289-8957 WIRING GP-FRONT S/N BYD385-UP PART OF 289-8871 CHASSIS AR 928HZ WHEEL LOADER

ELECTRICAL AND STARTING SYSTEM

WIRING GP

0. 289-8957 WIRING GP-
1. 289-8958 WIRING GP-
2. 289-8958 WIRING GP-
3. 289-8959 WIRING GP-
4. 290-7189 WIRING GP-
5. 290-7189 WIRING GP-
6. 312-8309 WIRING GP-
7. 290-7219 WIRING GP-
8. 290-7220 WIRING GP-

POWER TRAIN

AXLE GP

9. 203-2761 AXLE AR-FI
0. INFORMATION

WHEEL LOADER 928HZ WHEEL LOADER BYD
928Hz 930H Wheel Loader BYD00001-UP (MACHINE) POWERED BY C6.6 Engine SEBP4614 928HZ BYD (2007)

ELECTRICAL AND STARTING SYSTEM

WIRING GP

289-8902 WIRING GP-ENGINE

289-8957 WIRING GP-FRONT

289-8958 WIRING GP-FRONT

289-8959 WIRING GP-REAR

#SEBP46140250

289-8957: WIRING GP-FRONT

WIRING GP-FRONT

289-8957 WIRING GP-FRONT
S/N BYD385-UP
PART OF 289-8871 CHASSIS AR

i03454380 SEBP4614

For full view, you need register

Parts for your 928HZ WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7K-1181 C	[22]	STRAP-CABLE
2.	163-1201	[1]	HORN AS (24-VOLT, LOW TONE)
3.	194-4121	[4]	SPACER (10.1X15.9X70-MM THK)
4.	194-8111	[1]	PLATE AS
5.	194-8112	[1]	PLATE AS
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
6.	194-8113	[2]	PLATE
7.	194-8114	[2]	BLOCK
8.	200-6345	[1]	SADDLE-MOUNTING (DUAL SWIVEL)
9.	204-2281 C	[3]	STRAP-CABLE
10.	211-0052 C	[3]	NUT (1-11/16-18-THD)
11.	226-2951 C	[1]	BRACKET AS
12.	226-3378 C	[1]	PLATE AS
13.	231-7994	[2]	BLOCK
14.	231-7995	[2]	BLOCK
15.	289-9175	[1]	HARNESS AS-FRONT
16.	204-8000 C	[1]	MOUNTING-CABLE TIE
17.	2H-9524	[2]	GROMMET
18.	3S-8665 C	[1]	CLIP (LOOP)
19.	4P-7581 C	[3]	CLIP (LADDER)
20.	4P-8134	[1]	CLIP (LADDER)
21.	5P-4116 C	[1]	WASHER-HARD (8.8X20.5X2-MM THK)
22.	7B-1251	[2]	GROMMET
23.	8D-9671 C	[1]	CLIP
24.	8T-4121 C	[10]	WASHER-HARD (11X21X2.5-MM THK)
25.	8T-4137 M	[4]	BOLT (M10X1.5X20-MM)
26.	8T-4195 CM	[2]	BOLT (M10X1.5X30-MM)
27.	8T-4198 M	[4]	BOLT (M10X1.5X100-MM)
28.	8T-4224 C	[1]	WASHER-HARD (8.8X16X2-MM THK)
29.	8T-4908 CM	[1]	BOLT (M8X1.25X25-MM)
30.	8T-7547 CM	[1]	BOLT (M8X1.25X30-MM)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART

#SEBP46140251

289-8958: WIRING GP-FRONT

WIRING GP-FRONT

289-8958 WIRING GP-FRONT
S/N FTD1-995
PART OF 289-8891, 290-6498 CHASSIS AR

i02807989 SEBP4614

For full view, you need register

Parts for your 928HZ WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7K-1181	[26]	STRAP-CABLE
2.	163-1201	[1]	HORN AS (24-VOLT, LOW TONE)
3.	200-6345	[1]	SADDLE-MOUNTING (DUAL SWIVEL)
4.	206-2423	[1]	SADDLE-MOUNTING
5.	245-8145	[4]	BLOCK
6.	246-2228	[1]	PLATE AS
	6V-9632 M	[2]	NUT-WELD (M6X1-THD)
7.	246-2230	[1]	BRACKET AS
	6V-9632 M	[2]	NUT-WELD (M6X1-THD)
8.	252-8958	[2]	PLATE
9.	289-9176	[1]	HARNESS AS-FRONT
10.	4P-7581	[4]	CLIP (LADDER)
11.	7X-2534 M	[4]	BOLT (M6X1X50-MM)
12.	8T-4121	[6]	WASHER-HARD (11X21X2.5-MM THK)
13.	8T-4137 M	[5]	BOLT (M10X1.5X20-MM)
14.	8T-4191 M	[1]	BOLT (M10X1.5X16-MM)
	M		METRIC PART

