283-2787 WIRING GP-CHASSIS -HARVESTER S/N CYZ1-312 PART OF 303-8507, 355-2847 CONTROL AR-HARVESTER HEAD AN ATTACHMENT 320D FM

ELECTRICAL AND STARTING SYSTEM

WIRING GP

0. 283-2787 WIRING GP-
1. 319-1387 WIRING GP-
2. 319-5815 WIRING GP-
3. 378-8190 WIRING GP-
4. 420-5922 WIRING GP-
5. 428-9400 WIRING GP-
6. 267-8007 WIRING GP-
7. 267-8007 WIRING GP-
8. 231-1836 WIRING GP-
9. 243-4289 WIRING GP-
0. INFORMATION

EXCAVATOR 320D FM EXCAVATOR CYZ
320D FM Forest Swing Machine CYZ00001-UP (MACHINE) POWERED BY C6.4 Engine SEBP4636 320D FM CYZ (2008)

ELECTRICAL AND STARTING SYSTEM

WIRING GP

392-3194 WIRING GP-CAB RISER

339-1885 WIRING GP-CAB TILT

283-2787 WIRING GP-CHASSIS

319-1387 WIRING GP-CHASSIS

319-5815 WIRING GP-CHASSIS

378-8190 WIRING GP-CHASSIS

#SEBP46360210

283-2787: WIRING GP-CHASSIS

WIRING GP-CHASSIS

283-2787 WIRING GP-CHASSIS -HARVESTER
S/N CYZ1-312
PART OF 303-8507, 355-2847 CONTROL AR-HARVESTER HEAD
AN ATTACHMENT

i03035062 SEBP4636

For full view, you need register

Parts for your 320D FM EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4I-3503	[1]	GROMMET
2.	4I-7889	[3]	SPACER (11X25X45-MM THK)
3.	7K-1181	[12]	STRAP-CABLE
4.	111-4838	[4]	CLIP
5.	111-4839	[4]	STRAP
6.	149-5050	[4]	RELAY (24-VOLT)(HARVESTER)
7.	178-1781	[1]	CLIP
8.	291-7493	[1]	PLATE
9.	291-7494	[1]	COVER AS
10.	299-2710	[1]	HARNESS AS-CHASSIS
	149-5069	[8]	TERMINAL-BLADE (14-GA TO 20-GA)
	149-5070	[10]	TERMINAL-BLADE (16-GA TO 20-GA)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(13-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(5.0-CM)
	2L-8069	[2]	TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW)
	126-1768	[1]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	149-5051	[4]	CONNECTOR-RECEPTACLE
	126-1767	[1]	PIN-CONNECTOR (14-GA TO 16-GA)
	144-1636	[63]	PIN-CONNECTOR (14-GA TO 18-GA)
	230-4011	[1]	PLUG AS-CONNECTOR (2-PIN)
	264-7029	[1]	SEAL-CONNECTOR
	8T-8737	[21]	PLUG-SEAL
	9X-1343	[2]	RECEPTACLE AS-CONNECTOR (40-PIN)
	243-4507	[1]	RECEPTACLE AS-CONNECTOR (4-PIN)
11.	096-6166	[8]	WASHER-HARD (4.5X9X1-MM THK)
12.	162-2165 M	[4]	BOLT-SOCKET HEAD (M4X0.7X16-MM)
13.	6D-4244	[2]	CLIP (LOOP)
14.	7X-2619 M	[4]	BOLT (M6X1X10-MM)
15.	8T-0337 M	[4]	SCREW-MACHINE (M4X0.7X12-MM)
16.	8T-4121	[2]	WASHER-HARD (11X21X2.5-MM THK)
17.	8T-4136 M	[2]	BOLT (M10X1.5X25-MM)
18.	8T-4191 M	[2]	BOLT (M10X1.5X16-MM)
19.	8T-4195 M	[1]	BOLT (M10X1.5X30-MM)
20.	8T-5005 M	[3]	BOLT (M10X1.5X70-MM)
21.	9X-8256	[4]	WASHER (6.6X12X2-MM THK)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP46360211

