ELECTRICAL AND STARTING SYSTEM
HARNESS GPELECTRICAL AND STARTING SYSTEM
HARNESS GP#SEBP47500360
251-9463: HARNESS AS-ENGINE
251-9463 HARNESS AS-ENGINE
S/N WPT1-1572
CSA
PART OF 251-9516 WIRING GP-ENGINE
AN ATTACHMENT
S/N WPT1-1572
CSA
PART OF 251-9516 WIRING GP-ENGINE
AN ATTACHMENT
For full view, you need register
Parts for your G3516 GAS ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 232-4670 Y | [1] | PLUG GP-CONNECTOR | ||
| 237-4356 | [2] | ADAPTER-CONNECTOR | ||
| 273-3114 | [1] | ADAPTER | ||
| 273-3115 | [1] | ADAPTER | ||
| 273-3116 | [1] | ADAPTER | ||
| 112-3235 | [1] | ADAPTER-FLEXIBLE | ||
| 8T-9006 M | [4] | BOLT-SOCKET HEAD (M3X0.5X20-MM) | ||
| 250-3485 | [1] | BOOT | ||
| 8C-6354 | [1] | CAP-RECEPTACLE (ET CONNECTOR) | ||
| 5P-1276 E | CONDUIT (26.5-MM ID)(55-CM) | |||
| 231-9897 E | CONDUIT-FLEXIBLE (36-MM ID)(7-CM) | |||
| 288-4677 | [1] | CONNECTOR AS (BOTTOM) | ||
| 288-4678 | [1] | CONNECTOR AS (TOP) | ||
| 155-2270 | [7] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH INCLUDES PLUG AS & WEDGE) | ||||
| 155-2260 | [8] | KIT-CONNECTING PLUG (3-PIN) | ||
| (EACH INCLUDES PLUG AS & WEDGE) | ||||
| 176-2943 | [3] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 102-8803 | [2] | KIT-RECEPTACLE (3-PIN) | ||
| (EACH INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 186-3735 | [16] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9W-0852 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 232-4673 | [1] | PLUG (SEAL) | ||
| 7N-9742 | [2] | PLUG AS-CONNECTOR (24-PIN) | ||
| 174-3016 | [1] | PLUG AS-CONNECTOR (3-PIN) | ||
| 5S-7433 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 9D-3955 | [1] | PLUG AS-CONNECTOR (3-PIN) | ||
| 9X-0141 | [1] | PLUG AS-CONNECTOR (40-PIN) | ||
| 9X-9867 | [1] | PLUG AS-CONNECTOR (30-PIN) | ||
| 108-0335 | [1] | PLUG AS-CONNECTOR (37-PIN) | ||
| 147-1443 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 160-7690 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 8T-8731 | [2] | PLUG-CONNECTOR (3-PIN) | ||
| 8T-8737 | [58] | PLUG-SEAL | ||
| 8T-8732 | [3] | RECEPTACLE-CONNECTOR (3-PIN) | ||
| 8T-8736 | [1] | RECEPTACLE-CONNECTOR (9-PIN) | ||
| 232-4674 | [1] | SEAL-CONNECTOR (TOP) | ||
| 232-4675 | [1] | SEAL-CONNECTOR (BOTTOM) | ||
| 114-8843 E | SLEEVE-PLASTIC (150-CM) | |||
| 114-8845 E | SLEEVE-PLASTIC (40-CM) | |||
| 186-3736 | [161] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9W-0844 | [2] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 7K-1181 | [1] | STRAP-CABLE | ||
| 9X-8243 E | TUBE-HEAT SHRINK (39.9-MM DIA)(8-CM) | |||
| 5P-6009 D | TUBE-HEAT SHRINK (9.52-MM DIA)(1.5-M) | |||
| 8T-6342 E | TUBE-HEAT SHRINK (3.2-MM DIA)(244-CM) | |||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(58-CM) | |||
| 3E-3371 | [2] | WEDGE-RECEPTACLE LOCK (3-PIN) | ||
| 121-0199 E | WRAP-SPIRAL (3/8-IN OD)(28-CM) | |||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP47500361
305-4550: HARNESS AS-ENGINE
