HYDRAULIC SYSTEM
VALVE GP-PILOTHYDRAULIC SYSTEM
VALVE GP-PILOT
#SEBP46270700
218-5618: CONTROL GP-PILOT OPERATED HYD
218-5618 CONTROL GP-PILOT OPERATED HYD
S/N HEN6863-UP
PART OF 295-7495, 295-7496, 342-5005, 342-5007 CONTROL AR-MACHINE
CANNOT BE USED WITH @@@@@218-5611@@@@@, @@@@@218-5612@@@@@
AN ATTACHMENT
S/N HEN6863-UP
PART OF 295-7495, 295-7496, 342-5005, 342-5007 CONTROL AR-MACHINE
CANNOT BE USED WITH @@@@@218-5611@@@@@, @@@@@218-5612@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your 236B SKID STEER LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 095-1207 M | [1] | NUT (M12X1.75-THD) | |
| 2. | 216-4704 | [1] | HARNESS AS-OPERATOR CONTROLS (JOYSTICK) | |
| 9X-3401 | [8] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [8] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 8T-8737 | [9] | PLUG-SEAL | ||
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (INCLUDES RECPETACLE AS & WEDGE) | ||||
| 180-9340 | [11] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 8L-8413 | [5] | STRAP-CABLE (WHITE) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(15-CM) | |||
| 3. | 218-6421 | [1] | BRACKET AS | |
| 4. | 299-9119 CY | [1] | VALVE GP-PILOT (WORK TOOL) | |
| 5. | 231-4260 Y | [1] | CONTROL GP-HANDLE (RH)(WORK TOOL) | |
| 6. | 235-5243 | [1] | FILM-INSTRUCTION (MACHINE CONTROLS) | |
| 7. | 8T-0269 M | [3] | BOLT-SOCKET HEAD (M6X1X20-MM) | |
| 8. | 8T-4205 | [3] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP46270701
218-5930: CONTROL GP-PILOT OPERATED HYD
218-5930 CONTROL GP-PILOT OPERATED HYD
S/N HEN6750-6862
PART OF 218-5603 DRIVE CONTROL AR-HYDROSTATIC
CANNOT BE USED WITH @@@@@218-5931@@@@@, @@@@@218-5932@@@@@
AN ATTACHMENT
S/N HEN6750-6862
PART OF 218-5603 DRIVE CONTROL AR-HYDROSTATIC
CANNOT BE USED WITH @@@@@218-5931@@@@@, @@@@@218-5932@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your 236B SKID STEER LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 110-8760 | [1] | STRAP | |
| 3. | 218-6119 Y | [1] | VALVE GP-PILOT (DIRECTION, SPEED) | |
| 4. | 218-6422 | [1] | BRACKET AS | |
| 5. | 218-6480 Y | [1] | CONTROL GP-HANDLE (DIRECTION, SPEED) | |
| 6. | 237-5331 | [1] | FILM-INSTRUCTION (MACHINE CONTROL, READ OMM) | |
| 7. | 8T-0269 M | [3] | BOLT-SOCKET HEAD (M6X1X20-MM) | |
| 8. | 8T-4205 | [3] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP46270702
218-5930: CONTROL GP-PILOT OPERATED HYD
218-5930 CONTROL GP-PILOT OPERATED HYD
S/N HEN6863-UP
PART OF 218-5603 DRIVE CONTROL AR-HYDROSTATIC
CANNOT BE USED WITH @@@@@218-5931@@@@@, @@@@@218-5932@@@@@
AN ATTACHMENT
S/N HEN6863-UP
PART OF 218-5603 DRIVE CONTROL AR-HYDROSTATIC
CANNOT BE USED WITH @@@@@218-5931@@@@@, @@@@@218-5932@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your 236B SKID STEER LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 218-6422 | [1] | BRACKET AS | |
| 2. | 218-6480 Y | [1] | CONTROL GP-HANDLE (DIRECTION, SPEED) | |
| 3. | 299-9116 CY | [1] | VALVE GP-PILOT (DIRECTION, SPEED) | |
| 4. | 237-5331 | [1] | FILM-INSTRUCTION (MACHINE CONTROL, READ OMM) | |
| 5. | 8T-0269 M | [3] | BOLT-SOCKET HEAD (M6X1X20-MM) | |
| 6. | 8T-4205 | [3] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP46270703
218-5931: CONTROL GP-PILOT OPERATED HYD
218-5931 CONTROL GP-PILOT OPERATED HYD
S/N HEN6750-7110
PART OF 218-5604 DRIVE CONTROL AR-HYDROSTATIC
CANNOT BE USED WITH @@@@@218-5930@@@@@, @@@@@218-5932@@@@@
AN ATTACHMENT
S/N HEN6750-7110
PART OF 218-5604 DRIVE CONTROL AR-HYDROSTATIC
CANNOT BE USED WITH @@@@@218-5930@@@@@, @@@@@218-5932@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your 236B SKID STEER LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 110-8760 | [1] | STRAP | |
| 2. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| 3. | 164-9425 | [1] | HORN AS (12-VOLT, LOW TONE) | |
