AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

456-0007 KIT-ENGINE GASKET -SINGLE CYLINDER HEAD CONTAINS THE GASKETS, SEALS, & BENDABLE LOCKS TO REBUILD & REINSTALL A CYLINDER HEAD. KIT INCLUDES THE TURBO GASKETS, BUT DOES NOT INCLUDE THE FUEL INJECTOR SEALS. ORDER A SINGLE INJECTOR SEAL KIT, AS NEEDED. FOR IN LINE 4 & 6 CYLINDER ENGINES WITH ONE CYLINDER HEAD ONLY. THE FOLLOWING TURBO MOUNTING HARDWARE WILL BE INCLUDED: BOLTS, NUTS, STUDS, WASHERS, SPACERS. APPLIES TO SINGLE CYLINDER HEAD KIT PART NUMBERS 317-8750-UP PART OF 455-7246, 455-7249 KIT-ENGINE OVERHAUL FOR USE WITH @@@@@320-9785@@@@@, @@@@@345-8304@@@@@, PA7765, PQ0166, PQ0330, PQ0282 & PQ0298, GZ0215 & GZ0231 FIELD INSTALLATION C18


ENGINE ARRANGEMENT
ENGINE AR
SERVICE EQUIPMENT AND SUPPLIES
KIT-REBUILD

MARINE ENGINE C18 MARINE ENGINE J2K
 C18 Marine Engine J2K00001-UP SEBP4770 C18 J2K   (2006)

ENGINE ARRANGEMENT

ENGINE AR
455-3631 KIT-ENGINE GASKET
455-9998 KIT-ENGINE GASKET
456-0007 KIT-ENGINE GASKET
473-2334 KIT-ENGINE GASKET
491-2466 KIT-ENGINE GASKET
491-7463 KIT-ENGINE GASKET
 

#SEBP47700200
 

456-0007: KIT-ENGINE GASKET

456-0007 KIT-ENGINE GASKET -SINGLE CYLINDER HEAD
CONTAINS THE GASKETS, SEALS, & BENDABLE LOCKS TO REBUILD & REINSTALL A CYLINDER HEAD. KIT INCLUDES THE TURBO GASKETS, BUT DOES NOT INCLUDE THE FUEL INJECTOR SEALS. ORDER A SINGLE INJECTOR SEAL KIT, AS NEEDED. FOR IN LINE 4 & 6 CYLINDER ENGINES WITH ONE CYLINDER HEAD ONLY. THE FOLLOWING TURBO MOUNTING HARDWARE WILL BE INCLUDED: BOLTS, NUTS, STUDS, WASHERS, SPACERS. APPLIES TO SINGLE CYLINDER HEAD KIT PART NUMBERS 317-8750-UP
PART OF 455-7246, 455-7249 KIT-ENGINE OVERHAUL
FOR USE WITH @@@@@320-9785@@@@@, @@@@@345-8304@@@@@, PA7765, PQ0166, PQ0330, PQ0282 & PQ0298, GZ0215 & GZ0231
FIELD INSTALLATION
i05926619 SEBP4770
  For full view, you need register