#SEBP46140252

289-8958: WIRING GP-FRONT

WIRING GP-FRONT

289-8958 WIRING GP-FRONT
S/N FTD996-UP
PART OF 290-6498 CHASSIS AR

i03468901 SEBP4614

For full view, you need register

Parts for your 928HZ WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7K-1181	[26]	STRAP-CABLE
2.	163-1201	[1]	HORN AS (24-VOLT, LOW TONE)
3.	200-6345 C	[2]	SADDLE-MOUNTING (DUAL SWIVEL)
4.	204-2281 C	[3]	STRAP-CABLE
5.	211-0052 C	[3]	NUT (1-11/16-18-THD)
6.	226-2951 C	[1]	BRACKET AS
7.	226-3378 C	[1]	PLATE AS
8.	245-8145	[4]	BLOCK
9.	246-2228	[1]	PLATE AS
	6V-9632 M	[2]	NUT-WELD (M6X1-THD)
10.	246-2230	[1]	BRACKET AS
	6V-9632 M	[2]	NUT-WELD (M6X1-THD)
11.	252-8958	[2]	PLATE
12.	289-9176	[1]	HARNESS AS-FRONT
13.	204-8000 C	[1]	MOUNTING-CABLE TIE
14.	3S-8665 C	[1]	CLIP (LOOP)
15.	4P-7581	[4]	CLIP (LADDER)
16.	5P-4116 C	[1]	WASHER-HARD (8.8X20.5X2-MM THK)
17.	7X-2534 M	[4]	BOLT (M6X1X50-MM)
18.	7X-7729 C	[1]	WASHER (11X25X3-MM THK)
19.	8D-9671 C	[1]	CLIP
20.	8T-4121 C	[8]	WASHER-HARD (11X21X2.5-MM THK)
21.	8T-4136 CM	[1]	BOLT (M10X1.5X25-MM)
22.	8T-4137 M	[5]	BOLT (M10X1.5X20-MM)
23.	8T-4191 M	[1]	BOLT (M10X1.5X16-MM)
24.	8T-4195 CM	[2]	BOLT (M10X1.5X30-MM)
25.	8T-4224 C	[1]	WASHER-HARD (8.8X16X2-MM THK)
26.	8T-4908 CM	[1]	BOLT (M8X1.25X25-MM)
27.	8T-7547 CM	[1]	BOLT (M8X1.25X30-MM)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART

#SEBP46140253

289-8959: WIRING GP-REAR

WIRING GP-REAR

289-8959 WIRING GP-REAR
S/N BYD1-UP; FTD1-UP
PART OF 289-8871, 289-8891, 290-6498 CHASSIS AR

i02807386 SEBP4614

For full view, you need register

Parts for your 928HZ WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7K-1181	[35]	STRAP-CABLE
2.	206-1345	[2]	STRAP-CABLE
3.	289-9169	[1]	HARNESS AS-REAR
	9W-0852	[3]	PIN-CONNECTOR (14-GA TO 16-GA)
	9X-3401	[27]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[27]	PIN-CONNECTOR (14-GA TO 16-GA)
	155-2260	[5]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[13]	KIT-CONNECTING PLUG (2-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	225-3854	[1]	PLUG AS-CONNECTOR (31-PIN)
	8T-8737	[36]	PLUG-SEAL
	102-8802	[8]	KIT-RECEPTACLE (2-PIN)
	102-8803	[2]	KIT-RECEPTACLE (3-PIN)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	100-6674	[2]	SEAL-CONNECTOR
	9W-0844	[2]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	180-9340	[32]	SOCKET-CONNECTOR (14-GA TO 18-GA)
	8L-8413	[23]	STRAP-CABLE (WHITE)
	1P-0810 E		TAPE-ELECTRICAL (29-CM)
	2L-8076	[1]	TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW)
	2L-8079	[1]	TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM)
4.	132-5789	[3]	CLIP (LADDER)
5.	1M-4543	[1]	GROMMET
6.	3S-2093	[11]	STRAP-CABLE
7.	4P-7581	[5]	CLIP (LADDER)
8.	5P-6264	[4]	GROMMET
9.	8T-4121	[7]	WASHER-HARD (11X21X2.5-MM THK)
10.	8T-4137 M	[6]	BOLT (M10X1.5X20-MM)
11.	8T-4191 M	[1]	BOLT (M10X1.5X16-MM)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP46140254

