C7 On-highway Engine LBM00001-UP BASIC ENGINE Caterpillar SIS

TRUCK ENGINE C7 TRUCK ENGINE LBM
C7 On-highway Engine LBM00001-UP SEBP4763 C7 LBM (2006)

Parts group C7:

For full view, you need register

BASIC ENGINE

ADAPTER GP-ENGINE TO XMSN

100-4029 ADAPTER GP-ENGINE TO XMSN

100-4029 ADAPTER GP-ENGINE TO XMSN
FOR USE WITH SAE NO. 2
AN ATTACHMENT

107-2781 ADAPTER GP-ENGINE TO XMSN

107-2781 ADAPTER GP-ENGINE TO XMSN
FOR USE WITH SAE NO. 1 FLYWHEEL HOUSING
AN ATTACHMENT

108-4923 ADAPTER GP-ENGINE TO XMSN

108-4923 ADAPTER GP-ENGINE TO XMSN
FOR USE WITH SPACERLESS TRANSMISSIONS
AN ATTACHMENT

117-0508 ADAPTER GP-ENGINE TO XMSN

117-0508 ADAPTER GP-ENGINE TO XMSN
FOR USE WITH @@@@@145-9974@@@@@, @@@@@151-0163@@@@@, SPACERLESS MANUAL TRANSMISSION, AUTOMATIC TRANSMISSION WITH ADAPTER
AN ATTACHMENT

117-3440 ADAPTER GP-ENGINE TO XMSN

117-3440 ADAPTER GP-ENGINE TO XMSN
FLEX PLATE AND HUB
FOR USE WITH @@@@@108-4923@@@@@, SPACERLESS TRANSMISSION
AN ATTACHMENT

133-5003 ADAPTER GP-ENGINE TO XMSN

133-5003 ADAPTER GP-ENGINE TO XMSN
FOR USE WITH @@@@@129-1175@@@@@, SAE # 3 VERTICAL MOUNTING PADS WITH L.H. STARTER
AN ATTACHMENT

145-9974 ADAPTER GP-ENGINE TO XMSN

145-9974 ADAPTER GP-ENGINE TO XMSN
ADAPTS SAE NO. 3 FLANGE TO SAE NO. 2 FLYWHEEL HOUSING
FOR USE WITH @@@@@117-0508@@@@@
AN ATTACHMENT

151-0163 ADAPTER GP-ENGINE TO XMSN

151-0163 ADAPTER GP-ENGINE TO XMSN
PROVIDES ADAPTER RING FOR TORQUE CONVERTERS TO ENGINE MOUNTED FLEX PLATE
FOR USE WITH @@@@@117-0508@@@@@, @@@@@133-5003@@@@@, @@@@@161-0200@@@@@
AN ATTACHMENT

161-9214 ADAPTER GP-ENGINE TO XMSN

161-9214 ADAPTER GP-ENGINE TO XMSN
FOR USE WITH SAE NO. 2 FLYWHEEL HOUSING WITH L.H. STARTER
AN ATTACHMENT

165-4059 ADAPTER GP-ENGINE TO XMSN

165-4059 ADAPTER GP-ENGINE TO XMSN
PROVIDES ADAPTER FOR SAE NO. 2 FLYWHEEL
FOR USE WITH @@@@@161-9214@@@@@
AN ATTACHMENT

263-4019 ADAPTER GP-ENGINE TO XMSN

263-4019 ADAPTER GP-ENGINE TO XMSN
FOR USE WITH SAE NO.2 FLYWHEEL HOUSING
AN ATTACHMENT

263-4021 ADAPTER GP-ENGINE TO XMSN

263-4021 ADAPTER GP-ENGINE TO XMSN
FOR USE WITH SAE NO. 12 FLYWHEEL HOUSING WITH LEFT HAND STARTER
AN ATTACHMENT

AIR COMPRESSOR GP

4P-5435 AIR COMPRESSOR AS

4P-5435 AIR COMPRESSOR AS
13.2 CFM AT 1250 RPM. TU-FLO 550
FIELD REPLACEMENT FOR @@@@@125-9562@@@@@

125-9562 AIR COMPRESSOR GP

125-9562 AIR COMPRESSOR GP
13.2 CFM AT 1250 RPM. TU-FLO 550
PART OF 235-3986 AIR COMPRESSOR GP
FIELD REPLACEMENT ORDER @@@@@ 4P-5435@@@@@
AN ATTACHMENT

149-4915 AIR COMPRESSOR GP

149-4915 AIR COMPRESSOR GP
S/N LBM102-UP
13.2 CFM AT 1250 RPM. TU-FLO 550
PART OF 229-0441, 235-3987, 235-3989, 235-3990, 255-5545, 389-9576 AIR COMPRESSOR GP
ALSO AN ATTACHMENT

164-7559 AIR COMPRESSOR GP

164-7559 AIR COMPRESSOR GP
16.5 CFM AT 1250 RPM. TU-FLO 750
PART OF 238-6652, 238-7870, 255-5546, 389-9577 AIR COMPRESSOR GP
AN ATTACHMENT

178-9497 AIR COMPRESSOR GP

178-9497 AIR COMPRESSOR GP
13.2 CFM AT 1250 RPM
PART OF 235-1584 AIR COMPRESSOR GP
FOR USE WITH TU-FLO 550 COMPRESSOR WITH DRIVE GEAR, 31MM DIAMETER SHAFT GAUGE
AN ATTACHMENT

191-6521 AIR COMPRESSOR GP

191-6521 AIR COMPRESSOR GP
15.7 CFM AT 1250 RPM. SINGLE CYLINDER
PART OF 243-4951, 245-4684 AIR COMPRESSOR GP
AN ATTACHMENT

224-0003 AIR COMPRESSOR GP

224-0003 AIR COMPRESSOR GP
10.9 CFM AT 1250 RPM
PART OF 235-3991 AIR COMPRESSOR GP
Type 1
AN ATTACHMENT

224-0003 AIR COMPRESSOR GP

224-0003 AIR COMPRESSOR GP
10.9 CFM AT 1250 RPM
PART OF 235-3991 AIR COMPRESSOR GP
Type 2
AN ATTACHMENT

228-4685 AIR COMPRESSOR GP

228-4685 AIR COMPRESSOR GP
15.7 CFM AT 1250 RPM. SINGLE CYLINDER
Type 1
AN ATTACHMENT

228-4685 AIR COMPRESSOR GP

228-4685 AIR COMPRESSOR GP
15.7 CFM AT 1250 RPM. SINGLE CYLINDER
Type 2
AN ATTACHMENT

229-0441 AIR COMPRESSOR GP

229-0441 AIR COMPRESSOR GP
13.2 CFM AT 1250 RPM. WITHOUT GOVERNOR. TOP AIR INLET WITH TEE AND CHECK VALVE IN AIR DISCHARGE.
FOR USE WITH @@@@@142-8332@@@@@, @@@@@156-9641@@@@@
AN ATTACHMENT

235-1584 AIR COMPRESSOR GP

235-1584 AIR COMPRESSOR GP
WITHOUT GOVERNOR
FOR USE WITH HIGH CAPACITY HYDRAULIC PUMPS, AIR AND WATER LINES GPS
AN ATTACHMENT

235-3986 AIR COMPRESSOR GP

235-3986 AIR COMPRESSOR GP
13.2 CFM AT 1250 RPM. WITHOUT GOVERNOR
FOR USE WITH AIR AND WATER LINES GPS
AN ATTACHMENT

235-3987 AIR COMPRESSOR GP

235-3987 AIR COMPRESSOR GP
13.2 CFM AT 1250 RPM. WITH GOVERNOR
Type 1
FOR USE WITH AIR AND WATER LINES GPS
AN ATTACHMENT

235-3987 AIR COMPRESSOR GP

235-3987 AIR COMPRESSOR GP
13.2 CFM AT 1250 RPM. WITH GOVERNOR
Type 2
FOR USE WITH AIR AND WATER LINES GPS
AN ATTACHMENT

235-3989 AIR COMPRESSOR GP

235-3989 AIR COMPRESSOR GP
S/N LBM102-UP
13.2 CFM AT 1250 RPM. WITHOUT GOVERNOR
Type 1
FOR USE WITH AIR AND WATER LINES GPS
ALSO AN ATTACHMENT

235-3989 AIR COMPRESSOR GP

235-3989 AIR COMPRESSOR GP
S/N LBM102-UP
13.2 CFM AT 1250 RPM. WITHOUT GOVERNOR
Type 2
FOR USE WITH AIR AND WATER LINES GPS
ALSO AN ATTACHMENT

235-3990 AIR COMPRESSOR GP

235-3990 AIR COMPRESSOR GP
13.2 CFM AT 1250 RPM. WITH GOVERNOR
FOR USE WITH AIR AND WATER LINES GPS
AN ATTACHMENT

235-3991 AIR COMPRESSOR GP

235-3991 AIR COMPRESSOR GP
10.9 CFM AT 1250 RPM. WITHOUT GOVERNOR
FOR USE WITH AIR COMPRESSOR WATER LINES GP AND AIR LINES GP
AN ATTACHMENT

238-6652 AIR COMPRESSOR GP

238-6652 AIR COMPRESSOR GP
REQUIRES AIR COMPRESSOR WATER LINES GP
FOR USE WITH @@@@@151-0864@@@@@
AN ATTACHMENT

238-7870 AIR COMPRESSOR GP

238-7870 AIR COMPRESSOR GP
TU-FLO 750
Type 1
FOR USE WITH @@@@@151-0864@@@@@, AIR COMPRESSOR WATER LINES GP
AN ATTACHMENT

238-7870 AIR COMPRESSOR GP

238-7870 AIR COMPRESSOR GP
TU-FLO 750
Type 2
FOR USE WITH @@@@@151-0864@@@@@, AIR COMPRESSOR WATER LINES GP
AN ATTACHMENT

243-4951 AIR COMPRESSOR GP

243-4951 AIR COMPRESSOR GP
REQUIRES LINES GP-AIR COMPRESSOR(WATER) AND LINES GP-AIR COMPRESSOR (AIR)
AN ATTACHMENT

245-4684 AIR COMPRESSOR GP

245-4684 AIR COMPRESSOR GP
FOR USE WITH @@@@@228-9653@@@@@, @@@@@233-5202@@@@@, @@@@@233-3661@@@@@, @@@@@228-9654@@@@@
AN ATTACHMENT

255-5545 AIR COMPRESSOR GP

255-5545 AIR COMPRESSOR GP
SIDE AND TOP 1/2-14 NPT AIR INLET, 44 FT-LBS DRIVE THRU CAPACITY. PROVIDES AIR COMPRESSOR WITHOUT GOVERNOR
FOR USE WITH AIR COMPRESSOR WATER AND AIR LINES GROUPS , AND OIL LINE ROUTING COMPATIBLE WITH KENWORTH POWER STEERING PUMP
AN ATTACHMENT

255-5546 AIR COMPRESSOR GP

255-5546 AIR COMPRESSOR GP
SIDE AND TOP 1/2-14 NPT AIR INLET, 44 FT-LBS DRIVE THRU CAPACITY
FOR USE WITH @@@@@151-0864@@@@@, AIR COMPRESSOR WATER LINES GROUP, OIL LINE ROUTING COMPATIBLE WITH KENWORTH POWER STEERING PUMP
AN ATTACHMENT

266-3305 AIR COMPRESSOR GP

266-3305 AIR COMPRESSOR GP
16.1 CFM AT 1250 RPM
PART OF 272-5955 AIR COMPRESSOR GP
AN ATTACHMENT

272-5955 AIR COMPRESSOR GP

272-5955 AIR COMPRESSOR GP
PROVIDES A CAT 270 AIR COMPRESSOR GROUP. REQUIRES LINES COMPRESSOR (WATER) AND AIR SUPPLY LINE.
Type 1
AN ATTACHMENT

272-5955 AIR COMPRESSOR GP

272-5955 AIR COMPRESSOR GP
PROVIDES A CAT 270 AIR COMPRESSOR GROUP. REQUIRES LINES COMPRESSOR (WATER) AND AIR SUPPLY LINE.
Type 2
AN ATTACHMENT

272-5955 AIR COMPRESSOR GP

272-5955 AIR COMPRESSOR GP
PROVIDES A CAT 270 AIR COMPRESSOR GROUP. REQUIRES LINES COMPRESSOR (WATER) AND AIR SUPPLY LINE.
Type 3
AN ATTACHMENT