Parts for your C18 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  6I-2517 [1] GASKET  
  7M-7273 [2] GASKET (TURBOCHARGER)  
  227-1204 [1] GASKET  
  359-0908 [1] GASKET-CYLINDER HEAD  
  129-9452 [6] GASKET-EXHAUST MANIFOLD  
  149-7378 [18] GROMMET  
  2N-2766 [8] LOCKNUT (3/8-16-THD)  
  142-2329 [1] SEAL  
  160-7271 [1] SEAL  
  272-0390 [1] SEAL  
  3E-6772 [24] SEAL (WATER)  
  6V-0128 [1] SEAL-CONNECTOR  
  3J-1907 [3] SEAL-O-RING  
  5E-8771 [1] SEAL-O-RING  
  5P-0840 [2] SEAL-O-RING  
  5P-7530 [2] SEAL-O-RING  
  6J-2245 [2] SEAL-O-RING  
  6V-1197 [1] SEAL-O-RING  
  6V-3917 [4] SEAL-O-RING  
  6V-4367 [1] SEAL-O-RING  
  6V-5048 [3] SEAL-O-RING  
  6V-6609 [2] SEAL-O-RING  
  6V-8397 [2] SEAL-O-RING  
  7M-8485 [1] SEAL-O-RING  
  8L-2786 [2] SEAL-O-RING  
  109-0072 [1] SEAL-O-RING  
  109-0073 [1] SEAL-O-RING  
  110-7753 [1] SEAL-O-RING  
  112-1102 [1] SEAL-O-RING  
  114-2687 [2] SEAL-O-RING  
  117-8801 [1] SEAL-O-RING  
  130-5694 [2] SEAL-O-RING  
  214-7568 [11] SEAL-O-RING  
  228-4947 [1] SEAL-O-RING  
  238-5078 [2] SEAL-O-RING  
  238-5080 [5] SEAL-O-RING  
  238-5081 [1] SEAL-O-RING  
  272-2583 [1] SEAL-O-RING  
  242-9537 [3] SEAL-VALVE COVER  
  6L-8562 [8] STUD-TAPERLOCK (3/8-16X1.77-IN)  
   
    FOR A LIST OF RELATED PARTS THAT REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT
   
    HTTPS://DEALER.CAT.COM/RELATED
 

#SEBP47700201
 

473-2334: KIT-ENGINE GASKET

473-2334 KIT-ENGINE GASKET -WATER PUMP
KIT CONTAINS GASKETS AND SEALS TO REINSTALL WATER PUMP AND ATTACHING LINES
FIELD INSTALLATION
i06113269 SEBP4770
  For full view, you need register

Parts for your C18 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  125-0434 [1] SEAL-INTEGRAL  
  6V-8398 [1] SEAL-O-RING  
  109-0093 [1] SEAL-O-RING  
  6V-3250 [1] SEAL-O-RING  
  6V-5063 [1] SEAL-O-RING  
  109-0077 [1] SEAL-O-RING  
  122-3772 [1] SEAL-O-RING  
   
    FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT
   
    HTTP://DEALER.CAT.COM/RELATED
 

#SEBP47700202
 

491-2466: KIT-ENGINE GASKET

491-2466 KIT-ENGINE GASKET
KIT TO PROVIDE AN EXHAUST GAS COOLER AND GASKET FOR C18 MARINE ENGINE FOR USE IN HAZARDOUS LOCATIONS
FOR USE WITH C18 MARINE (HAZARDOUS LOCATIONS)
AN ATTACHMENT
i06735523 SEBP4770
  For full view, you need register

Parts for your C18 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    (NO SERVICED PARTS)
 

#SEBP47700203
 

491-7463: KIT-ENGINE GASKET

491-7463 KIT-ENGINE GASKET
KITCONTAINS GASKETS AND SEALS TO REINSTALL THE TURBOS AND ATTACHING LINES. KIT INCLUDES TURBO MOUNTING HARDWARE
FIELD INSTALLATION
i06715992 SEBP4770
  For full view, you need register

Parts for your C18 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  7M-7273 [1] GASKET  
  391-2167 [4] LOCKNUT-FLANGE (3/8X16-THD)  
  5P-7530 [1] SEAL-O-RING  
  323-7347 [1] SEAL-O-RING  
  6V-3917 [2] SEAL-O-RING  
  130-5694 [2] SEAL-O-RING  
  3D-2824 [1] SEAL-O-RING  
  5K-9090 [1] SEAL-O-RING  
  6V-5063 [1] SEAL-O-RING  
  6V-5266 [1] SEAL-O-RING  
  112-3540 [1] SEAL-O-RING  
  136-7227 [1] SEAL-O-RING  
  516-5987 [4] STUD-TAPERLOCK (3/8-16X1.77-IN)  
   
    FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT
   
    HTTP://DEALER.CAT.COM/RELATED
 

#SEBP47700204
 

567-4719: KIT-ENGINE GASKET

567-4719 KIT-ENGINE GASKET
REAR STRUCTURE
FOR USE WITH @@@@@320-9810@@@@@
FIELD INSTALLATION
i07501544 SEBP4770
  For full view, you need register

