C15 Engine Emissions Retrofit Repower Tier III For 825C, 826C Compactor And 824C Wheel Tractor 85X00001-UP (MACHINE) SERVICE EQUIPMENT AND SUPPLIES Caterpillar SIS




WHEEL DOZER 824C WHEEL DOZER 85X
 C15 Engine Emissions Retrofit Repower Tier III For 825C, 826C Compactor And 824C Wheel Tractor 85X00001-UP (MACHINE) SEBP4812 824C 85X   (1978)

Parts group 824C:

  For full view, you need register
SERVICE EQUIPMENT AND SUPPLIES
CARTRIDGE KITS
CARTRIDGE GP-TURBOCHARGER
267-8584 CARTRIDGE GP-TURBOCHARGER
267-8584 CARTRIDGE GP-TURBOCHARGER
S/N TXG2726-UP; LHX15363-99999
PART OF 382-7898 TURBOCHARGER GP
CARTRIDGE GP-VANE PUMP
1U-2669 CARTRIDGE GP-VANE PUMP
1U-2669 CARTRIDGE GP-VANE PUMP
S/N 85X1-UP; 86X1-UP; 87X1-UP
144 L/MIN.(38 GPM)
PART OF 278-7054 PUMP GP-VANE
CARTRIDGE GP-VANE PUMP
3G-7662 CARTRIDGE GP-VANE PUMP
3G-7662 CARTRIDGE GP-VANE PUMP
S/N 85X1-UP; 86X1-UP; 87X1-UP
79 L/MIN (21 GPM)
PART OF 278-7054 PUMP GP-VANE
CHARTS & FILMS
PLATE & FILM GP
365-8230 PLATE & FILM GP
365-8230 PLATE & FILM GP
S/N TXG2726-UP
FILTERS
FILTER GP-ENGINE OIL
263-5373 FILTER GP-ENGINE OIL
263-5373 FILTER GP-ENGINE OIL
S/N TXG2726-UP; LHX15363-99999
AIR CLEANER GP
114-8147 AIR CLEANER GP
114-8147 AIR CLEANER GP
S/N 85X1-UP; 86X1-UP; 87X1-UP
PART OF 308-7178 CONVERSION GP-AIR INLET & EXH
AIR CLEANER GP
133-9448 AIR CLEANER GP
133-9448 AIR CLEANER GP
S/N 85X1-UP; 86X1-UP; 87X1-UP
PART OF 114-8147 AIR CLEANER GP, 455-1851 KIT-ENGINE CONVERSION
308-7178 CONVERSION GP-AIR INLET & EXH
308-7178 CONVERSION GP-AIR INLET & EXH -REPOWER
S/N 85X1-UP; 86X1-UP; 87X1-UP
PART OF 308-7173 CONVERSION AR-ENGINE
FILTER GP-PRIMARY FUEL
217-3660 FILTER GP-PRIMARY FUEL
217-3660 FILTER GP-PRIMARY FUEL
S/N TXG2726-UP; LHX15363-99999
FILTER GP-SECONDARY FUEL
227-5148 FILTER GP-SECONDARY FUEL
227-5148 FILTER GP-SECONDARY FUEL
S/N LHX15363-99999
FILTER GP-SECONDARY FUEL
355-0052 FILTER GP-SECONDARY FUEL
355-0052 FILTER GP-SECONDARY FUEL
S/N TXG2726-UP
FOR USE WITH @@@@@354-0043@@@@@
FILTER GP-WATER SEP & FUEL
174-9570 FILTER GP-WATER SEP & FUEL
174-9570 FILTER GP-WATER SEP & FUEL
S/N TXG2726-UP; LHX15363-99999
PART OF 190-8977 PUMP GP-FUEL PRM & WATER SEP
FILTER GP-OIL
249-2334 FILTER GP-OIL
249-2334 FILTER GP-OIL
S/N 85X1-UP; 86X1-UP; 87X1-UP
PART OF 308-7177 CONVERSION GP-HYDRAULIC SYSTEM, 455-1851 KIT-ENGINE CONVERSION
GASKET & SEAL KITS
8C-8711 KIT-ENGINE GASKET
8C-8711 KIT-ENGINE GASKET
S/N 85X1-UP; 87X1-UP
CENTRAL & LOWER STRUCTURE
FIELD INSTALLATION
6V-1567 KIT-TRANSMISSION GASKET
6V-1567 KIT-TRANSMISSION GASKET
S/N 85X1-UP; 86X1-UP; 87X1-UP
TRANSMISSION CASE & PARTS
FIELD INSTALLATION
6V-5404 KIT-TRANSMISSION GASKET
6V-5404 KIT-TRANSMISSION GASKET
S/N 85X1-UP; 86X1-UP; 87X1-UP
FIELD INSTALLATION
139-9170 KIT-GASKET
139-9170 KIT-GASKET
S/N 85X1-UP; 86X1-UP; 87X1-UP
FIELD REPLACEMENT FOR 114-4784 KIT-GASKET
FOR USE WITH REPLACEMENT OF PLANETARY GASKETS & SEALS
FIELD INSTALLATION
147-1898 KIT-GASKET
147-1898 KIT-GASKET
S/N 85X1-UP; 86X1-UP; 87X1-UP
CONTAINS GASKETS & SEALS USED IN TORQUE CONVERTER
FIELD INSTALLATION
147-1900 KIT-GASKET
147-1900 KIT-GASKET
S/N 85X588-UP; 86X442-UP; 87X190-UP
TORQUE CONVERTER
FOR USE WITH REPLACEMENT OF TORQUE CONVERTER GASKET & SEALS
FIELD INSTALLATION
KIT-GASKET
160-9874 KIT-GASKET
160-9874 KIT-GASKET -SINGLE CYLINDER LINER
S/N 85X1-UP; 86X1-UP; 87X1-UP
FOR USE WITH PQ0863
FIELD INSTALLATION
518-6292 KIT-GASKET
518-6292 KIT-GASKET
S/N 85X1-UP; 86X1-UP; 87X1-UP
CENTRAL AND LOWER STRUCTURE GASKET KIT
FIELD INSTALLATION
5P-8053 KIT-GASKET
5P-8053 KIT-GASKET
S/N 85X1-UP; 86X1-UP; 87X1-UP
SINGLE CYLINDER HEAD
FIELD INSTALLATION
5P-8059 KIT-GASKET
5P-8059 KIT-GASKET
S/N 85X1-UP; 86X1-UP; 87X1-UP
WATER LINES & OIL COOLER
FIELD INSTALLATION
5P-8372 KIT-GASKET
5P-8372 KIT-GASKET
S/N 85X1-UP; 86X1-UP; 87X1-UP
FUEL SYSTEM
FIELD INSTALLATION
6V-1140 KIT-GASKET
6V-1140 KIT-GASKET
S/N 85X1-UP; 86X1-UP; 87X1-UP
OUTPUT TRANSFER GEAR
FIELD INSTALLATION
6V-1571 KIT-GASKET
6V-1571 KIT-GASKET
S/N 85X1-UP; 86X1-UP; 87X1-UP
POWERTRAIN OIL LINES
FIELD INSTALLATION
6V-1669 KIT-GASKET
6V-1669 KIT-GASKET
S/N 85X1-UP; 86X1-UP; 87X1-UP
AIR COMPRESSOR
FIELD INSTALLATION
6V-4708 KIT-GASKET
6V-4708 KIT-GASKET
S/N 85X1-UP; 86X1-UP; 87X1-UP
TRANSMISSION OIL FILTER
FIELD INSTALLATION
8T-2497 KIT-GASKET
8T-2497 KIT-GASKET -AIR COMPRESSOR
S/N 85X1-UP; 86X1-UP; 87X1-UP
FIELD INSTALLATION
KIT-REBUILD
8C-8711 KIT-ENGINE GASKET
8C-8711 KIT-ENGINE GASKET
S/N 85X1-UP; 87X1-UP
CENTRAL & LOWER STRUCTURE
FIELD INSTALLATION
139-9170 KIT-GASKET
139-9170 KIT-GASKET
S/N 85X1-UP; 86X1-UP; 87X1-UP
FIELD REPLACEMENT FOR 114-4784 KIT-GASKET
FOR USE WITH REPLACEMENT OF PLANETARY GASKETS & SEALS
FIELD INSTALLATION
147-1898 KIT-GASKET
147-1898 KIT-GASKET
S/N 85X1-UP; 86X1-UP; 87X1-UP
CONTAINS GASKETS & SEALS USED IN TORQUE CONVERTER
FIELD INSTALLATION
147-1900 KIT-GASKET
147-1900 KIT-GASKET
S/N 85X588-UP; 86X442-UP; 87X190-UP
TORQUE CONVERTER
FOR USE WITH REPLACEMENT OF TORQUE CONVERTER GASKET & SEALS
FIELD INSTALLATION
KIT-GASKET
160-9874 KIT-GASKET
160-9874 KIT-GASKET -SINGLE CYLINDER LINER
S/N 85X1-UP; 86X1-UP; 87X1-UP
FOR USE WITH PQ0863
FIELD INSTALLATION
518-6292 KIT-GASKET
518-6292 KIT-GASKET
S/N 85X1-UP; 86X1-UP; 87X1-UP
CENTRAL AND LOWER STRUCTURE GASKET KIT
FIELD INSTALLATION
5P-8053 KIT-GASKET
5P-8053 KIT-GASKET
S/N 85X1-UP; 86X1-UP; 87X1-UP
SINGLE CYLINDER HEAD
FIELD INSTALLATION
5P-8059 KIT-GASKET
5P-8059 KIT-GASKET
S/N 85X1-UP; 86X1-UP; 87X1-UP
WATER LINES & OIL COOLER
FIELD INSTALLATION
5P-8372 KIT-GASKET
5P-8372 KIT-GASKET
S/N 85X1-UP; 86X1-UP; 87X1-UP
FUEL SYSTEM
FIELD INSTALLATION
6V-1140 KIT-GASKET
6V-1140 KIT-GASKET
S/N 85X1-UP; 86X1-UP; 87X1-UP
OUTPUT TRANSFER GEAR
FIELD INSTALLATION
6V-1571 KIT-GASKET
6V-1571 KIT-GASKET
S/N 85X1-UP; 86X1-UP; 87X1-UP
POWERTRAIN OIL LINES
FIELD INSTALLATION
6V-1669 KIT-GASKET
6V-1669 KIT-GASKET
S/N 85X1-UP; 86X1-UP; 87X1-UP
AIR COMPRESSOR
FIELD INSTALLATION
6V-4708 KIT-GASKET
6V-4708 KIT-GASKET
S/N 85X1-UP; 86X1-UP; 87X1-UP
TRANSMISSION OIL FILTER
FIELD INSTALLATION
8T-2497 KIT-GASKET
8T-2497 KIT-GASKET -AIR COMPRESSOR
S/N 85X1-UP; 86X1-UP; 87X1-UP
FIELD INSTALLATION

Information:

(For parts list, see above)

Special Instruction
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Technical Information Bulletin
Connecting Rod Bearings
Connecting Rod Bearings
Specifications
Bearings For Connecting Rods And Mains
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Disassembly and Assembly
Camshaft Bearings
3406C DIESEL ENGINES FOR CATERPILLAR BUILT MACHINES
Connecting Rod Bearings
3406C DIESEL ENGINES FOR CATERPILLAR BUILT MACHINES
Crankshaft Main Bearings
3406C DIESEL ENGINES FOR CATERPILLAR BUILT MACHINES
Connecting Rod Bearings
3406 VEHICULAR ENGINE FOR 824C TRACTOR, 825C & 826C COMPACTO
Crankshaft Main Bearings
3406 VEHICULAR ENGINE FOR 824C TRACTOR, 825C & 826C COMPACTO
Camshaft Bearings
3406 VEHICULAR ENGINE FOR 824C TRACTOR, 825C & 826C COMPACTO
Service Magazine
New Connecting Rod And Main Bearings Have A Thicker Coating (Layer) Of Lead-Tin Overlay{1230,1219,1203}
1981/01/19
6V3197 Spacer, 6V3041 Tool Group Available For Use During Removal and Installation Of Piston Pin Bearings{0622,1219,1218,1214}
1981/03/30
Use Correct Part Numbers For Main And Connecting Rod Bearings{1230,1203,1219}
1982/04/12
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
New Bearing Standard: Quantity Of One Part Number Now Has Both Halves Of The Bearing{7551}
1982/08/09
6V4869 Adapter And 6V6174 Plug Can Be Used To Install Camshaft Bearings{1211,0621}
1982/11/22
New Connecting Rod Bearings Used{1219,1230}
1983/04/04
Reuse Of Engine Bearings{1230}
1983/05/16
New Connecting Rod And Main Bearings Used{1203,1219,1226,1227,1230}
1983/10/10
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Bearing Repair Kit Available For Fan Belt Tightener{1358}
1983/12/12
Install Crankshaft Thrust Bearings Correctly To Avoid Damage{1202,1203}
1985/02/11
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Main And Connecting Rod Bearing Part Numbers {1203,1219,1230}
1987/01/26
Use Only Paint To Mark Connecting Rod Caps For Torque-Turn Method {1218,1219}
1987/06/01
Mid-Life Bearing Maintenance Recommendations {1203}
1987/09/14
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
New Design Thrust Plate Used In Crankshaft Group{1201,1202,1203}
1979/08/27
New Connecting Rod Bearing Used{0372,1203,1219}
1989/08/21
Remanufactured Camshafts And Cam Kits Available For Parts Service{1210,1211,1212}
1990/12/17
New Bronze Thrust Plate Used On Center Main Bearing Of Crankshaft Groups{1203}
1990/12/17
New 3406 (11N) Machine Engine Uses Different Components Than 3406 (70V) Machine Engine{1202,1218,1219}
1992/06/15
Special Instruction
2W719 Turbocharger Cartridge Repair Kit{1053}
2W719 Turbocharger Cartridge Repair Kit{1053}
2W715 Turbocharger Cartridge Repair Kit{1053}
2W715 Turbocharger Cartridge Repair Kit{1053}
7W4872 Turbocharger Cartridge Repair Kit{1053}
7W4872 Turbocharger Cartridge Repair Kit{1053}
Installation Instructions for the Refill Desiccant Kit{4285}
Installation Instructions for the Refill Desiccant Kit{4285}
Service Magazine
Stronger Turbine Wheel Used In Turbocharger Shaft And Wheel Assemblies{1053,1052}
1982/06/14
Rubber Plug Now Used In Drain Hole In Hydraulic Pumps With Double Seals{5055,5073}
1984/01/23
Use Care When Handling Turbocharger Compressor Wheels{1052,1077}
1985/12/16
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect{1053}
1986/02/03
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels{0374,1052}
1977/02/28
Oversize Bearings For Turbocharger Center Housings Available {1053,1052}
1987/03/30
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
Silicone Grease Now Used In Seal Ring Groove In Turbochargers{1052,1053,1077}
1978/05/15
Use Of 9S3265 Retaining Compound On Schwitzer Turbocharger Compressor Wheel Retainer Nuts{1052,1053}
1979/06/25
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning{1053}
1979/08/20
Only One Dowel Pin Is Now Used To Hold The Thrust Bearing In The Correct Position{1053,1052}
1979/09/03
6V2055 High Vacuum Grease Gives Better Oil Seal {1052,1053,1077,0682}
1979/09/10
Different Thrust Bearing And Thrust Rings Now Used In Turbochargers{1052,1053}
1979/10/22
Improved Analysis of Non-Warrantable Failures for Reman Vane Cartridges {5055}
2004/07/05
Operation and Maintenance Manual
Serial Number Plate (Flexxaire Fan)
Flexxaire Fan
Special Instruction
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Battery Ratings And Cross Reference Chart{1401}
Battery Ratings And Cross Reference Chart{1401}
Technical Information Bulletin
Updating the Certification Label for China{7557}
Updating the Certification Label for China{7557}
Roll Over Protective Structure and Falling Object Protective Structure Identification Film Retention{7000, 7405, 7557}
Roll Over Protective Structure and Falling Object Protective Structure Identification Film Retention{7000, 7405, 7557}
Specifications
Belt Tension Chart
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Belt Tension Chart
3406C ENGINE FOR CATERPILLAR BUILT MACHINES
Service Magazine
Lubricant Recommendations Changed For All Caterpillar Engines To Combat Effects Of Fuel Sulfur{1318,0375,0374,1280}
1982/05/03
Separate Valve Stem Gauges Available{0653,1000}
1982/06/07
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Reference Chart for Engine Improvements{0374,1000}
1982/10/25
Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01
Engine Information Plate Contains More Data; Use Of Performance Specifications{1250,7557}
1985/10/28
Polarity Connections And Use Of Service Meter Films When Service Meter Kits Are Installed{7480,7000}
1987/02/16
Use Only Paint To Mark Connecting Rod Caps For Torque-Turn Method {1218,1219}
1987/06/01
Current Chart For Dynamometer Adapters{0651,1000}
1979/01/22
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
New Engine Wall Charts Give Maintenance Management Recommendations{0374,0375,7500,7557,7580}
1989/03/06
Improved Seals Used; Seal Replacement In Folded Core Radiators{1353}
1990/06/04
Updated List Of Charts And Decals Available For Lubrication And Maintenance Intervals{0374,0375,7500,7557,7581}
1990/08/06
Identification Plate For Starting/Charging Diagnostic Connector {1450,7557,7569}
