ELECTRICAL AND STARTING SYSTEM
WIRING GPELECTRICAL AND STARTING SYSTEM
WIRING GP
#SEBP46100150
290-6750: WIRING GP-ENGINE
For full view, you need register
Parts for your 420E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7K-1181 | [18] | STRAP-CABLE | |
| 2. | 7Y-3883 | [1] | CABLE AS | |
| 1S-7251 | [2] | TERMINAL-CABLE (00-GA, 1/2-IN SCREW) | ||
| 159-8050 E | CABLE (00-GA, BLACK)(40-CM) | |||
| 3. | 128-4249 | [1] | LOCKWASHER | |
| 4. | 130-1433 | [1] | SPACER (11X25X17-MM THK) | |
| 5. | 146-1815 | [1] | STRAP AS | |
| 6. | 164-9425 | [1] | HORN AS (12-VOLT, LOW TONE) | |
| 7. | 180-9900 | [1] | CAP AS | |
| 5P-7958 | [1] | SLEEVE-CABLE SPLICE (LITERATURE LANYARD) | ||
| 8C-6354 | [1] | CAP-RECEPTACLE (ET CONNECTOR) | ||
| 179-9392 | [1] | LANYARD | ||
| 8. | 200-6345 | [2] | SADDLE-MOUNTING (DUAL SWIVEL) | |
| 9. | 211-0052 | [1] | NUT (1-11/16-18-THD) | |
| 10. | 243-5027 M | [1] | NUT (M6X1-THD) | |
| 11. | 244-3106 | [1] | SENDER AS-TEMPERATURE (12V)(ENGINE COOLANT) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 12. | 290-6751 | [1] | HARNESS AS-ENGINE | |
| 274-3774 | [3] | CAP-CONNECTOR | ||
| 274-3775 | [1] | CAP-CONNECTOR | ||
| 123-7615 | [2] | CONNECTOR (1-PIN) | ||
| 245-1045 | [2] | COVER | ||
| 245-1044 | [4] | LOCK-CONNECTOR | ||
| 203-9007 | [1] | NUT (1-1/2-18-THD) | ||
| 213-0139 | [2] | PIN (4-MM) | ||
| 7T-0093 | [1] | PIN-CONNECTOR (12-GA TO 14-GA) | ||
| 9X-3401 | [6] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 262-9151 | [1] | PIN-CONNECTOR (12-GA TO 14-GA) | ||
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2260 | [3] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2270 | [7] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| 177-9648 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 167-3692 | [2] | RECEPTACLE AS-CONNECTOR (31-PIN) | ||
| 245-1042 | [1] | PLUG AS-CONNECTOR (64-PIN) | ||
| 245-1043 | [1] | PLUG GP-CONNECTOR (64-PIN) | ||
| (EACH PLUG AS INCLUDES) | ||||
| 267-7207 M | [1] | BOLT-SPECIAL (M6X1-THD) | ||
| 267-7208 | [1] | RING-RETAINING | ||
| 274-7990 | [1] | PLATE-COVER | ||
| 273-3143 | [1] | PLUG AS-CONNECTOR (3-PIN) | ||
| 245-1048 | [65] | PLUG-CONNECTOR (1-PIN) | ||
| 8T-8737 | [16] | PLUG-SEAL | ||
| 134-2540 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| 177-9645 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 265-4123 | [1] | RECEPTACLE AS-CONNECTOR (9-PIN) | ||
| 238-9397 | [1] | RESISTOR AS | ||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 185-1861 | SEAL-WIRE | |||
| 274-3776 | [1] | CAP-SEAL | ||
| 100-6674 | [2] | SEAL-CONNECTOR | ||
| 8T-8730 | [39] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9W-0844 | [3] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 180-9340 | [46] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 267-9572 | [63] | SOCKET-CONNECTION (18-GA) | ||
| 124-5640 | [2] | TERMINAL-SOCKET | ||
| 3S-2093 | [3] | STRAP-CABLE | ||
| 141-8061 B | TAPE | |||
| 1P-0810 B | TAPE-ELECTRICAL | |||
| 176-1521 | [3] | TERMINAL | ||
| 5P-1478 | [1] | TERMINAL-FORK (10-GA TO 12-GA, NO. 10 SCREW) | ||
| 2L-8067 | [1] | TERMINAL-RING (10-GA TO 12-GA, 1/4-IN SCREW) | ||