319-1387: WIRING GP-CHASSIS

WIRING GP-CHASSIS

319-1387 WIRING GP-CHASSIS -CAB, REAR
S/N CYZ1-225
PART OF 306-6855 CHASSIS AR

i02940524 SEBP4636

For full view, you need register

Parts for your 320D FM EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[2]	STRAP-CABLE
2.	7K-1181	[5]	STRAP-CABLE
3.	319-1348	[1]	HARNESS AS-CONTROL (ENGINE START, PUMP CONTROL)
	9W-0852	[2]	PIN-CONNECTOR (14-GA TO 16-GA)
	9X-3401	[4]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	104-6573	[1]	PLUG-CONNECTOR
	155-2270	[2]	KIT-CONNECTING PLUG (2-PIN)
			(EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	230-5010	[1]	PLUG AS-CONNECTOR (6-PIN)
	264-7032	[1]	SEAL-CONNECTOR
	8T-8737	[6]	PLUG-SEAL
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	243-4508	[2]	RECEPTACLE AS-CONNECTOR (6-PIN)
	9X-3402	[4]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[4]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	9W-0844	[2]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	3S-2093	[3]	STRAP-CABLE
	2L-8079	[1]	TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)
	7Y-3951	[3]	TERMINAL-BLADE (14-GA)
	7Y-3993	[1]	TERMINAL-BLADE (12-GA)
	125-7875 D		TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)
	D		ORDER BY THE METER

#SEBP46360212

319-5815: WIRING GP-CHASSIS

WIRING GP-CHASSIS

319-5815 WIRING GP-CHASSIS
S/N CYZ1-UP
PART OF 317-3818, 317-3819 CONTROL AR-GRAPPLE, 317-3821, 355-2846 CONTROL AR-WORK TOOL
AN ATTACHMENT

i03311500 SEBP4636

For full view, you need register

Parts for your 320D FM EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7K-1181 B	[9]	STRAP-CABLE
2.	319-5816	[1]	HARNESS AS-VALVE
	9X-3401	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8729	[6]	PIN-CONNECTOR (16-GA TO 18-GA)
	155-2270	[4]	KIT-CONNECTING PLUG (2-PIN)
			(EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	8T-8737	[8]	PLUG-SEAL
	243-4505	[1]	RECEPTACLE AS-CONNECTOR (2-PIN)
	243-4508	[1]	RECEPTACLE AS-CONNECTOR (6-PIN)
	243-4509	[1]	RECEPTACLE AS-CONNECTOR (8-PIN)
	8T-8730	[8]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	2L-8079	[1]	TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)
	125-7874 D		TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM)
3.	132-5789	[1]	CLIP (LADDER)
4.	8T-4121	[1]	WASHER-HARD (11X21X2.5-MM THK)
5.	8T-4191 M	[1]	BOLT (M10X1.5X16-MM)
	B		USE AS REQUIRED
	D		ORDER BY THE METER
	M		METRIC PART

#SEBP46360213

378-8190: WIRING GP-CHASSIS

WIRING GP-CHASSIS

378-8190 WIRING GP-CHASSIS
S/N CYZ311-UP
PART OF 378-8187, 382-4341 CONTROL AR-HARVESTER HEAD
AN ATTACHMENT

i04675810 SEBP4636

For full view, you need register

Parts for your 320D FM EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4I-7889	[3]	SPACER (11X25X45-MM THK)
2.	7K-1181 B	[20]	STRAP-CABLE
3.	111-4838	[4]	CLIP
4.	111-4839	[4]	STRAP
5.	116-0118	[1]	CLIP
6.	149-5050	[4]	RELAY (24-VOLT)
7.	291-7494	[1]	COVER AS
8.	378-8191	[1]	HARNESS AS-CHASSIS
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8737	[3]	PLUG-SEAL
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(13-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(15-CM)
	9X-3402	[3]	SOCKET-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1768	[3]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	126-1767	[1]	PIN-CONNECTOR (14-GA TO 16-GA)
	126-1768	[1]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	2L-8069	[2]	TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW)
	9X-3401	[7]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[7]	PIN-CONNECTOR (14-GA TO 16-GA)
	149-5051	[4]	CONNECTOR-RECEPTACLE
	149-5069	[8]	TERMINAL-BLADE (14-GA TO 20-GA)
	149-5070	[10]	TERMINAL-BLADE (16-GA TO 20-GA)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
	174-0503	[1]	KIT-CONNECTING PLUG (3-PIN)
			(EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	230-4011	[1]	PLUG AS-CONNECTOR (2-PIN)
	264-7029	[1]	SEAL-CONNECTOR
	243-4507	[1]	RECEPTACLE AS-CONNECTOR (4-PIN)
9.	378-8192	[1]	HARNESS AS-SOLENOID
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[4]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
10.	7X-2619 M	[4]	BOLT (M6X1X10-MM)
11.	8T-4121	[2]	WASHER-HARD (11X21X2.5-MM THK)
12.	8T-4191 M	[2]	BOLT (M10X1.5X16-MM)
13.	8T-4195 M	[1]	BOLT (M10X1.5X30-MM)
14.	8T-5005 M	[3]	BOLT (M10X1.5X70-MM)
15.	9X-8256	[4]	WASHER (6.6X12X2-MM THK)
	B		USE AS REQUIRED
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP46360214