| 4. | 8T-4205 | [3] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 5. | 218-6119 Y | [1] | VALVE GP-PILOT (DIRECTION, SPEED) | |
| 6. | 218-6422 | [1] | BRACKET AS | |
| 7. | 218-6485 Y | [1] | CONTROL GP-HANDLE (LH)(DIRECTION, SPEED) | |
| 8. | 237-5331 | [1] | FILM-INSTRUCTION (MACHINE CONTROL, READ OMM) | |
| 9. | 8T-0269 M | [3] | BOLT-SOCKET HEAD (M6X1X20-MM) | |
| 10. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP46270704
218-5931: CONTROL GP-PILOT OPERATED HYD
218-5931 CONTROL GP-PILOT OPERATED HYD
S/N HEN7111-9922
PART OF 218-5604 DRIVE CONTROL AR-HYDROSTATIC
CANNOT BE USED WITH @@@@@218-5930@@@@@, @@@@@218-5932@@@@@
AN ATTACHMENT
S/N HEN7111-9922
PART OF 218-5604 DRIVE CONTROL AR-HYDROSTATIC
CANNOT BE USED WITH @@@@@218-5930@@@@@, @@@@@218-5932@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your 236B SKID STEER LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 218-6422 | [1] | BRACKET AS | |
| 2. | 218-6485 Y | [1] | CONTROL GP-HANDLE (LH) | |
| 3. | 299-9116 CY | [1] | VALVE GP-PILOT (DIRECTION, SPEED) | |
| 4. | 164-9425 | [1] | HORN AS (12-VOLT, LOW TONE) | |
| 5. | 237-5331 | [1] | FILM-INSTRUCTION (MACHINE CONTROL, READ OMM) | |
| 6. | 8T-0269 M | [3] | BOLT-SOCKET HEAD (M6X1X20-MM) | |
| 7. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 8. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| 9. | 8T-4205 | [3] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP46270705
218-5932: CONTROL GP-PILOT OPERATED HYD
218-5932 CONTROL GP-PILOT OPERATED HYD
S/N HEN6750-7110
PART OF 218-5605 DRIVE CONTROL AR-HYDROSTATIC
CANNOT BE USED WITH @@@@@218-5930@@@@@, @@@@@218-5931@@@@@
AN ATTACHMENT
S/N HEN6750-7110
PART OF 218-5605 DRIVE CONTROL AR-HYDROSTATIC
CANNOT BE USED WITH @@@@@218-5930@@@@@, @@@@@218-5931@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your 236B SKID STEER LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 095-1207 M | [1] | NUT (M12X1.75-THD) | |
| 2. | 110-8760 | [1] | STRAP | |
| 3. | 218-6119 Y | [1] | VALVE GP-PILOT (DIRECTION, SPEED) | |
| 4. | 218-6422 | [1] | BRACKET AS | |
| 5. | 231-4256 Y | [1] | CONTROL GP-HANDLE (LH)(DIRECTION, SPEED) | |
| 6. | 235-5246 | [1] | FILM-INSTRUCTION (MACHINE CONTROL, READ OMM) | |
| 7. | 8T-0269 M | [3] | BOLT-SOCKET HEAD (M6X1X20-MM) | |
| 8. | 8T-4205 | [3] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 9. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| 10. | 164-9425 | [1] | HORN AS (12-VOLT, LOW TONE) | |
| 11. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP46270706
218-5932: CONTROL GP-PILOT OPERATED HYD
218-5932 CONTROL GP-PILOT OPERATED HYD
S/N HEN7111-9922
PART OF 218-5605 DRIVE CONTROL AR-HYDROSTATIC
CANNOT BE USED WITH @@@@@218-5930@@@@@, @@@@@218-5931@@@@@
AN ATTACHMENT
S/N HEN7111-9922
PART OF 218-5605 DRIVE CONTROL AR-HYDROSTATIC
CANNOT BE USED WITH @@@@@218-5930@@@@@, @@@@@218-5931@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your 236B SKID STEER LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 095-1207 M | [1] | NUT (M12X1.75-THD) | |
| 2. | 218-6422 | [1] | BRACKET AS | |
| 3. | 299-9116 CY | [1] | VALVE GP-PILOT (DIRECTION, SPEED) | |
| 4. | 164-9425 | [1] | HORN AS (12-VOLT, LOW TONE) | |
| 5. | 231-4256 Y | [1] | CONTROL GP-HANDLE (LH)(DIRECTION, SPEED) | |
| 6. | 235-5246 | [1] | FILM-INSTRUCTION (MACHINE CONTROL, READ OMM) | |
| CENTER FILM ON CANOPY | ||||
| 7. | 8T-0269 M | [3] | BOLT-SOCKET HEAD (M6X1X20-MM) | |
| 8. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 9. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| 10. | 8T-4205 | [3] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP46270707
218-5933: CONTROL GP-PILOT OPERATED HYD
