ELECTRICAL AND STARTING SYSTEM
SENSOR GPSTARTING MOTOR GP
SWITCH GP
WIRING GP
ELECTRICAL AND STARTING SYSTEM
SENSOR GP
#SEBP46100140
318-1181: SENSOR GP-SPEED
318-1181 SENSOR GP-SPEED
S/N PRA1-UP
MAGNETIC, LOW OUTPUT
PART OF 455-4805 CASE GP-TRANSMISSION
FIELD REPLACEMENT FOR @@@@@189-5746@@@@@
AN ATTACHMENT
S/N PRA1-UP
MAGNETIC, LOW OUTPUT
PART OF 455-4805 CASE GP-TRANSMISSION
FIELD REPLACEMENT FOR @@@@@189-5746@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your 420E BACKHOE LOADER:
CATERPILLAR SIS#SEBP46100141
303-5769: STARTING MOTOR GP-ELECTRIC
303-5769 STARTING MOTOR GP-ELECTRIC -12-VOLT
S/N C4E1-UP
PART OF 288-5219, 435-1669 ENGINE AR-PRIMARY
S/N C4E1-UP
PART OF 288-5219, 435-1669 ENGINE AR-PRIMARY
For full view, you need register
Parts for your 420E BACKHOE LOADER:
CATERPILLAR SIS#SEBP46100142
290-6784: SWITCH GP-ALL WHEEL DRIVE
290-6784 SWITCH GP-ALL WHEEL DRIVE
S/N PRA1-UP
PART OF 317-1455 DRIVE AR-BACKHOE LOADER
Type 1
AN ATTACHMENT
S/N PRA1-UP
PART OF 317-1455 DRIVE AR-BACKHOE LOADER
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your 420E BACKHOE LOADER:
CATERPILLAR SIS#SEBP46100143
290-6784: SWITCH GP-ALL WHEEL DRIVE
290-6784 SWITCH GP-ALL WHEEL DRIVE
S/N PRA1-UP
PART OF 317-1455 DRIVE AR-BACKHOE LOADER
Type 2
AN ATTACHMENT
S/N PRA1-UP
PART OF 317-1455 DRIVE AR-BACKHOE LOADER
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your 420E BACKHOE LOADER:
CATERPILLAR SIS#SEBP46100144
202-6010: SWITCH GP-DIFFERENTIAL LOCK
202-6010 SWITCH GP-DIFFERENTIAL LOCK -CENTER PIVOT MACHINE
S/N PRA1-UP
PART OF 298-5937, 298-5938, 298-5939, 348-4106 POWER TRAIN AR
AN ATTACHMENT
S/N PRA1-UP
PART OF 298-5937, 298-5938, 298-5939, 348-4106 POWER TRAIN AR
AN ATTACHMENT
For full view, you need register
Parts for your 420E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 201-9459 | [1] | BOOT | |
| 2. | 204-0775 | [1] | SWITCH AS-FOOT (DIFFERENTIAL LOCK ON, OFF) | |
| 3. | 205-6298 | [1] | ACTUATOR | |
| 4. | 213-6060 | [1] | HARNESS AS-WIRING (DIFFERENTIAL LOCK) | |
| 9X-3401 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 205-9362 | [1] | PLUG AS | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 100-6674 | [2] | SEAL-CONNECTOR | ||
| 8L-8413 | [2] | STRAP-CABLE (WHITE) | ||
#SEBP46100145
7N-0718: SWITCH GP-DISCONNECT
7N-0718 SWITCH GP-DISCONNECT -BATTERY
S/N PRA1-UP
6-VOLT TO 24-VOLT
PART OF 290-6789 BATTERY & WIRING GP
S/N PRA1-UP
6-VOLT TO 24-VOLT
PART OF 290-6789 BATTERY & WIRING GP
For full view, you need register
#SEBP46100146
328-9721: SWITCH GP-PRESSURE
328-9721 SWITCH GP-PRESSURE
S/N C4E1-UP
PART OF 288-5219, 435-1669 ENGINE AR-PRIMARY
S/N C4E1-UP
PART OF 288-5219, 435-1669 ENGINE AR-PRIMARY
For full view, you need register
#SEBP46100147
290-6726: WIRING GP-AIR CONDITIONER
290-6726 WIRING GP-AIR CONDITIONER
S/N PRA1-UP
PART OF 294-4948 CAB AR-ENCLOSED ROPS
