AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

3406E Engine Emissions Repower Tier II For D8N Tractor 1XJ00001-UP (MACHINE) BASIC ENGINE Caterpillar SIS



TRACK-TYPE TRACTOR D8N TRACK-TYPE TRACTOR 1XJ
 3406E Engine Emissions Repower Tier II For D8N Tractor 1XJ00001-UP (MACHINE) SEBP4810 D8N 1XJ   (1989)

Parts group D8N:

  For full view, you need register
BASIC ENGINE
BELT TIGHTENER GP
BELT TENSIONER GP
161-2435 BELT TENSIONER GP
161-2435 BELT TENSIONER GP
S/N 9TC1-UP; 1XJ1-UP; 5TJ1-UP
PART OF 263-5497 CONVERSION AR-ENGINE
CAMSHAFT GP
CAMSHAFT GP
185-9699 CAMSHAFT GP
185-9699 CAMSHAFT GP
S/N BET12066-UP
GEAR GP-CAMSHAFT
204-2114 GEAR GP-CAMSHAFT
204-2114 GEAR GP-CAMSHAFT
S/N BET12066-UP
ADDITIONAL BOLTS TO RETAIN PLATES IN HIGH LOAD APPLICATIONS
PART OF 137-5921 GEAR GP-FRONT
CRANKSHAFT GP
CRANKSHAFT AS
430-2593 CRANKSHAFT AS
430-2593 CRANKSHAFT AS
S/N BET12066-UP
PART OF 4N-0741 CRANKSHAFT GP
CRANKSHAFT GP
4N-0741 CRANKSHAFT GP
4N-0741 CRANKSHAFT GP
S/N BET12066-UP
Type 1
CRANKSHAFT GP
4N-0741 CRANKSHAFT GP
4N-0741 CRANKSHAFT GP
S/N BET12066-UP
Type 2
243-6718 KIT-CRANKSHAFT BEARING
243-6718 KIT-CRANKSHAFT BEARING
S/N BET12066-UP
PART OF 4N-0741 CRANKSHAFT GP
SEAL GP-CRANKSHAFT
319-0785 SEAL GP-CRANKSHAFT
319-0785 SEAL GP-CRANKSHAFT -REAR
S/N BET12066-UP
PART OF 4N-0741 CRANKSHAFT GP
FOR USE WITH CCW ROTATION
SEAL GP-CRANKSHAFT
319-7401 SEAL GP-CRANKSHAFT
319-7401 SEAL GP-CRANKSHAFT -FRONT
S/N BET12066-UP
PART OF 4N-0741 CRANKSHAFT GP
FOR USE WITH CW ROTATION
CYLINDER BLOCK GP
COVER GP-CYLINDER BLOCK
107-6737 COVER GP-CYLINDER BLOCK
107-6737 COVER GP-CYLINDER BLOCK
S/N BET12066-UP
COVER GP-CYLINDER BLOCK
170-4672 COVER GP-CYLINDER BLOCK
170-4672 COVER GP-CYLINDER BLOCK
S/N BET12066-UP
CYLINDER BLOCK GP
137-8469 CYLINDER BLOCK GP
137-8469 CYLINDER BLOCK GP
S/N BET12066-UP
FIELD REPLACEMENT FOR @@@@@146-2741@@@@@
CYLINDER BLOCK GP
146-2741 CYLINDER BLOCK GP
146-2741 CYLINDER BLOCK GP
S/N BET12066-UP
FIELD REPLACEMENT ORDER @@@@@137-8469@@@@@
CYLINDER BLOCK GP
202-1254 CYLINDER BLOCK GP
202-1254 CYLINDER BLOCK GP
S/N BET12066-UP
PART OF 137-8469 CYLINDER BLOCK GP
CYLINDER BLOCK GP
202-1261 CYLINDER BLOCK GP
202-1261 CYLINDER BLOCK GP
S/N BET12066-UP
PART OF 146-2741 CYLINDER BLOCK GP
CYLINDER HEAD GP
CYLINDER HEAD AS
223-7263 CYLINDER HEAD AS
223-7263 CYLINDER HEAD AS
S/N BET12066-UP
WITH PRE-FINISHED VALVE SEAT INSERTS
PART OF 223-9250 CYLINDER HEAD GP
CYLINDER HEAD AS
281-1640 CYLINDER HEAD AS
281-1640 CYLINDER HEAD AS
S/N BET13322-UP
PART OF 263-5055 CYLINDER HEAD GP
CYLINDER HEAD GP
223-9250 CYLINDER HEAD GP
223-9250 CYLINDER HEAD GP
S/N BET12066-13321
FOR 2300 RPM APLICATIONS FEILD REPLACEMENT 380-9100 CYLINDER HEAD IS AVALIBLE
PART OF 235-3176 CYLINDER HEAD GP
CYLINDER HEAD GP
235-3176 CYLINDER HEAD GP
235-3176 CYLINDER HEAD GP
S/N BET12066-13321
CYLINDER HEAD GP
235-3176 CYLINDER HEAD GP
235-3176 CYLINDER HEAD GP
S/N BET13222-UP
CYLINDER HEAD GP
263-5055 CYLINDER HEAD GP
263-5055 CYLINDER HEAD GP
S/N BET13322-UP
PART OF 235-3176 CYLINDER HEAD GP
PLUG GP-CYLINDER HEAD
234-5996 PLUG GP-CYLINDER HEAD
234-5996 PLUG GP-CYLINDER HEAD
S/N BET12066-UP
PLUG GP-CYLINDER HEAD
235-3175 PLUG GP-CYLINDER HEAD
235-3175 PLUG GP-CYLINDER HEAD
S/N BET12066-UP
DAMPER GP
DAMPER GP
4P-5893 DAMPER GP
4P-5893 DAMPER GP
S/N BET12066-UP
DRIVE GP-FAN
DRIVE GP-FAN
159-9429 DRIVE GP-FAN
159-9429 DRIVE GP-FAN
S/N 9TC1-UP; 1XJ1-UP; 5TJ1-UP
PART OF 263-5497 CONVERSION AR-ENGINE
MOUNTING GP-FAN DRIVE
170-4674 MOUNTING GP-FAN DRIVE
170-4674 MOUNTING GP-FAN DRIVE
S/N BET12066-UP
DRIVE GP-PUMP
ADAPTER GP-PUMP DRIVE
133-9907 ADAPTER GP-PUMP DRIVE
133-9907 ADAPTER GP-PUMP DRIVE
S/N BET12066-UP
PART OF 6I-3638 DRIVE GP-PUMP
DRIVE GP-PUMP
6I-3638 DRIVE GP-PUMP
6I-3638 DRIVE GP-PUMP
S/N BET12066-UP
SAE 2
FLYWHEEL GP
FLYWHEEL GP
159-9019 FLYWHEEL GP
159-9019 FLYWHEEL GP
S/N BET12066-UP
GEAR GP-REAR
9Y-2187 GEAR GP-REAR
9Y-2187 GEAR GP-REAR
S/N BET12066-UP
GEAR GP
GEAR GP-FRONT
137-5921 GEAR GP-FRONT
137-5921 GEAR GP-FRONT
S/N BET12066-UP
GEAR GP-REAR
9Y-2187 GEAR GP-REAR
9Y-2187 GEAR GP-REAR
S/N BET12066-UP
HOUSING GP-FLYWHEEL
COVER GP-FLYWHEEL HOUSING
1W-8341 COVER GP-FLYWHEEL HOUSING
1W-8341 COVER GP-FLYWHEEL HOUSING
S/N BET12066-UP
FOR USE WITH SAE NO. 1 FLYWHEEL HOUSING
HOUSING GP-FLYWHEEL
100-2879 HOUSING GP-FLYWHEEL
100-2879 HOUSING GP-FLYWHEEL
S/N BET12066-UP
PROVIDES HOLE FOR MAGNETIC PICKUP SENSOR
HOUSING GP-FRONT
FASTENER GP-FRONT HOUSING
150-3345 FASTENER GP-FRONT HOUSING
150-3345 FASTENER GP-FRONT HOUSING
S/N BET12066-13304
FASTENER GP-FRONT HOUSING
300-3764 FASTENER GP-FRONT HOUSING
300-3764 FASTENER GP-FRONT HOUSING
S/N BET13305-UP
FOR USE WITH ATTACHING THE STARTER GROUND WIRE TO THE 3406E ENGINE ON THE SOUND SUPPRESSED D8R SII
FASTENER GP-FRONT HOUSING
4P-6846 FASTENER GP-FRONT HOUSING
4P-6846 FASTENER GP-FRONT HOUSING
S/N BET12066-UP
GEAR GP-FRONT
137-5921 GEAR GP-FRONT
137-5921 GEAR GP-FRONT
S/N BET12066-UP
HOUSING GP-FRONT
161-8414 HOUSING GP-FRONT
161-8414 HOUSING GP-FRONT
S/N BET12066-UP
LIFTING GP-ENGINE
LIFTING GP-ENGINE
160-5569 LIFTING GP-ENGINE
160-5569 LIFTING GP-ENGINE
S/N BET12066-UP
LIFTING GP-ENGINE
200-1302 LIFTING GP-ENGINE
200-1302 LIFTING GP-ENGINE
S/N BET12066-UP
FRONT
MOUNTING GP-ALTERNATOR
MOUNTING GP-ALTERNATOR
160-0569 MOUNTING GP-ALTERNATOR
160-0569 MOUNTING GP-ALTERNATOR
S/N BET12066-UP
MOUNTING GP-ENGINE
SUPPORT GP-ENGINE
4N-2473 SUPPORT GP-ENGINE
4N-2473 SUPPORT GP-ENGINE
S/N BET12066-UP
TRUNNION GP-ENGINE
192-0542 TRUNNION GP-ENGINE
192-0542 TRUNNION GP-ENGINE
S/N BET12066-UP
PAN GP-OIL
PAN GP-OIL
107-7378 PAN GP-OIL
107-7378 PAN GP-OIL
S/N BET12066-13349
PAN GP-OIL
107-7378 PAN GP-OIL
107-7378 PAN GP-OIL
S/N BET13350-UP
PAN GP-OIL
313-3754 PAN GP-OIL
313-3754 PAN GP-OIL -ENGINE
S/N BET13350-UP
PART OF 107-7378 PAN GP-OIL
PISTON & ROD GP
PISTON & ROD GP
176-5745 PISTON & ROD GP
176-5745 PISTON & ROD GP
S/N BET12066-UP
16.25:1 COMPRESSION RATIO
SUPPRESSION GP-SOUND
COVER GP-SOUND SUPPRESSION
104-4825 COVER GP-SOUND SUPPRESSION
104-4825 COVER GP-SOUND SUPPRESSION
S/N BET12066-UP
COVER GP-SOUND SUPPRESSION
161-8400 COVER GP-SOUND SUPPRESSION
161-8400 COVER GP-SOUND SUPPRESSION
S/N BET12066-UP
PANEL GP-SOUND SUPPRESSION
162-2516 PANEL GP-SOUND SUPPRESSION
162-2516 PANEL GP-SOUND SUPPRESSION
S/N BET12066-UP
VALVE MECHANISM GP
BASE GP-VALVE COVER & INJ HARN
122-1248 BASE GP-VALVE COVER & INJ HARN
122-1248 BASE GP-VALVE COVER & INJ HARN
S/N BET12066-13335
BASE GP-VALVE COVER & INJ HARN
122-1248 BASE GP-VALVE COVER & INJ HARN
122-1248 BASE GP-VALVE COVER & INJ HARN
S/N BET13336-UP
COVER GP-VALVE MECHANISM
150-3135 COVER GP-VALVE MECHANISM
150-3135 COVER GP-VALVE MECHANISM
S/N BET12066-UP
PART OF 160-7451 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
160-7451 COVER GP-VALVE MECHANISM
160-7451 COVER GP-VALVE MECHANISM
S/N BET12066-UP
COVER GP-VALVE MECHANISM
160-7452 COVER GP-VALVE MECHANISM
160-7452 COVER GP-VALVE MECHANISM
S/N BET12066-UP
PART OF 160-7451 COVER GP-VALVE MECHANISM
MECHANISM GP-FUEL PUMP & VALVE
148-7482 MECHANISM GP-FUEL PUMP & VALVE
148-7482 MECHANISM GP-FUEL PUMP & VALVE
S/N BET12066-13216
MECHANISM GP-FUEL PUMP & VALVE
190-0009 MECHANISM GP-FUEL PUMP & VALVE
190-0009 MECHANISM GP-FUEL PUMP & VALVE
S/N BET13217-13476
MECHANISM GP-FUEL PUMP & VALVE
190-0009 MECHANISM GP-FUEL PUMP & VALVE
190-0009 MECHANISM GP-FUEL PUMP & VALVE
S/N BET13477-UP
Type 1
MECHANISM GP-FUEL PUMP & VALVE
190-0009 MECHANISM GP-FUEL PUMP & VALVE
190-0009 MECHANISM GP-FUEL PUMP & VALVE
S/N BET13477-UP
Type 2
ROCKER ARM GP
278-1929 ROCKER ARM GP
278-1929 ROCKER ARM GP
S/N BET13217-UP
PART OF 190-0009 MECHANISM GP-FUEL PUMP & VALVE
ROCKER ARM GP
278-1931 ROCKER ARM GP
278-1931 ROCKER ARM GP
S/N BET12066-13216
PART OF 148-7482 MECHANISM GP-FUEL PUMP & VALVE
ROCKER ARM GP
320-2796 ROCKER ARM GP
320-2796 ROCKER ARM GP
S/N BET13217-UP
PART OF 328-4236 ROCKER ARM GP
ROCKER ARM GP
328-4236 ROCKER ARM GP
328-4236 ROCKER ARM GP -NON-BRAKE
S/N BET13217-UP
PART OF 190-0009 MECHANISM GP-FUEL PUMP & VALVE
ROCKER ARM GP
328-4238 ROCKER ARM GP
328-4238 ROCKER ARM GP
S/N BET13217-UP
PART OF 328-4236 ROCKER ARM GP
ROCKER ARM GP
437-3862 ROCKER ARM GP
437-3862 ROCKER ARM GP
S/N BET13217-UP
PART OF 437-3865 ROCKER ARM GP
ROCKER ARM GP
437-3864 ROCKER ARM GP
437-3864 ROCKER ARM GP
S/N BET13217-UP
PART OF 437-3865 ROCKER ARM GP
437-3865 ROCKER ARM GP
437-3865 ROCKER ARM GP
S/N BET13217-UP
NON BRAKE
PART OF 190-0009 MECHANISM GP-FUEL PUMP & VALVE

Information:

(For parts list, see above)

Specifications
Air Compressor Drive
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Service Magazine
New Crankshaft Assemblies{1202,1204,1206,1207,1212}
1982/11/01
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
Repair Guidelines for Air Compressors {1803}
2003/08/25
A New Diagnostic Kit for the Evaluation of Air Compressor Operation is Introduced {1803}
2004/11/15
Specifications
Belt Tension Chart
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Belt Tighteners
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Service Magazine
New Color Used For Fan Belt Tightener Spring{1358}
1984/06/04
Improved Fan Drive Groups And Belt Tightener Group Eliminates Scheduled Periodic Lubrication {1359}