1994/02/28
Updated List Of Charts And Decals Available For Lubrication And Maintenance Intervals{0374,0375,7557}
1994/04/04
Lubricant Will Ease Installation Of Secondary Radial Seal Air Filter Element {1054}
1994/04/25
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Service Charts and Decals Available {0374, 0375, 7405, 7557}
2000/03/06
New Seventeen Character Product Identification Number (PIN) {7557}
2001/03/19
Ordering a Replacement Machine Identification Plate {7405, 7557}
2004/03/01
New ROPS Films, FOPS Films and TOPS Films Have Been Designed {7557}
2005/05/23
Ordering a Replacement Operator Protective Structure (OPS) Certification Film {7323, 7325, 7405, 7557}
2007/02/12
Improved Procedure for the Retention of the Identification Film for the Roll Over Protective Structure (ROPS) and Falling Object Protective Structure (FOPS) {7323, 7325, 7405, 7557}
2009/07/27
Special Instruction
Guidelines for the Use of Clean Out Filters for the Hydraulic Oil System and for the Power Train Oil System{3067, 5068}
Guidelines for the Use of Clean Out Filters for the Hydraulic Oil System and for the Power Train Oil System{3067, 5068}
Installation of Fuel/Water Separator{1260, 1263}
Installation of Fuel/Water Separator{1260, 1263}
Guidelines for the Use of High Efficiency Filters for the Hydraulic Oil System and for the Power Train Oil System {3000, 3004, 5050, 5068}
Guidelines for the Use of High Efficiency Filters for the Hydraulic Oil System and for the Power Train Oil System {3000, 3004, 5050, 5068}
Caterpillar Certified Procedure to Inspect and Clean Air Filters {1051, 1054}
Caterpillar Certified Procedure to Inspect and Clean Air Filters {1051, 1054}
Service Letter-NACD
The Air Cleaner Body Assembly Needs To Be Changed On Certain D7H And D8N Tractors; 14G Motor Graders; 824C, 825C, And 826C Compactors; And 936F, 950F, And 980F Loaders
The Air Cleaner Body Assembly Needs To Be Changed On Certain D7H And D8N Tractors; 14G Motor Graders; 824C, 825C, And 826C Compactors; And 936F, 950F, And 980F Loaders
The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory
The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory
Service Letter-Australia
The Air Cleaner Body Assembly Needs To Be Changed On Certain D7H And D8N Tractors; 14G Motor Graders; 824C, 825C, And 826C Compactors; And 936F, 950F, And 980F Loaders
The Air Cleaner Body Assembly Needs To Be Changed On Certain D7H And D8N Tractors; 14G Motor Graders; 824C, 825C, And 826C Compactors; And 936F, 950F, And 980F Loaders
The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory
The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory
Service Letter-CFEL
The Air Cleaner Body Assembly Needs To Be Changed On Certain D7H And D8N Tractors; 14G Motor Graders; 824C, 825C, And 826C Compactors; And 936F, 950F, And 980F Loaders
The Air Cleaner Body Assembly Needs To Be Changed On Certain D7H And D8N Tractors; 14G Motor Graders; 824C, 825C, And 826C Compactors; And 936F, 950F, And 980F Loaders
The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory
The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory
Service Letter-CSARL
The Air Cleaner Body Assembly Needs To Be Changed On Certain D7H And D8N Tractors; 14G Motor Graders; 824C, 825C, And 826C Compactors; And 936F, 950F, And 980F Loaders
The Air Cleaner Body Assembly Needs To Be Changed On Certain D7H And D8N Tractors; 14G Motor Graders; 824C, 825C, And 826C Compactors; And 936F, 950F, And 980F Loaders
The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory
The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory
Service Letter-Americas
The Air Cleaner Body Assembly Needs To Be Changed On Certain D7H And D8N Tractors; 14G Motor Graders; 824C, 825C, And 826C Compactors; And 936F, 950F, And 980F Loaders
The Air Cleaner Body Assembly Needs To Be Changed On Certain D7H And D8N Tractors; 14G Motor Graders; 824C, 825C, And 826C Compactors; And 936F, 950F, And 980F Loaders
The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory
The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory
Service Letter-Brazil
The Air Cleaner Body Assembly Needs To Be Changed On Certain D7H And D8N Tractors; 14G Motor Graders; 824C, 825C, And 826C Compactors; And 936F, 950F, And 980F Loaders
The Air Cleaner Body Assembly Needs To Be Changed On Certain D7H And D8N Tractors; 14G Motor Graders; 824C, 825C, And 826C Compactors; And 936F, 950F, And 980F Loaders
Specifications
Secondary Fuel Filter Base - 16G Motor Grader Only
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Primary Fuel Filter
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Fuel Filter Base
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Air Cleaner
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Oil Filter (245 Excavator, 621B and 623B Tractors)
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Oil Filter (16G Motor Grader, 824C Tractor, 825C & 826C Compactors, 980C Wheel Loader, 983B Track-Type Loader, 621E and 623E Tractors)
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Oil Cooler Bypass Valve
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Primary Fuel Filter
3406C ENGINE FOR CATERPILLAR BUILT MACHINES
Fuel Filter Base
3406C ENGINE FOR CATERPILLAR BUILT MACHINES
Air Cleaner
3406C ENGINE FOR CATERPILLAR BUILT MACHINES
Oil Filter
3406C ENGINE FOR CATERPILLAR BUILT MACHINES
Transmission Oil Filter
824C TRACTOR, 825C & 826C COMPACTORS POWER TRAIN
Tool Operating Manual
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Service Letter-China
The Air Cleaner Body Assembly Needs To Be Changed On Certain D7H And D8N Tractors; 14G Motor Graders; 824C, 825C, And 826C Compactors; And 936F, 950F, And 980F Loaders
The Air Cleaner Body Assembly Needs To Be Changed On Certain D7H And D8N Tractors; 14G Motor Graders; 824C, 825C, And 826C Compactors; And 936F, 950F, And 980F Loaders
The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory
The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory
Service Letter-Asia
The Air Cleaner Body Assembly Needs To Be Changed On Certain D7H And D8N Tractors; 14G Motor Graders; 824C, 825C, And 826C Compactors; And 936F, 950F, And 980F Loaders
The Air Cleaner Body Assembly Needs To Be Changed On Certain D7H And D8N Tractors; 14G Motor Graders; 824C, 825C, And 826C Compactors; And 936F, 950F, And 980F Loaders
The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory
The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory
Systems Operation
Cab Air Filters
Air Conditioning and Heating R-12 All Caterpillar Machines
Reuse And Salvage Guidelines
Caterpillar Certified Procedure to Inspect and Clean Air Filters {1051, 1054}
Caterpillar Certified Procedure to Inspect and Clean Air Filters {1051, 1054}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Service Letter-APD
The Air Cleaner Body Assembly Needs To Be Changed On Certain D7H And D8N Tractors; 14G Motor Graders; 824C, 825C, And 826C Compactors; And 936F, 950F, And 980F Loaders
The Air Cleaner Body Assembly Needs To Be Changed On Certain D7H And D8N Tractors; 14G Motor Graders; 824C, 825C, And 826C Compactors; And 936F, 950F, And 980F Loaders
The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory
The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory
Disassembly and Assembly
Fuel Filter & Base
3406C DIESEL ENGINES FOR CATERPILLAR BUILT MACHINES
Oil Filter & Base Assembly
3406C DIESEL ENGINES FOR CATERPILLAR BUILT MACHINES
Fuel Filter
3406 VEHICULAR ENGINE FOR 824C TRACTOR, 825C & 826C COMPACTO
Primary Fuel Filter And Base
3406 VEHICULAR ENGINE FOR 824C TRACTOR, 825C & 826C COMPACTO
Oil Filter Base
3406 VEHICULAR ENGINE FOR 824C TRACTOR, 825C & 826C COMPACTO
Air Cleaner Group
3406 VEHICULAR ENGINE FOR 824C TRACTOR, 825C & 826C COMPACTO
Transmission Oil Filter
824C TRACTOR, 825C & 826C COMPACTORS POWER TRAIN
Hydraulic Tank Oil Filter
824C TRACTOR, 825C & 826C COMPACTOR VEHICLE SYSTEMS
Service Magazine
New Sealing Washer Used Under Retainer Nut On Primary Fuel Filter{1260}
1980/07/14
Change To Lubricant Recommendations For Differential And Final Drives{3258,4070}
1981/08/10
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Lubricant Recommendations Changed For All Caterpillar Engines To Combat Effects Of Fuel Sulfur{1318,0375,0374,1280}
1982/05/03
Added Methods To Decrease The Effects Of High Sulfur Fuels{1355,1280,1318,1000}
1982/08/30
New Oil Additives Can Cause High Copper (Cu) Indications During S.O.S. Tests{0372,1318}
1982/09/27
Oil Filter Inspection Can Save Additional Internal Engine Damage{1318}
1985/06/17
Canister Size Of Coolant Conditioner Element Has Changed{1350}
1985/11/25
Gasket Leakage On Aftermarket Fuel Filters{1261}
1985/12/16
Fuel Sulfur Analyzer Available{0651,1280,1318}
1986/01/13
Engine Oil Filter Element Has Metal Wrapper Instead Of Paper Wrapper{1318}
1986/03/10
Field Repair Of Cooler Cores Made Of Aluminium{1063,1374,1375}
1977/09/05
Some 2P4005 Oil Filter Assemblies May Be Difficult To Install{1318}
1987/02/16
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
New Engine Oil Coolers Have Rubber End Sheets {1378}
1988/01/25
Stronger Suction Bell Assembly Now Used In Engine Oil Lines Group{1318,1307}
1979/02/05
Use Correct Procedure To Clean The Engine Lubrication System If Permanent Type Antifreeze (Ethylene Glycol) Is In The Engine{1318,1350}
1979/02/19
New Larger Capacity Water Separator Is Available{1250}
1979/03/12
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fast Fuel Delivery Couplings And Fast Oil Change Couplings Are Available For All Caterpillar Equipment{0671,1273,1279,1325}
1979/10/08
Engine Oil Viscosity Changed To SAE 10W/30 For Shipment From All U.S. Factories{1318}
1979/10/15
Air Filter Maintenance{1051,1054}
1991/09/30
Light Green Gasket Material On Secondary Air Filter Elements May Stick To Filter Housing{1054,1051}
1992/02/10
Improved 1R-0712 Fuel Filter Provides Improved Sealing{1261}
1994/03/28
Lubricant Will Ease Installation Of Secondary Radial Seal Air Filter Element {1054}
1994/04/25
Installation Procedure For 1R-0716 Engine Oil Filter{1318}
1994/06/20
Different Fuel Filter Available To Prevent Premature Wear On Fuel Injection Pump Plungers And Barrels{1261,1251}
1994/07/11
Exhaust Dust Ejector Operation{1055,1068}
1994/09/26
Filter Retainer Pilot Diameter Changed To Better Fit End Caps Of Hydraulic Filters {5068}
1996/10/14
Be Sure To Correctly Tighten 1R-0712, 1R-0740, 1R-0749, 1R-0750, 1R-0751, 1R-0753, And 1R-0759 Fuel Filter Assemblies {1261}
1998/01/26
New Caterpillar High Efficiency Fuel Filters With STAY CLEAN VALVES® Replace All Standard Fuel Filters In February Of 1999 {1261}
1999/04/12
New Cab Air Filters Provide Improved Efficiency and Odor Reduction {7309, 7320, 7342}
2004/08/02
A Replacement Filter Is Incorrectly Identified {5050, 5068}
2002/12/23
New High Efficiency Oil Filters are Now Available {1308}
2004/03/22
New High Efficiency Oil Filters are Now Available {1308}
2006/08/21
Information that Improves the Service Life of the Remanufactured Air Conditioning Compressor {1357, 1358, 1397, 1802, 1805, 1809, 7320, 7342, 7343}
2008/03/10
New Oil Filters for all Cat Machines are Available {3004, 3067, 4295, 431F, 5068}
New Oil Filters for all Cat Machines are Available {3004, 3067, 4295, 431F, 5068}
Truck Engine News
The Color of Certain O-Ring Seals Is Changing {7555}
2002/12/01
The 1U-8846 Gasket Sealant Is Cancelled {7555}
2010/03/31
Engine News
The Color of Certain O-Ring Seals Is Changing {7555}
2003/01/01
The 1U-8846 Gasket Sealant Is Cancelled {7555}
2010/03/22
A Modified Procedure Is Now Used to Seal the Mating Surfaces of the Cylinder Block and the Gasket on C15 And C18 Engines {1100, 1124, 1201}
A Modified Procedure Is Now Used to Seal the Mating Surfaces of the Cylinder Block and the Gasket on C15 And C18 Engines {1100, 1124, 1201}
Special Instruction
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Special Handling Information For Installation Of 2W1733 Or 2W1734 Crankshaft Seal Group{1160, 1161, 1202}
Special Handling Information For Installation Of 2W1733 Or 2W1734 Crankshaft Seal Group{1160, 1161, 1202}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Instructions For The 160-9874 Gasket Kit {1213, 7555}
