365-4064 ENGINE AR-CORE S/N GES812-UP C18 MARINE ENGINE

Part No	Qty	Parts name
278-5662 Y	[1]	BASE GP-VALVE COVER & INJ HARN
299-1446 Y	[1]	CAMSHAFT GP
189-4917 Y	[1]	CRANKSHAFT GP
		-OR-
366-6114 Y	[1]	CRANKSHAFT GP
261-0191 Y	[1]	CYLINDER BLOCK GP
		-OR-
358-6883 Y	[1]	CYLINDER BLOCK GP
312-8590 Y	[1]	CYLINDER HEAD GP
283-5149 Y	[1]	GEAR GP-FRONT
		-OR-
366-0232 Y	[1]	GEAR GP-FRONT
190-0009 Y	[1]	MECHANISM GP-FUEL PUMP & VALVE
283-7669 Y	[6]	PISTON & ROD GP
226-1191 Y	[1]	PUMP GP-ENGINE OIL
261-0048 Y	[6]	PUMP GP-FUEL INJECTION
174-5986 Y	[1]	PUMP GP-WATER
		-OR-
384-4520 Y	[1]	PUMP GP-WATER
R		REMANUFACTURED PART MAY BE AVAILABLE
Y		SEPARATE ILLUSTRATION

#SEBP47680061

361-8242: ADAPTER GP-AUXILIARY DRIVE

ADAPTER GP-AUXILIARY DRIVE

361-8242 ADAPTER GP-AUXILIARY DRIVE
S/N GES812-UP
PART OF 366-0234 DRIVE GP-PUMP

i04403326 SEBP4768

3618242 ADAPTER GP-AUXILIARY DRIVE Parts scheme

For full view, you need register

Parts for your C18 MARINE ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	133-9906	[1]	ADAPTER
2.	361-8241	[1]	GEAR (30-TEETH)
3.	1B-3867	[2]	BALL BEARING
4.	1H-8647	[1]	RING-SNAP
5.	4F-7957	[3]	BOLT (1/4-20X0.875-IN)
6.	9X-2038	[3]	WASHER (7X19X2-MM THK)

#SEBP47680062

133-9907: ADAPTER GP-PUMP DRIVE

ADAPTER GP-PUMP DRIVE

133-9907 ADAPTER GP-PUMP DRIVE
PART OF 6I-3638 DRIVE GP-PUMP
ALSO AN ATTACHMENT

i00506272 SEBP4768

1339907 ADAPTER GP-PUMP DRIVE Parts scheme

For full view, you need register

Parts for your C18 MARINE ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1B-3867	[2]	BALL BEARING
2.	4F-7957	[3]	BOLT (1/4-20X0.875-IN)
3.	6I-4575	[1]	GEAR (34-TEETH)
4.	9X-2038	[3]	WASHER (7X19X2-MM THK)
5.	133-9906	[1]	ADAPTER
6.	1H-8647	[1]	RING-SNAP

#SEBP47680063

278-5662: BASE GP-VALVE COVER & INJ HARN

BASE GP-VALVE COVER & INJ HARN

278-5662 BASE GP-VALVE COVER & INJ HARN
ALSO AN ATTACHMENT

i02680543 SEBP4768

2785662 BASE GP-VALVE COVER & INJ HARN Parts scheme

For full view, you need register

Parts for your C18 MARINE ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	123-3202	[6]	STRAP-CABLE
2.	6V-0128	[1]	SEAL-CONNECTOR
3.	7E-6508	[6]	CAP AS
4.	9L-8925	[14]	BOLT (5/16-18X1.25-IN)
5.	122-1472	[1]	BOLT (5/16-18X2.36-IN)
6.	419-3614 C	[1]	BASE-VALVE COVER
7.	425-0289 Y	[1]	HARNESS AS-WIRING
8.	326-4512	[6]	MOUNTING-CABLE TIE
9.	272-0390 C	[1]	SEAL
10.	4F-7957	[2]	BOLT (1/4-20X0.875-IN)
11.	5P-0537	[2]	WASHER-HARD (7.2X14.5X2-MM THK)
	C		CHANGE FROM PREVIOUS TYPE
	Y		SEPARATE ILLUSTRATION

