AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

C15 Engine Emissions Retrofit Repower Tier III For 825C, 826C Compactor And 824C Wheel Tractor 85X00001-UP (MACHINE) POWER TRAIN Caterpillar SIS



WHEEL DOZER 824C WHEEL DOZER 85X
 C15 Engine Emissions Retrofit Repower Tier III For 825C, 826C Compactor And 824C Wheel Tractor 85X00001-UP (MACHINE) SEBP4812 824C 85X   (1978)

Parts group 824C:

  For full view, you need register
POWER TRAIN
CONVERSION GP
308-7179 CONVERSION GP-POWER TRAIN
308-7179 CONVERSION GP-POWER TRAIN -REPOWER, OIL LINES
S/N 85X1-UP; 86X1-UP; 87X1-UP
PART OF 308-7173 CONVERSION AR-ENGINE
KIT
6V-1567 KIT-TRANSMISSION GASKET
6V-1567 KIT-TRANSMISSION GASKET
S/N 85X1-UP; 86X1-UP; 87X1-UP
TRANSMISSION CASE & PARTS
FIELD INSTALLATION
6V-5404 KIT-TRANSMISSION GASKET
6V-5404 KIT-TRANSMISSION GASKET
S/N 85X1-UP; 86X1-UP; 87X1-UP
FIELD INSTALLATION
LINES GP-POWER TRAIN OIL
308-7179 CONVERSION GP-POWER TRAIN
308-7179 CONVERSION GP-POWER TRAIN -REPOWER, OIL LINES
S/N 85X1-UP; 86X1-UP; 87X1-UP
PART OF 308-7173 CONVERSION AR-ENGINE
TRANSMISSION GP
6V-1567 KIT-TRANSMISSION GASKET
6V-1567 KIT-TRANSMISSION GASKET
S/N 85X1-UP; 86X1-UP; 87X1-UP
TRANSMISSION CASE & PARTS
FIELD INSTALLATION
6V-5404 KIT-TRANSMISSION GASKET
6V-5404 KIT-TRANSMISSION GASKET
S/N 85X1-UP; 86X1-UP; 87X1-UP
FIELD INSTALLATION
COOLER GP
COOLER & LINES GP
214-9045 COOLER & LINES GP
214-9045 COOLER & LINES GP -ENGINE, POWER TRAIN COOLERS
S/N TXG2726-UP; LHX15363-99999
308-7179 CONVERSION GP-POWER TRAIN
308-7179 CONVERSION GP-POWER TRAIN -REPOWER, OIL LINES
S/N 85X1-UP; 86X1-UP; 87X1-UP
PART OF 308-7173 CONVERSION AR-ENGINE

Information:

(For parts list, see above)

Special Instruction
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Decommissioning Procedure for Permanently Sealed Diaphragm Accumulators {5077}
Decommissioning Procedure for Permanently Sealed Diaphragm Accumulators {5077}
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Specifications
Axle Group (Fixed)
824C TRACTOR, 825C & 826C COMPACTORS POWER TRAIN
Axle Group (Oscillating)
824C TRACTOR, 825C & 826C COMPACTORS POWER TRAIN
Final Drives, Brakes And Wheels <BR> 824C
824C TRACTOR, 825C & 826C COMPACTORS POWER TRAIN
Final Drives, Brakes And Wheels <BR> 825C &amp; 826C
824C TRACTOR, 825C & 826C COMPACTORS POWER TRAIN
Wheel Bearing Adjustment <BR> 824C
824C TRACTOR, 825C & 826C COMPACTORS POWER TRAIN
Wheel Bearing Adjustment <BR> 825C &amp; 826C
824C TRACTOR, 825C & 826C COMPACTORS POWER TRAIN
Reuse And Salvage Guidelines
Planetary Final Drives for Wheel Loaders, Wheel Tractors, Compactors, Underground Articulated Trucks {4011, 4050, 4051}
Planetary Final Drives for Wheel Loaders, Wheel Tractors, Compactors, Underground Articulated Trucks {4011, 4050, 4051}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Thermal Spray Procedures for Wheel Loader Trunnion Support {0679, 3260, 3268}
Thermal Spray Procedures for Wheel Loader Trunnion Support {0679, 3260, 3268}
Thermal Spray Procedures for Wheel Dozer and Integrated Toolcarrier Axle Housing {0679, 3260}
Thermal Spray Procedures for Wheel Dozer and Integrated Toolcarrier Axle Housing {0679, 3260}
Thermal Spray Procedures for IT And Wheel Dozer Spindle {0679, 4205}
Thermal Spray Procedures for IT And Wheel Dozer Spindle {0679, 4205}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Disassembly and Assembly
Drive Axles (824C)
824C TRACTOR, 825C & 826C COMPACTORS POWER TRAIN
Drive Axles (825C, 826C)
824C TRACTOR, 825C & 826C COMPACTORS POWER TRAIN
Final Drive Carriers And Ring Gears (825C, 826C)
824C TRACTOR, 825C & 826C COMPACTORS POWER TRAIN
Final Drive Planet Carriers (824C)
824C TRACTOR, 825C & 826C COMPACTORS POWER TRAIN
Wheel Assemblies And Wheel Brake Assemblies (825C &amp; 826C)
824C TRACTOR, 825C & 826C COMPACTORS POWER TRAIN
Wheel Assemblies And Wheel Brake Assemblies (824C)
824C TRACTOR, 825C & 826C COMPACTORS POWER TRAIN
Front Axle Housing (825C, 826C)
824C TRACTOR, 825C & 826C COMPACTORS POWER TRAIN
Front Axle Housing (824C)
824C TRACTOR, 825C & 826C COMPACTORS POWER TRAIN
Rear Axle Housing (825C, 826C)
824C TRACTOR, 825C & 826C COMPACTORS POWER TRAIN
Rear Axle Housing (824C)
824C TRACTOR, 825C & 826C COMPACTORS POWER TRAIN
Front Support (825C, 826C)
824C TRACTOR, 825C & 826C COMPACTORS POWER TRAIN
Front Support (824C)
824C TRACTOR, 825C & 826C COMPACTORS POWER TRAIN
Rear Support (825C, 826C)
824C TRACTOR, 825C & 826C COMPACTORS POWER TRAIN
Rear Support (824C)
824C TRACTOR, 825C & 826C COMPACTORS POWER TRAIN
Service Magazine
New Plug Makes Removal And Installation Of Brake Piston Easier{0622,4251}
1980/09/01
Change To Lubricant Recommendations For Differential And Final Drives{3258,4070}
1981/08/10
New Spacers Used On Planet Gear Shafts In Final Drives{4092,4091,4055}
1982/08/16
Changes Made To Keep Wheel Bearing Retainer Plate Tight{4051,4053,4055,4251}
1983/09/26
Salvage Procedures For Final Drive Planet Carrier {4093,4092,4050}
1984/01/16
New Wheel Bearing Adjustment Procedure {4208}
1984/06/25
New Axle Shaft Is Stronger, More Durable{3259}
1991/02/04
New Seals And Retainers Improve Service Life Of The Front Axle Input Yoke And Rear Axle Input Yoke {3250}
1997/03/03
New Recommendations for Selecting the Oil Viscosity for the Differentials and Final Drives {3258, 4011, 4051, 7581}
2001/04/02
Product Information Guide, SEBF1015, "Improving Component Durability" , "Final Drives and Differentials" is now available {3258, 3282, 4050}
2008/12/29
New Wheel Bearing Adjustment Procedure {4051}
2005/05/30
New Plug Makes Removal And Installation Of Brake Piston Easier{0622,4251}
1980/09/01
Changes Made To Keep Wheel Bearing Retainer Plate Tight{4051,4053,4055,4251}
1983/09/26
Improved Spring Used To Prevent Adjuster Piston Sticking {4261,4251}
1996/06/10
Special Instruction
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Reuse And Salvage Guidelines
