AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

C175–16 Locomotive Generator Set R1X00001-UP BASIC ENGINE Caterpillar SIS



GENERATOR SET C175-16 GENERATOR SET R1X
 C175–16 Locomotive Generator Set R1X00001-UP SEBP4697 C175-16 R1X   (2012)

Parts group C175-16:

  For full view, you need register
BASIC ENGINE
BARRING GP
BARRING & MOUNTING GP
279-3473 BARRING & MOUNTING GP
279-3473 BARRING & MOUNTING GP -UPPER, RH
CAMSHAFT GP
CAMSHAFT GP
348-6914 CAMSHAFT GP
348-6914 CAMSHAFT GP -SINGLE
CAMSHAFT GP
488-3486 CAMSHAFT GP
488-3486 CAMSHAFT GP -SINGLE
S/N R1X114-UP
COUPLING GP
COUPLING GP-GENERATOR
304-7943 COUPLING GP-GENERATOR
304-7943 COUPLING GP-GENERATOR
PART OF 304-7915 GENERAL AR
ALSO AN ATTACHMENT
CRANKSHAFT GP
CRANKSHAFT GP
359-0939 CRANKSHAFT GP
359-0939 CRANKSHAFT GP
SEAL GP-CRANKSHAFT
248-4115 SEAL GP-CRANKSHAFT
248-4115 SEAL GP-CRANKSHAFT
CYLINDER BLOCK GP
COVER GP-CYLINDER BLOCK
366-0403 COVER GP-CYLINDER BLOCK
366-0403 COVER GP-CYLINDER BLOCK -EXPLOSION RELIEF
COVER GP-CYLINDER BLOCK
373-4118 COVER GP-CYLINDER BLOCK
373-4118 COVER GP-CYLINDER BLOCK -OIL GALLERY
CYLINDER BLOCK AS
370-4041 CYLINDER BLOCK AS
370-4041 CYLINDER BLOCK AS
PART OF 370-4042 CYLINDER BLOCK GP
CYLINDER BLOCK GP
370-4042 CYLINDER BLOCK GP
370-4042 CYLINDER BLOCK GP
LINER GP-CYLINDER BLOCK
317-6283 LINER GP-CYLINDER BLOCK
317-6283 LINER GP-CYLINDER BLOCK
PLUG GP-CYLINDER BLOCK
250-1792 PLUG GP-CYLINDER BLOCK
250-1792 PLUG GP-CYLINDER BLOCK -LUBRICATION SYSTEM
FOR USE WITH ENGINES WITHOUT OIL MIST DETECTOR
PLUG GP-CYLINDER BLOCK
250-9989 PLUG GP-CYLINDER BLOCK
250-9989 PLUG GP-CYLINDER BLOCK -LUBRICATION SYSTEM
PLUG GP-ENGINE
285-3938 PLUG GP-ENGINE
285-3938 PLUG GP-ENGINE -ETHER
CYLINDER HEAD GP
CYLINDER HEAD AS
328-7082 CYLINDER HEAD AS
328-7082 CYLINDER HEAD AS
PART OF 328-7083 CYLINDER HEAD GP
CYLINDER HEAD AS
517-4407 CYLINDER HEAD AS
517-4407 CYLINDER HEAD AS
PART OF 517-4408 CYLINDER HEAD GP
CYLINDER HEAD AS
543-8017 CYLINDER HEAD AS
543-8017 CYLINDER HEAD AS
PART OF 549-5757 CYLINDER HEAD GP
CYLINDER HEAD GP
328-7083 CYLINDER HEAD GP
328-7083 CYLINDER HEAD GP
PART OF 328-7084 CYLINDER HEAD GP
CYLINDER HEAD GP
328-7084 CYLINDER HEAD GP
328-7084 CYLINDER HEAD GP
Type 1
CYLINDER HEAD GP
328-7084 CYLINDER HEAD GP
328-7084 CYLINDER HEAD GP
Type 2
CYLINDER HEAD GP
328-7084 CYLINDER HEAD GP
328-7084 CYLINDER HEAD GP
Type 3
CYLINDER HEAD GP
517-4408 CYLINDER HEAD GP
517-4408 CYLINDER HEAD GP
PART OF 328-7084 CYLINDER HEAD GP
CYLINDER HEAD GP
549-5757 CYLINDER HEAD GP
549-5757 CYLINDER HEAD GP
PART OF 328-7084 CYLINDER HEAD GP
PLUG GP-ENGINE
285-3938 PLUG GP-ENGINE
285-3938 PLUG GP-ENGINE -ETHER
DAMPER GP
COVER GP-DAMPER GUARD
348-2177 COVER GP-DAMPER GUARD
348-2177 COVER GP-DAMPER GUARD
CANNOT BE USED WITH STUB SHAFT
DAMPER GP
391-5534 DAMPER GP
391-5534 DAMPER GP
PART OF 391-5535 DAMPER GP
DAMPER GP
391-5535 DAMPER GP
391-5535 DAMPER GP
FASTENER GP-DAMPER
364-3909 FASTENER GP-DAMPER
364-3909 FASTENER GP-DAMPER
GUARD GP-DAMPER
377-6217 GUARD GP-DAMPER
377-6217 GUARD GP-DAMPER
FLYWHEEL GP
FLYWHEEL GP
377-1503 FLYWHEEL GP
377-1503 FLYWHEEL GP
GEAR GP-REAR
327-0824 GEAR GP-REAR
327-0824 GEAR GP-REAR
GEAR GP
GEAR GP-FRONT
362-2905 GEAR GP-FRONT
362-2905 GEAR GP-FRONT
Type 1
GEAR GP-FRONT
362-2905 GEAR GP-FRONT
362-2905 GEAR GP-FRONT
Type 2
GEAR GP-REAR
327-0824 GEAR GP-REAR
327-0824 GEAR GP-REAR
HOUSING GP-FRONT
330-4461 HOUSING GP-FRONT
330-4461 HOUSING GP-FRONT
HOUSING GP-FLYWHEEL
COVER GP-FLYWHEEL HOUSING
392-1658 COVER GP-FLYWHEEL HOUSING
392-1658 COVER GP-FLYWHEEL HOUSING
FOR USE WITH ENGINES WITH REAR MOUNTED TURBOCHARGERS
HOUSING GP-FLYWHEEL
370-8623 HOUSING GP-FLYWHEEL
370-8623 HOUSING GP-FLYWHEEL
HOUSING GP-FRONT
COVER GP-FRONT HOUSING
254-5899 COVER GP-FRONT HOUSING
254-5899 COVER GP-FRONT HOUSING
GEAR GP-FRONT
362-2905 GEAR GP-FRONT
362-2905 GEAR GP-FRONT
Type 1
GEAR GP-FRONT
362-2905 GEAR GP-FRONT
362-2905 GEAR GP-FRONT
Type 2
HOUSING GP-FRONT
330-4461 HOUSING GP-FRONT
330-4461 HOUSING GP-FRONT
LIFTING GP-ENGINE
COVER GP-ENGINE LIFTING EYE
283-9369 COVER GP-ENGINE LIFTING EYE
283-9369 COVER GP-ENGINE LIFTING EYE
LIFTING GP-ENGINE
283-9331 LIFTING GP-ENGINE
283-9331 LIFTING GP-ENGINE -ENGINE MOUNTED
MOUNTING GP-ENGINE
KIT-DOWEL
423-0349 KIT-DOWEL
423-0349 KIT-DOWEL
FOR USE WITH GEN I FLYWHEELS TO FIT TO GEN II CRANKSHAFTS
FIELD INSTALLATION
KIT-DOWEL
423-0350 KIT-DOWEL
423-0350 KIT-DOWEL
FOR USE WITH GEN I GEARS TO FIT TO GEN II CRANKSHAFTS
FIELD INSTALLATION
MOUNTING GP-ENGINE
7E-9770 MOUNTING GP-ENGINE
7E-9770 MOUNTING GP-ENGINE
AN ATTACHMENT
PAN GP-OIL
DRAIN GP-ENGINE OIL
254-2064 DRAIN GP-ENGINE OIL
254-2064 DRAIN GP-ENGINE OIL
PAN GP-OIL
323-9996 PAN GP-OIL
