AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

3408E Engine Emissions Retrofit Repower Tier I For D8L Tractor 53Y00001-UP (MACHINE) BASIC ENGINE Caterpillar SIS



TRACK-TYPE TRACTOR D8L TRACK-TYPE TRACTOR 53Y
 3408E Engine Emissions Retrofit Repower Tier I For D8L Tractor 53Y00001-UP (MACHINE) SEBP4813 D8L 53Y   (1981)

Parts group D8L:

  For full view, you need register
BASIC ENGINE
BELT TIGHTENER GP
BELT TENSIONER GP
114-5540 BELT TENSIONER GP
114-5540 BELT TENSIONER GP
S/N 53Y1-UP
PART OF 314-4172 INSTALLATION GP-ENGINE
CAMSHAFT GP
CAMSHAFT GP
108-1547 CAMSHAFT GP
108-1547 CAMSHAFT GP
S/N 99C7569-UP
CRANKSHAFT GP
CRANKSHAFT AS
1W-5009 CRANKSHAFT AS
1W-5009 CRANKSHAFT AS
S/N 99C7569-UP
PART OF 1W-5010 CRANKSHAFT GP
CRANKSHAFT GP
1W-5010 CRANKSHAFT GP
1W-5010 CRANKSHAFT GP
S/N 99C7569-UP
SEAL GP-CRANKSHAFT
319-0785 SEAL GP-CRANKSHAFT
319-0785 SEAL GP-CRANKSHAFT -REAR
S/N 99C7569-UP
PART OF 1W-5010 CRANKSHAFT GP
FOR USE WITH CCW ROTATION
SEAL GP-CRANKSHAFT
319-7401 SEAL GP-CRANKSHAFT
319-7401 SEAL GP-CRANKSHAFT -FRONT
S/N 99C7569-UP
PART OF 1W-5010 CRANKSHAFT GP
FOR USE WITH CW ROTATION
CYLINDER BLOCK GP
COVER GP-CYLINDER BLOCK
130-7301 COVER GP-CYLINDER BLOCK
130-7301 COVER GP-CYLINDER BLOCK
S/N 99C7569-UP
COVER GP-CYLINDER BLOCK
130-7303 COVER GP-CYLINDER BLOCK
130-7303 COVER GP-CYLINDER BLOCK
S/N 99C7569-UP
CYLINDER BLOCK AS
110-3779 CYLINDER BLOCK AS
110-3779 CYLINDER BLOCK AS
S/N 99C7569-UP
PART OF 109-9009 CYLINDER BLOCK GP
CYLINDER BLOCK AS
122-2245 CYLINDER BLOCK AS
122-2245 CYLINDER BLOCK AS
S/N 99C7569-UP
PART OF 110-3779 CYLINDER BLOCK AS
CYLINDER BLOCK GP
109-9009 CYLINDER BLOCK GP
109-9009 CYLINDER BLOCK GP
S/N 99C7569-UP
PLUG GP-CYLINDER BLOCK
134-2596 PLUG GP-CYLINDER BLOCK
134-2596 PLUG GP-CYLINDER BLOCK
S/N 99C7569-UP
CYLINDER HEAD GP
CYLINDER HEAD AS
143-0040 CYLINDER HEAD AS
143-0040 CYLINDER HEAD AS
S/N 99C7569-UP
PART OF 143-0041, 143-3614 CYLINDER HEAD AS
FIELD REPLACEMENT ORDER @@@@@143-0041@@@@@
CYLINDER HEAD AS
143-0041 CYLINDER HEAD AS
143-0041 CYLINDER HEAD AS
S/N 99C7569-UP
FIELD REPLACEMENT FOR @@@@@143-0040@@@@@
CYLINDER HEAD AS
143-3614 CYLINDER HEAD AS
143-3614 CYLINDER HEAD AS
S/N 99C7569-UP
PART OF 107-7320 CYLINDER HEAD GP
CYLINDER HEAD GP
107-7320 CYLINDER HEAD GP
107-7320 CYLINDER HEAD GP
S/N 99C7569-UP
PART OF 130-7312 CYLINDER HEAD GP
CYLINDER HEAD GP
130-7312 CYLINDER HEAD GP
130-7312 CYLINDER HEAD GP
S/N 99C7569-UP
PLUG GP-CYLINDER HEAD
124-4456 PLUG GP-CYLINDER HEAD
124-4456 PLUG GP-CYLINDER HEAD
S/N 99C7569-UP
DAMPER GP
DAMPER & PULLEY GP
116-6566 DAMPER & PULLEY GP
116-6566 DAMPER & PULLEY GP
S/N 99C7569-UP
DRIVE GP-PUMP
DRIVE GP-UNIT INJ HYD PUMP
125-3428 DRIVE GP-UNIT INJ HYD PUMP
125-3428 DRIVE GP-UNIT INJ HYD PUMP
S/N 99C7569-UP
DRIVE GP-UNIT INJ HYD PUMP
180-6649 DRIVE GP-UNIT INJ HYD PUMP
180-6649 DRIVE GP-UNIT INJ HYD PUMP
S/N 99C7569-UP
PART OF 125-3428 DRIVE GP-UNIT INJ HYD PUMP
FLYWHEEL GP
FLYWHEEL GP
2W-8025 FLYWHEEL GP
2W-8025 FLYWHEEL GP
S/N 99C7569-UP
GEAR GP-REAR
7N-9574 GEAR GP-REAR
7N-9574 GEAR GP-REAR
S/N 99C7569-UP
GEAR GP
GEAR GP-FRONT
126-7281 GEAR GP-FRONT
126-7281 GEAR GP-FRONT
S/N 99C7569-UP
GEAR GP-REAR
7N-9574 GEAR GP-REAR
7N-9574 GEAR GP-REAR
S/N 99C7569-UP
HOUSING GP-FLYWHEEL
COVER GP-FLYWHEEL HOUSING
4N-6876 COVER GP-FLYWHEEL HOUSING
4N-6876 COVER GP-FLYWHEEL HOUSING
S/N 99C7569-UP
HOUSING GP-FLYWHEEL
128-2982 HOUSING GP-FLYWHEEL
128-2982 HOUSING GP-FLYWHEEL
S/N 99C7569-UP
HOUSING GP-FRONT
GEAR GP-FRONT
126-7281 GEAR GP-FRONT
126-7281 GEAR GP-FRONT
S/N 99C7569-UP
HOUSING GP-FRONT
127-3514 HOUSING GP-FRONT
127-3514 HOUSING GP-FRONT
S/N 99C7569-9970
HOUSING GP-FRONT
127-3514 HOUSING GP-FRONT
127-3514 HOUSING GP-FRONT
S/N 99C9971-UP
LIFTING GP-ENGINE
LIFTING GP-ENGINE
124-4461 LIFTING GP-ENGINE
124-4461 LIFTING GP-ENGINE
S/N 99C7569-UP
MOUNTING GP-ENGINE
SUPPORT GP-ENGINE
6N-5885 SUPPORT GP-ENGINE
6N-5885 SUPPORT GP-ENGINE -FRONT
S/N 99C7569-UP
TRUNNION GP-ENGINE
179-7086 TRUNNION GP-ENGINE
179-7086 TRUNNION GP-ENGINE
S/N 99C7569-UP
PAN GP-OIL
PAN GP-OIL
7W-6381 PAN GP-OIL
7W-6381 PAN GP-OIL -ENGINE
S/N 99C7569-UP
PISTON & ROD GP
PISTON & ROD GP
192-8808 PISTON & ROD GP
192-8808 PISTON & ROD GP
S/N 99C7569-UP
15.5:1 RATIO
PULLEY GP
DAMPER & PULLEY GP
116-6566 DAMPER & PULLEY GP
116-6566 DAMPER & PULLEY GP
S/N 99C7569-UP
VALVE MECHANISM GP
COVER GP-VALVE MECHANISM
130-7302 COVER GP-VALVE MECHANISM
130-7302 COVER GP-VALVE MECHANISM
S/N 99C7569-UP
ROCKER ARM GP
107-1954 ROCKER ARM GP
107-1954 ROCKER ARM GP
S/N 99C7569-UP
PART OF 108-1551 VALVE MECHANISM GP
VALVE MECHANISM GP
108-1551 VALVE MECHANISM GP
108-1551 VALVE MECHANISM GP
S/N 99C7569-UP
YOKE GP
YOKE GP
128-3339 YOKE GP
128-3339 YOKE GP
S/N 53Y1-UP
PART OF 314-4172 INSTALLATION GP-ENGINE

Information:

(For parts list, see above)

Disassembly and Assembly
Air Compressor - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines
Air Compressor Drive Gear - Remove
3408E and 3412E Engines for Caterpillar Built Machines
Air Compressor Drive Gear - Install
3408E and 3412E Engines for Caterpillar Built Machines
Service Magazine
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
A New Diagnostic Kit for the Evaluation of Air Compressor Operation is Introduced {1803}
2004/11/15
Disassembly and Assembly
Balancer Group - Remove
3408E and 3412E Engines for Caterpillar Built Machines
Balancer Group - Install
3408E and 3412E Engines for Caterpillar Built Machines
Specifications
Belt Tightener
3408 ENGINE FOR CATERPILLAR BUILT MACHINES
Belt Tension Chart
3408E and 3412E Engines for Caterpillar Built Machines
Disassembly and Assembly
Fan Belt Tightener
3408 VEHICULAR ENGINE FOR D8L TRACTOR
Service Magazine
Fan Now Driven By Crankshaft{1356,1357,1358,1359,1360}
1984/05/21
New V-Belt Tightener Available{1530}
1987/10/12
Information that Improves the Service Life of the Remanufactured Air Conditioning Compressor {1357, 1358, 1397, 1802, 1805, 1809, 7320, 7342, 7343}
2008/03/10
Specifications
Camshaft
3408 ENGINE FOR CATERPILLAR BUILT MACHINES
Camshaft Bearings
3408E and 3412E Engines for Caterpillar Built Machines
Camshaft
3408E and 3412E Engines for Caterpillar Built Machines
Camshaft
3408E and 3412E Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Reuse and Salvage for Camshafts {1210, 1210}
Reuse and Salvage for Camshafts {1210, 1210}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
CAT REMAN ANNOUNCES ADDITIONS TO CAMSHAFT PORTFOLIOS (UPDATED COVERAGE CHART)
CAT REMAN ANNOUNCES ADDITIONS TO CAMSHAFT PORTFOLIOS (UPDATED COVERAGE CHART)
Testing and Adjusting
Excessive Bearing Wear - Inspect
3408E and 3412E Engines for Caterpillar Built Machines
Disassembly and Assembly
Camshaft Bearings
3408 VEHICULAR ENGINE FOR D8L TRACTOR
Camshaft
3408 VEHICULAR ENGINE FOR D8L TRACTOR
Camshaft - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines
Camshaft Bearings - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines
Camshaft Bearings - Remove
3408E and 3412E Engines for Caterpillar Built Machines
Camshaft Bearings - Install
3408E and 3412E Engines for Caterpillar Built Machines
Camshaft - Remove
3408E and 3412E Engines for Caterpillar Built Machines
Camshaft - Install
3408E and 3412E Engines for Caterpillar Built Machines
Service Magazine
6V4869 Adapter And 6V6174 Plug Can Be Used To Install Camshaft Bearings{1211,0621}
1982/11/22
New Crankshaft, Cylinder Block And Camshaft Used{1202,1201,1210}
1985/05/13
Maximum Wear Limits Established For Camshaft Roller Followers{1209}
1985/09/30
New 8T2998 Lubricant Available{0645,1210}
1986/02/17
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Remanufactured Camshafts And Cam Kits Available For Parts Service{1210,1211,1212}
1990/12/17
New Valve Lifter Assembly Provides Improved Lubrication Of Lifter Roller And Camshaft Lobes{1209,1210}
1994/06/20
Cat<SUP>&reg;</SUP> Reman Has Added Valve Actuators, Valve Lifters, Rocker Arms, and Camshafts for Certain Machine Engines {1121, 1130, 1209, 1210}
2014/09/05
Quick Disconnect Coupling On Optional Modification Of 5P4150 Nozzle Tester Permits Faster Exchange Of Adapters{0651,1254}
1979/09/03
Truck Engine News
New Front Crankshaft Seals and New Rear Crankshaft Seals are Now in Production {1160, 1161}
2003/05/01
Engine News
