AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

C13 Euro IV Truck Engine S3C00001-UP BASIC ENGINE Caterpillar SIS



TRUCK ENGINE C13 TRUCK ENGINE S3C
 C13 Euro IV Truck Engine S3C00001-UP SEBP4760 C13 S3C   (2007)

Parts group C13:

  For full view, you need register
BASIC ENGINE
AIR COMPRESSOR GP
AIR COMPRESSOR GP
280-6798 AIR COMPRESSOR GP
280-6798 AIR COMPRESSOR GP
FOR USE WITH AIR SUPPLY LINES GP OR PLUG GP
CANNOT BE USED WITH REAR POWER TAKE OFF
AN ATTACHMENT
AIR COMPRESSOR GP
288-3853 AIR COMPRESSOR GP
288-3853 AIR COMPRESSOR GP
PART OF 280-6798 AIR COMPRESSOR GP
AN ATTACHMENT
AIR COMPRESSOR GP
314-6150 AIR COMPRESSOR GP
314-6150 AIR COMPRESSOR GP
S/N S3C150-UP
PART OF 288-3853, 317-7525 AIR COMPRESSOR GP
ALSO AN ATTACHMENT
AIR COMPRESSOR GP
317-7525 AIR COMPRESSOR GP
317-7525 AIR COMPRESSOR GP
S/N S3C150-UP
PART OF 317-7526 AIR COMPRESSOR GP
Type 1
AIR COMPRESSOR GP
317-7525 AIR COMPRESSOR GP
317-7525 AIR COMPRESSOR GP
S/N S3C150-UP
PART OF 317-7526 AIR COMPRESSOR GP
Type 2
AIR COMPRESSOR GP
317-7526 AIR COMPRESSOR GP
317-7526 AIR COMPRESSOR GP
S/N S3C150-UP
AIR COMPRESSOR GP
344-6363 AIR COMPRESSOR GP
344-6363 AIR COMPRESSOR GP
S/N S3C150-UP
PART OF 317-7525 AIR COMPRESSOR GP
OPTIONAL FIELD REPLACEMENT ORDER 385-0939 AIR COMPRESSOR GP
LINES GP-AIR COMPRESSOR
271-2472 LINES GP-AIR COMPRESSOR
271-2472 LINES GP-AIR COMPRESSOR
S/N S3C150-UP
PROVIDES A NATURALLY ASPIRATED AIR SUPPLY LINE FOR THE AIR COMPRESSOR
FOR USE WITH HIGH MOUNT TURBO POSITION
CANNOT BE USED WITH MID OR LOW MOUNT TURBO POSITIONS
PLUG GP-AIR COMPRESSOR
275-5814 PLUG GP-AIR COMPRESSOR
275-5814 PLUG GP-AIR COMPRESSOR
PROVIDES PLUGS WHEN THE AIR COMPRESSOR AIR SUPPLY LINE IS INSTALLED BY THE CUSTOMER
AN ATTACHMENT
BELT TIGHTENER GP
BELT TENSIONER GP
281-3420 BELT TENSIONER GP
281-3420 BELT TENSIONER GP
PROVIDES PAD-MOUNT ALTERNATOR MOUNTING BRACKET, TENSIONER & IDLER PULLEY FOR 6-RIB POLY-VEE CRANKSHAFT/ALTERNATOR DRIVE.
