AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

319-7401 SEAL GP-CRANKSHAFT -FRONT S/N TXG2726-UP; LHX15363-99999 PART OF 223-9731 CRANKSHAFT GP FOR USE WITH CW ROTATION 824C


BASIC ENGINE
CRANKSHAFT GP
MOUNTING GP-ENGINE
LUBRICATION SYSTEM
PUMP GP-ENGINE OIL
FILLER GP-ENGINE OIL
FILTER GP-ENGINE OIL
FUMES DISPOSAL GP
GUIDE GP-OIL LEVEL
LINES GP-ENGINE OIL

WHEEL DOZER 824C WHEEL DOZER 85X
 C15 Engine Emissions Retrofit Repower Tier III For 825C, 826C Compactor And 824C Wheel Tractor 85X00001-UP (MACHINE) SEBP4812 824C 85X   (1978)

BASIC ENGINE

CRANKSHAFT GP
CRANKSHAFT GP
223-9731 CRANKSHAFT GP
SEAL GP-CRANKSHAFT
319-0785 SEAL GP-CRANKSHAFT
SEAL GP-CRANKSHAFT
319-7401 SEAL GP-CRANKSHAFT
 

#SEBP48120100
 

319-7401: SEAL GP-CRANKSHAFT

319-7401 SEAL GP-CRANKSHAFT -FRONT
S/N TXG2726-UP; LHX15363-99999
PART OF 223-9731 CRANKSHAFT GP
FOR USE WITH CW ROTATION
i02957871 SEBP4812
3197401 SEAL GP-CRANKSHAFT Parts scheme
  For full view, you need register

Parts for your 824C WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 142-5867 [1] SEAL-CRANKSHAFT (FRONT)  
 

#SEBP48120101
 

227-9495: SUPPORT GP-ENGINE

227-9495 SUPPORT GP-ENGINE
S/N TXG2726-UP; LHX15363-99999
i01920142 SEBP4812
2279495 SUPPORT GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 824C WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-3968 [1] BRACKET-SUPPORT  
2. 0S-1591 [2] BOLT (3/8-16X1.5-IN)  
3. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
 

#SEBP48120102
 

232-4648: SUPPORT GP-ENGINE

232-4648 SUPPORT GP-ENGINE
S/N TXG2726-UP; LHX15363-99999
FOR USE WITH AXLE OIL COOLER
i01900865 SEBP4812
2324648 SUPPORT GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 824C WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6F-5282 [8] BOLT (1/2-13X5.25-IN)  
2. 232-1768 [1] SUPPORT AS  
3. 2M-0849 [8] WASHER-HARD (13.5X25.5X5-MM THK)  
 

#SEBP48120103
 

4N-2481: FASTENER GP-OIL PUMP MOUNTING

4N-2481 FASTENER GP-OIL PUMP MOUNTING -ENGINE
S/N TXG2726-UP; LHX15363-99999
i00090164 SEBP4812
4N2481 FASTENER GP-OIL PUMP MOUNTING Parts scheme
  For full view, you need register

Parts for your 824C WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0L-1143 [2] BOLT (3/8-16X2.5-IN)  
2. 0S-1590 [1] BOLT (3/8-16X2-IN)  
3. 5M-2894 [3] WASHER-HARD (10.2X18.5X2.5-MM THK)  
 

#SEBP48120104
 

317-6078: FILLER GP-ENGINE OIL

317-6078 FILLER GP-ENGINE OIL
S/N TXG2726-UP; LHX15363-99999
i02884080 SEBP4812
3176078 FILLER GP-ENGINE OIL Parts scheme
  For full view, you need register

Parts for your 824C WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9L-8439 [1] CAP-OIL FILLER (ENGINE)  
2. 144-8976 [1] SPACER (11X25.4X26-MM THK)(10.5X22X8-MM THK)  
3. 197-1488 [1] TUBE AS-OIL FILLER  
4. 317-6077 [1] BRACKET AS  
  1F-0750 [1] NUT-WELD (3/8-16-THD)  
5. 0S-1588 [2] BOLT (3/8-16X1.25-IN)  
6. 0L-2070 [1] BOLT (3/8-16X2.25-IN)  
7. 0S-1594 [2] BOLT (3/8-16X1-IN)  
8. 5M-2894 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
9. 325-0106 [1] CLIP  
10. 210-9246 [1] SEAL-O-RING  
11. 9X-6458 [1] WASHER-HARD (10.2X22.5X3-MM THK)  
 

