OPERATOR STATION
CONTROL GP-HANDLEHYDRAULIC SYSTEM
VALVE GP-PILOTOPERATOR STATION
CONTROL GP-HANDLE
#SEBP46340720
231-4256: CONTROL GP-HANDLE
231-4256 CONTROL GP-HANDLE -LH
S/N MTL5075-UP
PART OF 218-5972 CONTROL GP-PILOT OPERATED HYD
AN ATTACHMENT
S/N MTL5075-UP
PART OF 218-5972 CONTROL GP-PILOT OPERATED HYD
AN ATTACHMENT
For full view, you need register
Parts for your 247B MULTI TERRAIN LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 223-3725 | [1] | HANDLE GP-MODULAR | |
| 1A. | 8T-8729 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | |
| 1B. | 174-3091 | [1] | KIT-RECEPTACLE (12-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 2. | 443-6024 | [1] | BOOT | |
| 3. | 231-4261 | [1] | ADAPTER (LH) | |
| 4. | 213-7489 M | [3] | SCREW (M4X0.7X25-MM) | |
| 5. | 178-9983 M | [3] | LOCKNUT (M4X0.7-THD) | |
| 6. | 1S-9593 | [1] | STRAP-CABLE | |
| 7. | 8T-8737 | [8] | PLUG-SEAL | |
| 8. | 252-6934 | [1] | GROMMET | |
| M | METRIC PART | |||
#SEBP46340721
231-4257: CONTROL GP-HANDLE
231-4257 CONTROL GP-HANDLE -RH
S/N MTL5075-UP
PART OF 218-5612 CONTROL GP-PILOT OPERATED HYD
AN ATTACHMENT
S/N MTL5075-UP
PART OF 218-5612 CONTROL GP-PILOT OPERATED HYD
AN ATTACHMENT
For full view, you need register
Parts for your 247B MULTI TERRAIN LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 223-3725 | [1] | HANDLE GP-MODULAR | |
| 1A. | 8T-8729 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | |
| 1B. | 174-3091 | [1] | KIT-RECEPTACLE (12-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 2. | 443-6024 | [1] | BOOT | |
| 3. | 231-4262 | [1] | ADAPTER (RH) | |
| 4. | 213-7489 M | [3] | SCREW (M4X0.7X25-MM) | |
| 5. | 178-9983 M | [3] | LOCKNUT (M4X0.7-THD) | |
| 6. | 1S-9593 | [1] | STRAP-CABLE | |
| 7. | 8T-8737 | [8] | PLUG-SEAL | |
| 8. | 252-6934 | [1] | GROMMET | |
| M | METRIC PART | |||
#SEBP46340722
231-4258: CONTROL GP-HANDLE
231-4258 CONTROL GP-HANDLE -LH
S/N MTL5075-UP
PART OF 218-5973 CONTROL GP-PILOT OPERATED HYD, 233-5706 KIT-WORK TOOL CONTROL & WIRING
AN ATTACHMENT
S/N MTL5075-UP
PART OF 218-5973 CONTROL GP-PILOT OPERATED HYD, 233-5706 KIT-WORK TOOL CONTROL & WIRING
AN ATTACHMENT
For full view, you need register
Parts for your 247B MULTI TERRAIN LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 223-3726 | [1] | HANDLE GP-MODULAR | |
| 1A. | 8T-8729 | [9] | PIN-CONNECTOR (16-GA TO 18-GA) | |
| 1B. | 174-3091 | [1] | KIT-RECEPTACLE (12-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 2. | 443-6024 | [1] | BOOT | |
| 3. | 231-4261 | [1] | ADAPTER (LH) | |
| 4. | 213-7489 M | [3] | SCREW (M4X0.7X25-MM) | |
| 5. | 178-9983 M | [3] | LOCKNUT (M4X0.7-THD) | |
| 6. | 1S-9593 | [1] | STRAP-CABLE | |
| 7. | 8T-8737 | [3] | PLUG-SEAL | |
| 8. | 252-6934 | [1] | GROMMET | |
| M | METRIC PART | |||
#SEBP46340723
231-4260: CONTROL GP-HANDLE
231-4260 CONTROL GP-HANDLE -RH
S/N MTL5075-UP
PART OF 218-5618 CONTROL GP-PILOT OPERATED HYD
AN ATTACHMENT
S/N MTL5075-UP
PART OF 218-5618 CONTROL GP-PILOT OPERATED HYD
AN ATTACHMENT
For full view, you need register
Parts for your 247B MULTI TERRAIN LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 215-8307 | [1] | CONTROL GP-HANDLE | |
| 1A. | 8T-8729 | [7] | PIN-CONNECTOR (16-GA TO 18-GA) | |
| 1B. | 174-3091 | [1] | KIT-RECEPTACLE (12-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8737 | [5] | PLUG-SEAL | ||
| 2. | 443-6024 | [1] | BOOT | |
| 3. | 231-4262 | [1] | ADAPTER (RH) | |
| 4. | 213-7489 M | [3] | SCREW (M4X0.7X25-MM) | |
| 5. | 178-9983 M | [3] | LOCKNUT (M4X0.7-THD) | |
| 6. | 1S-9593 | [1] | STRAP-CABLE | |
| 7. | 8T-8737 | [5] | PLUG-SEAL | |
| 8. | 252-6934 | [1] | GROMMET | |
| M | METRIC PART | |||
#SEBP46340724
218-5611: CONTROL GP-PILOT OPERATED HYD
218-5611 CONTROL GP-PILOT OPERATED HYD
S/N MTL5075-5159