AN ATTACHMENT
S/N PRA1-UP
PART OF 294-4948 CAB AR-ENCLOSED ROPS
AN ATTACHMENT
For full view, you need register
Parts for your 420E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7K-1181 | [5] | STRAP-CABLE | |
| 2. | 8E-9571 | [1] | WASHER-HARD (8.8X16X7-MM THK) | |
| 3. | 8T-8799 | [1] | BOOT (RED) | |
| 4. | 149-6371 | [1] | SWITCH AS-PRESSURE (A/C COMPRESSOR CLUTCH)(REFRIGERANT, LOW) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 186-3735 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 5. | 214-4695 | [1] | SWITCH AS-ROCKER (BLOWER FAN SPEED) | |
| 6. | 214-4718 | [1] | SWITCH AS-ROCKER (AIR CONDITIONER, HEATER SELECT) | |
| (EACH SWITCH AS-ROCKER INCLUDES) | ||||
| 111-7899 | [1] | GASKET | ||
| 7. | 236-6923 | [1] | SWITCH AS-PRESSURE (HIGH, LOW)(REFRIGERANT COMPR, HIGH SIDE) | |
| 8. | 275-0570 | [1] | BAR-BUS | |
| 9. | 278-0461 | [1] | RELAY AS (12-VOLT)(COMPRESSOR CLUTCH) | |
| 10. | 290-6727 | [1] | HARNESS AS-HEATER & AIR COND (COMPRESSOR) | |
| 124-5640 | [2] | TERMINAL-SOCKET | ||
| 8L-8413 | [3] | STRAP-CABLE (WHITE) | ||
| 189-3158 | [1] | SUPPRESSOR-ARC | ||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8L-8413 | [3] | STRAP-CABLE (WHITE) | ||
| 100-6674 | [2] | SEAL-CONNECTOR | ||
| 186-3735 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 186-3736 | [6] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM) | |||
| 155-2270 | [3] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 189-3158 | [1] | SUPPRESSOR-ARC | ||
| 11. | 290-6728 | [1] | HARNESS AS-MOTOR | |
| 122-4401 | [1] | TERMINAL | ||
| 2L-8069 | [1] | TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW) | ||
| 2L-8067 | [1] | TERMINAL-RING (10-GA TO 12-GA, 1/4-IN SCREW) | ||
| 091-2436 | [11] | TERMINAL-BLADE (18-GA TO 22-GA) | ||
| 104-1995 | [7] | TERMINAL-BLADE (14-GA TO 18-GA) | ||
| 9X-1055 | [2] | TERMINAL-RECEPTACLE (12-GA) | ||
| 100-5041 | [2] | TERMINAL-RECEPTACLE (18-GA TO 20-GA) | ||
| 111-6792 | [3] | TERMINAL-RECEPTACLE (18-GA TO 20-GA) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3S-2093 | [3] | STRAP-CABLE | ||
| 8T-8737 | [1] | PLUG-SEAL | ||
| 9X-1054 | [1] | PLUG AS-CONNECTOR (4-PIN) | ||
| 111-6795 | [1] | HOUSING-RELAY (STARTING AID) | ||
| 111-6816 | [1] | LOCK | ||
| 186-3735 | [8] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(20-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM) | |||
| 141-8061 B | TAPE | |||
| 177-9648 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| 177-9656 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 213-0139 | [5] | PIN (4-MM) | ||
| 228-5856 | [2] | CONNECTOR (10-PIN) | ||
| 12. | 115-1615 | [1] | RELAY AS (12-VOLT)(FAN SPEED) | |
| 13. | 138-8454 M | [1] | SCREW-TRUSS HEAD (M4X0.7X10-MM) | |
| 14. | 8T-9534 M | [1] | BOLT (M6X1X50-MM) | |