FOR USE WITH @@@@@281-3419@@@@@
AN ATTACHMENT
BELT TENSIONER GP
281-3421 BELT TENSIONER GP
281-3421 BELT TENSIONER GP
S/N S3C150-UP
PROVIDES PAD MOUNT ALTERNATOR MOUNTING BRACKET, TENSIONER & IDLER PULLEYS FOR 6-RIB POLY-VEE CRANKSHAFT/ALTERNATOR DRIVE
FOR USE WITH @@@@@281-3419@@@@@, SIMILAR MOUNTING ATTACHMENT
ENGINE BRAKE GP
ACTUATOR AS-VALVE
348-7900 ACTUATOR AS-VALVE
348-7900 ACTUATOR AS-VALVE
S/N S3C150-UP
12 VOLT
PART OF 250-0012 ACTUATOR GP-VALVE
ALSO AN ATTACHMENT
ACTUATOR GP-VALVE
250-0012 ACTUATOR GP-VALVE
250-0012 ACTUATOR GP-VALVE
S/N S3C150-UP
PROVIDES A VARIABLE VALVE ACTUATOR WITH A 12-VOLT CAT BRAKE
FOR USE WITH @@@@@249-8981@@@@@
CANNOT BE USED WITH @@@@@250-0024@@@@@
ALSO AN ATTACHMENT
ACTUATOR GP-VALVE
250-0024 ACTUATOR GP-VALVE
250-0024 ACTUATOR GP-VALVE
PROVIDES A VARIABLE VALVE ACTUATOR WITH A 24-VOLT CAT BRAKE
FOR USE WITH @@@@@249-8981@@@@@
CANNOT BE USED WITH @@@@@250-0012@@@@@
AN ATTACHMENT
CAMSHAFT GP
CAMSHAFT GP
261-0802 CAMSHAFT GP
261-0802 CAMSHAFT GP
SINGLE
COMPRESSOR GP-REFRIGERANT
MOUNTING GP-REFRIGERANT COMPR
272-0402 MOUNTING GP-REFRIGERANT COMPR
272-0402 MOUNTING GP-REFRIGERANT COMPR
PROVIDES A SUPPORT FROM THE CYLINDER HEAD TO THE RH REFRIGERANT COMPRESSOR MOUNTING BRACKET
FOR USE WITH DRIVE GP-REFRIGERANT COMPRESSOR MOUNTED ON THE RH SIDE OF ENGINE
AN ATTACHMENT
MOUNTING GP-REFRIGERANT COMPR
276-0732 MOUNTING GP-REFRIGERANT COMPR
276-0732 MOUNTING GP-REFRIGERANT COMPR
S/N S3C150-UP
PROVIDES A FREON COMPRESSOR MOUNTING BRACKET FOR REAR-DISCHARGE SANDEN A/C COMPRESSOR - VERTICAL PAD MOUNT
MOUNTING GP-REFRIGERANT COMPR
281-3419 MOUNTING GP-REFRIGERANT COMPR
281-3419 MOUNTING GP-REFRIGERANT COMPR
S/N S3C150-UP
PROVIDES AN A/C COMPRESSOR MOUNTING BRACKET, TENSIONER, & IDLERS FOR A 10-RIB FAN/COMPRESSOR DRIVE
FOR USE WITH @@@@@272-0402@@@@@, PAD-MOUNT A/C COMPRESSORS
ALSO AN ATTACHMENT
CRANKSHAFT GP
CRANKSHAFT GP
224-3881 CRANKSHAFT GP
224-3881 CRANKSHAFT GP
CRANKSHAFT GP
265-5079 CRANKSHAFT GP
265-5079 CRANKSHAFT GP
S/N S3C1-149
SEAL GP-CRANKSHAFT
116-1091 SEAL GP-CRANKSHAFT
116-1091 SEAL GP-CRANKSHAFT
S/N S3C150-UP
REAR
ALSO AN ATTACHMENT
CYLINDER BLOCK GP
CYLINDER BLOCK AS
289-1554 CYLINDER BLOCK AS
289-1554 CYLINDER BLOCK AS
PART OF 289-1555 CYLINDER BLOCK AS
CYLINDER BLOCK AS
289-1555 CYLINDER BLOCK AS
289-1555 CYLINDER BLOCK AS
PART OF 289-1556 CYLINDER BLOCK AS
CYLINDER BLOCK AS
289-1556 CYLINDER BLOCK AS
289-1556 CYLINDER BLOCK AS
PART OF 263-9577 CYLINDER BLOCK GP
CYLINDER BLOCK GP
263-9577 CYLINDER BLOCK GP
263-9577 CYLINDER BLOCK GP
PLUG GP-CYLINDER BLOCK
117-0165 PLUG GP-CYLINDER BLOCK
