AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

G3306B Gas Engine R6S00001-UP BASIC ENGINE Caterpillar SIS



GAS ENGINE G3306B GAS ENGINE R6S
 G3306B Gas Engine R6S00001-UP SEBP4692 G3306B R6S   (2010)

Parts group G3306B:

  For full view, you need register
BASIC ENGINE
BELT TIGHTENER GP
BELT TIGHTENER GP
3N-2755 BELT TIGHTENER GP
3N-2755 BELT TIGHTENER GP
FOR USE AS A FAN DRIVE BELT TIGHTENER WHEN ALTERNATOR IS NOT USED
FOR USE WITH INDUSTRIAL ENGINE SUPPORT
CANNOT BE USED WITH MOBILE EQUIPMENT FRONT ENGINE SUPPORT
AN ATTACHMENT
CAMSHAFT GP
CAMSHAFT GP
1N-4406 CAMSHAFT GP
1N-4406 CAMSHAFT GP
SINGLE
PART OF 527-1084 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
CLUTCH GP
CLUTCH GP
3N-9097 CLUTCH GP
3N-9097 CLUTCH GP
PART OF 3N-9098 POWER TAKE-OFF GP
AN ATTACHMENT
CRANKSHAFT GP
ADAPTER GP-SEAL
3N-2886 ADAPTER GP-SEAL
3N-2886 ADAPTER GP-SEAL -CRANKSHAFT
FRONT
PART OF 527-1084 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
CRANKSHAFT AS
334-8389 CRANKSHAFT AS
334-8389 CRANKSHAFT AS
PART OF 6N-8079 CRANKSHAFT GP
ALSO AN ATTACHMENT
CRANKSHAFT GP
6N-8079 CRANKSHAFT GP
6N-8079 CRANKSHAFT GP
PART OF 527-1084 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
SEAL GP-CRANKSHAFT
2P-6224 SEAL GP-CRANKSHAFT
2P-6224 SEAL GP-CRANKSHAFT
S/N R6S1-195
SEAL GP-CRANKSHAFT
383-2804 SEAL GP-CRANKSHAFT
383-2804 SEAL GP-CRANKSHAFT
S/N R6S196-UP
PART OF 527-1084 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
CYLINDER BLOCK GP
COVER GP-CYLINDER BLOCK
7N-1292 COVER GP-CYLINDER BLOCK
7N-1292 COVER GP-CYLINDER BLOCK
PART OF 527-1084 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
CYLINDER BLOCK GP
1N-3576 CYLINDER BLOCK GP
1N-3576 CYLINDER BLOCK GP
FIELD REPLACEMENT FOR @@@@@ 7N-6550@@@@@
FIELD INSTALLATION
CYLINDER BLOCK GP
7N-6550 CYLINDER BLOCK GP
7N-6550 CYLINDER BLOCK GP
PART OF 7N-8016 CYLINDER BLOCK GP
FIELD REPLACEMENT ORDER @@@@@ 1N-3576@@@@@, 6N-7727 KIT-CYLINDER BLOCK
ALSO AN ATTACHMENT
CYLINDER BLOCK GP
7N-8016 CYLINDER BLOCK GP
7N-8016 CYLINDER BLOCK GP
PART OF 527-1084 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
PLUG GP-ENGINE
349-8707 PLUG GP-ENGINE
349-8707 PLUG GP-ENGINE
FOR USE WITH NON AIR FUEL RATIO CONTROL ARRANGEMENT
AN ATTACHMENT
PLUG GP-ENGINE
453-9530 PLUG GP-ENGINE
453-9530 PLUG GP-ENGINE
FOR USE WITH NON AIR FUEL RATIO CONTROL
AN ATTACHMENT
CYLINDER HEAD GP
COVER GP-CYLINDER HEAD
2P-6530 COVER GP-CYLINDER HEAD
2P-6530 COVER GP-CYLINDER HEAD
PART OF 527-1084 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