323-9996 PAN GP-OIL
PART OF 324-0019 PAN GP-OIL
PAN GP-OIL
324-0019 PAN GP-OIL
324-0019 PAN GP-OIL
PART OF 324-0020 PAN GP-OIL
PAN GP-OIL
324-0020 PAN GP-OIL
324-0020 PAN GP-OIL
PARTS GP-MISCELLANEOUS
COVER GP-ENGINE
347-6645 COVER GP-ENGINE
347-6645 COVER GP-ENGINE -OIL PUMP
FOR USE WITH ENGINE W/O ALTERNATOR DRIVE
PISTON & ROD GP
CONNECTING ROD GP
377-9943 CONNECTING ROD GP
377-9943 CONNECTING ROD GP
S/N R1X1-113
FOR USE WITH ODD CYLINDER
CONNECTING ROD GP
377-9944 CONNECTING ROD GP
377-9944 CONNECTING ROD GP
S/N R1X1-113
FOR USE WITH EVEN CYLINDER
CONNECTING ROD GP
434-0486 CONNECTING ROD GP
434-0486 CONNECTING ROD GP
S/N R1X114-UP
PART OF 434-0488, 434-0490, 434-0492 CONNECTING ROD GP
FIELD REPLACEMENT ORDER @@@@@434-0488@@@@@
FOR USE WITH EVEN CYLINDER
CONNECTING ROD GP
434-0487 CONNECTING ROD GP
434-0487 CONNECTING ROD GP
S/N R1X114-UP
PART OF 434-0489, 434-0491, 434-0493 CONNECTING ROD GP
FIELD REPLACEMENT ORDER @@@@@434-0489@@@@@
FOR USE WITH ODD CYLINDER
CONNECTING ROD GP
434-0488 CONNECTING ROD GP
434-0488 CONNECTING ROD GP
S/N R1X114-UP
FIELD REPLACEMENT FOR @@@@@434-0486@@@@@
FOR USE WITH EVEN CYLINDER
CONNECTING ROD GP
434-0489 CONNECTING ROD GP
434-0489 CONNECTING ROD GP
S/N R1X114-UP
FIELD REPLACEMENT FOR @@@@@434-0487@@@@@
FOR USE WITH ODD CYLINDER
CONNECTING ROD GP
434-0490 CONNECTING ROD GP
434-0490 CONNECTING ROD GP -LH
S/N R1X114-UP
FOR USE WITH EVEN CYLINDERS
CONNECTING ROD GP
434-0491 CONNECTING ROD GP
434-0491 CONNECTING ROD GP -RH
S/N R1X114-UP
FOR USE WITH ODD CYLINDERS
CONNECTING ROD GP
434-0492 CONNECTING ROD GP
434-0492 CONNECTING ROD GP
S/N R1X114-UP
FOR USE WITH EVEN CYLINDER
CONNECTING ROD GP
434-0493 CONNECTING ROD GP
434-0493 CONNECTING ROD GP
S/N R1X114-UP
FOR USE WITH ODD CYLINDER
PISTON GP
307-4407 PISTON GP
307-4407 PISTON GP
VALVE MECHANISM GP
COVER GP-VALVE MECHANISM
366-6716 COVER GP-VALVE MECHANISM
366-6716 COVER GP-VALVE MECHANISM
Type 1
COVER GP-VALVE MECHANISM
366-6716 COVER GP-VALVE MECHANISM
366-6716 COVER GP-VALVE MECHANISM
Type 2
LIFTER GP-VALVE
357-4826 LIFTER GP-VALVE
357-4826 LIFTER GP-VALVE
LIFTER GP-VALVE
397-4038 LIFTER GP-VALVE
397-4038 LIFTER GP-VALVE
PART OF 357-4826 LIFTER GP-VALVE
VALVE MECHANISM GP
325-2666 VALVE MECHANISM GP
325-2666 VALVE MECHANISM GP
PLATE GP-ENGINE IDENTIFICATION
315-5611 PLATE GP-ENGINE IDENTIFICATION
315-5611 PLATE GP-ENGINE IDENTIFICATION

Information:

(For parts list, see above)

Engine News
New Camshafts and Lifter Levers Are Used For Certain C175 Commercial Engines {1209, 1210}
New Camshafts and Lifter Levers Are Used For Certain C175 Commercial Engines {1209, 1210}
Specifications
Camshaft
C175-16 Marine Engine
Systems Operation
Camshaft
C175-16 Locomotive Engine
Reuse And Salvage Guidelines
Reuse and Salvage for Camshafts {1210, 1210}
Reuse and Salvage for Camshafts {1210, 1210}
Testing and Adjusting
Camshaft Timing
C175-16 Locomotive Engine
Disassembly and Assembly
Camshaft - Remove
C175-16 Locomotive Engine
Camshaft Bearings - Remove
C175-16 Locomotive Engine
Camshaft Bearings - Install
C175-16 Locomotive Engine
Camshaft - Install
C175-16 Locomotive Engine
Engine News
New Seal Kits Are Available to Service the Flexible Generator Couplings Used on Certain C175-16 Locomotive and Petroleum Engines {3252}
2013/10/28
Operation and Maintenance Manual
Driven Equipment - Inspect/Replace/Lubricate
C175-16 Engine
Driven Equipment - Check
C175-16 Engine
Special Instruction
Guidelines for Servicing Flexible Couplings on Certain C175-16 Locomotive and Petroleum Engines{3252}
Guidelines for Servicing Flexible Couplings on Certain C175-16 Locomotive and Petroleum Engines{3252}
Specifications
Generator Coupling
C175-16 Marine Engine
Engine News
A New Front Crankshaft Seal Is Now Used on Certain C175 Engines {1160, 1161, 7555}
2014/08/08
A New Rear Crankshaft Seal Is Now Used on Certain C175 Engines {1160, 1161}
2014/11/14
Improved Protective Packaging is Now Available for Certain C175 Crankshaft Counterweight Bolts {1202, 795C}
Improved Protective Packaging is Now Available for Certain C175 Crankshaft Counterweight Bolts {1202, 795C}
New Preservation Process for Crankshafts is Now Used for 3500, G3500, and C175-16 Series Engines {1202}
New Preservation Process for Crankshafts is Now Used for 3500, G3500, and C175-16 Series Engines {1202}
Operation and Maintenance Manual
Crankshaft Vibration Damper - Inspect - Oil Supplied Damper
C175-16 Engine
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR UPDATING THE CRANKSHAFT, CRANKSHAFT DOWELS, DAMPER ADAPTER, AND DAMPER AT OVERHAUL ON CERTAIN C175-16 GENERATOR SETS AND LOCOMOTIVE ENGINES
