ELECTRICAL AND STARTING SYSTEM
SENSOR GPLIGHTING GP
CONVERTER GP-ELECTRICAL
ELECTRONICS GP-MACHINE
ELECTRONICS GP-COMMUNICATION
ELECTRONICS GP-POWER TRAIN
GLOW PLUG GP
HARNESS GP
ELECTRICAL AND STARTING SYSTEM
SENSOR GP
#SEBP46140160
3E-7843: CONTROL GP-POSITION
3E-7843 CONTROL GP-POSITION -WORK TOOL
S/N BYD1-UP; FTD1-UP
PART OF 113-3652, 235-6820 KICKOUT & POSITIONER GP
S/N BYD1-UP; FTD1-UP
PART OF 113-3652, 235-6820 KICKOUT & POSITIONER GP
For full view, you need register
Parts for your 928HZ WHEEL LOADER:
CATERPILLAR SIS#SEBP46140161
321-0549: CONVERSION AR-LIGHTING
For full view, you need register
Parts for your 928HZ WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4Y-5561 | [4] | SPRING | |
| 2. | 7K-1181 | [18] | STRAP-CABLE | |
| 3. | 9R-1499 | [2] | REFLECTOR (RED) | |
| 4. | 194-3084 | [1] | HARNESS AS-LIGHTING (STOP, TAIL, TURN, BACKUP)(RH) | |
| 9X-3401 | [5] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 8T-8737 | [1] | PLUG-SEAL | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9X-3402 | [7] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 5. | 194-4640 | [2] | COVER AS | |
| (EACH INCLUDES) | ||||
| 5G-1174 | [1] | LATCH AS | ||
| 194-4644 | [1] | COVER AS (LH) | ||
| 8T-3490 M | [2] | NUT-WELD (M10X1.5-THD) | ||
| 6. | 194-4642 | [1] | PLATE AS (LH) | |
| 7T-1099 | [1] | LINK | ||
| 8T-3490 M | [5] | NUT-WELD (M10X1.5-THD) | ||
| 7. | 194-4643 | [1] | PLATE AS (RH) | |
| 7T-1099 | [1] | LINK | ||
| 8T-3490 M | [5] | NUT-WELD (M10X1.5-THD) | ||
| 8. | 224-0873 | [1] | COVER (LH) | |
| 9. | 224-0874 | [1] | COVER (RH) | |
| 10. | 273-3572 Y | [1] | LAMP GP-REAR (COMBINATION, LH) | |
| 11. | 273-3573 Y | [1] | LAMP GP-REAR (COMBINATION, RH) | |
| 12. | 297-1270 | [2] | BRACKET AS | |
| 13. | 297-1273 | [1] | BRACKET AS (RH) | |
| 6V-9632 M | [4] | NUT-WELD (M6X1-THD) | ||
| 14. | 297-1280 | [2] | PLATE AS | |
| 15. | [1] | BRACKET AS (LH) | ||
| 6V-9632 M | [4] | NUT-WELD (M6X1-THD) | ||
| 16. | 301-8277 | [1] | HOUSING (LH) | |
| 17. | 301-8278 | [1] | HOUSING (RH) | |
| 18. | 186-0815 M | [12] | BOLT (M6X1X20-MM) | |
| 19. | 186-0817 | [12] | WASHER-HARD (7X19X2-MM THK) | |
| 20. | 194-3085 | [1] | HARNESS AS-LIGHTING (STOP, TAIL, TURN, BACKUP)(LH) | |
| 9X-3401 | [5] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [5] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 8T-8737 | [1] | PLUG-SEAL | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9X-3402 | [7] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [7] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 21. | 4P-8134 | [4] | CLIP (LADDER) | |
| 22. | 7X-7729 | [20] | WASHER (11X25X3-MM THK) | |
| 23. | 8T-4121 | [10] | WASHER-HARD (11X21X2.5-MM THK) | |
| 24. | 8T-4136 M | [22] | BOLT (M10X1.5X25-MM) | |
| 25. | 8T-4137 M | [8] | BOLT (M10X1.5X20-MM) | |
| 26. | 8T-4196 M | [2] | BOLT (M10X1.5X35-MM) | |
| 27. | 9R-2807 | [2] | CLIP (RETAINER) | |
| 28. | 9R-7138 | [2] | PIN-CLEVIS | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP46140162
207-5947: CONVERTER GP-ELECTRICAL
207-5947 CONVERTER GP-ELECTRICAL
S/N BYD1-UP; FTD1-UP
PART OF 225-4329 INSTALLATION GP-RADIO
CANNOT BE USED WITH @@@@@225-4329@@@@@
AN ATTACHMENT
