BASIC ENGINE
VALVE MECHANISM GPAIR COMPRESSOR GP
PAN GP-OIL
SUPPRESSION GP-SOUND
PISTON & ROD GP
BASIC ENGINE
VALVE MECHANISM GP
#SEBP48120070
148-7482: MECHANISM GP-FUEL PUMP & VALVE
For full view, you need register
Parts for your 824C WHEEL DOZER:
CATERPILLAR SIS#SEBP48120071
190-0009: MECHANISM GP-FUEL PUMP & VALVE
190-0009 MECHANISM GP-FUEL PUMP & VALVE
S/N LHX15363-24917
S/N LHX15363-24917
For full view, you need register
Parts for your 824C WHEEL DOZER:
CATERPILLAR SIS#SEBP48120072
190-0009: MECHANISM GP-FUEL PUMP & VALVE
190-0009 MECHANISM GP-FUEL PUMP & VALVE
S/N LHX24918-99999
S/N LHX24918-99999
For full view, you need register
Parts for your 824C WHEEL DOZER:
CATERPILLAR SIS#SEBP48120073
188-1754: MOUNTING GP-ALTERNATOR & COMPR
188-1754 MOUNTING GP-ALTERNATOR & COMPR
S/N TXG2726-UP; LHX15363-99999
S/N TXG2726-UP; LHX15363-99999
For full view, you need register
Parts for your 824C WHEEL DOZER:
CATERPILLAR SIS#SEBP48120074
239-5527: PAN GP-OIL
239-5527 PAN GP-OIL -ENGINE
S/N TXG2726-UP; LHX15363-99999
S/N TXG2726-UP; LHX15363-99999
For full view, you need register
Parts for your 824C WHEEL DOZER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4P-7373 | [1] | TUBE AS | |
| 3. | 115-2359 | [1] | TUBE AS | |
| 4. | 115-2365 | [1] | BRACKET-TUBE | |
| 5. | 118-2019 | [1] | UNDERFRAME AS | |
| 6. | 168-5248 | [1] | SEAL-ISOLATION | |
| 7. | 227-3004 | [1] | PAN-OIL | |
| 8. | 0L-1351 | [3] | BOLT (3/8-16X0.875-IN) | |
| 9. | 0S-1591 | [4] | BOLT (3/8-16X1.5-IN) | |
| 10. | 0S-1594 | [5] | BOLT (3/8-16X1-IN) | |
| 11. | 5P-5846 | [1] | SEAL-O-RING | |
| 12. | 5P-8068 | [1] | SEAL-O-RING | |
| 13. | 2K-4973 | [2] | LOCKNUT (3/8-16-THD) | |
| 14. | 5M-2894 | [7] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 15. | 9X-6458 | [5] | WASHER-HARD (10.2X22.5X3-MM THK) |
#SEBP48120075
174-3874: PANEL GP-SOUND SUPPRESSION
174-3874 PANEL GP-SOUND SUPPRESSION
S/N TXG2726-UP; LHX15363-99999
LEFT HAND MOUNTED SOUND PANEL
FOR USE WITH BRAKESAVER OR NON-BRAKESAVER ENGINES, ALL APPLICATIONS
S/N TXG2726-UP; LHX15363-99999
LEFT HAND MOUNTED SOUND PANEL
FOR USE WITH BRAKESAVER OR NON-BRAKESAVER ENGINES, ALL APPLICATIONS
For full view, you need register
Parts for your 824C WHEEL DOZER:
CATERPILLAR SIS#SEBP48120076
227-9980: PANEL GP-SOUND SUPPRESSION
227-9980 PANEL GP-SOUND SUPPRESSION -ENGINE FRONT HOUSING
S/N TXG2726-UP; LHX15363-99999
CANNOT BE USED WITH ALTERNATOR MOUNTING GROUPS AND ACCESSORY DRIVE GROUPS
S/N TXG2726-UP; LHX15363-99999
CANNOT BE USED WITH ALTERNATOR MOUNTING GROUPS AND ACCESSORY DRIVE GROUPS
For full view, you need register
Parts for your 824C WHEEL DOZER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 324-6804 | [1] | COVER AS (SOUND SUPPRESSION) | |
| 2. | 0S-1588 | [1] | BOLT (3/8-16X1.25-IN) | |
| 3. | 0S-1594 | [3] | BOLT (3/8-16X1-IN)(MARKED X) | |
| 4. | 0T-0055 | [2] | BOLT (3/8-16X4.25-IN) | |
| 5. | 1A-5964 | [4] | BOLT (3/8-16X4.5-IN)(MARKED Y) | |
| 6. | 5M-2894 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 7. | 9S-8752 | [1] | NUT-FULL (3/8-16-THD) | |
| 8. | 9X-6458 | [9] | WASHER-HARD (10.2X22.5X3-MM THK) |
#SEBP48120077
229-2863: PISTON & ROD GP
For full view, you need register
Parts for your 824C WHEEL DOZER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 151-5925 | [1] | BOLT (7/16-14-THD) | |
| 2. | 164-4187 | [1] | RING-PISTON (INTERMEDIATE) | |
| 3. | 180-7350 | [1] | PIN-PISTON | |
| 4. | 276-4637 | [1] | TUBE AS-OIL JET | |