117-0165 PLUG GP-CYLINDER BLOCK -OIL GALLERY, END
S/N S3C150-UP
273-0817 PLUG GP-ENGINE
273-0817 PLUG GP-ENGINE
S/N S3C150-UP
PROVIDES A PLUG GP WHEN THE OCV DELTA PRESSURE SENSOR IS NOT NEEDED
ALSO AN ATTACHMENT
PLUG GP-ENGINE
307-2667 PLUG GP-ENGINE
307-2667 PLUG GP-ENGINE
FOR USE WITH BLOCK WHEN A REAR HEATER GROUP IS NOT CALLED OUT
AN ATTACHMENT
CYLINDER HEAD GP
CYLINDER HEAD AS
300-9512 CYLINDER HEAD AS
300-9512 CYLINDER HEAD AS
PART OF 289-3211 CYLINDER HEAD GP
FIELD REPLACEMENT ORDER @@@@@335-8322@@@@@
CYLINDER HEAD AS
335-8322 CYLINDER HEAD AS
335-8322 CYLINDER HEAD AS
FIELD REPLACEMENT FOR @@@@@300-9512@@@@@
CYLINDER HEAD AS
346-1984 CYLINDER HEAD AS
346-1984 CYLINDER HEAD AS
PART OF 289-3211 CYLINDER HEAD GP
CYLINDER HEAD GP
261-0799 CYLINDER HEAD GP
261-0799 CYLINDER HEAD GP
CYLINDER HEAD GP
289-3211 CYLINDER HEAD GP
289-3211 CYLINDER HEAD GP
PART OF 261-0799 CYLINDER HEAD GP
Type 1
CYLINDER HEAD GP
289-3211 CYLINDER HEAD GP
289-3211 CYLINDER HEAD GP
PART OF 261-0799 CYLINDER HEAD GP
Type 2
FASTENER GP-CYLINDER HEAD
198-4963 FASTENER GP-CYLINDER HEAD
198-4963 FASTENER GP-CYLINDER HEAD
PART OF 261-0799 CYLINDER HEAD GP
273-0817 PLUG GP-ENGINE
273-0817 PLUG GP-ENGINE
S/N S3C150-UP
PROVIDES A PLUG GP WHEN THE OCV DELTA PRESSURE SENSOR IS NOT NEEDED
ALSO AN ATTACHMENT
PLUG GP-ENGINE
307-2667 PLUG GP-ENGINE
307-2667 PLUG GP-ENGINE
FOR USE WITH BLOCK WHEN A REAR HEATER GROUP IS NOT CALLED OUT
AN ATTACHMENT
DAMPER GP
DAMPER GP
289-1418 DAMPER GP
289-1418 DAMPER GP
S/N S3C1-12771
PROVIDES A VISCONIC DAMPER WITH 6 GROOVE POLY-RIB BELT DRIVE AND ADAPTER FOR USE ON ALL ENGINES
FOR USE WITH @@@@@284-4812@@@@@
AN ATTACHMENT
DAMPER GP
289-1418 DAMPER GP
289-1418 DAMPER GP
S/N S3C150-UP
PROVIDES A VISCONIC DAMPER WITH 6 GROOVE POLY-RIB BELT DRIVE AND ADAPTER FOR USE ON ALL ENGINES
FOR USE WITH @@@@@284-4812@@@@@
ALSO AN ATTACHMENT
FASTENER GP-DAMPER & PULLEY
268-8246 FASTENER GP-DAMPER & PULLEY
268-8246 FASTENER GP-DAMPER & PULLEY
PROVIDES DAMPER AND CRANKSHAFT PULLEY MOUNTING BOLTS AND SPACER
AN ATTACHMENT
DRIVE GP-AUXILIARY
ADAPTER GP-AUXILIARY DRIVE
291-3938 ADAPTER GP-AUXILIARY DRIVE
291-3938 ADAPTER GP-AUXILIARY DRIVE
S/N S3C150-UP
PROVIDES FRONT PTO ADAPTER AND MOUNTING HARDWARE
CANNOT BE USED WITH @@@@@268-8246@@@@@, DAMPER/PULLEY FASTENER GPS
DRIVE GP-FAN
MOUNTING GP-FAN DRIVE
219-7440 MOUNTING GP-FAN DRIVE
219-7440 MOUNTING GP-FAN DRIVE
52-MM
AN ATTACHMENT
MOUNTING GP-FAN DRIVE
307-1580 MOUNTING GP-FAN DRIVE
307-1580 MOUNTING GP-FAN DRIVE
S/N S3C150-UP
PROVIDES (2) STUDS
FOR USE WITH FAN DRIVE MOUNTING GPS
FLYWHEEL GP
FASTENER GP-FLYWHEEL
117-2794 FASTENER GP-FLYWHEEL
