134-2596 PLUG GP-CYLINDER BLOCK S/N 99C7569-UP D8L TRACK-TYPE TRACTOR

BASIC ENGINE

CYLINDER BLOCK GP

0. 134-2596 PLUG GP-CY

CYLINDER HEAD GP

1. 124-4456 PLUG GP-CY

VALVE MECHANISM GP

2. 107-1954 ROCKER ARM

CRANKSHAFT GP

3. 319-0785 SEAL GP-CR
4. 319-7401 SEAL GP-CR

MOUNTING GP-ENGINE

5. 6N-5885 SUPPORT GP
6. 179-7086 TRUNNION G

VALVE MECHANISM GP

7. 108-1551 VALVE MECH

YOKE GP

8. 128-3339 YOKE GP

LUBRICATION SYSTEM

PUMP GP-ENGINE OIL

9. 4N-2481 FASTENER G
0. INFORMATION

TRACK-TYPE TRACTOR D8L TRACK-TYPE TRACTOR 53Y
3408E Engine Emissions Retrofit Repower Tier I For D8L Tractor 53Y00001-UP (MACHINE) SEBP4813 D8L 53Y (1981)

BASIC ENGINE

CYLINDER BLOCK GP

130-7301 COVER GP-CYLINDER BLOCK

130-7303 COVER GP-CYLINDER BLOCK

110-3779 CYLINDER BLOCK AS

122-2245 CYLINDER BLOCK AS

109-9009 CYLINDER BLOCK GP

134-2596 PLUG GP-CYLINDER BLOCK

#SEBP48130030

134-2596: PLUG GP-CYLINDER BLOCK

PLUG GP-CYLINDER BLOCK

134-2596 PLUG GP-CYLINDER BLOCK
S/N 99C7569-UP

i00508531 SEBP4813

1342596 PLUG GP-CYLINDER BLOCK Parts scheme

For full view, you need register

Parts for your D8L TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9S-4190	[1]	PLUG-O-RING (7/8-14-THD)
2.	6V-4589	[2]	SEAL-O-RING
3.	7W-6534	[6]	PLUG-PIPE
4.	8T-6757	[2]	PLUG-PIPE
5.	6V-3965	[1]	FITTING (QUICK DISCONNECT)
6.	6V-5049	[1]	SEAL-O-RING
7.	5P-1404	[1]	ADAPTER
8.	6V-0852	[1]	CAP-DUST

#SEBP48130031

124-4456: PLUG GP-CYLINDER HEAD

PLUG GP-CYLINDER HEAD

124-4456 PLUG GP-CYLINDER HEAD
S/N 99C7569-UP

i00089919 SEBP4813

1244456 PLUG GP-CYLINDER HEAD Parts scheme

For full view, you need register

Parts for your D8L TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8T-6762	[6]	PLUG-PIPE (1/2-14-THD)(1/2-14 NPTF THD)
2.	7X-7731	[2]	PLUG-PIPE (3/4-14-THD)
3.	5P-0063	[3]	PLUG-CUP
4.	4N-0932	[2]	PLUG-CUP

#SEBP48130032

107-1954: ROCKER ARM GP

ROCKER ARM GP

107-1954 ROCKER ARM GP
S/N 99C7569-UP
PART OF 108-1551 VALVE MECHANISM GP

i00089844 SEBP4813

For full view, you need register

Parts for your D8L TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	134-2263	[2]	RING-RETAINING
2.	2N-7228	[2]	WASHER (1X1.5X0.03-IN THK)
3.	4N-5614	[2]	ROCKER ARM AS
4.	336-6781	[2]	SCREW (3/8-24X4.78-IN)
5.	9L-7712	[2]	NUT (3/8-24-THD)
6.	122-0163	[1]	BRACKET-SHAFT
7.	6V-3536	[2]	DOWEL
8.	135-3225	[1]	SHAFT AS
	2D-6642 F	[2]	BALL
	F		NOT SHOWN
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP48130033

319-0785: SEAL GP-CRANKSHAFT

SEAL GP-CRANKSHAFT

319-0785 SEAL GP-CRANKSHAFT -REAR
S/N 99C7569-UP
PART OF 1W-5010 CRANKSHAFT GP
FOR USE WITH CCW ROTATION

i02958100 SEBP4813

For full view, you need register

Parts for your D8L TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	142-5868 J	[1]	SEAL-CRANKSHAFT (REAR)

			CRANKSHAFT SEAL 366-6004 IS AVAILABLE FOR FLOODED CONDITIONS
	J		FOR USE WITH DRY CLUTCH APPLICATIONS

#SEBP48130034

319-7401: SEAL GP-CRANKSHAFT

SEAL GP-CRANKSHAFT

319-7401 SEAL GP-CRANKSHAFT -FRONT
S/N 99C7569-UP
PART OF 1W-5010 CRANKSHAFT GP
FOR USE WITH CW ROTATION

i02957871 SEBP4813

For full view, you need register

Parts for your D8L TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
1.	142-5867	[1]	SEAL-CRANKSHAFT (FRONT)

