AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

4P-5893 DAMPER GP S/N BET12066-UP D8N TRACK-TYPE TRACTOR


BASIC ENGINE
DAMPER GP
DRIVE GP-FAN
DRIVE GP-PUMP
HOUSING GP-FRONT
FLYWHEEL GP
CAMSHAFT GP
GEAR GP
FLYWHEEL GP

TRACK-TYPE TRACTOR D8N TRACK-TYPE TRACTOR 1XJ
 3406E Engine Emissions Repower Tier II For D8N Tractor 1XJ00001-UP (MACHINE) SEBP4810 D8N 1XJ   (1989)

BASIC ENGINE

DAMPER GP
DAMPER GP
4P-5893 DAMPER GP
 

#SEBP48100030
 

4P-5893: DAMPER GP

4P-5893 DAMPER GP
S/N BET12066-UP
i00122098 SEBP4810
4P5893 DAMPER GP Parts scheme
  For full view, you need register

Parts for your D8N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 167-8126 [1] DAMPER AS  
2. 1A-3203 [6] BOLT (5/8-18X4.75-IN)  
3. 4N-2109 [1] ADAPTER-DAMPER  
4. 168-2100 [1] SPACER (131.57X163.6X8-MM THK)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP48100031
 

159-9429: DRIVE GP-FAN

159-9429 DRIVE GP-FAN
S/N 9TC1-UP; 1XJ1-UP; 5TJ1-UP
PART OF 263-5497 CONVERSION AR-ENGINE
i00962650 SEBP4810
1599429 DRIVE GP-FAN Parts scheme
  For full view, you need register

Parts for your D8N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-8596 [1] PULLEY-FAN DRIVE (4-GROOVE)  
2. 4P-3877 [1] BRACKET AS-FAN  
  4P-3875 [1] SHAFT-FAN  
3. 4W-8595 [1] PULLEY-CRANKSHAFT (5-GROOVE)  
4. 0S-1566 [4] BOLT (5/8-11X1.5-IN)  
5. 129-2416 [1] V-BELT SET (INCLUDES 3-BELTS)(FAN DRIVE)  
6. 1D-4602 [1] BOLT (5/8-11X9.5-IN)  
7. 5F-0149 [1] SEAL-O-RING  
8. 4P-3878 [1] HUB-FAN PULLEY  
9. 1W-4564 [1] WASHER-RETAINING (17X54X25-MM THK)  
10. 3B-1915 [6] BOLT (3/8-16X1.375-IN)  
11. 9W-3620 [2] CONE-BEARING  
12. 4P-3874 [1] SPACER  
13. 9W-3621 [2] CUP-BEARING  
14. 8T-9389 [4] BOLT (1/2-13X2.75-IN)  
15. 8B-8255 [1] SEAL-LIP TYPE  
16. 0S-1588 [6] BOLT (3/8-16X1.25-IN)  
17. 5M-8009 [1] PIN-SPRING  
18. 9Y-7889 [1] SPACER  
19. 8S-2387 [1] HOSE AS-FLEXIBLE  
20. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)(FAN DRIVE)  
21. 8L-6557 [1] CONNECTOR  
22. 119-4763 [1] ADAPTER  
23. 159-9376 [1] PLATE  
24. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
 

#SEBP48100032
 

6I-3638: DRIVE GP-PUMP

6I-3638 DRIVE GP-PUMP
S/N BET12066-UP
SAE 2
i00397491 SEBP4810
6I3638 DRIVE GP-PUMP Parts scheme
  For full view, you need register

Parts for your D8N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1590 [3] BOLT (3/8-16X2-IN)  
2. 8T-9527 [1] SEAL-O-RING  
3. 133-9907 YC [1] ADAPTER GP-PUMP DRIVE  
4. 5M-2894 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
5. 9S-8752 [1] NUT-FULL (3/8-16-THD)  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP48100033
 

150-3345: FASTENER GP-FRONT HOUSING

150-3345 FASTENER GP-FRONT HOUSING
S/N BET12066-13304
i00707865 SEBP4810
1503345 FASTENER GP-FRONT HOUSING Parts scheme
  For full view, you need register

Parts for your D8N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5M-3062 [1] BOLT (3/8-16X0.75-IN)  
2. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
 

#SEBP48100034
 

300-3764: FASTENER GP-FRONT HOUSING

300-3764 FASTENER GP-FRONT HOUSING
S/N BET13305-UP
FOR USE WITH ATTACHING THE STARTER GROUND WIRE TO THE 3406E ENGINE ON THE SOUND SUPPRESSED D8R SII
i02887663 SEBP4810
3003764 FASTENER GP-FRONT HOUSING Parts scheme
  For full view, you need register

