AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

206-1702 CONSOLE GP-OPERATOR -LH S/N DXC1-UP PART OF 310-4341, 310-4343 CAB AR-ENCLOSED ROPS, 310-4338 CANOPY AR-OPEN ROPS AN ATTACHMENT 428E


OPERATOR STATION
CONSOLE GP
CONTROL GP
CONTROL GP-HYDRAULIC

BACKHOE LOADER 428E BACKHOE LOADER DXC
 428E Backhoe Loader DXC00001-UP (MACHINE) POWERED BY C4.4 (MECH) Engine SEBP4623 428E DXC   (2008)

OPERATOR STATION

CONSOLE GP
WIRING GP-CONSOLE
310-2351 WIRING GP-CONSOLE
CONSOLE GP-OPERATOR
206-1700 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
206-1702 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
317-5539 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
317-5539 CONSOLE GP-OPERATOR
TRIM GP-CAB
206-1704 TRIM GP-CAB
PROTECTION GP-VANDALISM
206-1701 PROTECTION GP-VANDALISM
 

#SEBP46230760
 

206-1702: CONSOLE GP-OPERATOR

206-1702 CONSOLE GP-OPERATOR -LH
S/N DXC1-UP
PART OF 310-4341, 310-4343 CAB AR-ENCLOSED ROPS, 310-4338 CANOPY AR-OPEN ROPS
AN ATTACHMENT
i02158476 SEBP4623
2061702 CONSOLE GP-OPERATOR Parts scheme
  For full view, you need register

Parts for your 428E BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-6600 E SEAL (34-CM)  
2. 5P-5927 D SEAL (1.7-M)  
3. 206-1696 [1] CONSOLE AS (LH)  
4. 206-1698 [1] DOOR-STORAGE  
5. 206-1699 [1] CUP HOLDER  
6. 206-1706 [1] BOX AS-STORAGE  
7. 206-1708 J [1] LOCK AS  
8. 206-1712 [1] HINGE-DOOR  
9. 210-6491 [1] CUP HOLDER  
10. 249-2482 [1] PLATE  
11. 261-9636 [1] BRACKET-SUPPORT  
12. 261-9637 [2] BRACKET AS  
13. 261-9639 [3] SCREW-PAN HEAD (12.0X0.5-IN)  
14. 293-1980 E SEAL (71-CM)  
14A. 293-1980 E SEAL (77-CM)  
15. 5C-2890 M [3] NUT (M6X1-THD)  
16. 8T-4205 [3] WASHER-HARD (7.2X14.5X2-MM THK)  
17. 9X-2038 [6] WASHER (7X19X2-MM THK)  
18. 9X-2044 M [19] SCREW-TRUSS HEAD (M6X1X16-MM)  
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  J   REQUIRES CORPORATE KEY
  M   METRIC PART
 

#SEBP46230761
 

317-5539: CONSOLE GP-OPERATOR

317-5539 CONSOLE GP-OPERATOR -FRONT
S/N DXC1-UP
PART OF 310-4341, 310-4343 CAB AR-ENCLOSED ROPS, 310-4338 CANOPY AR-OPEN ROPS
Type 1
AN ATTACHMENT
i03019279 SEBP4623
3175539 CONSOLE GP-OPERATOR Parts scheme
  For full view, you need register