New Front Crankshaft Seals and New Rear Crankshaft Seals are Now in Production {1160, 1161}
2003/05/01
Special Instruction
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Specifications
Crankshaft Rear Gear
3408 ENGINE FOR CATERPILLAR BUILT MACHINES
Crankshaft
3408 ENGINE FOR CATERPILLAR BUILT MACHINES
Connecting Rod And Main Bearing Journals
3408 ENGINE FOR CATERPILLAR BUILT MACHINES
Connecting Rod and Main Bearing Journals
3408E and 3412E Engines for Caterpillar Built Machines
Crankshaft
3408E and 3412E Engines for Caterpillar Built Machines
Tool Operating Manual
362-4250 Deck Height Measuring Tool{1201}
362-4250 Deck Height Measuring Tool{1201}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Reuse And Salvage Guidelines
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Testing and Adjusting
Excessive Bearing Wear - Inspect
3408E and 3412E Engines for Caterpillar Built Machines
Main Bearings - Inspect
3408E and 3412E Engines for Caterpillar Built Machines
Disassembly and Assembly
Crankshaft Main Bearings
3408 VEHICULAR ENGINE FOR D8L TRACTOR
Crankshaft
3408 VEHICULAR ENGINE FOR D8L TRACTOR
Crankshaft Rear Seal And Wear Sleeve
3408 VEHICULAR ENGINE FOR D8L TRACTOR
Flywheel Housing Crankshaft Rear Gear
3408 VEHICULAR ENGINE FOR D8L TRACTOR
Crankshaft Rear Gear
3408 VEHICULAR ENGINE FOR D8L TRACTOR
Crankshaft Vibration Damper
3408 VEHICULAR ENGINE FOR D8L TRACTOR
Crankshaft Front Seal And Wear Sleeve
3408 VEHICULAR ENGINE FOR D8L TRACTOR
Bearing Clearance - Check
3408E and 3412E Engines for Caterpillar Built Machines
Crankshaft Rear Seal - Remove
3408E and 3412E Engines for Caterpillar Built Machines
Crankshaft Rear Seal - Install
3408E and 3412E Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Remove
3408E and 3412E Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Install
3408E and 3412E Engines for Caterpillar Built Machines
Crankshaft - Remove
3408E and 3412E Engines for Caterpillar Built Machines
Crankshaft - Install
3408E and 3412E Engines for Caterpillar Built Machines
Crankshaft Front Seal - Remove
3408E and 3412E Engines for Caterpillar Built Machines
Crankshaft Front Seal - Install
3408E and 3412E Engines for Caterpillar Built Machines
Service Magazine
6V2086 And 6V2087 Seal And Wear Sleeve Installers Available{0622,1160,1161}
1980/09/01
Crankshaft Failures; New Thrust Plate{1203,1202,1230}
1981/05/04
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Use 6V6035 Hardness Tester On Crankshafts{0651,1202}
1982/02/22
Use Correct Part Numbers For Main And Connecting Rod Bearings{1230,1203,1219}
1982/04/12
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
New Crankshaft Main Bearings Used{1203}
1982/05/10
6V6142 And 6V6143 Installers Can Be Used To Install Crankshaft Seals And Wear Sleeves{0622,0626,1160,1161}
1982/11/01
Oil Passage Plugs Are No Longer Installed In Crankshafts For Parts Service{1202}
1983/04/04
New Connecting Rod Bearings Used{1219,1230}
1983/04/04
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
New Connecting Rod And Main Bearings Used{1203,1219,1226,1227,1230}
1983/10/10
Crankshaft Failures{1202,1230}
1983/11/21
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Remanufactured Undersize Crankshafts Are Available{1202}
1983/11/21
Fan Now Driven By Crankshaft{1356,1357,1358,1359,1360}
1984/05/21
New Vibration Damper Assembly Has Better Heat Resistance {1205}
1984/06/25
Install Crankshaft Thrust Bearings Correctly To Avoid Damage{1202,1203}
1985/02/11
New Crankshaft Seal Groups Used On More 3400 Series Engines{1160,1161}
1985/03/11
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
New Crankshaft, Cylinder Block And Camshaft Used{1202,1201,1210}
1985/05/13
Remanufactured Crankshafts Are Available In Standard And Two Undersize Dimensions (U.S. and Canada){1202,7754}
1985/11/18
Crankshaft Seal Usage On 3400 Series Engines{1160,1161}
1985/12/16
Service Reminders For 3400 Family Of Diesel Engines{1204,1214,1331}
1986/05/05
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Improved Main And Connecting Rod Bearings Have Aluminum Alloy With More Strength{1230}
1977/01/17
Tools To Remove Wear Sleeves From Crankshafts{0621,7558}
1977/04/18
Tools To Install Crankshaft Seal And Wear Sleeve{1160,1161,0622}
1977/07/11
Some Wobble Is Acceptable In Rubber Vibration Dampers For Crankshafts{1205}
1977/10/31
Crankshaft Support Groups Are Available To Measure Bent Crankshafts{0653,1202}
1977/11/07
Main And Connecting Rod Bearing Part Numbers {1203,1219,1230}
1987/01/26
Mid-Life Bearing Maintenance Recommendations {1203}
1987/09/14
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
New Bronze Thrust Plate Used On Center Main Bearing Of Crankshaft Groups{1203}
1990/12/17
Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts{1202}
1991/01/07
Oil Holes In Crankshaft Main And Rod Journals{1202}
1992/11/09
Wear Sleeve Removal Tooling May &quot;Mark&quot; The Crankshaft{1202,1161}
1995/08/14
Recommendations For Inspection And Replacement Of Rubber and Viscous Crankshaft Dampers{1205}
1995/08/21
Use the 171-7212 Wear Sleeve to Repair the Crankshaft Hub {1160}
2011/09/20
New Front Crankshaft Seals and New Rear Crankshaft Seals are Now in Production {1160, 1161}
2006/06/26
A New Integral Seal Provides Improved Sealing {7555}
2003/10/13
A New Type of Main Bearing is Available {1202, 1203}
2010/12/23
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16
Use Reuse and Salvage Guidelines for Measurements of Crankshafts {1202}
2006/10/09
Truck Engine News
The Cylinder Liners Have a New Appearance {1216}
2005/03/01
Special Instruction
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Installation Of 7N9013 Gasket Service Group{1101, 1221}
Installation Of 7N9013 Gasket Service Group{1101, 1221}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Installation Of 2W3815 Or 5N93 Inserts{1217}
Installation Of 2W3815 Or 5N93 Inserts{1217}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Installation Instructions For The 160-9874 Gasket Kit {1213, 7555}
Installation Instructions For The 160-9874 Gasket Kit {1213, 7555}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Visual Inspection of Liner Seats for 3400, C15, C16, and C18 Series Engines{1200}
Visual Inspection of Liner Seats for 3400, C15, C16, and C18 Series Engines{1200}
Service Letter-NACD
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Australia
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-CFEL
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-CSARL
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Americas
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Brazil
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Truck/Ag/Marine
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Technical Information Bulletin
0R-3711, 0R-3714, 0R-3751, 0R-3752 Remanufactured Long Blocks
0R-3711, 0R-3714, 0R-3751, 0R-3752 Remanufactured Long Blocks
Specifications
Cylinder Block
3408 ENGINE FOR CATERPILLAR BUILT MACHINES
Cylinder Liners
3408 ENGINE FOR CATERPILLAR BUILT MACHINES
Connecting Rod And Main Bearing Journals
3408 ENGINE FOR CATERPILLAR BUILT MACHINES
Cylinder Block
3408E and 3412E Engines for Caterpillar Built Machines
Cylinder Liner
3408E and 3412E Engines for Caterpillar Built Machines
Tool Operating Manual
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
362-4250 Deck Height Measuring Tool{1201}
362-4250 Deck Height Measuring Tool{1201}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Service Letter-China
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Asia
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3114, 3116, and 3126 Engine Series Cylinder Blocks {1201}
Reuse and Salvage for 3114, 3116, and 3126 Engine Series Cylinder Blocks {1201}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Service Letter-APD
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Testing and Adjusting
Cylinder Block - Inspect
3408E and 3412E Engines for Caterpillar Built Machines
Excessive Bearing Wear - Inspect
3408E and 3412E Engines for Caterpillar Built Machines
Main Bearings - Inspect
3408E and 3412E Engines for Caterpillar Built Machines
Cylinder Liner Projection - Inspect
3408E and 3412E Engines for Caterpillar Built Machines
Disassembly and Assembly
Spacer Plates
