AIR INLET AND EXHAUST SYSTEM
TURBOCHARGER GPLINES GP-AIR
MANIFOLD GP-EXHAUST
EXHAUST GP
TURBOCHARGER GP
FUEL SYSTEM
FILTER GP-FUELAIR INLET AND EXHAUST SYSTEM
TURBOCHARGER GP#SEBP48100100
167-9270: CARTRIDGE GP-TURBOCHARGER
167-9270 CARTRIDGE GP-TURBOCHARGER
S/N BET12066-UP
PART OF 178-9572 TURBOCHARGER GP
S/N BET12066-UP
PART OF 178-9572 TURBOCHARGER GP
Parts for your D8N TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 206-8868 | [1] | SEAL-RING | |
| 2. | 211-2264 | [1] | RING-PISTON | |
| 3. | 239-5894 | [2] | BEARING-JOURNAL | |
| 4. | 211-2261 | [1] | BEARING-THRUST | |
| 5. | 211-2260 | [1] | COLLAR-THRUST | |
| 6. | 211-2259 | [2] | RING-PISTON | |
| 7. | 461-3792 | [3] | WASHER (WEAR) | |
| 8. | 461-3728 | [3] | RING-RETAINING | |
| 9. | 156-6964 M | [4] | BOLT (M8X1.25X30-MM) | |
| 10. | 4P-3818 M | [3] | BOLT (M4X0.7X10-MM) | |
| M | METRIC PART | |||
#SEBP48100101
156-8543: LINES GP-AIR
156-8543 LINES GP-AIR
S/N BET12066-UP
S/N BET12066-UP
Parts for your D8N TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2N-2765 | [2] | BOLT-HIGH TEMPERATURE (3/8-16X1.75-IN) | |
| 2. | 2N-2766 | [2] | LOCKNUT (3/8-16-THD) | |
| 3. | 4L-8337 | [2] | SEAL-O-RING | |
| 4. | 5L-8854 | [2] | RING-SEALING | |
| 5. | 5S-1188 | [2] | SEAL-O-RING | |
| 6. | 9L-5839 | [1] | COUPLING-EXHAUST | |
| 7. | [1] | SUPPORT-EXHAUST PIPE | ||
| 8. | [1] | ELBOW | ||
| 9. | 1A-2029 C | [1] | BOLT (3/8-16X1.125-IN) | |
| 10. | 5M-2894 C | [1] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 11. | 7W-3145 C | [1] | PLATE | |
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP48100102
161-2431: LINES GP-AIR
161-2431 LINES GP-AIR
S/N 9TC1-UP; 1XJ1-UP; 5TJ1-UP
PART OF 263-5497 CONVERSION AR-ENGINE
S/N 9TC1-UP; 1XJ1-UP; 5TJ1-UP
PART OF 263-5497 CONVERSION AR-ENGINE
Parts for your D8N TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7N-6908 | [1] | ELBOW | |
| 2. | 121-4862 | [1] | SUPPORT | |
| 3. | [1] | PIPE AS-AIR TRANSFER | ||
| 2M-1538 | [10] | STUD-TAPERLOCK (3/8-16X1.6-IN) | ||
| 7M-1674 | [1] | SCREEN-AIR CLEANER INLET (AIR TRANSFER PIPE) | ||
| 8T-6764 | [1] | PLUG-PIPE (1/8-27-THD) | ||
| 4. | 2M-5173 | [4] | SEAL-O-RING | |
| 5. | 3K-0360 | [1] | SEAL-O-RING | |
| 6. | 4L-9337 | [6] | BOLT (3/8-16X1.5-IN) | |
| 7. | 5P-1075 | [4] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 8. | 5S-7383 | [1] | BOLT (3/8-16X1.75-IN) | |
| 9. | 6V-8801 | [1] | NUT (3/8-16-THD) | |
| 10. | 8T-4896 | [3] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 11. | 9S-4185 | [1] | PLUG (3/4-16-THD) | |
#SEBP48100103
157-7087: MANIFOLD GP-EXHAUST
157-7087 MANIFOLD GP-EXHAUST
S/N BET12066-UP
S/N BET12066-UP
Parts for your D8N TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | [1] | MANIFOLD-EXHAUST | ||
| 2. | 102-8608 | [2] | MANIFOLD-EXHAUST (END) | |
| 3. | 2N-2766 | [12] | LOCKNUT (3/8-16-THD) | |