#SEBP47680064

243-0551: CAMSHAFT GP

CAMSHAFT GP

243-0551 CAMSHAFT GP
ALSO AN ATTACHMENT

i01996443 SEBP4768

For full view, you need register

Parts for your C18 MARINE ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6V-1197	[1]	SEAL-O-RING
2.	102-9089	[1]	COVER
3.	119-0036	[3]	SCREW-FLAT HEAD (5/16-18X0.875-IN)
4.	332-7297	[1]	CAMSHAFT
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP47680065

299-1446: CAMSHAFT GP

CAMSHAFT GP

299-1446 CAMSHAFT GP
ALSO AN ATTACHMENT

i02680236 SEBP4768

For full view, you need register

Parts for your C18 MARINE ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	102-9089	[1]	COVER
2.	119-0036	[3]	SCREW-FLAT HEAD (5/16-18X0.875-IN)
3.	332-7315	[1]	CAMSHAFT
4.	6V-1197	[1]	SEAL-O-RING
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP47680066

5N-3790: CLUTCH AS

CLUTCH AS

5N-3790 CLUTCH AS
PART OF 5N-7330 CLUTCH GP
AN ATTACHMENT

i00384817 SEBP4768

For full view, you need register

Parts for your C18 MARINE ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5L-2016	[1]	PLATE-HUB & BACK
2.	3N-7952	[2]	PLATE-DRIVE
3.	5L-2012	[1]	PLATE-CENTER
4.	3N-7953	[1]	PLATE AS
5.	3N-7954	[1]	LOCK PIN
6.	3N-7955	[1]	SPRING
7.	6L-3966	[3]	PIN
8.	6L-3964	[3]	PIN-COTTER
9.	2L-8259	[3]	LEVER
10.	5B-5251	[6]	LINK
11.	6L-3960	[6]	PIN-COTTER
12.	6L-3965	[6]	PIN
13.	5D-2751	[6]	WASHER-SPRING (0.406X0.687X0.125-IN THK)
14.	1K-2811	[1]	COLLAR AS
	0L-0639	[2]	BOLT (3/8-24X2.25-IN)
	2L-6267	[2]	LOCKNUT (3/8-24-THD)
	1K-3621 B	[2]	SHIM
15.	5L-9647	[1]	SLEEVE-SLIDING
16.	2L-8262	[1]	RING-ADJUSTMENT
	B		USE AS REQUIRED

#SEBP47680067

5N-7330: CLUTCH GP

CLUTCH GP

5N-7330 CLUTCH GP
PART OF 257-7442 POWER TAKE-OFF GP
AN ATTACHMENT

i00387179 SEBP4768

For full view, you need register

Parts for your C18 MARINE ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5L-2017	[1]	NUT (1-3/4-16-THD)
	5L-2026	[1]	LOCK
2.	1N-7513	[1]	KEY-WOODRUFF
3.	5N-3790 Y	[1]	CLUTCH AS
4.	3L-8049	[1]	RING-DRIVE (72-TEETH)
5.	7W-5729 C	[1]	HOUSING-CLUTCH
6.	108-3561	[1]	PLATE-INSTRUCTION (POWER TAKE-OFF)
	1L-6931	[2]	SCREW AS-MACHINE (1/4-20X0.5-IN)
7.	3B-8489	[4]	FITTING-GREASE (1/8-27 PTF)(CLUTCH)
8.	9S-1354	[1]	NUT (5/8-18-THD)
	4K-0499	[1]	LOCKWASHER
9.	4W-8403 CI	[1]	HOSE AS
10.	4B-4810	[1]	LEVER AS-HAND
	0S-1587	[1]	BOLT (1/2-13X1.75-IN)
11.	5N-7095	[1]	PLATE-SEAL
12.	1P-4693	[1]	CUP-BEARING
	6V-2735	[1]	CONE-BEARING
13.	5N-7094	[1]	SPACER (120.65X136X93.69-MM THK)
14.	2D-9454	[1]	CUP-BEARING
	6V-2734	[1]	CONE-BEARING
15.	0S-1594	[3]	BOLT (3/8-16X1-IN)
16.	5N-7440	[1]	PLATE-SEAL
17.	5P-5813	[1]	LOCKNUT-BEARING (2.75X18-THD)
	4V-7173	[1]	LOCKNUT
18.	6B-8865	[1]	KEY-WOODRUFF
19.	5N-7442	[1]	SHAFT-CLUTCH
20.	012-7950	[2]	PLUG
21.	4B-4756	[1]	SHAFT
22.	4W-8404 C	[1]	FITTING
23.	5N-7471	[1]	WASHER (72X100X6-MM THK)
24.	5N-7153	[1]	SPACER (76X88.9X93.63-MM THK)
25.	3B-1915	[6]	BOLT (3/8-16X1.375-IN)
26.	0S-1591	[2]	BOLT (3/8-16X1.5-IN)
27.	1K-2673	[1]	YOKE
28.	6L-5151	[2]	KEY-WOODRUFF
29.	3B-0623	[2]	PLUG-CUP
30.	2N-1287 C	[1]	ELBOW-FLARED
	C		CHANGE FROM PREVIOUS TYPE
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	Y		SEPARATE ILLUSTRATION