3408 VEHICULAR ENGINE FOR D8L TRACTOR
Piston Cooling Tubes
3408 VEHICULAR ENGINE FOR D8L TRACTOR
Cylinder Liners
3408 VEHICULAR ENGINE FOR D8L TRACTOR
Crankshaft Main Bearings
3408 VEHICULAR ENGINE FOR D8L TRACTOR
Camshaft Bearings
3408 VEHICULAR ENGINE FOR D8L TRACTOR
Bearing Clearance - Check
3408E and 3412E Engines for Caterpillar Built Machines
Cylinder Liner - Remove
3408E and 3412E Engines for Caterpillar Built Machines
Piston Cooling Jets - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines
Camshaft Bearings - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Remove
3408E and 3412E Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Install
3408E and 3412E Engines for Caterpillar Built Machines
Cylinder Liner - Install
3408E and 3412E Engines for Caterpillar Built Machines
Camshaft Bearings - Remove
3408E and 3412E Engines for Caterpillar Built Machines
Camshaft Bearings - Install
3408E and 3412E Engines for Caterpillar Built Machines
Service Magazine
Crankshaft Failures; New Thrust Plate{1203,1202,1230}
1981/05/04
Remove Piston Cooling Tubes Before Removal Of Pistons And Connecting Rods{1214,1218,1201,1225,1307}
1981/07/13
New Cylinder Liners And O-Ring Seals Give Longer Seal Life{1216,1201,1213,1227}
1981/12/14
Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21
Use Correct Part Numbers For Main And Connecting Rod Bearings{1230,1203,1219}
1982/04/12
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
New Crankshaft Main Bearings Used{1203}
1982/05/10
Liquid Sealant Used Between Flywheel Housing And Cylinder Block{1157,0375}
1982/08/23
New Head Gasket Improves Seal Between Block And Liner Flange{1101,1201}
1982/09/27
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
6V4869 Adapter And 6V6174 Plug Can Be Used To Install Camshaft Bearings{1211,0621}
1982/11/22
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Dimensions For Reconditioning Cylinder Blocks, Cylinder Heads{1201,1101,1103,1105}
1982/12/20
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
New Liner Seat Insert Available{1217}
1983/08/15
New Connecting Rod And Main Bearings Used{1203,1219,1226,1227,1230}
1983/10/10
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Dimensions For Reconditioning Cylinder Blocks, Cylinder Heads{1201,1101,1103,1105}
1984/04/23
Salvaging Cylinder Block Top Decks After Liner Seat Erosion{1201,1216,1217}
1984/06/04
New Cylinder Block Groups Used{1201}
1984/10/01
Install Crankshaft Thrust Bearings Correctly To Avoid Damage{1202,1203}
1985/02/11
New Crankshaft, Cylinder Block And Camshaft Used{1202,1201,1210}
1985/05/13
Use Care When Handling Water Seals For Cylinder Head Spacer Plates{1115}
1985/07/15
New Cylinder Liner Available{1201}
1986/02/10
Service Reminders For 3400 Family Of Diesel Engines{1204,1214,1331}
1986/05/05
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Indications Of Engine Overspeeding When Only One Cam Lobe/Lifter Has Failed{1000,1100,1200}
1986/09/08
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Modification To Holder To Machine Counterbore On Cylinder Block{0664,1201}
1977/02/28
Main And Connecting Rod Bearing Part Numbers {1203,1219,1230}
1987/01/26
Stronger Timing Gear Housing; Additional Stud Used At Top Of Housing{1151,1201}
1987/02/23
Self-Locking Bolts Used To Fasten Cover To Rear Of Cylinder Block{1201,3108}
1987/03/23
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Recommendations For Preventing Cooling System Damage {1201}
1987/08/31
Mid-Life Bearing Maintenance Recommendations {1203}
1987/09/14
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09
A Gasket Group Is Available To Give Improved Sealing For The Oil Supply To The Rocker Arms On Early Engines{1101,1102,1221}
1978/04/03
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
New Information On Reusable Cylinder Liners{1216}
1978/06/19
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
Head Bolt Holes In Cylinder Blocks Can Be Repaired{1201,1101}
1988/10/24
New Liner Seat Insert Available{1201,1216,1217}
1988/11/14
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Improved Head Gasket Used; Service Tips {1124,1216,1221,7568}
1990/02/26
Service Tips For Piston Cooling Jets (Tubes){1331}
1990/11/26
Remanufactured Camshafts And Cam Kits Available For Parts Service{1210,1211,1212}
1990/12/17
New Bronze Thrust Plate Used On Center Main Bearing Of Crankshaft Groups{1203}
1990/12/17
Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts{1202}
1991/01/07
No Gaskets Used With Aluminum Flywheel Housings{1157}
1991/10/14
Thinner Spacer Plates Available For Parts Service{1221}
1992/06/29
New Liner Seat Inserts Available{1217}
1992/11/09
Cylinder Pack Puller Groups Improved {0705,1239}
1993/01/18
New Cylinder Head Gasket, Spacer Plate And Head Bolts Used; New Cylinder Liner Projection Measurement Method; New Cylinder Head Torque Sequence; Improved Coolant Flow (Cylinder Heads) {1124,1221,1216,1101}
1994/07/04
Be Sure Correct Piston Cooling Jets Are Installed{1331}
1994/11/28
New Material Used In O-Rings And Optional New Block Side Cover Replacement{1201}
1996/02/19
Procedure For Installing Steel Core Gasket At The Front Housing And The Flywheel Housing {1151,1157,1162}
1996/11/25
New 171-4660 Engine Stand Adapter Assembly Is Now Available {0701, 1000}
2000/04/17
Damaged Lifter Bores In 3400 Series Engines Can Be Used Again {1201}
2005/01/24
The Cylinder Liners Have a New Appearance {1216}
2005/03/14
Engine News
A New Water Seal Assembly Is Now Used on All 3408, 3412, C27 and C32 Commercial Engines {1100, 7555}
2013/05/13
Special Instruction
Installation of 0R1160, 0R1161 and 0R1248 Remanufactured Cylinder Head Groups{1100}
Installation of 0R1160, 0R1161 and 0R1248 Remanufactured Cylinder Head Groups{1100}
3400 Cylinder Head To Block Joint Repair Procedure{1124}
3400 Cylinder Head To Block Joint Repair Procedure{1124}
Use Of The 5P7333 Tool Group For Bridge Dowel Repair{1101}
Use Of The 5P7333 Tool Group For Bridge Dowel Repair{1101}
Installation Of 7N9013 Gasket Service Group{1101, 1221}
Installation Of 7N9013 Gasket Service Group{1101, 1221}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Installation Of 2W3815 Or 5N93 Inserts{1217}
Installation Of 2W3815 Or 5N93 Inserts{1217}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Technical Information Bulletin
Failures of the 4W-5733 Valve Adapter and the 4W-5719 Adapter As on Certain 3408 and 3412 Engines{1100}
Failures of the 4W-5733 Valve Adapter and the 4W-5719 Adapter As on Certain 3408 and 3412 Engines{1100}
Specifications
Valves, Valve Springs And Valve Seat Inserts
3408 ENGINE FOR CATERPILLAR BUILT MACHINES
Cylinder Heads
3408 ENGINE FOR CATERPILLAR BUILT MACHINES
Cylinder Head Valves
3408E and 3412E Engines for Caterpillar Built Machines
Cylinder Head Valves
3408E and 3412E Engines for Caterpillar Built Machines
Cylinder Head
3408E and 3412E Engines for Caterpillar Built Machines
Tool Operating Manual
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
Reuse And Salvage Guidelines
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Applied Failure Analysis
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
CAT REMAN ANNOUNCES ADDITIONAL CYLINDER HEAD RELEASES FOR MINING AND OTHER APPLICATIONS
CAT REMAN ANNOUNCES ADDITIONAL CYLINDER HEAD RELEASES FOR MINING AND OTHER APPLICATIONS
Testing and Adjusting
Engine Valve Lash - Inspect/Adjust
3408E and 3412E Engines for Caterpillar Built Machines
Cylinder Head - Inspect
3408E and 3412E Engines for Caterpillar Built Machines
Disassembly and Assembly
Fuel Injection Nozzles
3408 VEHICULAR ENGINE FOR D8L TRACTOR
Valve Covers
3408 VEHICULAR ENGINE FOR D8L TRACTOR
Valve Cover Base
3408 VEHICULAR ENGINE FOR D8L TRACTOR
Cylinder Heads
3408 VEHICULAR ENGINE FOR D8L TRACTOR
Bridge Dowels
3408 VEHICULAR ENGINE FOR D8L TRACTOR
Valves
3408 VEHICULAR ENGINE FOR D8L TRACTOR
Valve Seat Inserts
3408 VEHICULAR ENGINE FOR D8L TRACTOR
Valve Guides
3408 VEHICULAR ENGINE FOR D8L TRACTOR
Unit Injector Sleeve - Remove
3408E and 3412E Engines for Caterpillar Built Machines
Unit Injector Sleeve - Install
3408E and 3412E Engines for Caterpillar Built Machines
Inlet and Exhaust Valves - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines
Inlet and Exhaust Valve Seat Inserts - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines
Inlet and Exhaust Valve Guides - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines
Rocker Arm and Shaft - Remove
3408E and 3412E Engines for Caterpillar Built Machines
Rocker Arm and Shaft - Install
3408E and 3412E Engines for Caterpillar Built Machines
HEUI Fluid Manifold - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines
Cylinder Head - Remove
3408E and 3412E Engines for Caterpillar Built Machines
Cylinder Head - Install
3408E and 3412E Engines for Caterpillar Built Machines
Camshaft Bearings - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines
Camshaft Bearings - Remove
3408E and 3412E Engines for Caterpillar Built Machines
Camshaft Bearings - Install
3408E and 3412E Engines for Caterpillar Built Machines
Cylinder Head - Remove
3408E and 3412E Engines for Caterpillar Built Machines
Cylinder Head - Install
3408E and 3412E Engines for Caterpillar Built Machines
Service Magazine
New Fuel Nozzle Adapter Assembly Used{1106}
1982/02/15
Reconditioning of Bridge Wear Seat Is Permitted; Will Prevent Bridge Replacement When Not Necessary{1100}
1982/03/08
Vacuum Tester Checks For Leaks Between Valve Face and Seat{0651,1103,1105}
1982/09/06
New Head Gasket Improves Seal Between Block And Liner Flange{1101,1201}
1982/09/27
Fuel In The Cooling System Or Coolant In The Engine Oil Can Result From Cracked Fuel Nozzle Adapter{1106}
1982/10/18
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Dimensions For Reconditioning Cylinder Blocks, Cylinder Heads{1201,1101,1103,1105}
1982/12/20
Engine Valve Stem &quot;Use Again&quot; Specifications{0653,1105}
1983/02/28
New Fuel Nozzle Adapters Used{1106}
1983/05/09
New Liner Seat Insert Available{1217}
1983/08/15
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
New Adapter Assemblies And Clamps Used To Hold Fuel Nozzles In Position{1106,1252}
1984/02/27
Dimensions For Reconditioning Cylinder Blocks, Cylinder Heads{1201,1101,1103,1105}
1984/04/23
Surface Grinding Of Compacted Graphite Iron Cylinder Heads{1101}
1984/07/02
New Inlet Valve Used{1105}
1984/09/03
New High Alloy Material Is Used In Cylinder Head Assemblies{1101}
1984/10/15
Remanufactured Cylinder Head Groups{1100,1101,7554}
1984/11/19
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
New Cylinder Heads And Fuel Nozzle Adapters Used{1101,1106}
1985/07/01
Use Care When Handling Water Seals For Cylinder Head Spacer Plates{1115}
1985/07/15
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07
Indications Of Engine Overspeeding When Only One Cam Lobe/Lifter Has Failed{1000,1100,1200}
1986/09/08
Improved Exhaust Valve Now Available{1105}
1977/02/28
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Tools Now Available To Ream And/Or Hone 0.500&quot; (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Salvage Of Cylinder Heads By Using Oversized Valve Guides And Valve Inserts {1104,1103}
1987/03/30
Silicone Rubber Water Seals Available{1100}
1987/07/06
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
A Gasket Group Is Available To Give Improved Sealing For The Oil Supply To The Rocker Arms On Early Engines{1101,1102,1221}
1978/04/03
Head Bolt Holes In Cylinder Blocks Can Be Repaired{1201,1101}
1988/10/24
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Improved Head Gasket Used; Service Tips {1124,1216,1221,7568}
1990/02/26
Reconditioning Of Bridge Wear Seat Is Permitted; Will Prevent Bridge Replacement When Not Necessary{1121}
1990/04/30
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
Cylinder Head Gaskets Improved To Provide Better Fire Ring Retention{1124}
1994/02/07
Identification Of Intake And Exhaust Valves That May Be Used In Remanufactured Direct Injected 3400 Cylinder Heads{1105}
1994/04/04
New Intake And Exhaust Valves Used{1105,1100}
1994/06/20
New Rocker Arm Adjustment Screw Used To Adjust Valve Clearance{1123,1100}
1994/06/20
New Cylinder Head Gasket, Spacer Plate And Head Bolts Used; New Cylinder Liner Projection Measurement Method; New Cylinder Head Torque Sequence; Improved Coolant Flow (Cylinder Heads) {1124,1221,1216,1101}
1994/07/04
Remanufactured 3400 Cylinder Heads Now Use Intake And Exhaust Valves With Chrome Plated Valve Stems{1105}
1994/09/05
New Water Seals Used In Cylinder Head Assemblies{1124}
1994/09/05
New Inlet And Exhaust Valves Have Thinner Heads{1105}
1995/02/20
New And Reconditioned Valve Projection Specifications{1105}
1995/08/28
Be Sure To Use The Correct Inlet And Exhaust Valves In Engines Equipped With Valve Bridges That Do Not Ride On Dowels {1105,1121}
1998/02/16
Caterpillar Warranty Claims on Cylinder Head Valves {1105}
2005/10/03
Use the Correct Remanufactured Cylinder Heads and Valves {1101, 1105}
2006/03/13
Clearly Mark all of the Cracks on the Cylinder Head {1101, 7754}
2006/04/10
Improved Cylinder Head Assemblies Are Available through Cat Reman for Certain Machine Engines {1100}
2012/05/08
A New Water Seal Assembly Is Now Used on All 3408 and 3412 Engines {1100, 7555}
2013/05/10
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR TIGHTENING THE DAMPER ADAPTOR BOLTS ON CERTAIN 3408, 3408C, 3408E, 3412, 3412C, 3412D, 3412E, C27, C32 ENGINES 773E OFF HIGHWAY TRUCKS, AND D10T, D9R TRACK TYPE TRACTORS
PRODUCT IMPROVEMENT PROGRAM FOR TIGHTENING THE DAMPER ADAPTOR BOLTS ON CERTAIN 3408, 3408C, 3408E, 3412, 3412C, 3412D, 3412E, C27, C32 ENGINES 773E OFF HIGHWAY TRUCKS, AND D10T, D9R TRACK TYPE TRACTORS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Specifications
Vibration Damper
3408E and 3412E Engines for Caterpillar Built Machines
Vibration Damper
3408E and 3412E Engines for Caterpillar Built Machines
Service Letter-China
PRODUCT IMPROVEMENT PROGRAM FOR TIGHTENING THE DAMPER ADAPTOR BOLTS ON CERTAIN 3408, 3408C, 3408E, 3412, 3412C, 3412D, 3412E, C27, C32 ENGINES 773E OFF HIGHWAY TRUCKS, AND D10T, D9R TRACK TYPE TRACTORS
PRODUCT IMPROVEMENT PROGRAM FOR TIGHTENING THE DAMPER ADAPTOR BOLTS ON CERTAIN 3408, 3408C, 3408E, 3412, 3412C, 3412D, 3412E, C27, C32 ENGINES 773E OFF HIGHWAY TRUCKS, AND D10T, D9R TRACK TYPE TRACTORS
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Service Letter-APD
PRODUCT IMPROVEMENT PROGRAM FOR TIGHTENING THE DAMPER ADAPTOR BOLTS ON CERTAIN 3408, 3408C, 3408E, 3412, 3412C, 3412D, 3412E, C27, C32 ENGINES 773E OFF HIGHWAY TRUCKS, AND D10T, D9R TRACK TYPE TRACTORS
PRODUCT IMPROVEMENT PROGRAM FOR TIGHTENING THE DAMPER ADAPTOR BOLTS ON CERTAIN 3408, 3408C, 3408E, 3412, 3412C, 3412D, 3412E, C27, C32 ENGINES 773E OFF HIGHWAY TRUCKS, AND D10T, D9R TRACK TYPE TRACTORS
Testing and Adjusting
Vibration Damper - Check
3408E and 3412E Engines for Caterpillar Built Machines
Disassembly and Assembly
Crankshaft Vibration Damper
3408 VEHICULAR ENGINE FOR D8L TRACTOR
Vibration Damper and Pulley - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines
Vibration Damper and Pulley - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines
Service Magazine
New Vibration Damper Assembly Has Better Heat Resistance {1205}
1984/06/25
Some Wobble Is Acceptable In Rubber Vibration Dampers For Crankshafts{1205}
1977/10/31
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut {0601}
1988/01/25
Recommendations For Inspection And Replacement Of Rubber and Viscous Crankshaft Dampers{1205}
1995/08/21
Procedure for Installing the Front Gears and Dampers on Certain Caterpillar Engines {1151, 1162, 1205, 1206}
2008/02/18
New Seal Used In Yoke Group{1165,1207}
1983/04/04
New Outer Bearing Race Used In Auxiliary Fan Drive Group{1390}
1984/10/29
New, Tougher Gasket Used Between Block And Front Housing{1151,7555}
1985/12/09
Stronger Timing Gear Housing; Additional Stud Used At Top Of Housing{1151,1201}
1987/02/23
Procedure for Installing the Front Gears and Dampers on Certain Caterpillar Engines {1151, 1162, 1205, 1206}
2008/02/18
New Seal Used In Yoke Group{1165,1207}
1983/04/04
New Outer Bearing Race Used In Auxiliary Fan Drive Group{1390}
1984/10/29
Specifications
Fan Drive
3408 ENGINE FOR CATERPILLAR BUILT MACHINES
Disassembly and Assembly
Fan Drive (Driven)
3408 VEHICULAR ENGINE FOR D8L TRACTOR
Fan Drive
3408 VEHICULAR ENGINE FOR D8L TRACTOR
Service Magazine
Fan Now Driven By Crankshaft{1356,1357,1358,1359,1360}