| 4. | 5M-2894 | [12] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 5. | 108-3612 | [12] | SPACER (11.13X19.05X53-MM THK) | |
| 6. | 129-9452 | [6] | GASKET-EXHAUST MANIFOLD | |
| 7. | 106-1792 | [12] | STUD-TAPERLOCK (3/8-16X4-IN) | |
#SEBP48100104
201-1478: SHIELD GP-EXHAUST
201-1478 SHIELD GP-EXHAUST
S/N 9TC1-UP; 1XJ1-UP; 5TJ1-UP
PART OF 263-5497 CONVERSION AR-ENGINE
S/N 9TC1-UP; 1XJ1-UP; 5TJ1-UP
PART OF 263-5497 CONVERSION AR-ENGINE
Parts for your D8N TRACK-TYPE TRACTOR:
CATERPILLAR SIS#SEBP48100105
178-9572: TURBOCHARGER GP
Parts for your D8N TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7N-7672 | [2] | PLATE | |
| 2. | 7N-7673 | [2] | PLATE | |
| 3. | 9N-2038 | [1] | CLAMP AS-TURBINE (TURBINE) | |
| 4. | 178-9573 | [1] | COVER-COMPRESSOR | |
| 5. | 135-7875 | [1] | CLAMP AS-COMPRESSOR | |
| 6. | 148-9104 | [1] | HOUSING | |
| 7. | 167-9270 Y | [1] | CARTRIDGE GP-TURBOCHARGER | |
| 8. | 2A-0762 | [4] | BOLT (1/4-20X0.625-IN) | |
| 9. | 5P-0537 | [4] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP48100106
183-6925: TURBOCHARGER GP
183-6925 TURBOCHARGER GP
S/N BET12066-UP
S/N BET12066-UP
Parts for your D8N TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 178-9572 Y | [1] | TURBOCHARGER GP | |
| 2. | 2N-2765 | [4] | BOLT-HIGH TEMPERATURE (3/8-16X1.75-IN) | |
| 3. | 2N-2766 | [4] | LOCKNUT (3/8-16-THD) | |
| 4. | 1S-4295 | [1] | GASKET (TURBOCHARGER) | |
| 4C-5598 AB | COMPOUND-ANTI-SEIZE | |||
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP48100107
139-6941: BASE GP-FUEL FILTER
139-6941 BASE GP-FUEL FILTER
S/N BET12066-UP
PART OF 161-3202 FILTER GP-SECONDARY FUEL
S/N BET12066-UP
PART OF 161-3202 FILTER GP-SECONDARY FUEL
Parts for your D8N TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 136-5017 | [1] | BASE AS-FUEL FILTER | |
| 1A. | 9S-4167 | [1] | STUD-HOLLOW (1-14X1.47-IN) | |
| 2. | 183-3408 C | [1] | PLUG AS | |
| 2A. | 6V-5049 | [1] | SEAL-O-RING | |
| 9S-8004 | [1] | PLUG (9/16-18-THD) | ||
| 4. | 139-6873 Y | [1] | VALVE GP-FUEL BYPASS (FILTER) | |
| 5. | 233-6742 CY | [1] | VALVE GP-CHECK (FUEL) | |
| 6. | 6V-4589 C | [1] | SEAL-O-RING | |
| 7. | 102-2240 Y | [1] | SENSOR GP-TEMPERATURE (FUEL) | |
| 8. | 143-2933 | [1] | FITTING | |
| 9. | 8L-2786 | [2] | SEAL-O-RING | |
| 10. | 8L-2779 | [1] | SEAL-O-RING | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP48100108
161-3202: FILTER GP-SECONDARY FUEL
161-3202 FILTER GP-SECONDARY FUEL
S/N BET12066-UP
S/N BET12066-UP
Parts for your D8N TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1B-2790 | [1] | BOLT (5/16-18X1.375-IN) | |
| 2. | 1P-0436 | [1] | GASKET (FUEL PRIMING PUMP)(COVER) | |
| 3. | 1R-0749 | [1] | FILTER-FUEL (ADVANCED EFFICIENCY) | |
| 4. | 6N-4414 | [1] | COVER-FILTER BASE | |
| 5. | 5P-0537 | [1] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 6. | 7B-2742 | [1] | BOLT (1/4-20X1.25-IN) | |