#SEBP48120105
 

263-5373: FILTER GP-ENGINE OIL

263-5373 FILTER GP-ENGINE OIL
S/N TXG2726-UP; LHX15363-99999
i02443208 SEBP4812
2635373 FILTER GP-ENGINE OIL Parts scheme
  For full view, you need register

Parts for your 824C WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1R-1808 [1] FILTER-ENGINE OIL (ADVANCED EFFICIENCY)  
2. 2P-3760 [1] GASKET  
3. 2P-3761 [1] COVER  
4. 2P-4301 [1] BASE AS-OIL FILTER  
4A. 2P-4304 [1] STUD-HOLLOW  
5. 2P-4305 [2] GASKET  
6. 259-8357 [1] ADAPTER-OIL FILTER  
7. 4N-8150 [1] SPRING  
8. 8C-3445 [1] CAP-DUST  
9. 321-8649 [1] VALVE AS-FLUID SAMPLING (ENGINE OIL)  
9A. 214-7566 [1] SEAL-O-RING  
  8C-3446 [1] VALVE-SAMPLING  
10. 392-9208 [1] PLUNGER-VALVE (RELIEF)  
11. 191-0965 [1] SHIELD-OIL FILTER  
12. 249-7734 [1] COVER  
14. 0S-1588 [6] BOLT (3/8-16X1.25-IN)  
15. 0S-1590 [4] BOLT (3/8-16X2-IN)  
16. 0S-1594 [4] BOLT (3/8-16X1-IN)  
17. 398-5601 [1] PLUG AS  
  238-5081 [1] SEAL-O-RING  
  360-3681 [1] PLUG (7/8-14-THD)  
18. 389-3708 [1] PLUG AS  
  214-7568 [1] SEAL-O-RING  
  360-3679 [1] PLUG-CONNECTOR (9/16-18-THD)  
20. 5M-2894 [14] WASHER-HARD (10.2X18.5X2.5-MM THK)  
21. 7F-9090 [2] SCREW-DRIVE (NO 8X3/8-IN)  
25. 9S-8752 [4] NUT-FULL (3/8-16-THD)  
 

#SEBP48120106
 

237-1965: FUMES DISPOSAL GP

237-1965 FUMES DISPOSAL GP
S/N TXG2726-UP; LHX15363-99999
i02055414 SEBP4812
2371965 FUMES DISPOSAL GP Parts scheme
  For full view, you need register

Parts for your 824C WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2N-8109 [1] CLAMP  
2. 5P-1255 E HOSE (10-CM)(FUMES DISPOSAL)  
3. 9M-2904 [2] CLAMP-HOSE  
4. 199-5061 [1] TUBE (DISPOSAL)  
5. 320-7713 [1] BRACKET AS  
5A. 1F-0750 [1] NUT-WELD (3/8-16-THD)  
6. 0L-1351 [1] BOLT (3/8-16X0.875-IN)  
7. 0S-0509 [1] BOLT (3/8-16X0.75-IN)  
8. 0S-1588 [1] BOLT (3/8-16X1.25-IN)  
9. 4N-4668 [1] BREATHER AS (CRANKCASE)  
10. 1B-7182 [1] BOLT (5/16-18X1.25-IN)  
11. 2S-2053 [2] CLIP  
12. 6V-3831 [1] SEAL-O-RING (CRANKCASE BREATHER)  
13. 5M-2894 [3] WASHER-HARD (10.2X18.5X2.5-MM THK)  
14. 9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
  E   ORDER BY THE CENTIMETER
 

#SEBP48120107
 

263-7309: GUIDE GP-OIL LEVEL GAUGE

263-7309 GUIDE GP-OIL LEVEL GAUGE -ENGINE
S/N TXG2726-UP; LHX15363-99999
RIGHT HAND FRONT
i02500387 SEBP4812
2637309 GUIDE GP-OIL LEVEL GAUGE Parts scheme
  For full view, you need register

Parts for your 824C WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4S-5719 [1] SPACER (10.31X25X12.7-MM THK)  
2. 161-1827 [1] TUBE AS  
3. 165-6170 J [3] PLUG  
4. 168-6865 [1] GAUGE AS-OIL LEVEL (DIPSTICK) (ENGINE OIL)  
5. 279-9503 C [1] BRACKET AS  
  1F-0750 [1] NUT-WELD (3/8-16-THD)  
6. 279-9504 C [1] BRACKET AS  
  1F-0750 [1] NUT-WELD (3/8-16-THD)  
7. 0L-2070 [1] BOLT (3/8-16X2.25-IN)  
8. 0S-0509 C [2] BOLT (3/8-16X0.75-IN)  
9. 118-5068 [1] SEAL-O-RING  
10. 4B-0418 [1] CLIP  
11. 5M-2894 C [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
12. 0L-1351 [1] BOLT (3/8-16X0.875-IN)  
  C   CHANGE FROM PREVIOUS TYPE
  J   USE TO PLUG OPTIONAL DIPSTICK LOCATIONS
 