117-2794 FASTENER GP-FLYWHEEL
S/N S3C150-UP
CANNOT BE USED WITH GEAR GP-REAR (RPTO)
ALSO AN ATTACHMENT
FLYWHEEL GP
200-2260 FLYWHEEL GP
200-2260 FLYWHEEL GP
S/N S3C150-UP
432-MM (17-INCH) SINGLE PLATE CLUTCH
FOR USE WITH @@@@@117-2794@@@@@
FLYWHEEL GP
204-0812 FLYWHEEL GP
204-0812 FLYWHEEL GP
PROVIDES 17 INCH SINGLE PLATE FLAT TYPE FLYWHEEL
FOR USE WITH @@@@@117-2794@@@@@
AN ATTACHMENT
FLYWHEEL GP
290-4180 FLYWHEEL GP
290-4180 FLYWHEEL GP
394-MM (15.5 IN) FLYWHEEL
FOR USE WITH @@@@@117-2794@@@@@
AN ATTACHMENT
GEAR GP
GEAR GP-FRONT
222-3088 GEAR GP-FRONT
222-3088 GEAR GP-FRONT
HOUSING GP-FRONT
265-5081 HOUSING GP-FRONT
265-5081 HOUSING GP-FRONT
HOUSING GP-FLYWHEEL
FLANGE GP-OUTPUT SHAFT
117-2747 FLANGE GP-OUTPUT SHAFT
117-2747 FLANGE GP-OUTPUT SHAFT
FOR USE WITH CUSTOMER SUPPLIED PTO FLANGE
AN ATTACHMENT
HOUSING GP-FLYWHEEL
284-9085 HOUSING GP-FLYWHEEL
284-9085 HOUSING GP-FLYWHEEL
S/N S3C150-UP
PROVIDES ACCESS FOR FLEX PLATE BOLTS ON THE LH SIDE AND MOUNTING BOSSES ON TOP FOR THE FUEL MANIFOLD
ALSO AN ATTACHMENT
HOUSING GP-FRONT
BRACKET GP-SUPPORT
249-9464 BRACKET GP-SUPPORT
249-9464 BRACKET GP-SUPPORT -CLEAN GAS INDUCTION ACTUATOR
PROVIDES MOUNTING BRACKET GP FOR LOW MOUNT CLEAN GAS INDUCTION ACTUATORS
FOR USE WITH LOW MOUNT TURBO CONFIGURATION
AN ATTACHMENT
COVER GP-FRONT HOUSING
113-8987 COVER GP-FRONT HOUSING
113-8987 COVER GP-FRONT HOUSING
POWER TAKE-OFF
COVER GP-FRONT HOUSING
290-7280 COVER GP-FRONT HOUSING
290-7280 COVER GP-FRONT HOUSING
PROVIDES A COVER GP FOR USE WHEN NO OIL FILLER IS SERVICED ON THE FRONT LEFT SIDE OF ENGINE
AN ATTACHMENT
GEAR GP-FRONT
222-3088 GEAR GP-FRONT
222-3088 GEAR GP-FRONT
HOUSING GP-FRONT
265-5081 HOUSING GP-FRONT
265-5081 HOUSING GP-FRONT
LIFTING GP-ENGINE
LIFTING GP-ENGINE
224-0880 LIFTING GP-ENGINE
224-0880 LIFTING GP-ENGINE
S/N S3C150-UP
ALSO AN ATTACHMENT
MOUNTING GP-ENGINE
SUPPORT GP-ENGINE
267-5588 SUPPORT GP-ENGINE
267-5588 SUPPORT GP-ENGINE
S/N S3C150-UP
FRONT, PROVIDES MOUNTING HOLES FOR FAN SHROUD
SUPPORT GP-ENGINE
268-1677 SUPPORT GP-ENGINE
268-1677 SUPPORT GP-ENGINE
FRONT, PROVIDES A RADIATOR MOUNTING PAD AND HOLES
AN ATTACHMENT
PAN GP-OIL
FASTENER GP-OIL PAN
287-3212 FASTENER GP-OIL PAN
287-3212 FASTENER GP-OIL PAN -ENGINE
S/N S3C150-UP
FOR USE WITH @@@@@287-3210@@@@@
ALSO AN ATTACHMENT
PAN GP-OIL
287-3210 PAN GP-OIL
287-3210 PAN GP-OIL -ENGINE
S/N S3C150-UP
PROVIDES A REAR SUMP ENGINE OIL PAN
FOR USE WITH @@@@@287-3212@@@@@
PAN GP-OIL
289-3675 PAN GP-OIL
289-3675 PAN GP-OIL -ENGINE
40-LITER. PROVIDES A FRONT SUMP CONFIGURATION. CONTAINS STANDARD DUTY DEEP SUMP OIL PAN AND INTERNAL LINES.