CYLINDER HEAD AS
9Y-2638 CYLINDER HEAD AS
9Y-2638 CYLINDER HEAD AS
PART OF 416-8456, 489-3135, 9Y-3640 CYLINDER HEAD GP
FIELD REPLACEMENT ORDER @@@@@ 6I-2402@@@@@
ALSO AN ATTACHMENT
CYLINDER HEAD GP
416-8456 CYLINDER HEAD GP
416-8456 CYLINDER HEAD GP
S/N R6S692-UP
CYLINDER HEAD GP
489-3135 CYLINDER HEAD GP
489-3135 CYLINDER HEAD GP
PART OF 6I-2401, 6I-2402 CYLINDER HEAD GP
CYLINDER HEAD GP
6I-2401 CYLINDER HEAD GP
6I-2401 CYLINDER HEAD GP
FIELD REPLACEMENT FOR @@@@@ 9Y-2638@@@@@
CYLINDER HEAD GP
6I-2402 CYLINDER HEAD GP
6I-2402 CYLINDER HEAD GP
FIELD REPLACEMENT FOR @@@@@ 9Y-2638@@@@@
CYLINDER HEAD GP
9Y-3640 CYLINDER HEAD GP
9Y-3640 CYLINDER HEAD GP
PART OF 527-1084 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
FASTENER GP-CYLINDER HEAD
7N-9536 FASTENER GP-CYLINDER HEAD
7N-9536 FASTENER GP-CYLINDER HEAD
ADDITIONAL CYLINDER HEAD FASTENER BOLT AND WASHER CAN BE FOUND IN 7C-7013.
PART OF 527-1084 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
PLUG GP-ENGINE
349-8707 PLUG GP-ENGINE
349-8707 PLUG GP-ENGINE
FOR USE WITH NON AIR FUEL RATIO CONTROL ARRANGEMENT
AN ATTACHMENT
PLUG GP-ENGINE
453-9530 PLUG GP-ENGINE
453-9530 PLUG GP-ENGINE
FOR USE WITH NON AIR FUEL RATIO CONTROL
AN ATTACHMENT
DAMPER GP
DAMPER GP
3N-2885 DAMPER GP
3N-2885 DAMPER GP
PART OF 527-1084 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
DRIVE GP-ACCESSORY
DRIVE GP-ACCESSORY
7N-6110 DRIVE GP-ACCESSORY
7N-6110 DRIVE GP-ACCESSORY
AN ATTACHMENT
DRIVE GP-FAN
DRIVE GP-FAN
197-0740 DRIVE GP-FAN
197-0740 DRIVE GP-FAN
AN ATTACHMENT
DRIVE GP-FAN
3N-7210 DRIVE GP-FAN
3N-7210 DRIVE GP-FAN
FOR USE WITH FAN PULLEY & ALTERNATOR OR BELT TIGHTENER
AN ATTACHMENT
DRIVE GP-FAN
521-0629 DRIVE GP-FAN
521-0629 DRIVE GP-FAN -BELT
AN ATTACHMENT
FLYWHEEL GP
398-1347 FLYWHEEL GP
398-1347 FLYWHEEL GP
AN ATTACHMENT
FLYWHEEL GP
7N-4137 FLYWHEEL GP
7N-4137 FLYWHEEL GP
AN ATTACHMENT
GEAR GP
GEAR GP-FRONT
329-9621 GEAR GP-FRONT
329-9621 GEAR GP-FRONT -TIMING
PART OF 527-1084 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
HOUSING GP-FRONT
327-3489 HOUSING GP-FRONT
327-3489 HOUSING GP-FRONT
PART OF 527-1084 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
GUARD GP-BELT
GUARD GP-BELT
343-3821 GUARD GP-BELT
343-3821 GUARD GP-BELT
S/N R6S1-203
AN ATTACHMENT
GUARD GP-BELT
343-3821 GUARD GP-BELT
343-3821 GUARD GP-BELT
S/N R6S204-224
AN ATTACHMENT
GUARD GP-BELT
343-3821 GUARD GP-BELT
343-3821 GUARD GP-BELT
S/N R6S225-UP
AN ATTACHMENT
GUARD GP-BELT
345-7526 GUARD GP-BELT
345-7526 GUARD GP-BELT
