OPERATOR STATION
CONTROL GP-PILOT OPERATED HYDCONTROL GP-STEERING
CONTROL GP-TRANSMISSION
OPERATOR STATION
CONTROL GP-PILOT OPERATED HYD
#SEBP46720810
257-5662: CONTROL GP-PILOT OPERATED HYD
257-5662 CONTROL GP-PILOT OPERATED HYD -3-FUNCTION
S/N LKM599-UP
PART OF 265-9750 HYDRAULIC AR-3 VALVE
AN ATTACHMENT
S/N LKM599-UP
PART OF 265-9750 HYDRAULIC AR-3 VALVE
AN ATTACHMENT
For full view, you need register
Parts for your 938H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 124-4401 | [3] | KNOB | |
| 2. | 140-5945 | [1] | FILM-IDENTIFICATION (HORN) | |
| 3. | 247-4184 | [1] | FILM-IDENTIFICATION (DOWNSHIFT SWITCH) | |
| 4. | 257-5630 | [1] | CUSHION AS | |
| 6V-9632 M | [4] | NUT-WELD (M6X1-THD) | ||
| 5. | 257-5633 | [1] | PLATE | |
| 6. | 257-5634 | [1] | PLATE AS | |
| 7. | 341-8739 C | [1] | GROMMET | |
| 8. | 324-6970 C | [1] | PLATE | |
| 9. | 261-8656 Y | [1] | VALVE GP-PILOT (3-FUNCTION) | |
| 10. | 262-4879 | [1] | CONSOLE AS | |
| 11. | 263-1493 | [1] | SWITCH GP-PUSH BUTTON (DOWNSHIFT) | |
| 6F-0253 | [1] | LOCKWASHER | ||
| 9X-3402 | [3] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 172-3511 | [1] | NUT (5/8-24-THD) | ||
| 12. | 265-8171 | [1] | SWITCH AS-PUSH BUTTON (HORN) | |
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 6F-0253 | [1] | LOCKWASHER | ||
| 8T-8729 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 172-3511 | [1] | NUT (5/8-24-THD) | ||
| 14. | 281-2921 | [8] | RECEPTACLE | |
| 15. | 281-2923 | [1] | RATCHET | |
| 16. | 282-0594 B | TAPE | ||
| 17. | 315-5134 | [3] | ROD | |
| 18. | 317-0755 | [1] | BRACKET | |
| 19. | 117-8929 | [4] | WASHER (6.6X22X2-MM THK) | |
| 20. | 137-3626 M | [5] | BOLT-SPECIAL (M6X1X23.25-MM) | |
| 21. | 3E-8020 CM | [4] | SCREW-TRUSS HEAD (M6X1X25-MM) | |
| 22. | 8R-3695 | [1] | GROMMET | |
| 23. | 8T-4138 M | [4] | BOLT (M6X1X20-MM) | |
| 24. | 127-2170 CM | [4] | SCREW-TRUSS HEAD (M8X1.25X20-MM) | |
| 25. | 8T-4205 | [4] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 26. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 27. | 9X-1046 M | [8] | SCREW (M4X0.7X18-MM) | |
| 28. | 6V-3884 | [4] | SCREW-HEX SOCKET (1/4-20X0.5-IN) | |
| 29. | 9X-2044 M | [4] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 30. | 8T-9005 E | SEAL (86-CM) | ||
| 30A. | 8T-9005 E | SEAL (112-CM) | ||
| 31. | 5P-5927 D | SEAL (1.4-M) | ||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP46720811
257-5663: CONTROL GP-PILOT OPERATED HYD
257-5663 CONTROL GP-PILOT OPERATED HYD -4-FUNCTION
S/N LKM1-598
PART OF 265-9760 HYDRAULIC AR-4 VALVE
AN ATTACHMENT
S/N LKM1-598
PART OF 265-9760 HYDRAULIC AR-4 VALVE
AN ATTACHMENT
For full view, you need register
Parts for your 938H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 124-4401 | [4] | KNOB | |
| 2. | 140-5945 | [1] | FILM-IDENTIFICATION (HORN) | |
| 3. | 247-4184 | [1] | FILM-IDENTIFICATION (DOWNSHIFT SWITCH) | |
| 4. | 257-5630 | [1] | CUSHION AS | |
| 6V-9632 M | [4] | NUT-WELD (M6X1-THD) | ||
| 5. | 257-5633 | [1] | PLATE | |
| 6. | 257-5634 | [1] | PLATE AS | |