290-7189: WIRING GP-RIDE CONTROL

WIRING GP-RIDE CONTROL

290-7189 WIRING GP-RIDE CONTROL
S/N FTD1-1209
PART OF 289-8996 CONTROL AR-RIDE
AN ATTACHMENT

i02822463 SEBP4614

2907189 WIRING GP-RIDE CONTROL Parts scheme

For full view, you need register

Parts for your 928HZ WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3E-5239	[1]	RELAY AS (24-VOLT)(RIDE CONTROL, PRESSURE SWITCH)
2.	7K-1181	[6]	STRAP-CABLE
3.	189-3158	[1]	SUPPRESSOR-ARC
4.	158-5089	[1]	RELAY AS (24-VOLT)(RIDE CONTROL)
5.	171-6029	[1]	HARNESS AS-RIDE CONTROL (SOLENOID VALVE)
	9X-3401	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	9X-1054	[1]	PLUG AS-CONNECTOR (4-PIN)
	155-2270	[2]	KIT-CONNECTING PLUG (2-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACL AS & WEDGE)
	9X-3402	[4]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	9X-1056	[4]	TERMINAL-RECEPTACLE (14-GA TO 16-GA)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)
6.	292-5606	[1]	SWITCH AS-ROCKER (24-VOLT)(RIDE CONTROL)
	111-7899	[1]	GASKET
7.	217-6729	[1]	HARNESS AS-RIDE CONTROL (PRESSURE SWITCH)
	9X-3401	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	180-9340	[2]	SOCKET-CONNECTOR (14-GA TO 18-GA)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACL AS & WEDGE)
8.	4P-7581	[1]	CLIP (LADDER)
9.	4P-8134	[1]	CLIP (LADDER)
10.	8T-4171 M	[1]	BOLT (M6X1X12-MM)
11.	9X-6165	[1]	WASHER (6.5X22X2.5-MM THK)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP46140255

290-7189: WIRING GP-RIDE CONTROL

WIRING GP-RIDE CONTROL

290-7189 WIRING GP-RIDE CONTROL
S/N FTD1210-UP
PART OF 289-8996 CONTROL AR-RIDE
AN ATTACHMENT

i03665580 SEBP4614

For full view, you need register

Parts for your 928HZ WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3E-5239	[1]	RELAY AS (24-VOLT)(RIDE CONTROL, PRESSURE SWITCH)
2.	7K-1181	[6]	STRAP-CABLE
3.	189-3158	[1]	SUPPRESSOR-ARC
4.	158-5089	[1]	RELAY AS (24-VOLT)(RIDE CONTROL)
5.	171-6029	[1]	HARNESS AS-RIDE CONTROL (SOLENOID VALVE)
	9X-3401	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[3]	PIN-CONNECTOR (14-GA TO 16-GA)
	155-2270	[2]	KIT-CONNECTING PLUG (2-PIN)
			(EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	9X-1054	[1]	PLUG AS-CONNECTOR (4-PIN)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)
	9X-3402	[4]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	9X-1056	[4]	TERMINAL-RECEPTACLE (14-GA TO 16-GA)
6.	292-5606	[1]	SWITCH AS-ROCKER (24-VOLT)(RIDE CONTROL)
	111-7899	[1]	GASKET
7.	217-6729	[1]	HARNESS AS-RIDE CONTROL (PRESSURE SWITCH)
	9X-3401	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	180-9340	[2]	SOCKET-CONNECTOR (14-GA TO 18-GA)
8.	4P-7581	[1]	CLIP (LADDER)
9.	9X-6165	[1]	WASHER (6.5X22X2.5-MM THK)
10.	8T-4171 M	[1]	BOLT (M6X1X12-MM)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP46140256