1993/10/11
Improved Fan Drive Groups and Belt Tightener Groups Need Scheduled Periodic Lubrication {1359}
1995/11/06
Systems Operation
Compression Brake
3406E and 3456 Engines for Caterpillar Built Machines
Testing and Adjusting
Control Valve (Compression Brake) - Test
3406E and 3456 Engines for Caterpillar Built Machines
Solenoid Valve (Compression Brake) - Test
3406E and 3456 Engines for Caterpillar Built Machines
Slave Piston Lash - Adjust
3406E and 3456 Engines for Caterpillar Built Machines
Disassembly and Assembly
Compression Brake - Remove - If Equipped
3406E and 3456 Engines for Caterpillar Built Machines
Compression Brake - Install - If Equipped
3406E and 3456 Engines for Caterpillar Built Machines
Compression Brake - Disassemble - If Equipped
3406E and 3456 Engines for Caterpillar Built Machines
Compression Brake - Assemble - If Equipped
3406E and 3456 Engines for Caterpillar Built Machines
Service Magazine
New Valve Lifter Improves Oil Flow To Top Of Engine{1112,1119}
1990/04/02
Tools For 346D Jake Brake {1119,1119}
1997/03/31
Special Instruction
Procedure to Torque the Camshaft Gear{1210, 1212}
Procedure to Torque the Camshaft Gear{1210, 1212}
Specifications
Camshaft
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Reuse And Salvage Guidelines
Reuse and Salvage for Camshafts {1210, 1210}
Reuse and Salvage for Camshafts {1210, 1210}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Testing and Adjusting
Excessive Bearing Wear - Inspect
3406E and 3456 Engines for Caterpillar Built Machines
Disassembly and Assembly
Camshaft
3406 VEHICULAR ENGINE FOR D8N TRACTOR
Camshaft Bearings
3406 VEHICULAR ENGINE FOR D8N TRACTOR
Camshaft - Remove
3406E and 3456 Engines for Caterpillar Built Machines
Camshaft - Install
3406E and 3456 Engines for Caterpillar Built Machines
Camshaft Bearings - Remove
3406E and 3456 Engines for Caterpillar Built Machines
Camshaft Bearings - Install
3406E and 3456 Engines for Caterpillar Built Machines
Camshaft Gear - Remove and Install
3406E and 3456 Engines for Caterpillar Built Machines
Camshaft Gear - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines
Camshaft Bearings - Remove
C11 and C13 Engines for Caterpillar Built Machines
Camshaft Bearings - Install
C11 and C13 Engines for Caterpillar Built Machines
Camshaft - Remove
C11 and C13 Engines for Caterpillar Built Machines
Camshaft - Install
C11 and C13 Engines for Caterpillar Built Machines
Service Magazine
New Crankshaft Assemblies{1202,1204,1206,1207,1212}
1982/11/01
6V4869 Adapter And 6V6174 Plug Can Be Used To Install Camshaft Bearings{1211,0621}
1982/11/22
Maximum Wear Limits Established For Camshaft Roller Followers{1209}
1985/09/30
New 8T2998 Lubricant Available{0645,1210}
1986/02/17
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Additional Information For Checking Valve Camshaft Timing{1105,1110,1112,1121}
1989/12/11
New Valve Lifter Improves Oil Flow To Top Of Engine{1112,1119}
1990/04/02
Remanufactured Camshafts And Cam Kits Available For Parts Service{1210,1211,1212}
1990/12/17
Camshaft Lobe Surface Finish Improved; Camshaft Drive Gear Installation Procedure {1209,1210,1212}
1993/09/13
Be Sure To Use Correct Camshaft Idler Gear Shaft And Bolts{1206}
1994/03/07
New Valve Lifter Assembly Provides Improved Lubrication Of Lifter Roller And Camshaft Lobes{1209,1210}
1994/06/20
New Service Repair Camshaft Idler Gear Shaft Available For Use With Cylinder Blocks With Damaged Pilot Bore{1206,1212,1237}
1995/08/21
Procedure to Torque the Camshaft Gear {1206, 1210}
2007/02/05
Cat<SUP>&reg;</SUP> Reman Has Added Valve Actuators, Valve Lifters, Rocker Arms, and Camshafts for Certain Machine Engines {1121, 1130, 1209, 1210}
2014/09/05
Quick Disconnect Coupling On Optional Modification Of 5P4150 Nozzle Tester Permits Faster Exchange Of Adapters{0651,1254}
1979/09/03
Truck Engine News
New Front Crankshaft Seals and New Rear Crankshaft Seals are Now in Production {1160, 1161}
2003/05/01
Engine News
New Front Crankshaft Seals and New Rear Crankshaft Seals are Now in Production {1160, 1161}
2003/05/01
A New Seal Sleeve Combination is Now Available for Field Repair on certain 3176, C9, C9.3, C10, C11, C12, and C13 Engines {1202}
A New Seal Sleeve Combination is Now Available for Field Repair on certain 3176, C9, C9.3, C10, C11, C12, and C13 Engines {1202}
Special Instruction
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Special Handling Information For Installation Of 2W1733 Or 2W1734 Crankshaft Seal Group{1160, 1161, 1202}
Special Handling Information For Installation Of 2W1733 Or 2W1734 Crankshaft Seal Group{1160, 1161, 1202}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Short Blocks And Crankshafts{1202, 1204, 1206}
Installation Of Short Blocks And Crankshafts{1202, 1204, 1206}
Inspection and/or Repair Procedure to Replace Broken Crankshafts in C-15, C-16, C15, 3406C, 3406E, and 3456 Engines{1202}
Inspection and/or Repair Procedure to Replace Broken Crankshafts in C-15, C-16, C15, 3406C, 3406E, and 3456 Engines{1202}
Specifications
Crankshaft (Earlier)
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Crankshaft (Later)
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Tool Operating Manual
362-4250 Deck Height Measuring Tool{1201}
362-4250 Deck Height Measuring Tool{1201}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Reuse And Salvage Guidelines
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Testing and Adjusting
Excessive Bearing Wear - Inspect
3406E and 3456 Engines for Caterpillar Built Machines
Main Bearings - Inspect
3406E and 3456 Engines for Caterpillar Built Machines
Disassembly and Assembly
Crankshaft Pulley And Vibration Damper
3406 VEHICULAR ENGINE FOR D8N TRACTOR
Crankshaft Main Bearings
3406 VEHICULAR ENGINE FOR D8N TRACTOR
Crankshaft
3406 VEHICULAR ENGINE FOR D8N TRACTOR
Crankshaft Front Seal And Wear Sleeve
3406 VEHICULAR ENGINE FOR D8N TRACTOR
Crankshaft Rear Seal And Wear Sleeve
3406 VEHICULAR ENGINE FOR D8N TRACTOR
Bearing Clearance - Check
3406E and 3456 Engines for Caterpillar Built Machines
Crankshaft Front Seal - Install
3406E and 3456 Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Remove
3406E and 3456 Engines for Caterpillar Built Machines
Crankshaft Front Seal - Remove
3406E and 3456 Engines for Caterpillar Built Machines
Crankshaft - Remove
3406E and 3456 Engines for Caterpillar Built Machines
Crankshaft - Install
3406E and 3456 Engines for Caterpillar Built Machines
Crankshaft Rear Seal - Remove
3406E and 3456 Engines for Caterpillar Built Machines
Crankshaft Rear Seal - Install
3406E and 3456 Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Install
3406E and 3456 Engines for Caterpillar Built Machines
Crankshaft Gear - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Remove
C11 and C13 Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Install
C11 and C13 Engines for Caterpillar Built Machines
Crankshaft - Remove
C11 and C13 Engines for Caterpillar Built Machines
Crankshaft Rear Seal - Remove
C11 and C13 Engines for Caterpillar Built Machines
Crankshaft Rear Seal - Install
C11 and C13 Engines for Caterpillar Built Machines
Crankshaft Front Seal - Remove
C11 and C13 Engines for Caterpillar Built Machines
Crankshaft Front Seal - Install
C11 and C13 Engines for Caterpillar Built Machines
Crankshaft - Install
C11 and C13 Engines for Caterpillar Built Machines
Service Magazine
6V2086 And 6V2087 Seal And Wear Sleeve Installers Available{0622,1160,1161}
1980/09/01
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Use 6V6035 Hardness Tester On Crankshafts{0651,1202}
1982/02/22
Use Correct Part Numbers For Main And Connecting Rod Bearings{1230,1203,1219}
1982/04/12
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
New Crankshaft Assemblies{1202,1204,1206,1207,1212}
1982/11/01
6V6142 And 6V6143 Installers Can Be Used To Install Crankshaft Seals And Wear Sleeves{0622,0626,1160,1161}
1982/11/01
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
New Connecting Rod And Main Bearings Used{1203,1219,1226,1227,1230}
1983/10/10
Crankshaft Failures{1202,1230}
1983/11/21
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Remanufactured Undersize Crankshafts Are Available{1202}
1983/11/21
Install Crankshaft Thrust Bearings Correctly To Avoid Damage{1202,1203}
1985/02/11
New Crankshaft Seal Groups Used On More 3400 Series Engines{1160,1161}
1985/03/11
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
Remanufactured Crankshafts Are Available In Standard And Two Undersize Dimensions (U.S. and Canada){1202,7754}
1985/11/18
Crankshaft Seal Usage On 3400 Series Engines{1160,1161}
1985/12/16
Service Reminders For 3400 Family Of Diesel Engines{1204,1214,1331}
1986/05/05
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Improved Main And Connecting Rod Bearings Have Aluminum Alloy With More Strength{1230}
1977/01/17
Tools To Remove Wear Sleeves From Crankshafts{0621,7558}
1977/04/18
Tools To Install Crankshaft Seal And Wear Sleeve{1160,1161,0622}
1977/07/11
Some Wobble Is Acceptable In Rubber Vibration Dampers For Crankshafts{1205}
1977/10/31