Repair of Web Cracks In Final Drive Planetary Carriers {4092}
Repair of Web Cracks In Final Drive Planetary Carriers {4092}
Planetary Final Drives for Wheel Loaders, Wheel Tractors, Compactors, Underground Articulated Trucks {4011, 4050, 4051}
Planetary Final Drives for Wheel Loaders, Wheel Tractors, Compactors, Underground Articulated Trucks {4011, 4050, 4051}
Special Instruction
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Reuse And Salvage Guidelines
Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}
Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}
Repair of Reaction Dowel Holes in Transmission Clutch Housings {3030, 3155, 3169}
Repair of Reaction Dowel Holes in Transmission Clutch Housings {3030, 3155, 3169}
Special Instruction
&quot;A Series&quot; Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Specifications
Transmission Hydraulic Controls
824C TRACTOR, 825C & 826C COMPACTORS POWER TRAIN
Selector And Pressure Control Valve For Transmission
824C TRACTOR, 825C & 826C COMPACTORS POWER TRAIN
Bench Test Procedures
Bench Test Procedure For A 824C Wheel Dozer, 825C Soil Compactor, and 826C Landfill Compactor Transmission {3030, 3073}
Bench Test Procedure For A 824C Wheel Dozer, 825C Soil Compactor, and 826C Landfill Compactor Transmission {3030, 3073}
Disassembly and Assembly
Transmission Hydraulic Control Valve
824C TRACTOR, 825C & 826C COMPACTORS POWER TRAIN
Service Magazine
Stronger Orifices Used In Control Valve{3167}
1982/02/15
New Manifold Assembly Provides Improved Transmission Lubrication{3176,3188}
1984/11/19
New Differential Spool Prevents Shift Hesitation In Power Shift Transmissions{3152,3167}
1988/01/04
Stronger Screened Modulation Orifices Used In Transmission Hydraulic Controls{3152}
1989/06/26
New Modulating Relief Valve Used In Transmission Hydraulic Controls {3152}
1989/08/07
Special Instruction
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Service Magazine
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30
Specifications
Differential And Bevel Gear <BR> (Front And Rear) 824C
824C TRACTOR, 825C & 826C COMPACTORS POWER TRAIN
Differential And Bevel Gear <BR> (Front And Rear) 825C &amp; 826C
824C TRACTOR, 825C & 826C COMPACTORS POWER TRAIN
Differentials
824C TRACTOR, 825C & 826C COMPACTORS POWER TRAIN
Tool Operating Manual
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
Reuse And Salvage Guidelines
Differential Housing Components for Wheel Loaders, Articulated Trucks, Wheel Tractors, Compactors, Integrated Toolcarriers, and Motor Graders {3258, 3284}
Differential Housing Components for Wheel Loaders, Articulated Trucks, Wheel Tractors, Compactors, Integrated Toolcarriers, and Motor Graders {3258, 3284}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Thermal Spray Procedures of Differential Carrier Assemblies for Wheel Loader, Wheel Dozer, Compactor, Integrated Toolcarrier, Articulated Truck, and Wheel Tractor Scraper (WTS) {0679, 3284}
Thermal Spray Procedures of Differential Carrier Assemblies for Wheel Loader, Wheel Dozer, Compactor, Integrated Toolcarrier, Articulated Truck, and Wheel Tractor Scraper (WTS) {0679, 3284}
Thermal Spray Procedures for Wheel Loaders, Off-Highway Trucks and Tractors, Articulated Trucks, Wheel Tractors, Compactors, and Integrated Toolcarriers Differential - Support Bearing Journal {0679, 3258, 3284}
Thermal Spray Procedures for Wheel Loaders, Off-Highway Trucks and Tractors, Articulated Trucks, Wheel Tractors, Compactors, and Integrated Toolcarriers Differential - Support Bearing Journal {0679, 3258, 3284}
Thermal Spray Procedures for Wheel Loaders, Articulated Trucks, Wheel Tractors, Compactors, and Integrated Toolcarriers Differential Case - Flange End {0679, 3258, 3284}
Thermal Spray Procedures for Wheel Loaders, Articulated Trucks, Wheel Tractors, Compactors, and Integrated Toolcarriers Differential Case - Flange End {0679, 3258, 3284}
Contamination Control Guidelines
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Disassembly and Assembly
Front Differential And Bevel Gear (825C, 826C)
824C TRACTOR, 825C & 826C COMPACTORS POWER TRAIN
Rear Differential And Bevel Gear (825C, 826C)
824C TRACTOR, 825C & 826C COMPACTORS POWER TRAIN
Front Differential And Bevel Gear (824C)
824C TRACTOR, 825C & 826C COMPACTORS POWER TRAIN
Rear Differential and Bevel (824C)
824C TRACTOR, 825C & 826C COMPACTORS POWER TRAIN
Differential And Bevel Gear (825C, 826C)
824C TRACTOR, 825C & 826C COMPACTORS POWER TRAIN
Differential And Bevel Gear (824C)
824C TRACTOR, 825C & 826C COMPACTORS POWER TRAIN
Service Magazine
Change To Lubricant Recommendations For Differential And Final Drives{3258,4070}
1981/08/10
Replace Certain Differential Carrier Assembly Cap Bolts{3258,3250}
1986/08/18
Use Pinion Rotating Torque And Nut Advance To Set Bearing Preloads And Bevel Gear Backlash{3254,3258,3280}
1987/04/20
3.5&quot;, 4.0&quot;, 5.5&quot;, 5.75&quot; Socket Wrenches Available For Removal Of Differential Pinion Shaft Nuts{0601,3258}
1988/03/14
Lubrication Hole Removed From Differential Pinion Shaft{3254,3280}
1989/01/09
New Seal Retainer In Differential And Bevel Gear Groups{3280}
1989/09/11
Improved Seal Used Around Differential Yokes{3258,3280}
1989/10/02
New Seal Used for Drive Shaft Yoke in Differential and Bevel Gear Groups{3258,3250,3269}
1989/10/30
New Recommendations for Selecting the Oil Viscosity for the Differentials and Final Drives {3258, 4011, 4051, 7581}
2001/04/02
Use <NOBR> 1U-9891</NOBR> Hydraulic Oil Additive to Eliminate Brake Chatter and Reduce Noise in the Limited Slip Differential {3263, 5095}
2008/10/27
Tool Operating Manual
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
Reuse And Salvage Guidelines
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Thermal Spray Procedures for Differential Case - Housing Face & Pinion Thrust Face {3283}