| 2L-8069 | [1] | TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW) | ||
| 2L-8079 | [2] | TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW) | ||
| 7N-9017 | [3] | TERMINAL-RING (18-GA TO 22-GA, NO. 10 SCREW) | ||
| 091-2436 | [4] | TERMINAL-BLADE (18-GA TO 22-GA) | ||
| E | TUBE (28-CM) | |||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(50-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM) | |||
| 270-2679 | [1] | LOCKWASHER | ||
| 13. | 292-4251 | [4] | SCREW-TRUSS HEAD (M8X1.25X60-MM) | |
| 14. | 297-5257 | [1] | BRACKET AS | |
| 15. | 298-0663 | [4] | CLIP (LADDER) | |
| 16. | 321-1380 | [1] | BRACKET | |
| 17. | 9X-2043 CM | [1] | SCREW-TRUSS HEAD (M6X1X14-MM) | |
| 18. | 132-5789 | [5] | CLIP (LADDER) | |
| 19. | 277-1873 | [1] | CLIP (LADDER) | |
| 20. | 2W-9372 C | [4] | LOCKWASHER | |
| 21. | 3J-4818 C | [1] | LOCKWASHER | |
| 22. | 3S-2093 | [32] | STRAP-CABLE | |
| 23. | 4P-7428 | [1] | CLIP (LADDER) | |
| 24. | 4P-7429 | [1] | CLIP (LADDER) | |
| 25. | 4P-7581 | [3] | CLIP (LADDER) | |
| 26. | 4P-8134 | [1] | CLIP (LADDER) | |
| 27. | 5C-2874 M | [2] | NUT (M5X0.8-THD) | |
| 29. | 5C-7261 M | [4] | NUT (M8X1.25-THD) | |
| 30. | 5P-4116 | [1] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 31. | 5P-6459 | [1] | GROMMET | |
| 32. | 5T-6374 | [1] | SPACER (11X20X40-MM THK) | |
| 33. | 6V-7359 | [1] | GROMMET (25-MM ID, 37-MM OD) | |
| 34. | 8D-9671 | [1] | CLIP | |
| 35. | 8F-1434 | [2] | LOCKWASHER | |
| 36. | 8T-0328 | [2] | WASHER-HARD (5.5X10X1-MM THK) | |
| 37. | 8T-4121 | [8] | WASHER-HARD (11X21X2.5-MM THK) | |
| 38. | 8T-4137 M | [5] | BOLT (M10X1.5X20-MM) | |
| 39. | 8T-4189 CM | [2] | BOLT (M8X1.25X20-MM) | |
| 40. | 8T-4192 M | [4] | BOLT (M12X1.75X25-MM) | |
| 41. | 8T-4195 M | [1] | BOLT (M10X1.5X30-MM) | |
| 42. | 8T-4223 | [5] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 43. | 8T-4224 | [3] | WASHER-HARD (8.8X16X2-MM THK) | |
| 45. | 8T-5093 M | [1] | BOLT-LOCKING (M8X1.25X25-MM) | |
| 46. | 8T-6869 M | [1] | BOLT (M8X1.25X60-MM) | |
| 47. | 9N-0869 | [5] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| 48. | 7F-9223 C | [1] | LOCKWASHER | |
| 49. | 8F-3590 C | [2] | LOCKWASHER | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP46100151
290-6785: WIRING GP-ENGINE
290-6785 WIRING GP-ENGINE -DELUXE CAB
S/N PRA1-UP
PART OF 294-4947, 294-4948 CAB AR-ENCLOSED ROPS
AN ATTACHMENT
S/N PRA1-UP
PART OF 294-4947, 294-4948 CAB AR-ENCLOSED ROPS
AN ATTACHMENT
For full view, you need register
Parts for your 420E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 134-0404 | [1] | SWITCH AS-PRESSURE (HYDRAULIC OIL FILTER BYPASS) | |
| 2. | 173-7003 | [1] | RELAY AS-TIMER (STABILIZER, AUTO UP) | |
| 3. | 250-1448 | [1] | CONNECTOR (ORFS) | |
| 4. | 264-4297 | [1] | SENSOR AS-TEMPERATURE (2-PIN)(HYDRAULIC OIL) | |
| 137-6645 | [1] | PAD-CONNECTOR | ||
| 5. | 273-3284 | [1] | INDICATOR AS (HYD OIL TEMP, FILTER) | |
| 111-7899 | [1] | GASKET | ||
| 6. | 132-5789 | [1] | CLIP (LADDER) | |
| 7. | 3J-1907 | [1] | SEAL-O-RING | |
| 8. | 3K-0360 | [1] | SEAL-O-RING | |
| 9. | 6K-0806 | [1] | STRAP-CABLE |
#SEBP46100152
328-1895: WIRING GP-ENGINE