S/N BYD1-UP; FTD1-UP
PART OF 225-4329 INSTALLATION GP-RADIO
CANNOT BE USED WITH @@@@@225-4329@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your 928HZ WHEEL LOADER:
CATERPILLAR SIS#SEBP46140163
289-8802: ELECTRONICS AR-MACHINE
289-8802 ELECTRONICS AR-MACHINE
S/N BYD1-UP; FTD1-UP
PART OF 289-8870, 289-8890, 289-8899 COMMON AR
S/N BYD1-UP; FTD1-UP
PART OF 289-8870, 289-8890, 289-8899 COMMON AR
For full view, you need register
Parts for your 928HZ WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 322-6842 Y | [1] | ELECTRONICS GP-POWER TRAIN (MACHINE CONTROL) | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP46140164
262-1421: ELECTRONICS GP-COMMUNICATION
262-1421 ELECTRONICS GP-COMMUNICATION -PRODUCT LINK 300
S/N BYD1-UP; FTD1-UP
PART OF 273-4068 INSTALLATION AR-COMMUNICATION, 326-7439 INSTALLATION GP-COMMUNICATION
AN ATTACHMENT
S/N BYD1-UP; FTD1-UP
PART OF 273-4068 INSTALLATION AR-COMMUNICATION, 326-7439 INSTALLATION GP-COMMUNICATION
AN ATTACHMENT
For full view, you need register
Parts for your 928HZ WHEEL LOADER:
CATERPILLAR SIS#SEBP46140165
308-6182: ELECTRONICS GP-COMMUNICATION
308-6182 ELECTRONICS GP-COMMUNICATION
S/N FTD1-UP
PART OF 335-1412, 335-1413 INSTALLATION AR-COMMUNICATION
AN ATTACHMENT
S/N FTD1-UP
PART OF 335-1412, 335-1413 INSTALLATION AR-COMMUNICATION
AN ATTACHMENT
For full view, you need register
Parts for your 928HZ WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 319-4471 | [1] | SERVICE GP-COMMUNICATION | ||
| (INCLUDES CONTROL GP & SOFTWARE GP) | ||||
#SEBP46140166
322-6842: ELECTRONICS GP-POWER TRAIN
322-6842 ELECTRONICS GP-POWER TRAIN -MACHINE CONTROL
S/N BYD1-UP; FTD1-UP
PART OF 289-8802 ELECTRONICS AR-MACHINE
S/N BYD1-UP; FTD1-UP
PART OF 289-8802 ELECTRONICS AR-MACHINE
For full view, you need register
Parts for your 928HZ WHEEL LOADER:
CATERPILLAR SIS#SEBP46140167
277-4410: GLOW PLUG GP
277-4410 GLOW PLUG GP
S/N C6E1-UP
PART OF 301-3360, 435-1670 ENGINE AR-PRIMARY
AN ATTACHMENT
S/N C6E1-UP
PART OF 301-3360, 435-1670 ENGINE AR-PRIMARY
AN ATTACHMENT
For full view, you need register
Parts for your 928HZ WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 226-8770 | [6] | GLOW PLUG (24-VOLT) | |
| 2. | 277-4407 | [1] | BAR AS | |
| 2A. | 277-4408 | [1] | LEAD | |
| 2B. | 5C-2890 M | [1] | NUT (M6X1-THD) | |
| 3. | 283-4693 | [12] | SEAL-O-RING | |
| 4. | 275-2428 | [1] | INSULATOR | |
| 5. | 5C-2890 M | [2] | NUT (M6X1-THD) | |
| 6. | 277-4409 | [1] | CAP | |
| 7. | 067-6269 | [6] | FERRULE | |
| 8. | 100-4838 M | [1] | BOLT (M6X1X20-MM) | |
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP46140168
277-4410: GLOW PLUG GP
277-4410 GLOW PLUG GP
S/N C6E1-UP
PART OF 292-5305, 301-3361 ENGINE AR-PRIMARY
AN ATTACHMENT
S/N C6E1-UP
PART OF 292-5305, 301-3361 ENGINE AR-PRIMARY
AN ATTACHMENT
For full view, you need register
Parts for your 928HZ WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 067-6070 | [1] | WASHER | |
| 2. | 100-4838 M | [1] | BOLT (M6X1X20-MM) | |
| 3. | 5C-2890 M | [2] | NUT (M6X1-THD) | |
| 4. | 275-2428 | [1] | INSULATOR | |
| 5. | 277-4409 | [1] | CAP | |
| 6. | 368-3150 | [1] | BUS BAR GP | |
| 368-3145 | [1] | BUS BAR AS | ||
| 277-4408 | [1] | LEAD | ||
