ELECTRICAL AND STARTING SYSTEM
WIRING GPPOWER TRAIN
ACCUMULATOR GPAXLE GP
ELECTRICAL AND STARTING SYSTEM
WIRING GP
#SEBP46720320
265-5828: WIRING GP-SENSOR
265-5828 WIRING GP-SENSOR
S/N LKM1-UP
PART OF 330-5954 INSTALLATION AR-COMMUNICATION
AN ATTACHMENT
S/N LKM1-UP
PART OF 330-5954 INSTALLATION AR-COMMUNICATION
AN ATTACHMENT
For full view, you need register
Parts for your 938H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3D-8752 | [1] | LOCKNUT (5/16-24-THD) | |
| 2. | 5P-9683 | [1] | ROD END | |
| 3. | 7I-3236 | [1] | SUPPORT AS | |
| 4. | 8C-5607 | [6] | MOUNT-ISOLATION | |
| 5. | 8C-5608 | [3] | SPACER (6.5X9.5X25.4-MM THK) | |
| 6. | 8K-1253 | [1] | ROD END | |
| 7. | 129-6791 | [1] | ROD | |
| 8. | 129-6792 | [1] | ARM-BAIL | |
| 9. | 266-1484 CY | [1] | SENSOR GP-POSITION (ROTARY)(TILT) | |
| 10. | 166-2232 | [1] | SEAL-LIP TYPE | |
| 11. | 168-0402 | [1] | HOUSING | |
| 12. | 168-8774 | [1] | SHAFT | |
| 13. | 2H-3429 | [1] | RING-RETAINING | |
| 14. | 2L-6726 | [2] | RING-RETAINING | |
| 15. | 8T-0328 C | [2] | WASHER-HARD (5.5X10X1-MM THK) | |
| 16. | 4E-7088 | [1] | LEVER | |
| 17. | 5C-2890 M | [3] | NUT (M6X1-THD) | |
| 18. | 6D-3025 | [2] | BALL BEARING | |
| 19. | 6V-0894 | [1] | SEAL-O-RING | |
| 20. | 6V-2313 M | [2] | BOLT (M5X0.8X30-MM) | |
| 21. | 6V-8186 | [1] | NUT-FULL (5/16-24-THD) | |
| 22. | 8L-4496 | [1] | NUT-JAM (5/16-24 LH-THD) | |
| 23. | 8T-2561 | [2] | WASHER-HARD (10.5X28.5X5-MM THK) | |
| 24. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 25. | 8T-4186 M | [2] | BOLT (M10X1.5X40-MM) | |
| 26. | 8T-4195 M | [1] | BOLT (M10X1.5X30-MM) | |
| 27. | 8T-4223 | [3] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 28. | 8T-4224 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 29. | 8T-4244 M | [3] | NUT (M12X1.75-THD) | |
| 30. | 9X-2480 M | [3] | BOLT (M6X1X45-MM) | |
| 31. | 9X-6165 | [6] | WASHER (6.5X22X2.5-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP46720321
267-4799: WIRING GP-SENSOR
267-4799 WIRING GP-SENSOR -WHEEL SPEED
S/N LKM1-1369
PART OF 265-9753 CONTROL AR-DIFFERENTIAL LOCK
AN ATTACHMENT
S/N LKM1-1369
PART OF 265-9753 CONTROL AR-DIFFERENTIAL LOCK
AN ATTACHMENT
For full view, you need register
Parts for your 938H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7K-1181 | [11] | STRAP-CABLE | |
| 2. | 116-0118 | [4] | CLIP | |
| 3. | 264-0148 Y | [4] | SENSOR GP-SPEED (WHEEL) | |
| 4. | 300-6444 | [1] | HARNESS AS-SENSOR (FRONT AXLE) | |
| 5. | 300-6446 | [1] | HARNESS AS-SENSOR (AXLE, REAR) | |
| 6. | 303-1226 | [1] | BRACKET AS | |
| 7. | 303-1227 | [1] | BRACKET AS | |
| 8. | 303-1228 | [1] | BRACKET AS | |
| 9. | 303-1229 | [1] | BRACKET AS | |
