COOLING SYSTEM
PUMP GP-WATERVALVE GP-FLUID SAMPLING
COOLING SYSTEM
PUMP GP-WATER
#SEBP46790140
297-6833: PUMP GP-AUXILIARY WATER
For full view, you need register
Parts for your - CLEAN EMISSION MODULE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7E-7631 | [1] | COVER-WATER PUMP | |
| 2. | 149-5462 | [1] | SEAL-O-RING | |
| 3. | 416-0613 CY | [1] | PUMP GP-WATER | |
| 4. | 0S-1594 | [4] | BOLT (3/8-16X1-IN) | |
| 5. | 2M-9780 | [1] | SEAL-O-RING | |
| 6. | 5H-6734 | [1] | SEAL-O-RING | |
| 7. | 9M-2151 | [3] | STUD-TAPERLOCK (3/8-16X1.378-IN) | |
| 8. | 9S-4190 | [1] | PLUG-O-RING (7/8-14-THD) | |
| 9. | 9S-8752 | [3] | NUT-FULL (3/8-16-THD) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP46790141
313-2650: PUMP GP-AUXILIARY WATER
313-2650 PUMP GP-AUXILIARY WATER
S/N PRC1-UP; SDX1-UP
PART OF 297-6833, 9Y-8909 PUMP GP-AUXILIARY WATER
S/N PRC1-UP; SDX1-UP
PART OF 297-6833, 9Y-8909 PUMP GP-AUXILIARY WATER
For full view, you need register
Parts for your - CLEAN EMISSION MODULE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 313-4432 | [1] | HOUSING AS-PUMP | |
| 3D-2824 | [1] | SEAL-O-RING | ||
| 4N-5834 | [2] | FILTER-FOAM (WATER PUMP HOUSING) | ||
| 7G-8478 | [1] | ADAPTER | ||
| 8T-6765 | [1] | PLUG-PIPE (1/4-18-THD) | ||
| 313-2651 | [1] | HOUSING-WATER PUMP | ||
| 2. | 212-8180 | [1] | SHAFT AS-PUMP DRIVE | |
| 4B-9782 | [1] | BALL | ||
| 3. | 0S-1618 | [2] | BOLT (5/16-18X1-IN) | |
| 4. | 9M-1974 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 5. | 7N-4758 | [1] | WASHER-THRUST | |
| 6. | 9X-4594 | [1] | SEAL-LIP TYPE | |
| 7. | 166-4376 | [1] | SEAL GP (WATER PUMP) | |
| 8. | 212-8186 | [1] | IMPELLER | |
| 11. | 166-4374 | [1] | RING AS | |
| 1L-5316 | [1] | PIN-SPRING |
#SEBP46790142
9Y-8909: PUMP GP-AUXILIARY WATER
9Y-8909 PUMP GP-AUXILIARY WATER -FRESH WATER
S/N SDX1-102
S/N SDX1-102
For full view, you need register
Parts for your - CLEAN EMISSION MODULE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 313-2650 CY | [1] | PUMP GP-AUXILIARY WATER (FRESH WATER) | |
| 2. | 7E-7631 | [1] | COVER-WATER PUMP | |
| 3. | 9S-8752 | [3] | NUT-FULL (3/8-16-THD) | |
| 4. | 9M-2151 | [3] | STUD-TAPERLOCK (3/8-16X1.378-IN) | |
| 5. | 149-5462 | [1] | SEAL-O-RING | |
| 6. | 5H-6734 | [1] | SEAL-O-RING | |
| 7. | 0S-1594 | [4] | BOLT (3/8-16X1-IN) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP46790143
212-8174: PUMP GP-WATER
212-8174 PUMP GP-WATER -AUXILIARY
S/N SDX1-102
PART OF 297-6833 PUMP GP-AUXILIARY WATER
S/N SDX1-102
PART OF 297-6833 PUMP GP-AUXILIARY WATER
For full view, you need register
Parts for your - CLEAN EMISSION MODULE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 137-8241 | [1] | HOUSING AS-PUMP | |
| 3D-2824 | [1] | SEAL-O-RING | ||
| 4N-5834 | [2] | FILTER-FOAM (WATER PUMP HOUSING) | ||
| 7G-8478 | [1] | ADAPTER | ||
| 8T-6765 | [1] | PLUG-PIPE (1/4-18-THD) | ||
| 2. | 212-8180 | [1] | SHAFT AS-PUMP DRIVE | |
| 4B-9782 | [1] | BALL | ||
| 3. | 0S-1618 | [2] | BOLT (5/16-18X1-IN) | |
| 4. | 9M-1974 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 5. | 7N-4758 | [1] | WASHER-THRUST | |
| 6. | 9X-4594 | [1] | SEAL-LIP TYPE | |
| 7. | 166-4376 | [1] | SEAL GP (WATER PUMP) | |
| 8. | 212-8186 | [1] | IMPELLER | |
| 11. | 166-4374 | [1] | RING AS | |
| 1L-5316 | [1] | PIN-SPRING |
#SEBP46790144
212-8177: PUMP GP-WATER
For full view, you need register
Parts for your - CLEAN EMISSION MODULE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7N-4756 | [1] | HOUSING AS-PUMP | |
| 1A. | 3D-2824 J | [1] | SEAL-O-RING | |
| 1B. | 7G-8478 | [1] | ADAPTER | |
| 1C. | 4N-5834 J | [2] | FILTER-FOAM (WATER PUMP HOUSING) | |