| 5. | 224-3245 | [1] | ROD AS | |
| 5A. | 219-4458 | [2] | PIN-DOWEL | |
| 5B. | 213-3217 | [4] | BOLT (M11X1.25X84-MM) | |
| 5C. | 229-6259 | [1] | BEARING | |
| 6. | 224-3246 | [1] | BEARING-CONNECTING ROD (STANDARD) | |
| 232-3235 AB | BEARING-CONNECTING ROD (0.64-MM US) | |||
| 232-3236 AB | BEARING-CONNECTING ROD (1.27-MM US) | |||
| 7. | 247-6123 J | [1] | BODY AS-PISTON | |
| -OR- | ||||
| 346-6616 L | [1] | BODY AS-PISTON | ||
| 8. | 230-2569 J | [2] | RETAINER-PIN | |
| -OR- | ||||
| 250-2940 L | [2] | RETAINER-PIN | ||
| 9. | 295-5422 CJ | [1] | RING-PISTON-TOP | |
| -OR- | ||||
| 310-4188 L | [1] | RING-PISTON (TOP) | ||
| 10. | 238-0294 J | [1] | RING-PISTON (OIL) | |
| -OR- | ||||
| 306-4014 L | [1] | RING-PISTON (OIL) | ||
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| J | WHEN REUSING BODY ASSEMBLY 247-6123 ORDER PARTS MARKED J | |||
| L | WHEN USING NEW BODY ASSEMBLY 346-6616 ORDER PARTS MARKED L | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP48120078
229-2863: PISTON & ROD GP
For full view, you need register
Parts for your 824C WHEEL DOZER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 151-5925 | [1] | BOLT (7/16-14-THD) | |
| 2. | 164-4187 | [1] | RING-PISTON (INTERMEDIATE) | |
| 3. | 180-7350 | [1] | PIN-PISTON | |
| 4. | 276-4637 | [1] | TUBE AS-OIL JET | |
| 5. | 224-3245 | [1] | ROD AS | |
| 5A. | 219-4458 | [2] | PIN-DOWEL | |
| 5B. | 213-3217 | [4] | BOLT (M11X1.25X84-MM) | |
| 5C. | 229-6259 | [1] | BEARING | |
| 6. | 224-3246 | [1] | BEARING-CONNECTING ROD (STANDARD) | |
| 232-3235 AB | BEARING-CONNECTING ROD (0.64-MM US) | |||
| 232-3236 AB | BEARING-CONNECTING ROD (1.27-MM US) | |||
| 7. | 247-6123 J | [1] | BODY AS-PISTON | |
| -OR- | ||||
| 346-6616 L | [1] | BODY AS-PISTON | ||
| 8. | 230-2569 J | [2] | RETAINER-PIN | |
| -OR- | ||||
| 250-2940 L | [2] | RETAINER-PIN | ||
| 9. | 247-6130 CJ | [1] | RING-PISTON-TOP | |
| -OR- | ||||
| 310-4188 L | [1] | RING-PISTON (TOP) | ||
| 10. | 238-0294 J | [1] | RING-PISTON (OIL) | |
| -OR- | ||||
| 306-4014 L | [1] | RING-PISTON (OIL) | ||
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| J | WHEN REUSING BODY ASSEMBLY 247-6123 ORDER PARTS MARKED J | |||
| L | WHEN USING NEW BODY ASSEMBLY 346-6616 ORDER PARTS MARKED L | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP48120079
229-2863: PISTON & ROD GP
For full view, you need register
Parts for your 824C WHEEL DOZER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 151-5925 | [1] | BOLT (7/16-14-THD) | |
| 2. | 164-4187 | [1] | RING-PISTON (INTERMEDIATE) | |
| 3. | 524-5565 | [1] | PIN-PISTON | |
| 4. | 276-4637 | [1] | TUBE AS-OIL JET | |
| 5. | 224-3245 | [1] | ROD AS | |
| 5A. | 219-4458 | [2] | PIN-DOWEL | |
| 5B. | 213-3217 | [4] | BOLT (M11X1.25X84-MM) | |
| 5C. | 229-6259 | [1] | BEARING | |
| 6. | 261-3450 | [1] | BEARING-CONNECTING ROD (STANDARD) | |
| 232-3235 AB | BEARING-CONNECTING ROD (0.64-MM US) | |||
| 232-3236 AB | BEARING-CONNECTING ROD (1.27-MM US) | |||
| 7. | 388-9354 C | [1] | BODY AS-PISTON | |
| 8. | 250-2940 C | [2] | RETAINER-PIN | |
| 9. | 247-6130 C | [1] | RING-PISTON-TOP | |
| 10. | 306-4014 C | [1] | RING-PISTON (OIL) | |
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
Information:
BASIC ENGINE
VALVE MECHANISM GP
Truck Engine News
Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209}
2012/10/08
2012/10/08
Engine News
Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209}