Parts for your 428E BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4I-3038 [2] WASHER (3.3X8X0.5-MM THK)  
2. 184-5293 B [1] PLUG  
3. 206-1659 [1] DOOR-STORAGE  
4. 206-1662 [1] CONSOLE AS-FRONT (UPPER)  
  206-1667 [8] CLIP (TRIM)  
5. 206-1663 [1] CONSOLE-FRONT (MIDDLE)  
6. 206-1708 J [1] LOCK AS  
7. 224-2147 [1] CONSOLE AS-FRONT (LOWER, LH)  
8. 224-2149 [1] CONSOLE AS-FRONT (LOWER, RH)  
9. 233-5260 [2] LANYARD  
10. 258-2354 [1] BRACKET-LATCH  
11. 261-9639 [10] SCREW-PAN HEAD (12.0X0.5-IN)  
12. 313-6711 [1] COVER AS-STEERING COLUMN (UPPER)  
  206-1667 [2] CLIP (TRIM)  
13. 313-6712 [1] COVER AS-STEERING COLUMN (FRONT)  
14. 313-6713 [1] COVER AS-STEERING COLUMN (REAR)  
    (EACH COVER AS-STEERING COLUMN INCLUDES)
  206-1667 [4] CLIP (TRIM)  
15. 320-9835 [1] FILM-INSTRUCTION (FORWARD, NEUTRAL, REVERSE)  
16. 120-9027 M [2] SCREW-PAN HEAD (M3X0.5X16-MM)  
17. 206-1854 [1] HINGE  
18. 8T-2658 M [2] LOCKNUT (M3X0.5-THD)  
19. 9X-2038 [3] WASHER (7X19X2-MM THK)  
20. 9X-2044 M [2] SCREW-TRUSS HEAD (M6X1X16-MM)  
21. 9X-2045 M [16] SCREW-TRUSS HEAD (M6X1X20-MM)  
22. 220-0738 E SEAL (22-CM)  
23. 5P-7070 D INSULATION-STRIP (0.1-M EACH)  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  J   REQUIRES CORPORATE KEY
  M   METRIC PART
 

#SEBP46230762
 

317-5539: CONSOLE GP-OPERATOR

317-5539 CONSOLE GP-OPERATOR -FRONT
S/N DXC1-UP
PART OF 310-4341, 310-4343 CAB AR-ENCLOSED ROPS, 310-4338 CANOPY AR-OPEN ROPS
Type 2
AN ATTACHMENT
i04556060 SEBP4623
3175539 CONSOLE GP-OPERATOR Parts scheme
  For full view, you need register

Parts for your 428E BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4I-3038 [2] WASHER (3.3X8X0.5-MM THK)  
2. 206-1659 [1] DOOR-STORAGE  
3. 206-1662 [1] CONSOLE AS-FRONT (UPPER)  
  206-1667 [8] CLIP (TRIM)  
4. 206-1663 [1] CONSOLE-FRONT (MIDDLE)  
5. 206-1708 J [1] LOCK AS  
6. 224-2147 [1] CONSOLE AS-FRONT (LOWER, LH)  
7. 224-2149 [1] CONSOLE AS-FRONT (LOWER, RH)  
8. 227-1057 BC [1] PLUG  
9. 233-5260 [2] LANYARD  
10. 258-2354 [1] BRACKET-LATCH  
11. 261-9639 [10] SCREW-PAN HEAD (12.0X0.5-IN)  
12. 313-6711 [1] COVER AS-STEERING COLUMN (UPPER)  
  206-1667 [2] CLIP (TRIM)  
13. 313-6712 [1] COVER AS-STEERING COLUMN (FRONT)  
14. 313-6713 [1] COVER AS-STEERING COLUMN (REAR)  
    (EACH COVER AS INCLUDES)
  206-1667 [4] CLIP (TRIM)  
15. 320-9835 [1] FILM-INSTRUCTION (FORWARD, NEUTRAL, REVERSE)  
16. 120-9027 M [2] SCREW-PAN HEAD (M3X0.5X16-MM)  
17. 206-1854 [1] HINGE  
18. 8T-2658 M [2] LOCKNUT (M3X0.5-THD)  
19. 9X-2038 [3] WASHER (7X19X2-MM THK)  
20. 9X-2044 M [2] SCREW-TRUSS HEAD (M6X1X16-MM)  
21. 9X-2045 M [16] SCREW-TRUSS HEAD (M6X1X20-MM)  
22. 5P-7070 D INSULATION-STRIP (0.1-M EACH)  
23. 220-0738 E SEAL (22-CM)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  J   REQUIRES CORPORATE KEY
  M   METRIC PART
 

#SEBP46230763
 

221-3004: CONTROL & MTG GP-STABILIZER

221-3004 CONTROL & MTG GP-STABILIZER -WITH ALARM
S/N DXC1-UP
PART OF 253-8987 CONTROL GP-STABILIZER
AN ATTACHMENT
i02158592 SEBP4623
2213004 CONTROL & MTG GP-STABILIZER Parts scheme
  For full view, you need register