FOR USE WITH @@@@@287-3212@@@@@, LOW MOUNT OCV FILTER
AN ATTACHMENT
PISTON & ROD GP
PISTON & ROD GP
261-1506 PISTON & ROD GP
261-1506 PISTON & ROD GP
12.5 LITER. 17:1 COMPRESSION RATIO
POWER TAKE-OFF GP
FLANGE GP-OUTPUT SHAFT
117-2747 FLANGE GP-OUTPUT SHAFT
117-2747 FLANGE GP-OUTPUT SHAFT
FOR USE WITH CUSTOMER SUPPLIED PTO FLANGE
AN ATTACHMENT
PULLEY GP
FASTENER GP-DAMPER & PULLEY
268-8246 FASTENER GP-DAMPER & PULLEY
268-8246 FASTENER GP-DAMPER & PULLEY
PROVIDES DAMPER AND CRANKSHAFT PULLEY MOUNTING BOLTS AND SPACER
AN ATTACHMENT
PULLEY GP-CRANKSHAFT
284-4812 PULLEY GP-CRANKSHAFT
284-4812 PULLEY GP-CRANKSHAFT
S/N S3C150-UP
262.2-MM. PROVIDES A 10-RIB CRANKSHAFT PULLER
FOR USE WITH @@@@@268-8246@@@@@
ALSO AN ATTACHMENT
PULLEY GP-IDLER
299-5807 PULLEY GP-IDLER
299-5807 PULLEY GP-IDLER
S/N S3C150-UP
PROVIDES A 10-RIB IDLER PULLEY FOR NON-FAN APPLICATIONS
FOR USE WITH @@@@@281-3419@@@@@
SHAFT GP-STUB
FLANGE GP-OUTPUT SHAFT
117-2747 FLANGE GP-OUTPUT SHAFT
117-2747 FLANGE GP-OUTPUT SHAFT
FOR USE WITH CUSTOMER SUPPLIED PTO FLANGE
AN ATTACHMENT
VALVE MECHANISM GP
ACTUATOR AS-VALVE
348-7900 ACTUATOR AS-VALVE
348-7900 ACTUATOR AS-VALVE
S/N S3C150-UP
12 VOLT
PART OF 250-0012 ACTUATOR GP-VALVE
ALSO AN ATTACHMENT
ACTUATOR GP-VALVE
250-0012 ACTUATOR GP-VALVE
250-0012 ACTUATOR GP-VALVE
S/N S3C150-UP
PROVIDES A VARIABLE VALVE ACTUATOR WITH A 12-VOLT CAT BRAKE
FOR USE WITH @@@@@249-8981@@@@@
CANNOT BE USED WITH @@@@@250-0024@@@@@
ALSO AN ATTACHMENT
ACTUATOR GP-VALVE
250-0024 ACTUATOR GP-VALVE
250-0024 ACTUATOR GP-VALVE
PROVIDES A VARIABLE VALVE ACTUATOR WITH A 24-VOLT CAT BRAKE
FOR USE WITH @@@@@249-8981@@@@@
CANNOT BE USED WITH @@@@@250-0012@@@@@
AN ATTACHMENT
BASE GP-VALVE COVER & INJ HARN
288-3778 BASE GP-VALVE COVER & INJ HARN
288-3778 BASE GP-VALVE COVER & INJ HARN
S/N S3C150-UP
PROVIDES A BASE GP-VALVE FOR ENGINES WITH A BREATHER ASSEMBLY.
FOR USE WITH LOW MOUNT OCV FILTER SYSTEM
ALSO AN ATTACHMENT
COVER GP-VALVE MECHANISM
281-7829 COVER GP-VALVE MECHANISM
281-7829 COVER GP-VALVE MECHANISM
S/N S3C150-UP
FOR USE WITH ALL ENGINES WITH OR WITHOUT VVA
ALSO AN ATTACHMENT
FASTENER GP-VALVE COVER
286-0425 FASTENER GP-VALVE COVER
286-0425 FASTENER GP-VALVE COVER
S/N S3C150-UP
CANNOT BE USED WITH LINES GP-AIR COMPRESSOR WITH RESONATOR AND SUPPORT GP (AIR CLEANER)
LIFTER GP-VALVE
237-4376 LIFTER GP-VALVE
237-4376 LIFTER GP-VALVE -MECHANISM
PART OF 245-0495 VALVE MECHANISM GP
MOUNTING GP-VALVE MECHANISM
248-6667 MOUNTING GP-VALVE MECHANISM
248-6667 MOUNTING GP-VALVE MECHANISM
ROCKER ARM GP
260-0251 ROCKER ARM GP
260-0251 ROCKER ARM GP -UNIT INJECTOR
PART OF 260-0252, 396-4102 ROCKER ARM GP
ROCKER ARM GP
260-0252 ROCKER ARM GP
260-0252 ROCKER ARM GP
PART OF 245-0495 VALVE MECHANISM GP
ROCKER ARM GP
261-2290 ROCKER ARM GP
261-2290 ROCKER ARM GP -INLET
PART OF 260-0252 ROCKER ARM GP
ROCKER ARM GP
261-2294 ROCKER ARM GP
261-2294 ROCKER ARM GP -EXHAUST
PART OF 260-0252, 396-4102 ROCKER ARM GP
ROCKER ARM GP
385-4639 ROCKER ARM GP
385-4639 ROCKER ARM GP -INLET
PART OF 396-4102 ROCKER ARM GP
ROCKER ARM GP
396-4102 ROCKER ARM GP
396-4102 ROCKER ARM GP
PART OF 245-0495 VALVE MECHANISM GP
VALVE MECHANISM GP
245-0495 VALVE MECHANISM GP
245-0495 VALVE MECHANISM GP
Type 1
VALVE MECHANISM GP
245-0495 VALVE MECHANISM GP
245-0495 VALVE MECHANISM GP
Type 2

Information:

(For parts list, see above)

Specifications
Air Compressor
C13 On-highway Engine
Disassembly and Assembly
Air Compressor - Remove and Install
C13 Engine
Operation and Maintenance Manual
Compression Brake - Inspect/Adjust/Replace
C13 and C15 On-Highway Engines
Compression Brake - If Equipped
C13 and C15 On-Highway Engines
Systems Operation
Compression Brake
C13 On-Highway Engines