| 10. | 303-1230 | [1] | BRACKET AS | |
| 11. | 5P-9297 | [2] | CLIP | |
| 12. | 8T-0267 M | [8] | BOLT-SOCKET HEAD (M6X1X12-MM) | |
| 13. | 8T-4121 | [27] | WASHER-HARD (11X21X2.5-MM THK) | |
| 14. | 8T-4133 M | [4] | NUT (M10X1.5-THD) | |
| 15. | 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | |
| 16. | 8T-4137 M | [17] | BOLT (M10X1.5X20-MM) | |
| 17. | 8T-4192 M | [9] | BOLT (M12X1.75X25-MM) | |
| 18. | 8T-4195 M | [4] | BOLT (M10X1.5X30-MM) | |
| 19. | 8T-4223 | [9] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 20. | 9X-8250 | [17] | CLIP | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP46720322
267-4799: WIRING GP-SENSOR
267-4799 WIRING GP-SENSOR -WHEEL SPEED
S/N LKM1370-UP
PART OF 265-9753 CONTROL AR-DIFFERENTIAL LOCK
AN ATTACHMENT
S/N LKM1370-UP
PART OF 265-9753 CONTROL AR-DIFFERENTIAL LOCK
AN ATTACHMENT
For full view, you need register
Parts for your 938H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7K-1181 C | [10] | STRAP-CABLE | |
| 2. | 116-0118 | [4] | CLIP | |
| 3. | 264-0148 Y | [4] | SENSOR GP-SPEED (WHEEL) | |
| 4. | 300-6444 | [1] | HARNESS AS-SENSOR (FRONT AXLE) | |
| 5P-0767 E | HOSE (118-CM) | |||
| 155-2271 | [2] | KIT-CONNECTING PLUG (4-PIN) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 114-8843 E | SLEEVE-PLASTIC (60-CM) | |||
| 9X-3402 | [14] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 1P-0810 B | TAPE-ELECTRICAL | |||
| 8T-2225 E | TUBE-HEAT SHRINK (25.4-MM DIA)(20-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM) | |||
| 5. | 300-6446 | [1] | HARNESS AS-SENSOR (AXLE, REAR) | |
| 5P-0767 E | HOSE (231-CM) | |||
| 155-2271 | [2] | KIT-CONNECTING PLUG (4-PIN) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 114-8843 E | SLEEVE-PLASTIC (60-CM) | |||
| 9X-3402 | [14] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 1P-0810 B | TAPE-ELECTRICAL | |||
| 8T-2225 E | TUBE-HEAT SHRINK (25.4-MM DIA)(30-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM) | |||
| 6. | 303-1226 | [1] | BRACKET AS | |
| 7. | 303-1227 | [1] | BRACKET AS | |
| (EACH BRACKET AS INCLUDES) | ||||
| 8T-3490 M | [2] | NUT-WELD (M10X1.5-THD) | ||
| 8. | 303-1228 | [1] | BRACKET AS | |
| 9. | 303-1229 | [1] | BRACKET AS | |
| (EACH BRACKET AS INCLUDES) | ||||
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 10. | 5P-9297 | [2] | CLIP | |
| 11. | 8T-0267 M | [8] | BOLT-SOCKET HEAD (M6X1X12-MM) | |
| 12. | 8T-4121 C | [24] | WASHER-HARD (11X21X2.5-MM THK) | |
| 13. | 8T-4133 M | [4] | NUT (M10X1.5-THD) | |
| 14. | 8T-4137 CM | [16] | BOLT (M10X1.5X20-MM) | |
| 15. | 8T-4192 CM | [7] | BOLT (M12X1.75X25-MM) | |
| 16. | 8T-4195 M | [4] | BOLT (M10X1.5X30-MM) | |