Thermal Spray Procedures for Differential Case - Housing Face & Pinion Thrust Face {3283}
Contamination Control Guidelines
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Service Magazine
Replace Certain Differential Carrier Assembly Cap Bolts{3258,3250}
1986/08/18
3.5&quot;, 4.0&quot;, 5.5&quot;, 5.75&quot; Socket Wrenches Available For Removal Of Differential Pinion Shaft Nuts{0601,3258}
1988/03/14
New Seal Retainer In Differential And Bevel Gear Groups{3280}
1989/09/11
Product Information Guide, SEBF1015, "Improving Component Durability" , "Final Drives and Differentials" is now available {3258, 3282, 4050}
2008/12/29
Special Instruction
Cracking and/or Breaking of Torque Converter and Transfer Gear Cases{3101, 3159, 3176}
Cracking and/or Breaking of Torque Converter and Transfer Gear Cases{3101, 3159, 3176}
Tool Operating Manual
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Reuse And Salvage Guidelines
Repair of Web Cracks In Final Drive Planetary Carriers {4092}
Repair of Web Cracks In Final Drive Planetary Carriers {4092}
Service Magazine
Improved Lubrication For Pump Drive Splines In Torque Converter{3108}
1981/08/03
Improved Lubrication For Pump Drive Splines In Torque Converter{3108}
1982/06/07
Output Transfer Gear Case Bearings Have More Capacity{3159,3176}
1982/08/16
New Components Used In Governor And Fuel Pump Drive Group{1288}
1996/02/12
Special Instruction REHS0006 Available For Installation Of Output Yoke And Screen Housing On Remanufactured Transmissions {3159,3002}
1997/01/27
Improved Drive Gears Increase Torque Converter Service Life {3101,3108}
1997/11/10
Improved 5P3000 Engine And Transmission Shipping Stand Assembly; Modification Available For Stands Already In Use{0640}
1977/04/25
Tool Operating Manual
345-1236 Lifting Bracket{0599, 0629, 0632, 6605}
345-1236 Lifting Bracket{0599, 0629, 0632, 6605}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Special Instruction
Guidelines for the Use of Clean Out Filters for the Hydraulic Oil System and for the Power Train Oil System{3067, 5068}
Guidelines for the Use of Clean Out Filters for the Hydraulic Oil System and for the Power Train Oil System{3067, 5068}
Specifications
Primary Fuel Filter
3406C ENGINE FOR CATERPILLAR BUILT MACHINES
Fuel Filter Base
3406C ENGINE FOR CATERPILLAR BUILT MACHINES
Oil Filter
3406C ENGINE FOR CATERPILLAR BUILT MACHINES
Transmission Oil Filter
824C TRACTOR, 825C & 826C COMPACTORS POWER TRAIN
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Disassembly and Assembly
Transmission Oil Filter
824C TRACTOR, 825C & 826C COMPACTORS POWER TRAIN
Service Magazine
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2003/12/01
Optional High Efficiency Filters Are Now Available {3004, 5068}
2003/07/07
Understanding Transmission Filter Plugging Events {3004, 3067}
2007/04/02
New Oil Filters for all Cat Machines are Available {3004, 3067, 4295, 431F, 5068}
New Oil Filters for all Cat Machines are Available {3004, 3067, 4295, 431F, 5068}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Special Instruction
Cracking and/or Breaking of Torque Converter and Transfer Gear Cases{3101, 3159, 3176}
Cracking and/or Breaking of Torque Converter and Transfer Gear Cases{3101, 3159, 3176}
Installation Of 3T7389 Transfer Gear Case Assembly, 6P8830 Transmission Case Assembly Or 7G7139 Manifold Assembly{3150}
Installation Of 3T7389 Transfer Gear Case Assembly, 6P8830 Transmission Case Assembly Or 7G7139 Manifold Assembly{3150}
Installation of Output Yoke and Screen Housing On Remanufactured Transmissions{3002, 3159}
Installation of Output Yoke and Screen Housing On Remanufactured Transmissions{3002, 3159}
Modification Of Gear For Use In The Output Transfer Case and Gear Group {3075, 3159}
Modification Of Gear For Use In The Output Transfer Case and Gear Group {3075, 3159}
Specifications
Transfer Gears <BR> (Output)
824C TRACTOR, 825C & 826C COMPACTORS POWER TRAIN
Tool Operating Manual
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Reuse And Salvage Guidelines
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Salvage of Transmission Transfer Gear Case and Cover for Articulated Trucks, Compactors, Load Haul Dump, Wheel Loaders, Wheel Tractors, and Motor Graders {3075, 3159}
Salvage of Transmission Transfer Gear Case and Cover for Articulated Trucks, Compactors, Load Haul Dump, Wheel Loaders, Wheel Tractors, and Motor Graders {3075, 3159}
Disassembly and Assembly
Front Differential And Bevel Gear (825C, 826C)
824C TRACTOR, 825C & 826C COMPACTORS POWER TRAIN
Rear Differential And Bevel Gear (825C, 826C)
824C TRACTOR, 825C & 826C COMPACTORS POWER TRAIN
Front Differential And Bevel Gear (824C)
824C TRACTOR, 825C & 826C COMPACTORS POWER TRAIN
Differential And Bevel Gear (825C, 826C)
824C TRACTOR, 825C & 826C COMPACTORS POWER TRAIN
Differential And Bevel Gear (824C)
824C TRACTOR, 825C & 826C COMPACTORS POWER TRAIN
Torque Converter, Transmission And Transfer Gears
824C TRACTOR, 825C & 826C COMPACTORS POWER TRAIN
Transfer Gears
824C TRACTOR, 825C & 826C COMPACTORS POWER TRAIN
Service Magazine
Improved Lubrication For Pump Drive Splines In Torque Converter{3108}
1981/08/03
Output Transfer Gear Case Bearings Have More Capacity{3159,3176}
1982/08/16
Use Pinion Rotating Torque And Nut Advance To Set Bearing Preloads And Bevel Gear Backlash{3254,3258,3280}
1987/04/20
New Seal Retainer In Differential And Bevel Gear Groups{3280}
1989/09/11
New Seal Used for Drive Shaft Yoke in Differential and Bevel Gear Groups{3258,3250,3269}
1989/10/30
New Components Used In Governor And Fuel Pump Drive Group{1288}
1996/02/12
Special Instruction REHS0006 Available For Installation Of Output Yoke And Screen Housing On Remanufactured Transmissions {3159,3002}
1997/01/27
Replacement Covers for the Transfer Gear Cases are Available {3159}
2002/11/18
Updating Transfer Gear Groups With New Bearings {3159}
2003/12/01