| 7. | 257-5638 | [1] | GROMMET | |
| 8. | 257-5641 | [1] | SUPPORT | |
| 9. | 261-8658 Y | [1] | VALVE GP-PILOT (4-FUNCTION) | |
| 10. | 262-4881 | [1] | COVER AS | |
| 11. | 263-1493 | [1] | SWITCH GP-PUSH BUTTON (DOWNSHIFT) | |
| 6F-0253 | [1] | LOCKWASHER | ||
| 9X-3402 | [3] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 172-3511 | [1] | NUT (5/8-24-THD) | ||
| 12. | 265-8171 | [1] | SWITCH AS-PUSH BUTTON (HORN) | |
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 6F-0253 | [1] | LOCKWASHER | ||
| 186-3735 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 172-3511 | [1] | NUT (5/8-24-THD) | ||
| 13. | 267-9410 | [1] | FILM-INSTRUCTION (LIFT, TILT, AUXILIARY) | |
| 14. | 281-2921 | [8] | RECEPTACLE | |
| 15. | 281-2923 | [1] | RATCHET | |
| 16. | 282-0594 B | TAPE | ||
| 17. | 315-5134 | [4] | ROD | |
| 18. | 317-0755 | [1] | BRACKET | |
| 19. | 117-8929 | [4] | WASHER (6.6X22X2-MM THK) | |
| 20. | 137-3626 M | [5] | BOLT-SPECIAL (M6X1X23.25-MM) | |
| 21. | 3E-8020 M | [6] | SCREW-TRUSS HEAD (M6X1X25-MM) | |
| 22. | 8R-3695 | [1] | GROMMET | |
| 23. | 8T-4138 M | [4] | BOLT (M6X1X20-MM) | |
| 24. | 8T-4189 M | [4] | BOLT (M8X1.25X20-MM) | |
| 25. | 8T-4205 | [4] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 26. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 27. | 9X-1046 M | [8] | SCREW (M4X0.7X18-MM) | |
| 28. | 9X-2043 M | [4] | SCREW-TRUSS HEAD (M6X1X14-MM) | |
| 29. | 9X-2044 M | [4] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 30. | 8T-9005 E | SEAL (86-CM) | ||
| 30A. | 8T-9005 E | SEAL (112-CM) | ||
| 31. | 5P-5927 D | SEAL (1.4-M) | ||
| B | USE AS REQUIRED | |||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP46720812
257-5663: CONTROL GP-PILOT OPERATED HYD
257-5663 CONTROL GP-PILOT OPERATED HYD -4-FUNCTION
S/N LKM599-UP
PART OF 265-9760 HYDRAULIC AR-4 VALVE
AN ATTACHMENT
S/N LKM599-UP
PART OF 265-9760 HYDRAULIC AR-4 VALVE
AN ATTACHMENT
For full view, you need register
Parts for your 938H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 124-4401 | [4] | KNOB | |
| 2. | 140-5945 | [1] | FILM-IDENTIFICATION (HORN) | |
| 3. | 247-4184 | [1] | FILM-IDENTIFICATION (DOWNSHIFT SWITCH) | |
| 4. | 257-5630 | [1] | CUSHION AS | |
| 6V-9632 M | [4] | NUT-WELD (M6X1-THD) | ||
| 5. | 257-5633 | [1] | PLATE | |
| 6. | 257-5634 | [1] | PLATE AS | |
| 7. | 341-8739 C | [1] | GROMMET | |
| 8. | 324-6970 C | [1] | PLATE | |
| 9. | 261-8658 Y | [1] | VALVE GP-PILOT (4-FUNCTION) | |
| 10. | 262-4881 | [1] | COVER AS | |
| 11. | 263-1493 | [1] | SWITCH GP-PUSH BUTTON (DOWNSHIFT) | |
| 6F-0253 | [1] | LOCKWASHER | ||
| 9X-3402 | [3] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 172-3511 | [1] | NUT (5/8-24-THD) | ||
| 12. | 265-8171 | [1] | SWITCH AS-PUSH BUTTON (HORN) | |
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 6F-0253 | [1] | LOCKWASHER | ||
| 8T-8729 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 172-3511 | [3] | NUT (5/8-24-THD) | ||
| 13. | 267-9410 | [1] | FILM-INSTRUCTION (LIFT, TILT, AUXILIARY) | |
| 14. | 281-2921 | [8] | RECEPTACLE | |