Installation Instructions For The 160-9874 Gasket Kit {1213, 7555}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
Lip Type Seals {0599, 0733, 5050, 7555}
Lip Type Seals {0599, 0733, 5050, 7555}
Service Letter-NACD
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Tool Operating Manual
Caterpillar O-rings: Measuring Tool, Material Application, and Dash Size Cross Reference{0374, 0599, 0759, 0767, 7555}
Caterpillar O-rings: Measuring Tool, Material Application, and Dash Size Cross Reference{0374, 0599, 0759, 0767, 7555}
Service Letter-China
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-Asia
Reuse And Salvage Guidelines
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Service Letter-APD
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Magazine
6V2086 And 6V2087 Seal And Wear Sleeve Installers Available{0622,1160,1161}
1980/09/01
New Sealant Used In Place Of Gasket For Hydraulic Tank Flange{5056,7555}
1981/02/23
6V6142 And 6V6143 Installers Can Be Used To Install Crankshaft Seals And Wear Sleeves{0622,0626,1160,1161}
1982/11/01
New Crankshaft Seal Groups Used On More 3400 Series Engines{1160,1161}
1985/03/11
Crankshaft Seal Usage On 3400 Series Engines{1160,1161}
1985/12/16
Tools To Remove Wear Sleeves From Crankshafts{0621,7558}
1977/04/18
Tools To Install Crankshaft Seal And Wear Sleeve{1160,1161,0622}
1977/07/11
Silicone Rubber Water Seals Available{1100}
1987/07/06
New Crankshaft Seal Groups Provide Increased Protection From Dirt And Dust{1160,1161}
1991/07/08
New Water Seals Used In Cylinder Head Assemblies{1124}
1994/09/05
Wear Sleeve Removal Tooling May "Mark" The Crankshaft{1202,1161}
1995/08/14
Recommendations For Inspection And Replacement Of Rubber and Viscous Crankshaft Dampers{1205}
1995/08/21
3406C Pump And Governor Changes Provide Improved Oil And Fuel Leak Resistence{7555}
1997/09/08
Improved Caterpillar O-ring Face Seals are Now Available {7555}
2000/05/08
The Color of Certain O-Ring Seals Will Change {7555}
2002/12/09
Repair Guidelines for Air Compressors {1803}
2003/08/25
Improvement to the Seal Reduces Leaks in the Transfer Case {3159}
2004/01/26
An Improved Three-Piece Oil Pan Gasket is Now Used {1302, 7555}
2008/09/29
Final Drive Duo-Cone Seal Assembly Information Update {7561}
2010/04/15
The 1U-8846 Gasket Sealant Is Canceled {7555}
2011/02/02
An Improved Valve Cover Seal Is Used on Certain Machine Engines {1107, 7553, 7555}
2014/07/31
Truck Engine News
The 1U-8846 Gasket Sealant Is Cancelled {7555}
2010/03/31
Engine News
The 1U-8846 Gasket Sealant Is Cancelled {7555}
2010/03/22
Special Instruction
Installation Of 6V124 Drive Coupling Modification Kit{0650, 0706, 1250}
Installation Of 6V124 Drive Coupling Modification Kit{0650, 0706, 1250}
Chart for Heli-Coil Repair {0676}
Chart for Heli-Coil Repair {0676}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
Service Magazine
New Sealant Used In Place Of Gasket For Hydraulic Tank Flange{5056,7555}
1981/02/23
The 1U-8846 Gasket Sealant Is Canceled {7555}
2011/02/02
An Improved Valve Cover Seal Is Used on Certain Machine Engines {1107, 7553, 7555}
2014/07/31
Truck Engine News
Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}
Engine News
Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}
Special Instruction
Index of Repair Process Engineering Publications {0374, 1000, 7000}
Index of Repair Process Engineering Publications {0374, 1000, 7000}
Procedure for Ordering Vintage Parts {0374, 1000, 7000}
Procedure for Ordering Vintage Parts {0374, 1000, 7000}
Caterpillar Service Welding Guide {0374, 0599, 0677, 0678, 0679}
Caterpillar Service Welding Guide {0374, 0599, 0677, 0678, 0679}
Caterpillar Communication Regarding REACH Article 33{0374, 7000}
Caterpillar Communication Regarding REACH Article 33{0374, 7000}
Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}
Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}
Visual Service Procedures - Colors and Symbols {0374, 7000, 7006, 7960}
Visual Service Procedures - Colors and Symbols {0374, 7000, 7006, 7960}
Hose Inspection Form {0374, 0599, 5057, 5057}
Hose Inspection Form {0374, 0599, 5057, 5057}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN WHEEL DOZERS AND WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN WHEEL DOZERS AND WHEEL LOADERS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Tool Operating Manual
9U-7840 Fuel Injection Equipment Calibration Fluid Test Kit{0374, 0599, 0706}
9U-7840 Fuel Injection Equipment Calibration Fluid Test Kit{0374, 0599, 0706}
146-4080 Digital Multimeter Specification, Testing, and Maintenance Manual{0374, 0599, 0709}
146-4080 Digital Multimeter Specification, Testing, and Maintenance Manual{0374, 0599, 0709}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Using the Cat 179-0710 Burn Rate Fuel Flow Measurement System {0374, 0599, 0706, 1250, 1280}
Using the Cat 179-0710 Burn Rate Fuel Flow Measurement System {0374, 0599, 0706, 1250, 1280}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Base-Mounted Recirculating Parts Washers{0374, 0599, 0680, 0699, 0700}
Base-Mounted Recirculating Parts Washers{0374, 0599, 0680, 0699, 0700}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
319-2187 Diesel Particulate Filter (DPF) Cleaner {0374, 0599, 0680, 0701, 0702, 108D}
319-2187 Diesel Particulate Filter (DPF) Cleaner {0374, 0599, 0680, 0701, 0702, 108D}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
<NOBR>439-3938</NOBR>, <NOBR>439-3939</NOBR>, <NOBR>439-3940</NOBR>, <NOBR>439-3941</NOBR>, <NOBR>439-3942</NOBR>, <NOBR>439-3943</NOBR> Link Bracket Assemblies {0374, 0599, 0632, 0700, 7000}
439-3938, 439-3939, 439-3940, 439-3941, 439-3942, 439-3943 Link Bracket Assemblies {0374, 0599, 0632, 0700, 7000}
Caterpillar O-rings: Measuring Tool, Material Application, and Dash Size Cross Reference{0374, 0599, 0759, 0767, 7555}
Caterpillar O-rings: Measuring Tool, Material Application, and Dash Size Cross Reference{0374, 0599, 0759, 0767, 7555}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures For Using: 127-8781 Transfer Filter Cart , old 9U-7361 (110V, 60 hz), 169-7159 Transfer Filter Cart , old 127-8782 (220V, 50 hz) CE, 174-9158 Transfer Filter Cart , old 129-0849 (Air Motor Driven){0374, 0599, 0680, 0738}
Procedures For Using: 127-8781 Transfer Filter Cart , old 9U-7361 (110V, 60 hz), 169-7159 Transfer Filter Cart , old 127-8782 (220V, 50 hz) CE, 174-9158 Transfer Filter Cart , old 129-0849 (Air Motor Driven){0374, 0599, 0680, 0738}
Procedure for Using 173-8839 Fluid Storage Filter Cart {0113, 0374, 0599, 0680, 0738, 7579}
Procedure for Using 173-8839 Fluid Storage Filter Cart {0113, 0374, 0599, 0680, 0738, 7579}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Using the 164-2691 Printer Group {0374, 0599, 0684, 5057}
Using the 164-2691 Printer Group {0374, 0599, 0684, 5057}
168-7720 Ultrasonic Wear Indicator III Group{0374, 0599, 0729, 0787}
168-7720 Ultrasonic Wear Indicator III Group{0374, 0599, 0729, 0787}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
4-Inch Radial Hose Machine{0374, 0599, 0684, 0738, 5057}
4-Inch Radial Hose Machine{0374, 0599, 0684, 0738, 5057}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
131-5051 Dataview Group and Dataview Portable Tech Station Group{0374, 0599, 0701, 0709}
131-5051 Dataview Group and Dataview Portable Tech Station Group{0374, 0599, 0701, 0709}
Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}
Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
Procedures for Using the 212-1503 Portable Parts Washer{0374, 0599, 0680, 0699, 0700}
Procedures for Using the 212-1503 Portable Parts Washer{0374, 0599, 0680, 0699, 0700}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
Using the 223-2105 Hose Cutting Machine{0374, 0599, 0678, 0684, 0708, 0738, 5057, 6060}
Using the 223-2105 Hose Cutting Machine{0374, 0599, 0678, 0684, 0708, 0738, 5057, 6060}
Crimping XT-3 ES and XT-5 S4G, MCSH, and MCSX Couplings Using 4C-3660, 4C-5052, 4C-5053, 9U-5792, or 9U-7261 Hose Machines{0374, 0599, 0684, 0738, 5057}
Crimping XT-3 ES and XT-5 S4G, MCSH, and MCSX Couplings Using 4C-3660, 4C-5052, 4C-5053, 9U-5792, or 9U-7261 Hose Machines{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}
Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}
Crimping 1028 Thermoplastic Hose, 2760 Reduced Diameter Thermoplastic Hose, and 1543 Air Conditioning Hose{0374, 0599, 0684, 1808, 1812, 7554}
Crimping 1028 Thermoplastic Hose, 2760 Reduced Diameter Thermoplastic Hose, and 1543 Air Conditioning Hose{0374, 0599, 0684, 1808, 1812, 7554}
456-4449 Support Device{0374, 0599, 0629, 0632, 0700}
456-4449 Support Device{0374, 0599, 0629, 0632, 0700}
Installing 457-6030 (C3-290 Controller) on Hose Crimping Machines 233-8048, 286-4354, 286-4355, 275-6199, 286-4353, and 233-8038{0374, 0599, 0684, 0700, 0738, 5057}
Installing 457-6030 (C3-290 Controller) on Hose Crimping Machines 233-8048, 286-4354, 286-4355, 275-6199, 286-4353, and 233-8038{0374, 0599, 0684, 0700, 0738, 5057}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
NEHS1214: 455-0126 Nitrogen Booster Pump Group {0374, 0599, 0647, 0756, 4263, 4331, 5077, 7200}
NEHS1214: 455-0126 Nitrogen Booster Pump Group {0374, 0599, 0647, 0756, 4263, 4331, 5077, 7200}
464-0265 Lifting Bracket Assembly{0374, 0599, 0629, 0632, 0700, 0708, 1353}
464-0265 Lifting Bracket Assembly{0374, 0599, 0629, 0632, 0700, 0708, 1353}
General Usage for all Shackle Types{0374, 0599, 0629, 0632, 1122, 6459, 7000}
General Usage for all Shackle Types{0374, 0599, 0629, 0632, 1122, 6459, 7000}
442-1750 Lifting Plate{0374, 0599, 0629, 0632, 0700, 1122}
442-1750 Lifting Plate{0374, 0599, 0629, 0632, 0700, 1122}
Zip-Tie Installation Guide{0374, 0599, 7000}
Zip-Tie Installation Guide{0374, 0599, 7000}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
NEHS1270 TesLite and LoadProCables {0374, 0599, 0709, 0734}
NEHS1270 TesLite and LoadProCables {0374, 0599, 0709, 0734}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}
Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
M0090131 Battery Analyzer 480-4181 (484-4859 Group) {0374, 0599, 0709, 1401, 7468}
M0090131 Battery Analyzer 480-4181 (484-4859 Group) {0374, 0599, 0709, 1401, 7468}
Portable Aqueous Based Parts Cleaners, Models 482-9830, 482-9831, and 482-9832 {0374, 0599, 0680, 0699}
Portable Aqueous Based Parts Cleaners, Models 482-9830, 482-9831, and 482-9832 {0374, 0599, 0680, 0699}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN WHEEL DOZERS AND WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN WHEEL DOZERS AND WHEEL LOADERS
Service Letter-Asia
Reuse And Salvage Guidelines
Index of Repair Process Engineering Publications {0374, 1000, 7000}
Index of Repair Process Engineering Publications {0374, 1000, 7000}
Reuse and Salvage for Mechanical Governor Groups in 3114, 3116, and 3126 Engines Equipped with Mechanical Unit Injectors (MUI) {0374, 1000, 1050, 1250, 1300}
Reuse and Salvage for Mechanical Governor Groups in 3114, 3116, and 3126 Engines Equipped with Mechanical Unit Injectors (MUI) {0374, 1000, 1050, 1250, 1300}
Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}
Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}
General Salvage and Reconditioning Techniques {0374, 1000}
General Salvage and Reconditioning Techniques {0374, 1000}
Transmission Reuse and Salvage Manual Contents {0374, 3030}
Transmission Reuse and Salvage Manual Contents {0374, 3030}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Caterpillar Service Welding Guide {0374, 0599, 0677, 0678, 0679}
Caterpillar Service Welding Guide {0374, 0599, 0677, 0678, 0679}
Thermal Spray Procedures for Torque Converter Carrier - Seal Ring Bore {0374, 0599, 0679, 3101, 3135}
Thermal Spray Procedures for Torque Converter Carrier - Seal Ring Bore {0374, 0599, 0679, 3101, 3135}
Application of Abrasion Resistant Material{0374, 0679, 0751, 0759, 6800}
Application of Abrasion Resistant Material{0374, 0679, 0751, 0759, 6800}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
Contamination Control Guidelines
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Applied Failure Analysis