For full view, you need register
Parts for your G3516 GAS ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 237-4356 | [2] | ADAPTER-CONNECTOR | ||
| 273-3114 | [1] | ADAPTER | ||
| 112-3235 | [1] | ADAPTER-FLEXIBLE | ||
| 8T-9006 M | [8] | BOLT-SOCKET HEAD (M3X0.5X20-MM) | ||
| 250-3485 | [1] | BOOT | ||
| 8C-6354 | [1] | CAP-RECEPTACLE (ET CONNECTOR) | ||
| 100-5805 | [2] | CAP-RECEPTACLE (3-PIN) | ||
| 5P-1276 E | CONDUIT (26.5-MM ID)(55-CM) | |||
| 231-9897 E | CONDUIT-FLEXIBLE (36-MM ID)(7-CM) | |||
| 288-4677 | [2] | CONNECTOR AS (BOTTOM) | ||
| 288-4678 | [2] | CONNECTOR AS (TOP) | ||
| 155-2260 | [4] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS & WEDGE) | ||||
| 176-2943 | [3] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH KIT INCLUDES PLUG AS & WEDGE) | ||||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8803 | [2] | KIT-RECEPTACLE (3-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 186-3735 | [25] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9W-0852 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 232-4673 | [2] | PLUG | ||
| 234-5896 | [1] | PLUG | ||
| 7N-9742 | [2] | PLUG AS-CONNECTOR (24-PIN) | ||
| 5S-7433 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 9D-3955 | [1] | PLUG AS-CONNECTOR (3-PIN) | ||
| 9X-0141 | [1] | PLUG AS-CONNECTOR (40-PIN) | ||
| 3E-4367 | [1] | RING-RETAINING | ||
| 3E-8557 M | [1] | BOLT (M5X0.8X39.37-MM) | ||
| 9X-3490 | [2] | SEAL-CONNECTOR (40-PIN) | ||
| 9X-9867 | [1] | PLUG AS-CONNECTOR (30-PIN) | ||
| 108-0335 | [1] | PLUG AS-CONNECTOR (37-PIN) | ||
| 147-1443 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 159-9322 | [1] | SEAL-O-RING | ||
| 160-7690 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 159-9322 | [1] | SEAL-O-RING | ||
| 174-3016 | [1] | PLUG AS-CONNECTOR (3-PIN) | ||
| 8T-8731 | [2] | PLUG-CONNECTOR (3-PIN) | ||
| 8T-8737 | [54] | PLUG-SEAL | ||
| 8T-8732 | [5] | RECEPTACLE-CONNECTOR (3-PIN) | ||
| 8T-8736 | [1] | RECEPTACLE-CONNECTOR (9-PIN) | ||
| 232-4674 | [2] | SEAL-CONNECTOR (TOP) | ||
| 232-4675 | [2] | SEAL-CONNECTOR (BOTTOM) | ||
| 114-8843 E | SLEEVE-PLASTIC (190-CM) | |||
| 114-8845 E | SLEEVE-PLASTIC (40-CM) | |||
| 186-3736 | [169] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9W-0844 | [2] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 7K-1181 | [1] | STRAP-CABLE | ||
| 5P-6009 D | TUBE-HEAT SHRINK (9.52-MM DIA)(1.6-M) | |||
| 8T-6342 E | TUBE-HEAT SHRINK (3.2-MM DIA)(265-CM) | |||
| 9X-8243 E | TUBE-HEAT SHRINK (39.9-MM DIA)(8-CM) | |||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(84-CM) | |||
| 126-9424 E | TUBE-HEAT SHRINK (3.2-MM DIA)(10-CM) | |||
| 121-0199 E | WRAP-SPIRAL (3/8-IN OD)(28-CM) | |||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP47500362
337-0285: HARNESS AS-ENGINE
337-0285 HARNESS AS-ENGINE
S/N WPT1500-UP
PART OF 306-9148, 306-9149 WIRING GP-ENGINE
AN ATTACHMENT
S/N WPT1500-UP
PART OF 306-9148, 306-9149 WIRING GP-ENGINE