Improvement to the Seal Reduces Leaks in the Transfer Case {3159}
2004/01/26
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Tool Operating Manual
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Reuse And Salvage Guidelines
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Service Magazine
New Components Used In Governor And Fuel Pump Drive Group{1288}
1996/02/12
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Special Instruction
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
Reuse And Salvage Guidelines
Replacing Tubes In Housings That Are Installed With Mechanical Joints (Expanded and Welded) {3016, 3154, 4104, 4133, 5057}
Replacing Tubes In Housings That Are Installed With Mechanical Joints (Expanded and Welded) {3016, 3154, 4104, 4133, 5057}
Special Instruction
Hose and Coupling Assembly and Repair Process Guide{0684, 3016, 3103, 3154, 4133, 4257, 4304, 5057, 7554}
Hose and Coupling Assembly and Repair Process Guide{0684, 3016, 3103, 3154, 4133, 4257, 4304, 5057, 7554}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
Service Magazine
New Transmission Pump Suction Hose Assembly Replaces Tube Assembly In Power Train Oil Lines Group{3016,3017,3153}
1991/02/04
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2003/12/01
Reuse And Salvage Guidelines
Replacing Tubes In Housings That Are Installed With Mechanical Joints (Expanded and Welded) {3016, 3154, 4104, 4133, 5057}
Replacing Tubes In Housings That Are Installed With Mechanical Joints (Expanded and Welded) {3016, 3154, 4104, 4133, 5057}
Special Instruction
Installation Of 3T7389 Transfer Gear Case Assembly, 6P8830 Transmission Case Assembly Or 7G7139 Manifold Assembly{3150}
Installation Of 3T7389 Transfer Gear Case Assembly, 6P8830 Transmission Case Assembly Or 7G7139 Manifold Assembly{3150}
Installation Of 6T6051 Manifold Assembly{3150}
Installation Of 6T6051 Manifold Assembly{3150}
Technical Information Bulletin
Transmission Charge Pump Centerbodies Can Be Modified To Improve The Life Of Pumps With 8-Tooth, Powder Metal Gears
Transmission Charge Pump Centerbodies Can Be Modified To Improve The Life Of Pumps With 8-Tooth, Powder Metal Gears
Service Magazine
New Bonnet Used On Transmission Oil Cooler; Bracket Holds Bonnet To Oil Pan{1375,1302}
1980/02/04
Improved Lubrication For Pump Drive Splines In Torque Converter{3108}
1981/08/03
Change To Lubricant Recommendations For Differential And Final Drives{3258,4070}
1981/08/10
Stronger Orifices Used In Control Valve{3167}
1982/02/15
Improved Lubrication For Pump Drive Splines In Torque Converter{3108}
1982/06/07
New Spacers Used On Planet Gear Shafts In Final Drives{4092,4091,4055}
1982/08/16
Output Transfer Gear Case Bearings Have More Capacity{3159,3176}
1982/08/16
New Core Assembly Used In Transmission Oil Cooler{1375}
1983/05/23
Changes Made To Keep Wheel Bearing Retainer Plate Tight{4051,4053,4055,4251}
1983/09/26
New Rod And Seal Used To Prevent Oil Leakage Into The Transmission Neutralizer Group{3181}
1983/10/17
Salvage Procedures For Final Drive Planet Carrier {4093,4092,4050}
1984/01/16
New Spider And Bearing Group And New Bolts Used In Drive Shaft Groups{3251,3253,3250}
1985/06/03
Improved Bearing Retention In Planetary Group{3150}
1985/11/25
Stronger Drivers Used With Demountable Rims{4202,4203}
1986/10/13
Improved 5P3000 Engine And Transmission Shipping Stand Assembly; Modification Available For Stands Already In Use{0640}
1977/04/25
Use Pinion Rotating Torque And Nut Advance To Set Bearing Preloads And Bevel Gear Backlash{3254,3258,3280}
1987/04/20
New Differential Spool Prevents Shift Hesitation In Power Shift Transmissions{3152,3167}
1988/01/04
Higher Capacity Bearing Used In Planetary Groups Of Power Shift Transmissions{3176}
1979/05/14
Use Caution To Prevent Damage To Plastic Check Valve In Hydraulic Oil Tank And Transmission Oil Tank Drain{5056,3177}
1979/09/03
New Ball Bearings With Nylon Cages Used In Some Planetary Groups In Power Shift Transmissions{3190,3169,3170}
1989/03/20
Stronger Screened Modulation Orifices Used In Transmission Hydraulic Controls{3152}
1989/06/26
New Seal Used for Drive Shaft Yoke in Differential and Bevel Gear Groups{3258,3250,3269}
1989/10/30
Correct Handling And Replacement of 3T6962 Pressure Switch Assembly{7332}
1990/12/10
New Axle Shaft Is Stronger, More Durable{3259}
1991/02/04
Special Instruction
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Bench Test Procedures
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Specifications
Transmission Neutralizer Group
824C TRACTOR, 825C & 826C COMPACTORS POWER TRAIN
Disassembly and Assembly
Transmission Neutralizer Group
824C TRACTOR, 825C & 826C COMPACTORS POWER TRAIN
Transmission Neutralizer Group
824C TRACTOR, 825C & 826C COMPACTOR VEHICLE SYSTEMS
Service Magazine
New Rod And Seal Used To Prevent Oil Leakage Into The Transmission Neutralizer Group{3181}
1983/10/17
Special Instruction
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Reuse And Salvage Guidelines
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Service Magazine
Improved Registration Process for Retrofit Products {1000, 3000, 7000, 7570}
2011/02/17
Special Instruction
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Technical Information Bulletin
Transmission Charge Pump Centerbodies Can Be Modified To Improve The Life Of Pumps With 8-Tooth, Powder Metal Gears
Transmission Charge Pump Centerbodies Can Be Modified To Improve The Life Of Pumps With 8-Tooth, Powder Metal Gears
Specifications
Transmission Oil Pump
824C TRACTOR, 825C & 826C COMPACTORS POWER TRAIN
Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Hydraulic Gear Pumps Used in Transmissions {3066, 5073}
Hydraulic Gear Pumps Used in Transmissions {3066, 5073}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Hydraulic Piston Pumps Used in Certain Models of Caterpillar Equipment{3203, 5070, 5084}