Failure Analysis Report - AFA Good Report {0374, 1000}
Failure Analysis Report - AFA Good Report {0374, 1000}
Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}
Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}
Product Evaluation Report - AFA Bad Report {0374, 1000}
Product Evaluation Report - AFA Bad Report {0374, 1000}
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN WHEEL DOZERS AND WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN WHEEL DOZERS AND WHEEL LOADERS
Technical Analysis
Technical Analysis 1 (TA1) Visual Inspection for Large Wheel Dozers {0372, 0374, 1000, 7000, 753S, 7565}
Technical Analysis 1 (TA1) Visual Inspection for Large Wheel Dozers {0372, 0374, 1000, 7000, 753S, 7565}
Service Magazine
The Current Special Publication, PECP9067, "One Safe Source" Is Now Available Through The Internet {0374}
2002/05/13
Announcing the Combination of Groups Within the Paper Copies of the Caterpillar Parts Manuals {0374}
2002/06/03
The Contents Of The Service Manuals For All Caterpillar Machines Is Available On The Caterpillar Intranet {1000}
2002/12/02
"Tool and Shop Products Guide" by the Cat Service Technology Group (CSTG) Has Been Replaced by Two New Catalogs {0374}
2006/04/17
TA2 (Technical Analysis) Inspections are Now Available on SIS {0372, 1000, 7000, 753T, 7565}
2013/01/10
Recent Changes to the R134a Refrigerant Air Conditioning Manuals Are Now Available for All Caterpillar Products {0374, 1802, 1805, 1807, 1808, 1809, 7309, 7320, 7322, 7343}
2014/07/17
A New Tool Operating Manual for Proper Zip-Tie Installation Is Now Available for All Caterpillar Products {0374, 0599, 7000}
2015/08/10
Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/24
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Process to Print Collage Schematics {0374, 1000, 7000}
Process to Print Collage Schematics {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}
New Service Information Content Is Now Available in Channel 1 {0374, 7000}
New Service Information Content Is Now Available in Channel 1 {0374, 7000}
Engine News
A New Coolant Conditioner Is Now Available {1350, 1352, 1395}
2012/03/28
Operation and Maintenance Manual
Refill Capacities (Flexxaire Fan)
Flexxaire Fan
Lubricant Viscosities (Flexxaire Fan)
Flexxaire Fan
Special Instruction
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Managing Engine Oil Service Intervals for Equipment Operating at High Altitudes{1261, 1308, 1348}
Managing Engine Oil Service Intervals for Equipment Operating at High Altitudes{1261, 1308, 1348}
Instructions for Use of Cat Coolant Conditioner for Aluminum Components {1350, 1352, 1395}
Instructions for Use of Cat Coolant Conditioner for Aluminum Components {1350, 1352, 1395}
Instructions for Use of Cat<SUP>&reg;</SUP> Coolant Conditioner for Modular Core Aluminum Radiators {1350, 1350, 1352, 1353, 1395}
Instructions for Use of Cat® Coolant Conditioner for Modular Core Aluminum Radiators {1350, 1350, 1352, 1353, 1395}
Technical Information Bulletin
Automatic Transmission Fluid (ATF) Is Not An Acceptable Lubricant For Flexxaire Fans
Automatic Transmission Fluid (ATF) Is Not An Acceptable Lubricant For Flexxaire Fans
Specifications
Coolant Conditioner Base
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Coolant Conditioner Base
3406C ENGINE FOR CATERPILLAR BUILT MACHINES
Tool Operating Manual
NEHS1126: <NOBR>370-8570</NOBR> Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
Using the Cat 179-0710 Burn Rate Fuel Flow Measurement System {0374, 0599, 0706, 1250, 1280}
Using the Cat 179-0710 Burn Rate Fuel Flow Measurement System {0374, 0599, 0706, 1250, 1280}
370-8568 Bulk Fuel Filtration Group 50 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8568 Bulk Fuel Filtration Group 50 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}
204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}
284-0413 Bulk Fuel Filtration Group 50 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0413 Bulk Fuel Filtration Group 50 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
Procedures For Using: 127-8781 Transfer Filter Cart , old 9U-7361 (110V, 60 hz), 169-7159 Transfer Filter Cart , old 127-8782 (220V, 50 hz) CE, 174-9158 Transfer Filter Cart , old 129-0849 (Air Motor Driven){0374, 0599, 0680, 0738}
Procedures For Using: 127-8781 Transfer Filter Cart , old 9U-7361 (110V, 60 hz), 169-7159 Transfer Filter Cart , old 127-8782 (220V, 50 hz) CE, 174-9158 Transfer Filter Cart , old 129-0849 (Air Motor Driven){0374, 0599, 0680, 0738}
Procedure for Using 173-8839 Fluid Storage Filter Cart {0113, 0374, 0599, 0680, 0738, 7579}
Procedure for Using 173-8839 Fluid Storage Filter Cart {0113, 0374, 0599, 0680, 0738, 7579}
Reuse And Salvage Guidelines
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Contamination Control Guidelines
Solvent Pretreatment Method for Determining Additive Interference in New Bulk Oils {1348, 3080, 4070, 429F, 5095, 7542}
Solvent Pretreatment Method for Determining Additive Interference in New Bulk Oils {1348, 3080, 4070, 429F, 5095, 7542}
Caterpillar Bulk Oil Filtration Procedure {1348, 3080, 4070, 429F, 5095, 7542}
Caterpillar Bulk Oil Filtration Procedure {1348, 3080, 4070, 429F, 5095, 7542}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Disassembly and Assembly
Transmission Oil Filter
824C TRACTOR, 825C & 826C COMPACTORS POWER TRAIN
Hydraulic Tank Oil Filter
824C TRACTOR, 825C & 826C COMPACTOR VEHICLE SYSTEMS
Service Magazine
Change To Lubricant Recommendations For Differential And Final Drives{3258,4070}
1981/08/10
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Lubricant Recommendations Changed For All Caterpillar Engines To Combat Effects Of Fuel Sulfur{1318,0375,0374,1280}
1982/05/03
Caterpillar Recommends Against The Use Of Alcohol Mist Injection Systems{1050,1250}
1982/06/28
Added Methods To Decrease The Effects Of High Sulfur Fuels{1355,1280,1318,1000}
1982/08/30
New Oil Additives Can Cause High Copper (Cu) Indications During S.O.S. Tests{0372,1318}
1982/09/27
Canister Size Of Coolant Conditioner Element Has Changed{1350}
1985/11/25
Fuel Sulfur Analyzer Available{0651,1280,1318}
1986/01/13
Oil Total Base Number (TBN) Test Kit Available{1300}
1986/01/20
High Silicates In Antifreeze{1350}
1986/02/03
New 8T2998 Lubricant Available{0645,1210}
1986/02/17
Engine Oil Filter Element Has Metal Wrapper Instead Of Paper Wrapper{1318}
1986/03/10
Caterpillar Antifreeze Now Used And Available From Parts Departments{1350,1395}
1986/11/10
Some 2P4005 Oil Filter Assemblies May Be Difficult To Install{1318}
1987/02/16
Easy Five-Minute Coolant Conditioner Test With 8T5296 Coolant Conditioner Test Kit{1395,0786}
1987/03/23
Cooling System Conditioner{1395,1350}
1987/03/23
5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
Analyzing Caterpillar And Competitive Antifreezes For Amount Of Silicates{1350,1395}
1988/02/22
New Publication Available-&quot;Diesel Fuels And Your Engine&quot;{0374,0375,0645}
1988/03/21
Extraction Tools For &quot;Live Oil Sampling&quot;{7770,0770,0781,0783,0784}
1988/04/18
Installation Of Valves For Live Oil Sampling{7770,0770,0781,0783,0784}
1988/06/06
Stronger Suction Bell Assembly Now Used In Engine Oil Lines Group{1318,1307}
1979/02/05
Use Correct Procedure To Clean The Engine Lubrication System If Permanent Type Antifreeze (Ethylene Glycol) Is In The Engine{1318,1350}
1979/02/19
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Engine Oil Viscosity Changed To SAE 10W/30 For Shipment From All U.S. Factories{1318}
1979/10/15
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Lubrication Hole Removed From Differential Pinion Shaft{3254,3280}
1989/01/09
New Engine Wall Charts Give Maintenance Management Recommendations{0374,0375,7500,7557,7580}
1989/03/06
Engine Coolant Can Be Recycled{1395}
1989/11/13
New Cooling System Cleaner Now Available For All Engines{1350,0680,1352,1353}
1989/12/25
Updated List Of Charts And Decals Available For Lubrication And Maintenance Intervals{0374,0375,7500,7557,7581}
1990/08/06
Polyurethane Painting Process Used; Touch-up Paint And Paint Solvent Available For Parts Service{0652,7559,7581}
1994/04/18
Caterpillar Introduces New Long Life Heavy Duty Engine Coolant{1395}
1994/09/19
Filter Retainer Pilot Diameter Changed To Better Fit End Caps Of Hydraulic Filters {5068}
1996/10/14
New Recommendations for Selecting the Oil Viscosity for the Differentials and Final Drives {3258, 4011, 4051, 7581}
2001/04/02
A New Quick Coupler is Required to Extend the Service Life of Dual Purpose Valves {6129, 7542}
2002/01/21
A New Edition of the Special Publication, SEBD0640, "Oil and Your Engine" is Available {1348}
2001/11/19
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2003/12/01
Operation and Maintenance Manual, SEBU6250, "Caterpillar Machine Fluid Recommendations" has been Revised {1000, 1250, 1300, 1350, 7000, 7581}
2002/09/16
Understanding Elevated Copper Levels in Used Oil Samples {1348, 7542}
2003/02/17
Use <NOBR> 1U-9891</NOBR> Hydraulic Oil Additive to Eliminate Brake Chatter and Reduce Noise in the Limited Slip Differential {3263, 5095}
2008/10/27
Instructions for Filling the Oil of Nexus and Classic Carrier Roller and Idler {4154, 4159}
2004/08/16
Shop Chemicals are now Listed in Cat Shop Supplies and Hand Tools {0599, 0644, 0645}
2005/12/12
Managing Engine Oil Service Levels {1348}
2007/06/18
Changes to the Usage and Cleaning of the Contamination Monitor Group {0645, 0680, 1280, 1348, 3080, 429F, 5095}
2010/09/01
Redesigned Fluid Sampling Valves Are Now Available for All Cat Products {7542}
2011/02/11
A New Coolant Conditioner Is Now Available {1350, 1352, 1395}
2012/03/28
Recent Changes to the R134a Refrigerant Air Conditioning Manuals Are Now Available for All Caterpillar Products {0374, 1802, 1805, 1807, 1808, 1809, 7309, 7320, 7322, 7343}
2014/07/17
Truck Engine News
The Product Structure Link In The Service Information System (SIS) Has Been Changed For Service Letters That Address Parts Stock Distribution {1000, 7750}
2001/08/01
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
Engine News
The Product Structure Link In The Service Information System (SIS) Has Been Changed For Service Letters That Address Parts Stock Distribution {1000, 7750}
2001/09/01
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
Special Instruction
Use Of 6V3025 Battery Cable Repair Kit{0613, 1400}
Use Of 6V3025 Battery Cable Repair Kit{0613, 1400}
Chart for Heli-Coil Repair {0676}
Chart for Heli-Coil Repair {0676}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
Caterpillar Communication Regarding REACH Article 33{0374, 7000}
Caterpillar Communication Regarding REACH Article 33{0374, 7000}
Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}
Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}
Visual Service Procedures - Colors and Symbols {0374, 7000, 7006, 7960}
Visual Service Procedures - Colors and Symbols {0374, 7000, 7006, 7960}
Hose Inspection Form {0374, 0599, 5057, 5057}
Hose Inspection Form {0374, 0599, 5057, 5057}
Service Letter-NACD
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN WHEEL DOZERS AND WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN WHEEL DOZERS AND WHEEL LOADERS
Service Letter-Australia
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN WHEEL DOZERS AND WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN WHEEL DOZERS AND WHEEL LOADERS
Service Letter-CFEL
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN WHEEL DOZERS AND WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN WHEEL DOZERS AND WHEEL LOADERS
Service Letter-CSARL
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN WHEEL DOZERS AND WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN WHEEL DOZERS AND WHEEL LOADERS
Service Letter-Americas
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN WHEEL DOZERS AND WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN WHEEL DOZERS AND WHEEL LOADERS
Service Letter-Brazil
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
Remanufactured Fuel Injection Nozzles
Remanufactured Fuel Injection Nozzles
Tool Operating Manual
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