#SEBP47680068

107-6736: COVER GP-CYLINDER BLOCK

COVER GP-CYLINDER BLOCK

107-6736 COVER GP-CYLINDER BLOCK
FOR USE WITH MID MOUNTED TURBO AND/OR RH OIL FILL
ALSO AN ATTACHMENT

i00472957 SEBP4768

1076736 COVER GP-CYLINDER BLOCK Parts scheme

For full view, you need register

Parts for your C18 MARINE ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	0S-1594	[2]	BOLT (3/8-16X1-IN)
2.	5M-2894	[2]	WASHER-HARD (10.2X18.5X2.5-MM THK)
3.	4W-9890	[1]	COVER
4.	4N-0699	[1]	GASKET

#SEBP47680069

107-6737: COVER GP-CYLINDER BLOCK

COVER GP-CYLINDER BLOCK

107-6737 COVER GP-CYLINDER BLOCK
ALSO AN ATTACHMENT

i00472959 SEBP4768

1076737 COVER GP-CYLINDER BLOCK Parts scheme

For full view, you need register

Parts for your C18 MARINE ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	0S-1594	[2]	BOLT (3/8-16X1-IN)
2.	5M-2894	[2]	WASHER-HARD (10.2X18.5X2.5-MM THK)
3.	4W-9890	[1]	COVER
4.	4N-0699	[1]	GASKET

Information:

ENGINE ARRANGEMENT

ENGINE AR

Truck Engine News

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}

Engine News

Proper Storage Procedures for Commercial Engines {0355, 1000}
Proper Storage Procedures for Commercial Engines {0355, 1000}

Concerns for Engines with Seawater Cooling in Oil Polluted Water {1000, 1394}
2010/06/17

Contamination Control Guidelines for Marine Engine Rebuilds, Repair, and/or Overhauls {1000}
2010/10/18

A New Assembly Procedure at the Factory Is Now Used on Certain C18 Marine Engines with a Sea Water Pump and a Bronze Impeller {1000, 1361}
2013/08/06

Caterpillar Marine Engine - Proper Operation "Quick Reference" {1000}
2013/10/28

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/23

New Engine Software Is Used On Certain C18 Marine Engines {1000, 1900, 1901, 1920}
New Engine Software Is Used On Certain C18 Marine Engines {1000, 1900, 1901, 1920}

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}

Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}
Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}

Operation and Maintenance Manual

Starting the Engine
C18 Marine Auxiliary Engine

Welding on Engines with Electronic Controls
C18 Marine Auxiliary Engine

Maintenance Recommendations
C18 Marine Auxiliary Engine

Special Instruction

Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}
Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}

Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}

Storage Procedure for Caterpillar Products {0355, 1000, 7000}
Storage Procedure for Caterpillar Products {0355, 1000, 7000}

Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}

Differences in Appearance of Cat <SUP>®</SUP> Reman Parts when Compared to New Parts {1000, 1250}
Differences in Appearance of Cat ^® Reman Parts when Compared to New Parts {1000, 1250}

Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}
Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}