AN ATTACHMENT
For full view, you need register
Parts for your G3516 GAS ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 5S-7433 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 7N-9742 | [2] | PLUG AS-CONNECTOR (24-PIN) | ||
| 9X-0141 | [1] | PLUG AS-CONNECTOR (40-PIN) | ||
| 3E-4367 | [1] | RING-RETAINING | ||
| 3E-8557 M | [1] | BOLT (M5X0.8X39.37-MM) | ||
| 9X-3490 | [2] | SEAL-CONNECTOR (40-PIN) | ||
| 9X-9867 | [1] | PLUG AS-CONNECTOR (30-PIN) | ||
| 108-0335 | [1] | PLUG AS-CONNECTOR (37-PIN) | ||
| 147-1443 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 159-9322 | [1] | SEAL-O-RING | ||
| 160-7690 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 159-9322 | [1] | SEAL-O-RING | ||
| 174-3016 | [1] | PLUG AS-CONNECTOR (3-PIN) | ||
| 237-0227 | [2] | PLUG AS-CONNECTOR (3-PIN) | ||
| (EACH INCLUDES) | ||||
| 264-7030 | [1] | SEAL-CONNECTOR | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8803 | [2] | KIT-RECEPTACLE (3-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 155-2260 | [2] | KIT-CONNECTING PLUG (3-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGES & INTERFACE SEAL) | ||||
| 155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
| 176-2943 | [3] | KIT-CONNECTING PLUG (2-PIN) | ||
| 305-0582 | [1] | KIT-CONNECTING PLUG (8-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 8T-8729 | [18] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8730 | [165] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8731 | [2] | PLUG-CONNECTOR (3-PIN) | ||
| 8T-8732 | [3] | RECEPTACLE-CONNECTOR (3-PIN) | ||
| 8T-8736 | [1] | RECEPTACLE-CONNECTOR (9-PIN) | ||
| 9W-0844 | [2] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9W-0852 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 104-3643 | [1] | CONNECTOR | ||
| 232-4674 | [2] | SEAL-CONNECTOR (TOP) | ||
| 232-4675 | [2] | SEAL-CONNECTOR (BOTTOM) | ||
| 237-4356 | [2] | ADAPTER-CONNECTOR | ||
| 288-4677 | [2] | CONNECTOR AS (BOTTOM) | ||
| 288-4678 | [2] | CONNECTOR AS (TOP) | ||
| 5P-1276 E | CONDUIT (26.5-MM ID)(55-CM) | |||
| 8T-6342 E | TUBE-HEAT SHRINK (3.2-MM DIA)(246-CM) | |||
| 9X-8243 E | TUBE-HEAT SHRINK (39.9-MM DIA)(8-CM) | |||
| 114-8843 E | SLEEVE-PLASTIC (160-CM) | |||
| 114-8845 E | SLEEVE-PLASTIC (40-CM) | |||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(58-CM) | |||
| 121-0199 E | WRAP-SPIRAL (3/8-IN OD)(28-CM) | |||
| 126-9424 E | TUBE-HEAT SHRINK (3.2-MM DIA)(10-CM) | |||
| 231-9897 E | CONDUIT-FLEXIBLE (36-MM ID)(7-CM) | |||
| 5P-6009 E | TUBE-HEAT SHRINK (9.52-MM DIA)(160-CM) | |||
| 7K-1181 | [1] | STRAP-CABLE | ||
| 8C-6354 | [1] | CAP-RECEPTACLE (ET CONNECTOR) | ||
| 8T-8737 | [60] | PLUG-SEAL | ||
| 112-3235 | [1] | ADAPTER-FLEXIBLE | ||
| 232-4673 | [2] | PLUG | ||
| 250-3485 | [1] | BOOT | ||
| 273-3114 | [1] | ADAPTER | ||
| 311-3922 M | [8] | BOLT-SOCKET HEAD (M3X0.5X20-MM) | ||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP47500363
391-8344: HARNESS AS-ENGINE