312-8309: WIRING GP-RIDE CONTROL

WIRING GP-RIDE CONTROL

312-8309 WIRING GP-RIDE CONTROL
S/N BYD1-UP
PART OF 290-6481 CONTROL AR-RIDE
AN ATTACHMENT

i02831614 SEBP4614

3128309 WIRING GP-RIDE CONTROL Parts scheme

For full view, you need register

Parts for your 928HZ WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	125-8232	[1]	HARNESS AS-RIDE CONTROL
	9X-3401	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	155-2270	[2]	KIT-CONNECTING PLUG (2-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS & WEDGE)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	9X-3402	[4]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM)
2.	158-5089	[1]	RELAY AS (24-VOLT)(RIDE CONTROL)
3.	189-3158	[1]	SUPPRESSOR-ARC
4.	292-5606	[1]	SWITCH AS-ROCKER (24-VOLT)(RIDE CONTROL)
	111-7899	[1]	GASKET
5.	7K-1181	[2]	STRAP-CABLE
6.	4P-7581	[1]	CLIP (LADDER)
	E		ORDER BY THE CENTIMETER

#SEBP46140257

290-7219: WIRING GP-SECONDARY STEERING

WIRING GP-SECONDARY STEERING

290-7219 WIRING GP-SECONDARY STEERING
S/N BYD1-UP
PART OF 289-8968 STEERING AR-SECONDARY
AN ATTACHMENT

i02811805 SEBP4614

2907219 WIRING GP-SECONDARY STEERING Parts scheme

For full view, you need register

Parts for your 928HZ WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7K-1181	[6]	STRAP-CABLE
2.	313-5495	[1]	CABLE AS
	5P-0746 E		CABLE (0-GA, BLACK)(35-CM)
	170-3793	[2]	RING-TERMINAL
3.	118-5597	[1]	DIODE AS
4.	158-5089	[1]	RELAY AS (24-VOLT)(SECONDARY STEERING)
5.	179-0006 Y	[1]	SWITCH GP-MAGNETIC (24-VOLT TO 32-VOLT)(SECONDARY STEERING RELAY)
6.	180-8860	[1]	HARNESS AS-STEERING (SECONDARY)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(KIT INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	9W-0852	[1]	PIN-CONNECTOR (14-GA TO 16-GA)
	2L-8076	[1]	TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW)
	2L-8079	[1]	TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)
7.	185-2768	[1]	SWITCH AS-ROCKER (SECONDARY STEERING)
	111-7899	[1]	GASKET
8.	314-9832	[1]	CABLE AS
	5P-0760 E		CABLE (0-GA, RED)(30-CM)
	8T-8827	[2]	BOOT (RED)
	170-3793	[2]	RING-TERMINAL
9.	4P-8134	[1]	CLIP (LADDER)
10.	8T-4121	[2]	WASHER-HARD (11X21X2.5-MM THK)
11.	8T-4133 M	[1]	NUT (M10X1.5-THD)
12.	8T-4136 M	[1]	BOLT (M10X1.5X25-MM)
13.	8T-4171 M	[4]	BOLT (M6X1X12-MM)
14.	8T-4205	[4]	WASHER-HARD (7.2X14.5X2-MM THK)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP46140258

290-7220: WIRING GP-SECONDARY STEERING

WIRING GP-SECONDARY STEERING

290-7220 WIRING GP-SECONDARY STEERING
S/N FTD1-UP
PART OF 289-8799, 289-8969, 289-8970 STEERING AR-SECONDARY
AN ATTACHMENT

i02808855 SEBP4614

2907220 WIRING GP-SECONDARY STEERING Parts scheme

For full view, you need register

Parts for your 928HZ WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7K-1181	[8]	STRAP-CABLE
2.	118-5597	[1]	DIODE AS
3.	158-5089	[1]	RELAY AS (24-VOLT)(ALARM)
4.	179-0006 Y	[1]	SWITCH GP-MAGNETIC (24-VOLT TO 32-VOLT)(SECONDARY STEERING RELAY)
5.	180-8860	[1]	HARNESS AS-STEERING (SECONDARY)
	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	9W-0852	[1]	PIN-CONNECTOR (14-GA TO 16-GA)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	2L-8076	[2]	TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW)
	2L-8079	[1]	TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)
6.	185-2768	[1]	SWITCH AS-ROCKER (SECONDARY STEERING)
	111-7899	[1]	GASKET
7.	251-9968	[1]	HARNESS AS-STEERING (PRIMARY PRESSURE SWITCH)
	9X-3401	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	180-9340	[3]	SOCKET-CONNECTOR (14-GA TO 18-GA)
8.	314-9832	[1]	CABLE AS
	5P-0760 E		CABLE (0-GA, RED)(30-CM)
	8T-8827	[2]	BOOT (RED)
	170-3793	[2]	RING-TERMINAL
9.	313-5495	[1]	CABLE AS
	5P-0746 E	[1]	CABLE (0-GA, BLACK)
	170-3793	[1]	RING-TERMINAL
10.	4P-8134	[1]	CLIP (LADDER)
11.	8T-4121	[2]	WASHER-HARD (11X21X2.5-MM THK)
12.	8T-4133 M	[1]	NUT (M10X1.5-THD)
13.	8T-4136 M	[1]	BOLT (M10X1.5X25-MM)
14.	8T-4171 M	[4]	BOLT (M6X1X12-MM)
15.	8T-4205	[4]	WASHER-HARD (7.2X14.5X2-MM THK)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP46140259