PRODUCT SUPPORT PROGRAM FOR UPDATING THE CRANKSHAFT, CRANKSHAFT DOWELS, DAMPER ADAPTER, AND DAMPER AT OVERHAUL ON CERTAIN C175-16 GENERATOR SETS AND LOCOMOTIVE ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 245-3575 REAR CRANKSHAFT SEALS IN DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 245-3575 REAR CRANKSHAFT SEALS IN DEALER PARTS STOCK
Service Letter-Australia
PRODUCT SUPPORT PROGRAM FOR UPDATING THE CRANKSHAFT, CRANKSHAFT DOWELS, DAMPER ADAPTER, AND DAMPER AT OVERHAUL ON CERTAIN C175-16 GENERATOR SETS AND LOCOMOTIVE ENGINES
PRODUCT SUPPORT PROGRAM FOR UPDATING THE CRANKSHAFT, CRANKSHAFT DOWELS, DAMPER ADAPTER, AND DAMPER AT OVERHAUL ON CERTAIN C175-16 GENERATOR SETS AND LOCOMOTIVE ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 245-3575 REAR CRANKSHAFT SEALS IN DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 245-3575 REAR CRANKSHAFT SEALS IN DEALER PARTS STOCK
Service Letter-CFEL
PRODUCT SUPPORT PROGRAM FOR UPDATING THE CRANKSHAFT, CRANKSHAFT DOWELS, DAMPER ADAPTER, AND DAMPER AT OVERHAUL ON CERTAIN C175-16 GENERATOR SETS AND LOCOMOTIVE ENGINES
PRODUCT SUPPORT PROGRAM FOR UPDATING THE CRANKSHAFT, CRANKSHAFT DOWELS, DAMPER ADAPTER, AND DAMPER AT OVERHAUL ON CERTAIN C175-16 GENERATOR SETS AND LOCOMOTIVE ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 245-3575 REAR CRANKSHAFT SEALS IN DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 245-3575 REAR CRANKSHAFT SEALS IN DEALER PARTS STOCK
Service Letter-CSARL
PRODUCT SUPPORT PROGRAM FOR UPDATING THE CRANKSHAFT, CRANKSHAFT DOWELS, DAMPER ADAPTER, AND DAMPER AT OVERHAUL ON CERTAIN C175-16 GENERATOR SETS AND LOCOMOTIVE ENGINES
PRODUCT SUPPORT PROGRAM FOR UPDATING THE CRANKSHAFT, CRANKSHAFT DOWELS, DAMPER ADAPTER, AND DAMPER AT OVERHAUL ON CERTAIN C175-16 GENERATOR SETS AND LOCOMOTIVE ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 245-3575 REAR CRANKSHAFT SEALS IN DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 245-3575 REAR CRANKSHAFT SEALS IN DEALER PARTS STOCK
Service Letter-Americas
PRODUCT SUPPORT PROGRAM FOR UPDATING THE CRANKSHAFT, CRANKSHAFT DOWELS, DAMPER ADAPTER, AND DAMPER AT OVERHAUL ON CERTAIN C175-16 GENERATOR SETS AND LOCOMOTIVE ENGINES
PRODUCT SUPPORT PROGRAM FOR UPDATING THE CRANKSHAFT, CRANKSHAFT DOWELS, DAMPER ADAPTER, AND DAMPER AT OVERHAUL ON CERTAIN C175-16 GENERATOR SETS AND LOCOMOTIVE ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 245-3575 REAR CRANKSHAFT SEALS IN DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 245-3575 REAR CRANKSHAFT SEALS IN DEALER PARTS STOCK
Specifications
Crankshaft Wear Sleeves and Seals
C175-16 Marine Engine
Connecting Rod and Main Bearing Journals - Type 2
C175-16 Marine Engine
Crankshaft - Type 2
C175-16 Marine Engine
Tool Operating Manual
424-8895 C175 Crankshaft Lifting Tool{0599, 0629, 0632, 1202}
424-8895 C175 Crankshaft Lifting Tool{0599, 0629, 0632, 1202}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR UPDATING THE CRANKSHAFT, CRANKSHAFT DOWELS, DAMPER ADAPTER, AND DAMPER AT OVERHAUL ON CERTAIN C175-16 GENERATOR SETS AND LOCOMOTIVE ENGINES
PRODUCT SUPPORT PROGRAM FOR UPDATING THE CRANKSHAFT, CRANKSHAFT DOWELS, DAMPER ADAPTER, AND DAMPER AT OVERHAUL ON CERTAIN C175-16 GENERATOR SETS AND LOCOMOTIVE ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 245-3575 REAR CRANKSHAFT SEALS IN DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 245-3575 REAR CRANKSHAFT SEALS IN DEALER PARTS STOCK
Service Letter-Asia
PRODUCT SUPPORT PROGRAM FOR UPDATING THE CRANKSHAFT, CRANKSHAFT DOWELS, DAMPER ADAPTER, AND DAMPER AT OVERHAUL ON CERTAIN C175-16 GENERATOR SETS AND LOCOMOTIVE ENGINES
PRODUCT SUPPORT PROGRAM FOR UPDATING THE CRANKSHAFT, CRANKSHAFT DOWELS, DAMPER ADAPTER, AND DAMPER AT OVERHAUL ON CERTAIN C175-16 GENERATOR SETS AND LOCOMOTIVE ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 245-3575 REAR CRANKSHAFT SEALS IN DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 245-3575 REAR CRANKSHAFT SEALS IN DEALER PARTS STOCK
Systems Operation
Crankshaft
C175-16 Locomotive Engine
Reuse And Salvage Guidelines
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR UPDATING THE CRANKSHAFT, CRANKSHAFT DOWELS, DAMPER ADAPTER, AND DAMPER AT OVERHAUL ON CERTAIN C175-16 GENERATOR SETS AND LOCOMOTIVE ENGINES
PRODUCT SUPPORT PROGRAM FOR UPDATING THE CRANKSHAFT, CRANKSHAFT DOWELS, DAMPER ADAPTER, AND DAMPER AT OVERHAUL ON CERTAIN C175-16 GENERATOR SETS AND LOCOMOTIVE ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 245-3575 REAR CRANKSHAFT SEALS IN DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 245-3575 REAR CRANKSHAFT SEALS IN DEALER PARTS STOCK
Testing and Adjusting
Crankshaft Position for Valve Lash Setting
C175-16 Locomotive Engine