| 15. | 276-7287 Y | [1] | RELAY GP (12-VOLT)(POWER DISTRIBUTION) | |
| 16. | 3S-2093 | [8] | STRAP-CABLE | |
| 17. | 4B-4863 | [1] | WASHER (4.7X11X1.2-MM THK) | |
| 18. | 4P-7581 | [1] | CLIP (LADDER) | |
| 19. | 5C-2890 M | [1] | NUT (M6X1-THD) | |
| 20. | 5C-7261 M | [1] | NUT (M8X1.25-THD) | |
| 21. | 8T-4171 M | [1] | BOLT (M6X1X12-MM) | |
| 22. | 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 23. | 8T-4224 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 24. | 8T-4908 M | [1] | BOLT (M8X1.25X25-MM) | |
| 25. | 9X-7378 | [2] | SEAL-O-RING | |
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP46100148
290-6735: WIRING GP-CONSOLE
290-6735 WIRING GP-CONSOLE -SIDE
S/N PRA1-UP
PART OF 294-4946, 294-4947, 294-4948 CAB AR-ENCLOSED ROPS, 294-4944, 294-4945 CANOPY AR-OPEN ROPS
AN ATTACHMENT
S/N PRA1-UP
PART OF 294-4946, 294-4947, 294-4948 CAB AR-ENCLOSED ROPS, 294-4944, 294-4945 CANOPY AR-OPEN ROPS
AN ATTACHMENT
For full view, you need register
Parts for your 420E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 110-7887 | [1] | SWITCH AS-START (KEY) | |
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 186-3735 | [1] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 7T-6799 | [1] | NUT-MOUNTING (1-32-THD) | ||
| 2. | 131-1424 | [1] | SEAL | |
| 3. | 170-6542 | [1] | GAUGE GP-OIL TEMPERATURE (TORQUE CONVERTER) | |
| 4B-2043 | [3] | NUT (8-32-THD) | ||
| 7X-9065 | [1] | LAMP (12-VOLT) | ||
| 9B-7233 | [3] | LOCKWASHER | ||
| 4. | 197-7499 M | [2] | BOLT (M4X0.7X25-MM) | |
| 5. | 206-1345 | [3] | STRAP-CABLE | |
| 6. | 214-4693 | [1] | SWITCH AS-ROCKER (WARNING BEACON) | |
| 111-7899 | [1] | GASKET | ||
| 7. | 226-7164 | [1] | GAUGE GP-COOLANT TEMPERATURE | |
| 4B-2043 | [6] | NUT (8-32-THD) | ||
| 7X-9065 | [1] | LAMP (12-VOLT) | ||
| 9B-7233 | [3] | LOCKWASHER | ||
| 8. | 227-1057 | [4] | PLUG | |
| 9. | 231-9356 | [1] | FILM-IDENTIFICATION (CONSOLE, RH) | |
| 10. | 239-1080 Y | [1] | TACHOMETER GP-ELECTRIC | |
| 11. | 290-6736 | [1] | HARNESS AS-CONSOLE | |
| 2L-8075 | [4] | TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW) | ||
| 186-3736 | [36] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 122-4401 | [1] | TERMINAL | ||
| 7N-7221 | [5] | TERMINAL-BLADE (18-GA TO 22-GA) | ||
| 091-2436 | [42] | TERMINAL-BLADE (18-GA TO 22-GA) | ||
| 104-1995 | [13] | TERMINAL-BLADE (14-GA TO 18-GA) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3S-2093 | [9] | STRAP-CABLE | ||
| 8T-8737 | [7] | PLUG-SEAL | ||
| 186-3735 | [1] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(20-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(20-CM) | |||
| 141-8061 B | TAPE | |||
| 155-2255 | [2] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 167-3693 | [1] | PLUG AS-CONNECTOR (31-PIN) | ||