For full view, you need register
#SEBP46100153
328-1895: WIRING GP-ENGINE
328-1895 WIRING GP-ENGINE
S/N C4E6834-UP
PART OF 288-5219, 435-1669 ENGINE AR-PRIMARY
S/N C4E6834-UP
PART OF 288-5219, 435-1669 ENGINE AR-PRIMARY
For full view, you need register
#SEBP46100154
211-4260: WIRING GP-EXTENDABLE STICK
211-4260 WIRING GP-EXTENDABLE STICK
S/N PRA1-UP
PART OF 271-1402 STICK GP-EXTENDABLE
AN ATTACHMENT
S/N PRA1-UP
PART OF 271-1402 STICK GP-EXTENDABLE
AN ATTACHMENT
For full view, you need register
Parts for your 420E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 290-6806 | [1] | HARNESS AS-SENSOR (EXTENDABLE STICK) | |
| 6V-8523 E | HOSE (250-CM) | |||
| 9X-3401 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [3] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 8T-8737 | [1] | PLUG-SEAL | ||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 180-9340 | [3] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 8T-6885 E | TUBE-HEAT SHRINK (19.05-MM DIA)(10-CM) | |||
| 2. | 3S-2093 | [2] | STRAP-CABLE | |
| E | ORDER BY THE CENTIMETER | |||
#SEBP46100155
246-8042: WIRING GP-GRADE CONTROL
246-8042 WIRING GP-GRADE CONTROL
S/N PRA1-UP
PART OF 299-3278 BACKHOE AR-EXTENDABLE STICK, 299-3277 BACKHOE AR-STANDARD STICK
Type 1
AN ATTACHMENT
S/N PRA1-UP
PART OF 299-3278 BACKHOE AR-EXTENDABLE STICK, 299-3277 BACKHOE AR-STANDARD STICK
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your 420E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5P-0599 | [1] | CLAMP-BAND | |
| 2. | 5P-3860 | [2] | CLAMP-HOSE | |
| 3. | 9R-2053 | [3] | BLOCK | |
| 4. | 177-2215 B | [11] | STRAP-DUAL CLAMP | |
| 5. | 268-7761 | [1] | HARNESS AS-PLATFORM (DISPLAY) | |
| 6V-8523 E | HOSE (124-CM) | |||
| 9W-0852 | [1] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3401 | [16] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2265 | [1] | KIT-CONNECTING PLUG (8-PIN) | ||
| 155-2271 | [2] | KIT-CONNECTING PLUG (4-PIN) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 8T-8737 | [8] | PLUG-SEAL | ||
| 102-8806 | [1] | KIT-RECEPTACLE (8-PIN) | ||
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (EACH RECEPTACLE KIT INCLUEDS RECEPTACLE AS & WEDGE) | ||||
| 9W-0844 | [1] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 180-9340 | [18] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 8L-8413 | [3] | STRAP-CABLE (WHITE) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(35-CM) | |||
| 125-7876 E | TUBE-HEAT SHRINK (17.78-MM DIA)(5-CM) | |||
| 6. | 1S-6420 | [1] | CLIP | |
| 7. | 3S-2093 | [24] | STRAP-CABLE | |
| 9. | 4P-7581 | [1] | CLIP (LADDER) | |
| 10. | 7K-1181 | [12] | STRAP-CABLE | |
| 12. | 232-1792 | [1] | HORN (24-VOLT TO 12-VOLT) | |
| 13. | 290-6804 | [1] | HARNESS AS-SENSOR (SWING) | |
| 5P-0767 E | HOSE (208-CM) | |||
| 9X-3401 E | [6] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUEDS RECEPTACLE AS & WEDGE) | ||||
| 180-9340 | [6] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 1P-0810 B | TAPE-ELECTRICAL | |||
| 6V-2722 D | TUBE-HEAT SHRINK (25.4-MM DIA)(0.1-M) | |||
| 14. | 290-6805 | [1] | HARNESS AS-SENSOR (BOOM, STICK, BUCKET) | |
| 5P-0767 E | HOSE (107-CM) | |||
