POWER TRAIN
CONTROL GP-TRANSMISSION HYDCOOLER GP
COVER GP-SHIPPING
FILLER GP-POWER TRAIN OIL
DIFFERENTIAL & BEVEL GEAR GP
POWER TRAIN
CONTROL GP-TRANSMISSION HYD
#SEBP46710380
252-9720: CONTROL GP-TRANSMISSION HYD
252-9720 CONTROL GP-TRANSMISSION HYD
S/N HCZ1122-UP
PART OF 252-5135 TRANSMISSION AR
S/N HCZ1122-UP
PART OF 252-5135 TRANSMISSION AR
For full view, you need register
Parts for your 938H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 C | [9] | STRAP-CABLE | |
| 2. | 9L-9068 | [2] | DOWEL | |
| 3. | 7K-1181 C | [1] | STRAP-CABLE | |
| 4. | 196-1185 Y | [1] | SENSOR GP-SPEED (TORQUE CONVERTER OUTPUT) | |
| 4A. | 196-1185 Y | [1] | SENSOR GP-SPEED (TRANSMISSION OUTPUT 1) | |
| 4B. | 196-1185 Y | [1] | SENSOR GP-SPEED (TRANSMISSION OUTPUT 2) | |
| 5. | 201-3321 | [1] | SEAL-O-RING | |
| 6. | 344-7928 C | [1] | HARNESS AS-TRANSMISSION | |
| 8T-8731 | [1] | PLUG-CONNECTOR (3-PIN) | ||
| 8T-8737 | [11] | PLUG-SEAL | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 114-8843 E | SLEEVE-PLASTIC (240-CM) | |||
| 114-8845 E | SLEEVE-PLASTIC (20-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM) | |||
| 9X-3401 | [26] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [26] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3402 | [23] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [23] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2270 | [10] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 225-3854 | [1] | PLUG AS-CONNECTOR (31-PIN) | ||
| 7. | 130-5300 C | [4] | CLIP | |
| 8. | 132-5789 | [10] | CLIP (LADDER) | |
| 9. | 266-2470 Y | [1] | VALVE GP-TRANSMISSION CONTROL | |
| 10. | 3K-0360 C | [3] | SEAL-O-RING | |
| 11. | 6V-2317 M | [5] | BOLT (M8X1.25X30-MM) | |
| 12. | 6V-3821 M | [1] | BOLT (M8X1.25X110-MM) | |
| 13. | 6V-5215 M | [6] | BOLT (M8X1.25X16-MM) | |
| 14. | 6V-5223 M | [10] | BOLT (M8X1.25X100-MM) | |
| 15. | 8M-5251 | [8] | SEAL-O-RING | |
| 16. | 8T-0276 M | [4] | BOLT (M8X1.25X45-MM) | |
| 17. | 9M-1974 | [26] | WASHER-HARD (8.8X16X2-MM THK) | |
| 18. | 8M-2773 C | [1] | CLIP (LOOP) | |
| 19. | 033-8248 | [1] | CLIP (LOOP) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP46710381
265-9745: COOLER AR-AXLE OIL
265-9745 COOLER AR-AXLE OIL -MANUAL DIFFERENTIAL LOCK, FRONT
S/N MJC1-UP
CANNOT BE USED WITH @@@@@283-5233@@@@@
AN ATTACHMENT
S/N MJC1-UP
CANNOT BE USED WITH @@@@@283-5233@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your 938H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 295-8332 Y | [1] | GUARD GP-LINES (AXLE OIL COOLER) | ||
| 260-8837 Y | [1] | GUARD GP-POWER TRAIN (AXLE OIL COOLER) | ||
| 266-1688 Y | [1] | HARDWARE GP-REAR FRAME | ||
| 260-8823 Y | [1] | LINES GP-AXLE OIL COOLER | ||