#SEBP48130035

6N-5885: SUPPORT GP-ENGINE

SUPPORT GP-ENGINE

6N-5885 SUPPORT GP-ENGINE -FRONT
S/N 99C7569-UP

i00387897 SEBP4813

For full view, you need register

Parts for your D8L TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	0S-1589	[4]	BOLT (5/8-11X1.75-IN)
	5P-8247	[4]	WASHER-HARD (17X32X3.5-MM THK)
2.	7N-6697	[1]	SUPPORT AS-ENGINE
3.	8F-9836 C	[1]	BOSS (3/8-16-THD)
	C		CHANGE FROM PREVIOUS TYPE

#SEBP48130036

179-7086: TRUNNION GP-ENGINE

TRUNNION GP-ENGINE

179-7086 TRUNNION GP-ENGINE
S/N 99C7569-UP

i01373982 SEBP4813

For full view, you need register

Parts for your D8L TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1W-3014	[1]	ADAPTER AS
1A.	4N-0683	[2]	DOWEL
	4W-6150	[1]	ADAPTER-SUPPORT
2.	343-4835	[1]	MOUNT AS
3.	0S-1573	[8]	BOLT (1/2-13X4-IN)

#SEBP48130037

108-1551: VALVE MECHANISM GP

VALVE MECHANISM GP

108-1551 VALVE MECHANISM GP
S/N 99C7569-UP

i00093527 SEBP4813

For full view, you need register

Parts for your D8L TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	107-1954 Y	[8]	ROCKER ARM GP
2.	100-6889	[16]	BRIDGE-VALVE
3.	2P-9845	[8]	BOLT (3/4-16X11.5-IN)
	5H-1504	[8]	WASHER-HARD (20X33.5X5-MM THK)
4.	4W-5998	[16]	PUSHROD AS
5.	305-6843	[16]	SPRING-GUIDE
6.	422-3883	[16]	LIFTER AS-VALVE
7.	5M-2894	[8]	WASHER-HARD (10.2X18.5X2.5-MM THK)
8.	0L-1143	[8]	BOLT (3/8-16X2.5-IN)
9.	116-7220	[8]	SEAL-RECTANGULAR
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP48130038

128-3339: YOKE GP

YOKE GP

128-3339 YOKE GP
S/N 53Y1-UP
PART OF 314-4172 INSTALLATION GP-ENGINE

i00520184 SEBP4813

For full view, you need register

Parts for your D8L TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	128-3340	[1]	FLANGE
2.	128-3341	[1]	COVER
3.	7X-0343	[2]	BOLT (5/8-11X1.25-IN)
4.	6V-8260	[1]	SEAL-O-RING
5.	2S-3029	[1]	BALL BEARING
6.	128-3813	[1]	SEAL-LIP TYPE
7.	1L-4775	[1]	RING-RETAINING

#SEBP48130039

4N-2481: FASTENER GP-OIL PUMP MOUNTING

FASTENER GP-OIL PUMP MOUNTING

4N-2481 FASTENER GP-OIL PUMP MOUNTING -ENGINE
S/N 99C7569-UP

i00090164 SEBP4813

4N2481 FASTENER GP-OIL PUMP MOUNTING Parts scheme

For full view, you need register

Parts for your D8L TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	0L-1143	[2]	BOLT (3/8-16X2.5-IN)
2.	0S-1590	[1]	BOLT (3/8-16X2-IN)
3.	5M-2894	[3]	WASHER-HARD (10.2X18.5X2.5-MM THK)

Information:

BASIC ENGINE

CYLINDER BLOCK GP

Truck Engine News

The Cylinder Liners Have a New Appearance {1216}
2005/03/01

Special Instruction

Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}

Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}

Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}

Installation Of 7N9013 Gasket Service Group{1101, 1221}
Installation Of 7N9013 Gasket Service Group{1101, 1221}

Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}

Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}

Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}

Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}

Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}

Installation Of 2W3815 Or 5N93 Inserts{1217}
Installation Of 2W3815 Or 5N93 Inserts{1217}

Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}

Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}

Installation Instructions For The 160-9874 Gasket Kit {1213, 7555}
Installation Instructions For The 160-9874 Gasket Kit {1213, 7555}

Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}

Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}

Visual Inspection of Liner Seats for 3400, C15, C16, and C18 Series Engines{1200}
Visual Inspection of Liner Seats for 3400, C15, C16, and C18 Series Engines{1200}

