AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

116-6566 DAMPER & PULLEY GP S/N 99C7569-UP D8L TRACK-TYPE TRACTOR


BASIC ENGINE
DAMPER GP
FLYWHEEL GP
GEAR GP
FLYWHEEL GP
HOUSING GP-FLYWHEEL
HOUSING GP-FRONT
LIFTING GP-ENGINE
PAN GP-OIL
PISTON & ROD GP

TRACK-TYPE TRACTOR D8L TRACK-TYPE TRACTOR 53Y
 3408E Engine Emissions Retrofit Repower Tier I For D8L Tractor 53Y00001-UP (MACHINE) SEBP4813 D8L 53Y   (1981)

BASIC ENGINE

DAMPER GP
DAMPER & PULLEY GP
116-6566 DAMPER & PULLEY GP
 

#SEBP48130020
 

116-6566: DAMPER & PULLEY GP

116-6566 DAMPER & PULLEY GP
S/N 99C7569-UP
i00487805 SEBP4813
1166566 DAMPER & PULLEY GP Parts scheme
  For full view, you need register

Parts for your D8L TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-2109 [1] ADAPTER-DAMPER  
2. 7W-2338 [1] SPACER  
3. 338-9808 [1] DAMPER AS  
4. 114-4295 [1] PULLEY-CRANKSHAFT (1-GROOVE, 4-GROOVE)  
5. 113-9122 [1] BOLT (5/8-18X7-IN)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP48130021
 

2W-8025: FLYWHEEL GP

2W-8025 FLYWHEEL GP
S/N 99C7569-UP
i00360637 SEBP4813
2W8025 FLYWHEEL GP Parts scheme
  For full view, you need register

Parts for your D8L TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 107-9192 [1] FLYWHEEL AS  
2. 4N-2514 [1] GEAR (113-TEETH)  
3. 5L-2683 [12] BOLT (5/8-18X5.25-IN)  
  4D-3704 [12] WASHER-HARD (17X30X5-MM THK)  
 

#SEBP48130022
 

126-7281: GEAR GP-FRONT

126-7281 GEAR GP-FRONT
S/N 99C7569-UP
i00093598 SEBP4813
1267281 GEAR GP-FRONT Parts scheme
  For full view, you need register

Parts for your D8L TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 124-7609 [1] GEAR-PUMP IDLER (86-TEETH)  
2. 101-6713 [1] PLATE-RETAINING  
3. 5P-5855 [4] BOLT-12 POINT HEAD (1/2-13X1.75-IN)  
4. 112-9217 [1] PLATE-THRUST  
5. 2B-2695 [4] BOLT (5/16-18X0.875-IN)  
6. 271-5661 [1] GEAR AS-IDLER (80, 43-TEETH)  
  1B-8705 [1] KEY-WOODRUFF  
6A. 131-7123 [1] BUSHING  
7. 1B-8705 [1] KEY-WOODRUFF  
8. 117-9712 [1] SHAFT-DRIVE IDLER  
9. 3G-2292 [5] BOLT-LOCKING (3/8-16X0.87-IN)  
10. 7E-5661 [1] GEAR-OIL PUMP DRIVE (69-TEETH)(ENGINE)  
11. 0S-1571 [1] BOLT (3/8-16X1.75-IN)  
12. 1P-7346 [1] WASHER-HARD (10.2X35X6-MM THK)  
13. 7N-2443 [1] WASHER-THRUST (2.508X3.5X0.188-IN THK)  
 

#SEBP48130023
 

7N-9574: GEAR GP-REAR

7N-9574 GEAR GP-REAR
S/N 99C7569-UP
i00411833 SEBP4813
7N9574 GEAR GP-REAR Parts scheme 7N9574 GEAR GP-REAR Parts scheme
  For full view, you need register