1984/05/21
New Outer Bearing Race Used In Auxiliary Fan Drive Group{1390}
1984/10/29
Special Instruction
Installation of Water Pump Seal Group{1361}
Installation of Water Pump Seal Group{1361}
Service Letter-NACD
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Service Letter-China
Service Letter-Asia
Service Letter-APD
Service Magazine
Use Vacuum Tester For Quality Control Check Of Water Pump Seal{0652,1361}
1983/02/28
New, Corrosion Resistant Water Pump Shaft Available{1389,1361}
1985/08/05
New Retainer And Improved Housing Keep Water Pump Bearing Tight; Repair For Loosened Bearing{1361}
1977/04/11
New Water Pump Cover Has A Baffle And Wall To Send Coolant Flow From Bypass Line Directly Into Water Pump{1361}
1978/01/30
Replacement Seal Group For Water Pump Impeller Now Has All The Seal Parts Plus An Installation Tool{1361,0622}
1978/02/13
New Seal Group Used In Water Pump Groups{1361}
1993/04/12
Special Instruction
Installation of Water Pump Seal Group{1361}
Installation of Water Pump Seal Group{1361}
Service Letter-NACD
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Service Letter-China
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Water Pump
3408 VEHICULAR ENGINE FOR D8L TRACTOR
Service Magazine
Use Vacuum Tester For Quality Control Check Of Water Pump Seal{0652,1361}
1983/02/28
New, Corrosion Resistant Water Pump Shaft Available{1389,1361}
1985/08/05
New Retainer And Improved Housing Keep Water Pump Bearing Tight; Repair For Loosened Bearing{1361}
1977/04/11
New Water Pump Cover Has A Baffle And Wall To Send Coolant Flow From Bypass Line Directly Into Water Pump{1361}
1978/01/30
Replacement Seal Group For Water Pump Impeller Now Has All The Seal Parts Plus An Installation Tool{1361,0622}
1978/02/13
Two New Coolant Flow Switches Used On Machines Equipped With Electronic Monitoring System (EMS){1361,7422,7470}
1990/09/24
New Seal Group Used In Water Pump Groups{1361}
1993/04/12
Jacket Water Pumps Now Include New Tapered Roller Bearings {1361}
1995/03/06
Special Instruction
Troubleshooting Engine Vibration In Vehicular Equipment{1000}
Troubleshooting Engine Vibration In Vehicular Equipment{1000}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Oil and Your Engine {1000}
Oil and Your Engine {1000}
Service Magazine
Real Value Available Through Caterpillar Remanufacturing Programs{0374}
1980/02/04
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Separate Valve Stem Gauges Available{0653,1000}
1982/06/07
Analyzing A Major Engine Failure{1000}
1982/07/19
Added Methods To Decrease The Effects Of High Sulfur Fuels{1355,1280,1318,1000}
1982/08/30
Reference Chart for Engine Improvements{0374,1000}
1982/10/25
New Index Lists Engine Special Instructions By SMCS Code{1000,0374}
1986/04/07
Indications Of Engine Overspeeding When Only One Cam Lobe/Lifter Has Failed{1000,1100,1200}
1986/09/08
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Testing The Starter On The Engine{1401,1450}
1987/05/04
The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Microfiche For Replacement Engine Bills Of Material {0374,1000}
1987/10/26
Explanation Of Nomenclature Used In Engine Performance{1000,0374}
1978/05/15
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
New Engine Oil Coolers Have Rubber End Sheets {1378}
1988/01/25
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
Check The Radiator Fan Spider Assembly When Doing Yearly General Maintenance{1356}
1989/07/24
Engine Coolant Can Be Recycled{1395}
1989/11/13
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Reuse And Salvage Guidelines
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Special Instruction
Installation Of Service Flywheel Groups For 3406, 3408 And 3412 Engines{1156}
Installation Of Service Flywheel Groups For 3406, 3408 And 3412 Engines{1156}
Service Letter-NACD
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Specifications
Crankshaft Rear Gear
3408 ENGINE FOR CATERPILLAR BUILT MACHINES
Flywheel Housing
3408 ENGINE FOR CATERPILLAR BUILT MACHINES
Flywheel
3408 ENGINE FOR CATERPILLAR BUILT MACHINES
Flywheel
3408E and 3412E Engines for Caterpillar Built Machines
Flywheel Housing
3408E and 3412E Engines for Caterpillar Built Machines
Service Letter-China
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse and Salvage for Flywheel Assemblies {1156}
Reuse and Salvage for Flywheel Assemblies {1156}
Service Letter-APD
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Testing and Adjusting
Flywheel - Inspect
3408E and 3412E Engines for Caterpillar Built Machines
Disassembly and Assembly
Flywheel
3408 VEHICULAR ENGINE FOR D8L TRACTOR
Flywheel Housing
3408 VEHICULAR ENGINE FOR D8L TRACTOR
Flywheel Housing Crankshaft Rear Gear
3408 VEHICULAR ENGINE FOR D8L TRACTOR
Crankshaft Rear Gear
3408 VEHICULAR ENGINE FOR D8L TRACTOR
Flywheel - Remove
3408E and 3412E Engines for Caterpillar Built Machines
Flywheel - Install
3408E and 3412E Engines for Caterpillar Built Machines
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Liquid Sealant Used Between Flywheel Housing And Cylinder Block{1157,0375}
1982/08/23
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Service Reminders For 3400 Family Of Diesel Engines{1204,1214,1331}
1986/05/05
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
No Gaskets Used With Aluminum Flywheel Housings{1157}
1991/10/14
New Plug And O-Ring Can Help Prevent Oil Leakage At The Flywheel Housing Gasket{1157,1307}
1992/09/21
Procedure For Installing Steel Core Gasket At The Front Housing And The Flywheel Housing {1151,1157,1162}
1996/11/25
New Flywheel Housing Gasket For 3408 And 3412 Machine Engines {1152}
1999/08/02
New Flywheel Housing Gasket For 3408 And 3412 Machine Engines {1152}
1999/10/25
A New Flywheel Assembly is Available for Off-Highway Trucks {1156}
2001/04/09
A New Flywheel Improves Service Life {1156, 1158}
2002/12/09
Engine News
An Improved Front Gear Train Timing Procedure Is Used for 3406E, 3456, C-15, C-16, C15, and C18 Engines {1206}
2012/12/14
Specifications
Front Timing Gears
3408 ENGINE FOR CATERPILLAR BUILT MACHINES
Crankshaft Rear Gear
3408 ENGINE FOR CATERPILLAR BUILT MACHINES
Timing Gear Housing
3408 ENGINE FOR CATERPILLAR BUILT MACHINES
Gear Group (Front)
3408E and 3412E Engines for Caterpillar Built Machines
Gear Group (Rear)
3408E and 3412E Engines for Caterpillar Built Machines
Gear Group (Rear)
3408E and 3412E Engines for Caterpillar Built Machines
Gear Group (Rear)
3408E and 3412E Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Testing and Adjusting
Gear Group (Front) - Time
3408E and 3412E Engines for Caterpillar Built Machines
Gear Group - Inspect
3408E and 3412E Engines for Caterpillar Built Machines
Disassembly and Assembly
Timing Gear Cover
3408 VEHICULAR ENGINE FOR D8L TRACTOR
Timing Gears
3408 VEHICULAR ENGINE FOR D8L TRACTOR
Flywheel Housing Crankshaft Rear Gear
3408 VEHICULAR ENGINE FOR D8L TRACTOR
Crankshaft Rear Gear
3408 VEHICULAR ENGINE FOR D8L TRACTOR
Gear Group (Front) - Remove
3408E and 3412E Engines for Caterpillar Built Machines
Gear Group (Front) - Install
3408E and 3412E Engines for Caterpillar Built Machines
Gear Group (Rear) - Remove
3408E and 3412E Engines for Caterpillar Built Machines
Gear Group (Rear) - Install
3408E and 3412E Engines for Caterpillar Built Machines
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
New, Tougher Gasket Used Between Block And Front Housing{1151,7555}
1985/12/09
Service Reminders For 3400 Family Of Diesel Engines{1204,1214,1331}
1986/05/05
Stronger Timing Gear Housing; Additional Stud Used At Top Of Housing{1151,1201}
1987/02/23
New Timing Gear Housing Used In Front Housing Groups To Help Prevent Oil Leaks{1162,1166}
1987/09/21
New Bolts With &quot;Lock-Patch&quot; Used In Front Timing Gear Groups {1206}
1995/07/03
Procedure For Installing Steel Core Gasket At The Front Housing And The Flywheel Housing {1151,1157,1162}
1996/11/25
Procedure for Installing the Front Gears and Dampers on Certain Caterpillar Engines {1151, 1162, 1205, 1206}
2008/02/18
An Improved Front Gear Train Timing Procedure Is Used for 3406E, 3456, C-15, C-16, C15, and C18 Engines {1206}
2012/12/13
Special Instruction
Installation Of Service Flywheel Groups For 3406, 3408 And 3412 Engines{1156}