304-9986 AIR COMPRESSOR GP

304-9986 AIR COMPRESSOR GP
16.1 CFM AT 1250 RPM
PART OF 272-5955 AIR COMPRESSOR GP
AN ATTACHMENT

314-6148 AIR COMPRESSOR GP

314-6148 AIR COMPRESSOR GP
16.1 CFM AT 1250 RPM
PART OF 272-5955 AIR COMPRESSOR GP
AN ATTACHMENT

346-3672 AIR COMPRESSOR GP

346-3672 AIR COMPRESSOR GP
FIELD INSTALLATION

353-7135 AIR COMPRESSOR GP

353-7135 AIR COMPRESSOR GP
PART OF 228-4685 AIR COMPRESSOR GP
AN ATTACHMENT

385-0935 AIR COMPRESSOR GP

385-0935 AIR COMPRESSOR GP
PART OF 228-4685 AIR COMPRESSOR GP
AN ATTACHMENT

389-9576 AIR COMPRESSOR GP

389-9576 AIR COMPRESSOR GP
S/N LBM102-UP
PART OF 235-3987, 235-3989 AIR COMPRESSOR GP
ALSO AN ATTACHMENT

389-9577 AIR COMPRESSOR GP

389-9577 AIR COMPRESSOR GP
BASIC
PART OF 238-7870 AIR COMPRESSOR GP
AN ATTACHMENT

120-9126 FITTING GP-AIR COMPRESSOR

120-9126 FITTING GP-AIR COMPRESSOR
PROVIDES FITTINGS FOR INSTALLATION OF CUSTOMER SUPPLIED AIR COMPRESSOR TEE CONNECTION
AN ATTACHMENT

178-2629 FITTING GP-AIR COMPRESSOR

178-2629 FITTING GP-AIR COMPRESSOR
PROVIDES FITTINGS FOR INSTALLATION OF CUSTOMER SUPPLIED AIR COMPRESSOR
AN ATTACHMENT

195-7414 FITTING GP-AIR COMPRESSOR

195-7414 FITTING GP-AIR COMPRESSOR
S/N LBM102-UP
PROVIDES QUICK DISCONNECTS ON COMPRESSOR FOR AIR OUTLET AND CUSTOMER SUPPLIED GOVERNOR
ALSO AN ATTACHMENT

206-2049 FITTING GP-AIR COMPRESSOR

206-2049 FITTING GP-AIR COMPRESSOR
CANNOT BE USED WITH @@@@@160-7075@@@@@
AN ATTACHMENT

118-7281 LINES GP-AIR COMPRESSOR

118-7281 LINES GP-AIR COMPRESSOR
AN ATTACHMENT

142-8332 LINES GP-AIR COMPRESSOR

142-8332 LINES GP-AIR COMPRESSOR
S/N LBM102-UP
FOR USE WITH AIR COMPRESSOR WITH TOP AIR INLET
ALSO AN ATTACHMENT

156-9641 LINES GP-AIR COMPRESSOR

156-9641 LINES GP-AIR COMPRESSOR
FOR USE WITH AIR COMPRESSOR WITH SIDE AIR INLET
AN ATTACHMENT

161-0217 LINES GP-AIR COMPRESSOR

161-0217 LINES GP-AIR COMPRESSOR
FOR USE WITH AIR COMPRESSOR THAT WILL TAKE SIDE MOUNTING ELBOW
AN ATTACHMENT

225-9001 LINES GP-AIR COMPRESSOR

225-9001 LINES GP-AIR COMPRESSOR
FOR USE WITH @@@@@153-9717@@@@@, COOLANT CONDITIONER GPS
AN ATTACHMENT

228-9653 LINES GP-AIR COMPRESSOR

228-9653 LINES GP-AIR COMPRESSOR -WATER
AN ATTACHMENT

228-9654 LINES GP-AIR COMPRESSOR

228-9654 LINES GP-AIR COMPRESSOR
FOR USE WITH @@@@@239-9353@@@@@
CANNOT BE USED WITH FRONT MOUNT FUEL FILTER, WOODEN SHIPPING SKIDS
AN ATTACHMENT

229-6925 LINES GP-AIR COMPRESSOR

229-6925 LINES GP-AIR COMPRESSOR -WATER
S/N LBM102-UP
FOR USE WITH @@@@@213-1640@@@@@, SHORT FRONT WATER PUMP
CANNOT BE USED WITH MOUNTING GP OR FASTENER GP THAT INCLUDE HARDWARE AT UPPER LEFT CORNER OF AIR INLET COVER
ALSO AN ATTACHMENT

232-2570 LINES GP-AIR COMPRESSOR

232-2570 LINES GP-AIR COMPRESSOR
CANNOT BE USED WITH @@@@@211-7845@@@@@, @@@@@111-7245@@@@@, @@@@@183-4498@@@@@, @@@@@213-1630@@@@@, FRONT MOUNT FUEL FILTER
AN ATTACHMENT

233-3661 LINES GP-AIR COMPRESSOR

233-3661 LINES GP-AIR COMPRESSOR
FOR USE WITH @@@@@211-7845@@@@@, @@@@@213-1640@@@@@, @@@@@228-8927@@@@@
AN ATTACHMENT

233-5202 LINES GP-AIR COMPRESSOR

233-5202 LINES GP-AIR COMPRESSOR
FOR USE WITH @@@@@219-7448@@@@@, @@@@@228-8927@@@@@
AN ATTACHMENT

233-9817 LINES GP-AIR COMPRESSOR

233-9817 LINES GP-AIR COMPRESSOR
S/N LBM1-101
FOR USE WITH @@@@@211-7845@@@@@, @@@@@213-1640@@@@@, @@@@@228-8927@@@@@
AN ATTACHMENT

233-9817 LINES GP-AIR COMPRESSOR

233-9817 LINES GP-AIR COMPRESSOR
S/N LBM102-UP
FOR USE WITH @@@@@211-7845@@@@@, @@@@@213-1640@@@@@, @@@@@228-8927@@@@@
AN ATTACHMENT

236-5284 LINES GP-AIR COMPRESSOR

236-5284 LINES GP-AIR COMPRESSOR
S/N LBM1-101
REQUIRES USE OF WATER REGULATOR WITH INBOARD REAR PORT OPEN.
FOR USE WITH @@@@@231-3305@@@@@, @@@@@212-3695@@@@@
AN ATTACHMENT

236-5284 LINES GP-AIR COMPRESSOR

236-5284 LINES GP-AIR COMPRESSOR
S/N LBM102-UP
REQUIRES USE OF WATER REGULATOR WITH INBOARD REAR PORT OPEN.
FOR USE WITH @@@@@231-3305@@@@@, @@@@@212-3695@@@@@
AN ATTACHMENT

236-6998 LINES GP-AIR COMPRESSOR

236-6998 LINES GP-AIR COMPRESSOR
FOR USE WITH @@@@@211-7845@@@@@, @@@@@213-1640@@@@@
AN ATTACHMENT

239-5919 LINES GP-AIR COMPRESSOR

239-5919 LINES GP-AIR COMPRESSOR
FOR USE WITH @@@@@235-3991@@@@@, @@@@@239-9353@@@@@
CANNOT BE USED WITH FRONT MOUNT FUEL FILTER
AN ATTACHMENT

246-1565 LINES GP-AIR COMPRESSOR

246-1565 LINES GP-AIR COMPRESSOR
FOR USE WITH AIR COMPRESSOR WITHOUT INTEGRAL CHECK VALVE
AN ATTACHMENT

219-7444 MOUNTING GP-AIR COMPRESSOR

219-7444 MOUNTING GP-AIR COMPRESSOR
PROVIDES COMPRESSOR OR PULLEY MOUNTING BRACKET
FOR USE WITH @@@@@219-7448@@@@@
CANNOT BE USED WITH @@@@@200-1212@@@@@
AN ATTACHMENT

241-4958 MOUNTING GP-AIR COMPRESSOR

241-4958 MOUNTING GP-AIR COMPRESSOR
FOR USE WITH @@@@@200-1212@@@@@, @@@@@238-5493@@@@@, @@@@@219-7448@@@@@
AN ATTACHMENT

238-4733 PLUG GP-AIR COMPRESSOR

238-4733 PLUG GP-AIR COMPRESSOR
PROVIDES PLUG GP WHEN NO AIR COMPRESSOR WATER LINES GP IS USED.
FOR USE WITH @@@@@219-7448@@@@@
AN ATTACHMENT

BELT TIGHTENER GP

124-7786 BELT TENSIONER GP

124-7786 BELT TENSIONER GP
CANNOT BE USED WITH CUSTOMER SUPPLIED REFRIGERANT COMPRESSOR
AN ATTACHMENT

200-2292 BELT TENSIONER GP

200-2292 BELT TENSIONER GP
CLOCKWISE
FOR USE WITH SHORT FRONT END WATER PUMPS AND HIGH FAN CENTERS
AN ATTACHMENT

220-1210 BELT TENSIONER GP

220-1210 BELT TENSIONER GP
PART OF 238-5493 BELT TENSIONER GP, 219-7448 MOUNTING GP-FAN
FOR USE WITH @@@@@211-7845@@@@@, @@@@@213-1640@@@@@, SHORT FRONT END WATER PUMPS AND LOW FAN CENTERS
AN ATTACHMENT

238-5493 BELT TENSIONER GP

238-5493 BELT TENSIONER GP
PROVIDES A NO FAN ALTERNATOR MOUNTING GP FOR SHORT FRONT END.
FOR USE WITH @@@@@200-1208@@@@@, @@@@@200-1209@@@@@, @@@@@200-2299@@@@@
CANNOT BE USED WITH @@@@@200-1212@@@@@, @@@@@197-9564@@@@@
AN ATTACHMENT

273-7523 BELT TENSIONER GP

273-7523 BELT TENSIONER GP
PROVIDES MOUNTING BRACKET FOR A PAD-MOUNT ALTERNATOR FOR SHORT FRONT END
FOR USE WITH @@@@@200-1208@@@@@, @@@@@200-2299@@@@@, @@@@@273-7540@@@@@, @@@@@142-8100@@@@@, @@@@@200-1212@@@@@, @@@@@197-9564@@@@@, @@@@@206-2044@@@@@
AN ATTACHMENT

275-9349 BELT TENSIONER GP

275-9349 BELT TENSIONER GP
FOR USE WITH @@@@@275-9348@@@@@, @@@@@200-2299@@@@@, @@@@@200-1208@@@@@, PUMP GP-WATER (8-RIB)
CANNOT BE USED WITH @@@@@153-5417@@@@@, PULLEY GP-FAN
AN ATTACHMENT

120-6661 IDLER GP-BELT

120-6661 IDLER GP-BELT
FOR USE WITH @@@@@125-3721@@@@@, @@@@@142-7107@@@@@, @@@@@143-7018@@@@@, ENGINES EQUIPPED WITH ADJUSTABLE FAN BRACKET
AN ATTACHMENT

192-1563 IDLER GP-BELT

192-1563 IDLER GP-BELT -ALTERNATOR, REFRIGERANT COMPRESSOR
PART OF 273-7523 BELT TENSIONER GP, 273-7527 MOUNTING GP-ALTERNATOR & COMPR
AN ATTACHMENT

197-9646 IDLER GP-BELT

197-9646 IDLER GP-BELT
FOR USE WITH COMPRESSORS WITHOUT FREON AND LOW FAN CENTERS
AN ATTACHMENT

197-9651 IDLER GP-BELT

197-9651 IDLER GP-BELT
74MM FLAT IDLER FOR 8 GROOVE POLY RIB BELT
AN ATTACHMENT

219-7464 IDLER GP-BELT

219-7464 IDLER GP-BELT
FOR USE WITH @@@@@219-7444@@@@@, @@@@@219-7448@@@@@, SHORT FRONT END ACCESSORY DRIVE
CANNOT BE USED WITH CUSTOMER PROVIDED 8 GROOVE REFRIG COMPRESSOR
AN ATTACHMENT