Specifications
Camshaft
C13 On-highway Engine
Reuse And Salvage Guidelines
Reuse and Salvage for Camshafts {1210, 1210}
Reuse and Salvage for Camshafts {1210, 1210}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Testing and Adjusting
Excessive Bearing Wear - Inspect
C13 On-Highway Engines
Disassembly and Assembly
Camshaft Gear - Remove and Install
C13 Engine
Camshaft Bearings - Remove
C13 Engine
Camshaft Bearings - Install
C13 Engine
Camshaft - Remove
C13 Engine
Camshaft - Install
C13 Engine
Engine News
A New Seal Sleeve Combination is Now Available for Field Repair on certain 3176, C9, C9.3, C10, C11, C12, and C13 Engines {1202}
A New Seal Sleeve Combination is Now Available for Field Repair on certain 3176, C9, C9.3, C10, C11, C12, and C13 Engines {1202}
Operation and Maintenance Manual
Crankshaft Vibration Damper - Inspect
C13 and C15 On-Highway Engines
Special Instruction
Procedure for Checking the Crankshaft's End Play{1202}
Procedure for Checking the Crankshaft's End Play{1202}
Specifications
Crankshaft Seals
C13 On-highway Engine
Connecting Rod Bearing Journal
C13 On-highway Engine
Crankshaft
C13 On-highway Engine
Main Bearing Journal
C13 On-highway Engine
Reuse And Salvage Guidelines
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Testing and Adjusting
Excessive Bearing Wear - Inspect
C13 On-Highway Engines
Main Bearings - Inspect
C13 On-Highway Engines
Disassembly and Assembly
Bearing Clearance - Check
C13 Engine
Crankshaft Main Bearings - Remove
C13 Engine
Crankshaft - Remove
C13 Engine
Crankshaft Rear Seal - Remove
C13 Engine
Crankshaft Rear Seal - Install
C13 Engine
Crankshaft Front Seal - Remove
C13 Engine
Crankshaft Front Seal - Install
C13 Engine
Crankshaft Main Bearings - Install
C13 Engine
Crankshaft - Install
C13 Engine
Service Magazine
A New Seal Sleeve Combination is Now Available for Field Repair on certain 3176, C9, C9.3, C10, C11, C12, and C13 Machine Engines {1202}
A New Seal Sleeve Combination is Now Available for Field Repair on certain 3176, C9, C9.3, C10, C11, C12, and C13 Machine Engines {1202}
Truck Engine News
A New Liner O-Ring Seal is Available for Certain C10 through C13 Truck Engines {1216, 7555}
2013/12/23
Engine News
A New Liner O-Ring Seal is Available for Certain C10 Through C13 Engines {1201, 7555}
2013/12/23
Operation and Maintenance Manual
Grounding Stud - Inspect/Clean/Tighten
C13 and C15 On-Highway Engines
Special Instruction
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Specifications
Piston Cooling Jet
C13 On-highway Engine
Cylinder Block
C13 On-highway Engine
Main Bearing Journal
C13 On-highway Engine
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Testing and Adjusting
Cylinder Block - Inspect
C13 On-Highway Engines
Cylinder Liner Projection - Inspect
C13 On-Highway Engines
Excessive Bearing Wear - Inspect
C13 On-Highway Engines
Main Bearings - Inspect
C13 On-Highway Engines
Disassembly and Assembly
Bearing Clearance - Check
C13 Engine
Piston Cooling Jets - Remove and Install
C13 Engine
Cylinder Liner - Install
C13 Engine
Crankshaft Main Bearings - Remove
C13 Engine
Camshaft Bearings - Remove
C13 Engine
Camshaft Bearings - Install
C13 Engine
Cylinder Liner - Remove
C13 Engine
Crankshaft Main Bearings - Install
C13 Engine
Operation and Maintenance Manual
Grounding Stud - Inspect/Clean/Tighten
C13 and C15 On-Highway Engines
Special Instruction
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Specifications
Cylinder Head
C13 On-highway Engine
Cylinder Head Valves
C13 On-highway Engine
Tool Operating Manual
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Reuse And Salvage Guidelines
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Testing and Adjusting