Disassembly and Assembly
Crankshaft Front Seal - Remove
C175-16 Locomotive Engine
Crankshaft Front Seal - Install
C175-16 Locomotive Engine
Crankshaft Rear Seal - Remove
C175-16 Locomotive Engine
Crankshaft Rear Seal - Install
C175-16 Locomotive Engine
Bearing Clearance - Check
C175-16 Locomotive Engine
Crankshaft Main Bearings - Remove
C175-16 Locomotive Engine
Crankshaft Main Bearings - Install
C175-16 Locomotive Engine
Crankshaft - Remove
C175-16 Locomotive Engine
Crankshaft - Install
C175-16 Locomotive Engine
Service Magazine
New Preservation Process for Crankshafts is Now Used for 3500, G3500, and C175-16 Series Engines {1202}
New Preservation Process for Crankshafts is Now Used for 3500, G3500, and C175-16 Series Engines {1202}
Engine News
A New Top O-Ring Seal Is Used on the Cylinder Liner in C175-16 and C175-20 Engines {1201, 1216, 7555}
A New Top O-Ring Seal Is Used on the Cylinder Liner in C175-16 and C175-20 Engines {1201, 1216, 7555}
A New Cylinder Head to Cylinder Block Oil Feed Dowel Is Now Used For C175 Commercial Engines {1201}
A New Cylinder Head to Cylinder Block Oil Feed Dowel Is Now Used For C175 Commercial Engines {1201}
Special Instruction
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Installation of the 422-9537 Repair Kit {1233}
Installation of the 422-9537 Repair Kit {1233}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Specifications
Piston and Rings
C175-16 Marine Engine
Connecting Rod - Type 1
C175-16 Marine Engine
Cylinder Liner
C175-16 Marine Engine
Cylinder Block - Type 2
C175-16 Marine Engine
Connecting Rod - Type 2
C175-16 Marine Engine
Tool Operating Manual
420-9053 C175 Cylinder Block Lifting Tool{0599, 0629, 0632, 0705, 1201}
420-9053 C175 Cylinder Block Lifting Tool{0599, 0629, 0632, 0705, 1201}
Systems Operation
Cylinder Block, Liners and Heads
C175-16 Locomotive Engine
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Reuse and Salvage for C175 Engine Cylinder Blocks {1201}
Reuse and Salvage for C175 Engine Cylinder Blocks {1201}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Information Release Memo
CAT&reg; REMAN ANNOUNCES THE RELEASE OF REMAN UPGRADE-TO-NEW (UTN) BARE BLOCKS FOR C175-16 AND C175-20 APPLICATIONS
CAT® REMAN ANNOUNCES THE RELEASE OF REMAN UPGRADE-TO-NEW (UTN) BARE BLOCKS FOR C175-16 AND C175-20 APPLICATIONS
Testing and Adjusting
Cylinder Block
C175-16 Locomotive Engine
Troubleshooting
Crankcase Pressure Is High
C175-16 Locomotive Engine
Disassembly and Assembly
Crankshaft Front Seal - Remove
C175-16 Locomotive Engine
Crankshaft Front Seal - Install
C175-16 Locomotive Engine
Crankshaft Rear Seal - Remove
C175-16 Locomotive Engine
Crankshaft Rear Seal - Install
C175-16 Locomotive Engine
Piston Cooling Jets - Remove and Install
C175-16 Locomotive Engine
Bearing Clearance - Check
C175-16 Locomotive Engine
Connecting Rod Bearings - Remove and Install
C175-16 Locomotive Engine
Crankshaft Main Bearings - Remove
C175-16 Locomotive Engine
Crankshaft Main Bearings - Install
C175-16 Locomotive Engine
Pistons, Liners, and Connecting Rods - Remove
C175-16 Locomotive Engine
Pistons, Liners, and Connecting Rods - Install
C175-16 Locomotive Engine
Camshaft Bearings - Remove
C175-16 Locomotive Engine
Camshaft Bearings - Install
C175-16 Locomotive Engine
Engine News
A Cylinder Head Bolt Alignment Sleeve is Available for C175 Engines {1100}
A Cylinder Head Bolt Alignment Sleeve is Available for C175 Engines {1100}
Special Instruction
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
New Cylinder Head and Head Gasket Leak Test Procedure Available for C175 Engines {1100, 1100}
New Cylinder Head and Head Gasket Leak Test Procedure Available for C175 Engines {1100, 1100}
Use of the <NOBR>370-8028</NOBR> Integral Seal and the <NOBR>394-0295</NOBR> Integral Seal {1100}
Use of the 370-8028 Integral Seal and the 394-0295 Integral Seal {1100}
Procedure to Measure Valve Recession for C175 Engines {0759, 0760, 1100, 1105}
Procedure to Measure Valve Recession for C175 Engines {0759, 0760, 1100, 1105}
Technical Information Bulletin
C175 Commercial Engine Intake Valve Recession {1100}
C175 Commercial Engine Intake Valve Recession {1100}
Inspect C175 Cylinder Heads for Missing Valve Stem Retainers {1100}
Inspect C175 Cylinder Heads for Missing Valve Stem Retainers {1100}
Specifications
Cylinder Head Valves
C175-16 Marine Engine
Cylinder Head
C175-16 Marine Engine
Tool Operating Manual
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
Systems Operation
Cylinder Block, Liners and Heads
C175-16 Locomotive Engine
Reuse And Salvage Guidelines
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Information Release Memo