Crankshaft Support Groups Are Available To Measure Bent Crankshafts{0653,1202}
1977/11/07
Main And Connecting Rod Bearing Part Numbers {1203,1219,1230}
1987/01/26
Mid-Life Bearing Maintenance Recommendations {1203}
1987/09/14
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
New Bronze Thrust Plate Used On Center Main Bearing Of Crankshaft Groups{1203}
1990/12/17
Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts{1202}
1991/01/07
New Crankshaft Seal Groups Provide Increased Protection From Dirt And Dust{1160,1161}
1991/07/08
New 3406 (11N) Machine Engine Uses Different Components Than 3406 (70V) Machine Engine{1202,1218,1219}
1992/06/15
Oil Holes In Crankshaft Main And Rod Journals{1202}
1992/11/09
Damper Requirements For Remanufactured Short Blocks{1205}
1993/08/16
New Engine Crankshaft Rubber Damper Assembly Uses Improved Rubber Material{1205}
1994/10/03
Wear Sleeve Removal Tooling May &quot;Mark&quot; The Crankshaft{1202,1161}
1995/08/14
Recommendations For Inspection And Replacement Of Rubber and Viscous Crankshaft Dampers{1205}
1995/08/21
Points To Remember When Replacing A Viscous Crankshaft Damper Assembly With A Rubber Crankshaft Damper Assembly {1205}
1997/01/27
Use the 171-7212 Wear Sleeve to Repair the Crankshaft Hub {1160}
2011/09/20
New Front Crankshaft Seals and New Rear Crankshaft Seals are Now in Production {1160, 1161}
2006/06/26
A New Type of Main Bearing is Available {1202, 1203}
2010/12/23
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16
Inspection and/or Repair Procedure to Replace Crankshafts on Machine Engines {1202}
2009/10/29
Use Reuse and Salvage Guidelines for Measurements of Crankshafts {1202}
2006/10/09
Procedure for Crankshafts that will not Rotate after Installation during a Rebuild {1000, 1202}
2008/09/08
A New Seal Sleeve Combination is Now Available for Field Repair on certain 3176, C9, C9.3, C10, C11, C12, and C13 Machine Engines {1202}
A New Seal Sleeve Combination is Now Available for Field Repair on certain 3176, C9, C9.3, C10, C11, C12, and C13 Machine Engines {1202}
Truck Engine News
The Cylinder Liners Have a New Appearance {1216}
2005/03/01
Special Instruction
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
INSTALLATION OF 7N628 GASKET SERVICE GROUP{1101, 1221}
INSTALLATION OF 7N628 GASKET SERVICE GROUP{1101, 1221}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Installation Of 2W3815 Or 5N93 Inserts{1217}
Installation Of 2W3815 Or 5N93 Inserts{1217}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Installation Of Short Blocks And Crankshafts{1202, 1204, 1206}
Installation Of Short Blocks And Crankshafts{1202, 1204, 1206}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Installation Instructions For The 160-9874 Gasket Kit {1213, 7555}
Installation Instructions For The 160-9874 Gasket Kit {1213, 7555}
Installation of the 3406B and 3406C Long Block Engines
Installation of the 3406B and 3406C Long Block Engines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Visual Inspection of Liner Seats for 3400, C15, C16, and C18 Series Engines{1200}
Visual Inspection of Liner Seats for 3400, C15, C16, and C18 Series Engines{1200}
Service Letter-NACD
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Australia
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-CFEL
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-CSARL
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Americas
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Brazil
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Truck/Ag/Marine
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Technical Information Bulletin
0R-3711, 0R-3714, 0R-3751, 0R-3752 Remanufactured Long Blocks
0R-3711, 0R-3714, 0R-3751, 0R-3752 Remanufactured Long Blocks
Specifications
Cylinder Block
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Idler Gear Shaft Pilot Bore
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Cylinder Liners
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Cylinder Liner Projection
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Bearings For Connecting Rods And Mains
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Tool Operating Manual
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
362-4250 Deck Height Measuring Tool{1201}
362-4250 Deck Height Measuring Tool{1201}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Service Letter-China
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Asia
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3114, 3116, and 3126 Engine Series Cylinder Blocks {1201}
Reuse and Salvage for 3114, 3116, and 3126 Engine Series Cylinder Blocks {1201}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Service Letter-APD
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Testing and Adjusting
Cylinder Block - Inspect
3406E and 3456 Engines for Caterpillar Built Machines
Excessive Bearing Wear - Inspect
3406E and 3456 Engines for Caterpillar Built Machines
Main Bearings - Inspect
3406E and 3456 Engines for Caterpillar Built Machines
Cylinder Liner Projection - Inspect
3406E and 3456 Engines for Caterpillar Built Machines
Disassembly and Assembly
Spacer Plate
3406 VEHICULAR ENGINE FOR D8N TRACTOR
Piston Cooling Tubes
3406 VEHICULAR ENGINE FOR D8N TRACTOR
Crankshaft Main Bearings
3406 VEHICULAR ENGINE FOR D8N TRACTOR
Camshaft Bearings
3406 VEHICULAR ENGINE FOR D8N TRACTOR
Cylinder Liners
3406 VEHICULAR ENGINE FOR D8N TRACTOR
Bearing Clearance - Check
3406E and 3456 Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Remove
3406E and 3456 Engines for Caterpillar Built Machines
Cylinder Liner - Remove
3406E and 3456 Engines for Caterpillar Built Machines
Piston Cooling Jets - Remove and Install
3406E and 3456 Engines for Caterpillar Built Machines
Camshaft Bearings - Remove
3406E and 3456 Engines for Caterpillar Built Machines
Camshaft Bearings - Install
3406E and 3456 Engines for Caterpillar Built Machines
Cylinder Liner - Install
3406E and 3456 Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Install
3406E and 3456 Engines for Caterpillar Built Machines
Piston Cooling Jets - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines
Cylinder Liner - Remove
C11 and C13 Engines for Caterpillar Built Machines
Cylinder Liner - Install
C11 and C13 Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Remove
C11 and C13 Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Install
C11 and C13 Engines for Caterpillar Built Machines
Camshaft Bearings - Remove
C11 and C13 Engines for Caterpillar Built Machines
Camshaft Bearings - Install
C11 and C13 Engines for Caterpillar Built Machines
Service Magazine
Remanufactured Short Blocks Are Available For Repairs Of Early 3406 Engines{1201,1101,1102}
1980/03/31
Remove Piston Cooling Tubes Before Removal Of Pistons And Connecting Rods{1214,1218,1201,1225,1307}
1981/07/13
New Cylinder Liners And O-Ring Seals Give Longer Seal Life{1216,1201,1213,1227}
1981/12/14
Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21
Use Correct Part Numbers For Main And Connecting Rod Bearings{1230,1203,1219}
1982/04/12
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
6V4869 Adapter And 6V6174 Plug Can Be Used To Install Camshaft Bearings{1211,0621}
1982/11/22
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Dimensions For Reconditioning Cylinder Blocks, Cylinder Heads{1201,1101,1103,1105}
1982/12/20
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
New Liner Seat Insert Available{1217}
1983/08/15
New Connecting Rod And Main Bearings Used{1203,1219,1226,1227,1230}
1983/10/10
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Dimensions For Reconditioning Cylinder Blocks, Cylinder Heads{1201,1101,1103,1105}
1984/04/23
New Cylinder Block Groups Used{1201}
1984/10/01
Install Crankshaft Thrust Bearings Correctly To Avoid Damage{1202,1203}
1985/02/11
Use Care When Handling Water Seals For Cylinder Head Spacer Plates{1115}
1985/07/15
New Cylinder Liner Available{1201}
1986/02/10
Service Reminders For 3400 Family Of Diesel Engines{1204,1214,1331}
1986/05/05
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Indications Of Engine Overspeeding When Only One Cam Lobe/Lifter Has Failed{1000,1100,1200}
1986/09/08
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Modification To Holder To Machine Counterbore On Cylinder Block{0664,1201}
1977/02/28
Main And Connecting Rod Bearing Part Numbers {1203,1219,1230}
1987/01/26
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Recommendations For Preventing Cooling System Damage {1201}
1987/08/31
Mid-Life Bearing Maintenance Recommendations {1203}
1987/09/14
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
New Information On Reusable Cylinder Liners{1216}
1978/06/19
New One-Piece Flywheel Housing Gasket{1157,1201}
1978/07/03
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Improved Head Gasket Used; Summary Of Earlier Gaskets And Service Tips{1124,1216,1221}
1989/08/21
Improved Head Gasket Used; Service Tips {1124,1216,1221,7568}
1990/02/26
Service Tips For Piston Cooling Jets (Tubes){1331}
1990/11/26
Remanufactured Camshafts And Cam Kits Available For Parts Service{1210,1211,1212}
1990/12/17