Parts for your C18 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  2A-1162 [2] GASKET  
  9Y-6089 [1] GASKET  
  198-1517 [2] GASKET  
  268-5582 [1] SEAL  
  268-5589 [1] SEAL  
  142-5868 [1] SEAL-CRANKSHAFT (REAR)(REAR)  
  160-7037 [1] SEAL-INTEGRAL  
  6V-5266 [1] SEAL-O-RING  
  112-3540 [1] SEAL-O-RING  
  230-3728 [1] SEAL-O-RING  
   
    FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT
   
    HTTP://DEALER.CAT.COM/RELATED
 

#SEBP47700205
 

455-1185: KIT-ENGINE OVERHAUL

455-1185 KIT-ENGINE OVERHAUL -MAJOR REPAIR
FOR USE WITH @@@@@290-5693@@@@@, @@@@@320-9791@@@@@, @@@@@320-9802@@@@@, @@@@@320-9803@@@@@, @@@@@320-9807@@@@@, @@@@@320-9811@@@@@, REHS9297, MARINE ENGINE, PQ1449 & PQ1477
ALSO FIELD INSTALLATION
i05932802 SEBP4770
  For full view, you need register

Parts for your C18 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  417-9667 Y [1] KIT-ENGINE GASKET (REAR COVER)  
  453-2313 Y [1] KIT-ENGINE GASKET  
  455-1617 Y [1] KIT-ENGINE GASKET (AFTERCOOLER, LINES)  
  455-1741 Y [1] KIT-ENGINE GASKET (OIL COOLER, LINES)  
  455-1871 Y [1] KIT-ENGINE GASKET (CENTRAL, LOWER STRUCTURE)  
  455-9998 Y [1] KIT-ENGINE GASKET (SINGLE CYLINDER HEAD)  
  8S-9191 [6] BOLT (3/8-16X4-IN)  
  131-7123 [1] BUSHING  
  274-7913 [1] FILTER ELEMENT AS-AIR (CRANKCASE VENTILATION)  
  1R-1808 [2] FILTER-ENGINE OIL (ADVANCED EFFICIENCY)  
  1R-0749 [1] FILTER-FUEL (ADVANCED EFFICIENCY)  
  1P-0436 [1] GASKET (FUEL PRIMING PUMP)  
  166-9144 [1] GASKET  
  2N-2766 [12] LOCKNUT (3/8-16-THD)  
  392-9208 [3] PLUNGER-VALVE (RELIEF)  
  248-5513 [2] REGULATOR-TEMPERATURE (92-DEG C)(WATER, COOLANT)  
  6V-6923 [1] RING-BACKUP  
  6L-2280 [3] ROD-ZINC  
  297-1813 [12] SCREW-HEAD (5/16-18X1-IN)  
  142-5867 [1] SEAL-CRANKSHAFT (FRONT)  
  144-6142 [1] SEAL-INTEGRAL  
  155-9524 [1] SEAL-INTEGRAL  
  2S-4078 [2] SEAL-O-RING  
  3K-0360 [2] SEAL-O-RING  
  4K-1388 [1] SEAL-O-RING  
  6V-5048 [1] SEAL-O-RING  
  8T-9527 [1] SEAL-O-RING  
  033-6033 [1] SEAL-O-RING  
  061-9455 [1] SEAL-O-RING  
  107-5769 [2] SEAL-O-RING  
  109-0072 [1] SEAL-O-RING  
  109-0077 [1] SEAL-O-RING  
  122-3772 [1] SEAL-O-RING  
  205-4832 [2] SEAL-O-RING  
  228-4947 [2] SEAL-O-RING  
  230-3728 [1] SEAL-O-RING  
  238-5081 [1] SEAL-O-RING  
  4N-8150 [3] SPRING  
  106-1792 [12] STUD-TAPERLOCK (3/8-16X4-IN)  
  126-1757 [9] WASHER (10.85X19.3X1.27-MM THK)  
  129-5427 [2] WASHER-SPECIAL (SEALING)  
   
    FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD IN ADDITION TO THE KIT CONSIST, PLEASE VISIT:
   
    HTTPS://DEALER.CAT.COM/RELATED
  Y   SEPARATE ILLUSTRATION
 

#SEBP47700206
 

455-1186: KIT-ENGINE OVERHAUL

455-1186 KIT-ENGINE OVERHAUL -MAJOR REPAIR
FOR USE WITH @@@@@290-5693@@@@@, @@@@@320-9789@@@@@, @@@@@320-9793@@@@@, @@@@@320-9797@@@@@, @@@@@320-9800@@@@@, @@@@@320-9801@@@@@, @@@@@320-9805@@@@@, @@@@@320-9809@@@@@, @@@@@345-8311@@@@@, REHS9296, MARINE ENGINE, PQ1448, MC0460 & MC0476, MC0500 & MC0504, MC0524 & MC0528
ALSO FIELD INSTALLATION
i05927706 SEBP4770
  For full view, you need register

Parts for your C18 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  417-9667 Y [1] KIT-ENGINE GASKET (REAR COVER)  
  453-2313 Y [1] KIT-ENGINE GASKET  
  455-1617 Y [1] KIT-ENGINE GASKET (AFTERCOOLER, LINES)  
  455-1871 Y [1] KIT-ENGINE GASKET (CENTRAL, LOWER STRUCTURE)  
  455-3631 Y [1] KIT-ENGINE GASKET (OIL COOLER, LINES)  
  455-9998 Y [1] KIT-ENGINE GASKET (SINGLE CYLINDER HEAD)  
  8S-9191 [6] BOLT (3/8-16X4-IN)  
  131-7123 [1] BUSHING  
  274-7913 [1] FILTER ELEMENT AS-AIR (CRANKCASE VENTILATION)  
  1R-1808 [2] FILTER-ENGINE OIL (ADVANCED EFFICIENCY)  
  1R-0749 [1] FILTER-FUEL (ADVANCED EFFICIENCY)  
  1P-0436 [1] GASKET (FUEL PRIMING PUMP)  
  166-9144 [1] GASKET  
  2N-2766 [12] LOCKNUT (3/8-16-THD)  
  392-9208 [2] PLUNGER-VALVE (RELIEF)  
  248-5513 [2] REGULATOR-TEMPERATURE (92-DEG C)(WATER, COOLANT)  
  6V-6923 [1] RING-BACKUP  
  6L-2280 [3] ROD-ZINC  
  297-1813 [12] SCREW-HEAD (5/16-18X1-IN)  
  142-5867 [1] SEAL-CRANKSHAFT (FRONT)  
  144-6142 [1] SEAL-INTEGRAL  
  155-9524 [1] SEAL-INTEGRAL  
  2S-4078 [2] SEAL-O-RING  
  3K-0360 [4] SEAL-O-RING  
  4K-1388 [1] SEAL-O-RING  
  6V-5048 [1] SEAL-O-RING  
  6V-8397 [2] SEAL-O-RING  
  8T-9527 [1] SEAL-O-RING  
  033-6033 [1] SEAL-O-RING  
  061-9455 [1] SEAL-O-RING  
  107-5769 [2] SEAL-O-RING  
  109-0077 [1] SEAL-O-RING  
  122-3772 [1] SEAL-O-RING  
  205-4832 [2] SEAL-O-RING  
  228-4947 [2] SEAL-O-RING  
  4N-8150 [3] SPRING  
  106-1792 [12] STUD-TAPERLOCK (3/8-16X4-IN)  
  126-1757 [9] WASHER (10.85X19.3X1.27-MM THK)  
  129-5427 [2] WASHER-SPECIAL (SEALING)  
   
    FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD IN ADDITION TO THE KIT CONSIST, PLEASE VISIT:
   
