279-7901 INSTALLATION AR-ENGINE S/N CYZ1-415 PART OF 306-6853 GENERAL AR 320D FM EXCAVATOR

Part No	Qty	Parts name
109-9313 Y	[1]	AIR CLEANER & MOUNTING GP
287-0200 Y	[1]	COMPRESSOR GP-REFRIGERANT
273-5167 Y	[1]	CONDENSER & MTG GP-REFRIGERANT
279-7911 Y	[1]	FILTER & MTG GP-ENGINE OIL
272-4744 Y	[1]	LINES GP-AIR (AIR CLEANER TO TURBOCHARGER)
265-3504 Y	[1]	LINES GP-AIR
310-9582 Y	[1]	LINES GP-ENGINE OIL DRAIN
287-0183 Y	[1]	LINES GP-MUFFLER DRAIN
266-6297 Y	[1]	MOUNTING GP-ENGINE
297-7671 Y	[1]	MOUNTING GP-FUEL FILTER
281-3521 Y	[1]	RADIATOR & HYD OIL COOLER GP
		S/N CYZ1-413
281-3634 Y	[1]	RADIATOR & HYD OIL COOLER GP
		S/N CYZ414-415
Y		SEPARATE ILLUSTRATION

#SEBP46360011

305-4744: CAMSHAFT GP

CAMSHAFT GP

305-4744 CAMSHAFT GP
S/N GDC1-UP
PART OF 310-9757 ENGINE AR
ALSO AN ATTACHMENT

i02781970 SEBP4636

For full view, you need register

Parts for your 320D FM EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	305-4756	[1]	CAMSHAFT
2.	324-4060	[12]	TAPPET
3.	294-1716	[12]	PUSHROD
4.	094-4628	[1]	KEY
5.	5I-7650	[1]	PLATE
6.	6V-5215 M	[2]	BOLT (M8X1.25X16-MM)
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP46360012

296-4647: COVER GP-VALVE MECHANISM

COVER GP-VALVE MECHANISM

296-4647 COVER GP-VALVE MECHANISM
S/N GDC1-UP
PART OF 310-9757 ENGINE AR
ALSO AN ATTACHMENT

i02781956 SEBP4636

2964647 COVER GP-VALVE MECHANISM Parts scheme

For full view, you need register

Parts for your 320D FM EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	294-1703	[1]	COVER-ROCKER
2.	324-4220	[1]	COVER-ROCKER
3.	294-1705	[1]	GASKET
4.	294-1706	[1]	GASKET (VALVE COVER)
5.	324-4221	[1]	COVER
6.	294-1708	[1]	CAP (ENGINE OIL FILLER)
7.	294-1709	[1]	BRACKET
8.	294-1710	[8]	BOLT (M6X1X16.2-MM)
9.	294-1711	[16]	WASHER
10.	096-8569	[2]	BOLT (140-MM LG)
11.	294-1712	[1]	SEAL
12.	8T-4224	[9]	WASHER-HARD (8.8X16X2-MM THK)
13.	294-1713	[16]	BOLT (M8X1.25X38.3-MM)
14.	294-1700	[16]	BOLT (M8X1.25X108.3-MM)
15.	095-8799	[7]	BOLT (M8X1.25X30.5-MM)
16.	294-1714	[2]	STUD
17.	294-1821	[2]	BOLT (M8X1.25X35.5-MM)

#SEBP46360013

296-4650: CRANKSHAFT GP

CRANKSHAFT GP

296-4650 CRANKSHAFT GP
S/N GDC1-UP
PART OF 310-9757 ENGINE AR
ALSO AN ATTACHMENT

i02781959 SEBP4636

For full view, you need register

Parts for your 320D FM EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	294-1749	[1]	CRANKSHAFT AS
1A.	085-9513	[2]	PIN
1B.	094-4628	[2]	KEY (CRANKSHAFT)
1C.	130-7596	[1]	NUT
1D.	294-1751	[1]	GEAR (31-TEETH)
2.	233-1277	[1]	PLATE
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP46360014

294-1725: CYLINDER BLOCK GP

CYLINDER BLOCK GP

294-1725 CYLINDER BLOCK GP
S/N GDC1-UP
PART OF 296-4648 CYLINDER BLOCK GP
ALSO AN ATTACHMENT

i02783105 SEBP4636

For full view, you need register

Parts for your 320D FM EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5I-7505	[12]	PLUG
2.	551-1828	[6]	SLEEVE
3.	094-9424	[12]	GASKET
4.	139-7814	[6]	VALVE
5.	5I-8009	[1]	BUSHING
6.	5I-7528	[2]	BUSHING
7.	5I-7529	[1]	BUSHING
8.	3P-1896	[14]	PLUG-CUP
9.	094-7741 M	[14]	BOLT-BEARING CAP (M14X2X120-MM)
10.	095-2005	[2]	CAP
11.	096-3741	[7]	CAP
12.	294-1720	[2]	SEAL
13.	294-1722	[6]	JET
14.	5I-7525	[1]	PLUG
15.	195-8212	[1]	PLUG
16.	294-1721	[1]	SHAFT
17.	5I-7724	[2]	PIN
18.	095-2039	[1]	WASHER-SPECIAL
19.	8T-4191 M	[1]	BOLT (M10X1.5X16-MM)
20.	4I-9664	[2]	PIN
21.	099-4420	[2]	PIN
22.	183-5916	[6]	PIN-SPRING
	M		METRIC PART