Service Letter-NACD

New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock

Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory

Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock

Service Letter-Australia

New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock

Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory

Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock

Service Letter-CFEL

New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock

Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory

Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock

Service Letter-CSARL

New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock

Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory

Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock

Service Letter-Americas

New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock

Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory

Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock

Service Letter-Brazil

New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock

Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory

Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock

Service Letter-Truck/Ag/Marine

New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock

Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory

Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock

Technical Information Bulletin

0R-3711, 0R-3714, 0R-3751, 0R-3752 Remanufactured Long Blocks
0R-3711, 0R-3714, 0R-3751, 0R-3752 Remanufactured Long Blocks

Specifications

Cylinder Block
3408 ENGINE FOR CATERPILLAR BUILT MACHINES

Cylinder Liners
3408 ENGINE FOR CATERPILLAR BUILT MACHINES

Connecting Rod And Main Bearing Journals
3408 ENGINE FOR CATERPILLAR BUILT MACHINES

Cylinder Block
3408E and 3412E Engines for Caterpillar Built Machines

Cylinder Liner
3408E and 3412E Engines for Caterpillar Built Machines

Tool Operating Manual

9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}

362-4250 Deck Height Measuring Tool{1201}
362-4250 Deck Height Measuring Tool{1201}

Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}

Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}

420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}

Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}

Service Letter-China

New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock

Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory

Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock

Service Letter-Asia

New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock

Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory

Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock

Reuse And Salvage Guidelines

Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}

Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}

Reuse and Salvage for 3114, 3116, and 3126 Engine Series Cylinder Blocks {1201}
Reuse and Salvage for 3114, 3116, and 3126 Engine Series Cylinder Blocks {1201}

Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}

Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}

Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}

Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}

Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}

Service Letter-APD

New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock

Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory

Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock

Testing and Adjusting

Cylinder Block - Inspect
3408E and 3412E Engines for Caterpillar Built Machines

Excessive Bearing Wear - Inspect
3408E and 3412E Engines for Caterpillar Built Machines

Main Bearings - Inspect
3408E and 3412E Engines for Caterpillar Built Machines

Cylinder Liner Projection - Inspect
3408E and 3412E Engines for Caterpillar Built Machines

Disassembly and Assembly

Spacer Plates
3408 VEHICULAR ENGINE FOR D8L TRACTOR

Piston Cooling Tubes
3408 VEHICULAR ENGINE FOR D8L TRACTOR

Cylinder Liners
3408 VEHICULAR ENGINE FOR D8L TRACTOR

Crankshaft Main Bearings
3408 VEHICULAR ENGINE FOR D8L TRACTOR

Camshaft Bearings
3408 VEHICULAR ENGINE FOR D8L TRACTOR

Bearing Clearance - Check
3408E and 3412E Engines for Caterpillar Built Machines

Cylinder Liner - Remove
3408E and 3412E Engines for Caterpillar Built Machines

Piston Cooling Jets - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines

Camshaft Bearings - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines

Crankshaft Main Bearings - Remove
3408E and 3412E Engines for Caterpillar Built Machines

Crankshaft Main Bearings - Install
3408E and 3412E Engines for Caterpillar Built Machines

Cylinder Liner - Install
3408E and 3412E Engines for Caterpillar Built Machines

Camshaft Bearings - Remove
3408E and 3412E Engines for Caterpillar Built Machines

Camshaft Bearings - Install
3408E and 3412E Engines for Caterpillar Built Machines

Service Magazine

Crankshaft Failures; New Thrust Plate{1203,1202,1230}
1981/05/04

Remove Piston Cooling Tubes Before Removal Of Pistons And Connecting Rods{1214,1218,1201,1225,1307}
1981/07/13

New Cylinder Liners And O-Ring Seals Give Longer Seal Life{1216,1201,1213,1227}
1981/12/14

Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21

Use Correct Part Numbers For Main And Connecting Rod Bearings{1230,1203,1219}
1982/04/12

Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03

Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03

New Crankshaft Main Bearings Used{1203}
1982/05/10

Liquid Sealant Used Between Flywheel Housing And Cylinder Block{1157,0375}
1982/08/23

New Head Gasket Improves Seal Between Block And Liner Flange{1101,1201}
1982/09/27

Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11

6V4869 Adapter And 6V6174 Plug Can Be Used To Install Camshaft Bearings{1211,0621}
1982/11/22

Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29

New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29

Dimensions For Reconditioning Cylinder Blocks, Cylinder Heads{1201,1101,1103,1105}
1982/12/20

Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16

Reuse Of Engine Bearings{1230}
1983/05/16

New Liner Seat Insert Available{1217}
1983/08/15

New Connecting Rod And Main Bearings Used{1203,1219,1226,1227,1230}
1983/10/10

Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21

Dimensions For Reconditioning Cylinder Blocks, Cylinder Heads{1201,1101,1103,1105}
1984/04/23