Parts for your D8L TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9Y-9929 [2] ADAPTER AS  
    (EACH INCLUDES)
  1T-0550 [2] PIN-SPRING  
2. 1A-2029 [12] BOLT (3/8-16X1.125-IN)  
3. 8N-0605 [1] COVER-FLYWHEEL HOUSING  
4. 9X-7371 [1] SEAL-O-RING  
5. 2W-7611 C [1] GEAR-BALANCER (64-TEETH)  
6. 4N-1235 [2] SHAFT-IDLER GEAR  
7. 2W-7614 C [1] GEAR-CRANKSHAFT (64-TEETH)  
8. 4N-0684 [1] DOWEL  
9. 2W-7615 C [1] GEAR-IDLER (64-TEETH)  
10. 030-8194 [1] CONNECTOR  
  6V-4589 [1] SEAL-O-RING  
11. 032-1267 [1] CONNECTOR (STRAIGHT)  
12. 8N-7806 I [1] HOSE AS  
13. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
14. 0S-1595 [2] BOLT (1/2-13X1.25-IN)  
  5P-8245 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
15. 9S-8752 [2] NUT-FULL (3/8-16-THD)  
16. 1A-2029 [8] BOLT (3/8-16X1.125-IN)  
17. 5M-2894 [12] WASHER-HARD (10.2X18.5X2.5-MM THK)  
18. 5P-1370 [2] BEARING AS-ROLLER  
19. 5P-8429 [2] SEAL-O-RING  
20. 4N-7183 [2] RING-RETAINING  
21. 1T-0720 [12] BOLT-12 POINT HEAD (3/8-16X1.25-IN)  
22. 2W-7610 [2] GEAR (64-TEETH)  
    (PUMP DRIVE)
23. 4N-1232 [1] WASHER-RETAINING  
24. 4N-1720 [1] COVER-BALANCE WEIGHT  
25. 3G-2292 C [4] BOLT-LOCKING (3/8-16X0.87-IN)  
26. 4N-0848 [1] SLEEVE-WEAR  
27. 502-4034 [1] SEAL-O-RING  
28. 5K-9065 [2] RING-RETAINING  
29. 1D-4566 [8] BOLT (1/2-13X3.5-IN)  
30. 6V-7423 [2] BEARING AS-ROLLER  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP48130024
 

128-2982: HOUSING GP-FLYWHEEL

128-2982 HOUSING GP-FLYWHEEL
S/N 99C7569-UP
i00520062 SEBP4813
1282982 HOUSING GP-FLYWHEEL Parts scheme
  For full view, you need register

Parts for your D8L TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 127-3605 [1] HOUSING AS  
  1W-3136 [1] BAFFLE  
2. 0S-1619 [4] BOLT (3/8-16X3-IN)  
3. 8T-6764 [1] PLUG-PIPE (1/8-27-THD)  
4. 161-7293 [1] GASKET-CYLINDER  
5. 9M-4225 [2] BOLT (3/8 NCX4 3/8)  
6. 1A-5964 [2] BOLT (3/8-16X4.5-IN)  
7. 2P-2772 [2] COVER  
8. 4N-0933 [2] GASKET  
9. 1A-2029 [2] BOLT (3/8-16X1.125-IN)  
10. 5M-2894 [10] WASHER-HARD (10.2X18.5X2.5-MM THK)  
11. 8T-6765 [4] PLUG-PIPE (1/4-18-THD)  
12. 5P-8245 [8] WASHER-HARD (13.5X25.5X3-MM THK)  
13. 0S-1590 [6] BOLT (3/8-16X2-IN)(MARKED Y)  
14. 3S-0036 [2] PLUG-CORE  
15. 3D-2871 [2] STUD-TAPERLOCK (3/8-16X1.5-IN)  
16. 8T-6761 [1] PLUG-PIPE (1-11-1/2 NPT THD)  
17. 0L-1352 [1] BOLT (3/8-16X3.25-IN)  
18. 8M-9124 [1] WASHER (10X22.5X8-MM THK)  
19. 2H-6488 [8] BOLT (1/2-13X5-IN)(MARKED X)  
20. 5F-0304 [1] PLUG (FLYWHEEL HOUSING)  
21. 2A-1162 [1] GASKET  
22. 1W-3189 [6] SPACER (10X18X20-MM THK)  
23. 4C-9612 B SEALANT-SILICONE  
  B   USE AS REQUIRED
 