AN ATTACHMENT
GUARD GP-BELT
444-9861 GUARD GP-BELT
444-9861 GUARD GP-BELT
FOR USE WITH STUB SHAFT
CANNOT BE USED WITH CSA ALTERNATOR
AN ATTACHMENT
GUARD GP-BELT
444-9862 GUARD GP-BELT
444-9862 GUARD GP-BELT
FOR USE WITH CSA ALTERNATOR
CANNOT BE USED WITH STUB SHAFT
AN ATTACHMENT
GUARD GP-BELT
444-9863 GUARD GP-BELT
444-9863 GUARD GP-BELT
FOR USE WITH CSA ALTERNATOR, STUB SHAFT
AN ATTACHMENT
HOUSING GP-FLYWHEEL
HOUSING GP-FLYWHEEL
8N-2395 HOUSING GP-FLYWHEEL
8N-2395 HOUSING GP-FLYWHEEL
PART OF 527-1084 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
HOUSING GP-FRONT
COVER GP-FRONT HOUSING
329-9623 COVER GP-FRONT HOUSING
329-9623 COVER GP-FRONT HOUSING
PART OF 527-1084 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
FASTENER GP-FRONT HOUSING
329-9622 FASTENER GP-FRONT HOUSING
329-9622 FASTENER GP-FRONT HOUSING
PART OF 527-1084 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
GEAR GP-FRONT
329-9621 GEAR GP-FRONT
329-9621 GEAR GP-FRONT -TIMING
PART OF 527-1084 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
HOUSING GP-FRONT
327-3489 HOUSING GP-FRONT
327-3489 HOUSING GP-FRONT
PART OF 527-1084 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
LIFTING GP-ENGINE
LIFTING GP-ENGINE
8N-3157 LIFTING GP-ENGINE
8N-3157 LIFTING GP-ENGINE
PART OF 527-1084 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
MOUNTING GP-ENGINE
SUPPORT GP-ENGINE
1W-5122 SUPPORT GP-ENGINE
1W-5122 SUPPORT GP-ENGINE
REAR
PART OF 527-1084 ENGINE AR-COMPLETE
AN ATTACHMENT
SUPPORT GP-ENGINE
398-3091 SUPPORT GP-ENGINE
398-3091 SUPPORT GP-ENGINE -REAR
AN ATTACHMENT
SUPPORT GP-ENGINE
3N-2883 SUPPORT GP-ENGINE
3N-2883 SUPPORT GP-ENGINE
PART OF 527-1084 ENGINE AR-COMPLETE
FOR USE WITH RADIATOR & MOBILE EQUIPMENT AR
ALSO AN ATTACHMENT
SUPPORT GP-ENGINE
3N-6695 SUPPORT GP-ENGINE
3N-6695 SUPPORT GP-ENGINE -FRONT
PART OF 527-1084 ENGINE AR-COMPLETE
FOR USE WITH STANDARD INDUSTRIAL TYPE SUPPORT
CANNOT BE USED WITH RADIATOR
AN ATTACHMENT
PAN GP-OIL
PAN GP-OIL
1W-0592 PAN GP-OIL
1W-0592 PAN GP-OIL
PART OF 527-1084 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
PISTON & ROD GP
PISTON & ROD GP
126-0185 PISTON & ROD GP
126-0185 PISTON & ROD GP
10.5:1 RATIO
PISTON & ROD GP
4P-2699 PISTON & ROD GP
4P-2699 PISTON & ROD GP
8:1 RATIO
PART OF 527-1084 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
POWER TAKE-OFF GP
POWER TAKE-OFF GP
3N-9098 POWER TAKE-OFF GP
3N-9098 POWER TAKE-OFF GP
CLUTCH
FOR USE WITH SAE NO. 1 FLYWHEEL
AN ATTACHMENT
PULLEY GP
PULLEY GP-CRANKSHAFT