CAMSHAFT GP

212-4285 CAMSHAFT GP

212-4285 CAMSHAFT GP
FOR USE WITH @@@@@205-1321@@@@@

COMPRESSOR GP-REFRIGERANT

213-1640 MOUNTING GP-ALTERNATOR & COMPR

213-1640 MOUNTING GP-ALTERNATOR & COMPR
S/N LBM102-UP
ALSO AN ATTACHMENT

273-7527 MOUNTING GP-ALTERNATOR & COMPR

273-7527 MOUNTING GP-ALTERNATOR & COMPR
PROVIDES 2 PIECE MOUNTING OF A PAD-MOUNT REFRIGERANT COMPRESSOR & PAD-MOUNT ALTERNATOR
FOR USE WITH @@@@@206-2044@@@@@, @@@@@273-7538@@@@@, @@@@@275-9347@@@@@, FAN OR WITHOUT FAN
AN ATTACHMENT

283-0048 MOUNTING GP-ALTERNATOR & COMPR

283-0048 MOUNTING GP-ALTERNATOR & COMPR
PROVIDES 2 PIECE MTG OF FAN DRIVE (FAN HEIGHTS 250 TO 468-MM);PAD MOUNTED A/C COMPRESSOR AND PAD MOUNTED ALTERNATOR, FOR SHORT FRONT END
FOR USE WITH @@@@@142-8100@@@@@, @@@@@180-9492@@@@@, @@@@@200-1208@@@@@, @@@@@200-1209@@@@@, @@@@@200-2299@@@@@, @@@@@200-1212@@@@@, @@@@@197-9564@@@@@, @@@@@206-2044@@@@@, @@@@@200-2269@@@@@
AN ATTACHMENT

120-6656 MOUNTING GP-REFRIGERANT COMPR

120-6656 MOUNTING GP-REFRIGERANT COMPR
FOR USE WITH @@@@@142-7107@@@@@, 8-GROOVE CRANKSHAFT PULLEY
AN ATTACHMENT

127-5180 MOUNTING GP-REFRIGERANT COMPR

127-5180 MOUNTING GP-REFRIGERANT COMPR
WITH BELT TIGHTENER
FOR USE WITH 8-GROOVE CRANKSHAFT PULLEY, FAN DRIVE, IDLER GP, AND ALTERNATOR MTG
CANNOT BE USED WITH @@@@@227-8843@@@@@, @@@@@228-6092@@@@@, @@@@@235-2841@@@@@
AN ATTACHMENT

132-9335 MOUNTING GP-REFRIGERANT COMPR

132-9335 MOUNTING GP-REFRIGERANT COMPR
WITH BELT TIGHTENER
FOR USE WITH LARGER POWER-LINE ALTERNATOR, 8 GROOVE CRANKSHAFT PULLEY
AN ATTACHMENT

276-7587 MOUNTING GP-REFRIGERANT COMPR

276-7587 MOUNTING GP-REFRIGERANT COMPR
PROVIDES 2-PIECE REFRIGERANT COMPRESSOR MOUNTING GP.
PART OF 273-7527 MOUNTING GP-ALTERNATOR & COMPR
FOR USE WITH @@@@@273-7527@@@@@
AN ATTACHMENT

CRANKSHAFT GP

210-5590 CRANKSHAFT GP

210-5590 CRANKSHAFT GP
S/N LBM1-100

210-5590 CRANKSHAFT GP

210-5590 CRANKSHAFT GP
S/N LBM101-101

210-5590 CRANKSHAFT GP

210-5590 CRANKSHAFT GP
S/N LBM102-UP

122-8929 SEAL GP-CRANKSHAFT

122-8929 SEAL GP-CRANKSHAFT
S/N LBM102-UP
FOR USE WITH DRY FLYWHEEL HOUSING
ALSO AN ATTACHMENT

187-8964 SEAL GP-CRANKSHAFT

187-8964 SEAL GP-CRANKSHAFT
COUNTER CLOCKWISE ROTATION. REAR
PART OF 188-7121 GEAR GP-REAR
AN ATTACHMENT

CYLINDER BLOCK GP

222-5947 COVER GP-CYLINDER BLOCK

222-5947 COVER GP-CYLINDER BLOCK
S/N LBM1-100
PROVIDES BLOCK COVER GP WITH REAR STUD AND SIDE COVER BREATHER
CANNOT BE USED WITH @@@@@188-7121@@@@@
AN ATTACHMENT

222-5947 COVER GP-CYLINDER BLOCK

222-5947 COVER GP-CYLINDER BLOCK
S/N LBM102-UP
PROVIDES BLOCK COVER GP WITH REAR STUD AND SIDE COVER BREATHER
CANNOT BE USED WITH @@@@@188-7121@@@@@
ALSO AN ATTACHMENT

229-8841 COVER GP-CYLINDER BLOCK

229-8841 COVER GP-CYLINDER BLOCK
FOR USE WITH SIDE COVER BREATHER
AN ATTACHMENT

221-4482 CYLINDER BLOCK GP

221-4482 CYLINDER BLOCK GP

263-3774 CYLINDER BLOCK GP

263-3774 CYLINDER BLOCK GP
PART OF 305-8141 CYLINDER BLOCK GP

305-8141 CYLINDER BLOCK GP

305-8141 CYLINDER BLOCK GP
PART OF 221-4482 CYLINDER BLOCK GP

227-5925 MANIFOLD GP-CYLINDER BLOCK

227-5925 MANIFOLD GP-CYLINDER BLOCK
FOR USE WITH @@@@@222-5947@@@@@
AN ATTACHMENT

135-2141 PLUG GP-CYLINDER BLOCK

135-2141 PLUG GP-CYLINDER BLOCK
PROVIDES PLUGS WHEN GAUGE IS NOT REQUIRED
AN ATTACHMENT

159-0303 PLUG GP-CYLINDER BLOCK

159-0303 PLUG GP-CYLINDER BLOCK
S/N LBM102-UP
REQUIRED WHEN REMOTE MOUNT COOLANT CONDITIONER IS NOT USED
ALSO AN ATTACHMENT

187-3322 PLUG GP-CYLINDER BLOCK

187-3322 PLUG GP-CYLINDER BLOCK
REQUIRED WHEN NO AIR COMPRESSOR IS USED
AN ATTACHMENT

162-8068 PLUG GP-ENGINE

162-8068 PLUG GP-ENGINE -OIL GALLERY

218-0357 PLUG GP-ENGINE

218-0357 PLUG GP-ENGINE
PROVIDES PLUGS WHEN NO AIR COMPRESSOR IS USED
AN ATTACHMENT

227-3819 PLUG GP-ENGINE

227-3819 PLUG GP-ENGINE
FOR USE WITH @@@@@222-5925@@@@@, @@@@@226-8695@@@@@, @@@@@229-8848@@@@@
CANNOT BE USED WITH @@@@@227-3818@@@@@
AN ATTACHMENT

233-0663 PLUG GP-ENGINE

233-0663 PLUG GP-ENGINE
FOR USE WITH ENGINES WITH NO AIR COMPRESSOR
AN ATTACHMENT

268-6561 PLUG GP-ENGINE

268-6561 PLUG GP-ENGINE
PROVIDES A PLUG RECEPTACLE AS. TO PLUG OPTIONAL PORTS FOR OIL PRESSURE SENSOR ON ENGINE AND ENGINE WIRING HARNESS
FOR USE WITH @@@@@222-5925@@@@@, @@@@@226-8695@@@@@, @@@@@227-5936@@@@@, @@@@@229-8848@@@@@, AMPSEAL SENSORS
CANNOT BE USED WITH @@@@@227-3818@@@@@
AN ATTACHMENT

CYLINDER HEAD GP

314-4184 CYLINDER HEAD AS

314-4184 CYLINDER HEAD AS
PART OF 300-9550 CYLINDER HEAD GP

487-2810 CYLINDER HEAD AS

487-2810 CYLINDER HEAD AS
PART OF 487-2807 CYLINDER HEAD GP

219-5847 CYLINDER HEAD GP

219-5847 CYLINDER HEAD GP
PART OF 219-5849 CYLINDER HEAD GP
Type 1

219-5847 CYLINDER HEAD GP

219-5847 CYLINDER HEAD GP
PART OF 219-5849 CYLINDER HEAD GP
Type 2

219-5847 CYLINDER HEAD GP

219-5847 CYLINDER HEAD GP
PART OF 219-5849 CYLINDER HEAD GP
Type 3

219-5847 CYLINDER HEAD GP

219-5847 CYLINDER HEAD GP
PART OF 219-5849 CYLINDER HEAD GP
Type 4

219-5849 CYLINDER HEAD GP

219-5849 CYLINDER HEAD GP

300-9550 CYLINDER HEAD GP

300-9550 CYLINDER HEAD GP
PART OF 219-5847 CYLINDER HEAD GP

487-2807 CYLINDER HEAD GP

487-2807 CYLINDER HEAD GP
PART OF 219-5847 CYLINDER HEAD GP

162-8068 PLUG GP-ENGINE

162-8068 PLUG GP-ENGINE -OIL GALLERY

218-0357 PLUG GP-ENGINE

218-0357 PLUG GP-ENGINE
PROVIDES PLUGS WHEN NO AIR COMPRESSOR IS USED
AN ATTACHMENT

227-3819 PLUG GP-ENGINE

227-3819 PLUG GP-ENGINE
FOR USE WITH @@@@@222-5925@@@@@, @@@@@226-8695@@@@@, @@@@@229-8848@@@@@
CANNOT BE USED WITH @@@@@227-3818@@@@@
AN ATTACHMENT

233-0663 PLUG GP-ENGINE

233-0663 PLUG GP-ENGINE
FOR USE WITH ENGINES WITH NO AIR COMPRESSOR
AN ATTACHMENT

268-6561 PLUG GP-ENGINE

DAMPER GP

111-7245 DAMPER & PULLEY GP

111-7245 DAMPER & PULLEY GP
FOR USE WITH @@@@@110-4390@@@@@, @@@@@156-0231@@@@@, SHORT FRONT END, 250 HP MAX
CANNOT BE USED WITH FRONT PTO
AN ATTACHMENT

148-7229 DAMPER & PULLEY GP

148-7229 DAMPER & PULLEY GP
305MM DIAMETER VISCOUS DAMPER. PROVIDES 1:42 DRIVE RATIO WHEN USED WITH 141.5MM DIA. FAN PULLEY
FOR USE WITH @@@@@122-8931@@@@@
AN ATTACHMENT

158-4643 DAMPER & PULLEY GP

158-4643 DAMPER & PULLEY GP
1.39:1 DRIVE RATIO
FOR USE WITH @@@@@187-3309@@@@@, @@@@@122-8931@@@@@, CUSTOMER SUPPLIED K-SECTION BELT
AN ATTACHMENT

165-6933 DAMPER & PULLEY GP

165-6933 DAMPER & PULLEY GP
PROVIDES VISCOUS DAMPER WITH VEE BELT PULLEY FOR 2 BELTS
FOR USE WITH @@@@@118-2090@@@@@
AN ATTACHMENT

183-4498 DAMPER & PULLEY GP

183-4498 DAMPER & PULLEY GP
8 GROOVE, 198MM DIA.
FOR USE WITH @@@@@178-2631@@@@@, SHORT FRONT END
AN ATTACHMENT

273-9766 DAMPER & PULLEY GP

273-9766 DAMPER & PULLEY GP
PROVIDES 13-INCH VISCOUS DAMPER AND CRANK PULLEY WITH DUAL 5/VEE GROOVE
AN ATTACHMENT

165-6932 DAMPER GP

165-6932 DAMPER GP
FOR USE WITH @@@@@118-2090@@@@@
CANNOT BE USED WITH @@@@@ 7E-1717@@@@@, 275 HP AND ABOVE
AN ATTACHMENT

165-6934 DAMPER GP

165-6934 DAMPER GP
DOES NOT INCLUDE MOUNTING HARDWARE
FOR USE WITH @@@@@118-2090@@@@@, @@@@@130-7653@@@@@, @@@@@131-3258@@@@@, @@@@@148-7232@@@@@
AN ATTACHMENT

241-4101 DAMPER GP

241-4101 DAMPER GP
PROVIDES A VISCOUS DAMPER, REQUIRED ON 275 BHP AND ABOVE
FOR USE WITH @@@@@119-0066@@@@@, @@@@@118-2090@@@@@
AN ATTACHMENT

4P-4453 DAMPER GP

4P-4453 DAMPER GP
S/N LBM102-UP
342.10MM DIAMETER SOLID DAMPER
FOR USE WITH @@@@@119-0066@@@@@, ENGINES WITH RATINGS OF 175 HP THRU 250 HP ONLY
ALSO AN ATTACHMENT