Caterpillar O-rings: Measuring Tool, Material Application, and Dash Size Cross Reference{0374, 0599, 0759, 0767, 7555}
Caterpillar O-rings: Measuring Tool, Material Application, and Dash Size Cross Reference{0374, 0599, 0759, 0767, 7555}
Service Letter-China
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN WHEEL DOZERS AND WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN WHEEL DOZERS AND WHEEL LOADERS
Service Letter-Asia
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN WHEEL DOZERS AND WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN WHEEL DOZERS AND WHEEL LOADERS
Reuse And Salvage Guidelines
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Application of Abrasion Resistant Material{0374, 0679, 0751, 0759, 6800}
Application of Abrasion Resistant Material{0374, 0679, 0751, 0759, 6800}
Service Letter-APD
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN WHEEL DOZERS AND WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN WHEEL DOZERS AND WHEEL LOADERS
Technical Analysis
Technical Analysis 1 (TA1) Visual Inspection for Large Wheel Dozers {0372, 0374, 1000, 7000, 753S, 7565}
Technical Analysis 1 (TA1) Visual Inspection for Large Wheel Dozers {0372, 0374, 1000, 7000, 753S, 7565}
Disassembly and Assembly
Fuel Filter
3406 VEHICULAR ENGINE FOR 824C TRACTOR, 825C & 826C COMPACTO
Primary Fuel Filter And Base
3406 VEHICULAR ENGINE FOR 824C TRACTOR, 825C & 826C COMPACTO
Connecting Rod Bearings
3406 VEHICULAR ENGINE FOR 824C TRACTOR, 825C & 826C COMPACTO
Crankshaft Main Bearings
3406 VEHICULAR ENGINE FOR 824C TRACTOR, 825C & 826C COMPACTO
Camshaft Bearings
3406 VEHICULAR ENGINE FOR 824C TRACTOR, 825C & 826C COMPACTO
Anti-Pivot Link
824C TRACTOR, 825C & 826C COMPACTORS POWER TRAIN
Anti-Pivot Link
824C TRACTOR, 825C & 826C COMPACTOR VEHICLE SYSTEMS
Hydraulic Tank Oil Filter
824C TRACTOR, 825C & 826C COMPACTOR VEHICLE SYSTEMS
Service Magazine
New Sealing Washer Used Under Retainer Nut On Primary Fuel Filter{1260}
1980/07/14
Warning: Use Correct Seal On Seat Assembly For Valve Group In Steering Valve Group{4307,4312,4322}
1980/12/01
Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Lubricant Recommendations Changed For All Caterpillar Engines To Combat Effects Of Fuel Sulfur{1318,0375,0374,1280}
1982/05/03
New Address For Repair Of Diagnostic Tools{0650}
1982/06/14
Added Methods To Decrease The Effects Of High Sulfur Fuels{1355,1280,1318,1000}
1982/08/30
New Oil Additives Can Cause High Copper (Cu) Indications During S.O.S. Tests{0372,1318}
1982/09/27
Dimensions For Reconditioning Cylinder Blocks, Cylinder Heads{1201,1101,1103,1105}
1982/12/20
Dimensions For Reconditioning Cylinder Blocks, Cylinder Heads{1201,1101,1103,1105}
1984/04/23
Remanufactured Oil Pumps Available{1304}
1984/06/04
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Engine Information Plate Contains More Data; Use Of Performance Specifications{1250,7557}
1985/10/28
Remanufactured Crankshafts Are Available In Standard And Two Undersize Dimensions (U.S. and Canada){1202,7754}
1985/11/18
Canister Size Of Coolant Conditioner Element Has Changed{1350}
1985/11/25
Gasket Leakage On Aftermarket Fuel Filters{1261}
1985/12/16
Fuel Sulfur Analyzer Available{0651,1280,1318}
1986/01/13
Engine Oil Filter Element Has Metal Wrapper Instead Of Paper Wrapper{1318}
1986/03/10
Requirements For Shipping Wet Batteries In The U.S.{1401,7500}
1986/04/07
Three Types Of Maintenance Management Publications Available For Engines{0374}
1986/06/09
New 5P7307 Engine Turning Tool Group Fits All Engines{0611}
1977/02/14
Tools To Remove Wear Sleeves From Crankshafts{0621,7558}
1977/04/18
Improved 5P3000 Engine And Transmission Shipping Stand Assembly; Modification Available For Stands Already In Use{0640}
1977/04/25
Safety Vent Caps For Caterpillar Batteries{1401}
1977/07/11
Tools Now Available To Ream And/Or Hone 0.500&quot; (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Polarity Connections And Use Of Service Meter Films When Service Meter Kits Are Installed{7480,7000}
1987/02/16
Some 2P4005 Oil Filter Assemblies May Be Difficult To Install{1318}
1987/02/16
Check For Plugged Orifices In Mechanical Pressure Gauges{7450}
1987/03/02
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
3400 Engine Major Component Performance Guide Available{0374}
1987/07/06
Use 6V100 Tool Arrangement To Remove And Install Piston Pin Bearings For Both Tapered And Standard Connecting Rods{0620,1218}
1978/04/24
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
Analyzing Caterpillar And Competitive Antifreezes For Amount Of Silicates{1350,1395}
1988/02/22
New Publication Available-&quot;Diesel Fuels And Your Engine&quot;{0374,0375,0645}
1988/03/21
Extraction Tools For &quot;Live Oil Sampling&quot;{7770,0770,0781,0783,0784}
1988/04/18
Current Chart For Dynamometer Adapters{0651,1000}
1979/01/22
Stronger Suction Bell Assembly Now Used In Engine Oil Lines Group{1318,1307}
1979/02/05
Use Correct Procedure To Clean The Engine Lubrication System If Permanent Type Antifreeze (Ethylene Glycol) Is In The Engine{1318,1350}
1979/02/19
How To Extend The Service Life Of 1P5550 Fuel Cam Locking Tool Assembly{0654,1250}
1979/04/16
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Caution Label Added To 5P4150 Nozzle Testing Group{0651}
1979/07/09
Splash Shields Added To Caterpillar Fuel Injection Test Bench{0652}
1979/08/13
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Use Caution To Prevent Damage To Plastic Check Valve In Hydraulic Oil Tank And Transmission Oil Tank Drain{5056,3177}
1979/09/03
Engine Oil Viscosity Changed To SAE 10W/30 For Shipment From All U.S. Factories{1318}
1979/10/15
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Publication Available-&quot;Coolant And Your Engine&quot;{1395,0374,0375}
1989/02/13
New Engine Wall Charts Give Maintenance Management Recommendations{0374,0375,7500,7557,7580}
1989/03/06
Preventive Maintenance For Batteries{1401}
1989/03/27
Special Instruction, &quot;Battery Charging Rate And Time Tables,&quot; Available On Oil Resistant Paper{0374,1401}
1989/06/19
Improved Head Gasket Used; Summary Of Earlier Gaskets And Service Tips{1124,1216,1221}
1989/08/21
New Connecting Rod Bearing Used{0372,1203,1219}
1989/08/21
Engine Coolant Can Be Recycled{1395}
1989/11/13
New Cooling System Cleaner Now Available For All Engines{1350,0680,1352,1353}
1989/12/25
Reconditioning Of Bridge Wear Seat Is Permitted; Will Prevent Bridge Replacement When Not Necessary{1121}
1990/04/30
Updated List Of Charts And Decals Available For Lubrication And Maintenance Intervals{0374,0375,7500,7557,7581}
1990/08/06
Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts{1202}
1991/01/07
Air Filter Maintenance{1051,1054}
1991/09/30
Light Green Gasket Material On Secondary Air Filter Elements May Stick To Filter Housing{1054,1051}
1992/02/10
Identification Plate For Starting/Charging Diagnostic Connector {1450,7557,7569}
1994/02/28
Improved 1R-0712 Fuel Filter Provides Improved Sealing{1261}
1994/03/28
Updated List Of Charts And Decals Available For Lubrication And Maintenance Intervals{0374,0375,7557}
1994/04/04
Lubricant Will Ease Installation Of Secondary Radial Seal Air Filter Element {1054}
1994/04/25
Installation Procedure For 1R-0716 Engine Oil Filter{1318}
1994/06/20
Different Fuel Filter Available To Prevent Premature Wear On Fuel Injection Pump Plungers And Barrels{1261,1251}
1994/07/11
Correction To Service Manual SENR5664 {0374}
1997/11/24
New Guideline For Product Information, SEBF8340, &quot; Fuel Systems Troubleshooting Guide For 3204, 3300, And 3400 Engines With New Scroll Fuel Systems (NSFS)&quot; Available {0374,1250}
1998/06/22
Service Information System Product Structure Link Change for Service Letters that Address Parts Stock Distribution {1000, 7000, 7750}
2001/08/20
Correction to Service Magazine , "Use the Technical Information Feedback Systems" {0374}
2001/12/03
A New Quick Coupler is Required to Extend the Service Life of Dual Purpose Valves {6129, 7542}
2002/01/21
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08
TA2 (Technical Analysis) Inspections are Now Available on SIS {0372, 1000, 7000, 753T, 7565}
2013/01/10
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Process to Print Collage Schematics {0374, 1000, 7000}
Process to Print Collage Schematics {0374, 1000, 7000}
New Service Information Content Is Now Available in Channel 1 {0374, 7000}
New Service Information Content Is Now Available in Channel 1 {0374, 7000}
New Seventeen Character Product Identification Number (PIN) {7557}
2001/03/19
Truck Engine News
The Primer Color Has Changed for All C15 and C18 Truck Engine Blocks {1201, 7559}
2012/12/21
Engine News
The Primer Color Has Changed for All C15 and C18 Commercial Engine Blocks {1201, 7559}
2012/12/21
Service Magazine
Use Only Paint To Mark Connecting Rod Caps For Torque-Turn Method {1218,1219}
1987/06/01
Lubrication Hole Removed From Differential Pinion Shaft{3254,3280}
1989/01/09
New Engine Wall Charts Give Maintenance Management Recommendations{0374,0375,7500,7557,7580}
1989/03/06
Updated List Of Charts And Decals Available For Lubrication And Maintenance Intervals{0374,0375,7500,7557,7581}
1990/08/06
Polyurethane Painting Process Used; Touch-up Paint And Paint Solvent Available For Parts Service{0652,7559,7581}
1994/04/18
Shop Chemicals are now Listed in Cat Shop Supplies and Hand Tools {0599, 0644, 0645}
2005/12/12
The Primer Color Has Changed for All C15 and C18 Machine Engine Blocks {1201, 7559}
2012/12/21
Truck Engine News
The Color of Certain O-Ring Seals Is Changing {7555}
2002/12/01
Engine News
The Color of Certain O-Ring Seals Is Changing {7555}
2003/01/01
Technical Information Bulletin
Caterpillar Parts Pricing{1000, 7000, 756P}
Caterpillar Parts Pricing{1000, 7000, 756P}
Special Instruction
Procedure for Ordering Vintage Parts {0374, 1000, 7000}
Procedure for Ordering Vintage Parts {0374, 1000, 7000}
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING REMANUFACTURED VANE CARTRIDGES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING REMANUFACTURED VANE CARTRIDGES FROM DEALER PARTS STOCK
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING 1J4757 BEARINGS IN DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING 1J4757 BEARINGS IN DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R8017 REMAN CYLINDER PACKS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R8017 REMAN CYLINDER PACKS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN ROCKER SWITCHES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN ROCKER SWITCHES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN REMAN CYLINDER HEADS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN REMAN CYLINDER HEADS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 338-3453 SOLENOIDS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 338-3453 SOLENOIDS FROM DEALER PARTS STOCK
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
The Steering System Flow Switch Needs To Be Parts Stock Changed On Certain IT18B And IT28B Tool Carriers, 613C, 615C, 621E, 623E, 627E, 631E, 637E, 651E And 657E Scrapers, 768C, 772B, 776C, 776B Tractors, 769C, 771C, 773B, 775B, 777B And 777C Trucks, 824C Compactors, 916, 926, 936, 936F, 950E, 950F, 960F, 966E, 966F, 970F, 980C And 980F Loaders
The Steering System Flow Switch Needs To Be Parts Stock Changed On Certain IT18B And IT28B Tool Carriers, 613C, 615C, 621E, 623E, 627E, 631E, 637E, 651E And 657E Scrapers, 768C, 772B, 776C, 776B Tractors, 769C, 771C, 773B, 775B, 777B And 777C Trucks, 824C Compactors, 916, 926, 936, 936F, 950E, 950F, 960F, 966E, 966F, 970F, 980C And 980F Loaders
Service Letter-Australia
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING REMANUFACTURED VANE CARTRIDGES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING REMANUFACTURED VANE CARTRIDGES FROM DEALER PARTS STOCK