| 6V-8523 E | HOSE (105-CM) | |||
| 9X-3401 | [6] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 155-2271 | [4] | KIT-CONNECTING PLUG (4-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 8T-8737 | [4] | PLUG-SEAL | ||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUEDS RECEPTACLE AS & WEDGE) | ||||
| 180-9340 | [12] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(13-CM) | |||
| 6V-2722 D | TUBE-HEAT SHRINK (25.4-MM DIA)(0.1-M) | |||
| 15. | 305-3103 | [1] | GUARD | |
| 16. | 305-3104 | [2] | SLEEVE-ABRASION | |
| 17. | 305-3102 B | [6] | GUARD | |
| B | USE AS REQUIRED | |||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
#SEBP46100156
246-8042: WIRING GP-GRADE CONTROL
246-8042 WIRING GP-GRADE CONTROL
S/N PRA1-UP
PART OF 299-3278 BACKHOE AR-EXTENDABLE STICK, 299-3277 BACKHOE AR-STANDARD STICK
Type 2
AN ATTACHMENT
S/N PRA1-UP
PART OF 299-3278 BACKHOE AR-EXTENDABLE STICK, 299-3277 BACKHOE AR-STANDARD STICK
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your 420E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5P-0599 | [1] | CLAMP-BAND | |
| 2. | 5P-3860 | [2] | CLAMP-HOSE | |
| 3. | 9R-2053 | [3] | BLOCK | |
| 4. | 177-2215 B | [11] | STRAP-DUAL CLAMP | |
| 5. | 268-7761 | [1] | HARNESS AS-PLATFORM (DISPLAY) | |
| 6V-8523 E | HOSE (124-CM) | |||
| 9W-0852 | [1] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3401 | [16] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [16] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2265 | [1] | KIT-CONNECTING PLUG (8-PIN) | ||
| 155-2271 | [2] | KIT-CONNECTING PLUG (4-PIN) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 8T-8737 | [8] | PLUG-SEAL | ||
| 102-8806 | [1] | KIT-RECEPTACLE (8-PIN) | ||
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9W-0844 | [1] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 180-9340 | [18] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 8L-8413 | [3] | STRAP-CABLE (WHITE) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(35-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM) | |||
| 6. | 1S-6420 | [1] | CLIP | |
| 7. | 3S-2093 | [24] | STRAP-CABLE | |
| 9. | 4P-7581 | [1] | CLIP (LADDER) | |
| 10. | 7K-1181 | [12] | STRAP-CABLE | |
| 12. | 232-1792 | [1] | HORN (24-VOLT TO 12-VOLT) | |
| 13. | 290-6804 | [1] | HARNESS AS-SENSOR (SWING) | |
| 7I-1024 E | GUARD-HOSE (164-CM) | |||
| 5P-0767 E | HOSE (208-CM) | |||
| 9X-3401 | [6] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 126-1767 | [6] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 180-9340 | [6] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 1P-0810 B | TAPE-ELECTRICAL | |||
| 6V-2722 D | TUBE-HEAT SHRINK (25.4-MM DIA)(0.1-M) | |||
| 14. | 290-6805 | [1] | HARNESS AS-SENSOR (BOOM, STICK, BUCKET) | |
| 5P-0767 E | HOSE (107-CM) | |||
| 6V-8523 E | HOSE (105-CM) | |||
| 9X-3401 | [6] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [6] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2271 | [4] | KIT-CONNECTING PLUG (4-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 8T-8737 | [4] | PLUG-SEAL | ||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 180-9340 | [12] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(13-CM) | |||