PART OF 295-7501 CONTROL AR-MACHINE
CANNOT BE USED WITH @@@@@218-5612@@@@@, @@@@@218-5618@@@@@
AN ATTACHMENT
S/N MTL5075-5159
PART OF 295-7501 CONTROL AR-MACHINE
CANNOT BE USED WITH @@@@@218-5612@@@@@, @@@@@218-5618@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your 247B MULTI TERRAIN LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-4205 | [3] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 2. | 110-8760 | [1] | STRAP | |
| 3. | 216-4704 | [1] | HARNESS AS-OPERATOR CONTROLS (JOYSTICK) | |
| 9X-3401 | [8] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [8] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 8T-8737 | [9] | PLUG-SEAL | ||
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8L-8413 | [5] | STRAP-CABLE (WHITE) | ||
| 180-9340 | [11] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(15-CM) | |||
| 4. | 218-6421 | [1] | BRACKET AS | |
| 5. | 218-6490 Y | [1] | CONTROL GP-HANDLE (WORK TOOL) | |
| 6. | 228-9228 Y | [1] | VALVE GP-PILOT (WORK TOOL) | |
| 7. | 237-5332 | [1] | FILM-INSTRUCTION (MACHINE CONTROLS) | |
| 8. | 8T-0269 M | [3] | BOLT-SOCKET HEAD (M6X1X20-MM) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP46340725
218-5611: CONTROL GP-PILOT OPERATED HYD
218-5611 CONTROL GP-PILOT OPERATED HYD
S/N MTL5160-UP
PART OF 295-7501 CONTROL AR-MACHINE
CANNOT BE USED WITH @@@@@218-5612@@@@@, @@@@@218-5618@@@@@
AN ATTACHMENT
S/N MTL5160-UP
PART OF 295-7501 CONTROL AR-MACHINE
CANNOT BE USED WITH @@@@@218-5612@@@@@, @@@@@218-5618@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your 247B MULTI TERRAIN LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 299-9119 CY | [1] | VALVE GP-PILOT (WORK TOOL) | |
| 2. | 216-4704 | [1] | HARNESS AS-OPERATOR CONTROLS (JOYSTICK) | |
| 9X-3401 | [8] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 8T-8737 | [9] | PLUG-SEAL | ||
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (INCLUDES RECPETACLE AS & WEDGE) | ||||
| 180-9340 | [11] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 8L-8413 | [5] | STRAP-CABLE (WHITE) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(15-CM) | |||
| 3. | 218-6421 | [1] | BRACKET AS | |
| 4. | 218-6490 Y | [1] | CONTROL GP-HANDLE (WORK TOOL) | |
| 5. | 237-5332 | [1] | FILM-INSTRUCTION (MACHINE CONTROLS) | |
| 6. | 8T-0269 M | [3] | BOLT-SOCKET HEAD (M6X1X20-MM) | |
| 7. | 8T-4205 | [3] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP46340726
218-5612: CONTROL GP-PILOT OPERATED HYD
218-5612 CONTROL GP-PILOT OPERATED HYD
S/N MTL5075-5159
CANNOT BE USED WITH @@@@@218-5611@@@@@, @@@@@218-5618@@@@@
AN ATTACHMENT
S/N MTL5075-5159
CANNOT BE USED WITH @@@@@218-5611@@@@@, @@@@@218-5618@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your 247B MULTI TERRAIN LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 095-1207 M | [1] | NUT (M12X1.75-THD) | |
| 2. | 110-8760 | [1] | STRAP | |
| 3. | 216-4704 | [1] | HARNESS AS-OPERATOR CONTROLS (JOYSTICK) | |
| 9X-3401 | [8] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [8] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 8T-8737 | [9] | PLUG-SEAL | ||
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8L-8413 | [5] | STRAP-CABLE (WHITE) | ||
| 180-9340 | [11] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(15-CM) | |||
| 4. | 218-6421 | [1] | BRACKET AS | |
| 5. | 228-9228 Y | [1] | VALVE GP-PILOT (WORK TOOL) | |
| 6. | 231-4257 Y | [1] | CONTROL GP-HANDLE (RH)(WORK TOOL) | |
| 7. | 262-7668 | [1] | FILM-INSTRUCTION (MACHINE CONTROL, READ OMM) | |
| 8. | 8T-0269 M | [3] | BOLT-SOCKET HEAD (M6X1X20-MM) | |
| 9. | 8T-4205 | [3] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP46340727
218-5612: CONTROL GP-PILOT OPERATED HYD
218-5612 CONTROL GP-PILOT OPERATED HYD
S/N MTL5160-UP
CANNOT BE USED WITH @@@@@218-5611@@@@@, @@@@@218-5618@@@@@