420-5922: WIRING GP-CHASSIS

WIRING GP-CHASSIS

420-5922 WIRING GP-CHASSIS
S/N CYZ1-UP
PART OF 456-0622 CONTROL AR-AUXILIARY HYDRAULIC
AN ATTACHMENT

i05425503 SEBP4636

For full view, you need register

Parts for your 320D FM EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[24]	STRAP-CABLE
2.	380-0981	[1]	HARNESS AS-CHASSIS
	9X-3401	[1]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[1]	PIN-CONNECTOR (14-GA TO 16-GA)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	8T-8737	[1]	PLUG-SEAL
	243-4505	[1]	RECEPTACLE AS-CONNECTOR (2-PIN)
	9X-3402	[2]	SOCKET-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1768	[2]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	2L-8079	[1]	TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)
3.	130-5300	[1]	CLIP
4.	8T-4121	[1]	WASHER-HARD (11X21X2.5-MM THK)
5.	8T-4191 M	[1]	BOLT (M10X1.5X16-MM)
	M		METRIC PART

#SEBP46360215

428-9400: WIRING GP-CHASSIS

WIRING GP-CHASSIS

428-9400 WIRING GP-CHASSIS
S/N CYZ1-UP
PART OF 456-0622 CONTROL AR-AUXILIARY HYDRAULIC
AN ATTACHMENT

i05425507 SEBP4636

For full view, you need register

Parts for your 320D FM EXCAVATOR:

CATERPILLAR SIS

Part No	Qty	Parts name
428-9401 Y	[1]	HARNESS AS-VALVE

8T-4137 M	[1]	BOLT (M10X1.5X20-MM)
132-5789	[2]	CLIP (LADDER)
7K-1181 B	[17]	STRAP-CABLE
8T-4121	[1]	WASHER-HARD (11X21X2.5-MM THK)
B		USE AS REQUIRED
M		METRIC PART
Y		SEPARATE ILLUSTRATION

#SEBP46360216

267-8007: WIRING GP-COMMUNICATION

WIRING GP-COMMUNICATION

267-8007 WIRING GP-COMMUNICATION -PRODUCT LINK 321SR
S/N CYZ1-UP
PART OF 318-5864 INSTALLATION AR-COMMUNICATION
Type 1
AN ATTACHMENT

i02789464 SEBP4636

2678007 WIRING GP-COMMUNICATION Parts scheme

For full view, you need register

Parts for your 320D FM EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[2]	STRAP-CABLE
2.	4I-7889	[1]	SPACER (11X25X45-MM THK)
3.	7K-1181	[3]	STRAP-CABLE
4.	9X-3495	[1]	CLIP AS
6.	116-0118	[3]	CLIP
7.	259-4887	[1]	HARNESS AS-WIRING (PRODUCT LINK)
8.	259-4940	[1]	HARNESS AS-WIRING (SERVICE CONNECTOR)
9.	275-6979	[1]	HARNESS AS-CONTROL (PRODUCT LINK 121SR)
10.	111-4837	[1]	CLIP
11.	132-5789	[2]	CLIP (LADDER)
12.	8T-4121	[3]	WASHER-HARD (11X21X2.5-MM THK)
13.	8T-4136 CM	[2]	BOLT (M10X1.5X25-MM)
14.	8T-4137 M	[1]	BOLT (M10X1.5X20-MM)
16.	8T-4191 M	[1]	BOLT (M10X1.5X16-MM)
17.	8T-5005 M	[1]	BOLT (M10X1.5X70-MM)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART