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING 1J4757 BEARINGS IN DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING 1J4757 BEARINGS IN DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R8017 REMAN CYLINDER PACKS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R8017 REMAN CYLINDER PACKS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN ROCKER SWITCHES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN ROCKER SWITCHES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN REMAN CYLINDER HEADS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN REMAN CYLINDER HEADS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 338-3453 SOLENOIDS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 338-3453 SOLENOIDS FROM DEALER PARTS STOCK
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
The Steering System Flow Switch Needs To Be Parts Stock Changed On Certain IT18B And IT28B Tool Carriers, 613C, 615C, 621E, 623E, 627E, 631E, 637E, 651E And 657E Scrapers, 768C, 772B, 776C, 776B Tractors, 769C, 771C, 773B, 775B, 777B And 777C Trucks, 824C Compactors, 916, 926, 936, 936F, 950E, 950F, 960F, 966E, 966F, 970F, 980C And 980F Loaders
The Steering System Flow Switch Needs To Be Parts Stock Changed On Certain IT18B And IT28B Tool Carriers, 613C, 615C, 621E, 623E, 627E, 631E, 637E, 651E And 657E Scrapers, 768C, 772B, 776C, 776B Tractors, 769C, 771C, 773B, 775B, 777B And 777C Trucks, 824C Compactors, 916, 926, 936, 936F, 950E, 950F, 960F, 966E, 966F, 970F, 980C And 980F Loaders
Service Letter-CFEL
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING REMANUFACTURED VANE CARTRIDGES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING REMANUFACTURED VANE CARTRIDGES FROM DEALER PARTS STOCK
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING 1J4757 BEARINGS IN DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING 1J4757 BEARINGS IN DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R8017 REMAN CYLINDER PACKS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R8017 REMAN CYLINDER PACKS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN ROCKER SWITCHES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN ROCKER SWITCHES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN REMAN CYLINDER HEADS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN REMAN CYLINDER HEADS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 338-3453 SOLENOIDS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 338-3453 SOLENOIDS FROM DEALER PARTS STOCK
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
The Steering System Flow Switch Needs To Be Parts Stock Changed On Certain IT18B And IT28B Tool Carriers, 613C, 615C, 621E, 623E, 627E, 631E, 637E, 651E And 657E Scrapers, 768C, 772B, 776C, 776B Tractors, 769C, 771C, 773B, 775B, 777B And 777C Trucks, 824C Compactors, 916, 926, 936, 936F, 950E, 950F, 960F, 966E, 966F, 970F, 980C And 980F Loaders
The Steering System Flow Switch Needs To Be Parts Stock Changed On Certain IT18B And IT28B Tool Carriers, 613C, 615C, 621E, 623E, 627E, 631E, 637E, 651E And 657E Scrapers, 768C, 772B, 776C, 776B Tractors, 769C, 771C, 773B, 775B, 777B And 777C Trucks, 824C Compactors, 916, 926, 936, 936F, 950E, 950F, 960F, 966E, 966F, 970F, 980C And 980F Loaders
Service Letter-CSARL
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING REMANUFACTURED VANE CARTRIDGES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING REMANUFACTURED VANE CARTRIDGES FROM DEALER PARTS STOCK
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING 1J4757 BEARINGS IN DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING 1J4757 BEARINGS IN DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND CLEANING VARIOUS REMAN CYLINDER PACKS IN DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND CLEANING VARIOUS REMAN CYLINDER PACKS IN DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R8017 REMAN CYLINDER PACKS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R8017 REMAN CYLINDER PACKS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN ROCKER SWITCHES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN ROCKER SWITCHES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN REMAN CYLINDER HEADS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN REMAN CYLINDER HEADS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 338-3453 SOLENOIDS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 338-3453 SOLENOIDS FROM DEALER PARTS STOCK
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
The Steering System Flow Switch Needs To Be Parts Stock Changed On Certain IT18B And IT28B Tool Carriers, 613C, 615C, 621E, 623E, 627E, 631E, 637E, 651E And 657E Scrapers, 768C, 772B, 776C, 776B Tractors, 769C, 771C, 773B, 775B, 777B And 777C Trucks, 824C Compactors, 916, 926, 936, 936F, 950E, 950F, 960F, 966E, 966F, 970F, 980C And 980F Loaders
The Steering System Flow Switch Needs To Be Parts Stock Changed On Certain IT18B And IT28B Tool Carriers, 613C, 615C, 621E, 623E, 627E, 631E, 637E, 651E And 657E Scrapers, 768C, 772B, 776C, 776B Tractors, 769C, 771C, 773B, 775B, 777B And 777C Trucks, 824C Compactors, 916, 926, 936, 936F, 950E, 950F, 960F, 966E, 966F, 970F, 980C And 980F Loaders
Service Letter-Americas
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING REMANUFACTURED VANE CARTRIDGES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING REMANUFACTURED VANE CARTRIDGES FROM DEALER PARTS STOCK
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING 1J4757 BEARINGS IN DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING 1J4757 BEARINGS IN DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R8017 REMAN CYLINDER PACKS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R8017 REMAN CYLINDER PACKS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN ROCKER SWITCHES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN ROCKER SWITCHES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN REMAN CYLINDER HEADS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN REMAN CYLINDER HEADS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 338-3453 SOLENOIDS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 338-3453 SOLENOIDS FROM DEALER PARTS STOCK
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
The Steering System Flow Switch Needs To Be Parts Stock Changed On Certain IT18B And IT28B Tool Carriers, 613C, 615C, 621E, 623E, 627E, 631E, 637E, 651E And 657E Scrapers, 768C, 772B, 776C, 776B Tractors, 769C, 771C, 773B, 775B, 777B And 777C Trucks, 824C Compactors, 916, 926, 936, 936F, 950E, 950F, 960F, 966E, 966F, 970F, 980C And 980F Loaders
The Steering System Flow Switch Needs To Be Parts Stock Changed On Certain IT18B And IT28B Tool Carriers, 613C, 615C, 621E, 623E, 627E, 631E, 637E, 651E And 657E Scrapers, 768C, 772B, 776C, 776B Tractors, 769C, 771C, 773B, 775B, 777B And 777C Trucks, 824C Compactors, 916, 926, 936, 936F, 950E, 950F, 960F, 966E, 966F, 970F, 980C And 980F Loaders
Service Letter-Brazil
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
The Steering System Flow Switch Needs To Be Parts Stock Changed On Certain IT18B And IT28B Tool Carriers, 613C, 615C, 621E, 623E, 627E, 631E, 637E, 651E And 657E Scrapers, 768C, 772B, 776C, 776B Tractors, 769C, 771C, 773B, 775B, 777B And 777C Trucks, 824C Compactors, 916, 926, 936, 936F, 950E, 950F, 960F, 966E, 966F, 970F, 980C And 980F Loaders
The Steering System Flow Switch Needs To Be Parts Stock Changed On Certain IT18B And IT28B Tool Carriers, 613C, 615C, 621E, 623E, 627E, 631E, 637E, 651E And 657E Scrapers, 768C, 772B, 776C, 776B Tractors, 769C, 771C, 773B, 775B, 777B And 777C Trucks, 824C Compactors, 916, 926, 936, 936F, 950E, 950F, 960F, 966E, 966F, 970F, 980C And 980F Loaders
Service Letter-Truck/Ag/Marine
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING REMANUFACTURED VANE CARTRIDGES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING REMANUFACTURED VANE CARTRIDGES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R8017 REMAN CYLINDER PACKS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R8017 REMAN CYLINDER PACKS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN ROCKER SWITCHES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN ROCKER SWITCHES FROM DEALER PARTS STOCK
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Technical Information Bulletin
Caterpillar Parts Pricing{1000, 7000, 756P}
Caterpillar Parts Pricing{1000, 7000, 756P}
A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752}
A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752}
Service Letter-China
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING REMANUFACTURED VANE CARTRIDGES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING REMANUFACTURED VANE CARTRIDGES FROM DEALER PARTS STOCK
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING 1J4757 BEARINGS IN DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING 1J4757 BEARINGS IN DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R8017 REMAN CYLINDER PACKS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R8017 REMAN CYLINDER PACKS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN ROCKER SWITCHES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN ROCKER SWITCHES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN REMAN CYLINDER HEADS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN REMAN CYLINDER HEADS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 338-3453 SOLENOIDS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 338-3453 SOLENOIDS FROM DEALER PARTS STOCK
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
The Steering System Flow Switch Needs To Be Parts Stock Changed On Certain IT18B And IT28B Tool Carriers, 613C, 615C, 621E, 623E, 627E, 631E, 637E, 651E And 657E Scrapers, 768C, 772B, 776C, 776B Tractors, 769C, 771C, 773B, 775B, 777B And 777C Trucks, 824C Compactors, 916, 926, 936, 936F, 950E, 950F, 960F, 966E, 966F, 970F, 980C And 980F Loaders
The Steering System Flow Switch Needs To Be Parts Stock Changed On Certain IT18B And IT28B Tool Carriers, 613C, 615C, 621E, 623E, 627E, 631E, 637E, 651E And 657E Scrapers, 768C, 772B, 776C, 776B Tractors, 769C, 771C, 773B, 775B, 777B And 777C Trucks, 824C Compactors, 916, 926, 936, 936F, 950E, 950F, 960F, 966E, 966F, 970F, 980C And 980F Loaders
Service Letter-Asia
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING REMANUFACTURED VANE CARTRIDGES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING REMANUFACTURED VANE CARTRIDGES FROM DEALER PARTS STOCK
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING 1J4757 BEARINGS IN DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING 1J4757 BEARINGS IN DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R8017 REMAN CYLINDER PACKS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R8017 REMAN CYLINDER PACKS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN ROCKER SWITCHES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN ROCKER SWITCHES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN REMAN CYLINDER HEADS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN REMAN CYLINDER HEADS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 338-3453 SOLENOIDS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 338-3453 SOLENOIDS FROM DEALER PARTS STOCK
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
The Steering System Flow Switch Needs To Be Parts Stock Changed On Certain IT18B And IT28B Tool Carriers, 613C, 615C, 621E, 623E, 627E, 631E, 637E, 651E And 657E Scrapers, 768C, 772B, 776C, 776B Tractors, 769C, 771C, 773B, 775B, 777B And 777C Trucks, 824C Compactors, 916, 926, 936, 936F, 950E, 950F, 960F, 966E, 966F, 970F, 980C And 980F Loaders
The Steering System Flow Switch Needs To Be Parts Stock Changed On Certain IT18B And IT28B Tool Carriers, 613C, 615C, 621E, 623E, 627E, 631E, 637E, 651E And 657E Scrapers, 768C, 772B, 776C, 776B Tractors, 769C, 771C, 773B, 775B, 777B And 777C Trucks, 824C Compactors, 916, 926, 936, 936F, 950E, 950F, 960F, 966E, 966F, 970F, 980C And 980F Loaders
Service Letter-APD
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING REMANUFACTURED VANE CARTRIDGES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING REMANUFACTURED VANE CARTRIDGES FROM DEALER PARTS STOCK
