AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

106-5171 MODULE GP-SYNCHRONIZING LIGHTS S/N 9FG1-UP; 7AJ1-UP; EKW1-UP 480-VOLT PART OF 131-1969, 131-1970 MODULE GP-SYNCHRONIZING LIGHTS, 130-7237, 141-1529 PANEL AR-CONTROL, 235-8390 WIRING GP-PANEL AN ATTACHMENT C18


OPERATOR STATION
PANEL GP

GENERATOR SET C18 GENERATOR SET EKW
 C18 Generator Set EKW00001-UP POWERED BY C18 Engine SEBP4857 C18 EKW   (2006)

OPERATOR STATION

PANEL GP
148-5368 MODULE GP-RELAY DRIVER
MODULE GP-SYNCHRONIZING LIGHTS
106-5169 MODULE GP-SYNCHRONIZING LIGHTS
MODULE GP-SYNCHRONIZING LIGHTS
106-5171 MODULE GP-SYNCHRONIZING LIGHTS
131-1969 MODULE GP-SYNCHRONIZING LIGHTS
131-1970 MODULE GP-SYNCHRONIZING LIGHTS
MODULE GP-SYNCHRONIZING LIGHTS
4W-8002 MODULE GP-SYNCHRONIZING LIGHTS
 

#SEBP48571730
 

106-5171: MODULE GP-SYNCHRONIZING LIGHTS

106-5171 MODULE GP-SYNCHRONIZING LIGHTS
S/N 9FG1-UP; 7AJ1-UP; EKW1-UP
480-VOLT
PART OF 131-1969, 131-1970 MODULE GP-SYNCHRONIZING LIGHTS, 130-7237, 141-1529 PANEL AR-CONTROL, 235-8390 WIRING GP-PANEL
AN ATTACHMENT
i00489790 SEBP4857
1065171 MODULE GP-SYNCHRONIZING LIGHTS Parts scheme
  For full view, you need register

Parts for your C18 GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6L-9872 [2] WASHER (SEALING)  
2. 4W-8754 [2] LENS-LAMP (CLEAR)  
3. 5N-3615 [2] LAMP (120-VOLT, 6-WATT)(CLEAR)  
4. 4W-8755 [2] HOUSING AS-LAMP  
5. 7C-0549 [1] PLATE AS-MODULE  
6. 4W-8757 [1] SWITCH-TOGGLE (ON/OFF CONTROL)  
7. 5N-5507 [2] RESISTOR  
8. 7C-4370 [1] BRACKET  
9. 106-5164 [1] COVER  
10. 7C-0972 [1] FILM-SYCHRONIZING PANEL  
11. 5L-5180 [1] WASHER (0.49X0.875X0.05-IN THK)  
12. 4B-2047 [2] NUT (10-24-THD)  
13. 227-8133 [2] SCREW-MACHINE (10-24X4.5-IN)  
14. 2N-3478 [2] SCREW-MACHINE (10-24X0.375-IN)  
15. 9F-8125 [4] LOCKWASHER  
16. 173-7181 [2] NUT (1/4-20-THD)  
17. 4D-2303 [4] WASHER (0.27X0.81X0.062-IN THK)  
 

#SEBP48571731
 

131-1969: MODULE GP-SYNCHRONIZING LIGHTS

131-1969 MODULE GP-SYNCHRONIZING LIGHTS
S/N 9FG1-UP; 7AJ1-UP
FOR USE WITH CONTROL PANELS REQUIRING MANUAL SYNCHRONIZING LIGHTS, GENERATOR MOUNTED EMCP II CONTROL PANEL
AN ATTACHMENT
i00507750 SEBP4857
  For full view, you need register

Parts for your C18 GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  106-5169 BLY [1] MODULE GP-SYNCHRONIZING LIGHTS  
  106-5171 BJY [1] MODULE GP-SYNCHRONIZING LIGHTS  
  B   USE AS REQUIRED
  J   REQUIRED WITH 0-480 VOLT GENERATORS ONLY
  L   REQUIRED WITH 600 VOLT GENERATORS ONLY
  Y   SEPARATE ILLUSTRATION
 

#SEBP48571732
 

131-1970: MODULE GP-SYNCHRONIZING LIGHTS

131-1970 MODULE GP-SYNCHRONIZING LIGHTS
S/N 9FG1-UP; 7AJ1-UP
FOR USE WITH CONTROL PANELS REQUIRING MANUAL SYNCHRONIZING LIGHTS AND A REVERSE POWER RELAY
AN ATTACHMENT
i00507752 SEBP4857
  For full view, you need register