| 6V-2722 D | TUBE-HEAT SHRINK (25.4-MM DIA)(0.1-M) | |||
| 16. | 305-3104 | [2] | SLEEVE-ABRASION | |
| 17. | 305-3102 B | [6] | GUARD | |
| 18. | 212-3416 C | [3] | SCREW-PAN HEAD (8-16X0.5-IN) | |
| 19. | 206-1649 C | [1] | BRACKET | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
#SEBP46100157
290-6729: WIRING GP-HEATER
290-6729 WIRING GP-HEATER
S/N PRA1-UP
PART OF 294-4946, 294-4947 CAB AR-ENCLOSED ROPS
AN ATTACHMENT
S/N PRA1-UP
PART OF 294-4946, 294-4947 CAB AR-ENCLOSED ROPS
AN ATTACHMENT
For full view, you need register
Parts for your 420E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-8799 | [1] | BOOT (RED) | |
| 2. | 214-4695 | [1] | SWITCH AS-ROCKER (BLOWER FAN SPEED) | |
| 3. | 214-4703 | [1] | SWITCH AS-ROCKER (HEATER) | |
| (EACH SWITCH AS INCLUDES) | ||||
| 111-7899 | [1] | GASKET | ||
| 4. | 275-0570 | [1] | BAR-BUS | |
| 5. | 290-6728 | [1] | HARNESS AS-MOTOR | |
| 122-4401 | [1] | TERMINAL | ||
| 091-2436 | [11] | TERMINAL-BLADE (18-GA TO 22-GA) | ||
| 104-1995 | [7] | TERMINAL-BLADE (14-GA TO 18-GA) | ||
| 9X-1055 | [2] | TERMINAL-RECEPTACLE (12-GA) | ||
| 100-5041 | [2] | TERMINAL-RECEPTACLE (18-GA TO 20-GA) | ||
| 111-6792 | [3] | TERMINAL-RECEPTACLE (18-GA TO 20-GA) | ||
| 2L-8069 | [1] | TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW) | ||
| 2L-8067 | [1] | TERMINAL-RING (10-GA TO 12-GA, 1/4-IN SCREW) | ||
| 228-5856 | [2] | CONNECTOR (10-PIN) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 177-9648 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| 177-9656 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 3S-2093 | [3] | STRAP-CABLE | ||
| 8T-8737 | [1] | PLUG-SEAL | ||
| 9X-1054 | [1] | PLUG AS-CONNECTOR (4-PIN) | ||
| 111-6795 | [1] | HOUSING-RELAY | ||
| 111-6816 | [1] | LOCK | ||
| 186-3735 | [8] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(20-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM) | |||
| 141-8061 B | TAPE | |||
| 213-0139 | [5] | PIN (4-MM) | ||
| 6. | 115-1615 | [1] | RELAY AS (12-VOLT)(POWER DISTRIBUTION) | |
| 7. | 138-8454 M | [1] | SCREW-TRUSS HEAD (M4X0.7X10-MM) | |
| 8. | 8T-9534 M | [1] | BOLT (M6X1X50-MM) | |
| 9. | 276-7287 Y | [1] | RELAY GP (12-VOLT)(POWER DISTRIBUTION) | |
| 10. | 3S-2093 | [8] | STRAP-CABLE | |
| 11. | 4B-4863 | [1] | WASHER (4.7X11X1.2-MM THK) | |
| 12. | 5C-2890 M | [1] | NUT (M6X1-THD) | |
| 13. | 5C-7261 M | [1] | NUT (M8X1.25-THD) | |
| 14. | 8T-4171 M | [1] | BOLT (M6X1X12-MM) | |
| 15. | 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 16. | 8T-4224 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP46100158
211-4262: WIRING GP-KICKOUT & POSITIONER
211-4262 WIRING GP-KICKOUT & POSITIONER
S/N PRA1-UP
PART OF 318-9554 LOADER AR
S/N PRA1-UP
PART OF 318-9554 LOADER AR
For full view, you need register
Parts for your 420E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 118-7790 | [1] | BRACKET AS | |
| 2. | 206-1486 | [1] | SWITCH AS-ROLLER (KICKOUT, POSITIONER) | |
| 2H-3922 | [1] | LOCKWASHER | ||
| 6V-8363 | [2] | SCREW (10-32X0.312-IN) | ||
| 6V-8370 | [1] | NUT-HEX (3/4-32-THD) | ||
| 8F-1434 | [2] | LOCKWASHER | ||