DRIVE GP-ACCESSORY

7E-8692 DRIVE GP-ACCESSORY

7E-8692 DRIVE GP-ACCESSORY
FOR USE WITH SAE "A" HYDRAULIC PUMP
CANNOT BE USED WITH AIR COMPRESSOR
AN ATTACHMENT

DRIVE GP-AUXILIARY

130-7653 ADAPTER GP-AUXILIARY DRIVE

130-7653 ADAPTER GP-AUXILIARY DRIVE
360 LB/FT OF TORQUE. REQUIRES VISCOUS DAMPER AND PULLEY GP
FOR USE WITH @@@@@165-6934@@@@@, CUSTOMER SUPPLIED SPICER 1260 AND 1310
AN ATTACHMENT

131-3258 ADAPTER GP-AUXILIARY DRIVE

131-3258 ADAPTER GP-AUXILIARY DRIVE
360 FT/LB OF TORQUE. FRONT POWER TAKE OFF, REQUIRES VISCOUS DAMPER AND PULLEY GP
FOR USE WITH @@@@@165-6934@@@@@, CUSTOMER SUPPLIED COUPLING
AN ATTACHMENT

148-7232 ADAPTER GP-AUXILIARY DRIVE

148-7232 ADAPTER GP-AUXILIARY DRIVE
PROVIDES ADAPTER TO BE USED WITH CUSTOMER SUPPLIED SPICER 1350/1410 SERIES YOKE (MAX 250LB/FT OF TORQUE)
FOR USE WITH VISCOUS DAMPER
AN ATTACHMENT

DRIVE GP-FAN

218-0360 DRIVE GP-FAN

218-0360 DRIVE GP-FAN
S/N LBM102-UP
420 MM FAN HEIGHT
FOR USE WITH @@@@@213-1640@@@@@, SHORT FRONT END WATER PUMPS, CUSTOMER SUPPLIED PULLEY
ALSO AN ATTACHMENT

142-7107 MOUNTING GP-FAN DRIVE

142-7107 MOUNTING GP-FAN DRIVE
PROVIDES STANDARD MOUNT FAN ADJUSTMENT BRACKET ONLY. REQUIRES PULLEY OR CUSTOMER SUPPLIED FAN DRIVE
FOR USE WITH @@@@@143-7018@@@@@, @@@@@120-6661@@@@@, @@@@@142-8575@@@@@, @@@@@153-9719@@@@@, @@@@@142-8100@@@@@, @@@@@120-6656@@@@@, @@@@@143-4927@@@@@, @@@@@143-7019@@@@@, @@@@@143-7021@@@@@, @@@@@143-7020@@@@@
AN ATTACHMENT

152-5013 MOUNTING GP-FAN DRIVE

152-5013 MOUNTING GP-FAN DRIVE
FOR USE WITH @@@@@153-5417@@@@@, @@@@@152-5016@@@@@, @@@@@156-0231@@@@@
AN ATTACHMENT

190-3961 MOUNTING GP-FAN DRIVE

190-3961 MOUNTING GP-FAN DRIVE
GM
AN ATTACHMENT

211-7845 MOUNTING GP-FAN DRIVE

211-7845 MOUNTING GP-FAN DRIVE
FOR USE WITH @@@@@197-9564@@@@@, @@@@@200-1212@@@@@, @@@@@200-1208@@@@@, @@@@@200-1209@@@@@, @@@@@200-2299@@@@@, FAN HEIGHTS FROM 11.125 TO 20.63 INCHES WITH UP TO 1.25:1 FAN RATIO
AN ATTACHMENT

269-4638 MOUNTING GP-FAN DRIVE

269-4638 MOUNTING GP-FAN DRIVE
PROVIDES 2-PIECE MTG OF FAN DRIVE (HEIGHTS OF 282.6-MM TO 489-MM)
FOR USE WITH @@@@@142-8100@@@@@, @@@@@180-9492@@@@@, @@@@@200-1208@@@@@, @@@@@200-1209@@@@@, @@@@@200-2299@@@@@, @@@@@200-1212@@@@@, @@@@@197-9564@@@@@, @@@@@206-2044@@@@@, @@@@@200-2269@@@@@
AN ATTACHMENT

142-8575 PULLEY GP-FAN & ALT DRIVE

142-8575 PULLEY GP-FAN & ALT DRIVE
1.15:1 DRIVE RATIO
FOR USE WITH @@@@@142-7107@@@@@, 50.8 MM (2 IN) PILOT AND 6 M8X1.25 HOLES ON 3.5 INCH BOLT CIRCLE
AN ATTACHMENT

143-7020 PULLEY GP-FAN & ALT DRIVE

143-7020 PULLEY GP-FAN & ALT DRIVE
1.15:1 DRIVE RATIO, MULTI POSITION
FOR USE WITH @@@@@142-7107@@@@@, 8 GROOVE FAN AND FAN CLUTCH AND MOUNTING
AN ATTACHMENT

DRIVE GP-PUMP

120-6657 DRIVE GP-WATER PUMP

120-6657 DRIVE GP-WATER PUMP
1.33:1 DRIVE RATIO
AN ATTACHMENT

179-9368 DRIVE GP-WATER PUMP

179-9368 DRIVE GP-WATER PUMP
FOR USE WITH VISCONIC DAMPER
AN ATTACHMENT

FLYWHEEL GP

100-4029 ADAPTER GP-ENGINE TO XMSN

100-4029 ADAPTER GP-ENGINE TO XMSN
FOR USE WITH SAE NO. 2
AN ATTACHMENT

107-2781 ADAPTER GP-ENGINE TO XMSN

107-2781 ADAPTER GP-ENGINE TO XMSN
FOR USE WITH SAE NO. 1 FLYWHEEL HOUSING
AN ATTACHMENT

108-4923 ADAPTER GP-ENGINE TO XMSN

108-4923 ADAPTER GP-ENGINE TO XMSN
FOR USE WITH SPACERLESS TRANSMISSIONS
AN ATTACHMENT

117-0508 ADAPTER GP-ENGINE TO XMSN

117-0508 ADAPTER GP-ENGINE TO XMSN
FOR USE WITH @@@@@145-9974@@@@@, @@@@@151-0163@@@@@, SPACERLESS MANUAL TRANSMISSION, AUTOMATIC TRANSMISSION WITH ADAPTER
AN ATTACHMENT

117-3440 ADAPTER GP-ENGINE TO XMSN

117-3440 ADAPTER GP-ENGINE TO XMSN
FLEX PLATE AND HUB
FOR USE WITH @@@@@108-4923@@@@@, SPACERLESS TRANSMISSION
AN ATTACHMENT

133-5003 ADAPTER GP-ENGINE TO XMSN

133-5003 ADAPTER GP-ENGINE TO XMSN
FOR USE WITH @@@@@129-1175@@@@@, SAE # 3 VERTICAL MOUNTING PADS WITH L.H. STARTER
AN ATTACHMENT

145-9974 ADAPTER GP-ENGINE TO XMSN

145-9974 ADAPTER GP-ENGINE TO XMSN
ADAPTS SAE NO. 3 FLANGE TO SAE NO. 2 FLYWHEEL HOUSING
FOR USE WITH @@@@@117-0508@@@@@
AN ATTACHMENT

151-0163 ADAPTER GP-ENGINE TO XMSN

151-0163 ADAPTER GP-ENGINE TO XMSN
PROVIDES ADAPTER RING FOR TORQUE CONVERTERS TO ENGINE MOUNTED FLEX PLATE
FOR USE WITH @@@@@117-0508@@@@@, @@@@@133-5003@@@@@, @@@@@161-0200@@@@@
AN ATTACHMENT

161-9214 ADAPTER GP-ENGINE TO XMSN

161-9214 ADAPTER GP-ENGINE TO XMSN
FOR USE WITH SAE NO. 2 FLYWHEEL HOUSING WITH L.H. STARTER
AN ATTACHMENT

165-4059 ADAPTER GP-ENGINE TO XMSN

165-4059 ADAPTER GP-ENGINE TO XMSN
PROVIDES ADAPTER FOR SAE NO. 2 FLYWHEEL
FOR USE WITH @@@@@161-9214@@@@@
AN ATTACHMENT

263-4019 ADAPTER GP-ENGINE TO XMSN

263-4019 ADAPTER GP-ENGINE TO XMSN
FOR USE WITH SAE NO.2 FLYWHEEL HOUSING
AN ATTACHMENT

263-4021 ADAPTER GP-ENGINE TO XMSN

263-4021 ADAPTER GP-ENGINE TO XMSN
FOR USE WITH SAE NO. 12 FLYWHEEL HOUSING WITH LEFT HAND STARTER
AN ATTACHMENT

122-8933 FLYWHEEL GP

122-8933 FLYWHEEL GP
FOR USE WITH SAE NO. 2 FLYWHEEL HOUSING
CANNOT BE USED WITH @@@@@188-7121@@@@@
AN ATTACHMENT

188-7119 FLYWHEEL GP

188-7119 FLYWHEEL GP
INCLUDES 358.7MM DIA BOLT CIRCLE AND 393.7MM DIA BOLT CIRCLE FOR CLUTCH. PROVIDES 14 INCH FLYWHEEL FOR RPTO (SAE NO.2)
FOR USE WITH @@@@@188-7121@@@@@
AN ATTACHMENT

207-8050 FLYWHEEL GP

207-8050 FLYWHEEL GP
14 INCH POT TYPE
FOR USE WITH SAE NO. 2 RPTO
AN ATTACHMENT

273-2720 FLYWHEEL GP

273-2720 FLYWHEEL GP
S/N LBM102-UP
SAE NO.2
ALSO AN ATTACHMENT

274-1903 FLYWHEEL GP

274-1903 FLYWHEEL GP
SAE NO. 2
AN ATTACHMENT

274-1904 FLYWHEEL GP

274-1904 FLYWHEEL GP
SAE NO. 2
AN ATTACHMENT

274-1907 FLYWHEEL GP

274-1907 FLYWHEEL GP
PROVIDES 17-INCH FLYWHEEL
FOR USE WITH SINGLE PLATE CLUTCH, REQUIRES SAE NO.1 HOUSING
AN ATTACHMENT

188-7121 GEAR GP-REAR

188-7121 GEAR GP-REAR
OUTPUT RATIO 1:1.3. PROVIDES RPTO GEAR TRAIN, SAE NO. 2 FLYWHEEL HOUSING, AND REAR CRANKSEAL.
FOR USE WITH @@@@@188-7119@@@@@, @@@@@207-8050@@@@@, @@@@@117-2747@@@@@
CANNOT BE USED WITH @@@@@122-8933@@@@@
AN ATTACHMENT

GEAR GP

205-1321 GEAR GP-FRONT

205-1321 GEAR GP-FRONT

188-7121 GEAR GP-REAR

165-4446 HOUSING GP-FRONT

165-4446 HOUSING GP-FRONT

153-9719 IDLER GP

153-9719 IDLER GP
PROVIDES 8 GROOVE POLY VEE PULLEY
FOR USE WITH @@@@@142-7107@@@@@, REMOTE MOUNTED FAN
CANNOT BE USED WITH FAN PULLEY
AN ATTACHMENT

HOUSING GP-FLYWHEEL

100-4029 ADAPTER GP-ENGINE TO XMSN

100-4029 ADAPTER GP-ENGINE TO XMSN
FOR USE WITH SAE NO. 2
AN ATTACHMENT

107-2781 ADAPTER GP-ENGINE TO XMSN

107-2781 ADAPTER GP-ENGINE TO XMSN
FOR USE WITH SAE NO. 1 FLYWHEEL HOUSING
AN ATTACHMENT

108-4923 ADAPTER GP-ENGINE TO XMSN

108-4923 ADAPTER GP-ENGINE TO XMSN
FOR USE WITH SPACERLESS TRANSMISSIONS
AN ATTACHMENT

117-0508 ADAPTER GP-ENGINE TO XMSN

117-0508 ADAPTER GP-ENGINE TO XMSN
FOR USE WITH @@@@@145-9974@@@@@, @@@@@151-0163@@@@@, SPACERLESS MANUAL TRANSMISSION, AUTOMATIC TRANSMISSION WITH ADAPTER
AN ATTACHMENT