| 17. | 8T-4223 C | [7] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 18. | 9X-8250 | [17] | CLIP | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP46720323
307-3122: WIRING GP-SENSOR
307-3122 WIRING GP-SENSOR -COLD START, FAN MOTOR SHUTOFF
S/N LKM1-1122
PART OF 317-9485 COLD WEATHER AR
AN ATTACHMENT
S/N LKM1-1122
PART OF 317-9485 COLD WEATHER AR
AN ATTACHMENT
For full view, you need register
Parts for your 938H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7K-1181 | [4] | STRAP-CABLE | |
| 2. | 307-3123 | [1] | HARNESS AS-SOLENOID | |
| 3. | 132-5789 | [2] | CLIP (LADDER) | |
| 4. | 177-0071 | [1] | SENSOR GP-TEMPERATURE (ENGINE AIR) | |
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 186-3735 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-1813 BE | SLEEVE (31-CM) | |||
| 5. | 6V-5049 | [1] | SEAL-O-RING | |
| 6. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 7. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP46720324
245-2975: ACCUMULATOR GP-HYDRAULIC
245-2975 ACCUMULATOR GP-HYDRAULIC -CHARGED
S/N LKM1-UP
PART OF 260-8834, 260-8836 CONTROL GP-DIFFERENTIAL LOCK
ALSO AN ATTACHMENT
S/N LKM1-UP
PART OF 260-8834, 260-8836 CONTROL GP-DIFFERENTIAL LOCK
ALSO AN ATTACHMENT
For full view, you need register
Parts for your 938H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 232-3317 | [1] | FILM-IDENTIFICATION (HYDRAULIC ACCUMULATOR) |
#SEBP46720325
272-4990: AXLE AR-FIXED
272-4990 AXLE AR-FIXED -MANUAL DIFFERENTIAL LOCK WITH AXLE OIL COOLER, FRONT
S/N LKM1-UP
PART OF 317-8356 AXLE AR-FIXED & OSCILLATING, 317-8359, 317-8360, 317-8362, 317-8364 CONFIGURATION AR
AN ATTACHMENT
S/N LKM1-UP
PART OF 317-8356 AXLE AR-FIXED & OSCILLATING, 317-8359, 317-8360, 317-8362, 317-8364 CONFIGURATION AR
AN ATTACHMENT
For full view, you need register
Parts for your 938H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 272-2448 Y | [2] | BRAKE GP-SERVICE | ||
| 271-8711 Y | [1] | DIFFERENTIAL & BEVEL GEAR GP (FIXED AXLE, LOCKING DIFF) | ||
| S/N LKM1-589 | ||||
| 288-9478 Y | [1] | HOUSING GP-FIXED AXLE (FRONT) | ||
| S/N LKM1-589 | ||||
| 332-1445 Y | [1] | HOUSING GP-FRONT | ||
| S/N LKM590-UP | ||||
| 288-9488 Y | [1] | LINES GP-AXLE OIL COOLER | ||
| S/N LKM1-589 | ||||
| 288-9482 Y | [1] | PISTON GP-DIFFERENTIAL LOCK | ||
| S/N LKM1-589 | ||||
| 288-9483 Y | [2] | WHEEL & FINAL DRIVE GP | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP46720326
272-4992: AXLE AR-FIXED
272-4992 AXLE AR-FIXED -AUTO DIFFERENTIAL LOCK WITH AXLE OIL COOLER, FRONT
S/N LKM1-UP
PART OF 265-9753 CONTROL AR-DIFFERENTIAL LOCK
AN ATTACHMENT
S/N LKM1-UP
PART OF 265-9753 CONTROL AR-DIFFERENTIAL LOCK
AN ATTACHMENT
For full view, you need register