| 270-3318 Y | [1] | LINES GP-WATER (AXLE OIL COOLER, CAB HEATER) | ||
| 296-8069 Y | [1] | MOUNTING GP-AXLE OIL COOLER | ||
| 263-1860 Y | [1] | PUMP & MTG GP-AXLE OIL COOLER | ||
| 267-4794 Y | [1] | WIRING GP-AXLE OIL COOLER | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP46710382
304-7268: COOLER AR-AXLE OIL
304-7268 COOLER AR-AXLE OIL
S/N MJC1-UP
CANNOT BE USED WITH @@@@@265-9745@@@@@, @@@@@283-5233@@@@@, @@@@@258-4543@@@@@
AN ATTACHMENT
S/N MJC1-UP
CANNOT BE USED WITH @@@@@265-9745@@@@@, @@@@@283-5233@@@@@, @@@@@258-4543@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your 938H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 295-8332 Y | [1] | GUARD GP-LINES (AXLE OIL COOLER) | ||
| 260-8837 Y | [1] | GUARD GP-POWER TRAIN (AXLE OIL COOLER) | ||
| 266-1688 Y | [1] | HARDWARE GP-REAR FRAME | ||
| 260-8823 Y | [1] | LINES GP-AXLE OIL COOLER | ||
| 297-8256 Y | [1] | LINES GP-WATER (AXLE OIL COOLER) | ||
| 296-8069 Y | [1] | MOUNTING GP-AXLE OIL COOLER | ||
| 263-1860 Y | [1] | PUMP & MTG GP-AXLE OIL COOLER | ||
| 267-4794 Y | [1] | WIRING GP-AXLE OIL COOLER | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP46710383
255-4814: COOLER GP-TRANSMISSION OIL
255-4814 COOLER GP-TRANSMISSION OIL
S/N MJC1-UP
PART OF 237-7540 CHASSIS AR
S/N MJC1-UP
PART OF 237-7540 CHASSIS AR
For full view, you need register
Parts for your 938H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5D-1026 | [1] | CLAMP-BAND | |
| 2. | 165-2273 | [1] | VALVE AS-SHUTOFF (COOLANT) | |
| 3K-0360 | [1] | SEAL-O-RING | ||
| 6V-7238 | [1] | VALVE-SHUTOFF | ||
| 3. | 329-2594 | [1] | COOLER AS-TRANSMISSION OIL | |
| 7J-5544 | [1] | FITTING (3/4X16-THD) | ||
| 8T-3490 M | [6] | NUT-WELD (M10X1.5-THD) | ||
| 4. | 5P-0767 E | HOSE (18-CM) | ||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP46710384
266-0750: COVER GP-SHIPPING
For full view, you need register
Parts for your 938H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 174-5386 | [1] | COVER-SHIPPING | |
| 2. | 6V-7981 M | [6] | BOLT (M10X1.5X70-MM) | |
| 3. | 8T-4121 | [6] | WASHER-HARD (11X21X2.5-MM THK) | |
| 4. | 8T-4133 M | [6] | NUT (M10X1.5-THD) | |
| 5. | 7J-3554 | [4] | COVER | |
| 6. | 2D-0094 | [4] | GASKET | |
| 8. | 6V-6317 M | [10] | BOLT (M10X1.5X20-MM) | |
| 9. | 4S-5971 | [1] | COVER | |
| 10. | 7F-8268 | [1] | SEAL-O-RING | |
| M | METRIC PART | |||
#SEBP46710385
7K-5636: COVER GP-XMSN OIL FILLER CAP
7K-5636 COVER GP-XMSN OIL FILLER CAP
S/N MJC1-UP
PART OF 258-8765 LOCK GP-VANDALISM
S/N MJC1-UP
PART OF 258-8765 LOCK GP-VANDALISM
For full view, you need register
#SEBP46710386
271-8710: DIFFERENTIAL & BEVEL GEAR GP
271-8710 DIFFERENTIAL & BEVEL GEAR GP -OSCILLATING AXLE, LOCKING DIFFERENTIAL
S/N MJC1-UP
PART OF 272-4996 AXLE AR-OSCILLATING
AN ATTACHMENT