Hydraulic Piston Pumps Used in Certain Models of Caterpillar Equipment{3203, 5070, 5084}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Thermal Spray Procedures for Tyrone Drive Shaft (Pump Gear){0679, 3066, 5073}
Thermal Spray Procedures for Tyrone Drive Shaft (Pump Gear){0679, 3066, 5073}
Bench Test Procedures
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Hydraulic Piston Pumps {5070}
Bench Test Procedure for Hydraulic Piston Pumps {5070}
Disassembly and Assembly
Transmission Charging Pump
824C TRACTOR, 825C & 826C COMPACTORS POWER TRAIN
Service Magazine
New Hydraulic Pump Pressure Plates are Now Available for Certain Large Wheel Loaders, Wheel Dozers, and Compactors {5073}
New Hydraulic Pump Pressure Plates are Now Available for Certain Large Wheel Loaders, Wheel Dozers, and Compactors {5073}
Special Instruction
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Service Magazine
Final Drive Duo-Cone Seal Assembly Information Update {7561}
2010/04/15
Specifications
Drive Shaft <BR> (Transfer Gear To Front Differential)
824C TRACTOR, 825C & 826C COMPACTORS POWER TRAIN
Drive Shaft <BR> (Transfer Gear To Rear Differential)
824C TRACTOR, 825C & 826C COMPACTORS POWER TRAIN
Reuse And Salvage Guidelines
Universal Joints and Drive Shafts {3108, 3251, 3253}
Universal Joints and Drive Shafts {3108, 3251, 3253}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Disassembly and Assembly
Front Drive Shaft
824C TRACTOR, 825C & 826C COMPACTORS POWER TRAIN
Power Train Guard
824C TRACTOR, 825C & 826C COMPACTORS POWER TRAIN
Center Drive Shaft
824C TRACTOR, 825C & 826C COMPACTORS POWER TRAIN
Rear Drive Shaft
824C TRACTOR, 825C & 826C COMPACTORS POWER TRAIN
Service Magazine
New Spider And Bearing Group And New Bolts Used In Drive Shaft Groups{3251,3253,3250}
1985/06/03
New Seal Used for Drive Shaft Yoke in Differential and Bevel Gear Groups{3258,3250,3269}
1989/10/30
Driveshaft Dust Cups Now Serviceable{3253}
1995/08/21
A New Addition to the Torque Procedure for the Drive Shaft Bolts {3253}
2000/02/07
Correction to the Torque Procedure for the Drive Shaft Bolts {3253}
2001/04/02
Reuse And Salvage Guidelines
Universal Joints and Drive Shafts {3108, 3251, 3253}
Universal Joints and Drive Shafts {3108, 3251, 3253}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Service Magazine
Use Caution To Prevent Damage To Plastic Check Valve In Hydraulic Oil Tank And Transmission Oil Tank Drain{5056,3177}
1979/09/03
243-3133 Quick Connect Coupler (Fluid Sampling) Provides A Coupler for Portable Particle Analyzers {0707, 0717, 0731, 0732, 0738}
2004/07/01
Truck Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/11/29
New Infrared Thermometer Has Narrow, 50:1 Target Ratio, Wide Temperature Range {0776, 1350, 3000, 4000, 4150, 4250}
2006/03/27
Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/11/29
Special Instruction
Use of 8T5200 Signal Generator/Counter Group{0778, 0783, 0785}
Use of 8T5200 Signal Generator/Counter Group{0778, 0783, 0785}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Rim Inspection Guidelines {4202, 4209}
Rim Inspection Guidelines {4202, 4209}
Hose Inspection Form {0374, 0599, 5057, 5057}
Hose Inspection Form {0374, 0599, 5057, 5057}
Tool Operating Manual
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
142-1664 Adjustable Lifting Bracket Group{0599, 0629, 0700, 0729, 0757, 1122}
142-1664 Adjustable Lifting Bracket Group{0599, 0629, 0700, 0729, 0757, 1122}
Base-Mounted Recirculating Parts Washers{0374, 0599, 0680, 0699, 0700}
Base-Mounted Recirculating Parts Washers{0374, 0599, 0680, 0699, 0700}
362-0960 Lifting Beam Assembly {0599, 0629, 0700, 0729, 0757, 1122}
362-0960 Lifting Beam Assembly {0599, 0629, 0700, 0729, 0757, 1122}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
<NOBR>439-3938</NOBR>, <NOBR>439-3939</NOBR>, <NOBR>439-3940</NOBR>, <NOBR>439-3941</NOBR>, <NOBR>439-3942</NOBR>, <NOBR>439-3943</NOBR> Link Bracket Assemblies {0374, 0599, 0632, 0700, 7000}
439-3938, 439-3939, 439-3940, 439-3941, 439-3942, 439-3943 Link Bracket Assemblies {0374, 0599, 0632, 0700, 7000}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
420-2048 Adjustable C-Frame Assembly{0629, 0632, 0738, 4000, 5050, 7000}
420-2048 Adjustable C-Frame Assembly{0629, 0632, 0738, 4000, 5050, 7000}
HVOF Identifier 396-9342 Group{0599, 0669, 0679, 7000}
HVOF Identifier 396-9342 Group{0599, 0669, 0679, 7000}
4-Inch Radial Hose Machine{0374, 0599, 0684, 0738, 5057}
4-Inch Radial Hose Machine{0374, 0599, 0684, 0738, 5057}
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
Procedures for Using the 212-1503 Portable Parts Washer{0374, 0599, 0680, 0699, 0700}
Procedures for Using the 212-1503 Portable Parts Washer{0374, 0599, 0680, 0699, 0700}
Using the 223-2105 Hose Cutting Machine{0374, 0599, 0678, 0684, 0708, 0738, 5057, 6060}
Using the 223-2105 Hose Cutting Machine{0374, 0599, 0678, 0684, 0708, 0738, 5057, 6060}
Crimping XT-3 ES and XT-5 S4G, MCSH, and MCSX Couplings Using 4C-3660, 4C-5052, 4C-5053, 9U-5792, or 9U-7261 Hose Machines{0374, 0599, 0684, 0738, 5057}
Crimping XT-3 ES and XT-5 S4G, MCSH, and MCSX Couplings Using 4C-3660, 4C-5052, 4C-5053, 9U-5792, or 9U-7261 Hose Machines{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
456-4449 Support Device{0374, 0599, 0629, 0632, 0700}
456-4449 Support Device{0374, 0599, 0629, 0632, 0700}
Installing 457-6030 (C3-290 Controller) on Hose Crimping Machines 233-8048, 286-4354, 286-4355, 275-6199, 286-4353, and 233-8038{0374, 0599, 0684, 0700, 0738, 5057}
Installing 457-6030 (C3-290 Controller) on Hose Crimping Machines 233-8048, 286-4354, 286-4355, 275-6199, 286-4353, and 233-8038{0374, 0599, 0684, 0700, 0738, 5057}
442-1750 Lifting Plate{0374, 0599, 0629, 0632, 0700, 1122}
442-1750 Lifting Plate{0374, 0599, 0629, 0632, 0700, 1122}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}
Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Contamination Control Guidelines