New Bronze Thrust Plate Used On Center Main Bearing Of Crankshaft Groups{1203}
1990/12/17
Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts{1202}
1991/01/07
Cylinder Kits Not Recommended For Use In 3400 Family of Marine Engines And D8N Tractors{1214}
1991/05/20
Procedure To Retain Oil Pump When Pump Mounting Pad On Cylinder Block Is Broken{1201,1304}
1991/05/20
No Gaskets Used With Aluminum Flywheel Housings{1157}
1991/10/14
New Cylinder Kits Available{1213}
1992/04/13
Thinner Spacer Plates Available For Parts Service{1221}
1992/06/29
Be Sure The Fuel Injection Pump Housing Is Compatible With 0R0715 And 0R2545 Remanufactured Short Blocks{1201,1253}
1992/08/31
New Liner Seat Inserts Available{1217}
1992/11/09
Cylinder Pack Puller Groups Improved {0705,1239}
1993/01/18
Damper Requirements For Remanufactured Short Blocks{1205}
1993/08/16
Additional Parts Required For Remanufactured Short Block{1200}
1993/09/27
New Cylinder Head Gasket, Spacer Plate And Head Bolts Used; New Cylinder Liner Projection Measurement Method; New Cylinder Head Torque Sequence; Improved Coolant Flow (Cylinder Heads) {1124,1221,1216,1101}
1994/07/04
Be Sure Correct Piston Cooling Jets Are Installed{1331}
1994/11/28
New Service Repair Camshaft Idler Gear Shaft Available For Use With Cylinder Blocks With Damaged Pilot Bore{1206,1212,1237}
1995/08/21
New Material Used In O-Rings And Optional New Block Side Cover Replacement{1201}
1996/02/19
Procedure For Installing Steel Core Gasket At The Front Housing And The Flywheel Housing {1151,1157,1162}
1996/11/25
Damaged Lifter Bores In 3400 Series Engines Can Be Used Again {1201}
2005/01/24
The Cylinder Liners Have a New Appearance {1216}
2005/03/14
Cylinder Pack Upgrade Is Available for Certain 3406B and 3406C Machine Engines When Replacing All Six Cylinders Packs {1201, 1225}
2006/03/20
A New Piston Cooling Jet Assembly Has Been Released {1331}
2006/06/19
Special Instruction
Installation of 0R1160, 0R1161 and 0R1248 Remanufactured Cylinder Head Groups{1100}
Installation of 0R1160, 0R1161 and 0R1248 Remanufactured Cylinder Head Groups{1100}
3400 Cylinder Head To Block Joint Repair Procedure{1124}
3400 Cylinder Head To Block Joint Repair Procedure{1124}
INSTALLATION OF 7N628 GASKET SERVICE GROUP{1101, 1221}
INSTALLATION OF 7N628 GASKET SERVICE GROUP{1101, 1221}
Use Of The 5P7333 Tool Group For Bridge Dowel Repair{1101}
Use Of The 5P7333 Tool Group For Bridge Dowel Repair{1101}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Installation Of 2W3815 Or 5N93 Inserts{1217}
Installation Of 2W3815 Or 5N93 Inserts{1217}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Oversized Injector Sleeves for Remanufactured Cylinder Heads On Medium Sized Engines{1100, 1101, 1125}
Oversized Injector Sleeves for Remanufactured Cylinder Heads On Medium Sized Engines{1100, 1101, 1125}
Rocker Valley Inserts Are Now Used in Remanufactured Cylinder Heads{1100, 1102}
Rocker Valley Inserts Are Now Used in Remanufactured Cylinder Heads{1100, 1102}
Service Letter-NACD
Product Support Program For Replacing Failed Cylinder Head Gaskets On Certain D8L, D8N, D9N, And D10N Tractors; 16G Motor Graders; D35HP, D40D, D400, And D400D Articulated Dump Trucks; 245, And 245B Excavators; 589 Pipelayers; 621E, 623E, 627E, 631E, 637E, 651E, And 657E Wheel Tractors; 657E Scrapers; 768C And 772B Tractors; 769C And 773B Trucks; 824C And 834B Wheel Tractors; 825C Compactors; 826C Landfill Compactors; And 980C, 988B, And 992C Wheel Loaders
Product Support Program For Replacing Failed Cylinder Head Gaskets On Certain D8L, D8N, D9N, And D10N Tractors; 16G Motor Graders; D35HP, D40D, D400, And D400D Articulated Dump Trucks; 245, And 245B Excavators; 589 Pipelayers; 621E, 623E, 627E, 631E, 637E, 651E, And 657E Wheel Tractors; 657E Scrapers; 768C And 772B Tractors; 769C And 773B Trucks; 824C And 834B Wheel Tractors; 825C Compactors; 826C Landfill Compactors; And 980C, 988B, And 992C Wheel Loaders
Service Letter-Australia
Product Support Program For Replacing Failed Cylinder Head Gaskets On Certain D8L, D8N, D9N, And D10N Tractors; 16G Motor Graders; D35HP, D40D, D400, And D400D Articulated Dump Trucks; 245, And 245B Excavators; 589 Pipelayers; 621E 623E, 627E, 631E, 637E, 651E, And 657E Wheel Tractors; 657E Scrapers; 768C And 772B Tractors; 769C And 773B Trucks; 824C And 834C Wheel Tractors; 825C Compactors; 826C Landfill Compactors; And 980C, 988B, And 992C Wheel Loaders
Product Support Program For Replacing Failed Cylinder Head Gaskets On Certain D8L, D8N, D9N, And D10N Tractors; 16G Motor Graders; D35HP, D40D, D400, And D400D Articulated Dump Trucks; 245, And 245B Excavators; 589 Pipelayers; 621E 623E, 627E, 631E, 637E, 651E, And 657E Wheel Tractors; 657E Scrapers; 768C And 772B Tractors; 769C And 773B Trucks; 824C And 834C Wheel Tractors; 825C Compactors; 826C Landfill Compactors; And 980C, 988B, And 992C Wheel Loaders
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Specifications
Valves
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Intake Valve Timing
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Cylinder Head
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Tool Operating Manual
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
Service Letter-China
Product Support Program For Replacing Failed Cylinder Head Gaskets On Certain D8L, D8N, D9N, And D10N Tractors; 16G Motor Graders; D35HP, D40D, D400, And D400D Articulated Dump Trucks; 245, And 245B Excavators; 589 Pipelayers; 621E 623E, 627E, 631E, 637E, 651E, And 657E Wheel Tractors; 657E Scrapers; 768C And 772B Tractors; 769C And 773B Trucks; 824C And 834C Wheel Tractors; 825C Compactors; 826C Landfill Compactors; And 980C, 988B, And 992C Wheel Loaders
Product Support Program For Replacing Failed Cylinder Head Gaskets On Certain D8L, D8N, D9N, And D10N Tractors; 16G Motor Graders; D35HP, D40D, D400, And D400D Articulated Dump Trucks; 245, And 245B Excavators; 589 Pipelayers; 621E 623E, 627E, 631E, 637E, 651E, And 657E Wheel Tractors; 657E Scrapers; 768C And 772B Tractors; 769C And 773B Trucks; 824C And 834C Wheel Tractors; 825C Compactors; 826C Landfill Compactors; And 980C, 988B, And 992C Wheel Loaders
Service Letter-Asia
Reuse And Salvage Guidelines
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Applied Failure Analysis
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Letter-APD
Product Support Program For Replacing Failed Cylinder Head Gaskets On Certain D8L, D8N, D9N, And D10N Tractors; 16G Motor Graders; D35HP, D40D, D400, And D400D Articulated Dump Trucks; 245, And 245B Excavators; 589 Pipelayers; 621E 623E, 627E, 631E, 637E, 651E, And 657E Wheel Tractors; 657E Scrapers; 768C And 772B Tractors; 769C And 773B Trucks; 824C And 834C Wheel Tractors; 825C Compactors; 826C Landfill Compactors; And 980C, 988B, And 992C Wheel Loaders
Product Support Program For Replacing Failed Cylinder Head Gaskets On Certain D8L, D8N, D9N, And D10N Tractors; 16G Motor Graders; D35HP, D40D, D400, And D400D Articulated Dump Trucks; 245, And 245B Excavators; 589 Pipelayers; 621E 623E, 627E, 631E, 637E, 651E, And 657E Wheel Tractors; 657E Scrapers; 768C And 772B Tractors; 769C And 773B Trucks; 824C And 834C Wheel Tractors; 825C Compactors; 826C Landfill Compactors; And 980C, 988B, And 992C Wheel Loaders
Testing and Adjusting
Engine Valve Lash - Inspect/Adjust
3406E and 3456 Engines for Caterpillar Built Machines
Disassembly and Assembly
Fuel Valve Adapters
3406 VEHICULAR ENGINE FOR D8N TRACTOR
Valve Covers
3406 VEHICULAR ENGINE FOR D8N TRACTOR
Fuel Injection Nozzles And Adapters
3406 VEHICULAR ENGINE FOR D8N TRACTOR
Cylinder Head Assembly
3406 VEHICULAR ENGINE FOR D8N TRACTOR
Valves
3406 VEHICULAR ENGINE FOR D8N TRACTOR
Valve Seat Inserts
3406 VEHICULAR ENGINE FOR D8N TRACTOR
Bridge Dowels
3406 VEHICULAR ENGINE FOR D8N TRACTOR
Valve Guides
3406 VEHICULAR ENGINE FOR D8N TRACTOR
Electronic Unit Injector Sleeve - Install
3406E and 3456 Engines for Caterpillar Built Machines
Electronic Unit Injector Sleeve - Remove
3406E and 3456 Engines for Caterpillar Built Machines
Camshaft Bearings - Remove
3406E and 3456 Engines for Caterpillar Built Machines
Camshaft Bearings - Install
3406E and 3456 Engines for Caterpillar Built Machines
Cylinder Head - Remove
3406E and 3456 Engines for Caterpillar Built Machines
Cylinder Head - Install
3406E and 3456 Engines for Caterpillar Built Machines
Inlet and Exhaust Valve Guides - Remove and Install
3406E and 3456 Engines for Caterpillar Built Machines
Inlet and Exhaust Valves - Remove and Install
3406E and 3456 Engines for Caterpillar Built Machines
Inlet and Exhaust Valve Seat Inserts - Remove and Install
3406E and 3456 Engines for Caterpillar Built Machines
Inlet and Exhaust Valve Springs - Remove and Install
3406E and 3456 Engines for Caterpillar Built Machines
Rocker Arm and Shaft - Install
3406E and 3456 Engines for Caterpillar Built Machines
Rocker Arm and Shaft - Remove
3406E and 3456 Engines for Caterpillar Built Machines
Inlet and Exhaust Valve Seat Inserts - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines
Inlet and Exhaust Valve Guides - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines
Electronic Unit Injector Sleeve - Remove
C11 and C13 Engines for Caterpillar Built Machines
Electronic Unit Injector Sleeve - Install
C11 and C13 Engines for Caterpillar Built Machines
Inlet and Exhaust Valves - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines
Inlet and Exhaust Valve Springs - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines
Camshaft Bearings - Remove
C11 and C13 Engines for Caterpillar Built Machines
Camshaft Bearings - Install
C11 and C13 Engines for Caterpillar Built Machines
Cylinder Head - Remove
C11 and C13 Engines for Caterpillar Built Machines
Cylinder Head - Install
C11 and C13 Engines for Caterpillar Built Machines
Service Magazine
Remanufactured Short Blocks Are Available For Repairs Of Early 3406 Engines{1201,1101,1102}
1980/03/31
Reconditioning of Bridge Wear Seat Is Permitted; Will Prevent Bridge Replacement When Not Necessary{1100}
1982/03/08
Vacuum Tester Checks For Leaks Between Valve Face and Seat{0651,1103,1105}
1982/09/06
Improved Inlet And Exhaust Valves{1105}
1982/09/06
Fuel In The Cooling System Or Coolant In The Engine Oil Can Result From Cracked Fuel Nozzle Adapter{1106}
1982/10/18
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Dimensions For Reconditioning Cylinder Blocks, Cylinder Heads{1201,1101,1103,1105}
1982/12/20
Engine Valve Stem &quot;Use Again&quot; Specifications{0653,1105}
1983/02/28
New Liner Seat Insert Available{1217}
1983/08/15
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
New Cylinder Head Assembly Made With A Different Material {1101}
1984/02/06
Dimensions For Reconditioning Cylinder Blocks, Cylinder Heads{1201,1101,1103,1105}
1984/04/23
Surface Grinding Of Compacted Graphite Iron Cylinder Heads{1101}
1984/07/02
New Inlet Valve Used{1105}
1984/09/03
New High Alloy Material Is Used In Cylinder Head Assemblies{1101}
1984/10/15
New Cylinder Heads, Fuel Nozzles And Fuel Nozzle Adapters Used{1101,1106}
1984/10/29
Remanufactured Cylinder Head Groups{1100,1101,7554}
1984/11/19
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Use Care When Handling Water Seals For Cylinder Head Spacer Plates{1115}
1985/07/15
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07
Indications Of Engine Overspeeding When Only One Cam Lobe/Lifter Has Failed{1000,1100,1200}
1986/09/08
Improved Exhaust Valve Now Available{1105}
1977/02/28
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Tools Now Available To Ream And/Or Hone 0.500&quot; (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Salvage Of Cylinder Heads By Using Oversized Valve Guides And Valve Inserts {1104,1103}
1987/03/30
Silicone Rubber Water Seals Available{1100}
1987/07/06
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Improved Head Gasket Used; Summary Of Earlier Gaskets And Service Tips{1124,1216,1221}
1989/08/21
Additional Information For Checking Valve Camshaft Timing{1105,1110,1112,1121}
1989/12/11
Improved Head Gasket Used; Service Tips {1124,1216,1221,7568}
1990/02/26
Reconditioning Of Bridge Wear Seat Is Permitted; Will Prevent Bridge Replacement When Not Necessary{1121}
1990/04/30
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
Camshaft Lobe Surface Finish Improved; Camshaft Drive Gear Installation Procedure {1209,1210,1212}
1993/09/13
Cylinder Head Gaskets Improved To Provide Better Fire Ring Retention{1124}
1994/02/07
Identification Of Intake And Exhaust Valves That May Be Used In Remanufactured Direct Injected 3400 Cylinder Heads{1105}
1994/04/04
New Intake And Exhaust Valves Used{1105,1100}
1994/06/20
New Rocker Arm Adjustment Screw Used To Adjust Valve Clearance{1123,1100}
1994/06/20
New Cylinder Head Gasket, Spacer Plate And Head Bolts Used; New Cylinder Liner Projection Measurement Method; New Cylinder Head Torque Sequence; Improved Coolant Flow (Cylinder Heads) {1124,1221,1216,1101}
1994/07/04
Remanufactured 3400 Cylinder Heads Now Use Intake And Exhaust Valves With Chrome Plated Valve Stems{1105}
1994/09/05
New Water Seals Used In Cylinder Head Assemblies{1124}
1994/09/05
New Inlet And Exhaust Valves Have Thinner Heads{1105}
1995/02/20
New And Reconditioned Valve Projection Specifications{1105}
1995/08/28
New Stronger Cylinder Head Bolts Used {1100}
1996/05/13
Torque Check Necessary For Front Support Bracket Bolts When Damper And Pulley Are Removed {1153}
1996/05/13
124-9057 Guide (Swirl) Collar Quickly Installs Valve Guides To Proper Height{1104,0701}
1996/12/09
Caterpillar Warranty Claims on Cylinder Head Valves {1105}
2005/10/03
Clearly Mark all of the Cracks on the Cylinder Head {1101, 7754}
2006/04/10
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Testing and Adjusting
Vibration Damper - Check
3406E and 3456 Engines for Caterpillar Built Machines
Disassembly and Assembly
Crankshaft Pulley And Vibration Damper
3406 VEHICULAR ENGINE FOR D8N TRACTOR
Vibration Damper and Pulley - Remove and Install
3406E and 3456 Engines for Caterpillar Built Machines
Vibration Damper and Pulley - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines
Service Magazine
Some Wobble Is Acceptable In Rubber Vibration Dampers For Crankshafts{1205}
1977/10/31
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut {0601}
1988/01/25
Damper Requirements For Remanufactured Short Blocks{1205}
1993/08/16
New Engine Crankshaft Rubber Damper Assembly Uses Improved Rubber Material{1205}
1994/10/03
Recommendations For Inspection And Replacement Of Rubber and Viscous Crankshaft Dampers{1205}
1995/08/21
Torque Check Necessary For Front Support Bracket Bolts When Damper And Pulley Are Removed {1153}
1996/05/13
Points To Remember When Replacing A Viscous Crankshaft Damper Assembly With A Rubber Crankshaft Damper Assembly {1205}
1997/01/27
Specifications
Accessory Drive Group (245 &amp; 245B Excavators, 16G Motor Grader, 824C Tractor, 825C &amp; 826C Compactors, 980C Wheel Loader)
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Air Compressor Drive
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Disassembly and Assembly
Accessory Drive - Remove
C11 and C13 Engines for Caterpillar Built Machines
Accessory Drive - Install
C11 and C13 Engines for Caterpillar Built Machines
Service Magazine
New Crankshaft Assemblies{1202,1204,1206,1207,1212}
1982/11/01
Specifications
Fan Drive
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Alternator and Fan Support
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Belt Tension Chart
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Belt Tighteners
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Disassembly and Assembly
Fan Drive
3406 VEHICULAR ENGINE FOR D8N TRACTOR
Fan Drive - Disassemble
3406E and 3456 Engines for Caterpillar Built Machines
Fan Drive - Assemble
3406E and 3456 Engines for Caterpillar Built Machines
Fan Drive - Remove
3406E and 3456 Engines for Caterpillar Built Machines
Fan Drive - Install
3406E and 3456 Engines for Caterpillar Built Machines
Fan Drive Mounting Group - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines
Service Magazine
New Color Used For Fan Belt Tightener Spring{1358}
1984/06/04
Improved Fan Drive Groups And Belt Tightener Group Eliminates Scheduled Periodic Lubrication {1359}
1993/10/11
Improved Fan Drive Groups and Belt Tightener Groups Need Scheduled Periodic Lubrication {1359}
1995/11/06
New Lubricant for the Fan Drive {0645, 1359}
2007/05/14
Special Instruction
Installation of Water Pump Seal Group{1361}
Installation of Water Pump Seal Group{1361}
Using A 4P2152, 1025941, 0R2856 Or 0R3790 Water Pump With A 4P2383 Inlet Adapter{1361, 1364}
Using A 4P2152, 1025941, 0R2856 Or 0R3790 Water Pump With A 4P2383 Inlet Adapter{1361, 1364}
Using A 9Y3778 Water Pump Impeller With A 9Y5652 Inlet Adapter{1361, 1364}
Using A 9Y3778 Water Pump Impeller With A 9Y5652 Inlet Adapter{1361, 1364}
Service Letter-NACD
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Service Letter-China
Service Letter-Asia
Service Letter-APD
Service Magazine
New Water Pump Has Improved Seal{1361}
1983/02/14
Use Vacuum Tester For Quality Control Check Of Water Pump Seal{0652,1361}
1983/02/28
New, Corrosion Resistant Water Pump Shaft Available{1389,1361}
1985/08/05
New Retainer And Improved Housing Keep Water Pump Bearing Tight; Repair For Loosened Bearing{1361}
1977/04/11
Replacement Seal Group For Water Pump Impeller Now Has All The Seal Parts Plus An Installation Tool{1361,0622}
1978/02/13
Improvements Made To Water Pumps; New Groups/Parts Available For Certain Applications{1364,1361}
1990/02/19
New Water Pump Groups Use Tapered Roller Bearing {1361}
1993/07/05
New Cast Iron Inlet Adapter And Impeller For Water Pumps {1361}
1993/07/05
New Components Used In Governor And Fuel Pump Drive Group{1288}
1996/02/12
Use 125-9622 Seal Installer To Install 118-9163 Seal In Water Pumps{1361,0708}
1997/01/13
Special Instruction
Installation of Water Pump Seal Group{1361}
Installation of Water Pump Seal Group{1361}
Using A 4P2152, 1025941, 0R2856 Or 0R3790 Water Pump With A 4P2383 Inlet Adapter{1361, 1364}
Using A 4P2152, 1025941, 0R2856 Or 0R3790 Water Pump With A 4P2383 Inlet Adapter{1361, 1364}
Using A 9Y3778 Water Pump Impeller With A 9Y5652 Inlet Adapter{1361, 1364}