Parts for your 428E BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
2. 9R-8165 [1] BEARING  
3. 183-6084 [1] BEARING  
4. 206-1874 [1] LEVER AS  
5. 221-3005 Y [2] CONTROL GP-HYDRAULIC HAND  
6. 229-5280 [1] PLATE AS  
7. 229-5745 [1] SPACER (8X15.875X11.6-MM THK)  
8. 232-1542 [1] SEAL  
9. 248-2708 [1] GROMMET  
10. 248-2710 [1] GROMMET  
11. 164-1395 [1] KNOB  
12. 5P-4116 [6] WASHER-HARD (8.8X20.5X2-MM THK)  
13. 6E-5431 B [1] SHIM (0.5-MM THK)  
14. 7X-0465 M [3] BOLT (M6X1X100-MM)  
15. 8T-4189 M [4] BOLT (M8X1.25X20-MM)  
16. 8T-7547 M [1] BOLT (M8X1.25X30-MM)  
17. 9X-8256 [4] WASHER (6.6X12X2-MM THK)  
18. 8T-6902 [1] CLIP  
19. 8T-4138 M [1] BOLT (M6X1X20-MM)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP46230764
 

209-3372: CONTROL GP-HYDRAULIC HAND

209-3372 CONTROL GP-HYDRAULIC HAND -4-FUNCTION, STANDARD
S/N DXC1-UP
AN ATTACHMENT
i02155029 SEBP4623
2093372 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your 428E BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 164-1361 [2] BOOT  
2. 164-1371 [2] PLATE  
3. 164-1399 [2] KNOB  
4. 164-1406 [2] ROD  
5. 164-1441 [2] ROD  
6. 164-1451 [1] BRACKET AS  
7. 164-1452 [1] BRACKET AS  
8. 190-5134 [2] FILM-IDENTIFICATION (STD CROSS PATTERN)  
9. 206-1672 [1] CONSOLE  
10. 206-1673 [1] CONSOLE AS  
  172-8591 M [2] NUT-CLIP (M6X1-THD)  
11. 231-2866 [1] LEVER AS (RH)  
12. 231-2867 [1] LEVER AS (LH)  
13. [1] GASKET  
14. 248-2719 [1] TOWER AS  
15. [1] FILM-WARNING (CONTROL PATTERN, READ OMM)  
16. 179-8235 [4] LOCK PIN  
17. 6V-7744 M [4] LOCKNUT (M10X1.5-THD)  
18. 8C-4987 [4] PIN-CLEVIS  
19. 8T-4121 [7] WASHER-HARD (11X21X2.5-MM THK)  
20. 8T-4195 M [3] BOLT (M10X1.5X30-MM)  
21. 8T-4224 [8] WASHER-HARD (8.8X16X2-MM THK)  
22. 8T-4773 [4] BALL JOINT  
23. 8T-4815 [4] ROD END  
24. 8T-7547 M [8] BOLT (M8X1.25X30-MM)  
25. 9R-9901 [6] FASTENER (CLIP)  
26. 9X-2038 [4] WASHER (7X19X2-MM THK)  
27. 9X-2045 M [4] SCREW-TRUSS HEAD (M6X1X20-MM)  
28. 8T-4133 M [8] NUT (M10X1.5-THD)  
29. 9G-3732 B [4] SHIM (0.8-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP46230765
 

221-3005: CONTROL GP-HYDRAULIC HAND

221-3005 CONTROL GP-HYDRAULIC HAND -STABILIZER
S/N DXC1-UP
PART OF 221-3004 CONTROL & MTG GP-STABILIZER
AN ATTACHMENT
i02398223 SEBP4623
2213005 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your 428E BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 228-4592 [1] KNOB  
2. 228-4593 [1] BOOT-PROTECTION  
3. 228-4595 [1] SWITCH AS (STABILIZER UP ALARM)  
4. 228-4597 [1] CLIP  
5. 232-3072 [1] CABLE AS  
 