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Service Magazine
Extraction Tools For &quot;Live Oil Sampling&quot;{7770,0770,0781,0783,0784}
1988/04/18
Installation Of Valves For Live Oil Sampling{7770,0770,0781,0783,0784}
1988/06/06
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/11/29
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Special Instruction
Cracking and/or Breaking of Torque Converter and Transfer Gear Cases{3101, 3159, 3176}
Cracking and/or Breaking of Torque Converter and Transfer Gear Cases{3101, 3159, 3176}
Specifications
Torque Converter
824C TRACTOR, 825C & 826C COMPACTORS POWER TRAIN
Pump Drive
824C TRACTOR, 825C & 826C COMPACTORS POWER TRAIN
Reuse And Salvage Guidelines
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Salvage of Center Bearing in Torque Converter Input Housing {3101, 3127}
Salvage of Center Bearing in Torque Converter Input Housing {3101, 3127}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Cast Aluminum Stator Wheels for Torque Converters {3101, 3129}
Cast Aluminum Stator Wheels for Torque Converters {3101, 3129}
Repair of Pump Drive Gears for Torque Converters {3100, 3101}
Repair of Pump Drive Gears for Torque Converters {3100, 3101}
Turbine Wheel for Torque Converters Used with Power Shift Transmissions {3101, 3131}
Turbine Wheel for Torque Converters Used with Power Shift Transmissions {3101, 3131}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Reusability Inspection of Seal Ring and Stator Carrier Assemblies for Certain Models {0760, 0761, 3101, 3129, 3160, 7555}
Reusability Inspection of Seal Ring and Stator Carrier Assemblies for Certain Models {0760, 0761, 3101, 3129, 3160, 7555}
Thermal Spray Procedures for Torque Converter Turbine Wheel {0679, 3101, 3131}
Thermal Spray Procedures for Torque Converter Turbine Wheel {0679, 3101, 3131}
Thermal Spray Procedures for Torque Converter Impeller {0679, 3101, 3134}
Thermal Spray Procedures for Torque Converter Impeller {0679, 3101, 3134}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Torque Converter Carrier - Seal Ring Bore {0374, 0599, 0679, 3101, 3135}
Thermal Spray Procedures for Torque Converter Carrier - Seal Ring Bore {0374, 0599, 0679, 3101, 3135}
Thermal Spray Procedures for Torque Converter Input Housing {0679, 3101, 3127}
Thermal Spray Procedures for Torque Converter Input Housing {0679, 3101, 3127}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Bench Test Procedures
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Disassembly and Assembly
Torque Converter
824C TRACTOR, 825C & 826C COMPACTORS POWER TRAIN
Torque Converter, Transmission And Transfer Gears
824C TRACTOR, 825C & 826C COMPACTORS POWER TRAIN
Torque Converter Outlet Relief Valve
824C TRACTOR, 825C & 826C COMPACTORS POWER TRAIN
Service Magazine
Improved Lubrication For Pump Drive Splines In Torque Converter{3108}
1981/08/03
Improved Lubrication For Pump Drive Splines In Torque Converter{3108}
1982/06/07
Improved Corrosion Inhibiting Procedure Used For Remanufactured Transmissions And Torque Converters {3001}
1997/03/03
Improved Drive Gears Increase Torque Converter Service Life {3101,3108}
1997/11/10
Recommendations for Rebuilding Torque Converter Freewheel Stators on All Cat Products {3101, 3129}
2014/11/13
Reuse And Salvage Guidelines
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Service Magazine
Recommendations for Rebuilding Torque Converter Freewheel Stators on All Cat Products {3101, 3129}
2014/11/13
Special Instruction
Cracking and/or Breaking of Torque Converter and Transfer Gear Cases{3101, 3159, 3176}
Cracking and/or Breaking of Torque Converter and Transfer Gear Cases{3101, 3159, 3176}
Installation Of 3T7389 Transfer Gear Case Assembly, 6P8830 Transmission Case Assembly Or 7G7139 Manifold Assembly{3150}
Installation Of 3T7389 Transfer Gear Case Assembly, 6P8830 Transmission Case Assembly Or 7G7139 Manifold Assembly{3150}
Installation Of 6T6051 Manifold Assembly{3150}
Installation Of 6T6051 Manifold Assembly{3150}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Technical Information Bulletin
Transmission Charge Pump Centerbodies Can Be Modified To Improve The Life Of Pumps With 8-Tooth, Powder Metal Gears
Transmission Charge Pump Centerbodies Can Be Modified To Improve The Life Of Pumps With 8-Tooth, Powder Metal Gears
Specifications
Engine And Transmission Support (980C Wheel Loader)
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Transmission
824C TRACTOR, 825C & 826C COMPACTORS POWER TRAIN
Transfer Gears <BR> (Output)
824C TRACTOR, 825C & 826C COMPACTORS POWER TRAIN
Tool Operating Manual
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Reuse And Salvage Guidelines
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}
Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}
Transmission Clutch Plates and Disc Assemblies with Rayflex Friction Material {3030, 3155, 3190}
Transmission Clutch Plates and Disc Assemblies with Rayflex Friction Material {3030, 3155, 3190}
Transmission Clutch Plates and Disc Assemblies with F37 and F37X Friction Material {3030, 3155, 3190}
Transmission Clutch Plates and Disc Assemblies with F37 and F37X Friction Material {3030, 3155, 3190}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Transmission Reuse and Salvage Manual Contents {0374, 3030}
Transmission Reuse and Salvage Manual Contents {0374, 3030}
Clutch Ring Gears For All Power Shift Transmissions {3030, 3155}
Clutch Ring Gears For All Power Shift Transmissions {3030, 3155}
Procedure to Salvage Tang Slots on Transmission and Brake Pistons {0679, 3160, 4011, 4251}
Procedure to Salvage Tang Slots on Transmission and Brake Pistons {0679, 3160, 4011, 4251}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Reusability Inspection of Seal Ring and Stator Carrier Assemblies for Certain Models {0760, 0761, 3101, 3129, 3160, 7555}
