C15 Engine Emissions Retrofit Repower Tier III For 825C, 826C Compactor And 824C Wheel Tractor 85X00001-UP (MACHINE) LUBRICATION SYSTEM Caterpillar SIS




WHEEL DOZER 824C WHEEL DOZER 85X
 C15 Engine Emissions Retrofit Repower Tier III For 825C, 826C Compactor And 824C Wheel Tractor 85X00001-UP (MACHINE) SEBP4812 824C 85X   (1978)

Parts group 824C:

  For full view, you need register
LUBRICATION SYSTEM
FILLER GP-ENGINE OIL
FILLER GP-ENGINE OIL
317-6078 FILLER GP-ENGINE OIL
317-6078 FILLER GP-ENGINE OIL
S/N TXG2726-UP; LHX15363-99999
FILTER GP-ENGINE OIL
FILTER GP-ENGINE OIL
263-5373 FILTER GP-ENGINE OIL
263-5373 FILTER GP-ENGINE OIL
S/N TXG2726-UP; LHX15363-99999
FUMES DISPOSAL GP
FUMES DISPOSAL GP
237-1965 FUMES DISPOSAL GP
237-1965 FUMES DISPOSAL GP
S/N TXG2726-UP; LHX15363-99999
GUIDE GP-OIL LEVEL
GUIDE GP-OIL LEVEL GAUGE
263-7309 GUIDE GP-OIL LEVEL GAUGE
263-7309 GUIDE GP-OIL LEVEL GAUGE -ENGINE
S/N TXG2726-UP; LHX15363-99999
RIGHT HAND FRONT
GUIDE GP-OIL LEVEL GAUGE
263-7309 GUIDE GP-OIL LEVEL GAUGE
263-7309 GUIDE GP-OIL LEVEL GAUGE -ENGINE
S/N TXG2726-UP
RIGHT HAND FRONT
LINES GP-ENGINE OIL
LINES GP-ENGINE OIL
219-4443 LINES GP-ENGINE OIL
219-4443 LINES GP-ENGINE OIL -FILTER
S/N TXG2726-UP; LHX15363-99999
LINES GP-TURBOCHARGER OIL
LINES GP-TURBOCHARGER OIL
273-6667 LINES GP-TURBOCHARGER OIL
273-6667 LINES GP-TURBOCHARGER OIL
S/N LHX15363-99999
LINES GP-TURBOCHARGER OIL
273-6667 LINES GP-TURBOCHARGER OIL
273-6667 LINES GP-TURBOCHARGER OIL
S/N TXG2726-UP
PUMP GP-ENGINE OIL
FASTENER GP-OIL PUMP MOUNTING
4N-2481 FASTENER GP-OIL PUMP MOUNTING
4N-2481 FASTENER GP-OIL PUMP MOUNTING -ENGINE
S/N TXG2726-UP; LHX15363-99999
PUMP GP-ENGINE OIL
161-4113 PUMP GP-ENGINE OIL
161-4113 PUMP GP-ENGINE OIL
S/N TXG2726-UP; LHX15363-99999

Information:

(For parts list, see above)