    HTTPS://DEALER.CAT.COM/RELATED
  Y   SEPARATE ILLUSTRATION
 

#SEBP47700207
 

455-1188: KIT-ENGINE OVERHAUL

455-1188 KIT-ENGINE OVERHAUL -MAJOR REPAIR
*****DUE TO MULTIPLE ENGINE CONFIGURATIONS FOR THESE ARRANGEMENTS:241-9639, 241-9621, 241-9620, & 241-9632. PLEASE CONTACT YOUR DEALER WITH YOUR COMPLETE ENGINE SERIAL NUMBER TO ENSURE THE CORRECT KIT IS SELECTED. SERIAL NUMBER RANGES HAVE BEEN POSTED AT THE BOTTOM OF THE ENGINE ARRANGEMENT PARTS PAGE UNDER KITS.***
FOR USE WITH @@@@@290-5693@@@@@, REHS9294, MARINE ENGINE, PQ0189, PQ0190 & PQ0231, PQ0227 & PQ0241, PQ0228, PQ0223 & PQ0235, PQ0224, GZ0201 & GZ0217, GZ0203 & GZ0219, GZ0211 & GZ0227, PQ1476, LA5087 & LA5088, GZ0205 & GZ0221
FIELD INSTALLATION
i05934195 SEBP4770
  For full view, you need register

Parts for your C18 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  417-9667 Y [1] KIT-ENGINE GASKET (REAR COVER)  
  453-2313 Y [1] KIT-ENGINE GASKET  
  455-1190 Y [1] KIT-ENGINE GASKET (OIL COOLER, LINES)  
  455-1197 Y [1] KIT-ENGINE GASKET (CENTRAL, LOWER STRUCTURE)  
  455-1617 Y [1] KIT-ENGINE GASKET (AFTERCOOLER, LINES)  
  455-1738 Y [1] KIT-ENGINE GASKET (SINGLE CYLINDER HEAD)  
  8S-9191 [6] BOLT (3/8-16X4-IN)  
  101-8468 [1] BUSHING  
  130-4698 [1] BUSHING  
  131-7123 [1] BUSHING  
  274-7913 [1] FILTER ELEMENT AS-AIR (CRANKCASE VENTILATION)  
  1R-1808 [2] FILTER-ENGINE OIL (ADVANCED EFFICIENCY)  
  1R-0749 [1] FILTER-FUEL (ADVANCED EFFICIENCY)  
  2M-1395 [1] GASKET  
  2N-0931 [1] GASKET  
  166-9144 [1] GASKET  
  4N-1156 [1] GASKET-REGULATOR COVER  
  2N-2766 [12] LOCKNUT (3/8-16-THD)  
  392-9208 [2] PLUNGER-VALVE (RELIEF)  
  248-5513 [1] REGULATOR-TEMPERATURE (92-DEG C)(WATER, COOLANT)  
  6V-6923 [1] RING-BACKUP  
  6L-2280 [3] ROD-ZINC  
  297-1813 [12] SCREW-HEAD (5/16-18X1-IN)  
  142-5867 [1] SEAL-CRANKSHAFT (FRONT)  
  144-6142 [1] SEAL-INTEGRAL  
  155-9524 [1] SEAL-INTEGRAL  
  2S-4078 [2] SEAL-O-RING  
  3K-0360 [4] SEAL-O-RING  
  6V-4589 [1] SEAL-O-RING  
  6V-5048 [4] SEAL-O-RING  
  6V-6609 [1] SEAL-O-RING  
  6V-8397 [2] SEAL-O-RING  
  8T-9527 [1] SEAL-O-RING  
  033-6033 [1] SEAL-O-RING  
  061-9455 [1] SEAL-O-RING  
  107-5769 [2] SEAL-O-RING  
  109-0072 [1] SEAL-O-RING  
  109-0077 [1] SEAL-O-RING  
  122-3772 [1] SEAL-O-RING  
  205-4832 [2] SEAL-O-RING  
  214-7566 [1] SEAL-O-RING  
  214-7568 [6] SEAL-O-RING  
  228-4947 [2] SEAL-O-RING  
  230-3728 [1] SEAL-O-RING  
  238-5081 [1] SEAL-O-RING  
  4N-8150 [2] SPRING  
  106-1792 [12] STUD-TAPERLOCK (3/8-16X4-IN)  
  126-1757 [9] WASHER (10.85X19.3X1.27-MM THK)  
  129-5427 [2] WASHER-SPECIAL (SEALING)  
   
    FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD IN ADDITION TO THE KIT CONSIST, PLEASE VISIT:
   
    HTTPS://DEALER.CAT.COM/RELATED
  Y   SEPARATE ILLUSTRATION
 

#SEBP47700208
 

455-1192: KIT-ENGINE OVERHAUL

455-1192 KIT-ENGINE OVERHAUL -TOP END
FOR USE WITH @@@@@290-5693@@@@@, @@@@@320-9789@@@@@, @@@@@320-9793@@@@@, @@@@@320-9797@@@@@, @@@@@320-9800@@@@@, @@@@@320-9801@@@@@, @@@@@320-9805@@@@@, @@@@@320-9809@@@@@, @@@@@345-8311@@@@@, REHS9287, MARINE ENGINE, PQ1448, MC0460 & MC0476, MC0500 & MC0504, MC0524 & MC0528
ALSO FIELD INSTALLATION
i05927459 SEBP4770
  For full view, you need register

Parts for your C18 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  453-2313 Y [1] KIT-ENGINE GASKET  
  455-1617 Y [1] KIT-ENGINE GASKET (AFTERCOOLER, LINES)  
  455-3631 Y [1] KIT-ENGINE GASKET (OIL COOLER, LINES)  
  455-9998 Y [1] KIT-ENGINE GASKET (SINGLE CYLINDER HEAD)  
  8S-9191 [6] BOLT (3/8-16X4-IN)  
  274-7913 [1] FILTER ELEMENT AS-AIR (CRANKCASE VENTILATION)  
  1R-1808 [2] FILTER-ENGINE OIL (ADVANCED EFFICIENCY)  
  1R-0749 [1] FILTER-FUEL (ADVANCED EFFICIENCY)  
  1P-0436 [1] GASKET (FUEL PRIMING PUMP)  
  2N-2766 [12] LOCKNUT (3/8-16-THD)  
  248-5513 [2] REGULATOR-TEMPERATURE (92-DEG C)(WATER, COOLANT)  
  6V-6923 [1] RING-BACKUP  
  6L-2280 [3] ROD-ZINC  
  297-1813 [12] SCREW-HEAD (5/16-18X1-IN)  
  2S-4078 [2] SEAL-O-RING  
  3K-0360 [2] SEAL-O-RING  
  6V-5048 [1] SEAL-O-RING  
  6V-8397 [2] SEAL-O-RING  
  033-6033 [1] SEAL-O-RING  
  061-9455 [1] SEAL-O-RING  
  205-4832 [2] SEAL-O-RING  
  106-1792 [12] STUD-TAPERLOCK (3/8-16X4-IN)  
   
    FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD IN ADDITION TO THE KIT CONSIST, PLEASE VISIT:
   
    HTTPS://DEALER.CAT.COM/RELATED
  Y   SEPARATE ILLUSTRATION
 

#SEBP47700209
 

455-1195: KIT-ENGINE OVERHAUL

455-1195 KIT-ENGINE OVERHAUL -TOP END
*****DUE TO MULTIPLE ENGINE CONFIGURATIONS FOR THESE ARRANGEMENTS:241-9639, 241-9621, 241-9620, & 241-9632. PLEASE CONTACT YOUR DEALER WITH YOUR COMPLETE ENGINE SERIAL NUMBER TO ENSURE THE CORRECT KIT IS SELECTED.. SERIAL NUMBER RANGES HAVE BEEN POSTED AT THE BOTTOM OF THE ENGINE ARRANGEMENT PARTS PAGE UNDER KITS.***
FOR USE WITH @@@@@290-5693@@@@@, REHS9285, MARINE ENGINE, PQ0189, PQ0190 & PQ0231, PQ0227 & PQ0241, PQ0228, PQ0223 & PQ0235, PQ0224, GZ0201 & GZ0217, GZ0203 & GZ0219, GZ0211 & GZ0227, PQ1476, LA5087 & LA5088, GZ0205 & GZ0221
FIELD INSTALLATION
i05926953 SEBP4770
  For full view, you need register