Parts for your D8N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5S-7382 [1] BOLT (3/8-16X1.375-IN)  
2. 5P-1075 [1] WASHER-HARD (10.2X22.5X3-MM THK)  
 

#SEBP48100035
 

4P-6846: FASTENER GP-FRONT HOUSING

4P-6846 FASTENER GP-FRONT HOUSING
S/N BET12066-UP
i00384734 SEBP4810
4P6846 FASTENER GP-FRONT HOUSING Parts scheme
  For full view, you need register

Parts for your D8N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-0452 [1] PLATE  
2. 0S-1594 [2] BOLT (3/8-16X1-IN)  
3. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
 

#SEBP48100036
 

159-9019: FLYWHEEL GP

159-9019 FLYWHEEL GP
S/N BET12066-UP
i01031739 SEBP4810
1599019 FLYWHEEL GP Parts scheme
  For full view, you need register

Parts for your D8N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. [1] FLYWHEEL AS  
1A. 4N-2514 [1] GEAR (113-TEETH)  
2. 0S-1602 [12] BOLT (5/8-18X3.5-IN)  
3. 4D-3704 [12] WASHER-HARD (17X30X5-MM THK)  
 

#SEBP48100037
 

204-2114: GEAR GP-CAMSHAFT

204-2114 GEAR GP-CAMSHAFT
S/N BET12066-UP
ADDITIONAL BOLTS TO RETAIN PLATES IN HIGH LOAD APPLICATIONS
PART OF 137-5921 GEAR GP-FRONT
i01576899 SEBP4810
2042114 GEAR GP-CAMSHAFT Parts scheme
  For full view, you need register

Parts for your D8N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9X-8872 [16] BOLT-LOCKING (3/8-16X0.875-IN)  
2. 103-0126 [1] DOWEL  
 

#SEBP48100038
 

137-5921: GEAR GP-FRONT

137-5921 GEAR GP-FRONT
S/N BET12066-UP
i00709061 SEBP4810
1375921 GEAR GP-FRONT Parts scheme
  For full view, you need register

Parts for your D8N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1571 [1] BOLT (3/8-16X1.75-IN)  
2. 2J-3118 [5] BOLT-LOCKING (3/8-16X1.25-IN)  
3. 5P-4142 [2] BOLT-LOCKING (3/8-16X1.5-IN)  
4. 1B-8705 [1] KEY-WOODRUFF  
5. 1P-7346 [1] WASHER-HARD (10.2X35X6-MM THK)  
6. 126-1756 [10] BOLT-LOCKING (5/16-18X0.875-IN)  
7. 112-9217 [1] PLATE-THRUST  
8. 130-4701 [1] GEAR AS (56-TEETH)  
  130-4698 [1] BUSHING  
9. 151-5966 [1] SHAFT AS-STUB  
  6I-3623 [1] DOWEL  
10. 6I-3624 [2] PLATE-THRUST  
11. 6I-3625 [1] GEAR AS (71-TEETH)  
  101-8468 [1] BUSHING  
12. 128-2659 [1] GEAR AS (105, 63-TEETH)  
  6I-4581 [1] GEAR (105-TEETH)  
  6I-4582 [1] GEAR (63-TEETH)  
  131-7123 [1] BUSHING  
  1B-8705 [1] KEY-WOODRUFF  
13. 248-3008 [1] SHAFT-STUB  
14. 158-3416 [1] SHAFT-STUB  
15. 031-3185 [6] BOLT-12 POINT HEAD (5/8-11X3-IN)  
16. 7E-5661 [1] GEAR-OIL PUMP DRIVE (69-TEETH)  
17. 9S-8752 [10] NUT-FULL (3/8-16-THD)  
18. 9X-6458 [12] WASHER-HARD (10.2X22.5X3-MM THK)  
19. 117-8801 [1] SEAL-O-RING  
20. 5E-8771 [1] SEAL-O-RING  
21. 117-8557 [1] PLATE-SEAL  
22. 128-8853 [1] ADAPTER AS  
  6V-3677 [1] DOWEL  
23. 102-5861 [1] PLATE-THRUST  
24. 107-0583 [3] BOLT-LOCKING (1/4-20X0.87-IN)  
25. 204-2114 Y [1] GEAR GP-CAMSHAFT (96-TEETH)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP48100039
 

9Y-2187: GEAR GP-REAR

9Y-2187 GEAR GP-REAR
S/N BET12066-UP
i01694906 SEBP4810
9Y2187 GEAR GP-REAR Parts scheme
  For full view, you need register