117-3440 ADAPTER GP-ENGINE TO XMSN

117-3440 ADAPTER GP-ENGINE TO XMSN
FLEX PLATE AND HUB
FOR USE WITH @@@@@108-4923@@@@@, SPACERLESS TRANSMISSION
AN ATTACHMENT

133-5003 ADAPTER GP-ENGINE TO XMSN

133-5003 ADAPTER GP-ENGINE TO XMSN
FOR USE WITH @@@@@129-1175@@@@@, SAE # 3 VERTICAL MOUNTING PADS WITH L.H. STARTER
AN ATTACHMENT

145-9974 ADAPTER GP-ENGINE TO XMSN

145-9974 ADAPTER GP-ENGINE TO XMSN
ADAPTS SAE NO. 3 FLANGE TO SAE NO. 2 FLYWHEEL HOUSING
FOR USE WITH @@@@@117-0508@@@@@
AN ATTACHMENT

151-0163 ADAPTER GP-ENGINE TO XMSN

151-0163 ADAPTER GP-ENGINE TO XMSN
PROVIDES ADAPTER RING FOR TORQUE CONVERTERS TO ENGINE MOUNTED FLEX PLATE
FOR USE WITH @@@@@117-0508@@@@@, @@@@@133-5003@@@@@, @@@@@161-0200@@@@@
AN ATTACHMENT

161-9214 ADAPTER GP-ENGINE TO XMSN

161-9214 ADAPTER GP-ENGINE TO XMSN
FOR USE WITH SAE NO. 2 FLYWHEEL HOUSING WITH L.H. STARTER
AN ATTACHMENT

165-4059 ADAPTER GP-ENGINE TO XMSN

165-4059 ADAPTER GP-ENGINE TO XMSN
PROVIDES ADAPTER FOR SAE NO. 2 FLYWHEEL
FOR USE WITH @@@@@161-9214@@@@@
AN ATTACHMENT

263-4019 ADAPTER GP-ENGINE TO XMSN

263-4019 ADAPTER GP-ENGINE TO XMSN
FOR USE WITH SAE NO.2 FLYWHEEL HOUSING
AN ATTACHMENT

263-4021 ADAPTER GP-ENGINE TO XMSN

263-4021 ADAPTER GP-ENGINE TO XMSN
FOR USE WITH SAE NO. 12 FLYWHEEL HOUSING WITH LEFT HAND STARTER
AN ATTACHMENT

117-2747 FLANGE GP-OUTPUT SHAFT

117-2747 FLANGE GP-OUTPUT SHAFT
FOR USE WITH CUSTOMER SUPPLIED PTO FLANGE
AN ATTACHMENT

117-0515 HOUSING GP-FLYWHEEL

117-0515 HOUSING GP-FLYWHEEL
PROVIDES 7 DEGREE PAD SAE NO. 2 HOUSING
AN ATTACHMENT

122-8934 HOUSING GP-FLYWHEEL

122-8934 HOUSING GP-FLYWHEEL
PROVIDES VERTICAL PAD SAE NO. 2 HOUSING
FOR USE WITH @@@@@175-7332@@@@@, @@@@@ 6I-4991@@@@@
AN ATTACHMENT

129-1175 HOUSING GP-FLYWHEEL

129-1175 HOUSING GP-FLYWHEEL
PROVIDES VERTICAL PAD SAE NO. 3 HOUSING
FOR USE WITH @@@@@143-7341@@@@@, LH STARTING MOTOR
AN ATTACHMENT

237-9630 HOUSING GP-FLYWHEEL

237-9630 HOUSING GP-FLYWHEEL
FOR USE WITH @@@@@133-5003@@@@@, @@@@@175-7332@@@@@
CANNOT BE USED WITH @@@@@145-9974@@@@@
AN ATTACHMENT

285-2392 HOUSING GP-FLYWHEEL

285-2392 HOUSING GP-FLYWHEEL
S/N LBM102-UP
PROVIDES FLYWHEEL HOUSING GP WITH A FLEX PLATE ACCESS HOLE THAT CONTAINS AN OEM SPECIFIC PLUG
ALSO AN ATTACHMENT

HOUSING GP-FRONT

118-1727 COVER GP-FRONT HOUSING

118-1727 COVER GP-FRONT HOUSING -ACCESSORY DRIVE
REQUIRED ON ENGINES WITHOUT FACTORY INSTALLED AIR COMPRESSOR
FOR USE WITH @@@@@160-7075@@@@@
AN ATTACHMENT

172-8732 COVER GP-FRONT HOUSING

172-8732 COVER GP-FRONT HOUSING
FOR USE WITH RH SERVICED ENGINES
CANNOT BE USED WITH @@@@@172-8733@@@@@
AN ATTACHMENT

211-9120 COVER GP-FRONT HOUSING

211-9120 COVER GP-FRONT HOUSING
FOR USE WITH OIL FILLER

213-1630 FASTENER GP-FRONT COVER

213-1630 FASTENER GP-FRONT COVER
NO STUDS
FOR USE WITH SHORT FRONT END
AN ATTACHMENT

213-1631 FASTENER GP-FRONT COVER

213-1631 FASTENER GP-FRONT COVER
S/N LBM102-UP
2 STUDS
FOR USE WITH NON-GM APPLICATIONS
ALSO AN ATTACHMENT

235-3988 FASTENER GP-FRONT COVER

235-3988 FASTENER GP-FRONT COVER
AN ATTACHMENT

239-9353 FASTENER GP-FRONT COVER

239-9353 FASTENER GP-FRONT COVER
FOR USE WITH @@@@@228-9654@@@@@, @@@@@239-5919@@@@@, NON-GM APPLICATIONS
AN ATTACHMENT

116-4556 FASTENER GP-FRONT HOUSING

116-4556 FASTENER GP-FRONT HOUSING
S/N LBM102-UP
CANNOT BE USED WITH FRONT ENGINE SUPPORT
ALSO AN ATTACHMENT

205-1321 GEAR GP-FRONT

205-1321 GEAR GP-FRONT

165-4446 HOUSING GP-FRONT

165-4446 HOUSING GP-FRONT

LIFTING GP-ENGINE

113-6170 FASTENER GP-LIFTING

113-6170 FASTENER GP-LIFTING -ENGINE, REAR
FOR USE WITH @@@@@142-8100@@@@@
CANNOT BE USED WITH @@@@@228-8927@@@@@, REMOTE FUEL FILTER
AN ATTACHMENT

117-3477 FASTENER GP-LIFTING

117-3477 FASTENER GP-LIFTING -ENGINE, FRONT
FOR USE WITH @@@@@142-8100@@@@@, @@@@@180-9492@@@@@
CANNOT BE USED WITH FAN DRIVE
AN ATTACHMENT

142-8100 LIFTING GP-ENGINE

142-8100 LIFTING GP-ENGINE
FRONT, REAR
FOR USE WITH @@@@@113-6170@@@@@, @@@@@142-7107@@@@@, @@@@@211-7845@@@@@, @@@@@117-3477@@@@@
AN ATTACHMENT

153-5417 LIFTING GP-ENGINE

153-5417 LIFTING GP-ENGINE
REAR
FOR USE WITH @@@@@113-6170@@@@@, @@@@@152-5013@@@@@, REMOTE FUEL FILTER
AN ATTACHMENT

180-9492 LIFTING GP-ENGINE

180-9492 LIFTING GP-ENGINE
S/N LBM102-UP
PROVIDES FRONT AND REAR LIFTING EYES
FOR USE WITH @@@@@117-3477@@@@@, FAN MOUNTING
ALSO AN ATTACHMENT

228-8927 LIFTING GP-ENGINE

228-8927 LIFTING GP-ENGINE
PROVIDES FRONT AND REAR LIFTING EYES WITH MOUNTING HOLE FOR AIR COMPRESSOR WATER LINE.
FOR USE WITH @@@@@142-7107@@@@@, @@@@@211-7845@@@@@, @@@@@117-3477@@@@@, @@@@@233-3661@@@@@, @@@@@233-5202@@@@@, @@@@@236-5284@@@@@, @@@@@236-6998@@@@@, @@@@@233-9817@@@@@
AN ATTACHMENT

MOUNTING GP-ALTERNATOR

120-6655 MOUNTING GP-ALTERNATOR

120-6655 MOUNTING GP-ALTERNATOR
PROVIDES A NON-ADJUSTABLE BRACKET AND PULLEY
FOR USE WITH @@@@@142-7107@@@@@, 8 GROOVE CRANK PULLEY, LARGE ALTERNATORS
AN ATTACHMENT

125-3721 MOUNTING GP-ALTERNATOR

125-3721 MOUNTING GP-ALTERNATOR
PROVIDES NON-ADJUSTABLE ALTERNATOR BRACKET AND NO ALTERNATOR PULLEY
FOR USE WITH ADJUSTABLE FAN BRACKET AND 8 GROOVE CRANK PULLEY
AN ATTACHMENT

213-4387 MOUNTING GP-ALTERNATOR

213-4387 MOUNTING GP-ALTERNATOR
FOR USE WITH @@@@@143-7018@@@@@
AN ATTACHMENT

MOUNTING GP-ENGINE

219-7475 SUPPORT AS-FRONT

219-7475 SUPPORT AS-FRONT
FOR USE WITH HIGH MOUNT ECM
AN ATTACHMENT

110-4390 SUPPORT GP-ENGINE

110-4390 SUPPORT GP-ENGINE
FOR USE WITH @@@@@129-1173@@@@@, @@@@@111-7245@@@@@
AN ATTACHMENT

131-2202 SUPPORT GP-ENGINE

131-2202 SUPPORT GP-ENGINE -FRONT
NARROW
FOR USE WITH @@@@@206-2044@@@@@, @@@@@200-2269@@@@@
AN ATTACHMENT

187-3309 SUPPORT GP-ENGINE

187-3309 SUPPORT GP-ENGINE
FOR USE WITH @@@@@158-4643@@@@@, VISCOUS DAMPER
AN ATTACHMENT

187-3349 SUPPORT GP-ENGINE

187-3349 SUPPORT GP-ENGINE
FOR USE WITH @@@@@206-2044@@@@@, @@@@@200-2269@@@@@, ENGINES WITH 4 DEG REAR DOWN INSTALLATION
AN ATTACHMENT

190-3959 SUPPORT GP-ENGINE

190-3959 SUPPORT GP-ENGINE
S/N LBM102-UP
LH
FOR USE WITH @@@@@116-4556@@@@@
ALSO AN ATTACHMENT

197-9648 SUPPORT GP-ENGINE

197-9648 SUPPORT GP-ENGINE
FRONT
AN ATTACHMENT

207-8089 SUPPORT GP-ENGINE

207-8089 SUPPORT GP-ENGINE -FRONT
AN ATTACHMENT

7E-1717 SUPPORT GP-ENGINE

7E-1717 SUPPORT GP-ENGINE
FOR USE WITH MOBILE ENGINES WHICH REQUIRE SINGLE POINT FRONT MOUNTING
CANNOT BE USED WITH @@@@@165-6932@@@@@, INSTALLED RADIATOR, RUBBER DAMPER
AN ATTACHMENT

9Y-7256 SUPPORT GP-ENGINE

9Y-7256 SUPPORT GP-ENGINE
PROVIDES FRONT SUPPORT, SIDE OF BLOCK MOUNTED
FOR USE WITH GMT 530 B-MODEL BUS & C-MODEL TRUCKS REQUIRING FRONT ENGINE SUPPORTS
AN ATTACHMENT

PAN GP-OIL

7C-4566 DRAIN GP-ENGINE OIL

7C-4566 DRAIN GP-ENGINE OIL
FOR USE WITH @@@@@126-5931@@@@@, ALUMINUM OIL PANS THAT REQUIRE AN ADDITIONAL LONG PLUG, 28-LITER OIL PANS, C9 ACERT WET PETROLEUM ENGINE WHEN USING AN AIR COMPRESSOR OPTION
AN ATTACHMENT

122-8936 PAN GP-OIL

122-8936 PAN GP-OIL -ENGINE
21 LITER. FRONT SUMP
AN ATTACHMENT

126-5931 PAN GP-OIL

126-5931 PAN GP-OIL -ENGINE
S/N LBM1-101
31 LITER. FRONT SUMP
FOR USE WITH @@@@@ 7C-2475@@@@@, @@@@@ 7C-4566@@@@@
AN ATTACHMENT