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING 1J4757 BEARINGS IN DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING 1J4757 BEARINGS IN DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R8017 REMAN CYLINDER PACKS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R8017 REMAN CYLINDER PACKS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN ROCKER SWITCHES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN ROCKER SWITCHES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN REMAN CYLINDER HEADS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN REMAN CYLINDER HEADS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 338-3453 SOLENOIDS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 338-3453 SOLENOIDS FROM DEALER PARTS STOCK
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
The Steering System Flow Switch Needs To Be Parts Stock Changed On Certain IT18B And IT28B Tool Carriers, 613C, 615C, 621E, 623E, 627E, 631E, 637E, 651E And 657E Scrapers, 768C, 772B, 776C, 776B Tractors, 769C, 771C, 773B, 775B, 777B And 777C Trucks, 824C Compactors, 916, 926, 936, 936F, 950E, 950F, 960F, 966E, 966F, 970F, 980C And 980F Loaders
The Steering System Flow Switch Needs To Be Parts Stock Changed On Certain IT18B And IT28B Tool Carriers, 613C, 615C, 621E, 623E, 627E, 631E, 637E, 651E And 657E Scrapers, 768C, 772B, 776C, 776B Tractors, 769C, 771C, 773B, 775B, 777B And 777C Trucks, 824C Compactors, 916, 926, 936, 936F, 950E, 950F, 960F, 966E, 966F, 970F, 980C And 980F Loaders
Service Magazine
Part Number For Fuel Injection Pump Group In New Location{1253,1286}
1981/11/09
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Use Correct Part Numbers For Main And Connecting Rod Bearings{1230,1203,1219}
1982/04/12
New Bearing Standard: Quantity Of One Part Number Now Has Both Halves Of The Bearing{7551}
1982/08/09
Main And Connecting Rod Bearing Part Numbers {1203,1219,1230}
1987/01/26
Special Instruction
Use Of Preventive Maintenance Kits{7501}
Use Of Preventive Maintenance Kits{7501}
Installation Instructions for the Refill Desiccant Kit{4285}
Installation Instructions for the Refill Desiccant Kit{4285}
Service Magazine
Preventive Maintenance For Batteries{1401}
1989/03/27
Engine News
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Special Instruction
2W719 Turbocharger Cartridge Repair Kit{1053}
2W719 Turbocharger Cartridge Repair Kit{1053}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
2W715 Turbocharger Cartridge Repair Kit{1053}
2W715 Turbocharger Cartridge Repair Kit{1053}
7W4872 Turbocharger Cartridge Repair Kit{1053}
7W4872 Turbocharger Cartridge Repair Kit{1053}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Hose Inspection Form {0374, 0599, 5057, 5057}
Hose Inspection Form {0374, 0599, 5057, 5057}
Tool Operating Manual
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
<NOBR>439-3938</NOBR>, <NOBR>439-3939</NOBR>, <NOBR>439-3940</NOBR>, <NOBR>439-3941</NOBR>, <NOBR>439-3942</NOBR>, <NOBR>439-3943</NOBR> Link Bracket Assemblies {0374, 0599, 0632, 0700, 7000}
439-3938, 439-3939, 439-3940, 439-3941, 439-3942, 439-3943 Link Bracket Assemblies {0374, 0599, 0632, 0700, 7000}
1U-9600 Welding Group (U.S. and Canada) 1U-9601 Welding Group (All other countries){0599, 0679}
1U-9600 Welding Group (U.S. and Canada) 1U-9601 Welding Group (All other countries){0599, 0679}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}
Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}
Crimping 1028 Thermoplastic Hose, 2760 Reduced Diameter Thermoplastic Hose, and 1543 Air Conditioning Hose{0374, 0599, 0684, 1808, 1812, 7554}
Crimping 1028 Thermoplastic Hose, 2760 Reduced Diameter Thermoplastic Hose, and 1543 Air Conditioning Hose{0374, 0599, 0684, 1808, 1812, 7554}
464-0265 Lifting Bracket Assembly{0374, 0599, 0629, 0632, 0700, 0708, 1353}
464-0265 Lifting Bracket Assembly{0374, 0599, 0629, 0632, 0700, 0708, 1353}
442-1750 Lifting Plate{0374, 0599, 0629, 0632, 0700, 1122}
442-1750 Lifting Plate{0374, 0599, 0629, 0632, 0700, 1122}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
Portable Aqueous Based Parts Cleaners, Models 482-9830, 482-9831, and 482-9832 {0374, 0599, 0680, 0699}
Portable Aqueous Based Parts Cleaners, Models 482-9830, 482-9831, and 482-9832 {0374, 0599, 0680, 0699}
Reuse And Salvage Guidelines
Fundamentals of Arc Spray for Reconditioning Components {0679}
Fundamentals of Arc Spray for Reconditioning Components {0679}
Fundamentals of Flame Spray for Reconditioning Components {0100, 0599, 0679}
Fundamentals of Flame Spray for Reconditioning Components {0100, 0599, 0679}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Thermal Spray Procedures for Clutch Housing Piston Bore {0679, 3160, 3169}
Thermal Spray Procedures for Clutch Housing Piston Bore {0679, 3160, 3169}
Thermal Spray Procedures for Clutch Piston Inside Diameter {0679, 3160, 3170}
Thermal Spray Procedures for Clutch Piston Inside Diameter {0679, 3160, 3170}
Thermal Spray Procedures for Torque Converter Turbine Wheel {0679, 3101, 3131}
Thermal Spray Procedures for Torque Converter Turbine Wheel {0679, 3101, 3131}
Thermal Spray Procedures for Torque Converter Impeller {0679, 3101, 3134}
Thermal Spray Procedures for Torque Converter Impeller {0679, 3101, 3134}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Torque Converter Carrier - Seal Ring Bore {0374, 0599, 0679, 3101, 3135}
Thermal Spray Procedures for Torque Converter Carrier - Seal Ring Bore {0374, 0599, 0679, 3101, 3135}
Thermal Spray Procedures for Torque Converter Input Housing {0679, 3101, 3127}
Thermal Spray Procedures for Torque Converter Input Housing {0679, 3101, 3127}
Thermal Spray Procedures for Tyrone Drive Shaft (Pump Gear){0679, 3066, 5073}
Thermal Spray Procedures for Tyrone Drive Shaft (Pump Gear){0679, 3066, 5073}
Thermal Spray Procedures for Wheel Loader Trunnion Support {0679, 3260, 3268}
Thermal Spray Procedures for Wheel Loader Trunnion Support {0679, 3260, 3268}
Thermal Spray Procedures of Differential Carrier Assemblies for Wheel Loader, Wheel Dozer, Compactor, Integrated Toolcarrier, Articulated Truck, and Wheel Tractor Scraper (WTS) {0679, 3284}
Thermal Spray Procedures of Differential Carrier Assemblies for Wheel Loader, Wheel Dozer, Compactor, Integrated Toolcarrier, Articulated Truck, and Wheel Tractor Scraper (WTS) {0679, 3284}
Thermal Spray Procedures for One Piece Brake Anchor {0679, 4251}
Thermal Spray Procedures for One Piece Brake Anchor {0679, 4251}
Thermal Spray Procedures for Wheel Loaders, Off-Highway Trucks and Tractors, Articulated Trucks, Wheel Tractors, Compactors, and Integrated Toolcarriers Differential - Support Bearing Journal {0679, 3258, 3284}
Thermal Spray Procedures for Wheel Loaders, Off-Highway Trucks and Tractors, Articulated Trucks, Wheel Tractors, Compactors, and Integrated Toolcarriers Differential - Support Bearing Journal {0679, 3258, 3284}
Thermal Spray Procedures for Wheel Loaders, Articulated Trucks, Wheel Tractors, Compactors, and Integrated Toolcarriers Differential Case - Flange End {0679, 3258, 3284}
Thermal Spray Procedures for Wheel Loaders, Articulated Trucks, Wheel Tractors, Compactors, and Integrated Toolcarriers Differential Case - Flange End {0679, 3258, 3284}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Thermal Spray Procedures for Wheel Dozer and Integrated Toolcarrier Axle Housing {0679, 3260}
Thermal Spray Procedures for Wheel Dozer and Integrated Toolcarrier Axle Housing {0679, 3260}
Thermal Spray Procedures for IT And Wheel Dozer Spindle {0679, 4205}
Thermal Spray Procedures for IT And Wheel Dozer Spindle {0679, 4205}
Thermal Spray Procedures for Wheel Bores on IT, Wheel Dozer, and Compactors {0679, 4201}
Thermal Spray Procedures for Wheel Bores on IT, Wheel Dozer, and Compactors {0679, 4201}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Wheel Dozer, Integrated Toolcarrier, and Wheel Tractor Scraper Hub {0679, 4051}
Thermal Spray Procedures for Wheel Dozer, Integrated Toolcarrier, and Wheel Tractor Scraper Hub {0679, 4051}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Application of Abrasion Resistant Material{0374, 0679, 0751, 0759, 6800}
Application of Abrasion Resistant Material{0374, 0679, 0751, 0759, 6800}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
Service Magazine
6V2086 And 6V2087 Seal And Wear Sleeve Installers Available{0622,1160,1161}
1980/09/01
New Repair Kit Available For Vent Assemblies Used In Fast Fill Fuel Adapter Groups{1273}
1980/10/27
Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21
Reconditioning of Bridge Wear Seat Is Permitted; Will Prevent Bridge Replacement When Not Necessary{1100}
1982/03/08
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
Dimensions For Reconditioning Cylinder Blocks, Cylinder Heads{1201,1101,1103,1105}
1982/12/20
Reuse Of Engine Bearings{1230}
1983/05/16
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Bearing Repair Kit Available For Fan Belt Tightener{1358}
1983/12/12
Dimensions For Reconditioning Cylinder Blocks, Cylinder Heads{1201,1101,1103,1105}
1984/04/23
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect{1053}
1986/02/03
Increase Piston Reuse With Keystone Piston Ring Gauge Group{1214,1215}
1986/06/16
Salvage Of Cylinder Heads By Using Oversized Valve Guides And Valve Inserts {1104,1103}
1987/03/30
New Information On Reusable Cylinder Liners{1216}
1978/06/19
Salvage Of Turbocharger Compressor Housing During Reconditioning{1052}
1978/10/09
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning{1053}
1979/08/20
Improved Head Gasket Used; Summary Of Earlier Gaskets And Service Tips{1124,1216,1221}
1989/08/21
Reconditioning Of Bridge Wear Seat Is Permitted; Will Prevent Bridge Replacement When Not Necessary{1121}
1990/04/30
Smaller Connecting Rod Bolt Used In 4W6425 Air Compressor; Use Correct Torque{1803}
1991/05/27
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Truck Engine News
A Guide to Reman Product Markings is Now Available {7754}
2015/09/18
Engine News
A Guide to Reman Product Markings is Now Available {7754}
2015/09/17
Special Instruction
Installation of 0R1160, 0R1161 and 0R1248 Remanufactured Cylinder Head Groups{1100}
Installation of 0R1160, 0R1161 and 0R1248 Remanufactured Cylinder Head Groups{1100}
Installation of 0R0918 Remanufactured Oil Pump{1304, 7754}
Installation of 0R0918 Remanufactured Oil Pump{1304, 7754}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
A Guide to Cat<SUP>&reg;</SUP> Reman Product Markings {7754}
A Guide to Cat® Reman Product Markings {7754}
Technical Information Bulletin
Remanufactured Fuel Injection Nozzles
Remanufactured Fuel Injection Nozzles
0R-3711, 0R-3714, 0R-3751, 0R-3752 Remanufactured Long Blocks
0R-3711, 0R-3714, 0R-3751, 0R-3752 Remanufactured Long Blocks
Tool Operating Manual
1U-9600 Welding Group (U.S. and Canada) 1U-9601 Welding Group (All other countries){0599, 0679}
1U-9600 Welding Group (U.S. and Canada) 1U-9601 Welding Group (All other countries){0599, 0679}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
Reuse And Salvage Guidelines
Fundamentals of Arc Spray for Reconditioning Components {0679}
Fundamentals of Arc Spray for Reconditioning Components {0679}
Thermal Spray Procedures for Clutch Housing Piston Bore {0679, 3160, 3169}
Thermal Spray Procedures for Clutch Housing Piston Bore {0679, 3160, 3169}
Thermal Spray Procedures for Clutch Piston Inside Diameter {0679, 3160, 3170}
Thermal Spray Procedures for Clutch Piston Inside Diameter {0679, 3160, 3170}
Thermal Spray Procedures for Torque Converter Turbine Wheel {0679, 3101, 3131}
Thermal Spray Procedures for Torque Converter Turbine Wheel {0679, 3101, 3131}
Thermal Spray Procedures for Torque Converter Impeller {0679, 3101, 3134}
Thermal Spray Procedures for Torque Converter Impeller {0679, 3101, 3134}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Torque Converter Carrier - Seal Ring Bore {0374, 0599, 0679, 3101, 3135}
Thermal Spray Procedures for Torque Converter Carrier - Seal Ring Bore {0374, 0599, 0679, 3101, 3135}
Thermal Spray Procedures for Torque Converter Input Housing {0679, 3101, 3127}
Thermal Spray Procedures for Torque Converter Input Housing {0679, 3101, 3127}
Thermal Spray Procedures for Tyrone Drive Shaft (Pump Gear){0679, 3066, 5073}
Thermal Spray Procedures for Tyrone Drive Shaft (Pump Gear){0679, 3066, 5073}
Thermal Spray Procedures for Wheel Loader Trunnion Support {0679, 3260, 3268}
Thermal Spray Procedures for Wheel Loader Trunnion Support {0679, 3260, 3268}