Installation Of Service Flywheel Groups For 3406, 3408 And 3412 Engines{1156}
Service Letter-NACD
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Specifications
Rear Cover Group
3408 ENGINE FOR CATERPILLAR BUILT MACHINES
Flywheel Housing
3408 ENGINE FOR CATERPILLAR BUILT MACHINES
Magnetic Pickup
3408 ENGINE FOR CATERPILLAR BUILT MACHINES
Flywheel Housing
3408E and 3412E Engines for Caterpillar Built Machines
Service Letter-China
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Asia
Service Letter-APD
Testing and Adjusting
Flywheel Housing - Inspect
3408E and 3412E Engines for Caterpillar Built Machines
Disassembly and Assembly
Crankshaft Rear Seal And Wear Sleeve
3408 VEHICULAR ENGINE FOR D8L TRACTOR
Flywheel Housing
3408 VEHICULAR ENGINE FOR D8L TRACTOR
Flywheel Housing Crankshaft Rear Gear
3408 VEHICULAR ENGINE FOR D8L TRACTOR
Flywheel Housing - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines
Service Magazine
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine{0651,0654,1250}
1982/03/22
Liquid Sealant Used Between Flywheel Housing And Cylinder Block{1157,0375}
1982/08/23
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
Use The 6V2034 Micrometer Adapter To Measure Lip Thickness Of Engine Valves {0653,1105}
1979/10/29
No Gaskets Used With Aluminum Flywheel Housings{1157}
1991/10/14
New Plug And O-Ring Can Help Prevent Oil Leakage At The Flywheel Housing Gasket{1157,1307}
1992/09/21
Procedure For Installing Steel Core Gasket At The Front Housing And The Flywheel Housing {1151,1157,1162}
1996/11/25
New Flywheel Housing Gasket For 3408 And 3412 Machine Engines {1152}
1999/08/02
New Flywheel Housing Gasket For 3408 And 3412 Machine Engines {1152}
1999/10/25
A New Integral Seal Provides Improved Sealing {7555}
2003/10/13
Specifications
Front Timing Gears
3408 ENGINE FOR CATERPILLAR BUILT MACHINES
Front Cover Group
3408 ENGINE FOR CATERPILLAR BUILT MACHINES
Timing Gear Housing
3408 ENGINE FOR CATERPILLAR BUILT MACHINES
Housing (Front)
3408E and 3412E Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Disassembly and Assembly
Timing Gear Cover
3408 VEHICULAR ENGINE FOR D8L TRACTOR
Timing Gears
3408 VEHICULAR ENGINE FOR D8L TRACTOR
Crankshaft Front Seal And Wear Sleeve
3408 VEHICULAR ENGINE FOR D8L TRACTOR
Front Cover - Remove
3408E and 3412E Engines for Caterpillar Built Machines
Front Cover - Install
3408E and 3412E Engines for Caterpillar Built Machines
Housing (Front) - Remove
3408E and 3412E Engines for Caterpillar Built Machines
Housing (Front) - Install
3408E and 3412E Engines for Caterpillar Built Machines
Service Magazine
Stronger Fuel Pump Gear Cover Provides Stronger Mounting Of Fan Drive{1150,1166}
1985/05/27
New, Tougher Gasket Used Between Block And Front Housing{1151,7555}
1985/12/09
Stronger Timing Gear Housing; Additional Stud Used At Top Of Housing{1151,1201}
1987/02/23
New Timing Gear Housing Used In Front Housing Groups To Help Prevent Oil Leaks{1162,1166}
1987/09/21
New Bolts With &quot;Lock-Patch&quot; Used In Front Timing Gear Groups {1206}
1995/07/03
Procedure For Installing Steel Core Gasket At The Front Housing And The Flywheel Housing {1151,1157,1162}
1996/11/25
Procedure for Installing the Front Gears and Dampers on Certain Caterpillar Engines {1151, 1162, 1205, 1206}
2008/02/18
Special Instruction
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Service Letter-NACD
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Australia
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-CFEL
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-CSARL
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Americas
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Brazil
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Truck/Ag/Marine
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Technical Information Bulletin
0R-3711, 0R-3714, 0R-3751, 0R-3752 Remanufactured Long Blocks
0R-3711, 0R-3714, 0R-3751, 0R-3752 Remanufactured Long Blocks
Tool Operating Manual
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
Service Letter-China
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Asia
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-APD
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Magazine
Real Value Available Through Caterpillar Remanufacturing Programs{0374}
1980/02/04
Connecting Rod Changes And Replacement Information{1218}
1980/03/03
6V2086 And 6V2087 Seal And Wear Sleeve Installers Available{0622,1160,1161}
1980/09/01
Larger Plug Used In The Ends Of The Rocker Arm Shaft Assembly{1102}
1980/12/01
New Cylinder Liners And O-Ring Seals Give Longer Seal Life{1216,1201,1213,1227}
1981/12/14
Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Use 6V6035 Hardness Tester On Crankshafts{0651,1202}
1982/02/22
Reconditioning of Bridge Wear Seat Is Permitted; Will Prevent Bridge Replacement When Not Necessary{1100}
1982/03/08
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine{0651,0654,1250}
1982/03/22
Use Correct Part Numbers For Main And Connecting Rod Bearings{1230,1203,1219}
1982/04/12
New Crankshaft Main Bearings Used{1203}
1982/05/10
Separate Valve Stem Gauges Available{0653,1000}
1982/06/07
Added Methods To Decrease The Effects Of High Sulfur Fuels{1355,1280,1318,1000}
1982/08/30
New Head Gasket Improves Seal Between Block And Liner Flange{1101,1201}
1982/09/27
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Fuel In The Cooling System Or Coolant In The Engine Oil Can Result From Cracked Fuel Nozzle Adapter{1106}
1982/10/18
Reference Chart for Engine Improvements{0374,1000}
1982/10/25
6V6142 And 6V6143 Installers Can Be Used To Install Crankshaft Seals And Wear Sleeves{0622,0626,1160,1161}
1982/11/01
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
6V4869 Adapter And 6V6174 Plug Can Be Used To Install Camshaft Bearings{1211,0621}
1982/11/22
Use the 6V6167 Contact Point to Measure Wear Steps on Piston Pins{0653}
1982/11/22
New Piston Group Has A Thicker Top Ring{1215,1214,1213,1225,1226,1227}
1982/12/13
Dimensions For Reconditioning Cylinder Blocks, Cylinder Heads{1201,1101,1103,1105}
1982/12/20
Engine Valve Stem &quot;Use Again&quot; Specifications{0653,1105}
1983/02/28
Use Vacuum Tester For Quality Control Check Of Water Pump Seal{0652,1361}
1983/02/28
New Seal Used In Yoke Group{1165,1207}
1983/04/04
New Connecting Rod Bearings Used{1219,1230}
1983/04/04
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Parts Service Information For Pistons, Connecting Rods, Piston Pins And Rings{1214,1225,1215,1218}
1983/09/12
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
New Valve Lifter Assemblies Used In Valve Mechanism Groups{1209}
1983/10/31
Crankshaft Failures{1202,1230}
1983/11/21
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Remanufactured Undersize Crankshafts Are Available{1202}
1983/11/21
Dimensions For Reconditioning Cylinder Blocks, Cylinder Heads{1201,1101,1103,1105}
1984/04/23
Salvaging Cylinder Block Top Decks After Liner Seat Erosion{1201,1216,1217}
1984/06/04
New Cylinder Block Groups Used{1201}
1984/10/01
New Outer Bearing Race Used In Auxiliary Fan Drive Group{1390}
1984/10/29
Install Crankshaft Thrust Bearings Correctly To Avoid Damage{1202,1203}
1985/02/11
New Crankshaft Seal Groups Used On More 3400 Series Engines{1160,1161}
1985/03/11
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
Be Sure Correct Piston Rings Are Used On 3400 Series Engines{1215,1214}
1985/05/06
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
Use Care When Handling Water Seals For Cylinder Head Spacer Plates{1115}
1985/07/15
Maximum Wear Limits Established For Camshaft Roller Followers{1209}
1985/09/30
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Two Different Piston Oil Ring Designs Used{1215}
1985/11/11
Remanufactured Crankshafts Are Available In Standard And Two Undersize Dimensions (U.S. and Canada){1202,7754}
1985/11/18
New, Tougher Gasket Used Between Block And Front Housing{1151,7555}
1985/12/09
Crankshaft Seal Usage On 3400 Series Engines{1160,1161}
1985/12/16
New Cylinder Liner Available{1201}
1986/02/10
New 8T2998 Lubricant Available{0645,1210}
1986/02/17
New Index Lists Engine Special Instructions By SMCS Code{1000,0374}
1986/04/07
