OPERATOR STATION
CONTROL GP-HYDRAULICCONTROL GP-HYDRAULIC LOCKOUT
CONTROL GP-HYDRAULIC
CONTROL GP-STABILIZER
CONTROL GP-STEERING
CONTROL GP-TRANSMISSION
WIPER GP-WINDOW
OPERATOR STATION
CONTROL GP-HYDRAULIC
#SEBP46230770
275-9852: CONTROL GP-HYDRAULIC HAND
275-9852 CONTROL GP-HYDRAULIC HAND -KIT, EXCAVATOR PATTERN
S/N DXC1-UP
AN ATTACHMENT
S/N DXC1-UP
AN ATTACHMENT
For full view, you need register
Parts for your 428E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 142-7405 | [2] | COLLAR | |
| 2. | 164-1361 | [2] | BOOT | |
| 3. | 164-1371 | [2] | PLATE | |
| 4. | 164-1399 | [2] | KNOB | |
| 5. | 164-1421 | [1] | PLATE | |
| 6. | 164-1422 | [1] | SHAFT AS | |
| 7. | 164-1425 | [1] | COUPLER AS | |
| 8. | 164-1427 | [2] | ROD | |
| 9. | 164-1429 | [1] | COUPLER AS | |
| 10. | 164-1435 | [2] | PLATE | |
| 11. | 164-1438 | [2] | ROD | |
| 12. | 164-1441 | [2] | ROD | |
| 13. | 170-6312 | [4] | BEARING | |
| 14. | 190-5128 | [1] | FILM-INSTRUCTION (EXCAVATOR CONTROL) | |
| 15. | 206-1672 | [1] | CONSOLE (REAR) | |
| 16. | 206-1673 | [1] | CONSOLE AS (REAR) | |
| 172-8591 M | [2] | NUT-CLIP (M6X1-THD) | ||
| 17. | 231-2872 | [1] | LEVER AS (RH) | |
| 18. | 231-2873 | [1] | LEVER AS (LH) | |
| 19. | 248-2715 | [1] | TOWER AS | |
| 20. | 257-4293 | [1] | GASKET | |
| 21. | 164-1402 | [2] | SLEEVE | |
| 22. | 164-1404 | [2] | SPACER (10.67X16.95X23-MM THK) | |
| 23. | 6V-7744 M | [14] | LOCKNUT (M10X1.5-THD) | |
| 24. | 6V-8932 M | [2] | SETSCREW-SOCKET (M6X1X10-MM) | |
| 25. | 7X-7729 | [8] | WASHER (11X25X3-MM THK) | |
| 26. | 8T-4121 | [21] | WASHER-HARD (11X21X2.5-MM THK) | |
| 27. | 8T-4133 M | [16] | NUT (M10X1.5-THD) | |
| 28. | 8T-4138 M | [6] | BOLT (M6X1X20-MM) | |
| 29. | 8T-4172 M | [2] | BOLT (M10X1.5X80-MM) | |
| 30. | 8T-4195 M | [7] | BOLT (M10X1.5X30-MM) | |
| 31. | 8T-4773 | [10] | BALL JOINT | |
| 32. | 8T-4815 | [2] | ROD END | |
| 33. | 8T-6466 M | [2] | BOLT (M10X1.5X60-MM) | |
| 34. | 9R-2806 | [2] | PIN | |
| 35. | 9R-2807 | [2] | CLIP | |
| 36. | 9R-9901 | [6] | FASTENER (CLIP) | |
| 37. | 9X-2038 | [4] | WASHER (7X19X2-MM THK) | |
| 38. | 9X-2045 M | [6] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 39. | 9X-8256 | [6] | WASHER (6.6X12X2-MM THK) | |
| M | METRIC PART | |||
#SEBP46230771
226-3794: CONTROL GP-HYDRAULIC LOCKOUT
226-3794 CONTROL GP-HYDRAULIC LOCKOUT -LOADER
S/N DXC1-UP
PART OF 214-7017 CONVERSION AR-CERTIFICATION
AN ATTACHMENT
S/N DXC1-UP
PART OF 214-7017 CONVERSION AR-CERTIFICATION
AN ATTACHMENT
For full view, you need register
Parts for your 428E BACKHOE LOADER:
CATERPILLAR SIS#SEBP46230772
231-2879: CONTROL GP-HYDRAULIC LOCKOUT
231-2879 CONTROL GP-HYDRAULIC LOCKOUT -PEDAL, BACKHOE
S/N DXC1-UP
PART OF 214-7017 CONVERSION AR-CERTIFICATION
AN ATTACHMENT