#SEBP46360217

267-8007: WIRING GP-COMMUNICATION

WIRING GP-COMMUNICATION

267-8007 WIRING GP-COMMUNICATION -PRODUCT LINK 321SR
S/N CYZ1-UP
PART OF 318-5864 INSTALLATION AR-COMMUNICATION
Type 2
AN ATTACHMENT

i05662562 SEBP4636

For full view, you need register

Parts for your 320D FM EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4I-7889	[1]	SPACER (11X25X45-MM THK)
2.	111-4837	[1]	CLIP
3.	116-0118 C	[1]	CLIP
4.	440-4822 C	[1]	HARNESS AS-CONTROL
	126-1774	[1]	COVER-CONNECTOR
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	9W-0852	[1]	PIN-CONNECTOR (14-GA TO 16-GA)
	9X-3401	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[2]	PIN-CONNECTOR (14-GA TO 16-GA)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	160-7690	[1]	PLUG AS-CONNECTOR (70-PIN)
	159-9322	[1]	SEAL-O-RING
	8T-8737	[62]	PLUG-SEAL
	243-4508	[1]	RECEPTACLE AS-CONNECTOR (6-PIN)
	9X-3402	[20]	SOCKET-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1768	[20]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	3S-2093	[3]	STRAP-CABLE
	2L-8077	[1]	TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM)
5.	132-5789	[2]	CLIP (LADDER)
6.	7K-1181	[3]	STRAP-CABLE
7.	8T-4121	[3]	WASHER-HARD (11X21X2.5-MM THK)
8.	8T-4136 CM	[1]	BOLT (M10X1.5X25-MM)
9.	8T-4137 M	[1]	BOLT (M10X1.5X20-MM)
10.	8T-4191 M	[1]	BOLT (M10X1.5X16-MM)
11.	8T-5005 M	[1]	BOLT (M10X1.5X70-MM)
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP46360218

231-1836: WIRING GP-CONSOLE

WIRING GP-CONSOLE

231-1836 WIRING GP-CONSOLE -LH
S/N CYZ1-235
PART OF 274-7465 CONSOLE GP-OPERATOR, 251-0433 WIRING GP-CONSOLE

i02490120 SEBP4636

For full view, you need register

Parts for your 320D FM EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[2]	STRAP-CABLE
2.	7K-1181	[1]	STRAP-CABLE
3.	163-6795	[2]	STRAP-CABLE
4.	251-0580	[1]	HARNESS AS-CONSOLE
	8T-8729	[4]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[3]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	3S-2093	[9]	STRAP-CABLE
	5P-5995 D		TUBE (0.3-M)
	7Y-3963	[2]	TERMINAL-BULLET (FEMALE)
	7Y-3965	[2]	TUBE (RECEPTACLE TERMINAL)
	8T-8737	[9]	PLUG-SEAL
	9W-0852	[2]	PIN-CONNECTOR (14-GA TO 16-GA)
	9W-0844	[2]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)
	9X-3402	[11]	SOCKET-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1768	[11]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	230-4011	[1]	PLUG AS-CONNECTOR (2-PIN)
	264-7029	[1]	SEAL-CONNECTOR
	230-5010	[1]	PLUG AS-CONNECTOR (6-PIN)
	264-7032	[1]	SEAL-CONNECTOR
	239-7352	[1]	PLUG AS-CONNECTOR (6-PIN)
	264-7032	[1]	SEAL-CONNECTOR
	243-4505	[1]	RECEPTACLE AS-CONNECTOR (2-PIN)
	243-4508	[1]	RECEPTACLE AS-CONNECTOR (6-PIN)
	247-2693	[1]	RECEPTACLE AS-CONNECTOR (6-PIN)
	D		ORDER BY THE METER
	E		ORDER BY THE CENTIMETER

#SEBP46360219

243-4289: WIRING GP-CONSOLE

WIRING GP-CONSOLE

243-4289 WIRING GP-CONSOLE -LH
S/N CYZ1-UP
PART OF 279-5061 WIRING GP-CONSOLE
AN ATTACHMENT

i03006793 SEBP4636

For full view, you need register

Parts for your 320D FM EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7K-1181	[3]	STRAP-CABLE
2.	163-6795	[1]	STRAP-CABLE
3.	251-0580	[1]	HARNESS AS-CONSOLE
	9W-0852	[2]	PIN-CONNECTOR (14-GA TO 16-GA)
	8T-8729	[4]	PIN-CONNECTOR (16-GA TO 18-GA)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	230-4011	[1]	PLUG AS-CONNECTOR (2-PIN)
	264-7029	[1]	SEAL-CONNECTOR
	230-5010	[1]	PLUG AS-CONNECTOR (6-PIN)
	239-7352	[1]	PLUG AS-CONNECTOR (6-PIN)
			(EACH PLUG AS INCLUDES)
	264-7032	[1]	SEAL-CONNECTOR
	8T-8737	[9]	PLUG-SEAL
	243-4505	[1]	RECEPTACLE AS-CONNECTOR (2-PIN)
	243-4508	[1]	RECEPTACLE AS-CONNECTOR (6-PIN)
	247-2693	[1]	RECEPTACLE AS-CONNECTOR (6-PIN)
	9X-3402	[11]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[3]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	9W-0844	[2]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	3S-2093	[9]	STRAP-CABLE
	7Y-3967	[2]	TERMINAL AS
			(EACH INCLUDES)
	7Y-3963	[1]	TERMINAL-BULLET (FEMALE)
	7Y-3965	[1]	TUBE (RECEPTACLE TERMINAL)
	5P-5995 D		TUBE (0.3-M)
	125-7874 D	[1]	TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM)
	125-7875 D		TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)
	D		ORDER BY THE METER