#SEBP46230766
 

231-2870: CONTROL GP-HYDRAULIC HAND

231-2870 CONTROL GP-HYDRAULIC HAND -STANDARD
S/N DXC1-UP
AN ATTACHMENT
i02210095 SEBP4623
2312870 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your 428E BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 164-1361 [2] BOOT  
2. 164-1371 [2] PLATE  
3. 164-1399 [2] KNOB  
4. 164-1406 [4] ROD  
5. 164-1435 [2] PLATE  
6. 170-6312 [4] BEARING  
7. 190-5130 [1] FILM-INSTRUCTION (BACKHOE)  
8. 206-1672 [1] CONSOLE  
9. 206-1673 [1] CONSOLE AS  
  172-8591 M [2] NUT-CLIP (M6X1-THD)  
10. 209-3368 [1] GASKET  
11. 231-2872 [1] LEVER AS (RH)  
12. 231-2873 [1] LEVER AS (LH)  
13. 248-2715 [1] TOWER AS  
14. 164-1402 [2] SLEEVE  
15. 164-1404 [2] SPACER (10.67X16.95X23-MM THK)  
16. 179-8235 [4] LOCK PIN  
17. 6V-7744 M [8] LOCKNUT (M10X1.5-THD)  
18. 7X-7729 [8] WASHER (11X25X3-MM THK)  
19. 8C-4987 [4] PIN-CLEVIS  
20. 8T-4121 [9] WASHER-HARD (11X21X2.5-MM THK)  
21. 8T-4133 M [8] NUT (M10X1.5-THD)  
22. 8T-4138 M [6] BOLT (M6X1X20-MM)  
23. 8T-4172 M [2] BOLT (M10X1.5X80-MM)  
24. 8T-4195 M [3] BOLT (M10X1.5X30-MM)  
25. 8T-4773 [4] BALL JOINT  
26. 8T-4815 [4] ROD END  
27. 8T-6466 M [2] BOLT (M10X1.5X60-MM)  
28. 9R-9901 [6] FASTENER (CLIP)  
29. 9X-2038 [4] WASHER (7X19X2-MM THK)  
30. 9X-2045 M [6] SCREW-TRUSS HEAD (M6X1X20-MM)  
31. 9X-8256 [6] WASHER (6.6X12X2-MM THK)  
  M   METRIC PART
 

#SEBP46230767
 

231-2871: CONTROL GP-HYDRAULIC HAND

231-2871 CONTROL GP-HYDRAULIC HAND -EXCAVATOR PATTERN
S/N DXC1-UP
AN ATTACHMENT
i02210107 SEBP4623
2312871 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your 428E BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 142-7405 [2] COLLAR  
2. 164-1361 [2] BOOT  
3. 164-1371 [2] PLATE  
4. 164-1399 [2] KNOB  
5. 164-1421 [1] PLATE  
6. 164-1422 [1] SHAFT AS  
7. 164-1425 [1] COUPLER AS  
8. 164-1427 [2] ROD  
9. 164-1429 [1] COUPLER AS  
10. 164-1435 [2] PLATE  
11. 164-1438 [2] ROD  
12. 164-1441 [2] ROD  
13. 170-6312 [4] BEARING  
14. 190-5128 [1] FILM-INSTRUCTION (EXCAVATOR CONTROL)  
15. 206-1672 [1] CONSOLE  
16. 206-1673 [1] CONSOLE AS  
  172-8591 M [2] NUT-CLIP (M6X1-THD)  
17. 231-2872 [1] LEVER AS (RH)  
18. 231-2873 [1] LEVER AS (LH)  
19. 248-2715 [1] TOWER AS  
20. 257-4293 [1] GASKET  
21. 164-1402 [2] SLEEVE  
22. 164-1404 [2] SPACER (10.67X16.95X23-MM THK)  
23. 6V-7744 M [14] LOCKNUT (M10X1.5-THD)  
24. 6V-8932 M [2] SETSCREW-SOCKET (M6X1X10-MM)  
25. 7X-7729 [8] WASHER (11X25X3-MM THK)  
26. 8T-4121 [20] WASHER-HARD (11X21X2.5-MM THK)  
27. 8T-4133 M [16] NUT (M10X1.5-THD)  
28. 8T-4138 M [6] BOLT (M6X1X20-MM)  
29. 8T-4172 M [2] BOLT (M10X1.5X80-MM)  
30. 8T-4195 M [6] BOLT (M10X1.5X30-MM)  
31. 8T-4773 [10] BALL JOINT  
32. 8T-4815 [2] ROD END  
33. 8T-6466 M [2] BOLT (M10X1.5X60-MM)  
34. 9R-2806 [2] PIN  
35. 9R-2807 [2] CLIP  
36. 9R-9901 [6] FASTENER (CLIP)  
37. 9X-2038 [4] WASHER (7X19X2-MM THK)  
38. 9X-2045 M [6] SCREW-TRUSS HEAD (M6X1X20-MM)  
39. 9X-8256 [6] WASHER (6.6X12X2-MM THK)  
  M   METRIC PART
 