3N-2884 PULLEY GP-CRANKSHAFT
3N-2884 PULLEY GP-CRANKSHAFT
PART OF 527-1084 ENGINE AR-COMPLETE
FOR USE WITH MOBILE EQUIPMENT AR
ALSO AN ATTACHMENT
PULLEY GP-CRANKSHAFT
3N-6128 PULLEY GP-CRANKSHAFT
3N-6128 PULLEY GP-CRANKSHAFT
2 GROOVE
CANNOT BE USED WITH STUB SHAFT
AN ATTACHMENT
PULLEY GP-FAN DRIVE
3N-5626 PULLEY GP-FAN DRIVE
3N-5626 PULLEY GP-FAN DRIVE
PROVIDES A 3 GROOVE 7.50 INCH DIAMETER PULLEY WITH A GROOVE WIDTH OF 0.50 INCH
AN ATTACHMENT
PULLEY GP-FAN DRIVE
3N-5627 PULLEY GP-FAN DRIVE
3N-5627 PULLEY GP-FAN DRIVE
PART OF 521-0629 DRIVE GP-FAN
FOR USE WITH CUSTOMER SUPPLIED RADIATOR
AN ATTACHMENT
SHAFT GP-STUB
SHAFT GP-STUB
136-2150 SHAFT GP-STUB
136-2150 SHAFT GP-STUB
AN ATTACHMENT
SHAFT GP-STUB
6L-2692 SHAFT GP-STUB
6L-2692 SHAFT GP-STUB
REAR
AN ATTACHMENT
SERPENTINE/V-BELTS
GUARD GP-BELT
343-3821 GUARD GP-BELT
343-3821 GUARD GP-BELT
S/N R6S1-203
AN ATTACHMENT
GUARD GP-BELT
343-3821 GUARD GP-BELT
343-3821 GUARD GP-BELT
S/N R6S204-224
AN ATTACHMENT
GUARD GP-BELT
343-3821 GUARD GP-BELT
343-3821 GUARD GP-BELT
S/N R6S225-UP
AN ATTACHMENT
GUARD GP-BELT
345-7526 GUARD GP-BELT
345-7526 GUARD GP-BELT
AN ATTACHMENT
GUARD GP-BELT
444-9861 GUARD GP-BELT
444-9861 GUARD GP-BELT
FOR USE WITH STUB SHAFT
CANNOT BE USED WITH CSA ALTERNATOR
AN ATTACHMENT
GUARD GP-BELT
444-9862 GUARD GP-BELT
444-9862 GUARD GP-BELT
FOR USE WITH CSA ALTERNATOR
CANNOT BE USED WITH STUB SHAFT
AN ATTACHMENT
GUARD GP-BELT
444-9863 GUARD GP-BELT
444-9863 GUARD GP-BELT
FOR USE WITH CSA ALTERNATOR, STUB SHAFT
AN ATTACHMENT
V-BELT SET
319-6293 V-BELT SET
319-6293 V-BELT SET
AN ATTACHMENT
8L-4526 V-BELT SET
8L-4526 V-BELT SET
1359MM (53.5 IN) LG. 254MM FAN MOUNTING HEIGHT, INCLUDES 3-BELTS, FAN DRIVE
AN ATTACHMENT
9L-2520 V-BELT SET
9L-2520 V-BELT SET
19-IN FAN CENTER. FAN DRIVE
AN ATTACHMENT
VALVE MECHANISM GP
COVER GP-VALVE MECHANISM
8N-4745 COVER GP-VALVE MECHANISM
8N-4745 COVER GP-VALVE MECHANISM
PART OF 527-1084 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
VALVE MECHANISM GP
7C-3795 VALVE MECHANISM GP
7C-3795 VALVE MECHANISM GP
PART OF 7E-1556 VALVE MECHANISM GP
ALSO AN ATTACHMENT
VALVE MECHANISM GP
7E-1556 VALVE MECHANISM GP
7E-1556 VALVE MECHANISM GP
PART OF 527-1084 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
ENGINE OVERHAUL KIT
542-8705 KIT-ENGINE OVERHAUL
542-8705 KIT-ENGINE OVERHAUL
FIELD INSTALLATION
542-9397 KIT-ENGINE OVERHAUL
542-9397 KIT-ENGINE OVERHAUL
FIELD INSTALLATION
542-9436 KIT-ENGINE OVERHAUL
542-9436 KIT-ENGINE OVERHAUL
FIELD INSTALLATION