Using A 9Y3778 Water Pump Impeller With A 9Y5652 Inlet Adapter{1361, 1364}
Service Letter-NACD
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Service Letter-China
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Water Pump
3406 VEHICULAR ENGINE FOR D8N TRACTOR
Service Magazine
New Water Pump Has Improved Seal{1361}
1983/02/14
Use Vacuum Tester For Quality Control Check Of Water Pump Seal{0652,1361}
1983/02/28
New, Corrosion Resistant Water Pump Shaft Available{1389,1361}
1985/08/05
New Retainer And Improved Housing Keep Water Pump Bearing Tight; Repair For Loosened Bearing{1361}
1977/04/11
Replacement Seal Group For Water Pump Impeller Now Has All The Seal Parts Plus An Installation Tool{1361,0622}
1978/02/13
Improvements Made To Water Pumps; New Groups/Parts Available For Certain Applications{1364,1361}
1990/02/19
New Coolant Flow Switch Group Has Improved Design To Provide Extended Service Life {1361,7422,7470}
1990/05/28
Two New Coolant Flow Switches Used On Machines Equipped With Electronic Monitoring System (EMS){1361,7422,7470}
1990/09/24
New Water Pump Groups Use Tapered Roller Bearing {1361}
1993/07/05
New Cast Iron Inlet Adapter And Impeller For Water Pumps {1361}
1993/07/05
Jacket Water Pumps Now Include New Tapered Roller Bearings {1361}
1995/03/06
Improved Water Pump Groups Available{1361}
1996/09/30
Use 125-9622 Seal Installer To Install 118-9163 Seal In Water Pumps{1361,0708}
1997/01/13
Special Instruction
Troubleshooting Engine Vibration In Vehicular Equipment{1000}
Troubleshooting Engine Vibration In Vehicular Equipment{1000}
Instructions For 3406 DI Engine Tune-Up{1000}
Instructions For 3406 DI Engine Tune-Up{1000}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Installation of a 3406 Engine Emissions Upgrade Group Retrofit for a D8N Track-Type Tractor {1000, 7000}
Installation of a 3406 Engine Emissions Upgrade Group Retrofit for a D8N Track-Type Tractor {1000, 7000}
Tier III Level Emissions Engine Repower for a D8N Track-Type Tractor {1000}
Tier III Level Emissions Engine Repower for a D8N Track-Type Tractor {1000}
Oil and Your Engine {1000}
Oil and Your Engine {1000}
Service Magazine
Real Value Available Through Caterpillar Remanufacturing Programs{0374}
1980/02/04
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Separate Valve Stem Gauges Available{0653,1000}
1982/06/07
Analyzing A Major Engine Failure{1000}
1982/07/19
Added Methods To Decrease The Effects Of High Sulfur Fuels{1355,1280,1318,1000}
1982/08/30
Reference Chart for Engine Improvements{0374,1000}
1982/10/25
New Color Used For Fan Belt Tightener Spring{1358}
1984/06/04
New Index Lists Engine Special Instructions By SMCS Code{1000,0374}
1986/04/07
Indications Of Engine Overspeeding When Only One Cam Lobe/Lifter Has Failed{1000,1100,1200}
1986/09/08
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Testing The Starter On The Engine{1401,1450}
1987/05/04
The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Microfiche For Replacement Engine Bills Of Material {0374,1000}
1987/10/26
Explanation Of Nomenclature Used In Engine Performance{1000,0374}
1978/05/15
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
New Engine Oil Coolers Have Rubber End Sheets {1378}
1988/01/25
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
Check The Radiator Fan Spider Assembly When Doing Yearly General Maintenance{1356}
1989/07/24
Engine Coolant Can Be Recycled{1395}
1989/11/13
Integral Connector Now Used On The Air Conditioning Condenser Fan Motor Relay Assembly{1408,7320}
1996/04/29
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Reuse And Salvage Guidelines
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Special Instruction
Installation Of Service Flywheel Groups For 3406, 3408 And 3412 Engines{1156}
Installation Of Service Flywheel Groups For 3406, 3408 And 3412 Engines{1156}
Installation Of Short Blocks And Crankshafts{1202, 1204, 1206}
Installation Of Short Blocks And Crankshafts{1202, 1204, 1206}
Service Letter-NACD
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Specifications
Rear Gear Group (D8N)
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Flywheel Housing
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Flywheel Housing Bore
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Flywheel Housing Runout
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Flywheel Runout
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Flywheel
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Service Letter-China
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse and Salvage for Flywheel Assemblies {1156}
Reuse and Salvage for Flywheel Assemblies {1156}
Service Letter-APD
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Testing and Adjusting
Flywheel - Inspect
3406E and 3456 Engines for Caterpillar Built Machines
Disassembly and Assembly
Flywheel Housing
3406 VEHICULAR ENGINE FOR D8N TRACTOR
Flywheel
3406 VEHICULAR ENGINE FOR D8N TRACTOR
Flywheel - Remove
3406E and 3456 Engines for Caterpillar Built Machines
Flywheel - Install
3406E and 3456 Engines for Caterpillar Built Machines
Flywheel - Remove
C11 and C13 Engines for Caterpillar Built Machines
Flywheel - Install
C11 and C13 Engines for Caterpillar Built Machines
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
New Crankshaft Assemblies{1202,1204,1206,1207,1212}
1982/11/01
Service Reminders For 3400 Family Of Diesel Engines{1204,1214,1331}
1986/05/05
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
New One-Piece Flywheel Housing Gasket{1157,1201}
1978/07/03
No Gaskets Used With Aluminum Flywheel Housings{1157}
1991/10/14
New Plug And O-Ring Can Help Prevent Oil Leakage At The Flywheel Housing Gasket{1157,1307}
1992/09/21
Procedure For Installing Steel Core Gasket At The Front Housing And The Flywheel Housing {1151,1157,1162}
1996/11/25
Engine News
An Improved Front Gear Train Timing Procedure Is Used for 3406E, 3456, C-15, C-16, C15, and C18 Engines {1206}
2012/12/14
Special Instruction
Installation Of Short Blocks And Crankshafts{1202, 1204, 1206}
Installation Of Short Blocks And Crankshafts{1202, 1204, 1206}
Procedure to Torque the Camshaft Gear{1210, 1212}
Procedure to Torque the Camshaft Gear{1210, 1212}
Specifications
Front (Timing) Gear Group
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Front (Timing) Gear Group (621B, 623B)
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Rear Gear Group (D8N)
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Idler Gear Shaft Pilot Bore
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Idler Gear Assembly(For Front Gear Group)
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Front Housing And Covers
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Reuse And Salvage Guidelines
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Testing and Adjusting
Gear Group (Front) - Time
3406E and 3456 Engines for Caterpillar Built Machines
Disassembly and Assembly
Timing Gear Cover
3406 VEHICULAR ENGINE FOR D8N TRACTOR
Timing Gears And Plate
3406 VEHICULAR ENGINE FOR D8N TRACTOR
Gear Group (Front) - Remove
3406E and 3456 Engines for Caterpillar Built Machines
Gear Group (Front) - Install
3406E and 3456 Engines for Caterpillar Built Machines
Gear Group (Front) - Remove
C11 and C13 Engines for Caterpillar Built Machines
Gear Group (Front) - Install
C11 and C13 Engines for Caterpillar Built Machines
Gear Group (Rear) - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
New Crankshaft Assemblies{1202,1204,1206,1207,1212}
1982/11/01
Service Reminders For 3400 Family Of Diesel Engines{1204,1214,1331}
1986/05/05
Be Sure To Use Correct Camshaft Idler Gear Shaft And Bolts{1206}
1994/03/07
New Service Repair Camshaft Idler Gear Shaft Available For Use With Cylinder Blocks With Damaged Pilot Bore{1206,1212,1237}
1995/08/21
Procedure For Installing Steel Core Gasket At The Front Housing And The Flywheel Housing {1151,1157,1162}
1996/11/25
Checking The Alignment Of Timing Gear Marks {1206}
1997/01/27
Procedure to Torque the Camshaft Gear {1206, 1210}
2007/02/05
An Improved Front Gear Train Timing Procedure Is Used for 3406E, 3456, C-15, C-16, C15, and C18 Engines {1206}
2012/12/13
Special Instruction
Installation Of Service Flywheel Groups For 3406, 3408 And 3412 Engines{1156}
Installation Of Service Flywheel Groups For 3406, 3408 And 3412 Engines{1156}
Service Letter-NACD
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Specifications
Flywheel Housing
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Flywheel Housing Bore
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Flywheel Housing Runout
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Service Letter-China
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Asia
Service Letter-APD
Testing and Adjusting
Flywheel Housing - Inspect
3406E and 3456 Engines for Caterpillar Built Machines
Disassembly and Assembly
Flywheel Housing
3406 VEHICULAR ENGINE FOR D8N TRACTOR
Crankshaft Rear Seal And Wear Sleeve
3406 VEHICULAR ENGINE FOR D8N TRACTOR
Flywheel Housing - Remove and Install
3406E and 3456 Engines for Caterpillar Built Machines