| 15. | 281-2923 | [1] | RATCHET | |
| 16. | 282-0594 B | TAPE | ||
| 17. | 315-5134 | [4] | ROD | |
| 18. | 317-0755 | [1] | BRACKET | |
| 19. | 117-8929 | [4] | WASHER (6.6X22X2-MM THK) | |
| 20. | 137-3626 M | [5] | BOLT-SPECIAL (M6X1X23.25-MM) | |
| 21. | 3E-8020 CM | [4] | SCREW-TRUSS HEAD (M6X1X25-MM) | |
| 22. | 8R-3695 | [1] | GROMMET | |
| 23. | 8T-4138 M | [4] | BOLT (M6X1X20-MM) | |
| 24. | 127-2170 CM | [4] | SCREW-TRUSS HEAD (M8X1.25X20-MM) | |
| 25. | 8T-4205 | [4] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 26. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 27. | 9X-1046 M | [8] | SCREW (M4X0.7X18-MM) | |
| 28. | 6V-3884 | [4] | SCREW-HEX SOCKET (1/4-20X0.5-IN) | |
| 29. | 9X-2044 M | [4] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 30. | 8T-9005 E | SEAL (86-CM) | ||
| 30A. | 8T-9005 E | SEAL (112-CM) | ||
| 31. | 5P-5927 D | SEAL (1.4-M) | ||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP46720813
257-5664: CONTROL GP-PILOT OPERATED HYD
257-5664 CONTROL GP-PILOT OPERATED HYD -JOYSTICK, 2-FUNCTION
S/N LKM1-UP
PART OF 352-3262, 352-3263, 352-3264, 355-2826, 355-2827, 355-2828 DISTRIBUTION AR
AN ATTACHMENT
S/N LKM1-UP
PART OF 352-3262, 352-3263, 352-3264, 355-2826, 355-2827, 355-2828 DISTRIBUTION AR
AN ATTACHMENT
For full view, you need register
Parts for your 938H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 261-8653 Y | [1] | VALVE GP-PILOT (JOYSTICK, 2-FUNCTION) | |
| 2. | 262-4877 | [1] | COVER AS | |
| 3. | 267-9414 | [1] | FILM-INSTRUCTION | |
| 4. | 282-3820 Y | [1] | CONTROL GP-HANDLE (DIRECTION, DOWNSHIFT, HORN) | |
| 5. | 096-6331 M | [1] | NUT (M12X1.75-THD) | |
| 6. | 4N-9170 | [2] | CLIP | |
| 7. | 8T-9005 E | SEAL (137-CM) | ||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP46720814
257-5665: CONTROL GP-PILOT OPERATED HYD
257-5665 CONTROL GP-PILOT OPERATED HYD -JOYSTICK, 3-FUNCTION
S/N LKM1-UP
AN ATTACHMENT
S/N LKM1-UP
AN ATTACHMENT
For full view, you need register
Parts for your 938H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 261-8655 Y | [1] | VALVE GP-PILOT (JOYSTICK, 3-FUNCTION) | |
| 2. | 262-4878 | [1] | COVER AS | |
| 3. | 267-9415 | [1] | FILM-INSTRUCTION | |
| 4. | 282-3820 Y | [1] | CONTROL GP-HANDLE (DIRECTION, DOWNSHIFT, HORN) | |
| 5. | 315-8297 | [1] | ROD | |
| 6. | 096-6331 M | [2] | NUT (M12X1.75-THD) | |
| 7. | 4N-9170 | [2] | CLIP | |
| 8. | 8T-9005 E | SEAL (137-CM) | ||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP46720815
257-5666: CONTROL GP-PILOT OPERATED HYD
257-5666 CONTROL GP-PILOT OPERATED HYD -JOYSTICK, 4-FUNCTION
S/N LKM1-UP
AN ATTACHMENT
S/N LKM1-UP
AN ATTACHMENT
For full view, you need register
Parts for your 938H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 261-8657 Y | [1] | VALVE GP-PILOT (JOYSTICK, 4-FUNCTION) | |
| 2. | 262-4880 | [1] | COVER AS | |
| 3. | 267-9416 | [1] | FILM-INSTRUCTION | |
| 4. | 282-3820 Y | [1] | CONTROL GP-HANDLE (DIRECTION, DOWNSHIFT, HORN) | |
| 5. | 315-8297 | [2] | ROD | |
| 6. | 096-6331 M | [3] | NUT (M12X1.75-THD) | |