Parts for your C18 GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  106-5169 BLY [1] MODULE GP-SYNCHRONIZING LIGHTS  
  106-5171 BJY [1] MODULE GP-SYNCHRONIZING LIGHTS  
  5N-5510 BJ [1] RELAY-REVERSE POWER  
  7C-4378 BL [1] RELAY-REVERSE POWER  
  B   USE AS REQUIRED
  J   REQUIRED FOR 0-480 VOLT GENERATORS ONLY
  L   REQUIRED FOR 600 VOLT GENERATORS ONLY
  Y   SEPARATE ILLUSTRATION
 

#SEBP48571733
 

4W-8002: MODULE GP-SYNCHRONIZING LIGHTS

4W-8002 MODULE GP-SYNCHRONIZING LIGHTS
S/N 9FG1-UP
PART OF 7W-0700 PANEL AR-CONTROL
FOR USAGE REFER TO CHART @@@@@ 4W-8000@@@@@
AN ATTACHMENT
i00380341 SEBP4857
4W8002 MODULE GP-SYNCHRONIZING LIGHTS Parts scheme
  For full view, you need register

Parts for your C18 GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3N-9115 [1] STRIP-TERMINAL  
2. 4W-8757 [1] SWITCH-TOGGLE (SYNCHRONIZING LIGHTS MODULE)  
3. 4W-8754 [2] LENS-LAMP (CLEAR)  
4. 5N-3615 [2] LAMP (120-VOLT, 6-WATT)(CLEAR)  
5. 4W-8755 [2] HOUSING AS-LAMP  
6. 4W-8760 [1] BRACKET-MODULE  
7. 4W-8758 [1] PLATE-MODULE  
8. 5N-5507 [2] RESISTOR  
9. 7W-0484 [1] MARKER  
10. 7W-9804 [1] FILM-IDENTIFICATION (SYNCHRONIZING PANEL)  
11. 7W-9805 [1] FILM-WARNING (SYNCHRONIZING)  
 

#SEBP48571734
 

4W-8003: MODULE GP-SYNCHRONIZING LIGHTS

4W-8003 MODULE GP-SYNCHRONIZING LIGHTS
S/N 9FG1-UP
REVERSE POWER RELAY SYSTEM
PART OF 7W-0700 PANEL AR-CONTROL
FOR USAGE REFER TO CHART @@@@@ 4W-8000@@@@@
AN ATTACHMENT
i00380342 SEBP4857
4W8003 MODULE GP-SYNCHRONIZING LIGHTS Parts scheme
  For full view, you need register

Parts for your C18 GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3N-9115 [1] STRIP-TERMINAL  
2. 7W-0484 [1] MARKER  
3. 4W-8746 [1] LENS-LAMP (RED)  
4. 3N-5719 [1] LAMP (24-VOLT)(CLEAR)  
5. 4W-8745 [1] HOUSING AS-LAMP  
6. 4W-8759 [1] PLATE-MODULE  
7. 4W-8743 [1] SOCKET-RELAY  
8. 3N-5714 [1] RELAY AS (24-VOLT)(SYNCHRONIZING PANEL)  
9. 4W-8757 [1] SWITCH-TOGGLE (SYNCHRONIZING LIGHTS MODULE)  
10. 5N-5507 [2] RESISTOR  
11. 4W-8754 [2] LENS-LAMP (CLEAR)  
12. 5N-3615 [2] LAMP (120-VOLT, 6-WATT)(CLEAR)  
13. 4W-8755 [2] HOUSING AS-LAMP  
14. 4W-8760 [1] BRACKET-MODULE  
15. 5N-5510 [1] RELAY-REVERSE POWER (SYNCHRONIZING PANEL)  
16. 7W-9804 [1] FILM-IDENTIFICATION (SYNCHRONIZING PANEL)  
17. 7W-9805 [1] FILM-WARNING (SYNCHRONIZING)  
 

#SEBP48571735
 

7C-3262: MODULE GP-SYNCHRONIZING LIGHTS

7C-3262 MODULE GP-SYNCHRONIZING LIGHTS
S/N 9FG1-UP
600 VOLT, AC
PART OF 7W-0700 PANEL AR-CONTROL
AN ATTACHMENT
i00404791 SEBP4857
7C3262 MODULE GP-SYNCHRONIZING LIGHTS Parts scheme
  For full view, you need register

Parts for your C18 GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3N-9115 [1] STRIP-TERMINAL  
2. 4W-8757 [1] SWITCH-TOGGLE (SYNCHRONIZING LIGHTS ON/OFF)  
3. 4W-8754 [2] LENS-LAMP (CLEAR)  
4. 5N-3615 [2] LAMP (120-VOLT, 6-WATT)  
5. 4W-8755 [2] HOUSING AS-LAMP  
6. 4W-8760 [1] BRACKET-MODULE  
7. 4W-8758 [1] PLATE-MODULE  
8. 7C-2945 [2] RESISTOR  
9. 7W-0484 [1] MARKER  
10. 7W-9804 [1] FILM-IDENTIFICATION (SYNCHRONIZING PANEL)  
11. 7W-9805 [1] FILM-WARNING (SYNCHRONIZING)  
 