Flywheel Housing - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines
Service Magazine
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine{0651,0654,1250}
1982/03/22
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
New One-Piece Flywheel Housing Gasket{1157,1201}
1978/07/03
Use The 6V2034 Micrometer Adapter To Measure Lip Thickness Of Engine Valves {0653,1105}
1979/10/29
No Gaskets Used With Aluminum Flywheel Housings{1157}
1991/10/14
New Plug And O-Ring Can Help Prevent Oil Leakage At The Flywheel Housing Gasket{1157,1307}
1992/09/21
Procedure For Installing Steel Core Gasket At The Front Housing And The Flywheel Housing {1151,1157,1162}
1996/11/25
Special Instruction
Installation Of Short Blocks And Crankshafts{1202, 1204, 1206}
Installation Of Short Blocks And Crankshafts{1202, 1204, 1206}
Specifications
Front (Timing) Gear Group
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Front (Timing) Gear Group (621B, 623B)
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Idler Gear Shaft Pilot Bore
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Idler Gear Assembly(For Front Gear Group)
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Front Housing And Covers
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Reuse And Salvage Guidelines
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Disassembly and Assembly
Timing Gear Cover
3406 VEHICULAR ENGINE FOR D8N TRACTOR
Timing Gears And Plate
3406 VEHICULAR ENGINE FOR D8N TRACTOR
Crankshaft Front Seal And Wear Sleeve
3406 VEHICULAR ENGINE FOR D8N TRACTOR
Housing (Front) - Remove
3406E and 3456 Engines for Caterpillar Built Machines
Housing (Front) - Install
3406E and 3456 Engines for Caterpillar Built Machines
Front Cover - Remove
3406E and 3456 Engines for Caterpillar Built Machines
Front Cover - Install
3406E and 3456 Engines for Caterpillar Built Machines
Front Cover - Remove
C11 and C13 Engines for Caterpillar Built Machines
Front Cover - Install
C11 and C13 Engines for Caterpillar Built Machines
Housing (Front) - Remove
C11 and C13 Engines for Caterpillar Built Machines
Housing (Front) - Install
C11 and C13 Engines for Caterpillar Built Machines
Service Magazine
New Crankshaft Assemblies{1202,1204,1206,1207,1212}
1982/11/01
Be Sure To Use Correct Camshaft Idler Gear Shaft And Bolts{1206}
1994/03/07
New Service Repair Camshaft Idler Gear Shaft Available For Use With Cylinder Blocks With Damaged Pilot Bore{1206,1212,1237}
1995/08/21
Procedure For Installing Steel Core Gasket At The Front Housing And The Flywheel Housing {1151,1157,1162}
1996/11/25
Checking The Alignment Of Timing Gear Marks {1206}
1997/01/27
New Valve Lifter Improves Oil Flow To Top Of Engine{1112,1119}
1990/04/02
Special Instruction
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Service Letter-NACD
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Australia
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-CFEL
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-CSARL
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Americas
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Brazil
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Truck/Ag/Marine
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Technical Information Bulletin
0R-3711, 0R-3714, 0R-3751, 0R-3752 Remanufactured Long Blocks
0R-3711, 0R-3714, 0R-3751, 0R-3752 Remanufactured Long Blocks
Tool Operating Manual
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
Service Letter-China
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Asia
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-APD
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Magazine
Real Value Available Through Caterpillar Remanufacturing Programs{0374}
1980/02/04
Connecting Rod Changes And Replacement Information{1218}
1980/03/03
Remanufactured Short Blocks Are Available For Repairs Of Early 3406 Engines{1201,1101,1102}
1980/03/31
6V2086 And 6V2087 Seal And Wear Sleeve Installers Available{0622,1160,1161}
1980/09/01
New Cylinder Liners And O-Ring Seals Give Longer Seal Life{1216,1201,1213,1227}
1981/12/14
Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Use 6V6035 Hardness Tester On Crankshafts{0651,1202}
1982/02/22
Reconditioning of Bridge Wear Seat Is Permitted; Will Prevent Bridge Replacement When Not Necessary{1100}
1982/03/08
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine{0651,0654,1250}
1982/03/22
Use Correct Part Numbers For Main And Connecting Rod Bearings{1230,1203,1219}
1982/04/12
Separate Valve Stem Gauges Available{0653,1000}
1982/06/07
Added Methods To Decrease The Effects Of High Sulfur Fuels{1355,1280,1318,1000}
1982/08/30
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Fuel In The Cooling System Or Coolant In The Engine Oil Can Result From Cracked Fuel Nozzle Adapter{1106}
1982/10/18
Reference Chart for Engine Improvements{0374,1000}
1982/10/25
New Crankshaft Assemblies{1202,1204,1206,1207,1212}
1982/11/01
6V6142 And 6V6143 Installers Can Be Used To Install Crankshaft Seals And Wear Sleeves{0622,0626,1160,1161}
1982/11/01
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
6V4869 Adapter And 6V6174 Plug Can Be Used To Install Camshaft Bearings{1211,0621}
1982/11/22
Use the 6V6167 Contact Point to Measure Wear Steps on Piston Pins{0653}
1982/11/22
Dimensions For Reconditioning Cylinder Blocks, Cylinder Heads{1201,1101,1103,1105}
1982/12/20
New Water Pump Has Improved Seal{1361}
1983/02/14
Engine Valve Stem &quot;Use Again&quot; Specifications{0653,1105}
1983/02/28
Use Vacuum Tester For Quality Control Check Of Water Pump Seal{0652,1361}
1983/02/28
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Parts Service Information For Pistons, Connecting Rods, Piston Pins And Rings{1214,1225,1215,1218}
1983/09/12
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
New Valve Lifter Assemblies Used In Valve Mechanism Groups{1209}
1983/10/31
Improved Oil Pan Drain Plug{1302}
1983/11/14
Crankshaft Failures{1202,1230}
1983/11/21
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Remanufactured Undersize Crankshafts Are Available{1202}
1983/11/21
Dimensions For Reconditioning Cylinder Blocks, Cylinder Heads{1201,1101,1103,1105}
1984/04/23
New Color Used For Fan Belt Tightener Spring{1358}
1984/06/04
New Cylinder Block Groups Used{1201}
1984/10/01
Install Crankshaft Thrust Bearings Correctly To Avoid Damage{1202,1203}
1985/02/11
New Crankshaft Seal Groups Used On More 3400 Series Engines{1160,1161}
1985/03/11
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
Be Sure Correct Piston Rings Are Used On 3400 Series Engines{1215,1214}
1985/05/06
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
Use Care When Handling Water Seals For Cylinder Head Spacer Plates{1115}
1985/07/15
Maximum Wear Limits Established For Camshaft Roller Followers{1209}
1985/09/30
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Two Different Piston Oil Ring Designs Used{1215}
1985/11/11
Remanufactured Crankshafts Are Available In Standard And Two Undersize Dimensions (U.S. and Canada){1202,7754}
1985/11/18
New Fuel Ratio Control Group Used On Engines Equipped With New Scroll Fuel System{1278}
1985/11/25
Crankshaft Seal Usage On 3400 Series Engines{1160,1161}
1985/12/16
New Cylinder Liner Available{1201}
1986/02/10
New 8T2998 Lubricant Available{0645,1210}
1986/02/17
New Index Lists Engine Special Instructions By SMCS Code{1000,0374}
1986/04/07
Service Reminders For 3400 Family Of Diesel Engines{1204,1214,1331}
1986/05/05
Increase Piston Reuse With Keystone Piston Ring Gauge Group{1214,1215}
1986/06/16
Indications Of Engine Overspeeding When Only One Cam Lobe/Lifter Has Failed{1000,1100,1200}
1986/09/08
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Check Connecting Rods After Engine Failures Involving Hydraulic Lock{1218,1225}
1986/10/20
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Modification To Holder To Machine Counterbore On Cylinder Block{0664,1201}
1977/02/28
Improved Exhaust Valve Now Available{1105}
1977/02/28
New Retainer And Improved Housing Keep Water Pump Bearing Tight; Repair For Loosened Bearing{1361}
1977/04/11
Tools To Remove Wear Sleeves From Crankshafts{0621,7558}
1977/04/18
New Piston Pin Bearing Used In Connecting Rod Assembly{1218}
1977/04/25
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Tools Now Available To Ream And/Or Hone 0.500&quot; (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Some Wobble Is Acceptable In Rubber Vibration Dampers For Crankshafts{1205}
1977/10/31
Crankshaft Support Groups Are Available To Measure Bent Crankshafts{0653,1202}
1977/11/07
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Recommendations For Preventing Cooling System Damage {1201}
1987/08/31
Mid-Life Bearing Maintenance Recommendations {1203}
1987/09/14
Microfiche For Replacement Engine Bills Of Material {0374,1000}
1987/10/26
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
Use 6V100 Tool Arrangement To Remove And Install Piston Pin Bearings For Both Tapered And Standard Connecting Rods{0620,1218}
1978/04/24
Explanation Of Nomenclature Used In Engine Performance{1000,0374}
1978/05/15