| 9X-0199 | [1] | BOOT-SWITCH | ||
| 3. | 233-7977 | [1] | HARNESS AS-WIRING (KICKOUT, POSITIONER) | |
| 6V-8523 E | HOSE (453-CM) | |||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [1] | PLUG-SEAL | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 5P-1476 | [2] | TERMINAL-FORK (14-GA TO 16-GA, NO. 10 SCREW) | ||
| 6V-2722 D | TUBE-HEAT SHRINK (25.4-MM DIA)(0.1-M) | |||
| 4. | 3S-2093 | [35] | STRAP-CABLE | |
| 5. | 8T-4138 M | [2] | BOLT (M6X1X20-MM) | |
| 6. | 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 7. | 290-6801 C | [1] | HARNESS AS-WIRING (RETURN TO DIG) | |
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
| (ECAH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 8T-8737 | [1] | PLUG-SEAL | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8730 | [6] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 189-3158 | [1] | SUPPRESSOR-ARC | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM) | |||
| 8. | 9X-7344 | [1] | GROMMET | |
| 9. | 160-2246 G | SLEEVE-ABRASION (11.9-IN) | ||
| 10. | 7K-1181 C | [1] | STRAP-CABLE | |
| 11. | 6K-0806 | [2] | STRAP-CABLE | |
| 12. | 8T-4196 M | [1] | BOLT (M10X1.5X35-MM) | |
| 13. | 4P-7429 | [1] | CLIP (LADDER) | |
| 14. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 15. | 205-9920 | [1] | STRAP-CABLE | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| G | ORDER BY THE INCH | |||
| M | METRIC PART | |||
#SEBP46100159
290-6720: WIRING GP-PLATFORM
290-6720 WIRING GP-PLATFORM
S/N PRA1-UP
PART OF 294-4946, 294-4947, 294-4948 CAB AR-ENCLOSED ROPS, 294-4944, 294-4945 CANOPY AR-OPEN ROPS
Type 1
AN ATTACHMENT
S/N PRA1-UP
PART OF 294-4946, 294-4947, 294-4948 CAB AR-ENCLOSED ROPS, 294-4944, 294-4945 CANOPY AR-OPEN ROPS
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your 420E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1S-9593 | [3] | STRAP-CABLE | |
| 2. | 6I-1418 | [4] | SPACER (8.2X12.7X28.7-MM THK) | |
| 3. | 7K-1181 | [47] | STRAP-CABLE | |
| 4. | 7T-4848 | [1] | FLASHER AS (12-VOLT) | |
| 5. | 8T-8799 | [6] | BOOT (RED) | |
| 6. | 8T-9655 | [8] | MOUNT-ISOLATION | |
| 7. | 132-1806 | [1] | STRAP AS-GROUND | |
| 8. | 146-9439 | [1] | RELAY AS (12-VOLT)(IMPLEMENT DISABLE) | |
| 8A. | 146-9439 | [1] | RELAY AS (12-VOLT)(POSITION LAMP) | |
| 8B. | 146-9439 | [1] | RELAY AS (12-VOLT)(HORN) | |
| 8C. | 146-9439 | [1] | RELAY AS (12-VOLT)(BACKUP ALARM) | |
| 9. | 268-1964 | [1] | KIT-SERVICE METER | |
| (INCLUDES METER & FILM) | ||||
| 10. | 172-9200 | [1] | SUPPRESSOR-ARC | |
| 11. | 178-7539 | [1] | RECEPTACLE AS (POWER SUPPLY) | |
| 12. | 179-6401 | [4] | SCREW-PAN HEAD (6-32X0.5-IN) | |
| 13. | 180-9900 | [1] | CAP AS | |
| 5P-7958 | [1] | SLEEVE-CABLE SPLICE | ||
| 8C-6354 | [1] | CAP-RECEPTACLE (ET CONNECTOR) | ||
| 179-9392 | LANYARD | |||
| 14. | 201-1024 | [1] | BRACKET | |
| 15. | 206-1345 | [3] | STRAP-CABLE | |
| 16. | 206-1718 | [1] | BRACKET AS | |
| 17. | 212-0862 | [3] | CLAMP-CABLE | |
| 18. | 214-4694 | [1] | SWITCH AS-ROCKER (MODE SELECT) | |
| 19. | 214-4702 | [1] | SWITCH AS-ROCKER (HAZARD WARNING LIGHTS) | |
| 20. | 214-4716 | [1] | SWITCH AS-ROCKER (TRANSMISSION NEUTRAL LOCK) | |
| (EACH SWITCH AS INCLUDES) | ||||