126-5931 PAN GP-OIL

126-5931 PAN GP-OIL -ENGINE
S/N LBM102-UP
31 LITER. FRONT SUMP
FOR USE WITH @@@@@ 7C-2475@@@@@, @@@@@ 7C-4566@@@@@
AN ATTACHMENT

164-0216 PAN GP-OIL

164-0216 PAN GP-OIL -ENGINE
28 LITER. REAR SUMP
FOR USE WITH @@@@@129-1133@@@@@
AN ATTACHMENT

175-3231 PAN GP-OIL

175-3231 PAN GP-OIL -ENGINE
S/N LBM1-100
28 LITER. FRONT SUMP
FOR USE WITH @@@@@ 7C-2475@@@@@
AN ATTACHMENT

175-3231 PAN GP-OIL

175-3231 PAN GP-OIL -ENGINE
S/N LBM101-UP
28 LITER. FRONT SUMP
FOR USE WITH @@@@@ 7C-2475@@@@@
AN ATTACHMENT

175-3232 PAN GP-OIL

175-3232 PAN GP-OIL -ENGINE
FRONT SUMP
PART OF 175-3231 PAN GP-OIL
AN ATTACHMENT

175-3233 PAN GP-OIL

175-3233 PAN GP-OIL -ENGINE
REAR SUMP
PART OF 164-0216 PAN GP-OIL
AN ATTACHMENT

183-6851 PAN GP-OIL

183-6851 PAN GP-OIL -ENGINE
REAR SUMP
PART OF 183-6852 PAN GP-OIL
AN ATTACHMENT

183-6852 PAN GP-OIL

183-6852 PAN GP-OIL -ENGINE
28 LITER, REAR SUMP
FOR USE WITH @@@@@129-1133@@@@@, OIL LEVEL SENSOR GP
AN ATTACHMENT

229-8855 PAN GP-OIL

229-8855 PAN GP-OIL -ENGINE
AN ATTACHMENT

258-8332 PAN GP-OIL

258-8332 PAN GP-OIL -ENGINE
27 LITER, FRONT SUMP
AN ATTACHMENT

287-3291 PAN GP-OIL

287-3291 PAN GP-OIL -ENGINE
S/N LBM1-99
28-LITER REAR SUMP
AN ATTACHMENT

287-3291 PAN GP-OIL

287-3291 PAN GP-OIL -ENGINE
S/N LBM100-100
28-LITER REAR SUMP
AN ATTACHMENT

287-3291 PAN GP-OIL

287-3291 PAN GP-OIL -ENGINE
S/N LBM101-UP
28-LITER REAR SUMP
AN ATTACHMENT

287-3291 PAN GP-OIL

287-3291 PAN GP-OIL -ENGINE
S/N LBM102-UP
28-LITER REAR SUMP
ALSO AN ATTACHMENT

7E-2313 PLUG GP-OIL PAN

7E-2313 PLUG GP-OIL PAN
FOR USE WITH STAMPED STEEL OIL PAN, 21 LITER OIL PAN
AN ATTACHMENT

PISTON & ROD GP

210-5592 PISTON & ROD GP

210-5592 PISTON & ROD GP
16.5:1 RATIO

212-3652 PISTON & ROD GP

212-3652 PISTON & ROD GP
16.5:1 RATIO

POWER TAKE-OFF GP

117-2747 FLANGE GP-OUTPUT SHAFT

117-2747 FLANGE GP-OUTPUT SHAFT
FOR USE WITH CUSTOMER SUPPLIED PTO FLANGE
AN ATTACHMENT

PULLEY GP

111-7245 DAMPER & PULLEY GP

111-7245 DAMPER & PULLEY GP
FOR USE WITH @@@@@110-4390@@@@@, @@@@@156-0231@@@@@, SHORT FRONT END, 250 HP MAX
CANNOT BE USED WITH FRONT PTO
AN ATTACHMENT

148-7229 DAMPER & PULLEY GP

148-7229 DAMPER & PULLEY GP
305MM DIAMETER VISCOUS DAMPER. PROVIDES 1:42 DRIVE RATIO WHEN USED WITH 141.5MM DIA. FAN PULLEY
FOR USE WITH @@@@@122-8931@@@@@
AN ATTACHMENT

158-4643 DAMPER & PULLEY GP

158-4643 DAMPER & PULLEY GP
1.39:1 DRIVE RATIO
FOR USE WITH @@@@@187-3309@@@@@, @@@@@122-8931@@@@@, CUSTOMER SUPPLIED K-SECTION BELT
AN ATTACHMENT

165-6933 DAMPER & PULLEY GP

165-6933 DAMPER & PULLEY GP
PROVIDES VISCOUS DAMPER WITH VEE BELT PULLEY FOR 2 BELTS
FOR USE WITH @@@@@118-2090@@@@@
AN ATTACHMENT

183-4498 DAMPER & PULLEY GP

183-4498 DAMPER & PULLEY GP
8 GROOVE, 198MM DIA.
FOR USE WITH @@@@@178-2631@@@@@, SHORT FRONT END
AN ATTACHMENT

273-9766 DAMPER & PULLEY GP

273-9766 DAMPER & PULLEY GP
PROVIDES 13-INCH VISCOUS DAMPER AND CRANK PULLEY WITH DUAL 5/VEE GROOVE
AN ATTACHMENT

120-6661 IDLER GP-BELT

120-6661 IDLER GP-BELT
FOR USE WITH @@@@@125-3721@@@@@, @@@@@142-7107@@@@@, @@@@@143-7018@@@@@, ENGINES EQUIPPED WITH ADJUSTABLE FAN BRACKET
AN ATTACHMENT

192-1563 IDLER GP-BELT

192-1563 IDLER GP-BELT -ALTERNATOR, REFRIGERANT COMPRESSOR
PART OF 273-7523 BELT TENSIONER GP, 273-7527 MOUNTING GP-ALTERNATOR & COMPR
AN ATTACHMENT

197-9646 IDLER GP-BELT

197-9646 IDLER GP-BELT
FOR USE WITH COMPRESSORS WITHOUT FREON AND LOW FAN CENTERS
AN ATTACHMENT

197-9651 IDLER GP-BELT

197-9651 IDLER GP-BELT
74MM FLAT IDLER FOR 8 GROOVE POLY RIB BELT
AN ATTACHMENT

219-7464 IDLER GP-BELT

219-7464 IDLER GP-BELT
FOR USE WITH @@@@@219-7444@@@@@, @@@@@219-7448@@@@@, SHORT FRONT END ACCESSORY DRIVE
CANNOT BE USED WITH CUSTOMER PROVIDED 8 GROOVE REFRIG COMPRESSOR
AN ATTACHMENT

152-5016 PULLEY GP

152-5016 PULLEY GP
1.15:1 FAN DRIVE, 2 IN PILOT & LH THREAD. 8-GROOVE POLY VEE. UPPER MOUNTING HEIGHTS MAY REQUIRE ADDITIONAL IDLER
FOR USE WITH @@@@@152-5013@@@@@
AN ATTACHMENT

155-3177 PULLEY GP

155-3177 PULLEY GP
FAN PULLEY 1.29:1 MULTI POSITION SAE 50.8MM (2IN) PILOT & M30X2 LEFT HAND THD
FOR USE WITH FAN & FAN CLUTCH WITH M30X2 LEFT HAND THD & 8 GROOVE POLY-RIB BELT
AN ATTACHMENT

200-1205 PULLEY GP

200-1205 PULLEY GP
141.5 DIA FAN PULLEY
FOR USE WITH CUSTOMER SUPPLIED 'K' SECTION 8-GROOVE POLY V-BELT
AN ATTACHMENT

239-2334 PULLEY GP

239-2334 PULLEY GP
141.5MM DIA.. PROVIDES MULTI-POSITIONAL FAN PULLEY WITH M30X2 LH THREADED SHAFT AND LONGER SHAFT LENGTH
FOR USE WITH @@@@@211-7845@@@@@, @@@@@213-1640@@@@@, CUSTOMER SUPPLIED FAN OR FAN ADAPTER, CUSTOMER SUPPLIED 8-GROOVE K-SECTION BELT
AN ATTACHMENT

123-0789 PULLEY GP-ALTERNATOR

123-0789 PULLEY GP-ALTERNATOR
3.34:1 DRIVE RATIO. 57 MM (2.24 IN) DIAMETER PULLEY
FOR USE WITH 190.5 MM (7.5 IN) DIAMETER CRANKSHAFT PULLEY, 22.19 MM (0.87 IN) DIAMETER ALTERNATOR SHAFT WITH OR WITHOUT KEY
AN ATTACHMENT

233-6136 PULLEY GP-ALTERNATOR

233-6136 PULLEY GP-ALTERNATOR
CANNOT BE USED WITH ENGINES WITH AIR CONDITIONER COMPRESSOR OR ALTERNATOR INSTALLATION
AN ATTACHMENT

276-1373 PULLEY GP-ALTERNATOR

276-1373 PULLEY GP-ALTERNATOR
8-RIB, 63.8-MM DIAMETER
AN ATTACHMENT

118-2090 PULLEY GP-CRANKSHAFT

118-2090 PULLEY GP-CRANKSHAFT
PROVIDES A PULLEY WITH 8 GROOVE POLY-V BELT
FOR USE WITH @@@@@165-6932@@@@@, @@@@@165-6933@@@@@, @@@@@165-6934@@@@@
CANNOT BE USED WITH SHORT FRONT END
AN ATTACHMENT

119-0066 PULLEY GP-CRANKSHAFT

119-0066 PULLEY GP-CRANKSHAFT
PROVIDES A 7 GROOVE POLY-V EXTENDED PULLEY
FOR USE WITH @@@@@ 4P-4453@@@@@
AN ATTACHMENT

122-8931 PULLEY GP-CRANKSHAFT

122-8931 PULLEY GP-CRANKSHAFT
FOR USE WITH @@@@@148-7229@@@@@, @@@@@158-4643@@@@@, 8 GROOVE POLY-V OR V-GROOVE ACCESSORY DRIVE PULLEY
CANNOT BE USED WITH SHORT FRONT END
AN ATTACHMENT

200-2269 PULLEY GP-CRANKSHAFT

200-2269 PULLEY GP-CRANKSHAFT
198 DIA SHORT FRONT CRANK PULLEY
FOR USE WITH POLY-VEE DRIVEN
AN ATTACHMENT

206-2044 PULLEY GP-CRANKSHAFT

206-2044 PULLEY GP-CRANKSHAFT
S/N LBM102-UP
182.5 DIA SHORT FRONT CRANK
FOR USE WITH @@@@@197-9564@@@@@, POLY-V DRIVEN WATER PUMPS, RUBBER AND VISCOUS DAMPERS
ALSO AN ATTACHMENT

200-1204 PULLEY GP-FAN

200-1204 PULLEY GP-FAN
MULTI POSITION 158.7 DIA. FAN PULLEY WITH M30X2 LEFT HAND THREADED SHAFT FOR CUSTOMER SUPPLIED FAN OR FAN ADAPTER
FOR USE WITH @@@@@213-1640@@@@@, @@@@@211-7845@@@@@, CUSTOMER SUPPLIED 8 GROOVE POLY VEE BELT
AN ATTACHMENT

236-7276 PULLEY GP-FAN

236-7276 PULLEY GP-FAN
1.15:1 RATIO
FOR USE WITH @@@@@219-7448@@@@@, FAN AND FAN CLUTCH WITH M30 X 2 LEFT HAND THREAD, AND CUSTOMER PROVIDED 8 GROOVE POLY-RIB BELT
AN ATTACHMENT

142-8575 PULLEY GP-FAN & ALT DRIVE

142-8575 PULLEY GP-FAN & ALT DRIVE
1.15:1 DRIVE RATIO
FOR USE WITH @@@@@142-7107@@@@@, 50.8 MM (2 IN) PILOT AND 6 M8X1.25 HOLES ON 3.5 INCH BOLT CIRCLE
AN ATTACHMENT

143-7020 PULLEY GP-FAN & ALT DRIVE

143-7020 PULLEY GP-FAN & ALT DRIVE
1.15:1 DRIVE RATIO, MULTI POSITION
FOR USE WITH @@@@@142-7107@@@@@, 8 GROOVE FAN AND FAN CLUTCH AND MOUNTING
AN ATTACHMENT