AN ATTACHMENT
S/N MTL5160-UP
CANNOT BE USED WITH @@@@@218-5611@@@@@, @@@@@218-5618@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your 247B MULTI TERRAIN LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 095-1207 M | [1] | NUT (M12X1.75-THD) | |
| 2. | 216-4704 | [1] | HARNESS AS-OPERATOR CONTROLS (JOYSTICK) | |
| 9X-3401 | [8] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [8] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 8T-8737 | [9] | PLUG-SEAL | ||
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (INCLUDES RECPETACLE AS & WEDGE) | ||||
| 180-9340 | [11] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 8L-8413 | [5] | STRAP-CABLE (WHITE) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(15-CM) | |||
| 3. | 218-6421 | [1] | BRACKET AS | |
| 4. | 262-7668 | [1] | FILM-INSTRUCTION (MACHINE CONTROL, READ OMM) | |
| 5. | 299-9119 Y | [1] | VALVE GP-PILOT (WORK TOOL) | |
| 6. | 231-4257 Y | [1] | CONTROL GP-HANDLE (RH)(WORK TOOL) | |
| 7. | 8T-0269 M | [3] | BOLT-SOCKET HEAD (M6X1X20-MM) | |
| 8. | 8T-4205 | [3] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP46340728
218-5618: CONTROL GP-PILOT OPERATED HYD
218-5618 CONTROL GP-PILOT OPERATED HYD
S/N MTL5075-5159
PART OF 295-7503, 342-5003 CONTROL AR-MACHINE
CANNOT BE USED WITH @@@@@218-5611@@@@@, @@@@@218-5612@@@@@
AN ATTACHMENT
S/N MTL5075-5159
PART OF 295-7503, 342-5003 CONTROL AR-MACHINE
CANNOT BE USED WITH @@@@@218-5611@@@@@, @@@@@218-5612@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your 247B MULTI TERRAIN LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 095-1207 M | [1] | NUT (M12X1.75-THD) | |
| 2. | 110-8760 | [1] | STRAP | |
| 3. | 216-4704 | [1] | HARNESS AS-OPERATOR CONTROLS (JOYSTICK) | |
| 9X-3401 | [8] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [8] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 8T-8737 | [9] | PLUG-SEAL | ||
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8L-8413 | [5] | STRAP-CABLE (WHITE) | ||
| 180-9340 | [11] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(15-CM) | |||
| 4. | 218-6421 | [1] | BRACKET AS | |
| 5. | 228-9228 Y | [1] | VALVE GP-PILOT (WORK TOOL) | |
| 6. | 231-4260 Y | [1] | CONTROL GP-HANDLE (RH)(WORK TOOL) | |
| 7. | 235-5243 | [1] | FILM-INSTRUCTION (MACHINE CONTROLS) | |
| 8. | 8T-0269 M | [3] | BOLT-SOCKET HEAD (M6X1X20-MM) | |
| 9. | 8T-4205 | [3] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP46340729
218-5618: CONTROL GP-PILOT OPERATED HYD
218-5618 CONTROL GP-PILOT OPERATED HYD
S/N MTL5160-UP
PART OF 295-7503, 342-5003 CONTROL AR-MACHINE
CANNOT BE USED WITH @@@@@218-5611@@@@@, @@@@@218-5612@@@@@
AN ATTACHMENT
S/N MTL5160-UP
PART OF 295-7503, 342-5003 CONTROL AR-MACHINE
CANNOT BE USED WITH @@@@@218-5611@@@@@, @@@@@218-5612@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your 247B MULTI TERRAIN LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 095-1207 M | [1] | NUT (M12X1.75-THD) | |
| 2. | 216-4704 | [1] | HARNESS AS-OPERATOR CONTROLS (JOYSTICK) | |
| 9X-3401 | [8] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [8] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 8T-8737 | [9] | PLUG-SEAL | ||
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (INCLUDES RECPETACLE AS & WEDGE) | ||||
| 180-9340 | [11] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 8L-8413 | [5] | STRAP-CABLE (WHITE) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(15-CM) | |||
| 3. | 218-6421 | [1] | BRACKET AS | |
| 4. | 299-9119 CY | [1] | VALVE GP-PILOT (WORK TOOL) | |
| 5. | 231-4260 Y | [1] | CONTROL GP-HANDLE (RH)(WORK TOOL) | |
| 6. | 235-5243 | [1] | FILM-INSTRUCTION (MACHINE CONTROLS) | |
| 7. | 8T-0269 M | [3] | BOLT-SOCKET HEAD (M6X1X20-MM) | |
| 8. | 8T-4205 | [3] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