| 1D. | 8T-6765 | [1] | PLUG-PIPE (1/4-18-THD) | |
| 2. | 212-8180 J | [1] | SHAFT AS-PUMP DRIVE | |
| 4B-9782 J | [1] | BALL | ||
| 3. | 0S-1618 J | [2] | BOLT (5/16-18X1-IN) | |
| 4. | 9M-1974 J | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 5. | 7N-4758 J | [1] | WASHER-THRUST | |
| 6. | 8C-5236 J | [1] | SEAL-LIP TYPE | |
| 7. | 166-4376 J | [1] | SEAL GP (WATER PUMP) | |
| 8. | 212-8184 J | [1] | IMPELLER | |
| 11. | 166-4374 J | [1] | RING AS | |
| 1L-5316 J | [1] | PIN-SPRING | ||
| AVAILABLE REPAIR KIT(S): | ||||
| 222-5152 J | KIT-WATER PUMP | |||
| J | KIT MARKED J INCLUDES PART(S) MARKED J | |||
#SEBP46790145
2W-9729: PUMP GP-WATER
2W-9729 PUMP GP-WATER
S/N PRC1-103; SDX1-107
S/N PRC1-103; SDX1-107
For full view, you need register
Parts for your - CLEAN EMISSION MODULE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 212-8177 CY | [1] | PUMP GP-WATER | |
| 2. | 8N-6423 | [1] | COVER (WATER INLET) | |
| 3. | 3B-1915 | [4] | BOLT (3/8-16X1.375-IN) | |
| 4. | 5H-6734 | [1] | SEAL-O-RING | |
| 5. | 149-5462 | [1] | SEAL-O-RING | |
| 6. | 9S-8752 | [3] | NUT-FULL (3/8-16-THD) | |
| 7. | 9M-2151 | [3] | STUD-TAPERLOCK (3/8-16X1.378-IN) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP46790146
2W-9729: PUMP GP-WATER
2W-9729 PUMP GP-WATER
S/N PRC104-UP; SDX108-UP
S/N PRC104-UP; SDX108-UP
For full view, you need register
Parts for your - CLEAN EMISSION MODULE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 416-0610 CY | [1] | PUMP GP-WATER | |
| 2. | 8N-6423 | [1] | COVER (WATER INLET) | |
| 3. | 3B-1915 | [4] | BOLT (3/8-16X1.375-IN) | |
| 4. | 5H-6734 | [1] | SEAL-O-RING | |
| 5. | 149-5462 | [1] | SEAL-O-RING | |
| 6. | 9S-8752 | [3] | NUT-FULL (3/8-16-THD) | |
| 7. | 9M-2151 | [3] | STUD-TAPERLOCK (3/8-16X1.378-IN) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP46790147
416-0610: PUMP GP-WATER
For full view, you need register
Parts for your - CLEAN EMISSION MODULE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7N-4756 | [1] | HOUSING AS-PUMP | |
| 3D-2824 | [1] | SEAL-O-RING | ||
| 4N-5834 | [2] | FILTER-FOAM (WATER PUMP HOUSING) | ||
| 7G-8478 | [1] | ADAPTER | ||
| 8T-6765 | [1] | PLUG-PIPE (1/4-18-THD) | ||
| 2. | 7N-4758 | [1] | WASHER-THRUST | |
| 3. | 166-4374 | [1] | RING AS | |
| 1L-5316 | [1] | PIN-SPRING | ||
| 4. | 416-0603 | [1] | SEAL GP (WATER PUMP) | |
| 5. | 212-8180 | [1] | SHAFT AS-PUMP DRIVE | |
| 4B-9782 | [1] | BALL | ||
| 6. | 212-8184 | [1] | IMPELLER | |
| 7. | 9M-1974 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 8. | 0S-1618 | [2] | BOLT (5/16-18X1-IN) | |
| 9. | 8C-5236 | [1] | SEAL-LIP TYPE |
#SEBP46790148
416-0613: PUMP GP-WATER
For full view, you need register
Parts for your - CLEAN EMISSION MODULE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 313-4432 | [1] | HOUSING AS-PUMP | |
| 3D-2824 | [1] | SEAL-O-RING | ||
| 4N-5834 | [2] | FILTER-FOAM (WATER PUMP HOUSING) | ||
| 7G-8478 | [1] | ADAPTER | ||
| 8T-6765 | [1] | PLUG-PIPE (1/4-18-THD) | ||
| 313-2651 | [1] | HOUSING-WATER PUMP | ||
| 2. | 212-8186 | [1] | IMPELLER | |
| 3. | 212-8180 | [1] | SHAFT AS-PUMP DRIVE | |
| 4B-9782 | [1] | BALL | ||
| 4. | 166-4374 | [1] | RING AS | |
| 1L-5316 | [1] | PIN-SPRING | ||
| 5. | 7N-4758 | [1] | WASHER-THRUST | |
| 6. | 0S-1618 | [2] | BOLT (5/16-18X1-IN) | |
| 7. | 416-0603 | [1] | SEAL GP (WATER PUMP) | |
| 8. | 9X-4594 | [1] | SEAL-LIP TYPE | |
| 9. | 9M-1974 | [2] | WASHER-HARD (8.8X16X2-MM THK) |
#SEBP46790149
163-2596: VALVE GP-COOLANT SAMPLING
163-2596 VALVE GP-COOLANT SAMPLING
S/N PRC1-103
S/N PRC1-103
For full view, you need register