| 7. | 9M-1974 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 8. | 139-6941 Y | [1] | BASE GP-FUEL FILTER | |
| 9. | [1] | COVER-CYLINDER BLOCK | ||
| 10. | 109-7425 | [1] | SEAL-COVER | |
| 11. | 0S-1588 | [2] | BOLT (3/8-16X1.25-IN) | |
| 12. | 5M-2894 | [6] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 13. | 0S-1591 | [4] | BOLT (3/8-16X1.5-IN) | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP48100109
176-5618: FILTER GP-WATER SEP & FUEL
176-5618 FILTER GP-WATER SEP & FUEL
S/N BET12066-UP
PART OF 185-9978 FILTER GP-WATER SEP & FUEL
S/N BET12066-UP
PART OF 185-9978 FILTER GP-WATER SEP & FUEL
Parts for your D8N TRACK-TYPE TRACTOR:
CATERPILLAR SISInformation:
AIR INLET AND EXHAUST SYSTEM
TURBOCHARGER GP
Truck Engine News
Engine News
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Special Instruction
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Instructions for the Service Replacement of the Turbochargers{1052}
Instructions for the Service Replacement of the Turbochargers{1052}
Instructions for the Service Replacement of the Turbochargers{1052}
Installation Instructions for Turbochargers {1052}
Installation Instructions for Turbochargers {1052}
Installation Instructions for Turbochargers {1052}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Specifications
Reuse And Salvage Guidelines
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Information Release Memo
CAT REMAN ANNOUNCES EXPANDED TURBOCHARGER AND CARTRIDGE COVERAGE FOR CERTAIN ENGINE MODELS
CAT REMAN ANNOUNCES EXPANDED TURBOCHARGER AND CARTRIDGE COVERAGE FOR CERTAIN ENGINE MODELS
CAT REMAN ANNOUNCES EXPANDED TURBOCHARGER AND CARTRIDGE COVERAGE FOR CERTAIN ENGINE MODELS
Testing and Adjusting
Disassembly and Assembly
Service Magazine
Remove Piston Cooling Tubes Before Removal Of Pistons And Connecting Rods{1214,1218,1201,1225,1307}
1981/07/13
1981/07/13
Exhaust Manifold And Air Lines Changes Prevent Broken Studs And Exhaust Leaks {1059,1061}
1981/09/14
1981/09/14
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect{1053}
1986/02/03
1986/02/03
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels{0374,1052}
1977/02/28
1977/02/28
New Air Inlet Manifold Has Longer Bolt Bosses With More Thread Depth To Keep Bolts Tight{1058}
1977/08/08
1977/08/08
Use Of 9S3265 Retaining Compound On Schwitzer Turbocharger Compressor Wheel Retainer Nuts{1052,1053}
1979/06/25
1979/06/25
Only One Dowel Pin Is Now Used To Hold The Thrust Bearing In The Correct Position{1053,1052}
1979/09/03
1979/09/03
New Plug And O-Ring Can Help Prevent Oil Leakage At The Flywheel Housing Gasket{1157,1307}
1992/09/21
1992/09/21
Prevent the Possibility of Contamination in order to Ensure Longer Life of Turbochargers {1052}
2003/12/15
2003/12/15
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}