#SEBP46230768
 

267-4505: CONTROL GP-HYDRAULIC HAND

267-4505 CONTROL GP-HYDRAULIC HAND -PARALLEL LIFT
S/N DXC1-UP
PART OF 249-6580, 326-4615 VALVE AR-BANK 3
AN ATTACHMENT
i02420060 SEBP4623
2674505 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your 428E BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1K-0502 [10] WASHER (16.3X25.4X1.2-MM THK)  
2. 2R-0364 [4] RING-RETAINING  
3. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
4. 5H-3193 [1] PIN-SPRING  
5. 8T-4773 [3] BALL JOINT  
6. 9R-1765 [1] COVER-TOP  
7. 9R-1766 [1] COVER-BOTTOM  
8. 9R-1767 [1] BOOT  
9. 9R-9868 [1] SWITCH GP-PUSH BUTTON (NEUTRALIZER, DOWNSHIFT)  
  5P-5677 D WIRE (18-GA, BLACK)(1-M EACH)  
  6V-2689 D TUBE-HEAT SHRINK (6.35-MM DIA)(1.1-M)  
  180-9339 [2] PIN-CONNECTOR (14-GA TO 18-GA)  
  9W-0625 [1] SWITCH AS-PUSH BUTTON  
10. 107-5591 [1] NUT-JAM (3/4-16-THD)  
11. 164-1368 [12] FASTENER  
12. 183-3135 [1] JOINT AS  
13. 183-3137 [1] PIN  
14. 206-1668 [1] BOOT  
15. 291-5108 [1] GASKET  
16. 220-0269 [1] SHAFT  
17. 230-2510 [1] LEVER AS  
18. 230-3038 [1] LEVER AS  
  183-3136 [1] BUSHING  
19. 267-4608 [1] ROD  
20. 267-4609 [1] ROD  
21. 267-4610 [1] ROD  
22. 269-8129 [1] BRACKET AS  
24. 270-2795 [1] PLATE  
25. 275-8869 [1] BRACKET AS  
26. 164-1395 [1] KNOB  
27. 179-8235 [2] LOCK PIN  
28. 9X-2040 M [2] SCREW-TRUSS HEAD (M10X1.5X25-MM)  
29. 6V-7744 M [4] LOCKNUT (M10X1.5-THD)  
30. 7X-7729 [4] WASHER (11X25X3-MM THK)  
31. 8C-4987 [2] PIN-CLEVIS  
32. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
33. 8T-4133 M [6] NUT (M10X1.5-THD)  
34. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
36. 8T-4189 M [4] BOLT (M8X1.25X20-MM)  
37. 5P-4116 [4] WASHER-HARD (8.8X20.5X2-MM THK)  
38. 8T-4815 [3] ROD END  
39. 8T-9501 [2] SCREW (10-16X0.75-IN)  
40. 9R-2807 [1] CLIP  
41. 9R-3067 [1] PIN  
42. 3E-6600 E SEAL (7-CM)  
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP46230769
 