Service Reminders For 3400 Family Of Diesel Engines{1204,1214,1331}
1986/05/05
Increase Piston Reuse With Keystone Piston Ring Gauge Group{1214,1215}
1986/06/16
Indications Of Engine Overspeeding When Only One Cam Lobe/Lifter Has Failed{1000,1100,1200}
1986/09/08
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Check Connecting Rods After Engine Failures Involving Hydraulic Lock{1218,1225}
1986/10/20
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Modification To Holder To Machine Counterbore On Cylinder Block{0664,1201}
1977/02/28
Improved Exhaust Valve Now Available{1105}
1977/02/28
New Retainer And Improved Housing Keep Water Pump Bearing Tight; Repair For Loosened Bearing{1361}
1977/04/11
Tools To Remove Wear Sleeves From Crankshafts{0621,7558}
1977/04/18
New Piston Pin Bearing Used In Connecting Rod Assembly{1218}
1977/04/25
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Tools Now Available To Ream And/Or Hone 0.500&quot; (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Change Is Made to Support Beam For Front Of Engine{0643}
1977/10/03
Some Wobble Is Acceptable In Rubber Vibration Dampers For Crankshafts{1205}
1977/10/31
Crankshaft Support Groups Are Available To Measure Bent Crankshafts{0653,1202}
1977/11/07
Stronger Timing Gear Housing; Additional Stud Used At Top Of Housing{1151,1201}
1987/02/23
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Recommendations For Preventing Cooling System Damage {1201}
1987/08/31
Mid-Life Bearing Maintenance Recommendations {1203}
1987/09/14
New Timing Gear Housing Used In Front Housing Groups To Help Prevent Oil Leaks{1162,1166}
1987/09/21
Microfiche For Replacement Engine Bills Of Material {0374,1000}
1987/10/26
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
New Water Pump Cover Has A Baffle And Wall To Send Coolant Flow From Bypass Line Directly Into Water Pump{1361}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
A Gasket Group Is Available To Give Improved Sealing For The Oil Supply To The Rocker Arms On Early Engines{1101,1102,1221}
1978/04/03
Use 6V100 Tool Arrangement To Remove And Install Piston Pin Bearings For Both Tapered And Standard Connecting Rods{0620,1218}
1978/04/24
Explanation Of Nomenclature Used In Engine Performance{1000,0374}
1978/05/15
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
Head Bolt Holes In Cylinder Blocks Can Be Repaired{1201,1101}
1988/10/24
New Liner Seat Insert Available{1201,1216,1217}
1988/11/14
New 6V87 Gauge Measures Valve Stem Wear{0653,1105}
1979/01/08
Current Chart For Dynamometer Adapters{0651,1000}
1979/01/22
5P3519 Piston Ring Gauge Has Improved Design For Better Accuracy And Easier Use; Corrected Information For Use On Pistons That Have Two Ring Grooves{0653,1214}
1979/05/14
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Quick Disconnect Coupling On Optional Modification Of 5P4150 Nozzle Tester Permits Faster Exchange Of Adapters{0651,1254}
1979/09/03
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
Wider Connecting Rods Have More Bearing Area{1214,1218}
1979/11/05
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Check The Radiator Fan Spider Assembly When Doing Yearly General Maintenance{1356}
1989/07/24
New Connecting Rod Bearing Used{0372,1203,1219}
1989/08/21
Engine Coolant Can Be Recycled{1395}
1989/11/13
Improved Head Gasket Used; Service Tips {1124,1216,1221,7568}
1990/02/26
Improved Seals Used; Seal Replacement In Folded Core Radiators{1353}
1990/06/04
Two New Coolant Flow Switches Used On Machines Equipped With Electronic Monitoring System (EMS){1361,7422,7470}
1990/09/24
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
Service Tips For Piston Cooling Jets (Tubes){1331}
1990/11/26
Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts{1202}
1991/01/07
No Gaskets Used With Aluminum Flywheel Housings{1157}
1991/10/14
New Piston Pin Retainer Used{1225}
1991/10/14
Thinner Spacer Plates Available For Parts Service{1221}
1992/06/29
Oil Holes In Crankshaft Main And Rod Journals{1202}
1992/11/09
New Liner Seat Inserts Available{1217}
1992/11/09
New Seal Group Used In Water Pump Groups{1361}
1993/04/12
New Intake And Exhaust Valves Used{1105,1100}
1994/06/20
New Rocker Arm Adjustment Screw Used To Adjust Valve Clearance{1123,1100}
1994/06/20
New Valve Lifter Assembly Provides Improved Lubrication Of Lifter Roller And Camshaft Lobes{1209,1210}
1994/06/20
New Inlet And Exhaust Valves Have Thinner Heads{1105}
1995/02/20
Identification Of External Terminals On Alternators {1405,1406,1400}
1998/12/07
Specifications
Trunnion Group
3408 ENGINE FOR CATERPILLAR BUILT MACHINES
Engine Support Group
3408 ENGINE FOR CATERPILLAR BUILT MACHINES
Disassembly and Assembly
Engine Front Support And Trunnion
3408 VEHICULAR ENGINE FOR D8L TRACTOR
Engine Support (Front) - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines
Engine Support (Front) - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines
Service Magazine
Change Is Made to Support Beam For Front Of Engine{0643}
1977/10/03
New Flywheel Housing Gasket For 3408 And 3412 Machine Engines {1152}
1999/08/02
New Flywheel Housing Gasket For 3408 And 3412 Machine Engines {1152}
1999/10/25
Specifications
Oil Pan
3408 ENGINE FOR CATERPILLAR BUILT MACHINES
Engine Oil Pan
3408E and 3412E Engines for Caterpillar Built Machines
Contamination Control Guidelines
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Disassembly and Assembly
Oil Pan
3408 VEHICULAR ENGINE FOR D8L TRACTOR
Engine Oil Pan - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines
Service Magazine
Remove Piston Cooling Tubes Before Removal Of Pistons And Connecting Rods{1214,1218,1201,1225,1307}
1981/07/13
Correct Maintenance Can Help Prevent Oil Pan Cracking{1302,7151}
1984/05/21
New Engine Breather Lines Direct Crankcase Fumes Away From Radiator Core{1317,1353}
1986/09/29
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Be Sure To Use The Correct Front Pan Plate In Engine Oil Lines Group {1326,1302}
1991/08/26
New Plug And O-Ring Can Help Prevent Oil Leakage At The Flywheel Housing Gasket{1157,1307}
1992/09/21
Oil Drain Assembly Improved To Reduce Thread Interference With Drain Plug {1302}
1994/08/29
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Special Instruction
Use of Piston Pin Bearing Removal and Installation Tools{1218}
Use of Piston Pin Bearing Removal and Installation Tools{1218}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Piston Cleaning Procedure{1214}
Piston Cleaning Procedure{1214}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
3400 Series Engines{1215}
3400 Series Engines{1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Service Letter-NACD
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-Australia
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-CFEL
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-CSARL
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-Americas
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-Brazil
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-Truck/Ag/Marine
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Technical Information Bulletin
Connecting Rod Bearings
Connecting Rod Bearings
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Specifications
Connecting Rod
3408 ENGINE FOR CATERPILLAR BUILT MACHINES
Connecting Rod And Main Bearing Journals
3408 ENGINE FOR CATERPILLAR BUILT MACHINES
Pistons And Rings
3408 ENGINE FOR CATERPILLAR BUILT MACHINES
Connecting Rod
3408E and 3412E Engines for Caterpillar Built Machines
Piston and Rings
3408E and 3412E Engines for Caterpillar Built Machines
Tool Operating Manual
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
Service Letter-China
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-Asia
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Reuse And Salvage Guidelines
Reuse and Salvage for Connecting Rods {1218}
Reuse and Salvage for Connecting Rods {1218}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Service Letter-APD
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Testing and Adjusting
Engine Crankcase Pressure (Blowby) - Test
3408E and 3412E Engines for Caterpillar Built Machines
Compression - Test
3408E and 3412E Engines for Caterpillar Built Machines