Parts for your D8N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9Y-2094 [1] GEAR AS-CRANKSHAFT (68-TEETH)  
1A. 4N-0684 [1] DOWEL  
2. 9Y-1981 [1] GEAR AS-IDLER (78-TEETH)  
2A. 1W-4738 [1] BUSHING  
3. 187-8197 C [1] GEAR AS (57-TEETH)  
  4F-6024 [1] PIN  
4. 9Y-1985 [1] GEAR AS-IDLER (55-TEETH)  
4A. 1W-4738 [1] BUSHING  
5. 187-8196 C [1] GEAR AS (68-TEETH)  
  4F-6024 [1] PIN  
6. 187-8224 C [1] ADAPTER AS-PUMP  
6A. 160-8184 [1] BUSHING  
7. 187-8225 C [1] ADAPTER AS-PUMP  
7A. 160-8184 [1] BUSHING  
8. 9Y-2092 [2] RETAINER-IDLER  
9. 3F-1547 [1] SEAL-O-RING  
10. 6V-5141 [1] SEAL-O-RING  
11. 1A-1460 [6] BOLT (1/2-13X2-IN)  
12. 0S-1588 [6] BOLT (3/8-16X1.25-IN)  
13. 3B-1915 [6] BOLT (3/8-16X1.375-IN)  
  C   CHANGE FROM PREVIOUS TYPE
 

Information:

Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Testing and Adjusting
Vibration Damper - Check
3406E and 3456 Engines for Caterpillar Built Machines
Disassembly and Assembly
Crankshaft Pulley And Vibration Damper
3406 VEHICULAR ENGINE FOR D8N TRACTOR
Vibration Damper and Pulley - Remove and Install
3406E and 3456 Engines for Caterpillar Built Machines
Vibration Damper and Pulley - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines
Service Magazine
Some Wobble Is Acceptable In Rubber Vibration Dampers For Crankshafts{1205}
1977/10/31
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut {0601}
1988/01/25
Damper Requirements For Remanufactured Short Blocks{1205}
1993/08/16
New Engine Crankshaft Rubber Damper Assembly Uses Improved Rubber Material{1205}
1994/10/03
Recommendations For Inspection And Replacement Of Rubber and Viscous Crankshaft Dampers{1205}
1995/08/21
Torque Check Necessary For Front Support Bracket Bolts When Damper And Pulley Are Removed {1153}
1996/05/13
Points To Remember When Replacing A Viscous Crankshaft Damper Assembly With A Rubber Crankshaft Damper Assembly {1205}
1997/01/27

Caterpillar Parts SIS Catalog D8N :

CYLINDER HEAD GP
263-5055 CYLINDER HEAD GP
CYLINDER HEAD GP
235-3176 CYLINDER HEAD GP
CYLINDER HEAD GP
235-3176 CYLINDER HEAD GP
CYLINDER HEAD GP
223-9250 CYLINDER HEAD GP
CYLINDER HEAD AS
281-1640 CYLINDER HEAD AS
CYLINDER HEAD AS
223-7263 CYLINDER HEAD AS
CYLINDER BLOCK GP
202-1261 CYLINDER BLOCK GP
CYLINDER BLOCK GP
202-1254 CYLINDER BLOCK GP
DRIVE GP-FAN
159-9429 DRIVE GP-FAN
DRIVE GP-PUMP
6I-3638 DRIVE GP-PUMP
FASTENER GP-FRONT HOUSING
150-3345 FASTENER GP-FRONT HOUSING
FASTENER GP-FRONT HOUSING
300-3764 FASTENER GP-FRONT HOUSING
FASTENER GP-FRONT HOUSING
4P-6846 FASTENER GP-FRONT HOUSING
FLYWHEEL GP
159-9019 FLYWHEEL GP
GEAR GP-CAMSHAFT
204-2114 GEAR GP-CAMSHAFT
GEAR GP-FRONT
137-5921 GEAR GP-FRONT

Truck sale:

Caterpillar D8N
 
Caterpillar D8N
- Crawler dozers
MILTON CAT
Caterpillar D8N, Crawler dozers, Construction
172,500 
Caterpillar D8N, Crawler dozers, Construction
- Crawler dozers
MICHIGAN CAT
Caterpillar D8N, Crawler dozers, Construction
54,500 
Caterpillar D8N, Crawler dozers, Construction
- Crawler dozers
MICHIGAN CAT
Caterpillar D8N, Crawler dozers, Construction
75,000 
Caterpillar D8N, Crawler dozers, Construction
- Crawler dozers
FOLEY, INC.
Caterpillar D8N, Crawler dozers, Construction
108,771 
Caterpillar D8N, Crawler dozers, Construction
- Crawler dozers
FINNING CANADA
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.