Technical Information Bulletin

Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}

368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}

Specifications

Engine Design
C18 Marine and Marine Generator Set Engines

Tool Operating Manual

NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}

NEHS1207 Using the 464-1090 Marine Sea Trial Group with the MultiTool {0374, 0599, 0701, 0709}
NEHS1207 Using the 464-1090 Marine Sea Trial Group with the MultiTool {0374, 0599, 0701, 0709}

Systems Operation

General Information
C18 Marine and Marine Generator Set Engines

Reuse And Salvage Guidelines

Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}
Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}

Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}

Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}

HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}

Cleaning Components with Carbon Dioxide (CO<SUB>2</SUB>) {0680, 1000, 7000}
Cleaning Components with Carbon Dioxide (CO₂) {0680, 1000, 7000}

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}

Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}

Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}

Contamination Control Guidelines

Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}

Applied Failure Analysis

Failure Analysis Report - AFA Good Report {0374, 1000}
Failure Analysis Report - AFA Good Report {0374, 1000}

Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}
Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}

Product Evaluation Report - AFA Bad Report {0374, 1000}
Product Evaluation Report - AFA Bad Report {0374, 1000}

Information Release Memo

CAT REMAN ANNOUNCES ADDITION OF COMPLETE ENGINES FOR C18 APPLICATIONS
CAT REMAN ANNOUNCES ADDITION OF COMPLETE ENGINES FOR C18 APPLICATIONS

APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS

Technical Analysis

Technical Analysis 1 (TA1) Visual Inspection for Marine Engine {0372, 1000, 7000, 753S, 7565}
Technical Analysis 1 (TA1) Visual Inspection for Marine Engine {0372, 1000, 7000, 753S, 7565}

Troubleshooting

Service Information Report
C18 Marine Auxiliary Engines

Welding Precaution
C18 Marine Auxiliary Engines

Symptom Troubleshooting
C18 Marine Auxiliary Engines

System Overview
C18 Marine Auxiliary Engines

Timing - Calibrate
C18 Marine Auxiliary Engines

Acceleration Is Poor or Throttle Response Is Poor
C18 Marine Auxiliary Engines

Engine Cranks but Does Not Start
C18 Marine Auxiliary Engines

Engine Vibration Is Excessive
C18 Marine Auxiliary Engines

Power Is Intermittently Low or Power Cutout Is Intermittent
C18 Marine Auxiliary Engines

Engine Stalls at Low RPM
C18 Marine Auxiliary Engines

Component Location
C18 Marine Auxiliary Engines

Engine Has Mechanical Noise (Knock)
C18 Marine Auxiliary Engines

Engine Overspeeds
C18 Marine Auxiliary Engines

Engine Top Speed Is Not Obtained
C18 Marine Auxiliary Engines

General Information
C18 Marine Auxiliary Engines

Engine Misfires, Runs Rough or Is Unstable
C18 Marine Auxiliary Engines

Engine Does Not Crank
C18 Marine Auxiliary Engines

Service Magazine

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/18

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}

Process to Print Collage Schematics {0374, 1000, 7000}
Process to Print Collage Schematics {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}

A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}
A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}

Caterpillar Parts SIS Catalog C18 :

365-4052 ENGINE AR-CORE

357-6596 ENGINE AR-CORE

357-6594 ENGINE AR-CORE

328-6089 ENGINE AR-CORE

328-6088 ENGINE AR-CORE

328-6087 ENGINE AR-CORE

328-6086 ENGINE AR-CORE

290-6545 ENGINE AR-CORE

361-8242 ADAPTER GP-AUXILIARY DRIVE

133-9907 ADAPTER GP-PUMP DRIVE

278-5662 BASE GP-VALVE COVER & INJ HARN

107-6736 COVER GP-CYLINDER BLOCK

Truck sale:

89,000 USD

Caterpillar C18, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC

34,700

Caterpillar C18, Construction
- mobile generator sets
MOHAMED ABDULRAHMAN AL-BAHAR
United Arab Emirates

34,800

Caterpillar C18, Construction
- mobile generator sets
MOHAMED ABDULRAHMAN AL-BAHAR
United Arab Emirates

32,850

Caterpillar C18, Construction
- mobile generator sets
MOHAMED ABDULRAHMAN AL-BAHAR
United Arab Emirates

36,800

Caterpillar C18, Construction
- mobile generator sets
MOHAMED ABDULRAHMAN AL-BAHAR
United Arab Emirates