| 111-7899 | [1] | GASKET | ||
| 21. | 214-4717 | [1] | INDICATOR AS (LH TURN SIGNAL, PARKING BRAKE) | |
| 22. | 214-4723 | [1] | INDICATOR AS (RH TURN SIGNAL, HIGH BEAM) | |
| (EACH INDICATOR AS INCLUDES) | ||||
| 111-7899 | [1] | GASKET | ||
| 23. | 216-9069 | [1] | BRACKET AS | |
| 6V-9632 M | [1] | NUT-WELD (M6X1-THD) | ||
| 24. | 227-1057 | [10] | PLUG | |
| 25. | 246-2671 | [1] | SWITCH AS-MULTIFUNCTION (HD LIGHT, TURN SIG, WDO WIPER) | |
| 26. | 247-8199 Y | [1] | PANEL GP-FUSE | |
| 27. | 263-9498 | [1] | HARNESS AS-WIRING (RESISTOR) | |
| 9X-3401 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 180-9340 | [2] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 102-8806 | [1] | KIT-RECEPTACLE (8-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8737 | [7] | PLUG-SEAL | ||
| 134-2540 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 28. | 267-2701 | [1] | FUSE (60-AMPERE) | |
| 29. | 268-7759 | [1] | HARNESS AS-POWER | |
| 2L-8067 | [1] | TERMINAL-RING (10-GA TO 12-GA, 1/4-IN SCREW) | ||
| 128-4178 | [3] | TERMINAL AS | ||
| (EACH INCLUDES) | ||||
| 5P-6006 D | TUBE-HEAT SHRINK (9.52-MM DIA)(1-M) | |||
| 128-4168 | [1] | TERMINAL AS | ||
| 6V-9023 E | TUBE-HEAT SHRINK (12.7-MM DIA)(4-CM) | |||
| 152-5532 | [2] | TERMINAL AS | ||
| (EACH INCLUDES) | ||||
| 5P-6006 D | TUBE-HEAT SHRINK (9.52-MM DIA)(0.1-M) | |||
| 3S-2093 | [1] | STRAP-CABLE | ||
| 30. | 274-9872 | [1] | FUSE (30-AMPERE) | |
| 31. | 275-0553 | [1] | BAR-BUS | |
| 32. | 275-0570 | [1] | BAR-BUS | |
| 33. | 276-7290 Y | [1] | RELAY GP (12-VOLT)(POWER, 1) | |
| 34. | 278-0461 | [1] | RELAY AS (12-VOLT)(TORQUE LIMITER) | |
| 35. | 290-6721 | [1] | HARNESS AS-PLATFORM | |
| 122-4401 | [1] | TERMINAL | ||
| 2L-8067 | [3] | TERMINAL-RING (10-GA TO 12-GA, 1/4-IN SCREW) | ||
| 2L-8069 | [3] | TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW) | ||
| 2L-8077 | [1] | TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW) | ||
| 2L-8079 | [3] | TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW) | ||
| 5P-4571 | [5] | TERMINAL-BLADE (14-GA TO 16-GA) | ||
| 7N-7221 | [3] | TERMINAL-BLADE (18-GA TO 22-GA) | ||
| 091-2436 | [45] | TERMINAL-BLADE (18-GA TO 22-GA) | ||
| 104-1995 | [4] | TERMINAL-BLADE (14-GA TO 18-GA) | ||
| 9X-1055 | [2] | TERMINAL-RECEPTACLE (12-GA) | ||
| 9X-1056 | [2] | TERMINAL-RECEPTACLE (14-GA TO 16-GA) | ||
| 111-6792 | [5] | TERMINAL-RECEPTACLE (18-GA TO 20-GA) | ||
| 111-6793 | [1] | TERMINAL-RECEPTACLE (14-GA TO 16-GA) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(170-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(35-CM) | |||
| 126-1766 | [94] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 126-1774 | [2] | COVER-CONNECTOR | ||
| 128-4123 | [6] | SEAL-CABLE | ||
| 128-5016 | [34] | SEAL-CABLE | ||
| 141-8061 B | TAPE | |||
| 147-1445 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 147-1446 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| (EACH PLUG AS INCLUDES) | ||||
| 159-9322 | [1] | SEAL-O-RING | ||