CAT REMAN ANNOUNCES ADDITION OF C175 CYLINDER HEAD OPTION FOR OFF-HIGHWAY TRUCK APPLICATIONS
CAT REMAN ANNOUNCES ADDITION OF C175 CYLINDER HEAD OPTION FOR OFF-HIGHWAY TRUCK APPLICATIONS
Testing and Adjusting
Valve Lash - Adjust
C175-16 Locomotive Engine
Cylinder Head
C175-16 Locomotive Engine
Disassembly and Assembly
Inlet and Exhaust Valve Seat Inserts - Remove and Install
C175-16 Locomotive Engine
Electronic Unit Injector Sleeve - Remove
C175-16 Locomotive Engine
Electronic Unit Injector Sleeve - Install
C175-16 Locomotive Engine
Cylinder Head - Remove
C175-16 Locomotive Engine
Cylinder Head - Install
C175-16 Locomotive Engine
Inlet and Exhaust Valve Springs - Remove and Install
C175-16 Locomotive Engine
Inlet and Exhaust Valves - Remove and Install
C175-16 Locomotive Engine
Inlet and Exhaust Valve Guides - Remove and Install
C175-16 Locomotive Engine
Inlet Valve Seals - Remove and Install
C175-16 Locomotive Engine
Engine News
An Improved Damper Group Is Used on Certain C175 Marine, Petroleum, and Locomotive Engines {1205}
2014/10/10
Operation and Maintenance Manual
Crankshaft Vibration Damper - Inspect - Oil Supplied Damper
C175-16 Engine
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR UPDATING THE CRANKSHAFT, CRANKSHAFT DOWELS, DAMPER ADAPTER, AND DAMPER AT OVERHAUL ON CERTAIN C175-16 GENERATOR SETS AND LOCOMOTIVE ENGINES
PRODUCT SUPPORT PROGRAM FOR UPDATING THE CRANKSHAFT, CRANKSHAFT DOWELS, DAMPER ADAPTER, AND DAMPER AT OVERHAUL ON CERTAIN C175-16 GENERATOR SETS AND LOCOMOTIVE ENGINES
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
Damper Fluid Kits Are not Available Outside of the United States {1205}
Damper Fluid Kits Are not Available Outside of the United States {1205}
Specifications
Fastener Group (Vibration Damper)
C175-16 Marine Engine
Vibration Damper
C175-16 Marine Engine
Vibration Damper Guard
C175-16 Marine Engine
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR UPDATING THE CRANKSHAFT, CRANKSHAFT DOWELS, DAMPER ADAPTER, AND DAMPER AT OVERHAUL ON CERTAIN C175-16 GENERATOR SETS AND LOCOMOTIVE ENGINES
PRODUCT SUPPORT PROGRAM FOR UPDATING THE CRANKSHAFT, CRANKSHAFT DOWELS, DAMPER ADAPTER, AND DAMPER AT OVERHAUL ON CERTAIN C175-16 GENERATOR SETS AND LOCOMOTIVE ENGINES
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR UPDATING THE CRANKSHAFT, CRANKSHAFT DOWELS, DAMPER ADAPTER, AND DAMPER AT OVERHAUL ON CERTAIN C175-16 GENERATOR SETS AND LOCOMOTIVE ENGINES
PRODUCT SUPPORT PROGRAM FOR UPDATING THE CRANKSHAFT, CRANKSHAFT DOWELS, DAMPER ADAPTER, AND DAMPER AT OVERHAUL ON CERTAIN C175-16 GENERATOR SETS AND LOCOMOTIVE ENGINES
Testing and Adjusting
Vibration Damper
C175-16 Locomotive Engine
Disassembly and Assembly
Vibration Damper - Remove and Install
C175-16 Locomotive Engine
Special Instruction
High-Pressure Fuel Pump Adapter and Front Gear Inspection for Certain C175&ndash;16 and C175&ndash;20 Engines {1242, 125H}
High-Pressure Fuel Pump Adapter and Front Gear Inspection for Certain C175–16 and C175–20 Engines {1242, 125H}
Disassembly and Assembly
Fuel and Auxiliary Water Pump Drive - Remove and Install
C175-16 Locomotive Engine
Engine Oil and Water Pump Drive - Remove
C175-16 Locomotive Engine
Engine Oil and Water Pump Drive - Disassemble
C175-16 Locomotive Engine
Engine Oil and Water Pump Drive - Assemble
C175-16 Locomotive Engine
Engine Oil and Water Pump Drive - Install
C175-16 Locomotive Engine
Special Instruction
Oil and Your Engine {1000}
Oil and Your Engine {1000}
Tool Operating Manual
M0074900: 509-7382 Locomotive Tooling Lifting Group C175-20 {0374, 0599, 0629, 0632, 0700, 0701}
M0074900: 509-7382 Locomotive Tooling Lifting Group C175-20 {0374, 0599, 0629, 0632, 0700, 0701}
Service Magazine
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Reuse And Salvage Guidelines
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Specifications
Flywheel
C175-16 Marine Engine
Reuse And Salvage Guidelines
Reuse and Salvage for Flywheel Assemblies {1156}
Reuse and Salvage for Flywheel Assemblies {1156}
Testing and Adjusting
Flywheel - Inspect
C175-16 Locomotive Engine
Disassembly and Assembly
Flywheel - Remove and Install
C175-16 Locomotive Engine
Engine News
A New Oil Screen is Used on the High-Pressure Fuel Pump Adapter on C175 Engines {1151, 1162, 1206}
2013/10/03
A New High-Pressure Fuel Pump Adapter Is Now Used on Certain C175 Commercial Engines {125H}
A New High-Pressure Fuel Pump Adapter Is Now Used on Certain C175 Commercial Engines {125H}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR INSTALLING A HIGH PRESSURE FUEL PUMP OIL RETURN SCREEN ON CERTAIN C175-16 LOCOMOTIVE ENGINES