| 7. | 4N-9170 | [2] | CLIP | |
| 8. | 8T-9005 E | SEAL (137-CM) | ||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP46720816
257-5688: CONTROL GP-STEERING
For full view, you need register
Parts for your 938H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2T-3360 | [1] | BUTTON AS-HORN | |
| 2. | 8R-2918 | [1] | KNOB AS | |
| 3. | 9D-7924 | [4] | MOUNTING AS | |
| 4. | 107-6141 | [1] | COVER | |
| 5. | 111-7874 | [1] | SEAL | |
| 6. | 280-6837 Y | [1] | STEERING COLUMN GP-ADJUSTABLE | |
| 7. | 217-7937 | [1] | PLATE AS | |
| 8T-3612 M | [4] | NUT-WELD (M8X1.25-THD) | ||
| 8. | 111-7878 | [1] | COVER | |
| 9. | 129-3270 | [1] | STEERING WHEEL AS | |
| 10. | 257-5687 | [1] | SUPPORT AS | |
| 11. | 7X-0603 | [4] | WASHER-HARD (9.9X35X2.5-MM THK) | |
| 12. | 8T-4121 | [7] | WASHER-HARD (11X21X2.5-MM THK) | |
| 13. | 8T-4136 M | [7] | BOLT (M10X1.5X25-MM) | |
| 14. | 8T-4191 M | [4] | BOLT (M10X1.5X16-MM) | |
| 15. | 8T-6869 M | [4] | BOLT (M8X1.25X60-MM) | |
| 16. | 8T-8894 M | [4] | BOLT-SOCKET HEAD (M10X1.5X20-MM) | |
| 17. | 9X-2045 M | [6] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 19. | 8T-9005 E | SEAL (157-CM) | ||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP46720817
257-5688: CONTROL GP-STEERING
For full view, you need register
Parts for your 938H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 322-8568 | [1] | BUTTON AS-HORN | |
| 2. | 8R-2918 | [1] | KNOB AS | |
| 8T-4244 M | [1] | NUT (M12X1.75-THD) | ||
| 3. | 107-6141 | [1] | COVER | |
| 4. | 111-7878 | [1] | COVER | |
| 5. | 363-5911 | [1] | STEERING WHEEL AS | |
| 363-6423 | [1] | PLUG | ||
| 6. | 319-1625 CY | [1] | STEERING COLUMN GP-ADJUSTABLE | |
| 7. | 8T-4121 | [7] | WASHER-HARD (11X21X2.5-MM THK) | |
| 8. | 8T-4136 M | [7] | BOLT (M10X1.5X25-MM) | |
| 9. | 8T-8894 M | [4] | BOLT-SOCKET HEAD (M10X1.5X20-MM) | |
| 10. | 257-5687 | [1] | SUPPORT AS | |
| 11. | 9X-2045 M | [6] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 12. | 8T-9005 E | SEAL (157-CM) | ||
| 13. | 361-2564 | [1] | COVER | |
| 14. | 174-8131 M | [3] | SCREW-TRUSS HEAD (M4X0.7X12-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP46720818
199-3460: CONTROL GP-TRANSMISSION
199-3460 CONTROL GP-TRANSMISSION
S/N LKM1-1188
PART OF 252-4553 CAB AR-ENCLOSED ROPS
S/N LKM1-1188
PART OF 252-4553 CAB AR-ENCLOSED ROPS
For full view, you need register
Parts for your 938H WHEEL LOADER:
CATERPILLAR SIS#SEBP46720819
199-3460: CONTROL GP-TRANSMISSION
199-3460 CONTROL GP-TRANSMISSION
S/N LKM1189-UP
PART OF 252-4553 CAB AR-ENCLOSED ROPS
S/N LKM1189-UP
PART OF 252-4553 CAB AR-ENCLOSED ROPS
For full view, you need register
Parts for your 938H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 299-5841 CY | [1] | CONTROL GP-TRANSMISSION | |
| 2. | 134-1374 M | [4] | BOLT-SOCKET HEAD (M5X0.8X20-MM) | |
| 3. | 101-9161 C | [1] | WIRE AS | |
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [2] | PLUG-SEAL | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
Information:
Caterpillar Parts SIS Catalog 938H :
Truck sale:
94,734