Reusability Inspection of Seal Ring and Stator Carrier Assemblies for Certain Models {0760, 0761, 3101, 3129, 3160, 7555}
Reuse and Salvage of Transmission Components {3030}
Reuse and Salvage of Transmission Components {3030}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Repair of Reaction Dowel Holes in Transmission Clutch Housings {3030, 3155, 3169}
Repair of Reaction Dowel Holes in Transmission Clutch Housings {3030, 3155, 3169}
Thermal Spray Procedures for Clutch Housing Piston Bore {0679, 3160, 3169}
Thermal Spray Procedures for Clutch Housing Piston Bore {0679, 3160, 3169}
Thermal Spray Procedures for Clutch Piston Inside Diameter {0679, 3160, 3170}
Thermal Spray Procedures for Clutch Piston Inside Diameter {0679, 3160, 3170}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Testing and Adjusting
Testing And Adjusting
824C TRACTOR, 825C & 826C COMPACTORS POWER SHIFT TRANSMISSIO
Bench Test Procedures
Bench Test Procedure For A 824C Wheel Dozer, 825C Soil Compactor, and 826C Landfill Compactor Transmission {3030, 3073}
Bench Test Procedure For A 824C Wheel Dozer, 825C Soil Compactor, and 826C Landfill Compactor Transmission {3030, 3073}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Disassembly and Assembly
Torque Converter
824C TRACTOR, 825C & 826C COMPACTORS POWER TRAIN
Transmission Support Assembly (825C, 826C)
824C TRACTOR, 825C & 826C COMPACTORS POWER TRAIN
Torque Converter, Transmission And Transfer Gears
824C TRACTOR, 825C & 826C COMPACTORS POWER TRAIN
Transmission
824C TRACTOR, 825C & 826C COMPACTORS POWER TRAIN
Transfer Gears
824C TRACTOR, 825C & 826C COMPACTORS POWER TRAIN
Service Magazine
New Bonnet Used On Transmission Oil Cooler; Bracket Holds Bonnet To Oil Pan{1375,1302}
1980/02/04
New Core Assembly Used In Transmission Oil Cooler Group{1375}
1981/12/07
Output Transfer Gear Case Bearings Have More Capacity{3159,3176}
1982/08/16
New Core Assembly Used In Transmission Oil Cooler{1375}
1983/05/23
Improved Discs Used In No. 5 Rotating Clutch Of Transmission {3155,3150}
1984/06/25
New Manifold Assembly Provides Improved Transmission Lubrication{3176,3188}
1984/11/19
Improved Bearing Retention In Planetary Group{3150}
1985/11/25
Do Not Remove External Lube Line On Major Component Exchange Transmissions{3176,3188}
1986/11/24
Improved 5P3000 Engine And Transmission Shipping Stand Assembly; Modification Available For Stands Already In Use{0640}
1977/04/25
New Retaining Rings Used In Planetary Groups For Power Shift Transmissions{3176,3150}
1979/04/23
Higher Capacity Bearing Used In Planetary Groups Of Power Shift Transmissions{3176}
1979/05/14
Use Caution To Prevent Damage To Plastic Check Valve In Hydraulic Oil Tank And Transmission Oil Tank Drain{5056,3177}
1979/09/03
New Ball Bearings With Nylon Cages Used In Some Planetary Groups In Power Shift Transmissions{3190,3169,3170}
1989/03/20
Stronger Screened Modulation Orifices Used In Transmission Hydraulic Controls{3152}
1989/06/26
New Modulating Relief Valve Used In Transmission Hydraulic Controls {3152}
1989/08/07
Special Instruction REHS0006 Available For Installation Of Output Yoke And Screen Housing On Remanufactured Transmissions {3159,3002}
1997/01/27
Improved Corrosion Inhibiting Procedure Used For Remanufactured Transmissions And Torque Converters {3001}
1997/03/03
Clutch Plates Should be Inspected and the Clutch Plates Should be Circumferentially Ground {3190}
2002/04/29
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Improved Registration Process for Retrofit Products {1000, 3000, 7000, 7570}
2011/02/17
Cat&reg; Reman Announces the Addition of Transmission Clutch Plates for Certain Machine Transmissions {3160}
Cat® Reman Announces the Addition of Transmission Clutch Plates for Certain Machine Transmissions {3160}
New Differential Spool Prevents Shift Hesitation In Power Shift Transmissions{3152,3167}
1988/01/04
New Modulating Relief Valve Used In Transmission Hydraulic Controls {3152}
1989/08/07
Truck Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/11/29
Engine News
Contamination Control Guidelines
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Service Magazine
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2003/12/01
243-3133 Quick Connect Coupler (Fluid Sampling) Provides A Coupler for Portable Particle Analyzers {0707, 0717, 0731, 0732, 0738}
2004/07/01
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/11/29
New Differential Spool Prevents Shift Hesitation In Power Shift Transmissions{3152,3167}
1988/01/04
Stronger Screened Modulation Orifices Used In Transmission Hydraulic Controls{3152}
1989/06/26
New Differential Spool Prevents Shift Hesitation In Power Shift Transmissions{3152,3167}
1988/01/04
Specifications
Relief Valve For Converter Outlet
824C TRACTOR, 825C & 826C COMPACTORS POWER TRAIN
Reuse And Salvage Guidelines
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Bench Test Procedures
Disassembly and Assembly
Torque Converter Outlet Relief Valve
824C TRACTOR, 825C & 826C COMPACTORS POWER TRAIN
Service Magazine
New Modulating Relief Valve Used In Transmission Hydraulic Controls {3152}
1989/08/07
Specifications
Selector And Pressure Control Valve For Transmission
824C TRACTOR, 825C & 826C COMPACTORS POWER TRAIN
Service Magazine
New Differential Spool Prevents Shift Hesitation In Power Shift Transmissions{3152,3167}
1988/01/04
A New Coil Assembly is Now Used {5479}
2011/05/04
Specifications
Transmission Hydraulic Controls
824C TRACTOR, 825C & 826C COMPACTORS POWER TRAIN
Selector And Pressure Control Valve For Transmission
824C TRACTOR, 825C & 826C COMPACTORS POWER TRAIN
Bench Test Procedures
Bench Test Procedure For A 824C Wheel Dozer, 825C Soil Compactor, and 826C Landfill Compactor Transmission {3030, 3073}
Bench Test Procedure For A 824C Wheel Dozer, 825C Soil Compactor, and 826C Landfill Compactor Transmission {3030, 3073}