Salvaging Cylinder Block Top Decks After Liner Seat Erosion{1201,1216,1217}
1984/06/04

New Cylinder Block Groups Used{1201}
1984/10/01

Install Crankshaft Thrust Bearings Correctly To Avoid Damage{1202,1203}
1985/02/11

New Crankshaft, Cylinder Block And Camshaft Used{1202,1201,1210}
1985/05/13

Use Care When Handling Water Seals For Cylinder Head Spacer Plates{1115}
1985/07/15

New Cylinder Liner Available{1201}
1986/02/10

Service Reminders For 3400 Family Of Diesel Engines{1204,1214,1331}
1986/05/05

Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02

Indications Of Engine Overspeeding When Only One Cam Lobe/Lifter Has Failed{1000,1100,1200}
1986/09/08

Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08

New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27

Modification To Holder To Machine Counterbore On Cylinder Block{0664,1201}
1977/02/28

Main And Connecting Rod Bearing Part Numbers {1203,1219,1230}
1987/01/26

Stronger Timing Gear Housing; Additional Stud Used At Top Of Housing{1151,1201}
1987/02/23

Self-Locking Bolts Used To Fasten Cover To Rear Of Cylinder Block{1201,3108}
1987/03/23

Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20

Recommendations For Preventing Cooling System Damage {1201}
1987/08/31

Mid-Life Bearing Maintenance Recommendations {1203}
1987/09/14

5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09

A Gasket Group Is Available To Give Improved Sealing For The Oil Supply To The Rocker Arms On Early Engines{1101,1102,1221}
1978/04/03

Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12

New Information On Reusable Cylinder Liners{1216}
1978/06/19

Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28

Head Bolt Holes In Cylinder Blocks Can Be Repaired{1201,1101}
1988/10/24

New Liner Seat Insert Available{1201,1216,1217}
1988/11/14

New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04

Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27

Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17

Improved Head Gasket Used; Service Tips {1124,1216,1221,7568}
1990/02/26

Service Tips For Piston Cooling Jets (Tubes){1331}
1990/11/26

Remanufactured Camshafts And Cam Kits Available For Parts Service{1210,1211,1212}
1990/12/17

New Bronze Thrust Plate Used On Center Main Bearing Of Crankshaft Groups{1203}
1990/12/17

Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts{1202}
1991/01/07

No Gaskets Used With Aluminum Flywheel Housings{1157}
1991/10/14

Thinner Spacer Plates Available For Parts Service{1221}
1992/06/29

New Liner Seat Inserts Available{1217}
1992/11/09

Cylinder Pack Puller Groups Improved {0705,1239}
1993/01/18

New Cylinder Head Gasket, Spacer Plate And Head Bolts Used; New Cylinder Liner Projection Measurement Method; New Cylinder Head Torque Sequence; Improved Coolant Flow (Cylinder Heads) {1124,1221,1216,1101}
1994/07/04

Be Sure Correct Piston Cooling Jets Are Installed{1331}
1994/11/28

New Material Used In O-Rings And Optional New Block Side Cover Replacement{1201}
1996/02/19

Procedure For Installing Steel Core Gasket At The Front Housing And The Flywheel Housing {1151,1157,1162}
1996/11/25

New 171-4660 Engine Stand Adapter Assembly Is Now Available {0701, 1000}
2000/04/17

Damaged Lifter Bores In 3400 Series Engines Can Be Used Again {1201}
2005/01/24

The Cylinder Liners Have a New Appearance {1216}
2005/03/14

Caterpillar Parts SIS Catalog D8L :

192-8808 PISTON & ROD GP

7W-6381 PAN GP-OIL

124-4461 LIFTING GP-ENGINE

127-3514 HOUSING GP-FRONT

128-2982 HOUSING GP-FLYWHEEL

7N-9574 GEAR GP-REAR

126-7281 GEAR GP-FRONT

124-4456 PLUG GP-CYLINDER HEAD

107-1954 ROCKER ARM GP

319-0785 SEAL GP-CRANKSHAFT

319-7401 SEAL GP-CRANKSHAFT

6N-5885 SUPPORT GP-ENGINE

179-7086 TRUNNION GP-ENGINE

108-1551 VALVE MECHANISM GP

128-3339 YOKE GP

Truck sale:

250,617 USD

Caterpillar D8L, Construction
- Dozers
METRO MACHINERY COMPANY LTD.
SUKHUMVIT RD, BANGCHAK, กรุงเทพมหานคร/Bangkok, Thailand

75,000

Caterpillar D8L, Construction
- Dozers
NMC

CATERPILLAR D8L 1984
- TRACK TYPE TRACTORS
MILTON CAT
100 Quarry Drive - MILFORD - Massachus

USD $57,950

1985 CAT D8L

Global Heavy Resources Inc.