AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

299-3521 CYLINDER HEAD GP Type 1 3512C MARINE ENGINE


BASIC ENGINE
CYLINDER HEAD GP
DAMPER GP
PAN GP-OIL
DRIVE GP-ACCESSORY

MARINE ENGINE 3512C MARINE ENGINE E3W
 3512C Marine Engine E3W00001-UP SEBP4669 3512C E3W   (2008)

BASIC ENGINE

CYLINDER HEAD GP
CYLINDER HEAD AS
290-1351 CYLINDER HEAD AS
CYLINDER HEAD AS
299-3519 CYLINDER HEAD AS
CYLINDER HEAD GP
290-1352 CYLINDER HEAD GP
CYLINDER HEAD GP
299-3521 CYLINDER HEAD GP
CYLINDER HEAD GP
299-3521 CYLINDER HEAD GP
CYLINDER HEAD GP
335-6220 CYLINDER HEAD GP
 

#SEBP46690030
 

299-3521: CYLINDER HEAD GP

299-3521 CYLINDER HEAD GP
Type 1
i02625265 SEBP4669
2993521 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3512C MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5B-7890 B [1] PLUG-PIPE  
2. 204-5426 [4] SEAL (WATER)  
3. 131-0420 [6] FASTENER GP-CYLINDER HEAD  
    (EACH INCLUDES)
  7N-1961 [1] BOLT-12 POINT HEAD (3/4-16X8.5-IN)  
  187-7738 [1] WASHER-HARD (21X36.5X3.5-MM THK)  
4. 131-0421 [2] FASTENER GP-CYLINDER HEAD  
    (EACH INCLUDES)
  7N-1961 [1] BOLT-12 POINT HEAD (3/4-16X8.5-IN)  
  9Y-0635 [1] SPACER (19.35X30.18X45-MM THK)  
  187-7738 [1] WASHER-HARD (21X36.5X3.5-MM THK)  
5. 204-5427 [4] SEAL (WATER)  
6. 5B-0213 [2] BOLT (3/8-16X2.375-IN)  
7. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
8. 110-6991 [1] GASKET-CYLINDER HEAD  
9. 290-1352 Y [1] CYLINDER HEAD GP  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

#SEBP46690031
 

299-3521: CYLINDER HEAD GP

299-3521 CYLINDER HEAD GP
Type 2
i03482081 SEBP4669
2993521 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3512C MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5B-7890 B [1] PLUG-PIPE  
2. 420-0652 [4] SEAL AS-WATER  
3. 131-0420 [6] FASTENER GP-CYLINDER HEAD  
    (EACH INCLUDES)
  7N-1961 [1] BOLT-12 POINT HEAD (3/4-16X8.5-IN)  
  187-7738 [1] WASHER-HARD (21X36.5X3.5-MM THK)  
4. 131-0421 [2] FASTENER GP-CYLINDER HEAD  
    (EACH INCLUDES)
  7N-1961 [1] BOLT-12 POINT HEAD (3/4-16X8.5-IN)  
  9Y-0635 [1] SPACER (19.35X30.18X45-MM THK)  
  187-7738 [1] WASHER-HARD (21X36.5X3.5-MM THK)  
5. 420-0653 [4] SEAL AS-WATER  
6. 5B-0213 [2] BOLT (3/8-16X2.375-IN)  
7. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
8. 110-6991 [1] GASKET-CYLINDER HEAD  
9. 335-6220 CY [1] CYLINDER HEAD GP  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP46690032
 