143-4927 PULLEY GP-FAN DRIVE

143-4927 PULLEY GP-FAN DRIVE
1.29:1 RATIO. PROVIDES A 8 GROOVE PULLEY WITH A SHORT SHAFT
FOR USE WITH @@@@@142-7107@@@@@
AN ATTACHMENT

143-7018 PULLEY GP-FAN DRIVE

143-7018 PULLEY GP-FAN DRIVE
1:1 DRIVE RATIO
FOR USE WITH @@@@@142-7107@@@@@, @@@@@120-6661@@@@@, 50.8 MM PILOT
AN ATTACHMENT

143-7019 PULLEY GP-FAN DRIVE

143-7019 PULLEY GP-FAN DRIVE
1:1 DRIVE RATIO
FOR USE WITH @@@@@142-7107@@@@@, FAN & FAN CLUTCH WITH M30 X 2 LEFT HAND THREAD, 8 GROOVE K SECTION POLY-RIB BELT, MOUNTING GP-FAN DRIVE
AN ATTACHMENT

143-7021 PULLEY GP-FAN DRIVE

143-7021 PULLEY GP-FAN DRIVE
1.29:1 DRIVE RATIO, MULTI POSITION
FOR USE WITH @@@@@142-7107@@@@@
AN ATTACHMENT

200-2280 PULLEY GP-FAN DRIVE

200-2280 PULLEY GP-FAN DRIVE
MULTI POSITION 158.7 DIAMETER FAN PULLEY FOR CUSTOMER SUPPLIED FAN OR FAN ADAPTER
FOR USE WITH @@@@@211-7845@@@@@, @@@@@213-1640@@@@@, CUSTOMER SUPPLIED K SECTION, 8 GROOVE POLY-V BELT
AN ATTACHMENT

175-3223 PULLEY GP-IDLER

175-3223 PULLEY GP-IDLER
PART OF 124-7786 BELT TENSIONER GP
CANNOT BE USED WITH CUSTOMER SUPPLIED REFRIGERANT COMPRESSOR
AN ATTACHMENT

236-6104 PULLEY GP-IDLER

236-6104 PULLEY GP-IDLER
73-MM DIAMETER GROOVED IDLER FOR 8 GROOVED POLY-V-BELT
FOR USE WITH @@@@@213-1640@@@@@, CUSTOMER OMITTED FAN DRIVE
AN ATTACHMENT

250-2345 PULLEY GP-IDLER

250-2345 PULLEY GP-IDLER
PROVIDES AN IDLER GP FOR A POLY-V DRIVE SYSTEM WITHOUT A/C COMPRESSOR
AN ATTACHMENT

253-9319 PULLEY GP-IDLER

253-9319 PULLEY GP-IDLER
USE WHEN NO FREON COMPRESSOR OR FAN IS USED
FOR USE WITH @@@@@152-5013@@@@@
AN ATTACHMENT

SHAFT GP-STUB

117-2747 FLANGE GP-OUTPUT SHAFT

117-2747 FLANGE GP-OUTPUT SHAFT
FOR USE WITH CUSTOMER SUPPLIED PTO FLANGE
AN ATTACHMENT

SERPENTINE/V-BELTS

253-9321 BELT GP-SERPENTINE

253-9321 BELT GP-SERPENTINE -FAN DRIVE
FOR USE WITH @@@@@152-5013@@@@@
AN ATTACHMENT

273-7538 BELT GP-SERPENTINE

273-7538 BELT GP-SERPENTINE
2690-MM, 8 RIB
FOR USE WITH ALTERNATOR AND A/C COMPRESSOR
AN ATTACHMENT

273-7540 BELT GP-SERPENTINE

273-7540 BELT GP-SERPENTINE
AN ATTACHMENT

275-9347 BELT GP-SERPENTINE

275-9347 BELT GP-SERPENTINE
AN ATTACHMENT

275-9348 BELT GP-SERPENTINE

275-9348 BELT GP-SERPENTINE
1645-MM 8-RIB
FOR USE WITH ALTERNATOR WITH OUT A/C COMPRESSOR
AN ATTACHMENT

249-8744 BELT-SERPENTINE

249-8744 BELT-SERPENTINE
PROVIDES A SHIP LOOSE BELT
FOR USE WITH @@@@@142-7107@@@@@
AN ATTACHMENT

VALVE MECHANISM GP

222-5920 COVER GP-VALVE MECHANISM

222-5920 COVER GP-VALVE MECHANISM
S/N LBM1-101
AN ATTACHMENT

222-5920 COVER GP-VALVE MECHANISM

222-5920 COVER GP-VALVE MECHANISM
S/N LBM102-UP
AN ATTACHMENT

222-5922 COVER GP-VALVE MECHANISM

222-5922 COVER GP-VALVE MECHANISM
S/N LBM1-101
AN ATTACHMENT

222-5922 COVER GP-VALVE MECHANISM

222-5922 COVER GP-VALVE MECHANISM
S/N LBM102-UP
AN ATTACHMENT

222-5952 COVER GP-VALVE MECHANISM

222-5952 COVER GP-VALVE MECHANISM
FOR USE WITH ENGINES THAT USE SIDE COVER BREATHER AND REQUIRE NO TOP OIL FILL
AN ATTACHMENT

222-5952 COVER GP-VALVE MECHANISM

222-5952 COVER GP-VALVE MECHANISM
S/N LBM102-UP
FOR USE WITH ENGINES THAT USE SIDE COVER BREATHER AND REQUIRE NO TOP OIL FILL
ALSO AN ATTACHMENT

241-1420 COVER GP-VALVE MECHANISM

241-1420 COVER GP-VALVE MECHANISM
S/N LBM1-101
FOR USE WITH @@@@@212-4287@@@@@
AN ATTACHMENT

241-1420 COVER GP-VALVE MECHANISM

241-1420 COVER GP-VALVE MECHANISM
S/N LBM102-UP
FOR USE WITH @@@@@212-4287@@@@@
AN ATTACHMENT

242-2409 COVER GP-VALVE MECHANISM

242-2409 COVER GP-VALVE MECHANISM
PART OF 222-5922 COVER GP-VALVE MECHANISM
AN ATTACHMENT

242-2411 COVER GP-VALVE MECHANISM

242-2411 COVER GP-VALVE MECHANISM
PART OF 222-5952 COVER GP-VALVE MECHANISM
AN ATTACHMENT

288-9177 COVER GP-VALVE MECHANISM

288-9177 COVER GP-VALVE MECHANISM
S/N LBM102-UP
PART OF 222-5920 COVER GP-VALVE MECHANISM
AN ATTACHMENT

212-4287 FASTENER GP-VALVE COVER

212-4287 FASTENER GP-VALVE COVER
FOR USE WITH @@@@@222-5920@@@@@, @@@@@222-5922@@@@@, @@@@@222-5952@@@@@
AN ATTACHMENT

235-5308 FASTENER GP-VALVE COVER

235-5308 FASTENER GP-VALVE COVER
FOR USE WITH @@@@@222-5920@@@@@, @@@@@222-5922@@@@@, @@@@@222-5952@@@@@
AN ATTACHMENT

239-5314 FASTENER GP-VALVE COVER

239-5314 FASTENER GP-VALVE COVER
S/N LBM102-UP
FOR USE WITH @@@@@222-5920@@@@@, @@@@@222-5922@@@@@, @@@@@222-5952@@@@@
ALSO AN ATTACHMENT

243-1551 FASTENER GP-VALVE COVER

243-1551 FASTENER GP-VALVE COVER
PROVIDES 8 ISOLATION FASTENERS, SLEEVES AND GROMMETS. 3 ISOLATION FASTENERS, SLEEVES, GROMMET, AND HARNESS FASTENING CLIPS ON RIGHT SIDE OF ENGINE
FOR USE WITH @@@@@222-5920@@@@@, @@@@@222-5922@@@@@, @@@@@222-5952@@@@@
AN ATTACHMENT

139-4081 LIFTER GP-VALVE

139-4081 LIFTER GP-VALVE -MECHANISM
PART OF 232-3717 VALVE MECHANISM GP

256-3831 ROCKER ARM GP

256-3831 ROCKER ARM GP -EXHAUST
S/N LBM101-UP
PART OF 256-3830 VALVE MECHANISM GP

256-3834 ROCKER ARM GP

256-3834 ROCKER ARM GP -INLET
S/N LBM101-UP
PART OF 256-3830 VALVE MECHANISM GP

232-3717 VALVE MECHANISM GP

232-3717 VALVE MECHANISM GP
S/N LBM1-100

232-3717 VALVE MECHANISM GP

232-3717 VALVE MECHANISM GP
S/N LBM101-UP

235-5528 VALVE MECHANISM GP

235-5528 VALVE MECHANISM GP
S/N LBM1-100
PART OF 232-3717 VALVE MECHANISM GP

256-3830 VALVE MECHANISM GP

256-3830 VALVE MECHANISM GP
S/N LBM101-UP
PART OF 232-3717 VALVE MECHANISM GP

Information:

(For parts list, see above)

BASIC ENGINE

ADAPTER GP-ENGINE TO XMSN

Specifications

Engine to Transmission Adapter
C7 On-highway Engine

AIR COMPRESSOR GP

Operation and Maintenance Manual

Air Compressor - Inspect
C7 On-highway Engine

Air Compressor Filter - Clean/Replace
C7 On-highway Engine

Service Letter-Australia

PRODUCT SUPPORT PROGRAM FOR REWORKING THE AIR COMPRESSOR ADAPTER ASSEMBLY ON CERTAIN C7 ENGINES INSTALLED IN GENERAL MOTORS CHASSIS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE AIR COMPRESSOR ADAPTER ASSEMBLY ON CERTAIN C7 ENGINES INSTALLED IN GENERAL MOTORS CHASSIS

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Specifications

Air Compressor - Bendix Tu-Flo Air Compressors
C7 On-highway Engine

Specification
BA-921 Bendix Air Compressor

Air Compressor Maintenance Procedures
BA-921 Bendix Air Compressor

Air Compressor
C7 On-highway Engine

Service Letter-China

Service Letter-Asia

Systems Operation

Operation of the Air Compressor
BA-921 Bendix Air Compressor

Air Induction
BA-921 Bendix Air Compressor

General Information
BA-921 Bendix Air Compressor

Cooling of the Air Compressor
BA-921 Bendix Air Compressor

Lubrication of the Air Compressor
BA-921 Bendix Air Compressor

Compression of Air (Loaded)
BA-921 Bendix Air Compressor

No Compression of Air (Unloaded)
BA-921 Bendix Air Compressor

Service Letter-APD

Testing and Adjusting

Excessive Build-Up and Recover Time
BA-921 Bendix Air Compressor

Air Compressor Cycles Constantly
BA-921 Bendix Air Compressor

Air Compressor Leaks Oil
BA-921 Bendix Air Compressor

Cylinder Head Gasket Failure
BA-921 Bendix Air Compressor

Air Compressor Leaks Coolant
BA-921 Bendix Air Compressor

Air Compressor Fails to Unload
BA-921 Bendix Air Compressor

Excessive Oil at Exhaust Ports or Air Strainer
BA-921 Bendix Air Compressor

Air Compressor Governor - Test and Adjust
BA-921 Bendix Air Compressor

Discharge Valve Leakage - Test
BA-921 Bendix Air Compressor

General Troubleshooting Information
BA-921 Bendix Air Compressor

Air Compressor is Noisy
BA-921 Bendix Air Compressor

Disassembly and Assembly

Air Compressor Drive Gear - Remove
C7 On-Highway Engine

Air Compressor Drive Gear - Install
C7 On-Highway Engine

Air Compressor - Remove and Install
C7 On-Highway Engine

Cylinder Head - Remove
BA-921 Bendix Air Compressor

Cylinder Head - Install
BA-921 Bendix Air Compressor

Air Compressor Drive Gear - Install - Two Cylinder
C7 On-Highway Engine

Unloader Piston - Install
BA-921 Bendix Air Compressor

Unloader Piston - Remove
BA-921 Bendix Air Compressor

BELT TIGHTENER GP

Operation and Maintenance Manual

Belt Tensioner - Inspect - If Equipped
C7 On-highway Engine

Specifications

Belt Tensioner
C7 On-highway Engine

ENGINE BRAKE GP

Operation and Maintenance Manual

Exhaust Brake
C7 On-highway Engine

Troubleshooting

Exhaust Brake Circuit - Test
C7 and C9 On-Highway Engines

CAMSHAFT GP

Specifications

Camshaft
C7 On-highway Engine

Reuse And Salvage Guidelines

Reuse and Salvage for Camshafts {1210, 1210}
Reuse and Salvage for Camshafts {1210, 1210}