Parts for your 938H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 272-2448 Y | [2] | BRAKE GP-SERVICE | ||
| 271-8711 Y | [1] | DIFFERENTIAL & BEVEL GEAR GP (FIXED AXLE, LOCKING DIFF) | ||
| S/N LKM1-589 | ||||
| 288-9478 Y | [1] | HOUSING GP-FIXED AXLE (FRONT) | ||
| S/N LKM1-589 | ||||
| 333-3124 Y | [1] | HOUSING GP-FRONT | ||
| S/N LKM590-UP | ||||
| 332-1445 Y | [1] | HOUSING GP-FRONT | ||
| S/N LKM590-UP | ||||
| 288-9488 Y | [1] | LINES GP-AXLE OIL COOLER | ||
| S/N LKM1-589 | ||||
| 288-9482 Y | [1] | PISTON GP-DIFFERENTIAL LOCK | ||
| S/N LKM1-589 | ||||
| 288-9484 Y | [2] | WHEEL & FINAL DRIVE GP | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP46720327
317-8356: AXLE AR-FIXED & OSCILLATING
317-8356 AXLE AR-FIXED & OSCILLATING -MANUAL DIFF LOCK W/AOC, FRONT
S/N LKM1-UP
AN ATTACHMENT
S/N LKM1-UP
AN ATTACHMENT
For full view, you need register
Parts for your 938H WHEEL LOADER:
CATERPILLAR SIS#SEBP46720328
271-2344: AXLE AR-OSCILLATING
271-2344 AXLE AR-OSCILLATING -OPEN DIFFERENTIAL WITH AXLE OIL COOLER, REAR
S/N LKM1-UP
PART OF 317-8356 AXLE AR-FIXED & OSCILLATING, 317-8359, 317-8360, 317-8362, 317-8364 CONFIGURATION AR
AN ATTACHMENT
S/N LKM1-UP
PART OF 317-8356 AXLE AR-FIXED & OSCILLATING, 317-8359, 317-8360, 317-8362, 317-8364 CONFIGURATION AR
AN ATTACHMENT
For full view, you need register
Parts for your 938H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 272-2448 Y | [2] | BRAKE GP-SERVICE | ||
| 271-8713 Y | [1] | DIFFERENTIAL & BEVEL GEAR GP (OSCILLATING AXLE, OPEN DIFF) | ||
| 288-9479 Y | [1] | HOUSING GP-OSCILLATING AXLE (REAR) | ||
| 288-9488 Y | [1] | LINES GP-AXLE OIL COOLER | ||
| 288-9483 Y | [2] | WHEEL & FINAL DRIVE GP | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP46720329
272-4996: AXLE AR-OSCILLATING
272-4996 AXLE AR-OSCILLATING -AUTO DIFFERENTIAL LOCK WITH AXLE OIL COOLER, REAR
S/N LKM1-UP
PART OF 265-9753 CONTROL AR-DIFFERENTIAL LOCK
AN ATTACHMENT
S/N LKM1-UP
PART OF 265-9753 CONTROL AR-DIFFERENTIAL LOCK
AN ATTACHMENT
For full view, you need register
Parts for your 938H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 272-2448 Y | [2] | BRAKE GP-SERVICE | ||
| 271-8710 Y | [1] | DIFFERENTIAL & BEVEL GEAR GP (OSCILLATING AXLE, LOCKING DIFF) | ||
| 288-9479 Y | [1] | HOUSING GP-OSCILLATING AXLE (REAR) | ||
| 288-9488 Y | [1] | LINES GP-AXLE OIL COOLER | ||
| 288-9482 Y | [1] | PISTON GP-DIFFERENTIAL LOCK | ||
| 288-9484 Y | [2] | WHEEL & FINAL DRIVE GP | ||
| Y | SEPARATE ILLUSTRATION | |||
Information:
ELECTRICAL AND STARTING SYSTEM
WIRING GP
Special Instruction
Tool Operating Manual
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Testing and Adjusting
Caterpillar Parts SIS Catalog 938H :
Truck sale:
94,734