391-8344 HARNESS AS-ENGINE
S/N WPT1573-UP
PART OF 251-9516 WIRING GP-ENGINE
AN ATTACHMENT
S/N WPT1573-UP
PART OF 251-9516 WIRING GP-ENGINE
AN ATTACHMENT
For full view, you need register
Parts for your G3516 GAS ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8803 | [2] | KIT-RECEPTACLE (3-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 5P-6009 D | TUBE-HEAT SHRINK (9.52-MM DIA)(1.5-M) | |||
| 5P-1276 E | CONDUIT (26.5-MM ID)(56-CM) | |||
| 5S-7433 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 7K-1181 | [1] | STRAP-CABLE | ||
| 7N-9742 | [2] | PLUG AS-CONNECTOR (24-PIN) | ||
| 8C-6354 | [1] | CAP-RECEPTACLE (ET CONNECTOR) | ||
| 8T-8729 | [16] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8730 | [161] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8731 | [2] | PLUG-CONNECTOR (3-PIN) | ||
| 8T-8732 | [2] | RECEPTACLE-CONNECTOR (3-PIN) | ||
| 8T-8736 | [1] | RECEPTACLE-CONNECTOR (9-PIN) | ||
| 8T-8737 | [55] | PLUG-SEAL | ||
| 9D-3955 | [1] | PLUG AS-CONNECTOR (3-PIN) | ||
| 9W-0844 | [2] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9W-0852 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-0141 | [1] | PLUG AS-CONNECTOR (40-PIN) | ||
| 3E-4367 | [1] | RING-RETAINING | ||
| 3E-8557 M | [1] | BOLT (M5X0.8X39.37-MM) | ||
| 9X-3490 | [2] | SEAL-CONNECTOR (40-PIN) | ||
| 9X-8243 E | TUBE-HEAT SHRINK (39.9-MM DIA)(13-CM) | |||
| 9X-9867 | [1] | PLUG AS-CONNECTOR (30-PIN) | ||
| 104-3643 | [1] | CONNECTOR | ||
| 108-0335 | [1] | PLUG AS-CONNECTOR (37-PIN) | ||
| 112-3235 | [1] | ADAPTER-FLEXIBLE | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(33-CM) | |||
| 121-0199 E | WRAP-SPIRAL (3/8-IN OD)(56-CM) | |||
| 124-0284 E | TUBE-HEAT SHRINK (3.2-MM DIA)(303-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(70-CM) | |||
| 126-9424 E | TUBE-HEAT SHRINK (3.2-MM DIA)(10-CM) | |||
| 147-1443 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 159-9322 | [1] | SEAL-O-RING | ||
| 155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 155-2260 | [4] | KIT-CONNECTING PLUG (3-PIN) | ||
| (EACH KIT INCLUDES PLUG AS, WEDGES & INTERFACE SEAL) | ||||
| 160-7690 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 159-9322 | [1] | SEAL-O-RING | ||
| 1P-0810 B | [1] | TAPE-ELECTRICAL | ||
| 174-3016 | [1] | PLUG AS-CONNECTOR (3-PIN) | ||
| 176-2943 | [3] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 231-9897 E | CONDUIT-FLEXIBLE (36-MM ID)(7-CM) | |||
| 232-4673 | [2] | PLUG | ||
| 232-4674 | [2] | SEAL-CONNECTOR (TOP) | ||
| 232-4675 | [2] | SEAL-CONNECTOR (BOTTOM) | ||
| 237-4356 | [2] | ADAPTER-CONNECTOR | ||
| 250-3485 | [1] | BOOT | ||
| 273-3114 | [1] | ADAPTER | ||
| 288-4677 | [2] | CONNECTOR AS (BOTTOM) | ||
| 288-4678 | [2] | CONNECTOR AS (TOP) | ||
| 311-3922 M | [8] | BOLT-SOCKET HEAD (M3X0.5X20-MM) | ||
| B | USE AS REQUIRED | |||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP47500364
391-8347: HARNESS AS-ENGINE
391-8347 HARNESS AS-ENGINE