335-6220: CYLINDER HEAD GP

335-6220 CYLINDER HEAD GP
PART OF 299-3521 CYLINDER HEAD GP, 349-4886 KIT-ENGINE PARTS
ALSO AN ATTACHMENT
i03432503 SEBP4669
3356220 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3512C MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2A-4429 [4] LOCK-RETAINER  
2. 133-9306 [2] GUIDE-VALVE (STANDARD)(INLET)  
  149-1982 AB GUIDE-VALVE (0.508-MM OS)(INLET)  
  273-3553 AB GUIDE-VALVE (0.127-MM OS)(INLET)  
  273-3554 AB GUIDE-VALVE (0.25-MM OS)(INLET)  
  301-9248 AB GUIDE-VALVE (0.38-MM THK)(INLET)  
3. 468-8825 [2] VALVE-EXHAUST  
4. 197-6995 [2] GUIDE-VALVE (STANDARD)(EXHAUST)  
  276-3875 AB GUIDE-VALVE (0.127-MM OS)(EXHAUST)  
  276-3876 AB GUIDE-VALVE (0.25-MM OS)(EXHAUST)  
  320-7710 AB GUIDE-VALVE (0.381-MM OS, EXHAUST)  
  320-7711 AB GUIDE-VALVE (0.508-MM OS, EXHAUST)  
5. 197-7055 [4] LOCK-RETAINER  
6. 468-8824 [2] VALVE-INLET  
7. 290-1351 Y [1] CYLINDER HEAD AS  
8. 316-5976 [4] SPRING (OUTER)  
9. 316-5977 [4] SPRING (INNER)  
10. 316-5978 [2] ROTOCOIL AS (INLET)  
11. 316-5979 [2] ROTOCOIL AS (EXHAUST)  
12. 316-5980 [2] SEAL-VALVE STEM  
13. 316-5981 [2] WASHER (17.8X44.5X3-MM THK)  
   
  449-7113 BF [2] ROTOCOIL AS  
  449-7116 BF [2] SEAL-VALVE STEM  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  F   NOT SHOWN
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP46690033
 

125-9749: DAMPER GP

125-9749 DAMPER GP
AN ATTACHMENT
i01125640 SEBP4669
1259749 DAMPER GP Parts scheme
  For full view, you need register

Parts for your 3512C MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1N-3482 [1] ADAPTER  
2. 171-4571 CY [1] DAMPER GP  
3. 8S-4757 B [6] BOLT (1-14X8-IN)  
4. 5P-8250 B [6] WASHER (28X49X5-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP46690034
 

146-3740: DAMPER GP

146-3740 DAMPER GP
PART OF 8N-0339 DAMPER GP
i01206292 SEBP4669
1463740 DAMPER GP Parts scheme
  For full view, you need register

Parts for your 3512C MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 151-9263 [2] WASHER (10.35X16X2-MM THK)  
2. 227-3801 [2] PLUG  
3. 1A-2029 [48] BOLT (3/8-16X1.125-IN)  
4. 3V-2431 [48] WASHER (10.2X16X2-MM THK)  
5. 4D-0449 [1] SEAL-O-RING  
6. 6V-7991 [1] SEAL-O-RING  
   
    AVAILABLE REPAIR KIT(S):
  420-8780 [1] KIT-DAMPER  
    (INCLUDES 48 SCREWS, 48 WASHERS, 2 PLUGS, 2 O-RINGS, 2 BEARINGS & 2 SEALING WASHERS)
  420-8781 [1] KIT-DAMPER  
    (INCLUDES 2 SEALING WASHERS & 2 PLUGS)
  437-9760 [1] KIT-DAMPER  
    (INCLUDES SILICONE)
  441-4878 [1] KIT-DAMPER  
    (INCLUDES EMPTY CARTRIDGE)
 

#SEBP46690035
 

171-4571: DAMPER GP

171-4571 DAMPER GP
PART OF 125-9749 DAMPER GP, 7W-0284 MOUNTING GP-HYD PUMP DRIVE
AN ATTACHMENT
i01102983 SEBP4669
1714571 DAMPER GP Parts scheme
  For full view, you need register

Parts for your 3512C MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 151-9263 [2] WASHER (10.35X16X2-MM THK)  
2. 227-3801 [2] PLUG  
3. 1A-2029 [48] BOLT (3/8-16X1.125-IN)  
4. 3V-2431 [48] WASHER (10.2X16X2-MM THK)  
5. 4D-0449 [1] SEAL-O-RING  
6. 6V-7991 [1] SEAL-O-RING  
   
    AVAILABLE REPAIR KIT(S):
  420-8780 [1] KIT-DAMPER  
    (INCLUDES SCREWS, WASHERS, PLUGS, SEALS, BEARING ELEMENTS & SEALING WASHERS)
  420-8781 [1] KIT-DAMPER  
    (INCLUDES WASHERS & PLUGS)
  437-9760 [1] KIT-DAMPER  
    (INCLUDES CARTRIDGE FILLED WITH SILICONE FLUID)
  441-4878 [1] KIT-DAMPER  
    (INCLUDES EMPTY CARTRIDGE)
 

#SEBP46690036
 

8N-0339: DAMPER GP

8N-0339 DAMPER GP
i01206164 SEBP4669
8N0339 DAMPER GP Parts scheme
  For full view, you need register

