COVER GP-VALVE MECHANISM | |
| 9. | 237-0769 | [1] | SHIELD-HEAT | |
| 10. | 317-3769 | [1] | FILLER GP-ENGINE OIL | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP46020024
308-1792: COVER GP-VALVE MECHANISM
308-1792 COVER GP-VALVE MECHANISM
S/N G4D1-UP; CRS1-UP
PART OF 246-2583 COVER GP-VALVE MECHANISM
AN ATTACHMENT
S/N G4D1-UP; CRS1-UP
PART OF 246-2583 COVER GP-VALVE MECHANISM
AN ATTACHMENT
For full view, you need register
Parts for your 414E BACKHOE LOADER:
CATERPILLAR SIS#SEBP46020025
232-7400: CRANKSHAFT GP
232-7400 CRANKSHAFT GP
S/N G4D1-UP; CRS1-UP
WITH SPLINE
PART OF 233-7027, 313-3357 CRANKSHAFT GP
AN ATTACHMENT
S/N G4D1-UP; CRS1-UP
WITH SPLINE
PART OF 233-7027, 313-3357 CRANKSHAFT GP
AN ATTACHMENT
For full view, you need register
Parts for your 414E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1B-8736 | [1] | KEY-WOODRUFF | |
| 2. | 225-7772 | [1] | BEARING SET-MAIN (STANDARD) | |
| 233-3785 AB | KIT-CRANKSHAFT BEARING (0.50-MM US) | |||
| 233-3784 AB | KIT-CRANKSHAFT BEARING (0.25-MM US) | |||
| 233-3786 AB | KIT-CRANKSHAFT BEARING (0.75-MM US) | |||
| 3. | 032-9090 | [2] | WASHER-THRUST (STANDARD-UPPER) | |
| 067-6873 AB | WASHER-THRUST (0.18-MM OS) | |||
| 4. | 032-9091 | [2] | WASHER-THRUST (STANDARD-LOWER) | |
| 067-6874 AB | WASHER-THRUST (0.18-MM OS) | |||
| 5. | 353-2205 | [1] | KIT-ROD BEARING | |
| 353-2206 AB | KIT-ROD BEARING (0.25-MM US) | |||
| 353-2207 AB | KIT-ROD BEARING (0.50-MM US) | |||
| 353-2208 AB | KIT-ROD BEARING (0.75-MM US) | |||
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
#SEBP46020026
232-7439: CRANKSHAFT GP
232-7439 CRANKSHAFT GP
S/N G4D1-UP; CRS1-UP
PART OF 323-5725, 325-5121 ENGINE AR-PRIMARY
AN ATTACHMENT
S/N G4D1-UP; CRS1-UP
PART OF 323-5725, 325-5121 ENGINE AR-PRIMARY
AN ATTACHMENT
For full view, you need register
Parts for your 414E BACKHOE LOADER:
CATERPILLAR SIS#SEBP46020027
233-7027: CRANKSHAFT GP
233-7027 CRANKSHAFT GP
S/N G4D1-UP; CRS1-UP
PART OF 245-6841 ENGINE AR-PRIMARY
AN ATTACHMENT
S/N G4D1-UP; CRS1-UP
PART OF 245-6841 ENGINE AR-PRIMARY
AN ATTACHMENT
For full view, you need register
Parts for your 414E BACKHOE LOADER:
CATERPILLAR SIS#SEBP46020028
308-4729: CRANKSHAFT GP
308-4729 CRANKSHAFT GP
S/N G4D1-UP; CRS1-UP
PART OF 273-3610 ENGINE AR, 323-5725, 325-5121 ENGINE AR-PRIMARY
Type 1
AN ATTACHMENT
S/N G4D1-UP; CRS1-UP
PART OF 273-3610 ENGINE AR, 323-5725, 325-5121 ENGINE AR-PRIMARY
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your 414E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 216-8314 | [1] | GEAR-CRANKSHAFT (34-TEETH) | |
| 3. | 232-7400 J | [1] | CRANKSHAFT GP (WITH SPLINE)(CONNECTING ROD, 63.48-MM DIA) | |
| 4. | 225-7772 | [1] | BEARING SET-MAIN (STANDARD) | |
| 233-3784 AB | KIT-CRANKSHAFT BEARING (0.25-MM US) | |||
| 233-3785 AB | KIT-CRANKSHAFT BEARING (0.50-MM US) | |||
| 233-3786 AB | KIT-CRANKSHAFT BEARING (0.75-MM US) | |||
| 5. | 225-7781 | [1] | BEARING SET-ROD (STANDARD) | |
| 233-3788 AB | KIT-ROD BEARING (0.25-MM US) | |||
| 233-3789 AB | KIT-ROD BEARING (0.50-MM US) | |||
| AB | KIT-ROD BEARING (0.75-MM US) | |||
| 6. | 032-9090 | [2] | WASHER-THRUST (STANDARD-UPPER) | |
| 067-6873 AB | WASHER-THRUST (0.18-MM OS)(UPPER) | |||
| 7. | 032-9091 | [2] | WASHER-THRUST (STANDARD-LOWER) | |
| 067-6874 AB | WASHER-THRUST (0.18-MM OS)(LOWER) | |||
| 8. | 1B-8736 | [1] | KEY-WOODRUFF | |
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| J | CHECK CONNECTING ROD JOURNAL TO ENSURE THIS IS THE CORRECT CRANKSHAFT | |||
#SEBP46020029
308-4729: CRANKSHAFT GP
308-4729 CRANKSHAFT GP
S/N G4D1-UP; CRS1-UP
PART OF 323-5725, 325-5121 ENGINE AR-PRIMARY
Type 2
AN ATTACHMENT
S/N G4D1-UP; CRS1-UP
PART OF 323-5725, 325-5121 ENGINE AR-PRIMARY
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your 414E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 216-8314 | [1] | GEAR-CRANKSHAFT (34-TEETH) | |
| 2. | 359-0715 CJY | [1] | CRANKSHAFT GP (W/O SPLINE)(CONNECTING ROD, 68-MM DIA) | |
| 3. | 067-6135 C | [1] | KEY-WOODRUFF | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| J | CHECK CONNECTING ROD JOURNAL TO ENSURE THIS IS THE CORRECT CRANKSHAFT | |||
| Y | SEPARATE ILLUSTRATION | |||
Information:
BASIC ENGINE
VALVE MECHANISM GP
Truck Engine News
Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209}
2012/10/08
2012/10/08
Engine News
Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209}
2012/10/08
2012/10/08
Specifications
Tool Operating Manual
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
Reuse And Salvage Guidelines
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Testing and Adjusting
Disassembly and Assembly
Service Magazine