S/N WPT1534-UP
PART OF 306-9148, 306-9149 WIRING GP-ENGINE
AN ATTACHMENT
S/N WPT1534-UP
PART OF 306-9148, 306-9149 WIRING GP-ENGINE
AN ATTACHMENT
For full view, you need register
Parts for your G3516 GAS ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8803 | [2] | KIT-RECEPTACLE (3-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 5P-6009 D | TUBE-HEAT SHRINK (9.52-MM DIA)(1.6-M) | |||
| 5P-1276 E | CONDUIT (26.5-MM ID)(55-CM) | |||
| 5S-7433 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 7K-1181 | [1] | STRAP-CABLE | ||
| 7N-9742 | [2] | PLUG AS-CONNECTOR (24-PIN) | ||
| 8C-6354 | [1] | CAP-RECEPTACLE (ET CONNECTOR) | ||
| 8T-8729 | [16] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8730 | [165] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8731 | [2] | PLUG-CONNECTOR (3-PIN) | ||
| 8T-8732 | [2] | RECEPTACLE-CONNECTOR (3-PIN) | ||
| 8T-8736 | [1] | RECEPTACLE-CONNECTOR (9-PIN) | ||
| 8T-8737 | [59] | PLUG-SEAL | ||
| 9W-0844 | [2] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9W-0852 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-0141 | [1] | PLUG AS-CONNECTOR (40-PIN) | ||
| 3E-4367 | [1] | RING-RETAINING | ||
| 3E-8557 M | [1] | BOLT (M5X0.8X39.37-MM) | ||
| 9X-3490 | [2] | SEAL-CONNECTOR (40-PIN) | ||
| 9X-8243 E | TUBE-HEAT SHRINK (39.9-MM DIA)(8-CM) | |||
| 9X-9867 | [1] | PLUG AS-CONNECTOR (30-PIN) | ||
| 104-3643 | [1] | CONNECTOR | ||
| 108-0335 | [1] | PLUG AS-CONNECTOR (37-PIN) | ||
| 112-3235 | [1] | ADAPTER-FLEXIBLE | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(124-CM) | |||
| 121-0199 E | WRAP-SPIRAL (3/8-IN OD)(58-CM) | |||
| 124-0284 E | TUBE-HEAT SHRINK (3.2-MM DIA)(305-CM) | |||
| 126-9424 E | TUBE-HEAT SHRINK (3.2-MM DIA)(10-CM) | |||
| 147-1443 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 159-9322 | [1] | SEAL-O-RING | ||
| 155-2260 | [2] | KIT-CONNECTING PLUG (3-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGES & INTERFACE SEAL) | ||||
| 155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 160-7690 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 159-9322 | [1] | SEAL-O-RING | ||
| 1P-0810 B | [1] | TAPE-ELECTRICAL | ||
| 174-3016 | [1] | PLUG AS-CONNECTOR (3-PIN) | ||
| 176-2943 | [3] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH INCLUDES PLUG AS & WEDGE) | ||||
| 231-9897 E | CONDUIT-FLEXIBLE (36-MM ID)(7-CM) | |||
| 232-4673 | [2] | PLUG | ||
| 232-4674 | [2] | SEAL-CONNECTOR (TOP) | ||
| 232-4675 | [2] | SEAL-CONNECTOR (BOTTOM) | ||
| 237-0227 | [2] | PLUG AS-CONNECTOR (3-PIN) | ||
| (EACH INCLUDES) | ||||
| 264-7030 | [1] | SEAL-CONNECTOR | ||
| 237-4356 | [2] | ADAPTER-CONNECTOR | ||
| 250-3485 | [1] | BOOT | ||
| 273-3114 | [1] | ADAPTER | ||
| 288-4677 | [2] | CONNECTOR AS (BOTTOM) | ||
| 288-4678 | [2] | CONNECTOR AS (TOP) | ||
| 305-0582 | [1] | KIT-CONNECTING PLUG (8-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 311-3922 M | [8] | BOLT-SOCKET HEAD (M3X0.5X20-MM) | ||