#SEBP48120108
 

263-7309: GUIDE GP-OIL LEVEL GAUGE

263-7309 GUIDE GP-OIL LEVEL GAUGE -ENGINE
S/N TXG2726-UP
RIGHT HAND FRONT
i07372633 SEBP4812
2637309 GUIDE GP-OIL LEVEL GAUGE Parts scheme
  For full view, you need register

Parts for your 824C WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 091-0081 C [1] SPACER (10.5X20X10-MM THK)  
2. 8T-1887 C [1] CLIP (SLOT)  
3. 8T-1888 C [1] CLIP (TAB)  
4. 161-1827 [1] TUBE AS  
5. 165-6170 [3] PLUG  
6. 168-6865 [1] GAUGE AS-OIL LEVEL (DIPSTICK)  
7. 279-9504 [1] BRACKET AS  
  1F-0750 [1] NUT-WELD (3/8-16-THD)  
8. 0L-1351 [1] BOLT (3/8-16X0.875-IN)  
9. 0L-2070 [1] BOLT (3/8-16X2.25-IN)  
10. 0S-0509 C [1] BOLT (3/8-16X0.75-IN)  
11. 118-5068 [1] SEAL-O-RING  
12. 353-7957 C [1] GROMMET  
13. 5M-2894 C [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
14. 9X-6458 C [1] WASHER-HARD (10.2X22.5X3-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP48120109
 

219-4443: LINES GP-ENGINE OIL

219-4443 LINES GP-ENGINE OIL -FILTER
S/N TXG2726-UP; LHX15363-99999
i01924716 SEBP4812
2194443 LINES GP-ENGINE OIL Parts scheme
  For full view, you need register

Parts for your 824C WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-6137 [1] TUBE AS  
2. 2P-3760 [1] GASKET  
3. 4N-0826 [1] ELBOW  
4. 4N-1216 [1] TUBE-COOLER BYPASS (ENGINE OIL)  
5. 4N-8150 [1] SPRING  
6. 392-9208 [1] PLUNGER-VALVE (RELIEF)  
7. 203-0147 [1] TUBE AS  
8. 223-5814 [1] BODY-COOLER BYPASS (ENGINE OIL)  
9. 0S-1588 [4] BOLT (3/8-16X1.25-IN)  
10. 0S-1594 [10] BOLT (3/8-16X1-IN)  
11. 321-8642 [2] PLUG AS  
    (EACH INCLUDES)
  9S-8003 [1] PLUG (1/2-20-THD)  
  214-7567 [1] SEAL-O-RING  
12. 2N-3350 [2] SEAL-O-RING  
13. 2P-3761 [1] COVER  
14. 3E-6790 [1] SEAL-O-RING  
15. 113-5304 [2] SEAL-O-RING  
16. 5M-2894 [6] WASHER-HARD (10.2X18.5X2.5-MM THK)  
17. 5P-8068 [2] SEAL-O-RING  
18. 8C-5230 [2] SEAL-O-RING  
 

Information:

Truck Engine News
New Front Crankshaft Seals and New Rear Crankshaft Seals are Now in Production {1160, 1161}
2003/05/01
Engine News
New Front Crankshaft Seals and New Rear Crankshaft Seals are Now in Production {1160, 1161}
2003/05/01
Special Instruction
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Special Handling Information For Installation Of 2W1733 Or 2W1734 Crankshaft Seal Group{1160, 1161, 1202}
Special Handling Information For Installation Of 2W1733 Or 2W1734 Crankshaft Seal Group{1160, 1161, 1202}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Short Blocks And Crankshafts{1202, 1204, 1206}
Installation Of Short Blocks And Crankshafts{1202, 1204, 1206}
Inspection and/or Repair Procedure to Replace Broken Crankshafts in C-15, C-16, C15, 3406C, 3406E, and 3456 Engines{1202}
Inspection and/or Repair Procedure to Replace Broken Crankshafts in C-15, C-16, C15, 3406C, 3406E, and 3456 Engines{1202}
Specifications
Crankshaft (Earlier)
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Crankshaft (Later)
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Connecting Rod And Main Bearing Journals
3406C ENGINE FOR CATERPILLAR BUILT MACHINES
Crankshaft
3406C ENGINE FOR CATERPILLAR BUILT MACHINES
Tool Operating Manual
362-4250 Deck Height Measuring Tool{1201}
362-4250 Deck Height Measuring Tool{1201}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Reuse And Salvage Guidelines
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Testing and Adjusting
Excessive Bearing Wear - Inspect
3406E and 3456 Engines for Caterpillar Built Machines
Main Bearings - Inspect
3406E and 3456 Engines for Caterpillar Built Machines
Disassembly and Assembly
Crankshaft Front Seal & Wear Sleeve
3406C DIESEL ENGINES FOR CATERPILLAR BUILT MACHINES
Crankshaft Rear Seal & Wear Sleeve
3406C DIESEL ENGINES FOR CATERPILLAR BUILT MACHINES
Crankshaft Main Bearings
3406C DIESEL ENGINES FOR CATERPILLAR BUILT MACHINES
Crankshaft
3406C DIESEL ENGINES FOR CATERPILLAR BUILT MACHINES
Crankshaft Front Seal And Wear Sleeve
3406 VEHICULAR ENGINE FOR 824C TRACTOR, 825C & 826C COMPACTO
Crankshaft Main Bearings
3406 VEHICULAR ENGINE FOR 824C TRACTOR, 825C & 826C COMPACTO
Crankshaft Rear Seal And Wear Sleeve
3406 VEHICULAR ENGINE FOR 824C TRACTOR, 825C & 826C COMPACTO
Crankshaft
3406 VEHICULAR ENGINE FOR 824C TRACTOR, 825C & 826C COMPACTO
Bearing Clearance - Check
C15 and C18 Engines for Caterpillar Built Machines
Crankshaft Front Seal - Install
3406E and 3456 Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Remove
3406E and 3456 Engines for Caterpillar Built Machines
Crankshaft Front Seal - Remove
3406E and 3456 Engines for Caterpillar Built Machines
Crankshaft - Remove
3406E and 3456 Engines for Caterpillar Built Machines
Crankshaft - Install
3406E and 3456 Engines for Caterpillar Built Machines
Crankshaft Rear Seal - Remove
3406E and 3456 Engines for Caterpillar Built Machines
Crankshaft Rear Seal - Install
3406E and 3456 Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Install
3406E and 3456 Engines for Caterpillar Built Machines
Crankshaft Rear Seal - Install
C15 and C18 Engines for Caterpillar Built Machines
Crankshaft Front Seal - Remove
C15 and C18 Engines for Caterpillar Built Machines
Crankshaft Front Seal - Install
C15 and C18 Engines for Caterpillar Built Machines
Crankshaft - Remove
C15 and C18 Engines for Caterpillar Built Machines
Crankshaft - Install
C15 and C18 Engines for Caterpillar Built Machines
Crankshaft Rear Seal - Remove
C15 and C18 Engines for Caterpillar Built Machines
Service Magazine
6V2086 And 6V2087 Seal And Wear Sleeve Installers Available{0622,1160,1161}
1980/09/01
New Connecting Rod And Main Bearings Have A Thicker Coating (Layer) Of Lead-Tin Overlay{1230,1219,1203}
1981/01/19
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Use 6V6035 Hardness Tester On Crankshafts{0651,1202}
1982/02/22
Use Correct Part Numbers For Main And Connecting Rod Bearings{1230,1203,1219}
1982/04/12
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Wider Crankshaft Gear Used{1202,1204,1206}
1982/10/11
New Crankshaft Assemblies{1202,1204,1206,1207,1212}
1982/11/01
6V6142 And 6V6143 Installers Can Be Used To Install Crankshaft Seals And Wear Sleeves{0622,0626,1160,1161}
1982/11/01
New Connecting Rod Bearings Used{1219,1230}
1983/04/04
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
New Connecting Rod And Main Bearings Used{1203,1219,1226,1227,1230}
1983/10/10
Crankshaft Failures{1202,1230}
1983/11/21
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Remanufactured Undersize Crankshafts Are Available{1202}
1983/11/21
Install Crankshaft Thrust Bearings Correctly To Avoid Damage{1202,1203}
1985/02/11
New Crankshaft Seal Groups Used On More 3400 Series Engines{1160,1161}
1985/03/11
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
Remanufactured Crankshafts Are Available In Standard And Two Undersize Dimensions (U.S. and Canada){1202,7754}
1985/11/18
Crankshaft Seal Usage On 3400 Series Engines{1160,1161}
1985/12/16
Service Reminders For 3400 Family Of Diesel Engines{1204,1214,1331}
1986/05/05
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Improved Main And Connecting Rod Bearings Have Aluminum Alloy With More Strength{1230}
1977/01/17
Tools To Remove Wear Sleeves From Crankshafts{0621,7558}
1977/04/18
Tools To Install Crankshaft Seal And Wear Sleeve{1160,1161,0622}
1977/07/11
Some Wobble Is Acceptable In Rubber Vibration Dampers For Crankshafts{1205}
1977/10/31
Crankshaft Support Groups Are Available To Measure Bent Crankshafts{0653,1202}
1977/11/07
Main And Connecting Rod Bearing Part Numbers {1203,1219,1230}
1987/01/26
Mid-Life Bearing Maintenance Recommendations {1203}
1987/09/14
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
New Design Thrust Plate Used In Crankshaft Group{1201,1202,1203}
1979/08/27
New Bronze Thrust Plate Used On Center Main Bearing Of Crankshaft Groups{1203}
1990/12/17
Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts{1202}
1991/01/07
New Crankshaft Seal Groups Provide Increased Protection From Dirt And Dust{1160,1161}
1991/07/08
New 3406 (11N) Machine Engine Uses Different Components Than 3406 (70V) Machine Engine{1202,1218,1219}
1992/06/15
Oil Holes In Crankshaft Main And Rod Journals{1202}
1992/11/09
Damper Requirements For Remanufactured Short Blocks{1205}
1993/08/16
New Engine Crankshaft Rubber Damper Assembly Uses Improved Rubber Material{1205}
1994/10/03
Wear Sleeve Removal Tooling May "Mark" The Crankshaft{1202,1161}
1995/08/14
Recommendations For Inspection And Replacement Of Rubber and Viscous Crankshaft Dampers{1205}
1995/08/21
Points To Remember When Replacing A Viscous Crankshaft Damper Assembly With A Rubber Crankshaft Damper Assembly {1205}
1997/01/27
Use the 171-7212 Wear Sleeve to Repair the Crankshaft Hub {1160}
2011/09/20
New Front Crankshaft Seals and New Rear Crankshaft Seals are Now in Production {1160, 1161}
2006/06/26
A New Type of Main Bearing is Available {1202, 1203}
2004/05/03
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16
Inspection and/or Repair Procedure to Replace Crankshafts on Machine Engines {1202}
2009/10/29
Use Reuse and Salvage Guidelines for Measurements of Crankshafts {1202}
2006/10/09
Procedure for Crankshafts that will not Rotate after Installation during a Rebuild {1000, 1202}
2008/09/08