#SEBP48130025
 

127-3514: HOUSING GP-FRONT

127-3514 HOUSING GP-FRONT
S/N 99C7569-9970
i00516838 SEBP4813
1273514 HOUSING GP-FRONT Parts scheme
  For full view, you need register

Parts for your D8L TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 166-9145 [1] GASKET-CYLINDER BLOCK  
2. 172-9313 [1] HOUSING-TIMING GEAR  
3. 3K-3256 [1] STUD-TAPERLOCK (3/8-16X1.7-IN)  
4. 2K-4973 [1] LOCKNUT (3/8-16-THD)  
5. 0L-1352 [2] BOLT (3/8-16X3.25-IN)  
6. 5M-2894 [6] WASHER-HARD (10.2X18.5X2.5-MM THK)  
7. 0T-0573 [3] BOLT (3/8-16X2.75-IN)  
8. 4B-8641 [1] STUD (3/8-16X2.24-IN)  
9. 129-6628 YC [2] SENSOR GP-SPEED (ENGINE TIMING)  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP48130026
 

127-3514: HOUSING GP-FRONT

127-3514 HOUSING GP-FRONT
S/N 99C9971-UP
i02564698 SEBP4813
1273514 HOUSING GP-FRONT Parts scheme
  For full view, you need register

Parts for your D8L TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 166-9145 [1] GASKET-CYLINDER BLOCK  
2. 172-9313 [1] HOUSING-TIMING GEAR  
3. 3K-3256 [1] STUD-TAPERLOCK (3/8-16X1.7-IN)  
4. 2K-4973 [1] LOCKNUT (3/8-16-THD)  
5. 0L-1352 [2] BOLT (3/8-16X3.25-IN)  
6. 5M-2894 [6] WASHER-HARD (10.2X18.5X2.5-MM THK)  
7. 0T-0573 [3] BOLT (3/8-16X2.75-IN)  
8. 4B-8641 [1] STUD (3/8-16X2.24-IN)  
9. 265-9033 YC [2] SENSOR GP-SPEED (ENGINE TIMING)  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP48130027
 

124-4461: LIFTING GP-ENGINE

124-4461 LIFTING GP-ENGINE
S/N 99C7569-UP
i00089920 SEBP4813
1244461 LIFTING GP-ENGINE Parts scheme
  For full view, you need register

Parts for your D8L TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-8245 [8] WASHER-HARD (13.5X25.5X3-MM THK)  
2. 118-8475 [1] BRACKET-LIFTING (RH)  
3. 7B-3235 [8] BOLT (1/2-13X1.375-IN)  
4. 118-9115 [1] BRACKET-LIFTING (LH)  
 

#SEBP48130028
 

7W-6381: PAN GP-OIL

7W-6381 PAN GP-OIL -ENGINE
S/N 99C7569-UP
i00414480 SEBP4813
7W6381 PAN GP-OIL Parts scheme
  For full view, you need register

Parts for your D8L TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-1151 [1] GASKET  
2. 9S-4181 [1] PLUG (1-5/16-12-THD)  
3. 7M-8485 [1] SEAL-O-RING  
4. 5M-2894 [24] WASHER-HARD (10.2X18.5X2.5-MM THK)  
5. 2P-3203 [26] BOLT-WASHER HEAD (3/8-16X1.25-IN)  
6. 379-5053 [1] SEAL-O-RING  
7. 4P-0519 [1] ADAPTER AS-DRAIN  
  109-5840 [1] ADAPTER-PLUG  
7A. 109-5839 [1] PLUG-DRAIN (ENGINE)  
8. 2M-5407 [1] GASKET  
9. 0S-1587 [2] BOLT (1/2-13X1.75-IN)  
10. 8T-6761 [1] PLUG-PIPE (1-11-1/2 NPT THD)  
11. 180-5738 [1] PAN-OIL  
12. 9S-8752 [6] NUT-FULL (3/8-16-THD)  
13. 3B-1915 [6] BOLT (3/8-16X1.375-IN)  
14. 1C-2251 [6] BOLT (3/8-16X1.87-IN)  
15. 1W-5814 [1] PAN-OIL  
16. 1W-5813 [1] GASKET-OIL PAN  
17. 8S-9191 [4] BOLT (3/8-16X4-IN)  
18. 1W-5817 [1] PAN-OIL  
19. 6N-2469 [1] GASKET-OIL PAN  
20. 2P-3204 [2] BOLT-WASHER HEAD  
21. 0S-1594 [2] BOLT (3/8-16X1-IN)  
22. 2M-1656 [1] COVER  
 