274-3791: CONTROL GP-HYDRAULIC HAND

274-3791 CONTROL GP-HYDRAULIC HAND -PARALLEL LIFT
S/N DXC1-UP
PART OF 249-6578 VALVE AR-BANK 2
AN ATTACHMENT
i02419780 SEBP4623
2743791 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your 428E BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1K-0502 B [7] WASHER (16.3X25.4X1.2-MM THK)  
2. 2R-0364 [3] RING-RETAINING  
3. 9X-2040 M [2] SCREW-TRUSS HEAD (M10X1.5X25-MM)  
4. 5H-3193 [1] PIN-SPRING  
5. 8T-4773 [2] BALL JOINT  
6. 9R-1765 [1] COVER-TOP  
7. 9R-1766 [1] COVER-BOTTOM  
8. 9R-1767 [1] BOOT  
9. 9R-9868 [1] SWITCH GP-PUSH BUTTON (NEUTRALIZER, DOWNSHIFT)  
  180-9339 [2] PIN-CONNECTOR (14-GA TO 18-GA)  
  6V-2689 D TUBE-HEAT SHRINK (6.35-MM DIA)(1.1-M)  
  5P-5677 B WIRE (18-GA, BLACK)  
  9W-0625 [1] SWITCH AS-PUSH BUTTON (PUSH BUTTON)  
10. 107-5591 [1] NUT-JAM (3/4-16-THD)  
11. 164-1368 [12] FASTENER  
12. 183-3135 [1] JOINT AS  
13. 183-3137 [1] PIN  
14. 206-1695 [1] BOOT  
15. 291-5108 [1] GASKET  
16. 220-0269 [1] SHAFT  
17. 230-2510 [1] LEVER AS  
18. 267-4608 [1] ROD  
19. 267-4610 [1] ROD  
20. 269-8129 [1] BRACKET AS  
22. 270-2795 [1] PLATE  
23. 275-8869 [1] BRACKET AS  
24. 179-8235 [1] LOCK PIN  
25. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
26. 6V-7744 M [4] LOCKNUT (M10X1.5-THD)  
27. 7X-7729 [4] WASHER (11X25X3-MM THK)  
28. 8C-4987 [1] PIN-CLEVIS  
29. 8T-4121 [3] WASHER-HARD (11X21X2.5-MM THK)  
30. 8T-4133 M [4] NUT (M10X1.5-THD)  
31. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
33. 8T-4189 M [4] BOLT (M8X1.25X20-MM)  
34. 5P-4116 [4] WASHER-HARD (8.8X20.5X2-MM THK)  
35. 8T-4815 [2] ROD END  
36. 8T-9501 [2] SCREW (10-16X0.75-IN)  
37. 9R-2807 [1] CLIP  
38. 9R-3067 [1] PIN  
39. 3E-6600 E SEAL (7-CM)  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

Information:

Caterpillar Parts SIS Catalog 428E :

CONSOLE GP-OPERATOR
206-1700 CONSOLE GP-OPERATOR
CONDENSER & MTG GP-REFRIGERANT
301-9725 CONDENSER & MTG GP-REFRIGERANT
COMPRESSOR GP-REFRIGERANT
395-2123 COMPRESSOR GP-REFRIGERANT
COMPRESSOR GP-REFRIGERANT
321-7038 COMPRESSOR GP-REFRIGERANT
COMPRESSOR GP-REFRIGERANT
299-2212 COMPRESSOR GP-REFRIGERANT
CANOPY GP-OPEN ROPS
316-7286 CANOPY GP-OPEN ROPS
310-4338 CANOPY AR-OPEN ROPS
CAB GP-ENCLOSED ROPS
316-7288 CAB GP-ENCLOSED ROPS
CONSOLE GP-OPERATOR
317-5539 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
317-5539 CONSOLE GP-OPERATOR
CONTROL & MTG GP-STABILIZER
221-3004 CONTROL & MTG GP-STABILIZER
CONTROL GP-HYDRAULIC HAND
209-3372 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
221-3005 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
231-2870 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
231-2871 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
267-4505 CONTROL GP-HYDRAULIC HAND

Truck sale:

Caterpillar 428E
 
Caterpillar 428E
- backhoe loader
BERGERAT MONNOYEUR SP. Z O.O.
Caterpillar 428E
 
Caterpillar 428E
- backhoe loader
BERGERAT MONNOYEUR ROMANIA
Caterpillar 428E, backhoe loader, Construction
 
Caterpillar 428E, backhoe loader, Construction

BERGERAT MONNOYEUR SP. Z O.O.
Caterpillar 428E, graaf-laadcombinaties, Bouw
27.850 
Caterpillar 428E, graaf-laadcombinaties, Bouw

BERGERAT MONNOYEUR SP. Z O.O.
 
27.561 
Caterpillar 428E SPECIAL99, baggerlader, Bau-Und Bergbauausrüstung


Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.