Specifications
Breather Cap
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Tool Operating Manual
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Testing and Adjusting
Engine Crankcase Pressure (Blowby) - Test
3406E and 3456 Engines for Caterpillar Built Machines
Special Instruction
Installation of 5L8984, 3N584 and 8N1571 Solenoid Shutoff Groups{1259}
Installation of 5L8984, 3N584 and 8N1571 Solenoid Shutoff Groups{1259}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Service Magazine
A New Oil Filler Tube and New Oil Filler Cap are Now Available {1316}
2003/12/01
Special Instruction
Managing Engine Oil Service Intervals for Equipment Operating at High Altitudes{1261, 1308, 1348}
Managing Engine Oil Service Intervals for Equipment Operating at High Altitudes{1261, 1308, 1348}
Service Letter-NACD
The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory
The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Specifications
Oil Filter (245 Excavator, 621B and 623B Tractors)
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Oil Filter (16G Motor Grader, 824C Tractor, 825C & 826C Compactors, 980C Wheel Loader, 983B Track-Type Loader, 621E and 623E Tractors)
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Oil Cooler Bypass Valve
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Oil Filter
3406C ENGINE FOR CATERPILLAR BUILT MACHINES
Oil Cooler Bypass Valve
3406C ENGINE FOR CATERPILLAR BUILT MACHINES
Service Letter-China
The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory
The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory
Service Letter-Asia
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Service Letter-APD
The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory
The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory
Disassembly and Assembly
Oil Filter & Base Assembly
3406C DIESEL ENGINES FOR CATERPILLAR BUILT MACHINES
Oil Filter Base
3406 VEHICULAR ENGINE FOR 824C TRACTOR, 825C & 826C COMPACTO
Engine Oil Cooler
3406 VEHICULAR ENGINE FOR 824C TRACTOR, 825C & 826C COMPACTO
Engine Oil Filter Base - Remove
3406E and 3456 Engines for Caterpillar Built Machines
Engine Oil Filter Base - Install
3406E and 3456 Engines for Caterpillar Built Machines
Engine Oil Filter Base - Disassemble
3406E and 3456 Engines for Caterpillar Built Machines
Engine Oil Filter Base - Assemble
3406E and 3456 Engines for Caterpillar Built Machines
Engine Oil Filter Base - Remove
C15 and C18 Engines for Caterpillar Built Machines
Engine Oil Filter Base - Assemble
C15 and C18 Engines for Caterpillar Built Machines
Engine Oil Filter Base - Install
C15 and C18 Engines for Caterpillar Built Machines
Engine Oil Filter Base - Disassemble
C15 and C18 Engines for Caterpillar Built Machines
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Lubricant Recommendations Changed For All Caterpillar Engines To Combat Effects Of Fuel Sulfur{1318,0375,0374,1280}
1982/05/03
Added Methods To Decrease The Effects Of High Sulfur Fuels{1355,1280,1318,1000}
1982/08/30
New Oil Additives Can Cause High Copper (Cu) Indications During S.O.S. Tests{0372,1318}
1982/09/27
Oil Filter Inspection Can Save Additional Internal Engine Damage{1318}
1985/06/17
Fuel Sulfur Analyzer Available{0651,1280,1318}
1986/01/13
Engine Oil Filter Element Has Metal Wrapper Instead Of Paper Wrapper{1318}
1986/03/10
Field Repair Of Cooler Cores Made Of Aluminium{1063,1374,1375}
1977/09/05
Some 2P4005 Oil Filter Assemblies May Be Difficult To Install{1318}
1987/02/16
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
New Engine Oil Coolers Have Rubber End Sheets {1378}
1988/01/25
Stronger Suction Bell Assembly Now Used In Engine Oil Lines Group{1318,1307}
1979/02/05
Use Correct Procedure To Clean The Engine Lubrication System If Permanent Type Antifreeze (Ethylene Glycol) Is In The Engine{1318,1350}
1979/02/19
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fast Fuel Delivery Couplings And Fast Oil Change Couplings Are Available For All Caterpillar Equipment{0671,1273,1279,1325}
1979/10/08
Engine Oil Viscosity Changed To SAE 10W/30 For Shipment From All U.S. Factories{1318}
1979/10/15
Installation Procedure For 1R-0716 Engine Oil Filter{1318}
1994/06/20
Color Coded Dust Caps for S·O·S Ports Will Be Available {7770}
2003/12/01
New High Efficiency Oil Filters are Now Available {1308}
2004/03/22
New High Efficiency Oil Filters are Now Available {1308}
2006/07/03