PRODUCT SUPPORT PROGRAM FOR INSTALLING A HIGH PRESSURE FUEL PUMP OIL RETURN SCREEN ON CERTAIN C175-16 LOCOMOTIVE ENGINES
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Specifications
Gear Group (Rear)
C175-16 Marine Engine
Gear Group (Front)
C175-16 Marine Engine
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR INSTALLING A HIGH PRESSURE FUEL PUMP OIL RETURN SCREEN ON CERTAIN C175-16 LOCOMOTIVE ENGINES
PRODUCT SUPPORT PROGRAM FOR INSTALLING A HIGH PRESSURE FUEL PUMP OIL RETURN SCREEN ON CERTAIN C175-16 LOCOMOTIVE ENGINES
Service Letter-Asia
Reuse And Salvage Guidelines
Procedure to Inspect the High-Pressure Fuel Pump Adapter on C175 Engines {0374, 0599, 0701, 1151, 1162, 1206}
Procedure to Inspect the High-Pressure Fuel Pump Adapter on C175 Engines {0374, 0599, 0701, 1151, 1162, 1206}
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR INSTALLING A HIGH PRESSURE FUEL PUMP OIL RETURN SCREEN ON CERTAIN C175-16 LOCOMOTIVE ENGINES
PRODUCT SUPPORT PROGRAM FOR INSTALLING A HIGH PRESSURE FUEL PUMP OIL RETURN SCREEN ON CERTAIN C175-16 LOCOMOTIVE ENGINES
Disassembly and Assembly
Idler Gears (Front) - Remove and Install
C175-16 Locomotive Engine
Gear Group (Rear) - Remove
C175-16 Locomotive Engine
Gear Group (Rear) - Install
C175-16 Locomotive Engine
Specifications
Flywheel Housing
C175-16 Marine Engine
Flywheel Housing Cover
C175-16 Marine Engine
Testing and Adjusting
Flywheel Housing - Inspect
C175-16 Locomotive Engine
Disassembly and Assembly
Flywheel Housing - Install
C175-16 Locomotive Engine
Engine News
A New Oil Screen is Used on the High-Pressure Fuel Pump Adapter on C175 Engines {1151, 1162, 1206}
2013/10/03
Specifications
Housing (Front)
C175-16 Marine Engine
Reuse And Salvage Guidelines
Procedure to Inspect the High-Pressure Fuel Pump Adapter on C175 Engines {0374, 0599, 0701, 1151, 1162, 1206}
Procedure to Inspect the High-Pressure Fuel Pump Adapter on C175 Engines {0374, 0599, 0701, 1151, 1162, 1206}
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Disassembly and Assembly
Front Drive Housing - Remove and Install
C175-16 Locomotive Engine
Technical Information Bulletin
C175 Lifter Shaft and Lifter Cover Reuse Guide {1209}
C175 Lifter Shaft and Lifter Cover Reuse Guide {1209}
Operation and Maintenance Manual
Engine Mounts - Check
C175-16 Engine
Special Instruction
Installation Instruction for the <NOBR>394-4550</NOBR> Engine Oil Filter Element for C175 Engines {1302}
Installation Instruction for the 394-4550 Engine Oil Filter Element for C175 Engines {1302}
Specifications
Engine Oil Pan
C175-16 Marine Engine
Reuse And Salvage Guidelines
Reuse and Salvage for 3500, 3600 & C175 Engine Oil Pans {1302}
Reuse and Salvage for 3500, 3600 & C175 Engine Oil Pans {1302}
Disassembly and Assembly
Engine Oil Pan - Remove
C175-16 Locomotive Engine
Engine Oil Pan - Disassemble
C175-16 Locomotive Engine
Engine Oil Pan - Assemble
C175-16 Locomotive Engine
Engine Oil Pan - Install
C175-16 Locomotive Engine
Engine News
New Connecting Rod Bolts Are Used for C175 Engines {1218}
2013/07/17
Cat<SUP>&reg;</SUP> Reman Announces the Availability of Type 2 Cylinder Packs and Connecting Rods for Certain C175 Engines {1218, 1239}
2014/10/31
An Improved Procedure Is Now Available For Measuring C175 Connecting Rods {0701, 1218}
An Improved Procedure Is Now Available For Measuring C175 Connecting Rods {0701, 1218}
Special Instruction
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE CONNECTING ROD BEARINGS ON CERTAIN C175-16 GENERATOR SETS AND LOCOMOTIVE ENGINES OPERATING AT 1800 RPM ENGINE SPEED
PRODUCT SUPPORT PROGRAM FOR REPLACING THE CONNECTING ROD BEARINGS ON CERTAIN C175-16 GENERATOR SETS AND LOCOMOTIVE ENGINES OPERATING AT 1800 RPM ENGINE SPEED
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REWORKING THE DRILLED OIL PASSAGE ON CERTAIN CONNECTING RODS AND CYLINDER PACKS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REWORKING THE DRILLED OIL PASSAGE ON CERTAIN CONNECTING RODS AND CYLINDER PACKS
Service Letter-Australia
PRODUCT SUPPORT PROGRAM FOR REPLACING THE CONNECTING ROD BEARINGS ON CERTAIN C175-16 GENERATOR SETS AND LOCOMOTIVE ENGINES OPERATING AT 1800 RPM ENGINE SPEED
PRODUCT SUPPORT PROGRAM FOR REPLACING THE CONNECTING ROD BEARINGS ON CERTAIN C175-16 GENERATOR SETS AND LOCOMOTIVE ENGINES OPERATING AT 1800 RPM ENGINE SPEED
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REWORKING THE DRILLED OIL PASSAGE ON CERTAIN CONNECTING RODS AND CYLINDER PACKS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REWORKING THE DRILLED OIL PASSAGE ON CERTAIN CONNECTING RODS AND CYLINDER PACKS
Service Letter-CFEL