Information Release Memo

APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS

Testing and Adjusting

Excessive Bearing Wear - Inspect
C7 On-highway Engine

Disassembly and Assembly

Camshaft - Remove
C7 On-Highway Engine

Camshaft - Install
C7 On-Highway Engine

Camshaft Gear - Remove and Install
C7 On-Highway Engine

Camshaft Bearings - Remove and Install
C7 On-Highway Engine

COMPRESSOR GP-REFRIGERANT

Specifications

Refrigerant Compressor
C7 On-highway Engine

CRANKSHAFT GP

Crankshaft Seals
C7 On-highway Engine

Crankshaft
C7 On-highway Engine

Connecting Rod Bearing Journal
C7 On-highway Engine

Main Bearing Journal
C7 On-highway Engine

Reuse And Salvage Guidelines

Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}

Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}

Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}

Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}

Testing and Adjusting

Excessive Bearing Wear - Inspect
C7 On-highway Engine

Main Bearings - Inspect
C7 On-highway Engine

Disassembly and Assembly

Bearing Clearance - Check
C7 On-Highway Engine

Crankshaft Main Bearings - Remove
C7 On-Highway Engine

Crankshaft Main Bearings - Install
C7 On-Highway Engine

Crankshaft - Remove
C7 On-Highway Engine

Crankshaft - Install
C7 On-Highway Engine

Crankshaft Gear - Remove and Install
C7 On-Highway Engine

Crankshaft Rear Seal - Remove
C7 On-Highway Engine

Crankshaft Front Seal - Remove
C7 On-Highway Engine

Crankshaft Front Seal - Install
C7 On-Highway Engine

Crankshaft Rear Seal - Install
C7 On-Highway Engine

CYLINDER BLOCK GP

Special Instruction

Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}

Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}

Specifications

Main Bearing Journal
C7 On-highway Engine

Piston Cooling Jet
C7 On-highway Engine

Cylinder Block
C7 On-highway Engine

Cylinder Block Cover Group
C7 On-highway Engine

Reuse And Salvage Guidelines

Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}

Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}

Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}

Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}

Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}

Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}

Testing and Adjusting

Cylinder Block - Inspect
C7 On-highway Engine

Excessive Bearing Wear - Inspect
C7 On-highway Engine

Main Bearings - Inspect
C7 On-highway Engine

Disassembly and Assembly

Bearing Clearance - Check
C7 On-Highway Engine

Piston Cooling Jets - Remove and Install
C7 On-Highway Engine

Crankshaft Main Bearings - Remove
C7 On-Highway Engine

Crankshaft Main Bearings - Install
C7 On-Highway Engine

Camshaft Bearings - Remove and Install
C7 On-Highway Engine

CYLINDER HEAD GP

Truck Engine News

Diagnostic Publications for the Systems of the Hydraulic Electronic Unit Injector (HEUI) have been Updated {1100, 1126, 1250, 1251, 1261, 1290}
2009/08/01

Operation and Maintenance Manual

Engine Valve Lash - Inspect/Adjust
C7 On-highway Engine

Cylinder Head Grounding Stud - Inspect/Clean/Tighten
C7 On-highway Engine

Special Instruction

Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}

Procedure for Troubleshooting and Cleaning the Oil Rail System for the Hydraulic Electronic Unit Injector (HEUI) {1100, 1126, 1250, 1251, 1261, 1290}
Procedure for Troubleshooting and Cleaning the Oil Rail System for the Hydraulic Electronic Unit Injector (HEUI) {1100, 1126, 1250, 1251, 1261, 1290}

Procedure to Improve Fuel Injectors on Certain Machine Engines {1100, 1126, 1250, 1251, 1290}
Procedure to Improve Fuel Injectors on Certain Machine Engines {1100, 1126, 1250, 1251, 1290}

Specifications

Cylinder Head Valves
C7 On-highway Engine

Cylinder Head
C7 On-highway Engine

Tool Operating Manual

{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}

Reuse And Salvage Guidelines

Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}

Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}

Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}

Information Release Memo

CAT REMAN ADDING CYLINDER HEAD KITS FOR 3126B, C7, C10/C12 APPLICATIONS
CAT REMAN ADDING CYLINDER HEAD KITS FOR 3126B, C7, C10/C12 APPLICATIONS

APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS

Testing and Adjusting

Engine Valve Lash - Inspect/Adjust
C7 On-highway Engine

Disassembly and Assembly

Inlet and Exhaust Valves - Remove and Install
C7 On-Highway Engine

Inlet and Exhaust Valve Guides - Remove and Install
C7 On-Highway Engine

Inlet and Exhaust Valve Seat Inserts - Remove and Install
C7 On-Highway Engine

Cylinder Head - Remove
C7 On-Highway Engine

Cylinder Head - Install
C7 On-Highway Engine

Unit Injector Sleeve - Remove
C7 On-Highway Engine

Unit Injector Sleeve - Install
C7 On-Highway Engine

Camshaft Bearings - Remove and Install
C7 On-Highway Engine

DAMPER GP

Operation and Maintenance Manual

Crankshaft Vibration Damper - Inspect
C7 On-highway Engine

Specifications

Vibration Damper
C7 On-highway Engine

Reuse And Salvage Guidelines

Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}

Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}

Testing and Adjusting

Vibration Damper - Check
C7 On-highway Engine

Disassembly and Assembly

Vibration Damper and Pulley - Remove and Install
C7 On-Highway Engine

DRIVE GP-FAN

Operation and Maintenance Manual

Fan Drive Bearing - Lubricate
C7 On-highway Engine

Specifications

Fan Drive Mounting Group
C7 On-highway Engine

Disassembly and Assembly

Fan Drive Mounting Group - Remove and Install
C7 On-Highway Engine

ENGINE GP

Special Instruction

Oil and Your Engine {1000}
Oil and Your Engine {1000}

Service Magazine

Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}

FASTENER GP-ENGINE

Reuse And Salvage Guidelines

Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}

FLYWHEEL GP

Specifications

Flywheel
C7 On-highway Engine

Engine to Transmission Adapter
C7 On-highway Engine

Flywheel Housing
C7 On-highway Engine

Flywheel
C7 On-highway Engine

Reuse And Salvage Guidelines

Reuse and Salvage for Flywheel Assemblies {1156}
Reuse and Salvage for Flywheel Assemblies {1156}

Testing and Adjusting

Flywheel - Inspect
C7 On-highway Engine

Disassembly and Assembly

Flywheel - Remove
C7 On-Highway Engine

Flywheel - Install
C7 On-Highway Engine

GEAR GP

Special Instruction

Troubleshooting Engine Vibration{1000, 1151, 1162, 1206}
Troubleshooting Engine Vibration{1000, 1151, 1162, 1206}

Specifications

Gear Group (Front)
C7 On-highway Engine

Reuse And Salvage Guidelines

Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}

Testing and Adjusting

Gear Group (Front) - Time
C7 On-highway Engine

Disassembly and Assembly

Camshaft Idler Gear - Remove and Install
C7 On-Highway Engine

HOUSING GP-FLYWHEEL

Specifications

Flywheel Housing
C7 On-highway Engine

Testing and Adjusting

Flywheel Housing - Inspect
C7 On-highway Engine

Disassembly and Assembly

Flywheel Housing - Remove and Install
C7 On-Highway Engine

HOUSING GP-FRONT

Special Instruction

Troubleshooting Engine Vibration{1000, 1151, 1162, 1206}
Troubleshooting Engine Vibration{1000, 1151, 1162, 1206}

Specifications

Crankshaft Seals
C7 On-highway Engine

Front Housing and Covers
C7 On-highway Engine

Reuse And Salvage Guidelines

Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}

Disassembly and Assembly

Housing (Front) - Remove
C7 On-Highway Engine

Housing (Front) - Install
C7 On-Highway Engine

Front Cover - Remove
C7 On-Highway Engine

Front Cover - Install
C7 On-Highway Engine

MISCELLANEOUS INFORMATION

Operation and Maintenance Manual

Overhaul Considerations
C7 On-highway Engine

MOUNTING GP-ENGINE

Engine Mounts - Inspect
C7 On-highway Engine

PAN GP-OIL

Specifications

Engine Oil Level Switch
C7 On-highway Engine

Engine Oil Pan
C7 On-highway Engine

Disassembly and Assembly

Engine Oil Pan - Remove and Install
C7 On-Highway Engine

PISTON & ROD GP

Special Instruction

Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}

Technical Information Bulletin

Specifications

Connecting Rod Bearing Journal
C7 On-highway Engine

Piston Cooling Jet
C7 On-highway Engine

Connecting Rod
C7 On-highway Engine

Piston and Rings
C7 On-highway Engine

Tool Operating Manual

NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}

Reuse And Salvage Guidelines

Reuse and Salvage for Connecting Rods {1218}
Reuse and Salvage for Connecting Rods {1218}

Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}

Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}

Testing and Adjusting

Excessive Bearing Wear - Inspect
C7 On-highway Engine

Engine Crankcase Pressure (Blowby) - Test
C7 On-highway Engine

Piston Ring Groove - Inspect
C7 On-highway Engine

Disassembly and Assembly

Bearing Clearance - Check
C7 On-Highway Engine

Piston Cooling Jets - Remove and Install
C7 On-Highway Engine

Pistons and Connecting Rods - Remove
C7 On-Highway Engine

Pistons and Connecting Rods - Install
C7 On-Highway Engine

Connecting Rod Bearings - Remove
C7 On-Highway Engine

Pistons and Connecting Rods - Disassemble
C7 On-Highway Engine

Pistons and Connecting Rods - Assemble
C7 On-Highway Engine

Connecting Rod Bearings - Install
C7 On-Highway Engine

Service Magazine

New Fractured Connecting Rod is Now Available for Certain Engines {1218}
New Fractured Connecting Rod is Now Available for Certain Engines {1218}

POWER TAKE-OFF GP

Systems Operation

Rear Power Take-Off (RPTO)
C7 On-highway Engine

PULLEY GP

Operation and Maintenance Manual

Crankshaft Vibration Damper - Inspect
C7 On-highway Engine

Specifications

Crankshaft Pulley
C7 On-highway Engine

Reuse And Salvage Guidelines

Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}

Disassembly and Assembly

Vibration Damper and Pulley - Remove and Install
C7 On-Highway Engine

TOOLS

Special Instruction

Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}

Technical Information Bulletin

368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}

Tool Operating Manual

NEHS0566 4C-9832 Large Engine Roll-Over Stand {0599, 0701}
NEHS0566 4C-9832 Large Engine Roll-Over Stand {0599, 0701}

NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}

NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}

{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}

Reuse And Salvage Guidelines

Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}

Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}

Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}

Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}

Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}

Service Magazine

Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}

SERPENTINE/V-BELTS

Operation and Maintenance Manual

Belt - Inspect
C7 On-highway Engine

Belt Tensioner - Inspect - If Equipped
C7 On-highway Engine

VALVE MECHANISM GP

Engine Valve Lash - Inspect/Adjust
C7 On-highway Engine

Specifications

Valve Rocker Arms, Lifters, and Bridges
C7 On-highway Engine

Valve Mechanism Cover
C7 On-highway Engine

Reuse And Salvage Guidelines

Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}

Information Release Memo

CAT REMAN ADDING CYLINDER HEAD KITS FOR 3126B, C7, C10/C12 APPLICATIONS
CAT REMAN ADDING CYLINDER HEAD KITS FOR 3126B, C7, C10/C12 APPLICATIONS

APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS

Testing and Adjusting

Engine Valve Lash - Inspect/Adjust
C7 On-highway Engine

Finding Top Center Position for No. 1 Piston
C7 On-highway Engine

Disassembly and Assembly

Rocker Shaft - Disassemble
C7 On-Highway Engine

Rocker Shaft - Assemble
C7 On-Highway Engine

Valve Mechanism Cover Base - Remove and Install
C7 On-Highway Engine

Rocker Shaft and Pushrod - Remove
C7 On-Highway Engine

Rocker Shaft and Pushrod - Install
C7 On-Highway Engine

Valve Mechanism Cover - Remove and Install
C7 On-Highway Engine

Lifter Group - Remove and Install
C7 On-Highway Engine

COVER GP-ENGINE

Reuse And Salvage Guidelines

Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}