Thermal Spray Procedures of Differential Carrier Assemblies for Wheel Loader, Wheel Dozer, Compactor, Integrated Toolcarrier, Articulated Truck, and Wheel Tractor Scraper (WTS) {0679, 3284}
Thermal Spray Procedures of Differential Carrier Assemblies for Wheel Loader, Wheel Dozer, Compactor, Integrated Toolcarrier, Articulated Truck, and Wheel Tractor Scraper (WTS) {0679, 3284}
Thermal Spray Procedures for One Piece Brake Anchor {0679, 4251}
Thermal Spray Procedures for One Piece Brake Anchor {0679, 4251}
Thermal Spray Procedures for Wheel Loaders, Off-Highway Trucks and Tractors, Articulated Trucks, Wheel Tractors, Compactors, and Integrated Toolcarriers Differential - Support Bearing Journal {0679, 3258, 3284}
Thermal Spray Procedures for Wheel Loaders, Off-Highway Trucks and Tractors, Articulated Trucks, Wheel Tractors, Compactors, and Integrated Toolcarriers Differential - Support Bearing Journal {0679, 3258, 3284}
Thermal Spray Procedures for Wheel Loaders, Articulated Trucks, Wheel Tractors, Compactors, and Integrated Toolcarriers Differential Case - Flange End {0679, 3258, 3284}
Thermal Spray Procedures for Wheel Loaders, Articulated Trucks, Wheel Tractors, Compactors, and Integrated Toolcarriers Differential Case - Flange End {0679, 3258, 3284}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Thermal Spray Procedures for Wheel Dozer and Integrated Toolcarrier Axle Housing {0679, 3260}
Thermal Spray Procedures for Wheel Dozer and Integrated Toolcarrier Axle Housing {0679, 3260}
Thermal Spray Procedures for IT And Wheel Dozer Spindle {0679, 4205}
Thermal Spray Procedures for IT And Wheel Dozer Spindle {0679, 4205}
Thermal Spray Procedures for Wheel Bores on IT, Wheel Dozer, and Compactors {0679, 4201}
Thermal Spray Procedures for Wheel Bores on IT, Wheel Dozer, and Compactors {0679, 4201}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Wheel Dozer, Integrated Toolcarrier, and Wheel Tractor Scraper Hub {0679, 4051}
Thermal Spray Procedures for Wheel Dozer, Integrated Toolcarrier, and Wheel Tractor Scraper Hub {0679, 4051}
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
Service Magazine
Remanufactured Short Blocks Are Available For Repairs Of Early 3406 Engines{1201,1101,1102}
1980/03/31
Special Cup Plugs For Use In Oversize (Larger Than Standard Size) Bores In Valve Rocker Arm Shafts{1102}
1980/09/15
Remanufactured Undersize Crankshafts Are Available{1202}
1983/11/21
Remanufactured Oil Pumps Available{1304}
1984/06/04
Remanufactured Cylinder Head Groups{1100,1101,7554}
1984/11/19
Remanufactured Air Fuel Ratio Controls {1278,7754}
1985/01/14
Remanufactured Crankshafts Are Available In Standard And Two Undersize Dimensions (U.S. and Canada){1202,7754}
1985/11/18
Oversize Bearings For Turbocharger Center Housings Available {1053,1052}
1987/03/30
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
Remanufactured Camshafts And Cam Kits Available For Parts Service{1210,1211,1212}
1990/12/17
Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts{1202}
1991/01/07
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN){1254}
1992/04/20
Be Sure The Fuel Injection Pump Housing Is Compatible With 0R0715 And 0R2545 Remanufactured Short Blocks{1201,1253}
1992/08/31
Damper Requirements For Remanufactured Short Blocks{1205}
1993/08/16
Additional Parts Required For Remanufactured Short Block{1200}
1993/09/27
Remanufactured 3400 Cylinder Heads Now Use Intake And Exhaust Valves With Chrome Plated Valve Stems{1105}
1994/09/05
Cracks In Phenolic Water Pump Impellers In Remanufactured Water Pumps {1364}
1995/03/06
Clearly Mark all of the Cracks on the Cylinder Head {1101, 7754}
2006/04/10
Cat<SUP>&reg;</SUP> Reman Announces Additional Engine Options for Certain Cat Machine Applications {1000}
2015/07/08
A Guide to Reman Product Markings is Now Available {7754}
2015/09/15
Requirements For Shipping Wet Batteries In The U.S.{1401,7500}
1986/04/07
Improved 5P3000 Engine And Transmission Shipping Stand Assembly; Modification Available For Stands Already In Use{0640}
1977/04/25
New Engine Wall Charts Give Maintenance Management Recommendations{0374,0375,7500,7557,7580}
1989/03/06
Updated List Of Charts And Decals Available For Lubrication And Maintenance Intervals{0374,0375,7500,7557,7581}
1990/08/06
Lubricity Limit Added To Preferred Distillate Fuel Recommendation {1280,7568}
1997/08/18
Tool Operating Manual
Using The Inspection Borescopes 1U5268 and 8T9290 Borescopes
Using The Inspection Borescopes 1U5268 and 8T9290 Borescopes
Instructions for 1U9801 Ultrasonic Wear Indicator Program Module Replacement{0767}
Instructions for 1U9801 Ultrasonic Wear Indicator Program Module Replacement{0767}
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
Install and Test Fuel Injection Pumps Used on 3406B, 3406C, and 3406 PEEC Engines Using the 4C-8192 Heavy-Duty Coupling Group on the Fuel Injection Equipment Test Stand{1251}
Install and Test Fuel Injection Pumps Used on 3406B, 3406C, and 3406 PEEC Engines Using the 4C-8192 Heavy-Duty Coupling Group on the Fuel Injection Equipment Test Stand{1251}
Service Magazine
Changes To 9S240 Rack Position Tool Group; Revision To Special Instructions{0653,0374,1250}
1980/05/05
6V2086 And 6V2087 Seal And Wear Sleeve Installers Available{0622,1160,1161}
1980/09/01
New Puller Tools Available For Removal Of Steering Cylinder Pin{0621,4303,7058}
1981/01/19
6V3129 Nozzle Puller Group And FT1533 Nozzle Assembly Adapter Can Be Used To Remove Fuel Nozzles{0621,1254}
1981/02/02
New Tool Makes Glow Plug Wire Removal Easier {0622,0621,1403}
1981/03/23
6V3197 Spacer, 6V3041 Tool Group Available For Use During Removal and Installation Of Piston Pin Bearings{0622,1219,1218,1214}
1981/03/30
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
New Engine Testing And Adjusting Tools Give More Accuracy And Longer Service Life{0651}
1982/02/01
Use 6V6035 Hardness Tester On Crankshafts{0651,1202}
1982/02/22
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Separate Valve Stem Gauges Available{0653,1000}
1982/06/07
New Address For Repair Of Diagnostic Tools{0650}
1982/06/14
6V6124 Calibration Coil Available To Calibrate And Check 6V4910 AC/DC Clamp-On Ammeter{0651}
1982/06/28
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Vacuum Tester Checks For Leaks Between Valve Face and Seat{0651,1103,1105}
1982/09/06
Dial Bore Gauge And Size Setting Fixture Available{0653}
1982/09/20
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
6V6142 And 6V6143 Installers Can Be Used To Install Crankshaft Seals And Wear Sleeves{0622,0626,1160,1161}
1982/11/01
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
Make Change To 6V2100 Multitach And 5P9698 Calibrator{0651}
1982/11/15
6V4869 Adapter And 6V6174 Plug Can Be Used To Install Camshaft Bearings{1211,0621}
1982/11/22
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Use Vacuum Tester For Quality Control Check Of Water Pump Seal{0652,1361}
1983/02/28
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Fuel Setting And Air Fuel Ratio Control Adjustment Tools For 3406B Engines{0650,1264,1257,1278}
1984/03/26
New Tools Available To Service Fuel Injection Nozzles And Adapters {0706,1254}
1985/01/14
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Fuel Sulfur Analyzer Available{0651,1280,1318}
1986/01/13
Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16
New Engine Timing Indicator Group Available {0781,0782}
1986/07/07
Stronger Drivers Used With Demountable Rims{4202,4203}
1986/10/13
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Use Gas Detector Tubes That Have Expired Dates To &quot;Break In&quot; The Combustion Chambers For The Fuel Sulphur Analyzer Group{0651}
1986/11/10
Check For Dirt Before Replacing Pyrometer Switch{1050,7466}
1986/12/15
New Special Instruction For Troubleshooting 5P2150 Engine Horsepower Meter{0651,1250}
1977/01/17
New Tie Bars Improve Stability Of The Fuel Injection Test Bench{0652}
1977/01/17
New 5P7307 Engine Turning Tool Group Fits All Engines{0611}
1977/02/14
Tools To Remove Wear Sleeves From Crankshafts{0621,7558}
1977/04/18
Tools To Install Crankshaft Seal And Wear Sleeve{1160,1161,0622}
1977/07/11
Tools Now Available To Ream And/Or Hone 0.500&quot; (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Troubleshooting The Tachometer System Of The 4S6553 Engine Instrument Group{0651}
1977/10/10
Fabricated Extension Prevents Fuel &quot;Splash&quot; During Injection Valve Testing{0650,1254}
1977/10/17
Assembly Procedure For The 5P4721 Tube (Part Of The 5P4149 Conversion Group And 5P4150 Nozzle Testing Group){0650}
1977/10/24
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23
Black Light Leak Detection Kit Available For Oil, Fuel and Cooling Systems {0774,1250,1300,1350}
1987/05/11
The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11
Two New Self-Powered Digital Tachometers And Signal Generator Available {7462}
1987/05/11
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09
Probable Causes Of Low Fuel Delivery During Testing On Fuel Injection Test Benches{0650,1250}
1978/02/06
Replacement Seal Group For Water Pump Impeller Now Has All The Seal Parts Plus An Installation Tool{1361,0622}
1978/02/13
5P4149 Conversion Group To Become A Discontinued Item On October 1, 1978{0650,1254}
1978/03/27
Locating Bushings For The 5P3550 Rod Boring Machine Will Now Hold Tapered Piston Pin Bushings {0626}
1978/04/17
Use 6V100 Tool Arrangement To Remove And Install Piston Pin Bearings For Both Tapered And Standard Connecting Rods{0620,1218}
1978/04/24
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New 5P8744 Adapter Assembly And Special Instruction Procedures For 5P4150 Nozzle Tester Group{0650}
1978/08/28
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Adjustment Procedures And Lubrication Recommendations For Drive Pulleys On Caterpillar Fuel Injection Test Bench{0652}
1978/09/25
4J7533 O-Ring Seals Now Available For Parts Service Of The 5P4150 Nozzle Tester Group{0651}
1978/10/09
Caterpillar Fuel Injection Test Bench Book{0374}
1978/10/16
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04
3.5&quot;, 4.0&quot;, 5.5&quot;, 5.75&quot; Socket Wrenches Available For Removal Of Differential Pinion Shaft Nuts{0601,3258}
1988/03/14
Extraction Tools For &quot;Live Oil Sampling&quot;{7770,0770,0781,0783,0784}
1988/04/18
Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
Installation Of Valves For Live Oil Sampling{7770,0770,0781,0783,0784}
1988/06/06
Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12
New 6V87 Gauge Measures Valve Stem Wear{0653,1105}
1979/01/08
Current Chart For Dynamometer Adapters{0651,1000}
1979/01/22
How To Extend The Service Life Of 1P5550 Fuel Cam Locking Tool Assembly{0654,1250}
1979/04/16
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
6V183 Gasket Now Available For Parts Service To Use On 5P4150 Or 8S2242 Nozzle Tester{0651}
1979/06/25
Fuel Injection Line For Injection Test Bench Is Available From Caterpillar{0652,1250}
1979/07/02
Caution Label Added To 5P4150 Nozzle Testing Group{0651}
1979/07/09
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Splash Shields Added To Caterpillar Fuel Injection Test Bench{0652}
1979/08/13
Quick Disconnect Coupling On Optional Modification Of 5P4150 Nozzle Tester Permits Faster Exchange Of Adapters{0651,1254}
1979/09/03
Tee Handle Hexagonal Wrench In Rack Adjusting Tool Is Now Available For Parts Replacement
1979/09/10
Fast Fuel Delivery Couplings And Fast Oil Change Couplings Are Available For All Caterpillar Equipment{0671,1273,1279,1325}
1979/10/08
Use The 6V2034 Micrometer Adapter To Measure Lip Thickness Of Engine Valves {0653,1105}
1979/10/29

Truck sale:

Caterpillar 824C
 
Caterpillar 824C
- Wheel dozers
HOLT CAT
Caterpillar 824C, Wheel dozers, Construction
35,000 
Caterpillar 824C, Wheel dozers, Construction
- Wheel dozers
PETERSON TRACTOR CO
Caterpillar 824C, Wheel Loaders, Construction
12,501 
Caterpillar 824C, Wheel Loaders, Construction

MICHIGAN CAT
Caterpillar 824C, Construction
25,000 
Caterpillar 824C, Construction
- Dozers
WHAYNE SUPPLY COMPANY
Caterpillar 824C, Construction
 
Caterpillar 824C, Construction
- Wheel Loaders
GREGORY POOLE EQUIPMENT CO.