PRODUCT SUPPORT PROGRAM FOR REPLACING THE CONNECTING ROD BEARINGS ON CERTAIN C175-16 GENERATOR SETS AND LOCOMOTIVE ENGINES OPERATING AT 1800 RPM ENGINE SPEED
PRODUCT SUPPORT PROGRAM FOR REPLACING THE CONNECTING ROD BEARINGS ON CERTAIN C175-16 GENERATOR SETS AND LOCOMOTIVE ENGINES OPERATING AT 1800 RPM ENGINE SPEED
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REWORKING THE DRILLED OIL PASSAGE ON CERTAIN CONNECTING RODS AND CYLINDER PACKS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REWORKING THE DRILLED OIL PASSAGE ON CERTAIN CONNECTING RODS AND CYLINDER PACKS
Service Letter-CSARL
PRODUCT SUPPORT PROGRAM FOR REPLACING THE CONNECTING ROD BEARINGS ON CERTAIN C175-16 GENERATOR SETS AND LOCOMOTIVE ENGINES OPERATING AT 1800 RPM ENGINE SPEED
PRODUCT SUPPORT PROGRAM FOR REPLACING THE CONNECTING ROD BEARINGS ON CERTAIN C175-16 GENERATOR SETS AND LOCOMOTIVE ENGINES OPERATING AT 1800 RPM ENGINE SPEED
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REWORKING THE DRILLED OIL PASSAGE ON CERTAIN CONNECTING RODS AND CYLINDER PACKS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REWORKING THE DRILLED OIL PASSAGE ON CERTAIN CONNECTING RODS AND CYLINDER PACKS
Service Letter-Americas
PRODUCT SUPPORT PROGRAM FOR REPLACING THE CONNECTING ROD BEARINGS ON CERTAIN C175-16 GENERATOR SETS AND LOCOMOTIVE ENGINES OPERATING AT 1800 RPM ENGINE SPEED
PRODUCT SUPPORT PROGRAM FOR REPLACING THE CONNECTING ROD BEARINGS ON CERTAIN C175-16 GENERATOR SETS AND LOCOMOTIVE ENGINES OPERATING AT 1800 RPM ENGINE SPEED
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REWORKING THE DRILLED OIL PASSAGE ON CERTAIN CONNECTING RODS AND CYLINDER PACKS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REWORKING THE DRILLED OIL PASSAGE ON CERTAIN CONNECTING RODS AND CYLINDER PACKS
Technical Information Bulletin
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
New Connecting Rod Bolts Are Available for C175 Engines{1218, 7553}
New Connecting Rod Bolts Are Available for C175 Engines{1218, 7553}
C175 Connecting Rod Guide Usage Clarification{1218}
C175 Connecting Rod Guide Usage Clarification{1218}
Inspect Inventory Stock of C175 and 3500HD Connecting Rods for Contamination {1225}
Inspect Inventory Stock of C175 and 3500HD Connecting Rods for Contamination {1225}
Specifications
Piston and Rings
C175-16 Marine Engine
Connecting Rod - Type 1
C175-16 Marine Engine
Connecting Rod - Type 2
C175-16 Marine Engine
Tool Operating Manual
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING THE CONNECTING ROD BEARINGS ON CERTAIN C175-16 GENERATOR SETS AND LOCOMOTIVE ENGINES OPERATING AT 1800 RPM ENGINE SPEED
PRODUCT SUPPORT PROGRAM FOR REPLACING THE CONNECTING ROD BEARINGS ON CERTAIN C175-16 GENERATOR SETS AND LOCOMOTIVE ENGINES OPERATING AT 1800 RPM ENGINE SPEED
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REWORKING THE DRILLED OIL PASSAGE ON CERTAIN CONNECTING RODS AND CYLINDER PACKS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REWORKING THE DRILLED OIL PASSAGE ON CERTAIN CONNECTING RODS AND CYLINDER PACKS
Service Letter-Asia
PRODUCT SUPPORT PROGRAM FOR REPLACING THE CONNECTING ROD BEARINGS ON CERTAIN C175-16 GENERATOR SETS AND LOCOMOTIVE ENGINES OPERATING AT 1800 RPM ENGINE SPEED
PRODUCT SUPPORT PROGRAM FOR REPLACING THE CONNECTING ROD BEARINGS ON CERTAIN C175-16 GENERATOR SETS AND LOCOMOTIVE ENGINES OPERATING AT 1800 RPM ENGINE SPEED
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REWORKING THE DRILLED OIL PASSAGE ON CERTAIN CONNECTING RODS AND CYLINDER PACKS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REWORKING THE DRILLED OIL PASSAGE ON CERTAIN CONNECTING RODS AND CYLINDER PACKS
Systems Operation
Pistons, Rings and Connecting Rods
C175-16 Locomotive Engine
Reuse And Salvage Guidelines
Reuse and Salvage for Connecting Rods {1218}
Reuse and Salvage for Connecting Rods {1218}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE CONNECTING ROD BEARINGS ON CERTAIN C175-16 GENERATOR SETS AND LOCOMOTIVE ENGINES OPERATING AT 1800 RPM ENGINE SPEED
PRODUCT SUPPORT PROGRAM FOR REPLACING THE CONNECTING ROD BEARINGS ON CERTAIN C175-16 GENERATOR SETS AND LOCOMOTIVE ENGINES OPERATING AT 1800 RPM ENGINE SPEED
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REWORKING THE DRILLED OIL PASSAGE ON CERTAIN CONNECTING RODS AND CYLINDER PACKS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REWORKING THE DRILLED OIL PASSAGE ON CERTAIN CONNECTING RODS AND CYLINDER PACKS
Testing and Adjusting
Crankcase Pressure
C175-16 Locomotive Engine
Disassembly and Assembly
Piston Cooling Jets - Remove and Install
C175-16 Locomotive Engine
Bearing Clearance - Check
C175-16 Locomotive Engine
Pistons, Liners, and Connecting Rods - Remove