Excessive Bearing Wear - Inspect
3408E and 3412E Engines for Caterpillar Built Machines
Connecting Rod Bearings - Inspect
3408E and 3412E Engines for Caterpillar Built Machines
Cylinder Liner Projection - Inspect
3408E and 3412E Engines for Caterpillar Built Machines
Piston Ring Groove - Inspect
3408E and 3412E Engines for Caterpillar Built Machines
Disassembly and Assembly
Connecting Rod Bearings
3408 VEHICULAR ENGINE FOR D8L TRACTOR
Pistons
3408 VEHICULAR ENGINE FOR D8L TRACTOR
Bearing Clearance - Check
3408E and 3412E Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Remove
3408E and 3412E Engines for Caterpillar Built Machines
Connecting Rod Bearings - Remove
3408E and 3412E Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Install
3408E and 3412E Engines for Caterpillar Built Machines
Piston Cooling Jets - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Disassemble - One-Piece Piston
3408E and 3412E Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Assemble - One-Piece Piston
3408E and 3412E Engines for Caterpillar Built Machines
Connecting Rod Bearings - Install
3408E and 3412E Engines for Caterpillar Built Machines
Service Magazine
Connecting Rod Changes And Replacement Information{1218}
1980/03/03
6V3197 Spacer, 6V3041 Tool Group Available For Use During Removal and Installation Of Piston Pin Bearings{0622,1219,1218,1214}
1981/03/30
Remove Piston Cooling Tubes Before Removal Of Pistons And Connecting Rods{1214,1218,1201,1225,1307}
1981/07/13
New Cylinder Liners And O-Ring Seals Give Longer Seal Life{1216,1201,1213,1227}
1981/12/14
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
Use Correct Part Numbers For Main And Connecting Rod Bearings{1230,1203,1219}
1982/04/12
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
New Bearing Standard: Quantity Of One Part Number Now Has Both Halves Of The Bearing{7551}
1982/08/09
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
Use the 6V6167 Contact Point to Measure Wear Steps on Piston Pins{0653}
1982/11/22
New Piston Group Has A Thicker Top Ring{1215,1214,1213,1225,1226,1227}
1982/12/13
New Connecting Rod Bearings Used{1219,1230}
1983/04/04
Pistons With Thicker Top Rings Must Be Used In Correct Applications {1214,1215}
1983/04/18
Reuse Of Engine Bearings{1230}
1983/05/16
Parts Service Information For Pistons, Connecting Rods, Piston Pins And Rings{1214,1225,1215,1218}
1983/09/12
New Connecting Rod And Main Bearings Used{1203,1219,1226,1227,1230}
1983/10/10
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
Be Sure Correct Piston Rings Are Used On 3400 Series Engines{1215,1214}
1985/05/06
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Two Different Piston Oil Ring Designs Used{1215}
1985/11/11
Service Reminders For 3400 Family Of Diesel Engines{1204,1214,1331}
1986/05/05
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Increase Piston Reuse With Keystone Piston Ring Gauge Group{1214,1215}
1986/06/16
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Check Connecting Rods After Engine Failures Involving Hydraulic Lock{1218,1225}
1986/10/20
Improved Main And Connecting Rod Bearings Have Aluminum Alloy With More Strength{1230}
1977/01/17
New Piston Pin Bearing Used In Connecting Rod Assembly{1218}
1977/04/25
New Oversize Connecting Rod Bearings Have Improved Design And Material{1219}
1977/04/25
Main And Connecting Rod Bearing Part Numbers {1203,1219,1230}
1987/01/26
Use Only Paint To Mark Connecting Rod Caps For Torque-Turn Method {1218,1219}
1987/06/01
Testing Connecting Rod Eye Bushings When Overhauling Engines{1218}
1987/07/06
Locating Bushings For The 5P3550 Rod Boring Machine Will Now Hold Tapered Piston Pin Bushings {0626}
1978/04/17
Use 6V100 Tool Arrangement To Remove And Install Piston Pin Bearings For Both Tapered And Standard Connecting Rods{0620,1218}
1978/04/24
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
5P3519 Piston Ring Gauge Has Improved Design For Better Accuracy And Easier Use; Corrected Information For Use On Pistons That Have Two Ring Grooves{0653,1214}
1979/05/14
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Wider Connecting Rods Have More Bearing Area{1214,1218}
1979/11/05
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Connecting Rod Bearing Used{0372,1203,1219}
1989/08/21
Plasma Top Piston Rings Replace Chrome Rings{1215,1214}
1989/09/11
Service Tips For Piston Cooling Jets (Tubes){1331}
1990/11/26
New Piston Pin Retainer Used{1225}
1991/10/14
Cylinder Pack Puller Groups Improved {0705,1239}
1993/01/18
Be Sure Correct Piston Cooling Jets Are Installed{1331}
1994/11/28
A New One Piece Steel Piston is Available {1214, 1225}
2007/07/02
New Guidelines for Inspecting Pistons {1214}
2006/01/02
New Piston Pin Is Now Available in 3400 Cylinder Packs {1225, 1239}
2009/07/06
A New Connecting Rod Bearing is Available {1219, 1225}
2008/12/29
A New Connecting Rod Bearing is Available {1218, 1219, 1225}
2009/02/09
An Improved Top Piston Ring Is Now Used with the Aluminum Pistons in the 3406, 3408, and 3412 Engines of Certain Machines {1215}
2012/04/24
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Check The Radiator Fan Spider Assembly When Doing Yearly General Maintenance{1356}
1989/07/24
Engine Coolant Can Be Recycled{1395}
1989/11/13
Special Instruction
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Disassembly and Assembly
Fan Drive (Driven)
3408 VEHICULAR ENGINE FOR D8L TRACTOR
Fan Drive
3408 VEHICULAR ENGINE FOR D8L TRACTOR
Crankshaft Vibration Damper
3408 VEHICULAR ENGINE FOR D8L TRACTOR
Vibration Damper and Pulley - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines
Vibration Damper and Pulley - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines
Service Magazine
New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23
Fan Now Driven By Crankshaft{1356,1357,1358,1359,1360}
1984/05/21
New Vibration Damper Assembly Has Better Heat Resistance {1205}
1984/06/25
Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01
Some Wobble Is Acceptable In Rubber Vibration Dampers For Crankshafts{1205}
1977/10/31
Identification Of External Terminals On Alternators{1405,1406,1400}
1987/03/23
Alternator &quot;R&quot; Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04
Check Alternator Output Connection Prior To Machine Delivery{1405}
1987/05/18
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut {0601}
1988/01/25
New 35-Ampere Alternator Used On Some Engines In Caterpillar Equipment{1405,1406}
1979/08/13
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Recommendations For Inspection And Replacement Of Rubber and Viscous Crankshaft Dampers{1205}
1995/08/21
Identification Of External Terminals On Alternators {1405,1406,1400}
1998/12/07
Reuse And Salvage Guidelines
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Bench Test Procedures
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Gear Pumps {5073}
Tool Operating Manual
Using The Inspection Borescopes 1U5268 and 8T9290 Borescopes
Using The Inspection Borescopes 1U5268 and 8T9290 Borescopes
Service Magazine
6V2086 And 6V2087 Seal And Wear Sleeve Installers Available{0622,1160,1161}
1980/09/01
6V3197 Spacer, 6V3041 Tool Group Available For Use During Removal and Installation Of Piston Pin Bearings{0622,1219,1218,1214}
1981/03/30
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
6V6142 And 6V6143 Installers Can Be Used To Install Crankshaft Seals And Wear Sleeves{0622,0626,1160,1161}
1982/11/01
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
Make Change To 6V2100 Multitach And 5P9698 Calibrator{0651}
1982/11/15

Truck sale:

Caterpillar D8L, Construction
250,617 USD 
Caterpillar D8L, Construction
- Dozers
METRO MACHINERY COMPANY LTD.
SUKHUMVIT RD, BANGCHAK, กรุงเทพมหานคร/Bangkok, Thailand
Caterpillar D8L, Construction
 
Caterpillar D8L, Construction
- Dozers
METRO MACHINERY COMPANY LTD.
SUKHUMVIT RD, BANGCHAK, กรุงเทพมหานคร/Bangkok, Thailand
Caterpillar D8L, Construction
75,000 
Caterpillar D8L, Construction
- Dozers
NMC
CATERPILLAR D8L 1984
 
CATERPILLAR D8L 1984
- TRACK TYPE TRACTORS
MILTON CAT
100 Quarry Drive - MILFORD - Massachus
1985 CAT D8L
USD $57,950 
1985 CAT D8L

Global Heavy Resources Inc.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.