Information:

(For parts list, see above)

Disassembly and Assembly
Engine Balancer Shaft - Remove and Install
G3304B and G3306B Engines
Specifications
Belt Tension Chart
G3304B and G3306B Engines
Belt Tightener
G3304B and G3306B Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Camshafts {1210, 1210}
Reuse and Salvage for Camshafts {1210, 1210}
Testing and Adjusting
Excessive Bearing Wear - Inspect
G3306B Petroleum Generator Set Engines
Disassembly and Assembly
Camshaft - Remove
G3304B and G3306B Engines
Camshaft - Install
G3304B and G3306B Engines
Camshaft Bearings - Remove and Install
G3304B and G3306B Engines
Specifications
Seal Adapter (Front)
G3304B and G3306B Engines
Operation and Maintenance Manual
Power Take-Off Clutch - Check
G3304B and G3306B Engines
Driven Equipment - Check
G3304B and G3306B Engines
Engine News
An Improved Front Crankshaft Seal Is Used on G3300 Engines {1160, 1161}
2014/07/11
Operation and Maintenance Manual
Crankshaft Vibration Damper - Inspect
G3304B and G3306B Engines
Specifications
Crankshaft Pulley
G3304B and G3306B Engines
Crankshaft Wear Sleeves and Seals
G3304B and G3306B Engines
Crankshaft
G3304B and G3306B Engines
Connecting Rod and Main Bearing Journals
G3304B and G3306B Engines
Systems Operation
Crankshaft
G3304B and G3306B Engines
Reuse And Salvage Guidelines
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Testing and Adjusting
Excessive Bearing Wear - Inspect
G3306B Petroleum Generator Set Engines
Main Bearings - Inspect
G3304B and G3306B Engines
Disassembly and Assembly
Bearing Clearance - Check
G3304B and G3306B Engines
Crankshaft Front Seal and Wear Sleeve - Remove
G3304B and G3306B Engines
Crankshaft Front Seal and Wear Sleeve - Install
G3304B and G3306B Engines
Crankshaft Rear Seal and Wear Sleeve - Remove
G3304B and G3306B Engines
Crankshaft Rear Seal and Wear Sleeve - Install
G3304B and G3306B Engines
Crankshaft Main Bearings - Remove
G3304B and G3306B Engines
Crankshaft Main Bearings - Install
G3304B and G3306B Engines
Crankshaft - Remove
G3304B and G3306B Engines
Crankshaft - Install
G3304B and G3306B Engines
Engine News
A New Liner Seal Is Used on Certain G3300 Engines {1201}
2015/07/07
Operation and Maintenance Manual
Cylinder Pressure - Test/Record
G3304B and G3306B Engines
Special Instruction
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR INSPECTING THE CYLINDER PACKS AND POSSIBLY CHANGE THE ENGINE OIL ON CERTAIN G3300 NATURALLY ASPIRATED ENGINES
PRODUCT SUPPORT PROGRAM FOR INSPECTING THE CYLINDER PACKS AND POSSIBLY CHANGE THE ENGINE OIL ON CERTAIN G3300 NATURALLY ASPIRATED ENGINES
Specifications
Cylinder Liner
G3304B and G3306B Engines
Connecting Rod
G3304B and G3306B Engines
Piston and Rings
G3304B and G3306B Engines
Cylinder Block
G3304B and G3306B Engines
Systems Operation
Cylinder Block, Liners and Heads
G3304B and G3306B Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Testing and Adjusting
Excessive Bearing Wear - Inspect
G3306B Petroleum Generator Set Engines
Main Bearings - Inspect
G3304B and G3306B Engines
Cylinder Block - Inspect
G3306B Petroleum Generator Set Engines
Cylinder Liner Projection - Inspect
G3304B and G3306B Engines
Disassembly and Assembly
Bearing Clearance - Check
G3304B and G3306B Engines
Connecting Rod Bearings - Remove and Install
G3304B and G3306B Engines
Cylinder Liner - Remove
G3304B and G3306B Engines
Cylinder Liner - Install
G3304B and G3306B Engines
Camshaft Bearings - Remove and Install
G3304B and G3306B Engines
Crankshaft Main Bearings - Remove
G3304B and G3306B Engines
Crankshaft Main Bearings - Install
G3304B and G3306B Engines
Engine News
A New Cylinder Head Group with Valve Seals Is Used for G3306 Naturally Aspirated Engines {1100}
2014/04/25
Cat<SUP>&reg;</SUP> Reman Now Offers Upgrade to New Cylinder Heads for Certain Engines {1100}
2014/10/03
An Improved Cylinder Head Is Now Used on Certain G3306 Engines {1101}
An Improved Cylinder Head Is Now Used on Certain G3306 Engines {1101}
Operation and Maintenance Manual
Valve Stem Projection - Measure/Record
G3304B and G3306B Engines
Special Instruction
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Specifications
Cylinder Head
G3304B and G3306B Engines
Cylinder Head Valves
G3304B and G3306B Engines
Tool Operating Manual