C175-16 Locomotive Engine
Pistons and Connecting Rods - Disassemble
C175-16 Locomotive Engine
Pistons and Connecting Rods - Assemble
C175-16 Locomotive Engine
Pistons, Liners, and Connecting Rods - Install
C175-16 Locomotive Engine
Service Magazine
An Improved Procedure Is Now Available For Measuring C175 Connecting Rods {1218, 1219}
An Improved Procedure Is Now Available For Measuring C175 Connecting Rods {1218, 1219}
Operation and Maintenance Manual
Crankshaft Vibration Damper - Inspect - Oil Supplied Damper
C175-16 Engine
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Engine News
A New High-Pressure Fuel Pump Adapter Is Now Used on Certain C175 Commercial Engines {125H}
A New High-Pressure Fuel Pump Adapter Is Now Used on Certain C175 Commercial Engines {125H}
Special Instruction
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Technical Information Bulletin
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Tool Operating Manual
NEHS0566 <NOBR> 4C-9832</NOBR> Large Engine Roll-Over Stand {0599, 0701}
NEHS0566 4C-9832 Large Engine Roll-Over Stand {0599, 0701}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
420-9053 C175 Cylinder Block Lifting Tool{0599, 0629, 0632, 0705, 1201}
420-9053 C175 Cylinder Block Lifting Tool{0599, 0629, 0632, 0705, 1201}
424-8895 C175 Crankshaft Lifting Tool{0599, 0629, 0632, 1202}
424-8895 C175 Crankshaft Lifting Tool{0599, 0629, 0632, 1202}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
456-6500 High Capacity Engine Assembly Stand {0374, 0599, 0700, 0701, 1000}
456-6500 High Capacity Engine Assembly Stand {0374, 0599, 0700, 0701, 1000}
M0074900: 509-7382 Locomotive Tooling Lifting Group C175-20 {0374, 0599, 0629, 0632, 0700, 0701}
M0074900: 509-7382 Locomotive Tooling Lifting Group C175-20 {0374, 0599, 0629, 0632, 0700, 0701}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
Reuse And Salvage Guidelines
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Procedure to Inspect the High-Pressure Fuel Pump Adapter on C175 Engines {0374, 0599, 0701, 1151, 1162, 1206}
Procedure to Inspect the High-Pressure Fuel Pump Adapter on C175 Engines {0374, 0599, 0701, 1151, 1162, 1206}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Service Magazine
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Engine News
A New Valve Spring Compressor Tool Group Is Available for Servicing Certain C175 Commercial Engines {0701, 1108}
2014/09/19
New Camshafts and Lifter Levers Are Used For Certain C175 Commercial Engines {1209, 1210}
New Camshafts and Lifter Levers Are Used For Certain C175 Commercial Engines {1209, 1210}
Operation and Maintenance Manual
Engine Valve Lash - Inspect/Adjust
C175-16 Engine
Special Instruction
Procedure to Measure Valve Recession for C175 Engines {0759, 0760, 1100, 1105}
Procedure to Measure Valve Recession for C175 Engines {0759, 0760, 1100, 1105}
Specifications
Lifter Group
C175-16 Marine Engine
Valve Mechanism
C175-16 Marine Engine
Lifter Group
C175-16 Marine Engine
Systems Operation
Valve Mechanism
C175-16 Locomotive Engine
Reuse And Salvage Guidelines
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Testing and Adjusting
Finding the Top Center Position for the No. 1 Piston
C175-16 Locomotive Engine
Valve Lash - Adjust
C175-16 Locomotive Engine
Crankshaft Position for Valve Lash Setting
C175-16 Locomotive Engine
Troubleshooting
Valve Rotator or Spring Lock Is Free
C175-16 Locomotive Engine
Valve Lash Is Excessive
C175-16 Locomotive Engine
Disassembly and Assembly
Valve Cover - Remove and Install
C175-16 Locomotive Engine
Rocker Shaft and Push Rods - Remove
C175-16 Locomotive Engine
Rocker Shaft - Disassemble
C175-16 Locomotive Engine
Rocker Shaft - Assemble
C175-16 Locomotive Engine
Rocker Shaft and Push Rods - Install
C175-16 Locomotive Engine
Valve Lifter - Remove
C175-16 Locomotive Engine
Valve Lifter - Disassemble
C175-16 Locomotive Engine
Valve Lifter - Assemble
C175-16 Locomotive Engine
Valve Lifter - Install
C175-16 Locomotive Engine
Inlet and Exhaust Valve Springs - Remove and Install
C175-16 Locomotive Engine
Reuse And Salvage Guidelines
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}

Truck sale:

Caterpillar C175-16, Construction
625,000 USD 
Caterpillar C175-16, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
2010 CAT C175-16
USD $399,000 
2010 CAT C175-16

React Power Solutions
Houston, Texas
CATERPILLAR C175-16 2007
 
CATERPILLAR C175-16 2007
- STATIONARY GENERATOR SETS
ZEPPELIN POWER SYSTEMS
>
CATERPILLAR C175-16 2010
 
CATERPILLAR C175-16 2010
- STATIONARY GENERATOR SETS
ZEPPELIN POWER SYSTEMS
>
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.