| 7. | 462-2235 | [6] | GLOW PLUG (24-VOLT) | |
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP46140169
290-0659: HARNESS AS-CAB
290-0659 HARNESS AS-CAB -MAIN
S/N BYD1-UP
PART OF 289-8904 WIRING GP-CAB
AN ATTACHMENT
S/N BYD1-UP
PART OF 289-8904 WIRING GP-CAB
AN ATTACHMENT
For full view, you need register
Parts for your 928HZ WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 110-0203 | [4] | CONNECTOR AS (18-GA, BLACK) | ||
| 142-9117 | [4] | CONNECTOR (10-PIN) | ||
| 228-5856 | [4] | CONNECTOR (10-PIN) | ||
| 5P-6271 | [1] | CONNECTOR AS | ||
| 115-1052 | [6] | PIN-CONNECTOR | ||
| 9X-3401 | [30] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [30] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2265 | [3] | KIT-CONNECTING PLUG (8-PIN) | ||
| 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 8T-8737 | [10] | PLUG-SEAL | ||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 167-3692 | [1] | RECEPTACLE AS-CONNECTOR (31-PIN) | ||
| 194-5226 | [29] | WIRE AS (16-GA) | ||
| -OR- | ||||
| 194-5227 | [29] | WIRE AS (14-GA) | ||
| 113-5183 | [2] | SOCKET-LAMP | ||
| 8L-8413 | [36] | STRAP-CABLE (WHITE) | ||
| 329-3734 B | TAPE-ELECTRICAL | |||
| 5P-4571 | [1] | TERMINAL-BLADE (14-GA TO 16-GA) | ||
| 091-2436 | [14] | TERMINAL-BLADE (18-GA TO 22-GA) | ||
| 104-1995 | [18] | TERMINAL-BLADE (14-GA TO 18-GA) | ||
| 112-9611 | [31] | TERMINAL-BLADE (18-GA TO 20-GA) | ||
| 113-5184 | [4] | TERMINAL-RECEPTACLE (16-GA TO 18-GA) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(13-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(30-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM) | |||
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
Information:
ELECTRICAL AND STARTING SYSTEM
SENSOR GP
Special Instruction
Diagnostic Process for Fuel Rail Pressure Sensor{1718}
Diagnostic Process for Fuel Rail Pressure Sensor{1718}
Diagnostic Process for Fuel Rail Pressure Sensor{1718}
Kickout Positioner Adjustment for Fusion and Standard Coupler Small Wheel Loaders{5109, 5112}
Kickout Positioner Adjustment for Fusion and Standard Coupler Small Wheel Loaders{5109, 5112}
Kickout Positioner Adjustment for Fusion and Standard Coupler Small Wheel Loaders{5109, 5112}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Specifications
Pressure Sensor (Brake System Oil)
924H, 924HZ, 928HZ and 930H Wheel Loaders Braking and Hydraulic Fan System
924H, 924HZ, 928HZ and 930H Wheel Loaders Braking and Hydraulic Fan System
Pressure Sensor (Brake Oil)
924H, 924HZ, 928HZ and 930H Wheel Loaders Braking and Hydraulic Fan System
924H, 924HZ, 928HZ and 930H Wheel Loaders Braking and Hydraulic Fan System
Speed Sensor (Torque Converter Output) (Transmission Intermediate Output)
924H, 924HZ, 928HZ and 930H Wheel Loaders Power Train
924H, 924HZ, 928HZ and 930H Wheel Loaders Power Train
Tool Operating Manual
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Systems Operation
Reuse And Salvage Guidelines
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Troubleshooting
Disassembly and Assembly
Position Sensor (Fuel Injection Pump) - Remove and Install
C6.6 Engines for Caterpillar Built Machines
C6.6 Engines for Caterpillar Built Machines
Service Magazine