| B | USE AS REQUIRED | |||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP47500365
4P-7487: HARNESS AS-ENGINE
4P-7487 HARNESS AS-ENGINE
S/N WPT1598-UP
PART OF 251-9460 IGNITION GP-GAS ENGINE
AN ATTACHMENT
S/N WPT1598-UP
PART OF 251-9460 IGNITION GP-GAS ENGINE
AN ATTACHMENT
For full view, you need register
Parts for your G3516 GAS ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 110-8359 | [1] | CONNECTOR AS (37-PIN) | ||
| 3E-5411 | [1] | CONNECTOR (37-PIN)(RECEPTACLE) | ||
| 155-2270 | [16] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH INCLUDES PLUG AS,WEDGE & INTERFACE SEAL) | ||||
| 4P-8367 | [17] | ROD-SUPPORT | ||
| 8T-8730 | [32] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 1S-9593 | [16] | STRAP-CABLE | ||
| 8T-6342 E | TUBE-HEAT SHRINK (3.2-MM DIA)(160-CM) | |||
| E | ORDER BY THE CENTIMETER | |||
#SEBP47500366
343-3312: HARNESS AS-PANEL
343-3312 HARNESS AS-PANEL
PART OF 317-5038, 317-5039, 423-0849, 443-6061 BOX GP-CONTROL
AN ATTACHMENT
PART OF 317-5038, 317-5039, 423-0849, 443-6061 BOX GP-CONTROL
AN ATTACHMENT
For full view, you need register
Parts for your G3516 GAS ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 109-3038 | [29] | END-WIRE (16-GA) | ||
| 110-8714 | [3] | END-WIRE (18-GA) | ||
| 174-0503 | [2] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 8T-8729 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 147-1444 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 159-9322 | [1] | SEAL-O-RING | ||
| 174-3016 | [1] | PLUG AS-CONNECTOR (3-PIN) | ||
| 8T-8737 | [5] | PLUG-SEAL | ||
| 122-9457 | [1] | POTENTIOMETER (ENGINE SPEED) | ||
| 133-0970 | [1] | RECEPTACLE AS-CONNECTOR (TEE) | ||
| 265-4123 | [1] | RECEPTACLE AS-CONNECTOR (9-PIN) | ||
| 8T-8730 | [14] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 3S-2093 | [23] | STRAP-CABLE | ||
| 8L-8413 | [12] | STRAP-CABLE (WHITE) | ||
| 5P-1477 | [2] | TERMINAL-FORK (10-GA TO 12-GA, NO. 8 SCREW) | ||
| 5P-1475 | [6] | TERMINAL-FORK (14-GA TO 16-GA, NO. 8 SCREW) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM) | |||
| 5P-6009 D | TUBE-HEAT SHRINK (9.52-MM DIA)(0.2-M) | |||
| 124-0284 E | TUBE-HEAT SHRINK (3.2-MM DIA)(76-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(20-CM) | |||
| 121-0199 E | WRAP-SPIRAL (3/8-IN OD)(307-CM) | |||
| 121-0200 E | WRAP-SPIRAL (3/4-IN OD)(60-CM) | |||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
#SEBP47500367
251-9434: HARNESS AS-POWER
For full view, you need register
Parts for your G3516 GAS ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 8T-8827 | [1] | BOOT (RED) | ||
| 9W-3497 | [1] | BOOT (BLACK) | ||
| 131-3201 | [2] | BOOT | ||
| 108-2515 | [1] | COVER-TERMINAL | ||
| 1H-4560 | [3] | BOOT-SPARK PLUG | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS & WEDGE) | ||||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8N-1546 | [2] | PIN-CONNECTOR (6-GA) | ||
| 186-3735 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 127-5483 | [2] | PLUG AS-CONNECTOR (1-PIN) | ||