S/N DXC1-UP
PART OF 214-7017 CONVERSION AR-CERTIFICATION
AN ATTACHMENT
For full view, you need register
Parts for your 428E BACKHOE LOADER:
CATERPILLAR SIS#SEBP46230773
231-2880: CONTROL GP-HYDRAULIC LOCKOUT
231-2880 CONTROL GP-HYDRAULIC LOCKOUT -BACKHOE
S/N DXC1-UP
PART OF 214-7017 CONVERSION AR-CERTIFICATION
AN ATTACHMENT
S/N DXC1-UP
PART OF 214-7017 CONVERSION AR-CERTIFICATION
AN ATTACHMENT
For full view, you need register
Parts for your 428E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 353-3699 | [1] | PIN |
#SEBP46230774
259-1879: CONTROL GP-HYDRAULIC PEDAL
259-1879 CONTROL GP-HYDRAULIC PEDAL -RH
S/N DXC1-UP
PART OF 229-7197 VALVE AR-BANK 7
AN ATTACHMENT
S/N DXC1-UP
PART OF 229-7197 VALVE AR-BANK 7
AN ATTACHMENT
For full view, you need register
Parts for your 428E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-6431 | [1] | ROD END | |
| 2. | 133-8916 B | [1] | FILM-INSTRUCTION (EXTENDABLE STICK) | |
| 3. | 164-1549 | [1] | ROD | |
| 4. | 198-0098 B | [1] | FILM-INSTRUCTION (AUXILIARY) | |
| 5. | 231-2875 | [1] | SUPPORT AS (RH) | |
| 6. | 231-2876 | [1] | PEDAL AS (RH) | |
| 7. | 232-1540 | [1] | SEAL | |
| 8. | 164-1547 | [1] | SHAFT AS | |
| 9. | 179-8235 | [1] | LOCK PIN | |
| 10. | 6V-7744 M | [1] | LOCKNUT (M10X1.5-THD) | |
| 11. | 6V-8335 M | [1] | BOLT-SELF-LOCKING (M10X1.5X40-MM) | |
| 12. | 8C-4987 | [1] | PIN-CLEVIS | |
| 13. | 8M-3175 | [1] | WASHER-HARD (10.2X16X3-MM THK) | |
| 14. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 15. | 8T-4133 M | [2] | NUT (M10X1.5-THD) | |
| 16. | 8T-4186 M | [1] | BOLT (M10X1.5X40-MM) | |
| 17. | 8T-4195 M | [2] | BOLT (M10X1.5X30-MM) | |
| 18. | 8T-4815 | [1] | ROD END | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
#SEBP46230775
253-8987: CONTROL GP-STABILIZER
For full view, you need register
Parts for your 428E BACKHOE LOADER:
CATERPILLAR SIS#SEBP46230776
317-5538: CONTROL GP-STEERING
317-5538 CONTROL GP-STEERING -TILT
S/N DXC1-UP
PART OF 310-4341, 310-4343 CAB AR-ENCLOSED ROPS, 310-4338 CANOPY AR-OPEN ROPS
AN ATTACHMENT
S/N DXC1-UP
PART OF 310-4341, 310-4343 CAB AR-ENCLOSED ROPS, 310-4338 CANOPY AR-OPEN ROPS
AN ATTACHMENT
For full view, you need register
Parts for your 428E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 206-1632 | [1] | PLATE AS | |
| 2. | 255-2749 | [1] | PLUG | |
| 3. | 310-6216 Y | [1] | STEERING COLUMN GP (TILT) | |
| 4. | 317-5541 | [1] | STEERING WHEEL | |
| 5. | 325-9308 | [1] | KNOB AS | |
| 6. | 7X-7729 | [6] | WASHER (11X25X3-MM THK) | |
| 7. | 8R-2916 | [1] | COVER AS (CAT STEERING WHEEL) | |
| 8. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 9. | 8T-4133 M | [2] | NUT (M10X1.5-THD) | |
| 10. | 8T-4136 M | [4] | BOLT (M10X1.5X25-MM) | |
| 11. | 8T-4195 M | [4] | BOLT (M10X1.5X30-MM) | |