S/N MJC1-UP
PART OF 272-4996 AXLE AR-OSCILLATING
AN ATTACHMENT
For full view, you need register
Parts for your 938H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 240-2020 | [1] | RACE-BEARING | |
| 2. | 5L-2030 | [1] | CONE-BEARING | |
| 3. | 5L-2031 | [1] | CUP-BEARING | |
| 4. | 7S-4001 | [1] | SEAL-O-RING | |
| 5. | 201-8481 | [1] | LOCKNUT AS | |
| 314-3260 | [4] | BOLT-LOCKING (M8X1.25X18-MM) | ||
| 6. | 239-5231 | [1] | BEARING AS-DIFFERENTIAL | |
| 7. | 240-3657 | [1] | SHIM (4-MM THK) | |
| 8. | 240-3658 | [1] | SHIM (2.65-MM THK) | |
| 9. | 240-3659 | [1] | SHROUD | |
| 10. | 270-7241 | [1] | SEAL-LIP TYPE | |
| 11. | 271-8517 | [1] | HOUSING-PINION | |
| 12. | 271-8521 | [1] | YOKE AS | |
| 271-8720 | [1] | GUARD (DIRT) | ||
| 13. | 271-8528 | [1] | SHIM PACK (INCLUDES 18-SHIMS) | |
| 14. | 271-8529 | [1] | RETAINER | |
| 15. | 271-9095 | [1] | BEARING AS | |
| 16. | 279-4345 | [1] | BEARING AS | |
| 17. | 289-8604 Y | [1] | DIFFERENTIAL GP (LOCKING) | |
| 18. | 290-7296 M | [20] | BOLT (M16X2X40-MM) | |
| 19. | 311-4759 | [1] | SET-BEVEL GEAR | |
| 20. | 159-3046 M | [3] | BOLT (M8X1.25X20-MM) | |
| 21. | 2K-2939 | [1] | SEAL-O-RING | |
| 22. | 6V-5686 M | [12] | BOLT (M16X2X50-MM) | |
| 23. | 8C-3979 | [1] | RING-RETAINING | |
| 24. | 286-9155 M | [1] | BOLT-SELF-LOCKING (M16X2X120-MM) | |
| 25. | 9X-8268 | [32] | WASHER (17.5X30X3.5-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP46710387
271-8711: DIFFERENTIAL & BEVEL GEAR GP
271-8711 DIFFERENTIAL & BEVEL GEAR GP -FIXED AXLE, LOCKING DIFFERENTIAL
S/N MJC1-UP
PART OF 272-4990, 272-4992 AXLE AR-FIXED
AN ATTACHMENT
S/N MJC1-UP
PART OF 272-4990, 272-4992 AXLE AR-FIXED
AN ATTACHMENT
For full view, you need register
Parts for your 938H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 240-2020 | [1] | RACE-BEARING | |
| 2. | 5L-2030 | [1] | CONE-BEARING | |
| 3. | 5L-2031 | [1] | CUP-BEARING | |
| 4. | 7S-4001 | [1] | SEAL-O-RING | |
| 5. | 201-8481 | [1] | LOCKNUT AS | |
| 5A. | 314-3260 | [4] | BOLT-LOCKING (M8X1.25X18-MM) | |
| 6. | 239-5231 | [1] | BEARING AS-DIFFERENTIAL | |
| 7. | 240-3657 | [1] | SHIM (4-MM THK) | |
| 8. | 240-3658 | [1] | SHIM (2.65-MM THK) | |
| 9. | 240-3659 | [1] | SHROUD | |
| 10. | 270-7241 | [1] | SEAL-LIP TYPE | |
| 11. | 271-8522 | [1] | YOKE AS | |
| 11A. | 271-8720 | [1] | GUARD (DIRT) | |
| 12. | 271-8528 B | [1] | SHIM PACK (INCLUDES 18-SHIMS) | |
| 13. | 271-8529 | [1] | RETAINER | |
| 14. | 271-9095 | [1] | BEARING AS | |
| 15. | 272-5609 | [1] | HOUSING-PINION | |
| 16. | 279-4345 | [1] | BEARING AS | |
| 17. | 289-8604 Y | [1] | DIFFERENTIAL GP (LOCKING) | |
| 18. | 290-7296 M | [20] | BOLT (M16X2X40-MM) | |
| 19. | 311-4759 | [1] | SET-BEVEL GEAR | |
| 20. | 159-3046 M | [3] | BOLT (M8X1.25X20-MM) | |