Parts for your 3512C MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1N-3482 [1] ADAPTER  
2. 146-3740 CY [1] DAMPER GP  
3. 8S-4757 [6] BOLT (1-14X8-IN)  
4. 5P-8250 [6] WASHER (28X49X5-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP46690037
 

9Y-7876: DRAIN GP-ENGINE OIL

9Y-7876 DRAIN GP-ENGINE OIL -PAN
AN ATTACHMENT
i00432576 SEBP4669
9Y7876 DRAIN GP-ENGINE OIL Parts scheme
  For full view, you need register

Parts for your 3512C MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6F-4868 [1] GASKET  
2. 7N-6511 [1] ADAPTER  
3. 1F-6660 [1] NIPPLE-PIPE  
4. 9B-4202 [1] VALVE-DRAIN (ENGINE OIL)  
5. 7X-7731 B [1] PLUG-PIPE (3/4-14-THD)  
  B   USE AS REQUIRED
 

#SEBP46690038
 

107-7361: DRIVE GP-ACCESSORY

107-7361 DRIVE GP-ACCESSORY -UPPER, RH
S/N E3W1-368
STANDARD ROTATION
CANNOT BE USED WITH MECHANICAL GOVERNOR
AN ATTACHMENT
i00094531 SEBP4669
1077361 DRIVE GP-ACCESSORY Parts scheme
  For full view, you need register

Parts for your 3512C MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7C-4165 [1] ADAPTER AS  
1A. 127-5400 [1] BUSHING  
2. 0L-1351 [10] BOLT (3/8-16X0.875-IN)  
3. 6V-3348 [1] SEAL-O-RING  
4. 8T-6757 [1] PLUG-PIPE  
5. 8T-6759 [1] PLUG-PIPE  
6. 5P-0840 [1] SEAL-O-RING  
7. 259-4598 [1] SEAL-O-RING  
8. 107-0466 [1] GEAR-ACCESSORY DRIVE (55-TEETH)  
9. 235-3546 [1] SEAL-O-RING  
10. 107-7362 [1] COVER AS  
10A. 2S-7056 [1] BUSHING  
 

#SEBP46690039
 

107-7361: DRIVE GP-ACCESSORY

107-7361 DRIVE GP-ACCESSORY -UPPER, RH
S/N E3W369-UP
STANDARD ROTATION
CANNOT BE USED WITH MECHANICAL GOVERNOR
AN ATTACHMENT
i05800305 SEBP4669
1077361 DRIVE GP-ACCESSORY Parts scheme
  For full view, you need register

Parts for your 3512C MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7C-4165 [1] ADAPTER AS  
1A. 127-5400 [1] BUSHING  
2. 7N-7539 C [2] WASHER-THRUST  
3. 7N-8374 [1] COVER-PUMP  
4. 235-3546 [1] SEAL-O-RING  
5. 492-1584 C [1] GEAR-ACCESSORY DRIVE  
6. 364-6393 C [1] COVER AS  
6A. 127-5400 [1] BUSHING  
7. 0L-1351 C [4] BOLT (3/8-16X0.875-IN)  
8. 0S-1592 [2] BOLT (5/8-11X1.25-IN)  
9. 3B-1915 C [6] BOLT (3/8-16X1.375-IN)  
10. 259-4598 [1] SEAL-O-RING  
11. 2B-2695 C [4] BOLT (5/16-18X0.875-IN)  
12. 5P-0840 [1] SEAL-O-RING  
13. 5P-8247 [2] WASHER-HARD (17X32X3.5-MM THK)  
14. 6V-3348 [1] SEAL-O-RING  
15. 8T-6757 [2] PLUG-PIPE  
16. 8T-6759 [1] PLUG-PIPE  
17. 9M-1974 C [4] WASHER-HARD (8.8X16X2-MM THK)  
18. 9X-7371 [1] SEAL-O-RING  
19. 5M-2894 [6] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
 

Information:

Engine News
New Water Seals Provide Increased Stability At Higher Temperatures {1100, 1124}
2010/10/06
Improved Valve Components Are Used {1100, 1108}
2008/12/22
New O-Rings Are Used with the Plugs for the Fuel Passages in 3500 Engines {1100, 1101, 1252, 1254}
2010/09/14
New Exhaust Valves Are Used in Diesel 3500 Commercial Engines {1100, 1105}
2013/12/10
Cat<SUP>&reg;</SUP> Reman Announces the Availability of Remanufactured Cylinder Heads for 3500 and G3500 Engines {1100}
2015/06/26
A New Cylinder Liner Insert Is Now Used On Certain 3500 Engines {1201, 1217}
A New Cylinder Liner Insert Is Now Used On Certain 3500 Engines {1201, 1217}
Special Instruction
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Testing for Excessive Cylinder Blowby in 3500 Engines{1000, 1100, 1223}
Testing for Excessive Cylinder Blowby in 3500 Engines{1000, 1100, 1223}
New Cylinder Head and Head Gasket Leak Test Procedure Available for 3500 Engines {1100, 1223}
New Cylinder Head and Head Gasket Leak Test Procedure Available for 3500 Engines {1100, 1223}
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING THE CYLINDER HEAD LIFTING EYE BOLT HOLE ON VARIOUS 3508, 3512, AND 3516 ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING THE CYLINDER HEAD LIFTING EYE BOLT HOLE ON VARIOUS 3508, 3512, AND 3516 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING CYLINDER HEADS OR VALVE SPRINGS, KEEPERS, AND ROTATORS ON CERTAIN 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, AND 3516C MARINE ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING CYLINDER HEADS OR VALVE SPRINGS, KEEPERS, AND ROTATORS ON CERTAIN 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, AND 3516C MARINE ENGINES
Service Letter-Australia
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING THE CYLINDER HEAD LIFTING EYE BOLT HOLE ON VARIOUS 3508, 3512, AND 3516 ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING THE CYLINDER HEAD LIFTING EYE BOLT HOLE ON VARIOUS 3508, 3512, AND 3516 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING CYLINDER HEADS OR VALVE SPRINGS, KEEPERS, AND ROTATORS ON CERTAIN 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, AND 3516C MARINE ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING CYLINDER HEADS OR VALVE SPRINGS, KEEPERS, AND ROTATORS ON CERTAIN 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, AND 3516C MARINE ENGINES
Service Letter-CFEL
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING THE CYLINDER HEAD LIFTING EYE BOLT HOLE ON VARIOUS 3508, 3512, AND 3516 ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING THE CYLINDER HEAD LIFTING EYE BOLT HOLE ON VARIOUS 3508, 3512, AND 3516 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING CYLINDER HEADS OR VALVE SPRINGS, KEEPERS, AND ROTATORS ON CERTAIN 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, AND 3516C MARINE ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING CYLINDER HEADS OR VALVE SPRINGS, KEEPERS, AND ROTATORS ON CERTAIN 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, AND 3516C MARINE ENGINES
Service Letter-CSARL
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING THE CYLINDER HEAD LIFTING EYE BOLT HOLE ON VARIOUS 3508, 3512, AND 3516 ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING THE CYLINDER HEAD LIFTING EYE BOLT HOLE ON VARIOUS 3508, 3512, AND 3516 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING CYLINDER HEADS OR VALVE SPRINGS, KEEPERS, AND ROTATORS ON CERTAIN 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, AND 3516C MARINE ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING CYLINDER HEADS OR VALVE SPRINGS, KEEPERS, AND ROTATORS ON CERTAIN 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, AND 3516C MARINE ENGINES
Service Letter-Americas
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING THE CYLINDER HEAD LIFTING EYE BOLT HOLE ON VARIOUS 3508, 3512, AND 3516 ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING THE CYLINDER HEAD LIFTING EYE BOLT HOLE ON VARIOUS 3508, 3512, AND 3516 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING CYLINDER HEADS OR VALVE SPRINGS, KEEPERS, AND ROTATORS ON CERTAIN 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, AND 3516C MARINE ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING CYLINDER HEADS OR VALVE SPRINGS, KEEPERS, AND ROTATORS ON CERTAIN 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, AND 3516C MARINE ENGINES