| 9X-3401 | [1] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [1] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 180-9340 | [26] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 228-5856 | [7] | CONNECTOR (10-PIN) | ||
| 12. | 290-6761 | [1] | SWITCH AS-ROCKER (SPEED CONTROL) | |
| 111-7899 | [1] | GASKET | ||
| 13. | 297-5346 | [1] | INDICATOR AS (SPEED CONTROL) | |
| 111-7899 | [1] | GASKET | ||
| 14. | 297-5532 | [1] | INDICATOR AS (MACHINE SECURITY) | |
| 111-7899 | [1] | GASKET | ||
| 15. | 300-4994 | [1] | SWITCH AS-ROCKER (HYDRAULIC LOCKOUT) | |
| 111-7899 | [1] | GASKET | ||
| 16. | 311-6609 | [1] | MODULE GP-WARNING INDICATOR (WITH ALARM, FUNCTION LIGHTS) | |
| 8T-8737 | [2] | PLUG-SEAL | ||
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| 186-3735 | [10] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 232-4706 | [1] | GASKET | ||
| 17. | 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | |
| (INCLUDES PLUG AS & WEDGE) | ||||
| 18. | 170-6305 | [1] | GAUGE GP-FUEL LEVEL (FUEL LEVEL) | |
| 4B-2043 | [3] | NUT (8-32-THD) | ||
| 9B-7233 | [3] | LOCKWASHER | ||
| 7X-9065 | [1] | LAMP (12-VOLT) | ||
| 19. | 3S-2093 | [6] | STRAP-CABLE | |
| 20. | 6V-3507 | [3] | SEAL-RECTANGULAR | |
| 21. | 8T-2659 M | [2] | LOCKNUT (M4X0.7-THD) | |
| 22. | 8T-8737 | [2] | PLUG-SEAL | |
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP46100149
290-6750: WIRING GP-ENGINE
For full view, you need register
Parts for your 420E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7K-1181 | [18] | STRAP-CABLE | |
| 2. | 7Y-3883 | [1] | CABLE AS | |
| 1S-7251 | [2] | TERMINAL-CABLE (00-GA, 1/2-IN SCREW) | ||
| 5P-0747 E | CABLE (00-GA, BLACK)(40-CM) | |||
| 3. | 128-4249 | [1] | LOCKWASHER | |
| 4. | 130-1433 | [1] | SPACER (11X25X17-MM THK) | |
| 5. | 146-1815 | [1] | STRAP AS | |
| 6. | 164-9425 | [1] | HORN AS (12-VOLT, LOW TONE) | |
| 7. | 180-9900 | [1] | CAP AS | |
| 5P-7958 | [1] | SLEEVE-CABLE SPLICE (LITERATURE LANYARD) | ||
| 8C-6354 | [1] | CAP-RECEPTACLE (ET CONNECTOR) | ||
| 179-9392 | [1] | LANYARD | ||
| 8. | 200-6345 | [2] | SADDLE-MOUNTING (DUAL SWIVEL) | |
| 9. | 211-0052 | [1] | NUT (1-11/16-18-THD) | |
| 10. | 243-5027 M | [1] | NUT (M6X1-THD) | |
| 11. | 244-3106 | [1] | SENDER AS-TEMPERATURE (12V)(ENGINE COOLANT) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 186-3735 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 12. | 290-6751 | [1] | HARNESS AS-ENGINE | |
| 123-7615 | [2] | CONNECTOR (1-PIN) | ||
| 7T-0093 | [1] | PIN-CONNECTOR (12-GA TO 14-GA) | ||
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2260 | [3] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2270 | [7] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| (EACH PLUG KIT INCULDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 8T-8737 | [16] | PLUG-SEAL | ||
| 134-2540 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| 100-6674 | [2] | SEAL-CONNECTOR | ||