203-2761: AXLE AR-FIXED

AXLE AR-FIXED

203-2761 AXLE AR-FIXED -SINGLE DISC BRAKE-FRONT, STANDARD DIFFERENTIAL
S/N BYD1-UP
PART OF 289-8975 AXLE AR-FIXED
AN ATTACHMENT

i01739952 SEBP4614

For full view, you need register

Parts for your 928HZ WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
163-5775 Y	[2]	BRAKE & PLANETARY GP (SINGLE DISC)
151-6142 Y	[1]	DIFFERENTIAL GP (STANDARD)
203-2762 Y	[1]	GEAR GP-BEVEL & PINION (FRONT)
203-2763 Y	[1]	HOUSING GP-FIXED AXLE (FRONT)

220-7925	[1]	PLATE GP-AXLE IDENTIFICATION
Y		SEPARATE ILLUSTRATION

Information:

ELECTRICAL AND STARTING SYSTEM

WIRING GP

Engine News

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13

Operation and Maintenance Manual

Battery Disconnect Switch
924H, 924HZ, 928HZ and 930H Wheel Loaders

Fuses - Replace
924H, 924HZ, 928HZ and 930H Wheel Loaders

Programmable Transmission Neutralizer
924H, 924HZ, 928HZ and 930H Wheel Loaders

Alert Indicators
924H, 924HZ, 928HZ and 930H Wheel Loaders

Battery or Battery Cable - Inspect/Replace
924H, 924HZ, 928HZ and 930H Wheel Loaders

Special Instruction

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Installation of the 315-6304 Coupler Lines Gp and 315-6305 Third Valve Rework Kit {1408, 5057, 5264, 5479, 6129}
Installation of the 315-6304 Coupler Lines Gp and 315-6305 Third Valve Rework Kit {1408, 5057, 5264, 5479, 6129}

Installation of the 315-6301 Coupler Lines Gp {1408, 5057, 5264, 5479, 6129, 7332}
Installation of the 315-6301 Coupler Lines Gp {1408, 5057, 5264, 5479, 6129, 7332}

Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}

Installation of CAESultra for Landfill Compactors, Motor Graders, Wheel Dozers, and Wheel Loaders{1408, 7009, 7010, 7338, 733T, 7490, 7604}
Installation of CAESultra for Landfill Compactors, Motor Graders, Wheel Dozers, and Wheel Loaders{1408, 7009, 7010, 7338, 733T, 7490, 7604}

Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}

Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}

Installation Procedure for the 192-7805 Seat Compressor Harness{1408, 7312, 7324}
Installation Procedure for the 192-7805 Seat Compressor Harness{1408, 7312, 7324}

DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}

Specifications

Magnetic Switch (Secondary Steering Relay)
928H and 928HZ Wheel Loader Steering System

Temperature Sensor (Hydraulic Oil)
924H, 924HZ, 928HZ and 930H Wheel Loaders Hydraulic System

Pressure Switch (Primary Steering Oil)
928H and 928HZ Wheel Loader Steering System

Temperature Sensor (Hydraulic Oil)
924H, 924HZ, 928HZ and 930H Wheel Loaders Hydraulic System

Limit Switch (Parking Brake)
924H, 924HZ, 928HZ and 930H Wheel Loaders Braking and Hydraulic Fan System

Fuel Level Sender
924H, 924HZ, 928HZ and 930H Wheel Loaders Machine Systems

Limit Switch (Brake Pedal)
924H, 924HZ, 928HZ and 930H Wheel Loaders Braking and Hydraulic Fan System