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Systems Operation
Cylinder Block, Liners and Heads
G3304B and G3306B Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Testing and Adjusting
Engine Valve Lash - Inspect/Adjust
G3306B Petroleum Generator Set Engines
Disassembly and Assembly
Water Directors - Remove and Install
G3304B and G3306B Engines
Inlet and Exhaust Valves - Remove and Install
G3304B and G3306B Engines
Inlet and Exhaust Valve Guides - Remove and Install
G3304B and G3306B Engines
Inlet and Exhaust Valve Seat Inserts - Remove and Install
G3304B and G3306B Engines
Cylinder Head - Remove
G3304B and G3306B Engines
Cylinder Head - Install
G3304B and G3306B Engines
Camshaft Bearings - Remove and Install
G3304B and G3306B Engines
Service Magazine
Later Pre-Chamber Cylinder Heads On Early 3304 Engines Without Drilled Rocker Stands Are Used {1100}
2012/10/11
Operation and Maintenance Manual
Crankshaft Vibration Damper - Inspect
G3304B and G3306B Engines
Systems Operation
Vibration Damper
G3304B and G3306B Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Testing and Adjusting
Vibration Damper - Check
G3306B Petroleum Generator Set Engines
Disassembly and Assembly
Vibration Damper and Pulley - Remove
G3304B and G3306B Engines
Vibration Damper and Pulley - Install
G3304B and G3306B Engines
Accessory Drive - Remove and Install
G3304B and G3306B Engines
Accessory Drive - Disassemble
G3304B and G3306B Engines
Accessory Drive - Assemble
G3304B and G3306B Engines
Operation and Maintenance Manual
Fan Drive Bearing - Lubricate
G3304B and G3306B Engines
Engine News
Proper Storage Procedures Are Available For Commercial Engines {1000}
Proper Storage Procedures Are Available For Commercial Engines {1000}
Special Instruction
Oil and Your Engine {1000}
Oil and Your Engine {1000}
General Troubleshooting Guidelines For Nitrite Levels For Certain Gas Engines {0769, 1000, 1352, 1395}
General Troubleshooting Guidelines For Nitrite Levels For Certain Gas Engines {0769, 1000, 1352, 1395}
Service Magazine
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Reuse And Salvage Guidelines
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Specifications
Flywheel Housing
G3304B and G3306B Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Flywheel Assemblies {1156}
Reuse and Salvage for Flywheel Assemblies {1156}
Testing and Adjusting
Flywheel - Inspect
G3304B and G3306B Engines
Disassembly and Assembly
Flywheel - Remove and Install
G3304B and G3306B Engines
Specifications
Gear Group (Front)
G3304B and G3306B Engines
Systems Operation
Front Gear Group
G3304B and G3306B Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Disassembly and Assembly
Gear Group (Front) - Remove
G3304B and G3306B Engines
Gear Group (Front) - Install
G3304B and G3306B Engines
Specifications
Flywheel Housing
G3304B and G3306B Engines
Testing and Adjusting
Flywheel Housing - Inspect
G3306B Petroleum Generator Set Engines
Disassembly and Assembly
Flywheel Housing - Remove
G3304B and G3306B Engines
Flywheel Housing - Install
G3304B and G3306B Engines
Specifications
Crankshaft Wear Sleeves and Seals
G3304B and G3306B Engines
Housing (Front)
G3304B and G3306B Engines
Cover Group (Front Housing)
G3304B and G3306B Engines
Disassembly and Assembly
Housing (Front) - Remove
G3304B and G3306B Engines
Housing (Front) - Install
G3304B and G3306B Engines
Specifications
Engine Oil Pan
G3304B and G3306B Engines
Disassembly and Assembly
Engine Oil Pan - Remove
G3304B and G3306B Engines
Engine Oil Pan - Install
G3304B and G3306B Engines
Engine News
A New Connecting Rod Bearing is Available for Certain Commercial Engines {1219, 1225}
2012/08/15
Factory Inspection of Connecting Rods for New G3300 Engines {1225}
2013/03/13
Improved Connecting Rod Assemblies Are Now Used For Certain 3300 Series Gas and Diesel Commercial Engines {1225}
2013/07/22
Special Instruction
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR INSPECTING THE CYLINDER PACKS AND POSSIBLY CHANGE THE ENGINE OIL ON CERTAIN G3300 NATURALLY ASPIRATED ENGINES
PRODUCT SUPPORT PROGRAM FOR INSPECTING THE CYLINDER PACKS AND POSSIBLY CHANGE THE ENGINE OIL ON CERTAIN G3300 NATURALLY ASPIRATED ENGINES
Technical Information Bulletin