#SEBP46360015

296-4648: CYLINDER BLOCK GP

CYLINDER BLOCK GP

296-4648 CYLINDER BLOCK GP
S/N GDC1-UP
PART OF 310-9757 ENGINE AR
ALSO AN ATTACHMENT

i02781957 SEBP4636

For full view, you need register

Parts for your 320D FM EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	324-4175	[1]	EYE
2.	294-1724	[1]	EYE
3.	5I-5181	[2]	BOLT
4.	096-2501	[4]	LOCKWASHER
5.	099-4483 M	[2]	BOLT (M12X1.25X30-MM)
6.	5I-7654	[3]	PLATE (STANDARD)
	5I-7787 AB		PLATE (0.15-MM OS)
	5I-7788 AB		PLATE (0.3-MM OS)
	5I-7789 AB		PLATE (0.45-MM OS)
7.	5I-7588	[7]	SET-BEARING (STANDARD)
	5I-7784 AB		SET-BEARING (0.25-MM US)
	5I-7785 AB		SET-BEARING (0.5-MM US)
	5I-7786 AB		SET-BEARING (0.75-MM US)
8.	294-1725 Y	[1]	CYLINDER BLOCK GP
	A		NOT PART OF THIS GROUP
	B		USE AS REQUIRED
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP46360016

297-7644: CYLINDER HEAD AS

CYLINDER HEAD AS

297-7644 CYLINDER HEAD AS
S/N GDC1-UP
PART OF 296-4645 CYLINDER HEAD GP
ALSO AN ATTACHMENT

i02783103 SEBP4636

For full view, you need register

Parts for your 320D FM EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4I-9664	[2]	PIN
2.	294-1679	[12]	SEAT
3.	294-1680	[12]	SEAT
4.	294-1678	[24]	GUIDE
5.	103-9011	[13]	CAP-SEALING
6.	5I-4915	[9]	CAP

#SEBP46360017

296-4645: CYLINDER HEAD GP

CYLINDER HEAD GP

296-4645 CYLINDER HEAD GP
S/N GDC1-UP
PART OF 310-9757 ENGINE AR
ALSO AN ATTACHMENT

i02781954 SEBP4636

For full view, you need register

Parts for your 320D FM EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	297-7644 Y	[1]	CYLINDER HEAD AS
2.	4I-9664	[2]	PIN
3.	294-1682	[1]	GASKET
4.	294-1683	[26]	BOLT
5.	310-9532	[12]	GUIDE
	Y		SEPARATE ILLUSTRATION

#SEBP46360018

296-4644: FLYWHEEL GP

FLYWHEEL GP

296-4644 FLYWHEEL GP
S/N GDC1-UP
PART OF 310-9757 ENGINE AR
ALSO AN ATTACHMENT

i02781953 SEBP4636

For full view, you need register

Parts for your 320D FM EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	294-1752	[1]	FLYWHEEL AS
1A.	205-6788	[1]	GEAR (127-TEETH)
2.	5I-5005	[6]	BOLT (M12X1.25X35-MM)
3.	096-2501	[6]	LOCKWASHER

#SEBP46360019

296-4651: GEAR GP-FRONT

GEAR GP-FRONT

296-4651 GEAR GP-FRONT
S/N GDC1-UP
PART OF 310-9757 ENGINE AR
ALSO AN ATTACHMENT

i02781960 SEBP4636

For full view, you need register

Parts for your 320D FM EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	294-1753	[1]	GEAR AS-IDLER (69-TEETH)
1A.	296-4673	[1]	BUSHING
2.	294-1754	[1]	GEAR (62-TEETH)
3.	294-1755	[1]	GEAR (62-TEETH)
4.	294-1756	[1]	PLATE
5.	294-1757	[1]	BOLT

Information:

ENGINE ARRANGEMENT

ENGINE AR

Truck Engine News

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/23

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}

Engine News

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/18

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}

Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}
Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}

Operation and Maintenance Manual

Emissions Certification Film
320D Forest Machines

Special Instruction

Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}
Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}

Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}

Storage Procedure for Caterpillar Products {0355, 1000, 7000}
Storage Procedure for Caterpillar Products {0355, 1000, 7000}

Recommended Storage Procedures For Hydraulic Excavators {0355, 1000, 1250, 7000}
Recommended Storage Procedures For Hydraulic Excavators {0355, 1000, 1250, 7000}

Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}

Differences in Appearance of Cat <SUP>®</SUP> Reman Parts when Compared to New Parts {1000, 1250}
Differences in Appearance of Cat ^® Reman Parts when Compared to New Parts {1000, 1250}

Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}
Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}

Service Letter-NACD

PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS

PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN 320D EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN 320D EXCAVATORS

PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK PL121 SATELLITE RADIOS ON CERTAIN EXCAVATORS, WHEELED EXCAVATORS, MATERIAL HANDLERS, AND FOREST MACHINES
PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK PL121 SATELLITE RADIOS ON CERTAIN EXCAVATORS, WHEELED EXCAVATORS, MATERIAL HANDLERS, AND FOREST MACHINES

PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK PL121 SATELLITE RADIOS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK PL121 SATELLITE RADIOS ON CERTAIN CATERPILLAR PRODUCTS

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Technical Information Bulletin

Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}

368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}

Tool Operating Manual

NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}

Service Letter-China

Service Letter-Asia

Reuse And Salvage Guidelines

Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}
Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}

Cleaning Components with Carbon Dioxide (CO<SUB>2</SUB>) {0680, 1000, 7000}
Cleaning Components with Carbon Dioxide (CO₂) {0680, 1000, 7000}

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}

Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}

Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}

Contamination Control Guidelines

Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}

Information Release Memo

REMAN ENGINES DESIGNATED AND LABELED AS REPLACEMENT ENGINES
REMAN ENGINES DESIGNATED AND LABELED AS REPLACEMENT ENGINES

DISCONTINUATION OF REMAN 3044 / 3046 / 3064 / 3066 MHI ENGINES
DISCONTINUATION OF REMAN 3044 / 3046 / 3064 / 3066 MHI ENGINES

Service Letter-APD

Testing and Adjusting

Engine Speed - Check
C4.2 and C6.4 Engines for Caterpillar Built Machines

Technical Analysis

Technical Analysis 1 (TA1) Visual Inspection for Excavator {0372, 1000, 7000, 753T, 7565}
Technical Analysis 1 (TA1) Visual Inspection for Excavator {0372, 1000, 7000, 753T, 7565}

Troubleshooting

System Overview
C4.2 and C6.4 Engines for Caterpillar Built Machines

General Information
C4.2 and C6.4 Engines for Caterpillar Built Machines

Symptom Troubleshooting
C4.2 and C6.4 Engines for Caterpillar Built Machines

Acceleration Is Poor or Throttle Response Is Poor
C4.2 and C6.4 Engines for Caterpillar Built Machines

Engine Has Mechanical Noise (Knock)
C4.2 and C6.4 Engines for Caterpillar Built Machines

Engine Vibration Is Excessive
C4.2 and C6.4 Engines for Caterpillar Built Machines

Engine Speed Does Not Change
C4.2 and C6.4 Engines for Caterpillar Built Machines

Engine Cranks but Does Not Start
C4.2 and C6.4 Engines for Caterpillar Built Machines

Engine Does Not Crank
C4.2 and C6.4 Engines for Caterpillar Built Machines

Engine Misfires, Runs Rough or Is Unstable
C4.2 and C6.4 Engines for Caterpillar Built Machines

Engine Top Speed Is Not Obtained
C4.2 and C6.4 Engines for Caterpillar Built Machines

Component Location
C4.2 and C6.4 Engines for Caterpillar Built Machines

Welding Precaution
C4.2 and C6.4 Engines for Caterpillar Built Machines

Power Is Intermittently Low or Power Cutout Is Intermittent
C4.2 and C6.4 Engines for Caterpillar Built Machines

Engine Stalls at Low RPM
C4.2 and C6.4 Engines for Caterpillar Built Machines

Engine Overspeeds
C4.2 and C6.4 Engines for Caterpillar Built Machines

Disassembly and Assembly

System Pressure - Release
320D Forest Machines Engine Supplement

Service Magazine

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/25

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}

Process to Print Collage Schematics {0374, 1000, 7000}
Process to Print Collage Schematics {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}

A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}
A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}

Caterpillar Parts SIS Catalog 320D FM :

324-3986 ENGINE AR-COMPLETE

324-3984 ENGINE AR-COMPLETE

310-9758 ENGINE AR-COMPLETE

310-9756 ENGINE AR-COMPLETE

310-9757 ENGINE AR

297-7777 ENGINE AR

323-0432 CONVERSION AR

306-6853 GENERAL AR

305-4744 CAMSHAFT GP

296-4647 COVER GP-VALVE MECHANISM

296-4650 CRANKSHAFT GP

294-1725 CYLINDER BLOCK GP

296-4648 CYLINDER BLOCK GP

297-7644 CYLINDER HEAD AS

296-4645 CYLINDER HEAD GP

296-4644 FLYWHEEL GP

Truck sale:

Caterpillar 320D FM
- Knuckleboom loaders
WESTERN STATES EQUIPMENT

105,018

Caterpillar 320D FM, Forestry Excavators, Forestry equipment
- Forestry Excavators
FINNING CANADA

55,000

Caterpillar 320DFMST, Crawler Excavators, Construction
- Crawler Excavators
FINNING CHILE S.A.

47,999

Caterpillar 320DFMLL, Feller Bunchers, Forestry equipment
- Feller Bunchers
TERRA CAT

103,228

Caterpillar 320D FM, Crawler Excavators, Construction
- Crawler Excavators
FINNING CANADA