Tool Operating Manual
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Service Magazine
Changes To Oil Level Gauge Group Improve Accuracy Of Oil Level Indications, Increase Oil Capacity Of 245 Excavators And Front Shovels{1300}
1980/05/12
Special Instruction
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Specifications
Engine Oil Lines
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Oil Cooler Bypass Valve
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Disassembly and Assembly
Piston Cooling Tubes
3406C DIESEL ENGINES FOR CATERPILLAR BUILT MACHINES
Service Magazine
Remove Piston Cooling Tubes Before Removal Of Pistons And Connecting Rods{1214,1218,1201,1225,1307}
1981/07/13
Added Methods To Decrease The Effects Of High Sulfur Fuels{1355,1280,1318,1000}
1982/08/30
Stronger Suction Bell Assembly Now Used In Engine Oil Lines Group{1318,1307}
1979/02/05
Use Correct Procedure To Clean The Engine Lubrication System If Permanent Type Antifreeze (Ethylene Glycol) Is In The Engine{1318,1350}
1979/02/19
Engine Oil Viscosity Changed To SAE 10W/30 For Shipment From All U.S. Factories{1318}
1979/10/15
New Plug And O-Ring Can Help Prevent Oil Leakage At The Flywheel Housing Gasket{1157,1307}
1992/09/21
Installation Procedure For 1R-0716 Engine Oil Filter{1318}
1994/06/20
Remove Piston Cooling Tubes Before Removal Of Pistons And Connecting Rods{1214,1218,1201,1225,1307}
1981/07/13
New Plug And O-Ring Can Help Prevent Oil Leakage At The Flywheel Housing Gasket{1157,1307}
1992/09/21
Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307}
2006/02/20
Disassembly and Assembly
Oil Filter Base
3406 VEHICULAR ENGINE FOR 824C TRACTOR, 825C & 826C COMPACTO
Service Magazine
Changes To Oil Level Gauge Group Improve Accuracy Of Oil Level Indications, Increase Oil Capacity Of 245 Excavators And Front Shovels{1300}
1980/05/12
Different O-Ring Seal Now Used On The Oil Pump Suction Tube{1307,1304}
1980/12/01
Different O-Ring Seal Now Used On The Oil Pump Suction Tube{1307,1304}
1981/02/16
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Added Methods To Decrease The Effects Of High Sulfur Fuels{1355,1280,1318,1000}
1982/08/30
New Oil Additives Can Cause High Copper (Cu) Indications During S.O.S. Tests{0372,1318}
1982/09/27
Remanufactured Oil Pumps Available{1304}
1984/06/04
Oil Filter Inspection Can Save Additional Internal Engine Damage{1318}
1985/06/17
Fuel Sulfur Analyzer Available{0651,1280,1318}
1986/01/13
Oil Total Base Number (TBN) Test Kit Available{1300}
1986/01/20
Engine Oil Filter Element Has Metal Wrapper Instead Of Paper Wrapper{1318}
1986/03/10
Precision Oil Pump Bearings Now Available{1304}
1977/11/07
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
Black Light Leak Detection Kit Available For Oil, Fuel and Cooling Systems {0774,1250,1300,1350}
1987/05/11
Stronger Suction Bell Assembly Now Used In Engine Oil Lines Group{1318,1307}
1979/02/05
Use Correct Procedure To Clean The Engine Lubrication System If Permanent Type Antifreeze (Ethylene Glycol) Is In The Engine{1318,1350}
1979/02/19
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Engine Oil Viscosity Changed To SAE 10W/30 For Shipment From All U.S. Factories{1318}
1979/10/15
Installation Procedure For 1R-0716 Engine Oil Filter{1318}
1994/06/20
Improved Prelube Pressure Switch Available {1400,1435,1319}
1995/09/11
Special Instruction
Installation and Operation of the Cat QuickEvac<SUP>TM</SUP> System{0707, 1325}
Installation and Operation of the Cat QuickEvacTM System{0707, 1325}
Supplement to the Operation and Maintenance Manual{0707}
Supplement to the Operation and Maintenance Manual{0707}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Service Magazine
Fast Fuel Delivery Couplings And Fast Oil Change Couplings Are Available For All Caterpillar Equipment{0671,1273,1279,1325}
1979/10/08
New Cat QuickEvac<SUP>TM</SUP> High Speed Oil Change Arrangements Are Available {1302, 1372}
2003/03/10
New QuickEvac High Speed Oil Change Arrangements Are Available {1325}
2006/08/21
Special Instruction
Caterpillar PRELUB<SUP>&reg;</SUP> Diagnostics{1469}
Caterpillar PRELUB® Diagnostics{1469}
Engine News
Identifying Oil Pumps on Certain 3400, C27, and C32 Engines {1304}
Identifying Oil Pumps on Certain 3400, C27, and C32 Engines {1304}
Special Instruction
Installation of 0R0918 Remanufactured Oil Pump{1304, 7754}
Installation of 0R0918 Remanufactured Oil Pump{1304, 7754}