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
Possible Coolant Leaks in Certain 3500 Cylinder Heads{1100, 1395}
Possible Coolant Leaks in Certain 3500 Cylinder Heads{1100, 1395}
Broken Bolt Survey for all 3500 Engines{1100, 7553}
Broken Bolt Survey for all 3500 Engines{1100, 7553}
Specifications
Cylinder Head
3500C Marine Engines
Cylinder Head
3500C Marine Engines
Cylinder Head Valves
3500C Marine Engines
Tool Operating Manual
421-1011 Valve Recession Tool Group used on G3500 C, E, &amp; H Engines{0374, 0599, 0701, 0703, 1100}
421-1011 Valve Recession Tool Group used on G3500 C, E, & H Engines{0374, 0599, 0701, 0703, 1100}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
Service Letter-China
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING THE CYLINDER HEAD LIFTING EYE BOLT HOLE ON VARIOUS 3508, 3512, AND 3516 ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING THE CYLINDER HEAD LIFTING EYE BOLT HOLE ON VARIOUS 3508, 3512, AND 3516 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING CYLINDER HEADS OR VALVE SPRINGS, KEEPERS, AND ROTATORS ON CERTAIN 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, AND 3516C MARINE ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING CYLINDER HEADS OR VALVE SPRINGS, KEEPERS, AND ROTATORS ON CERTAIN 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, AND 3516C MARINE ENGINES
Service Letter-Asia
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING THE CYLINDER HEAD LIFTING EYE BOLT HOLE ON VARIOUS 3508, 3512, AND 3516 ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING THE CYLINDER HEAD LIFTING EYE BOLT HOLE ON VARIOUS 3508, 3512, AND 3516 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING CYLINDER HEADS OR VALVE SPRINGS, KEEPERS, AND ROTATORS ON CERTAIN 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, AND 3516C MARINE ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING CYLINDER HEADS OR VALVE SPRINGS, KEEPERS, AND ROTATORS ON CERTAIN 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, AND 3516C MARINE ENGINES
Systems Operation
Cylinder Block, Liners and Heads
3500 Marine Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Letter-APD
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING THE CYLINDER HEAD LIFTING EYE BOLT HOLE ON VARIOUS 3508, 3512, AND 3516 ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING THE CYLINDER HEAD LIFTING EYE BOLT HOLE ON VARIOUS 3508, 3512, AND 3516 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING CYLINDER HEADS OR VALVE SPRINGS, KEEPERS, AND ROTATORS ON CERTAIN 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, AND 3516C MARINE ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING CYLINDER HEADS OR VALVE SPRINGS, KEEPERS, AND ROTATORS ON CERTAIN 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, AND 3516C MARINE ENGINES
Testing and Adjusting
Valve Lash and Valve Bridge Adjustment
3500 Marine Engines
Cylinder Head
3500 Marine Engines
Disassembly and Assembly
Rocker Shaft and Pushrod - Remove
3508C, 3512C and 3516C Marine Engines
Inlet and Exhaust Valves - Remove and Install
3508C, 3512C and 3516C Marine Engines
Inlet and Exhaust Valve Springs - Remove and Install
3508C, 3512C and 3516C Marine Engines
Inlet and Exhaust Valve Seat Inserts - Remove and Install
3508C, 3512C and 3516C Marine Engines
Inlet and Exhaust Valve Guides - Remove and Install
3508C, 3512C and 3516C Marine Engines
Cylinder Head - Remove
3508C, 3512C and 3516C Marine Engines
Cylinder Head - Install
3508C, 3512C and 3516C Marine Engines

Caterpillar Parts SIS Catalog 3512C :

CYLINDER HEAD GP
290-1352 CYLINDER HEAD GP
CYLINDER HEAD AS
299-3519 CYLINDER HEAD AS
CYLINDER HEAD AS
290-1351 CYLINDER HEAD AS
CYLINDER BLOCK GP
353-3970 CYLINDER BLOCK GP
CYLINDER BLOCK GP
240-6651 CYLINDER BLOCK GP
CYLINDER BLOCK GP
240-6651 CYLINDER BLOCK GP
CYLINDER BLOCK GP
115-5154 CYLINDER BLOCK GP
CYLINDER BLOCK AS
525-1801 CYLINDER BLOCK AS
CYLINDER HEAD GP
299-3521 CYLINDER HEAD GP
CYLINDER HEAD GP
335-6220 CYLINDER HEAD GP
DAMPER GP
125-9749 DAMPER GP
DAMPER GP
146-3740 DAMPER GP
DAMPER GP
171-4571 DAMPER GP
DAMPER GP
8N-0339 DAMPER GP
DRAIN GP-ENGINE OIL
9Y-7876 DRAIN GP-ENGINE OIL
DRIVE GP-ACCESSORY
107-7361 DRIVE GP-ACCESSORY
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.