Engine Valve Lash - Inspect/Adjust
C13 On-Highway Engines
Disassembly and Assembly
Inlet and Exhaust Valve Seat Inserts - Remove and Install
C13 Engine
Inlet and Exhaust Valves - Remove and Install
C13 Engine
Camshaft Bearings - Remove
C13 Engine
Camshaft Bearings - Install
C13 Engine
Electronic Unit Injector Sleeve - Remove
C13 Engine
Electronic Unit Injector Sleeve - Install
C13 Engine
Rocker Arm and Shaft - Remove
C13 Engine
Rocker Arm and Shaft - Install
C13 Engine
Inlet and Exhaust Valve Springs - Remove and Install
C13 Engine
Cylinder Head - Remove
C13 Engine
Cylinder Head - Install
C13 Engine
Inlet and Exhaust Valve Guides - Remove and Install
C13 Engine
Operation and Maintenance Manual
Crankshaft Vibration Damper - Inspect
C13 and C15 On-Highway Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Testing and Adjusting
Vibration Damper - Check
C13 On-Highway Engines
Disassembly and Assembly
Vibration Damper and Pulley - Remove and Install
C13 Engine
Accessory Drive - Remove
C13 Engine
Accessory Drive - Install
C13 Engine
Accessory Drive - Disassemble
C13 Engine
Accessory Drive - Assemble
C13 Engine
Operation and Maintenance Manual
Fan Drive Bearing - Lubricate
C13 and C15 On-Highway Engines
Special Instruction
Oil and Your Engine {1000}
Oil and Your Engine {1000}
Service Magazine
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Reuse And Salvage Guidelines
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Specifications
Flywheel
C13 On-highway Engine
Reuse And Salvage Guidelines
Reuse and Salvage for Flywheel Assemblies {1156}
Reuse and Salvage for Flywheel Assemblies {1156}
Testing and Adjusting
Flywheel - Inspect
C13 On-Highway Engines
Disassembly and Assembly
Flywheel - Remove
C13 Engine
Flywheel - Install
C13 Engine
Specifications
Gear Group (Front)
C13 On-highway Engine
Reuse And Salvage Guidelines
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Testing and Adjusting
Gear Group (Front) - Time
C13 On-Highway Engines
Disassembly and Assembly
Gear Group (Front) - Remove
C13 Engine
Gear Group (Front) - Install
C13 Engine
Testing and Adjusting
Flywheel Housing - Inspect
C13 On-Highway Engines
Disassembly and Assembly
Flywheel Housing - Remove and Install
C13 Engine
Specifications
Crankshaft Seals
C13 On-highway Engine
Front Housing and Covers
C13 On-highway Engine
Reuse And Salvage Guidelines
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Disassembly and Assembly
Housing (Front) - Remove
C13 Engine
Housing (Front) - Install
C13 Engine
Front Cover - Remove
C13 Engine
Front Cover - Install
C13 Engine
Specifications
Engine Support (Front)
C13 On-highway Engine
Engine Support (Front)
C13 On-highway Engine
Engine Oil Pan
C13 On-highway Engine
Disassembly and Assembly
Engine Oil Pan - Remove and Install
C13 Engine
Special Instruction
Correct Combinations of Connecting Rods Allowed in Remanufactured Cylinder Packs for Certain C13 Engines{1218, 1225, 1239}
Correct Combinations of Connecting Rods Allowed in Remanufactured Cylinder Packs for Certain C13 Engines{1218, 1225, 1239}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Technical Information Bulletin
Specifications
Piston Cooling Jet
C13 On-highway Engine
Piston and Rings
C13 On-highway Engine
Connecting Rod
C13 On-highway Engine
Connecting Rod Bearing Journal
C13 On-highway Engine
Tool Operating Manual
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
Reuse And Salvage Guidelines
Reuse and Salvage for Connecting Rods {1218}
Reuse and Salvage for Connecting Rods {1218}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Testing and Adjusting
Engine Crankcase Pressure (Blowby) - Test
C13 On-Highway Engines