2012/10/08
2012/10/08
Cat<SUP>®</SUP> Reman Announces Changes to the Remanufactured Injector Rocker Arms for 3406E, 3456, C15, C16, C18, C27, and, C32 Engines {1123}
Cat® Reman Announces Changes to the Remanufactured Injector Rocker Arms for 3406E, 3456, C15, C16, C18, C27, and, C32 Engines {1123}
Cat® Reman Announces Changes to the Remanufactured Injector Rocker Arms for 3406E, 3456, C15, C16, C18, C27, and, C32 Engines {1123}
Special Instruction
Installation of 0R1160, 0R1161 and 0R1248 Remanufactured Cylinder Head Groups{1100}
Installation of 0R1160, 0R1161 and 0R1248 Remanufactured Cylinder Head Groups{1100}
Installation of 0R1160, 0R1161 and 0R1248 Remanufactured Cylinder Head Groups{1100}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Use Of The 5P7333 Tool Group For Bridge Dowel Repair{1101}
Use Of The 5P7333 Tool Group For Bridge Dowel Repair{1101}
Use Of The 5P7333 Tool Group For Bridge Dowel Repair{1101}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Valve Bridges are Included with Cylinder Heads{1102, 1123}
Valve Bridges are Included with Cylinder Heads{1102, 1123}
Valve Bridges are Included with Cylinder Heads{1102, 1123}
Rocker Valley Inserts Are Now Used in Remanufactured Cylinder Heads{1100, 1102}
Rocker Valley Inserts Are Now Used in Remanufactured Cylinder Heads{1100, 1102}
Rocker Valley Inserts Are Now Used in Remanufactured Cylinder Heads{1100, 1102}
Technical Information Bulletin
Failures of the 305-6843 Guide Spring on Certain Engines{1102, 1121, 1123, 1209}
Failures of the 305-6843 Guide Spring on Certain Engines{1102, 1121, 1123, 1209}
Failures of the 305-6843 Guide Spring on Certain Engines{1102, 1121, 1123, 1209}
3406C 7E-0329 Valve Cover Base Quality Containment {1107, 1120}
3406C 7E-0329 Valve Cover Base Quality Containment {1107, 1120}
3406C 7E-0329 Valve Cover Base Quality Containment {1107, 1120}
Specifications
Tool Operating Manual
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
Reuse And Salvage Guidelines
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Testing and Adjusting
Disassembly and Assembly
Valve Mechanism Cover Base - Remove and Install
3406E and 3456 Engines for Caterpillar Built Machines
3406E and 3456 Engines for Caterpillar Built Machines
Service Magazine
Remanufactured Short Blocks Are Available For Repairs Of Early 3406 Engines{1201,1101,1102}
1980/03/31
1980/03/31
Indications Of Engine Overspeeding When Only One Cam Lobe/Lifter Has Failed{1000,1100,1200}
1986/09/08
1986/09/08
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
1977/05/16
Tools Now Available To Ream And/Or Hone 0.500" (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
1977/08/22
Camshaft Lobe Surface Finish Improved; Camshaft Drive Gear Installation Procedure {1209,1210,1212}
1993/09/13
1993/09/13
Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209}
2012/10/08
2012/10/08
A New Tool Is Used to Insert the Valve Lifter Guide Spring into Certain Machine Engines {0703, 1102}
2012/12/03
2012/12/03
Cat<SUP>®</SUP> Reman Announces Changes to the Remanufactured Injector Rocker Arms for 3406E, 3456, C15, C16, C18, C27, and, C32 Machine Engines {1123}
Cat® Reman Announces Changes to the Remanufactured Injector Rocker Arms for 3406E, 3456, C15, C16, C18, C27, and, C32 Machine Engines {1123}
Cat® Reman Announces Changes to the Remanufactured Injector Rocker Arms for 3406E, 3456, C15, C16, C18, C27, and, C32 Machine Engines {1123}