Tool Operating Manual

Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Systems Operation

Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Caterpillar Machines

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Testing and Adjusting

Electric Starting System - Test
C6.6 Engines for Caterpillar Built Machines

Electrical Connector - Inspect
Product Link - PL522/523

Wiring Harness (Open Circuit) - Test
Product Link - PL522/523

Wiring Harness (Short Circuit) - Test
Product Link - PL522/523

Electrical Connector - Inspect
Product Link 121S/300

Wiring Harness (Open Circuit) - Test
Product Link 121S/300

Wiring Harness (Short Circuit) - Test
Product Link 121S/300

System Schematic
Machine Security System (MSS3i) Integrated

Troubleshooting

Wiring Harness (Short Circuit) - Test
924H, 924HZ, 928HZ and 930H Wheel Loaders

Wiring Harness (Open Circuit) - Test
924H, 924HZ, 928HZ and 930H Wheel Loaders

Electrical Connector - Inspect
924H, 924HZ, 928HZ and 930H Wheel Loaders

Electrical Connectors - Inspect
C6.6 Engines For Caterpillar Built Machines

ECM Harness Connector Terminals
C6.6 Engines For Caterpillar Built Machines

CID 0168 FMI 00
C6.6 Engines For Caterpillar Built Machines

CID 0168 FMI 01
C6.6 Engines For Caterpillar Built Machines

CID 0172 FMI 03
C6.6 Engines For Caterpillar Built Machines

CID 0172 FMI 04
C6.6 Engines For Caterpillar Built Machines

CID 0168 FMI 02
C6.6 Engines For Caterpillar Built Machines

CID 1785 FMI 03
C6.6 Engines For Caterpillar Built Machines

CID 1785 FMI 04
C6.6 Engines For Caterpillar Built Machines

CID 1785 FMI 10
C6.6 Engines For Caterpillar Built Machines

CID 1834 FMI 02
C6.6 Engines For Caterpillar Built Machines

MID 081 - CID 0247 - FMI 09
924H, 924HZ, 928HZ and 930H Wheel Loaders

Connector Locations
924H, 924HZ, 928HZ and 930H Wheel Loaders

CID 2246 FMI 06
C6.6 Engines For Caterpillar Built Machines

CID 2246 FMI 05
C6.6 Engines For Caterpillar Built Machines

Sensors and Electrical Connectors
C6.6 Engines For Caterpillar Built Machines

Engine Wiring Information
C6.6 Engines For Caterpillar Built Machines

Ignition Keyswitch Circuit and Battery Supply Circuit - Test
C6.6 Engines For Caterpillar Built Machines

Starting Aid (Glow Plug) Relay Circuit - Test
C6.6 Engines For Caterpillar Built Machines

MID 122 - CID 0269 - FMI 03
Product Link 121S/300

MID 122 - CID 0269 - FMI 04
Product Link 121S/300

Service Magazine

Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04

Proper Jump Starting Procedure for Wheel Loaders {1000, 1403, 1408, 7000}
2009/01/26

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2012/03/05

New Torque Specification for Position Sensor on 3054E, C6.6, and C4.4 Machine Engines {1408, 1907}
2012/02/16

Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08

Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08

Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21

An Improved Routing Process is Now Available When Replacing 192-7805 Harness As in TLV1 Seat Suspensions on Certain Machines {1408, 7312, 7324}
2013/12/09

Parts are Now Available to Make Jump Start Receptacle on Cat<SUP>®</SUP> Product {1463}
2014/03/04

Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}

Caterpillar Parts SIS Catalog 928HZ :

289-8957 WIRING GP-FRONT

289-8902 WIRING GP-ENGINE

299-3953 WIRING GP-ELECTRONIC CONTROL

256-7269 WIRING GP-CAMERA

289-8904 WIRING GP-CAB

289-8958 WIRING GP-FRONT

289-8959 WIRING GP-REAR

290-7189 WIRING GP-RIDE CONTROL

312-8309 WIRING GP-RIDE CONTROL

290-7219 WIRING GP-SECONDARY STEERING

290-7220 WIRING GP-SECONDARY STEERING

Truck sale:

Caterpillar 928HZ
- Wheel Loaders
CGT - COMPAGNIA GENERALE TRATTORI

Caterpillar 928HZ
- Wheel Loaders
SIME DARBY INDUSTRIAL SDN BHD

Caterpillar 928HZ
- Wheel Loaders
MICHIGAN CAT

59,000

Caterpillar 928HZ, Wheel Loaders, Construction
- Wheel Loaders
RING POWER CORP.

95,697

Caterpillar 928HZ, Wheel Loaders, Construction
- Wheel Loaders
BERGERAT MONNOYEUR S.A.S.