218-5933 CONTROL GP-PILOT OPERATED HYD
S/N HEN6750-UP
PART OF 218-5606, 218-5608 DRIVE CONTROL AR-HYDROSTATIC
Type 1
AN ATTACHMENT
S/N HEN6750-UP
PART OF 218-5606, 218-5608 DRIVE CONTROL AR-HYDROSTATIC
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your 236B SKID STEER LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 095-1207 M | [1] | NUT (M12X1.75-THD) | |
| 2. | 110-8760 | [1] | STRAP | |
| 3. | 8T-4205 | [3] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 4. | 8T-0269 M | [3] | BOLT-SOCKET HEAD (M6X1X20-MM) | |
| 5. | 235-5246 | [1] | FILM-INSTRUCTION (MACHINE CONTROL, READ OMM) | |
| 6. | 218-6119 Y | [1] | VALVE GP-PILOT (DIRECTION, SPEED) | |
| 7. | 218-6422 | [1] | BRACKET AS | |
| 8. | 225-7960 Y | [1] | WIRING GP-WORK TOOL (RADIAL LIFT) | |
| 9. | 231-4258 Y | [1] | CONTROL GP-HANDLE (LH)(DIRECTION, SPEED) | |
| 113-8490 BF | [1] | FUSE (10-AMPERE) | ||
| 164-9425 BF | [1] | HORN AS (12-VOLT, LOW TONE) | ||
| 177-9853 BF | [1] | RECEPTACLE AS (2-PIN) | ||
| 178-3586 F | [1] | LOCK | ||
| 8T-4121 BF | [1] | WASHER-HARD (11X21X2.5-MM THK) | ||
| 8T-4137 BFM | [1] | BOLT (M10X1.5X20-MM) | ||
| B | USE AS REQUIRED | |||
| F | NOT SHOWN | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP46270708
218-5933: CONTROL GP-PILOT OPERATED HYD
218-5933 CONTROL GP-PILOT OPERATED HYD
S/N HEN6750-UP
PART OF 218-5606, 218-5608 DRIVE CONTROL AR-HYDROSTATIC
Type 2
AN ATTACHMENT
S/N HEN6750-UP
PART OF 218-5606, 218-5608 DRIVE CONTROL AR-HYDROSTATIC
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your 236B SKID STEER LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 095-1207 M | [1] | NUT (M12X1.75-THD) | |
| 2. | 8T-4205 | [3] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 3. | 218-6422 | [1] | BRACKET AS | |
| 4. | 225-7960 Y | [1] | WIRING GP-WORK TOOL (RADIAL LIFT) | |
| 5. | 299-9116 CY | [1] | VALVE GP-PILOT (DIRECTION, SPEED) | |
| 6. | 164-9425 | [1] | HORN AS (12-VOLT, LOW TONE) | |
| 7. | 231-4258 Y | [1] | CONTROL GP-HANDLE (LH) | |
| 8. | 235-5246 | [1] | FILM-INSTRUCTION (MACHINE CONTROL, READ OMM) | |
| 9. | 8T-0269 M | [3] | BOLT-SOCKET HEAD (M6X1X20-MM) | |
| 10. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 11. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP46270709
218-5934: CONTROL GP-PILOT OPERATED HYD
218-5934 CONTROL GP-PILOT OPERATED HYD
S/N HEN6750-7110
PART OF 218-5607, 295-7497 DRIVE CONTROL AR-HYDROSTATIC
AN ATTACHMENT
S/N HEN6750-7110
PART OF 218-5607, 295-7497 DRIVE CONTROL AR-HYDROSTATIC
AN ATTACHMENT
For full view, you need register
Parts for your 236B SKID STEER LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 095-1207 M | [1] | NUT (M12X1.75-THD) | |
| 2. | 110-8760 | [1] | STRAP | |
| 3. | 113-8490 | [1] | FUSE (10-AMPERE) | |
| 4. | 164-9425 | [1] | HORN AS (12-VOLT, LOW TONE) | |
| 177-9853 | [1] | RECEPTACLE AS (2-PIN) | ||
| 178-3586 | [1] | LOCK | ||
| 5. | 218-6119 Y | [1] | VALVE GP-PILOT (DIRECTION, SPEED) | |
| 6. | 218-6422 | [1] | BRACKET AS | |
| 7. | 231-4258 Y | [1] | CONTROL GP-HANDLE (LH)(SPEED & DIRECTION) | |
| 8. | 235-5246 | [1] | FILM-INSTRUCTION (MACHINE CONTROL, READ OMM) | |
| 9. | 8T-0269 M | [3] | BOLT-SOCKET HEAD (M6X1X20-MM) | |
| 10. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 11. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| 12. | 8T-4205 | [3] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 13. | 133-9931 | [1] | JUMPER AS (2-SPEED) | |
| 3E-3371 | [1] | WEDGE-RECEPTACLE LOCK (3-PIN) | ||
| 186-3735 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [1] | PLUG-SEAL | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| 5P-5677 D | WIRE (18-GA, BLACK)(0.1-M) | |||
| D | ORDER BY THE METER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