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Connecting Rods on Certain 3304 and 3306 Gas and Diesel Engines Have Failed{1225}
Connecting Rods on Certain 3304 and 3306 Gas and Diesel Engines Have Failed{1225}
Specifications
Connecting Rod
G3304B and G3306B Engines
Piston and Rings
G3304B and G3306B Engines
Tool Operating Manual
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
Systems Operation
Pistons, Rings and Connecting Rods
G3304B and G3306B Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Connecting Rods {1218}
Reuse and Salvage for Connecting Rods {1218}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Testing and Adjusting
Excessive Bearing Wear - Inspect
G3306B Petroleum Generator Set Engines
Connecting Rod Bearings - Inspect
G3306B Petroleum Generator Set Engines
Engine Crankcase Pressure (Blowby) - Test
G3306B Petroleum Generator Set Engines
Compression - Test
G3304B and G3306B Engines
Connecting Rod - Inspect
G3306B Petroleum Generator Set Engines
Cylinder Liner Projection - Inspect
G3304B and G3306B Engines
Disassembly and Assembly
Bearing Clearance - Check
G3304B and G3306B Engines
Piston and Connecting Rods - Remove
G3304B and G3306B Engines
Piston and Connecting Rods - Install
G3304B and G3306B Engines
Piston and Connecting Rods - Disassemble
G3304B and G3306B Engines
Piston and Connecting Rods - Assemble
G3304B and G3306B Engines
Operation and Maintenance Manual
Power Take-Off Clutch - Check
G3304B and G3306B Engines
Crankshaft Vibration Damper - Inspect
G3304B and G3306B Engines
Specifications
Crankshaft Pulley
G3304B and G3306B Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Disassembly and Assembly
Vibration Damper and Pulley - Remove
G3304B and G3306B Engines
Vibration Damper and Pulley - Install
G3304B and G3306B Engines
Special Instruction
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Technical Information Bulletin
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Tool Operating Manual
NEHS0566 <NOBR> 4C-9832</NOBR> Large Engine Roll-Over Stand {0599, 0701}
NEHS0566 4C-9832 Large Engine Roll-Over Stand {0599, 0701}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Reuse And Salvage Guidelines
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Testing and Adjusting
Service Tools
G3306B Petroleum Generator Set Engines
Service Magazine
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Operation and Maintenance Manual
Belts - Inspect/Adjust/Replace
G3304B and G3306B Engines
Specifications
Belt Tension Chart
G3304B and G3306B Engines
Engine News
A New Rock Arm Shaft Bracket Is Now Used for Certain G3306 Engines {1102}
A New Rock Arm Shaft Bracket Is Now Used for Certain G3306 Engines {1102}
Operation and Maintenance Manual
Engine Valve Rotators - Inspect
G3304B and G3306B Engines
Engine Valve Lash - Check
G3304B and G3306B Engines
Specifications
Valve Mechanism
G3304B and G3306B Engines
Valve Cover
G3304B and G3306B Engines
Reuse And Salvage Guidelines
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Testing and Adjusting
Engine Valve Lash - Inspect/Adjust
G3306B Petroleum Generator Set Engines
Finding Top Center Position for No. 1 Piston
G3304B and G3306B Engines
Troubleshooting
Valve Lash Is Excessive
G3306B Petroleum Generator Set Engines
Disassembly and Assembly
Valve Mechanism Cover - Remove and Install
G3304B and G3306B Engines
Rocker Shaft and Push Rod - Remove
G3304B and G3306B Engines
Rocker Shaft and Push Rod - Install
G3304B and G3306B Engines
Rocker Shaft - Disassemble
G3304B and G3306B Engines
Rocker Shaft - Assemble
G3304B and G3306B Engines
Valve Lifter - Remove
G3304B and G3306B Engines
Valve Lifter - Install
G3304B and G3306B Engines

Truck sale:

CATERPILLAR G3306B 2014
 
CATERPILLAR G3306B 2014
- STATIONARY - NATURAL GAS
WAGNER EQUIPMENT CO
United States
CATERPILLAR G3306B 2014
 
CATERPILLAR G3306B 2014
- STATIONARY - NATURAL GAS
WAGNER EQUIPMENT CO
United States
CATERPILLAR G3306B 2013
 
CATERPILLAR G3306B 2013
- STATIONARY - NATURAL GAS
WAGNER EQUIPMENT CO
United States
CATERPILLAR G3306B 2014
 
CATERPILLAR G3306B 2014
- STATIONARY - NATURAL GAS
WAGNER EQUIPMENT CO
United States
CATERPILLAR G3306B 2014
 
CATERPILLAR G3306B 2014
- STATIONARY - NATURAL GAS
WAGNER EQUIPMENT CO
United States
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.