| 186-3736 | [39] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9W-0844 | [3] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 124-5640 | [2] | TERMINAL-SOCKET | ||
| 3S-2093 | [3] | STRAP-CABLE | ||
| 141-8061 B | TAPE | |||
| 5P-1478 | [1] | TERMINAL-FORK (10-GA TO 12-GA, NO. 10 SCREW) | ||
| 2L-8067 | [1] | TERMINAL-RING (10-GA TO 12-GA, 1/4-IN SCREW) | ||
| 2L-8069 | [1] | TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW) | ||
| 2L-8079 | [2] | TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW) | ||
| 7N-9017 | [3] | TERMINAL-RING (18-GA TO 22-GA, NO. 10 SCREW) | ||
| 091-2436 | [4] | TERMINAL-BLADE (18-GA TO 22-GA) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(50-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM) | |||
| 13. | 292-4251 | [4] | SCREW-TRUSS HEAD (M8X1.25X60-MM) | |
| 14. | 297-5257 | [1] | BRACKET AS | |
| 15. | 298-0663 | [4] | CLIP (LADDER) | |
| 16. | 321-1380 | [1] | BRACKET | |
| 17. | 111-4627 M | [1] | SCREW-MACHINE (M6X1X30-MM) | |
| 18. | 132-5789 | [5] | CLIP (LADDER) | |
| 19. | 277-1873 | [1] | CLIP (LADDER) | |
| 20. | 2W-9372 | [6] | LOCKWASHER | |
| 21. | 3J-4818 | [3] | LOCKWASHER | |
| 22. | 3S-2093 | [32] | STRAP-CABLE | |
| 23. | 4P-7428 | [1] | CLIP (LADDER) | |
| 24. | 4P-7429 | [1] | CLIP (LADDER) | |
| 25. | 4P-7581 | [3] | CLIP (LADDER) | |
| 26. | 4P-8134 | [1] | CLIP (LADDER) | |
| 27. | 5C-2874 M | [2] | NUT (M5X0.8-THD) | |
| 28. | 5C-2890 M | [1] | NUT (M6X1-THD) | |
| 29. | 5C-7261 M | [4] | NUT (M8X1.25-THD) | |
| 30. | 5P-4116 | [1] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 31. | 5P-6459 | [1] | GROMMET | |
| 32. | 5T-6374 | [1] | SPACER (11X20X40-MM THK) | |
| 33. | 6V-7359 | [1] | GROMMET (25-MM ID, 37-MM OD) | |
| 34. | 8D-9671 | [1] | CLIP | |
| 35. | 8F-1434 | [2] | LOCKWASHER | |
| 36. | 8T-0328 | [2] | WASHER-HARD (5.5X10X1-MM THK) | |
| 37. | 8T-4121 | [8] | WASHER-HARD (11X21X2.5-MM THK) | |
| 38. | 8T-4137 M | [5] | BOLT (M10X1.5X20-MM) | |
| 39. | 8T-4189 M | [1] | BOLT (M8X1.25X20-MM) | |
| 40. | 8T-4192 M | [4] | BOLT (M12X1.75X25-MM) | |
| 41. | 8T-4195 M | [1] | BOLT (M10X1.5X30-MM) | |
| 42. | 8T-4223 | [5] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 43. | 8T-4224 | [3] | WASHER-HARD (8.8X16X2-MM THK) | |
| 44. | 8T-4908 M | [1] | BOLT (M8X1.25X25-MM) | |
| 45. | 8T-5093 M | [1] | BOLT-LOCKING (M8X1.25X25-MM) | |
| 46. | 8T-6869 M | [1] | BOLT (M8X1.25X60-MM) | |
| 47. | 9N-0869 | [5] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
Information:
ELECTRICAL AND STARTING SYSTEM
SENSOR GP
Tool Operating Manual
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Disassembly and Assembly
Position Sensor (Fuel Injection Pump) - Remove and Install
C4.4 Engines for Caterpillar Built Machines
C4.4 Engines for Caterpillar Built Machines