Caterpillar Parts SIS Catalog 824C :

SEAL GP-CRANKSHAFT
319-0785 SEAL GP-CRANKSHAFT
ROCKER ARM GP
437-3875 ROCKER ARM GP
ROCKER ARM GP
437-3866 ROCKER ARM GP
ROCKER ARM GP
437-3864 ROCKER ARM GP
ROCKER ARM GP
437-3862 ROCKER ARM GP
ROCKER ARM GP
328-4239 ROCKER ARM GP
ROCKER ARM GP
328-4238 ROCKER ARM GP
ROCKER ARM GP
328-4237 ROCKER ARM GP
SUPPORT GP-ENGINE
227-9495 SUPPORT GP-ENGINE
SUPPORT GP-ENGINE
232-4648 SUPPORT GP-ENGINE
FASTENER GP-OIL PUMP MOUNTING
4N-2481 FASTENER GP-OIL PUMP MOUNTING
FILLER GP-ENGINE OIL
317-6078 FILLER GP-ENGINE OIL
FILTER GP-ENGINE OIL
263-5373 FILTER GP-ENGINE OIL
FUMES DISPOSAL GP
237-1965 FUMES DISPOSAL GP
GUIDE GP-OIL LEVEL GAUGE
263-7309 GUIDE GP-OIL LEVEL GAUGE
GUIDE GP-OIL LEVEL GAUGE
263-7309 GUIDE GP-OIL LEVEL GAUGE

Truck sale:

Caterpillar 824C
 
Caterpillar 824C
- Wheel dozers
HOLT CAT
Caterpillar 824C, Wheel dozers, Construction
35,000 
Caterpillar 824C, Wheel dozers, Construction
- Wheel dozers
PETERSON TRACTOR CO
Caterpillar 824C, Wheel Loaders, Construction
12,501 
Caterpillar 824C, Wheel Loaders, Construction

MICHIGAN CAT
Caterpillar 824C, Construction
25,000 
Caterpillar 824C, Construction
- Dozers
WHAYNE SUPPLY COMPANY
Caterpillar 824C, Construction
 
Caterpillar 824C, Construction
- Wheel Loaders
GREGORY POOLE EQUIPMENT CO.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.