Information:

ELECTRICAL AND STARTING SYSTEM

WIRING GP

Operation and Maintenance Manual

Battery Disconnect Switch
320D Forest Machine

Battery or Battery Cable - Inspect/Replace
320D Forest Machine

Battery - Recycle
320D Forest Machine

Power Receptacle - If Equipped
320D Forest Machine

Battery Disconnect Switch
320D Forest Machines

Fuses - Replace
320D Forest Machine

Power Receptacle - If Equipped
320D Forest Machines

Fuses - Replace
320D Forest Machines

Special Instruction

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}

Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}

Rework Procedure for the Harvester Hydraulic Control Arrangement for Certain 320D FM Excavators{1408, 5051, 5057, 5059, 6320, 7007}
Rework Procedure for the Harvester Hydraulic Control Arrangement for Certain 320D FM Excavators{1408, 5051, 5057, 5059, 6320, 7007}

Procedure for Installing the 373-8980 Console Harness As on Certain Excavators{1408, 5258}
Procedure for Installing the 373-8980 Console Harness As on Certain Excavators{1408, 5258}

DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}

Installation Procedure for Installing an Auxiliary Hydraulic Cooler to Certain 320D Excavators {1374, 1405, 1408, 5057, 7150}
Installation Procedure for Installing an Auxiliary Hydraulic Cooler to Certain 320D Excavators {1374, 1405, 1408, 5057, 7150}

Procedure to Replace the 180-5316 Circulating Fan Gp with 5D-2856 Circulating Fan Gp for Certain Excavators and Track Feller Bunchers {1408, 7301, 7316, 7329}
Procedure to Replace the 180-5316 Circulating Fan Gp with 5D-2856 Circulating Fan Gp for Certain Excavators and Track Feller Bunchers {1408, 7301, 7316, 7329}

Technical Information Bulletin

Circulating Fan Group May Fail on Certain Excavators and Track Feller Bunchers {1408, 7301, 7316}
Circulating Fan Group May Fail on Certain Excavators and Track Feller Bunchers {1408, 7301, 7316}

Tool Operating Manual

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Systems Operation

Switches
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Sensors
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Caterpillar Machines

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Testing and Adjusting

Electric Starting System - Test
C4.2 and C6.4 Engines for Caterpillar Built Machines

Electrical Connector - Inspect
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Wiring Harness (Open Circuit) - Test
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Wiring Harness (Short Circuit) - Test
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

System Schematic
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Overload Warning - Set - If Equipped
320D Forest Machine Hydraulic System

Troubleshooting

MID 039 - CID 0096 - FMI 05
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0096 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0586 - FMI 05
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0586 - FMI 12
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0588 - FMI 09
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1178 - FMI 03
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1178 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1178 - FMI 08
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 2280 - FMI 03
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Electrical Component and Connector Locations
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0110 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0110 - FMI 09
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 2300 - FMI 09
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0600 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Electrical Connectors
C4.2 and C6.4 Engines for Caterpillar Built Machines

Electrical Connectors - Inspect
C4.2 and C6.4 Engines for Caterpillar Built Machines

Disassembly and Assembly

Battery - Remove and Install
320D Forest Machines Engine Supplement

Service Magazine

Inspection Procedure for Switch Panel on Certain Excavators {1408, 7301, 7305, 7306, 7310}
2009/03/09

A New Harness Assembly for the Right Hand Console is Now Available {1408}
2009/06/01

Improvement Made to the Harness in the Right-Hand Side Cab Console for Certain Excavators {1408}
2010/04/22

A New Console Harness Assembly Is Available for Certain Excavators {1408}
2012/11/01

Parts are Now Available to Make Jump Start Receptacle on Cat® Product {1463}
2014/03/04

Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}

Cooling Kit Is Now Used on Certain 320D Excavators {1374, 1405, 1408, 5057}
Cooling Kit Is Now Used on Certain 320D Excavators {1374, 1405, 1408, 5057}