Service Magazine
Stronger Orifices Used In Control Valve{3167}
1982/02/15
New Differential Spool Prevents Shift Hesitation In Power Shift Transmissions{3152,3167}
1988/01/04
Stronger Screened Modulation Orifices Used In Transmission Hydraulic Controls{3152}
1989/06/26
New Modulating Relief Valve Used In Transmission Hydraulic Controls {3152}
1989/08/07
Tool Operating Manual
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
Reuse And Salvage Guidelines
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Repair of Web Cracks In Final Drive Planetary Carriers {4092}
Repair of Web Cracks In Final Drive Planetary Carriers {4092}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Service Magazine
Salvage Procedures For Final Drive Planet Carrier {4093,4092,4050}
1984/01/16
Special Instruction
Installation Guide for the Tire Monitoring System on Cat<SUP>&reg;</SUP> and Non-Cat Equipment {4203, 7490}
Installation Guide for the Tire Monitoring System on Cat® and Non-Cat Equipment {4203, 7490}
Rim Inspection Guidelines {4202, 4209}
Rim Inspection Guidelines {4202, 4209}
Specifications
Rim Group <BR> 824C
824C TRACTOR, 825C & 826C COMPACTORS POWER TRAIN
Wheel Assembly <BR> 825C
824C TRACTOR, 825C & 826C COMPACTORS POWER TRAIN
Wheel Assembly <BR> 826C
824C TRACTOR, 825C & 826C COMPACTORS POWER TRAIN
Tool Operating Manual
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
Reuse And Salvage Guidelines
Thermal Spray Procedures for Wheel Bores on IT, Wheel Dozer, and Compactors {0679, 4201}
Thermal Spray Procedures for Wheel Bores on IT, Wheel Dozer, and Compactors {0679, 4201}
Thermal Spray Procedures for Wheel Dozer, Integrated Toolcarrier, and Wheel Tractor Scraper Hub {0679, 4051}
Thermal Spray Procedures for Wheel Dozer, Integrated Toolcarrier, and Wheel Tractor Scraper Hub {0679, 4051}
Disassembly and Assembly
Wheels (825C)
824C TRACTOR, 825C & 826C COMPACTORS POWER TRAIN
Front Tires And Rims (824C)
824C TRACTOR, 825C & 826C COMPACTORS POWER TRAIN
Rear Tires And Rims (824C)
824C TRACTOR, 825C & 826C COMPACTORS POWER TRAIN
Rear Axle Housing (825C, 826C)
824C TRACTOR, 825C & 826C COMPACTORS POWER TRAIN
Rear Axle Housing (824C)
824C TRACTOR, 825C & 826C COMPACTORS POWER TRAIN
Service Magazine
Salvage Procedures For Final Drive Planet Carrier {4093,4092,4050}
1984/01/16
Stronger Drivers Used With Demountable Rims{4202,4203}
1986/10/13
Improved Method Of Locking The Rim Drive On The Smaller Five-Piece Rims; Drive Pockets Serviced{4202,4203}
1989/10/02
Reuse And Salvage Guidelines
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Specifications
Oil Cooler (621B and 623B - Torque Converter Oil, 980C - Hydraulic Oil)
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Disassembly and Assembly
Transmission Oil Cooler
3406 VEHICULAR ENGINE FOR 824C TRACTOR, 825C & 826C COMPACTO
Service Magazine
New Bonnet Used On Transmission Oil Cooler; Bracket Holds Bonnet To Oil Pan{1375,1302}
1980/02/04
New Core Assembly Used In Transmission Oil Cooler Group{1375}
1981/12/07
New Core Assembly Used In Transmission Oil Cooler{1375}
1983/05/23
Field Repair Of Cooler Cores Made Of Aluminium{1063,1374,1375}
1977/09/05
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Reuse And Salvage Guidelines
Universal Joints and Drive Shafts {3108, 3251, 3253}
Universal Joints and Drive Shafts {3108, 3251, 3253}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Special Instruction
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Tool Operating Manual
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Reuse And Salvage Guidelines
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Planetary Final Drives for Wheel Loaders, Wheel Tractors, Compactors, Underground Articulated Trucks {4011, 4050, 4051}
Planetary Final Drives for Wheel Loaders, Wheel Tractors, Compactors, Underground Articulated Trucks {4011, 4050, 4051}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Repair of Web Cracks In Final Drive Planetary Carriers {4092}
Repair of Web Cracks In Final Drive Planetary Carriers {4092}
Thermal Spray Procedures for Wheel Dozer, Integrated Toolcarrier, and Wheel Tractor Scraper Hub {0679, 4051}
Thermal Spray Procedures for Wheel Dozer, Integrated Toolcarrier, and Wheel Tractor Scraper Hub {0679, 4051}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Disassembly and Assembly
Drive Axles (824C)
824C TRACTOR, 825C & 826C COMPACTORS POWER TRAIN
Drive Axles (825C, 826C)
824C TRACTOR, 825C & 826C COMPACTORS POWER TRAIN
Final Drive Carriers And Ring Gears (825C, 826C)
824C TRACTOR, 825C & 826C COMPACTORS POWER TRAIN
Final Drive Planet Carriers (824C)
824C TRACTOR, 825C & 826C COMPACTORS POWER TRAIN
Service Magazine
Change To Lubricant Recommendations For Differential And Final Drives{3258,4070}
1981/08/10
New Spacers Used On Planet Gear Shafts In Final Drives{4092,4091,4055}
1982/08/16
Changes Made To Keep Wheel Bearing Retainer Plate Tight{4051,4053,4055,4251}
1983/09/26
Salvage Procedures For Final Drive Planet Carrier {4093,4092,4050}
1984/01/16
New Axle Shaft Is Stronger, More Durable{3259}
1991/02/04
Product Information Guide, SEBF1015, "Improving Component Durability" , "Final Drives and Differentials" is now available {3258, 3282, 4050}
2008/12/29
Final Drive Duo-Cone Seal Assembly Information Update {7561}
2010/04/15

Truck sale:

Caterpillar 824C
 
Caterpillar 824C
- Wheel dozers
HOLT CAT
Caterpillar 824C, Wheel dozers, Construction
35,000 
Caterpillar 824C, Wheel dozers, Construction
- Wheel dozers
PETERSON TRACTOR CO
Caterpillar 824C, Wheel Loaders, Construction
12,501 
Caterpillar 824C, Wheel Loaders, Construction

MICHIGAN CAT
Caterpillar 824C, Construction
25,000 
Caterpillar 824C, Construction
- Dozers
WHAYNE SUPPLY COMPANY
Caterpillar 824C, Construction
 
Caterpillar 824C, Construction
- Wheel Loaders
GREGORY POOLE EQUIPMENT CO.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.