#SEBP48130029
 

192-8808: PISTON & ROD GP

192-8808 PISTON & ROD GP
S/N 99C7569-UP
15.5:1 RATIO
i01404352 SEBP4813
1928808 PISTON & ROD GP Parts scheme
  For full view, you need register

Parts for your D8L TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 192-2208 N [1] BODY AS-PISTON  
2. 524-7118 [1] PIN-PISTON  
3. 7E-5665 N [2] RETAINER-PIN  
4. 160-8178 [1] ROD AS-CONNECTING  
4A. 4P-8495 N [1] BUSHING  
4B. 8L-3441 [2] NUT (9/16-18-THD)  
4C. 6N-8942 [2] BOLT-CONNECTING ROD  
5. 328-5574 H [1] BEARING-CONNECTING ROD (STANDARD)  
  4W-5702 ABJ BEARING-CONNECTING ROD (0.635-MM US)  
  4W-5703 ABL BEARING-CONNECTING ROD (1.27-MM US)  
6. 134-3761 N [1] RING-PISTON (TOP)  
7. 192-8807 N [1] RING-INTERMEDIATE  
8. 213-7454 N [1] RING-PISTON (OIL CONTROL)  
9. 173-0147 [1] JET AS-PISTON COOLING  
10. 150-1156 [1] BOLT-SPECIAL (OIL JET)  
   
    AVAILABLE REPAIR KIT(S):
  9Y-6188 ABHPS KIT-ROD BEARING (STANDARD)  
  9Y-6189 ABJPS KIT-ROD BEARING (0.635-MM US)  
  9Y-6190 ABLPS KIT-ROD BEARING (1.27-MM US)  
  442-4728 ABN [1] KIT-PISTON  
    (INCLUDES RINGS, BUSHING, PISTON BODY ASSEMBLY, RETAINER, LINER, SINGLE CYLINDER LINER GASKET KIT)
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  H   KIT MARKED H INCLUDES SIX OF PART MARKED H
  J   KIT MARKED J INCLUDES SIX OF PART MARKED J
  L   KIT MARKED L INCLUDES SIX OF PART MARKED L
  N   KIT MARKED N SERVICES PART(S) MARKED N
  P   QTY OF 2 KITS REQUIRED FOR 3412 ENGINE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  S   NOT FOR USE WITH 3408
 

Information:

Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR TIGHTENING THE DAMPER ADAPTOR BOLTS ON CERTAIN 3408, 3408C, 3408E, 3412, 3412C, 3412D, 3412E, C27, C32 ENGINES 773E OFF HIGHWAY TRUCKS, AND D10T, D9R TRACK TYPE TRACTORS
PRODUCT IMPROVEMENT PROGRAM FOR TIGHTENING THE DAMPER ADAPTOR BOLTS ON CERTAIN 3408, 3408C, 3408E, 3412, 3412C, 3412D, 3412E, C27, C32 ENGINES 773E OFF HIGHWAY TRUCKS, AND D10T, D9R TRACK TYPE TRACTORS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Specifications
Vibration Damper
3408E and 3412E Engines for Caterpillar Built Machines
Vibration Damper
3408E and 3412E Engines for Caterpillar Built Machines
Service Letter-China
PRODUCT IMPROVEMENT PROGRAM FOR TIGHTENING THE DAMPER ADAPTOR BOLTS ON CERTAIN 3408, 3408C, 3408E, 3412, 3412C, 3412D, 3412E, C27, C32 ENGINES 773E OFF HIGHWAY TRUCKS, AND D10T, D9R TRACK TYPE TRACTORS
PRODUCT IMPROVEMENT PROGRAM FOR TIGHTENING THE DAMPER ADAPTOR BOLTS ON CERTAIN 3408, 3408C, 3408E, 3412, 3412C, 3412D, 3412E, C27, C32 ENGINES 773E OFF HIGHWAY TRUCKS, AND D10T, D9R TRACK TYPE TRACTORS
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Service Letter-APD
PRODUCT IMPROVEMENT PROGRAM FOR TIGHTENING THE DAMPER ADAPTOR BOLTS ON CERTAIN 3408, 3408C, 3408E, 3412, 3412C, 3412D, 3412E, C27, C32 ENGINES 773E OFF HIGHWAY TRUCKS, AND D10T, D9R TRACK TYPE TRACTORS
PRODUCT IMPROVEMENT PROGRAM FOR TIGHTENING THE DAMPER ADAPTOR BOLTS ON CERTAIN 3408, 3408C, 3408E, 3412, 3412C, 3412D, 3412E, C27, C32 ENGINES 773E OFF HIGHWAY TRUCKS, AND D10T, D9R TRACK TYPE TRACTORS
Testing and Adjusting
Vibration Damper - Check
3408E and 3412E Engines for Caterpillar Built Machines
Disassembly and Assembly
Crankshaft Vibration Damper
3408 VEHICULAR ENGINE FOR D8L TRACTOR
Vibration Damper and Pulley - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines
Vibration Damper and Pulley - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines
Service Magazine
New Vibration Damper Assembly Has Better Heat Resistance {1205}
1984/06/25
Some Wobble Is Acceptable In Rubber Vibration Dampers For Crankshafts{1205}
1977/10/31
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut {0601}
1988/01/25
Recommendations For Inspection And Replacement Of Rubber and Viscous Crankshaft Dampers{1205}
1995/08/21
Procedure for Installing the Front Gears and Dampers on Certain Caterpillar Engines {1151, 1162, 1205, 1206}
2008/02/18

Caterpillar Parts SIS Catalog D8L :

CYLINDER HEAD GP
130-7312 CYLINDER HEAD GP
CYLINDER HEAD GP
107-7320 CYLINDER HEAD GP
CYLINDER HEAD AS
143-3614 CYLINDER HEAD AS
CYLINDER HEAD AS
143-0041 CYLINDER HEAD AS
CYLINDER HEAD AS
143-0040 CYLINDER HEAD AS
CYLINDER BLOCK GP
109-9009 CYLINDER BLOCK GP
CYLINDER BLOCK AS
122-2245 CYLINDER BLOCK AS
CYLINDER BLOCK AS
110-3779 CYLINDER BLOCK AS
FLYWHEEL GP
2W-8025 FLYWHEEL GP
GEAR GP-FRONT
126-7281 GEAR GP-FRONT
GEAR GP-REAR
7N-9574 GEAR GP-REAR
HOUSING GP-FLYWHEEL
128-2982 HOUSING GP-FLYWHEEL
HOUSING GP-FRONT
127-3514 HOUSING GP-FRONT
HOUSING GP-FRONT
127-3514 HOUSING GP-FRONT
LIFTING GP-ENGINE
124-4461 LIFTING GP-ENGINE
PAN GP-OIL
7W-6381 PAN GP-OIL

Truck sale:

Caterpillar D8L, Construction
250,617 USD 
Caterpillar D8L, Construction
- Dozers
METRO MACHINERY COMPANY LTD.
SUKHUMVIT RD, BANGCHAK, กรุงเทพมหานคร/Bangkok, Thailand
Caterpillar D8L, Construction
 
Caterpillar D8L, Construction
- Dozers
METRO MACHINERY COMPANY LTD.
SUKHUMVIT RD, BANGCHAK, กรุงเทพมหานคร/Bangkok, Thailand
Caterpillar D8L, Construction
75,000 
Caterpillar D8L, Construction
- Dozers
NMC
CATERPILLAR D8L 1984
 
CATERPILLAR D8L 1984
- TRACK TYPE TRACTORS
MILTON CAT
100 Quarry Drive - MILFORD - Massachus
1985 CAT D8L
USD $57,950 
1985 CAT D8L

Global Heavy Resources Inc.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.