3400 Engine Oil Pumps{1304}
3400 Engine Oil Pumps{1304}
Assembly Instruction for the New 3400 Oil Pump Body Serviced Assembly{1304}
Assembly Instruction for the New 3400 Oil Pump Body Serviced Assembly{1304}
Technical Information Bulletin
Remanufactured Oil Pumps May Have a Shallow Suction Tube Port on Certain 3400 Engines{1304}
Remanufactured Oil Pumps May Have a Shallow Suction Tube Port on Certain 3400 Engines{1304}
Specifications
Oil Pump
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Oil Pump (One Section Gear)
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Oil Pump
3406C ENGINE FOR CATERPILLAR BUILT MACHINES
Reuse And Salvage Guidelines
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Reuse and Salvage for 3044, 3046, 3064, 3066, 3400, 3500, and C175 Engine Oil Pumps {1304, 1315}
Reuse and Salvage for 3044, 3046, 3064, 3066, 3400, 3500, and C175 Engine Oil Pumps {1304, 1315}
Disassembly and Assembly
Oil Pump
3406C DIESEL ENGINES FOR CATERPILLAR BUILT MACHINES
Oil Pump
3406 VEHICULAR ENGINE FOR 824C TRACTOR, 825C & 826C COMPACTO
Engine Oil Pump - Disassemble
3406E and 3456 Engines for Caterpillar Built Machines
Engine Oil Pump - Install
3406E and 3456 Engines for Caterpillar Built Machines
Engine Oil Pump - Assemble
3406E and 3456 Engines for Caterpillar Built Machines
Engine Oil Pump - Remove
3406E and 3456 Engines for Caterpillar Built Machines
Engine Oil Pump - Remove
C15 and C18 Engines for Caterpillar Built Machines
Engine Oil Pump - Install
C15 and C18 Engines for Caterpillar Built Machines
Engine Oil Pump - Disassemble
C15 and C18 Engines for Caterpillar Built Machines
Engine Oil Pump - Assemble
C15 and C18 Engines for Caterpillar Built Machines
Service Magazine
Different O-Ring Seal Now Used On The Oil Pump Suction Tube{1307,1304}
1980/12/01
Different O-Ring Seal Now Used On The Oil Pump Suction Tube{1307,1304}
1981/02/16
Remanufactured Oil Pumps Available{1304}
1984/06/04
New Oil Pump Gears Used {1304}
1986/07/07
Precision Oil Pump Bearings Now Available{1304}
1977/11/07
Procedure To Retain Oil Pump When Pump Mounting Pad On Cylinder Block Is Broken{1201,1304}
1991/05/20
Different Housings are Used on 3400 Remanufactured Engines {1304}
2007/04/02
Identifying Oil Pumps on Certain 3400, C27, and C32 Machine Engines {1304}
Identifying Oil Pumps on Certain 3400, C27, and C32 Machine Engines {1304}
Reuse And Salvage Guidelines
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Truck Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/11/29
Portable Contamination Monitor Group Provides a Lower Cost Alternative to Particle Counting {0781, 0784, 0786, 1300, 5050}
2004/12/01
Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/11/29
Portable Contamination Monitor Group Provides a Lower Cost Alternative to Particle Counting {0781, 0784, 0786, 1300, 5050}
2004/12/01
Reuse And Salvage Guidelines
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Contamination Control Guidelines
Service Magazine
243-3133 Quick Connect Coupler (Fluid Sampling) Provides A Coupler for Portable Particle Analyzers {0707, 0717, 0731, 0732, 0738}
2004/07/01
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/11/29
Portable Contamination Monitor Group Provides a Lower Cost Alternative to Particle Counting {0781, 0784, 0786, 1300, 5050}
2004/12/01
Truck Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/11/29
Engine News
Contamination Control Guidelines
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Service Magazine
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2003/12/01
243-3133 Quick Connect Coupler (Fluid Sampling) Provides A Coupler for Portable Particle Analyzers {0707, 0717, 0731, 0732, 0738}
2004/07/01
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/11/29
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Reuse And Salvage Guidelines
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}

Truck sale:

Caterpillar 824C
 
Caterpillar 824C
- Wheel dozers
HOLT CAT
Caterpillar 824C, Wheel dozers, Construction
35,000 
Caterpillar 824C, Wheel dozers, Construction
- Wheel dozers
PETERSON TRACTOR CO
Caterpillar 824C, Wheel Loaders, Construction
12,501 
Caterpillar 824C, Wheel Loaders, Construction

MICHIGAN CAT
Caterpillar 824C, Construction
25,000 
Caterpillar 824C, Construction
- Dozers
WHAYNE SUPPLY COMPANY
Caterpillar 824C, Construction
 
Caterpillar 824C, Construction
- Wheel Loaders
GREGORY POOLE EQUIPMENT CO.