| 12. | 8T-8894 M | [1] | BOLT-SOCKET HEAD (M10X1.5X20-MM) | |
| 13. | 363-9061 | [1] | BOOT | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP46230777
311-3641: CONTROL GP-TRANSMISSION
311-3641 CONTROL GP-TRANSMISSION
S/N DXC1-UP
PART OF 311-7323 POWER TRAIN AR
Type 1
AN ATTACHMENT
S/N DXC1-UP
PART OF 311-7323 POWER TRAIN AR
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your 428E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 2. | 9R-1766 | [1] | COVER-BOTTOM | |
| 3. | 9R-1767 | [1] | BOOT | |
| 4. | 107-5591 | [1] | NUT-JAM (3/4-16-THD) | |
| 5. | 164-1153 | [1] | KNOB (UPPER) | |
| 6. | 164-1368 | [8] | FASTENER | |
| 7. | 206-1669 | [1] | BOOT | |
| 8. | 220-3469 | [1] | ROD AS | |
| 9. | 220-3470 | [1] | BOOT-SEAL | |
| 10. | 230-2389 | [1] | PLATE | |
| 11. | 230-2390 | [1] | PLATE | |
| 12. | 263-7261 | [1] | SWITCH GP-PUSH BUTTON (NEUTRALIZER, DOWNSHIFT) | |
| 13. | 310-9356 | [1] | CONTROL GP-TRANSMISSION | |
| 151-9275 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 14. | 105-3480 M | [2] | BOLT-SOCKET HEAD (M5X0.8X16-MM) | |
| 16. | 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 17. | 8T-4956 M | [1] | BOLT (M12X1.75X35-MM) | |
| 18. | 8T-9501 | [2] | SCREW (10-16X0.75-IN) | |
| M | METRIC PART | |||
#SEBP46230778
311-3641: CONTROL GP-TRANSMISSION
311-3641 CONTROL GP-TRANSMISSION
S/N DXC1-UP
PART OF 311-7323 POWER TRAIN AR
Type 2
AN ATTACHMENT
S/N DXC1-UP
PART OF 311-7323 POWER TRAIN AR
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your 428E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 2. | 9R-1766 | [1] | COVER-BOTTOM | |
| 3. | 9R-1767 | [1] | BOOT | |
| 4. | 107-5591 | [1] | NUT-JAM (3/4-16-THD) | |
| 5. | 164-1153 | [1] | KNOB (UPPER) | |
| 6. | 164-1368 | [8] | FASTENER | |
| 7. | 206-1669 | [1] | BOOT | |
| 8. | 328-3211 C | [1] | ROD AS | |
| 9. | 220-3470 | [1] | BOOT-SEAL | |
| 10. | 230-2389 | [1] | PLATE | |
| 11. | 230-2390 | [1] | PLATE | |
| 12. | 263-7261 | [1] | SWITCH GP-PUSH BUTTON (NEUTRALIZER, DOWNSHIFT) | |
| 13. | 310-9356 | [1] | CONTROL GP-TRANSMISSION | |
| 151-9275 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 14. | 105-3480 M | [2] | BOLT-SOCKET HEAD (M5X0.8X16-MM) | |
| 15. | 3S-2093 | [1] | STRAP-CABLE | |
| 16. | 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 17. | 8T-4956 M | [1] | BOLT (M12X1.75X35-MM) | |
| 18. | 8T-9501 | [2] | SCREW (10-16X0.75-IN) | |
| 19. | 7X-0620 | [1] | WASHER-HARD (5.5X13X1.6-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#SEBP46230779
220-3785: COVER GP-WIPER MOTOR
220-3785 COVER GP-WIPER MOTOR
S/N DXC1-UP
PART OF 310-4338 CANOPY AR-OPEN ROPS
AN ATTACHMENT
S/N DXC1-UP
PART OF 310-4338 CANOPY AR-OPEN ROPS
AN ATTACHMENT
For full view, you need register