| 155-2255 | [6] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2270 | [11] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2271 | [4] | KIT-CONNECTING PLUG (4-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 9X-4813 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| 100-5805 | [1] | CAP-RECEPTACLE (3-PIN) | ||
| 110-0203 | [9] | CONNECTOR AS (18-GA, BLACK) | ||
| 111-6795 | [2] | HOUSING-RELAY | ||
| 111-6816 | [2] | LOCK | ||
| 186-3735 | [54] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 186-3736 | [86] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9W-0852 | [1] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 9W-0844 | [5] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(46-CM) | |||
| 102-8802 | [4] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| 102-8801 | [2] | KIT-RECEPTACLE (12-PIN) | ||
| (EACH RECEPTACLE AS INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3S-2093 | [14] | STRAP-CABLE | ||
| 7R-2751 | [16] | PLUG-CONNECTOR (1-PIN) | ||
| 186-3736 | [8] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [106] | PLUG-SEAL | ||
| 9W-1951 | [1] | RECEPTACLE-CONNECTOR (9-PIN) | ||
| 9X-1054 | [1] | PLUG AS-CONNECTOR (4-PIN) | ||
| 36. | 290-6733 | [1] | BRACKET AS | |
| 37. | 290-6739 | [1] | BRACKET AS | |
| 38. | 311-7567 Y | [1] | RELAY GP (12-VOLT)(POWER, 2) | |
| 39. | 324-9746 | [1] | FILM-IDENTIFICATION (FUSE BLOCK) | |
| 40. | 096-6166 | [8] | WASHER-HARD (4.5X9X1-MM THK) | |
| 41. | 115-1615 | [1] | RELAY AS (12-VOLT)(START) | |
| 42. | 132-5789 | [1] | CLIP (LADDER) | |
| 43. | 138-8454 M | [2] | SCREW-TRUSS HEAD (M4X0.7X10-MM) | |
| 44. | 156-6175 | [2] | CLIP (LADDER) | |
| 45. | 170-9360 | [1] | GROMMET | |
| 46. | 8T-9534 M | [3] | BOLT (M6X1X50-MM) | |
| 47. | 274-7409 M | [4] | SCREW-TRUSS HEAD (M8X1.25X45-MM) | |
| 48. | 275-0490 Y | [1] | RELAY GP (12-VOLT)(POWER, 3) | |
| 49. | 3S-2093 | [24] | STRAP-CABLE | |
| 50. | 4B-4863 | [2] | WASHER (4.7X11X1.2-MM THK) | |
| 51. | 4P-7581 | [1] | CLIP (LADDER) | |
| 52. | 4P-8134 | [1] | CLIP (LADDER) | |
| 53. | 5C-2890 M | [7] | NUT (M6X1-THD) | |
| 54. | 5C-7261 M | [11] | NUT (M8X1.25-THD) | |
| 55. | 5C-9553 M | [3] | BOLT (M6X1X16-MM) | |
| 56. | 7X-0579 | [8] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| 57. | 7X-7729 | [4] | WASHER (11X25X3-MM THK) | |
| 58. | 8C-3398 | [7] | LOCKWASHER | |
| 59. | 8F-3590 | [4] | LOCKWASHER | |
| 60. | 8T-0352 M | [2] | BOLT (M5X0.8X45-MM) | |
| 61. | 8T-4121 | [6] | WASHER-HARD (11X21X2.5-MM THK) | |
| 62. | 8T-4133 M | [2] | NUT (M10X1.5-THD) | |
| 63. | 8T-4137 M | [2] | BOLT (M10X1.5X20-MM) | |
| 64. | 8T-4138 M | [7] | BOLT (M6X1X20-MM) | |
| 65. | 8T-4195 M | [2] | BOLT (M10X1.5X30-MM) | |
| 66. | 8T-4200 M | [4] | BOLT (M8X1.25X16-MM) | |
| 67. | 8T-4205 | [20] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 68. | 8T-4224 | [11] | WASHER-HARD (8.8X16X2-MM THK) | |
| 69. | 9F-5644 | [4] | LOCKWASHER | |
| 70. | 103-2543 E | SEAL (5-CM) | ||
| 71. | 5P-7070 D | INSULATION-STRIP (0.05-M EACH) | ||
| 71A. | 5P-7070 D | INSULATION-STRIP (0.1-M) | ||
| B | USE AS REQUIRED | |||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
Information:
ELECTRICAL AND STARTING SYSTEM
WIRING GP
Special Instruction
Tool Operating Manual
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