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
New One-Piece Flywheel Housing Gasket{1157,1201}
1978/07/03
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New 6V87 Gauge Measures Valve Stem Wear{0653,1105}
1979/01/08
Current Chart For Dynamometer Adapters{0651,1000}
1979/01/22
5P3519 Piston Ring Gauge Has Improved Design For Better Accuracy And Easier Use; Corrected Information For Use On Pistons That Have Two Ring Grooves{0653,1214}
1979/05/14
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Quick Disconnect Coupling On Optional Modification Of 5P4150 Nozzle Tester Permits Faster Exchange Of Adapters{0651,1254}
1979/09/03
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
Wider Connecting Rods Have More Bearing Area{1214,1218}
1979/11/05
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Check The Radiator Fan Spider Assembly When Doing Yearly General Maintenance{1356}
1989/07/24
Improved Head Gasket Used; Summary Of Earlier Gaskets And Service Tips{1124,1216,1221}
1989/08/21
Engine Coolant Can Be Recycled{1395}
1989/11/13
Additional Information For Checking Valve Camshaft Timing{1105,1110,1112,1121}
1989/12/11
Improvements Made To Water Pumps; New Groups/Parts Available For Certain Applications{1364,1361}
1990/02/19
Improved Head Gasket Used; Service Tips {1124,1216,1221,7568}
1990/02/26
Improved Seals Used; Seal Replacement In Folded Core Radiators{1353}
1990/06/04
Two New Coolant Flow Switches Used On Machines Equipped With Electronic Monitoring System (EMS){1361,7422,7470}
1990/09/24
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
Service Tips For Piston Cooling Jets (Tubes){1331}
1990/11/26
Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts{1202}
1991/01/07
New Crankshaft Seal Groups Provide Increased Protection From Dirt And Dust{1160,1161}
1991/07/08
No Gaskets Used With Aluminum Flywheel Housings{1157}
1991/10/14
New Piston Pin Retainer Used{1225}
1991/10/14
Thinner Spacer Plates Available For Parts Service{1221}
1992/06/29
Oil Holes In Crankshaft Main And Rod Journals{1202}
1992/11/09
New Liner Seat Inserts Available{1217}
1992/11/09
Damper Requirements For Remanufactured Short Blocks{1205}
1993/08/16
Be Sure To Use Correct Camshaft Idler Gear Shaft And Bolts{1206}
1994/03/07
New Intake And Exhaust Valves Used{1105,1100}
1994/06/20
New Rocker Arm Adjustment Screw Used To Adjust Valve Clearance{1123,1100}
1994/06/20
New Valve Lifter Assembly Provides Improved Lubrication Of Lifter Roller And Camshaft Lobes{1209,1210}
1994/06/20
New Inlet And Exhaust Valves Have Thinner Heads{1105}
1995/02/20
Specifications
Alternator Mounting Group (980C Wheel Loader, 824C Tractor, 825C &amp; 826C Compactors)
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Service Magazine
Identification Of External Terminals On Alternators {1405,1406,1400}
1998/12/07
Specifications
Trunnion Group
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Engine And Drive Support (245 Excavator)
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Engine Support
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Engine And Transmission Support (980C Wheel Loader)
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Service Magazine
Torque Check Necessary For Front Support Bracket Bolts When Damper And Pulley Are Removed {1153}
1996/05/13
Specifications
Oil Pan (Typical Example)
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Contamination Control Guidelines
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Disassembly and Assembly
Oil Pan
3406 VEHICULAR ENGINE FOR D8N TRACTOR
Engine Oil Pan - Remove and Install
3406E and 3456 Engines for Caterpillar Built Machines
Engine Oil Pan - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines
Service Magazine
Remove Piston Cooling Tubes Before Removal Of Pistons And Connecting Rods{1214,1218,1201,1225,1307}
1981/07/13
Improved Oil Pan Drain Plug{1302}
1983/11/14
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
New Plug And O-Ring Can Help Prevent Oil Leakage At The Flywheel Housing Gasket{1157,1307}
1992/09/21
Oil Drain Assembly Improved To Reduce Thread Interference With Drain Plug {1302}
1994/08/29
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
An Improved Three-Piece Oil Pan Gasket is Now Used {1302, 7555}
2008/09/29
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
3406, 3406C, and 3406E Engine Rebuild Kits for Machines Are Now Available {1000}
2012/06/08
Special Instruction
Use of Piston Pin Bearing Removal and Installation Tools{1218}
Use of Piston Pin Bearing Removal and Installation Tools{1218}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Piston Cleaning Procedure{1214}
Piston Cleaning Procedure{1214}
Service Letter-NACD
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-Australia
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-CFEL
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-CSARL
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-Americas
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-Brazil
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-Truck/Ag/Marine
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Specifications
Pistons And Rings
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Connecting Rods
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Bearings For Connecting Rods And Mains
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Service Letter-China
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-Asia
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-APD
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Magazine
Connecting Rod Changes And Replacement Information{1218}
1980/03/03
6V3197 Spacer, 6V3041 Tool Group Available For Use During Removal and Installation Of Piston Pin Bearings{0622,1219,1218,1214}
1981/03/30
Remove Piston Cooling Tubes Before Removal Of Pistons And Connecting Rods{1214,1218,1201,1225,1307}
1981/07/13
New Cylinder Liners And O-Ring Seals Give Longer Seal Life{1216,1201,1213,1227}
1981/12/14
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
Use Correct Part Numbers For Main And Connecting Rod Bearings{1230,1203,1219}
1982/04/12
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
New Bearing Standard: Quantity Of One Part Number Now Has Both Halves Of The Bearing{7551}
1982/08/09
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
Use the 6V6167 Contact Point to Measure Wear Steps on Piston Pins{0653}
1982/11/22
Pistons With Thicker Top Rings Must Be Used In Correct Applications {1214,1215}
1983/04/18
Reuse Of Engine Bearings{1230}
1983/05/16
Parts Service Information For Pistons, Connecting Rods, Piston Pins And Rings{1214,1225,1215,1218}
1983/09/12
New Connecting Rod And Main Bearings Used{1203,1219,1226,1227,1230}
1983/10/10
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
Be Sure Correct Piston Rings Are Used On 3400 Series Engines{1215,1214}
1985/05/06
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Two Different Piston Oil Ring Designs Used{1215}
1985/11/11
Service Reminders For 3400 Family Of Diesel Engines{1204,1214,1331}
1986/05/05
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Increase Piston Reuse With Keystone Piston Ring Gauge Group{1214,1215}
1986/06/16
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Check Connecting Rods After Engine Failures Involving Hydraulic Lock{1218,1225}
1986/10/20
Improved Main And Connecting Rod Bearings Have Aluminum Alloy With More Strength{1230}
1977/01/17
New Piston Pin Bearing Used In Connecting Rod Assembly{1218}
1977/04/25
Main And Connecting Rod Bearing Part Numbers {1203,1219,1230}
1987/01/26
Use Only Paint To Mark Connecting Rod Caps For Torque-Turn Method {1218,1219}
1987/06/01
Testing Connecting Rod Eye Bushings When Overhauling Engines{1218}
1987/07/06
Locating Bushings For The 5P3550 Rod Boring Machine Will Now Hold Tapered Piston Pin Bushings {0626}
1978/04/17
Use 6V100 Tool Arrangement To Remove And Install Piston Pin Bearings For Both Tapered And Standard Connecting Rods{0620,1218}
1978/04/24
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
5P3519 Piston Ring Gauge Has Improved Design For Better Accuracy And Easier Use; Corrected Information For Use On Pistons That Have Two Ring Grooves{0653,1214}
1979/05/14
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Wider Connecting Rods Have More Bearing Area{1214,1218}
1979/11/05
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Plasma Top Piston Rings Replace Chrome Rings{1215,1214}
1989/09/11

Truck sale:

Caterpillar D8N
 
Caterpillar D8N
- Crawler dozers
MILTON CAT
Caterpillar D8N, Crawler dozers, Construction
172,500 
Caterpillar D8N, Crawler dozers, Construction
- Crawler dozers
MICHIGAN CAT
Caterpillar D8N, Crawler dozers, Construction
54,500 
Caterpillar D8N, Crawler dozers, Construction
- Crawler dozers
MICHIGAN CAT
Caterpillar D8N, Crawler dozers, Construction
75,000 
Caterpillar D8N, Crawler dozers, Construction
- Crawler dozers
FOLEY, INC.
Caterpillar D8N, Crawler dozers, Construction
108,771 
Caterpillar D8N, Crawler dozers, Construction
- Crawler dozers
FINNING CANADA
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.