| 21. | 2K-2939 | [1] | SEAL-O-RING | |
| 22. | 6V-5686 M | [8] | BOLT (M16X2X50-MM) | |
| 23. | 8C-3979 | [1] | RING-RETAINING | |
| 24. | 286-9155 M | [1] | BOLT-SELF-LOCKING (M16X2X120-MM) | |
| 25. | 9X-8268 | [28] | WASHER (17.5X30X3.5-MM THK) | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP46710388
271-8713: DIFFERENTIAL & BEVEL GEAR GP
271-8713 DIFFERENTIAL & BEVEL GEAR GP -OSCILLATING AXLE, OPEN DIFFERENTIAL
S/N MJC1-UP
PART OF 271-2344 AXLE AR-OSCILLATING
AN ATTACHMENT
S/N MJC1-UP
PART OF 271-2344 AXLE AR-OSCILLATING
AN ATTACHMENT
For full view, you need register
Parts for your 938H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 240-2020 | [1] | RACE-BEARING | |
| 2. | 5L-2030 | [1] | CONE-BEARING | |
| 3. | 5L-2031 | [1] | CUP-BEARING | |
| 4. | 7S-4001 | [1] | SEAL-O-RING | |
| 5. | 201-8481 | [1] | LOCKNUT AS | |
| 5A. | 314-3260 | [4] | BOLT-LOCKING (M8X1.25X18-MM) | |
| 6. | 239-5231 | [1] | BEARING AS-DIFFERENTIAL | |
| 7. | 240-3657 | [1] | SHIM (4-MM THK) | |
| 8. | 240-3658 | [1] | SHIM (2.65-MM THK) | |
| 9. | 240-3659 | [1] | SHROUD | |
| 10. | 270-7241 | [1] | SEAL-LIP TYPE | |
| 11. | 271-8517 | [1] | HOUSING-PINION | |
| 12. | 271-8521 | [1] | YOKE AS | |
| 12A. | 271-8720 | [1] | GUARD (DIRT) | |
| 13. | 271-8528 B | [1] | SHIM PACK (INCLUDES 18-SHIMS) | |
| 14. | 271-8529 | [1] | RETAINER | |
| 15. | 271-9095 | [1] | BEARING AS | |
| 16. | Y | [1] | DIFFERENTIAL GP (OPEN) | |
| 17. | 290-7296 M | [20] | BOLT (M16X2X40-MM) | |
| 18. | 311-4759 | [1] | SET-BEVEL GEAR | |
| 19. | 159-3046 M | [3] | BOLT (M8X1.25X20-MM) | |
| 20. | 2K-2939 | [1] | SEAL-O-RING | |
| 21. | 6V-5686 M | [12] | BOLT (M16X2X50-MM) | |
| 22. | 8C-3979 | [1] | RING-RETAINING | |
| 23. | 286-9155 M | [1] | BOLT-SELF-LOCKING (M16X2X120-MM) | |
| 24. | 9X-8268 | [32] | WASHER (17.5X30X3.5-MM THK) | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP46710389
289-8602: DIFFERENTIAL GP
289-8602 DIFFERENTIAL GP -OPEN
S/N MJC1-UP
PART OF 271-8713 DIFFERENTIAL & BEVEL GEAR GP
AN ATTACHMENT
S/N MJC1-UP
PART OF 271-8713 DIFFERENTIAL & BEVEL GEAR GP
AN ATTACHMENT
For full view, you need register
Parts for your 938H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 138-1511 | [4] | PINION | |
| 2. | 138-3642 | [2] | GEAR-DIFFERENTIAL (16-TEETH) | |
| 3. | 188-2467 | [4] | BUSHING | |
| 4. | 289-8601 | [1] | CASE AS-DIFFERENTIAL | |
| 4A. | 5P-8245 | [12] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 4B. | 8T-0106 M | [12] | BOLT (M12X1.75X100-MM) | |
| 5. | 288-1025 | [1] | SPIDER | |
| 6. | 305-3337 | [2] | WASHER-THRUST | |
| 7. | 305-3339 | [4] | WASHER-THRUST | |
| M | METRIC PART | |||
Information:
Caterpillar Parts SIS Catalog 938H :
Truck sale:
94,734