Parts for your C18 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  453-2313 Y [1] KIT-ENGINE GASKET  
  455-1190 Y [1] KIT-ENGINE GASKET (OIL COOLER, LINES)  
  455-1617 Y [1] KIT-ENGINE GASKET (AFTERCOOLER, LINES)  
  455-1738 Y [1] KIT-ENGINE GASKET (SINGLE CYLINDER HEAD)  
  8S-9191 [6] BOLT (3/8-16X4-IN)  
  274-7913 [1] FILTER ELEMENT AS-AIR (CRANKCASE VENTILATION)  
  1R-1808 [2] FILTER-ENGINE OIL (ADVANCED EFFICIENCY)  
  1R-0749 [1] FILTER-FUEL (ADVANCED EFFICIENCY)  
  2N-2766 [12] LOCKNUT (3/8-16-THD)  
  248-5513 [1] REGULATOR-TEMPERATURE (92-DEG C)(WATER, COOLANT)  
  6V-6923 [1] RING-BACKUP  
  6L-2280 [3] ROD-ZINC  
  297-1813 [12] SCREW-HEAD (5/16-18X1-IN)  
  2S-4078 [2] SEAL-O-RING  
  3K-0360 [2] SEAL-O-RING  
  136-7227 [1] SEAL-O-RING  
  6V-5048 [4] SEAL-O-RING  
  6V-8397 [2] SEAL-O-RING  
  033-6033 [1] SEAL-O-RING  
  061-9455 [1] SEAL-O-RING  
  109-0072 [1] SEAL-O-RING  
  205-4832 [2] SEAL-O-RING  
  214-7568 [6] SEAL-O-RING  
  230-3728 [1] SEAL-O-RING  
  106-1792 [12] STUD-TAPERLOCK (3/8-16X4-IN)  
   
    FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD IN ADDITION TO THE KIT CONSIST, PLEASE VISIT:
   
    HTTPS://DEALER.CAT.COM/RELATED
  Y   SEPARATE ILLUSTRATION
 

Information:

Truck Engine News
Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/23
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}
Engine News
Procedure for the Return of Marine Engine Parts {1000}
2008/02/18
How Is Service Information Accessed / Used {1000}
2009/04/27
Proper Storage Procedures for Commercial Engines {0355, 1000}
Proper Storage Procedures for Commercial Engines {0355, 1000}
Concerns for Engines with Seawater Cooling in Oil Polluted Water {1000, 1394}
2010/06/17
Contamination Control Guidelines for Marine Engine Rebuilds, Repair, and/or Overhauls {1000}
2010/10/18
Caterpillar Marine Engine - Proper Operation "Quick Reference" {1000}
2013/10/28
Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}
Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}
Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}
Operation and Maintenance Manual
Starting the Engine
C18 Marine Engine
Welding on Engines with Electronic Controls
C18 Marine Engine
Maintenance Recommendations
C18 Marine Engine
Special Instruction
Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}
Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
Storage Procedure for Caterpillar Products {0355, 1000, 7000}
Storage Procedure for Caterpillar Products {0355, 1000, 7000}
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Differences in Appearance of Cat <SUP>&reg;</SUP> Reman Parts when Compared to New Parts {1000, 1250}
Differences in Appearance of Cat ® Reman Parts when Compared to New Parts {1000, 1250}
Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}
Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}
Technical Information Bulletin
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Specifications
Engine Design
C18 Marine and Marine Generator Set Engines
Tool Operating Manual
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1207 Using the 464-1090 Marine Sea Trial Group with the MultiTool {0374, 0599, 0701, 0709}
NEHS1207 Using the 464-1090 Marine Sea Trial Group with the MultiTool {0374, 0599, 0701, 0709}
Systems Operation
General Information
C18 Marine and Marine Generator Set Engines
Reuse And Salvage Guidelines
Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}
Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Cleaning Components with Carbon Dioxide (CO<SUB>2</SUB>) {0680, 1000, 7000}
Cleaning Components with Carbon Dioxide (CO2) {0680, 1000, 7000}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
Contamination Control Guidelines
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Applied Failure Analysis
Failure Analysis Report - AFA Good Report {0374, 1000}
Failure Analysis Report - AFA Good Report {0374, 1000}
Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}
Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}
Product Evaluation Report - AFA Bad Report {0374, 1000}
Product Evaluation Report - AFA Bad Report {0374, 1000}
Information Release Memo
CAT REMAN ANNOUNCES ADDITION OF COMPLETE ENGINES FOR C18 APPLICATIONS
CAT REMAN ANNOUNCES ADDITION OF COMPLETE ENGINES FOR C18 APPLICATIONS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Technical Analysis
Technical Analysis 1 (TA1) Visual Inspection for Marine Engine {0372, 1000, 7000, 753S, 7565}
Technical Analysis 1 (TA1) Visual Inspection for Marine Engine {0372, 1000, 7000, 753S, 7565}
Troubleshooting
Service Information Report
C18 Marine Engines
Welding Precaution
C18 Marine Engines
Symptom Troubleshooting
C18 Marine Engines
Timing - Calibrate
C18 Marine Engines
Acceleration Is Poor or Throttle Response Is Poor
C18 Marine Engines
Engine Misfires, Runs Rough or Is Unstable
C18 Marine Engines
Engine Vibration Is Excessive
C18 Marine Engines
Power Is Intermittently Low or Power Cutout Is Intermittent
C18 Marine Engines
Engine Stalls at Low RPM
C18 Marine Engines
Component Location
C18 Marine Engines
Engine Has Mechanical Noise (Knock)
C18 Marine Engines
General Information
C18 Marine Engines
Engine Overspeeds
C18 Marine Engines
System Overview
C18 Marine Engines
Engine Top Speed Is Not Obtained
C18 Marine Engines
Engine Cranks but Does Not Start
C18 Marine Engines
Engine Does Not Crank
C18 Marine Engines
Service Magazine
Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/25
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Process to Print Collage Schematics {0374, 1000, 7000}
Process to Print Collage Schematics {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}
A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}
A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}

Caterpillar Parts SIS Catalog C18 :

455-9998 KIT-ENGINE GASKET
455-3631 KIT-ENGINE GASKET
455-1871 KIT-ENGINE GASKET
455-1850 KIT-ENGINE GASKET
455-1741 KIT-ENGINE GASKET
455-1738 KIT-ENGINE GASKET
455-1617 KIT-ENGINE GASKET
455-1197 KIT-ENGINE GASKET
473-2334 KIT-ENGINE GASKET
491-2466 KIT-ENGINE GASKET
491-7463 KIT-ENGINE GASKET
567-4719 KIT-ENGINE GASKET
455-1185 KIT-ENGINE OVERHAUL
455-1186 KIT-ENGINE OVERHAUL
455-1188 KIT-ENGINE OVERHAUL
455-1192 KIT-ENGINE OVERHAUL

Truck sale:

Caterpillar C18, Construction
89,000 USD 
Caterpillar C18, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
Caterpillar C18, Construction
34,700 
Caterpillar C18, Construction
- mobile generator sets
MOHAMED ABDULRAHMAN AL-BAHAR
United Arab Emirates
Caterpillar C18, Construction
34,800 
Caterpillar C18, Construction
- mobile generator sets
MOHAMED ABDULRAHMAN AL-BAHAR
United Arab Emirates
Caterpillar C18, Construction
32,850 
Caterpillar C18, Construction
- mobile generator sets
MOHAMED ABDULRAHMAN AL-BAHAR
United Arab Emirates
Caterpillar C18, Construction
36,800 
Caterpillar C18, Construction
- mobile generator sets
MOHAMED ABDULRAHMAN AL-BAHAR
United Arab Emirates
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.