Cylinder Liner Projection - Inspect
C13 On-Highway Engines
Excessive Bearing Wear - Inspect
C13 On-Highway Engines
Connecting Rod Bearings - Inspect
C13 On-Highway Engines
Piston Ring Groove - Inspect
C13 On-Highway Engines
Compression - Test
C13 On-Highway Engines
Disassembly and Assembly
Bearing Clearance - Check
C13 Engine
Piston Cooling Jets - Remove and Install
C13 Engine
Pistons and Connecting Rods - Disassemble
C13 Engine
Pistons and Connecting Rods - Assemble
C13 Engine
Connecting Rod Bearings - Remove
C13 Engine
Connecting Rod Bearings - Install
C13 Engine
Pistons and Connecting Rods - Remove
C13 Engine
Pistons and Connecting Rods - Install
C13 Engine
Rear Power Take-Off (RPTO) - Remove and Install
C13 Engine
Operation and Maintenance Manual
Crankshaft Vibration Damper - Inspect
C13 and C15 On-Highway Engines
Specifications
Mounting Bracket (Idler Pulley)
C13 On-highway Engine
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Disassembly and Assembly
Vibration Damper and Pulley - Remove and Install
C13 Engine
Special Instruction
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Technical Information Bulletin
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Tool Operating Manual
NEHS0566 <NOBR> 4C-9832</NOBR> Large Engine Roll-Over Stand {0599, 0701}
NEHS0566 4C-9832 Large Engine Roll-Over Stand {0599, 0701}
NEHS0733: <NOBR>159-9404</NOBR> Counterbore Tool Group For C10 through C13 {0705}
NEHS0733: 159-9404 Counterbore Tool Group For C10 through C13 {0705}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Reuse And Salvage Guidelines
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Service Magazine
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Operation and Maintenance Manual
Belts - Inspect/Adjust/Replace
C13 and C15 On-Highway Engines
Engine Valve Rotators - Inspect
C13 and C15 On-Highway Engines
Compression Brake - If Equipped
C13 and C15 On-Highway Engines
Engine Valve Lash - Check
C13 and C15 On-Highway Engines
Valve Actuators - Check
C13 and C15 On-Highway Engines
Special Instruction
Replacing Low Pressure Actuator Valves{1130}
Replacing Low Pressure Actuator Valves{1130}
Specifications
Rocker Shaft
C13 On-highway Engine
Valve Rocker Arm
C13 On-highway Engine
Valve Mechanism
C13 On-highway Engine
Electronic Unit Injector Rocker Arm
C13 On-highway Engine
Reuse And Salvage Guidelines
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Testing and Adjusting
Finding Top Center Position for No. 1 Piston
C13 On-Highway Engines
Engine Valve Lash - Inspect/Adjust
C13 On-Highway Engines
Disassembly and Assembly
Lifter Group - Remove and Install
C13 Engine
Rocker Arm and Shaft - Remove
C13 Engine
Rocker Arm and Shaft - Install
C13 Engine
Rocker Arm - Disassemble
C13 Engine
Rocker Arm - Assemble
C13 Engine
Valve Actuator (Variable) - Remove and Install
C13 Engine
Valve Mechanism Cover - Remove and Install
C13 Engine
Valve Mechanism Cover Base - Remove and Install
C13 Engine
Reuse And Salvage Guidelines
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}

Truck sale:

Caterpillar C13, Construction
25,800 
Caterpillar C13, Construction
- mobile generator sets
MOHAMED ABDULRAHMAN AL-BAHAR
Kuwait
Caterpillar C13, Construction
27,300 
Caterpillar C13, Construction
- mobile generator sets
MOHAMED ABDULRAHMAN AL-BAHAR
Kuwait
 
 
Caterpillar C13, Construction
- Stationary Generator Sets
STET, SA
Portugal
Caterpillar C13, Construction
68,500 
Caterpillar C13, Construction
- Stationary Generator Sets
PANTROPIC POWER SYSTEMS
CATERPILLAR C13 2014
 
CATERPILLAR C13 2014
- STATIONARY GENERATOR SETS
PANTROPIC POWER
8205 N.W. 58th Street - Miami - Florid
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.