| 8T-8735 | [1] | PLUG-CONNECTOR | ||
| 7G-7920 | [2] | PLUG-SEAL | ||
| 8T-8737 | [2] | PLUG-SEAL | ||
| 127-5484 | [2] | RECEPTACLE AS-CONNECTOR (1-PIN) | ||
| 114-8843 E | SLEEVE-PLASTIC (173-CM) | |||
| 8N-1547 | [2] | SOCKET-CONNECTOR (6-GA) | ||
| 186-3736 | [6] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9W-0844 | [4] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 2L-8049 | [1] | TERMINAL-RING (6-GA, NO. 10 SCREW) | ||
| 2L-8065 | [1] | TERMINAL-RING (10-GA TO 12-GA, NO. 8 SCREW) | ||
| 2L-8075 | [2] | TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW) | ||
| 2L-8050 | [4] | TERMINAL-RING (6-GA, 1/4-IN SCREW) | ||
| 2L-8066 | [1] | TERMINAL-RING (10-GA TO 12-GA, NO. 10 SCREW) | ||
| 125-7876 E | TUBE-HEAT SHRINK (17.78-MM DIA)(15-CM) | |||
| E | ORDER BY THE CENTIMETER | |||
#SEBP47500368
251-9475: HARNESS AS-POWER
251-9475 HARNESS AS-POWER -ALTERNATOR
PART OF 251-9474 WIRING GP-ALTERNATOR
AN ATTACHMENT
PART OF 251-9474 WIRING GP-ALTERNATOR
AN ATTACHMENT
For full view, you need register
Parts for your G3516 GAS ENGINE:
CATERPILLAR SIS#SEBP47500369
423-0850: HARNESS AS-POWER
For full view, you need register
Parts for your G3516 GAS ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 5P-6009 D | TUBE-HEAT SHRINK (9.52-MM DIA)(0.2-M) | |||
| 8T-8737 | [18] | PLUG-SEAL | ||
| 9X-3401 | [14] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3402 | [14] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 122-4386 | [1] | CONNECTOR-PLUG (23-PIN) | ||
| 124-0284 E | TUBE-HEAT SHRINK (3.2-MM DIA)(62-CM) | |||
| 388-6612 | [1] | RECEPTACLE AS | ||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
Information:
ELECTRICAL AND STARTING SYSTEM
HARNESS GP
Engine News
New Gas Shutoff Valves (GSOV) Are Now Used for Certain Gas Engine Applications {1270, 1403}
New Gas Shutoff Valves (GSOV) Are Now Used for Certain Gas Engine Applications {1270, 1403}
New Gas Shutoff Valves (GSOV) Are Now Used for Certain Gas Engine Applications {1270, 1403}
Special Instruction
Installation Procedure on Installing the Oil & Gas Asset IQ<SUP>TM</SUP> System on All Caterpillar and Non-Caterpillar Diesel, Natural Gas, and Dynamic Gas Blending Engines {1000, 1408, 7620, 7960}
Installation Procedure on Installing the Oil & Gas Asset IQTM System on All Caterpillar and Non-Caterpillar Diesel, Natural Gas, and Dynamic Gas Blending Engines {1000, 1408, 7620, 7960}
Installation Procedure on Installing the Oil & Gas Asset IQTM System on All Caterpillar and Non-Caterpillar Diesel, Natural Gas, and Dynamic Gas Blending Engines {1000, 1408, 7620, 7960}
Procedure to Replace Armature of Starter Motor On All Cat<SUP>®</SUP> Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat<SUP>®</SUP> Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Tool Operating Manual
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Caterpillar Parts SIS Catalog G3516 :
Truck sale:
59,000 USD