#SEBP48571736
 

7C-3263: MODULE GP-SYNCHRONIZING LIGHTS

7C-3263 MODULE GP-SYNCHRONIZING LIGHTS
S/N 9FG1-UP
600 VOLT, AC
PART OF 7W-0700 PANEL AR-CONTROL
AN ATTACHMENT
i00404794 SEBP4857
7C3263 MODULE GP-SYNCHRONIZING LIGHTS Parts scheme
  For full view, you need register

Parts for your C18 GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3N-9115 [1] STRIP-TERMINAL  
2. 7W-0484 [1] MARKER  
3. 4W-8746 [1] LENS-LAMP (RED)  
4. 3N-5719 [1] LAMP (24-VOLT)  
5. 4W-8745 [1] HOUSING AS-LAMP  
6. 4W-8759 [1] PLATE-MODULE  
7. 4W-8743 [1] SOCKET-RELAY  
8. 3N-5714 [1] RELAY AS (24-VOLT)  
9. 4W-8757 [1] SWITCH-TOGGLE (SYNCHRONIZING LIGHTS ON/OFF)  
10. 7C-2945 [2] RESISTOR  
11. 4W-8754 [2] LENS-LAMP (CLEAR)  
12. 5N-3615 [2] LAMP (120-VOLT, 6-WATT)  
13. 4W-8755 [2] HOUSING AS-LAMP  
14. 4W-8760 [1] BRACKET-MODULE  
15. 7C-4378 [1] RELAY-REVERSE POWER  
16. 7W-9804 [1] FILM-IDENTIFICATION (SYNCHRONIZING PANEL)  
17. 7W-9805 [1] FILM-WARNING (SYNCHRONIZING)(SYNCHRONIZING)  
 

#SEBP48571737
 

4W-8008: MODULE GP-TIMER

4W-8008 MODULE GP-TIMER
S/N 9FG1-UP
COOL DOWN
PART OF 7W-0700 PANEL AR-CONTROL
FOR USAGE REFER TO CHART @@@@@ 4W-8000@@@@@
AN ATTACHMENT
i00380349 SEBP4857
4W8008 MODULE GP-TIMER Parts scheme
  For full view, you need register

Parts for your C18 GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-8792 [1] TIMER-COOL DOWN  
2. 3N-7817 [1] TRACK-MOUNTING  
 

#SEBP48571738
 

104-4704: MOUNTING GP-CONTROL PANEL

104-4704 MOUNTING GP-CONTROL PANEL -EMCP II
S/N 9FG1-UP; 7AJ1-UP
AN ATTACHMENT
i00473902 SEBP4857
1044704 MOUNTING GP-CONTROL PANEL Parts scheme
  For full view, you need register

Parts for your C18 GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-0372 B [1] LOCK PIN  
2. 6V-7646 [2] WASHER-HARD (7.2X25X2-MM THK)  
3. 7C-2675 [3] SEAL-BELLOWS  
4. 1B-0676 B [1] PIN  
5. 3E-9865 [2] LOCKNUT (1/4-20-THD)  
6. 3K-6060 [2] LOCKNUT (3/8-16-THD)  
7. 5S-3552 [2] PLATE  
8. 8T-4226 [4] WASHER-PLATED (10.5X45X3-MM THK)  
9. 8T-9377 [2] BOLT (3/8-16X2.25-IN)  
  B   USE AS REQUIRED
 

#SEBP48571739
 

239-6758: MOUNTING GP-CONTROL PANEL

239-6758 MOUNTING GP-CONTROL PANEL -TURRET
S/N EKW1-UP
AN ATTACHMENT
i01947533 SEBP4857
2396758 MOUNTING GP-CONTROL PANEL Parts scheme
  For full view, you need register

Parts for your C18 GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 236-0384 [1] COVER (TOP)  
  175-3265 [6] SCREW (8-16X0.63-IN)  
2. 236-0386 [1] BASE AS (TURRET)  
3. 236-0387 [1] PLATE-MOUNTING  
4. 236-0389 [1] PLATE (CABLE-INLET)  
5. 239-6766 [1] BRACKET AS  
5A. 203-5398 M [14] INSERT-THREADED (M5X0.8-THD)  
6. 254-3633 M [6] BOLT-FLANGE HEAD (M6X1X16-MM, SELF LOCKING)  
7. 8T-4127 M [14] SCREW-MACHINE (M5X0.8X20-MM)  
  M   METRIC PART
 

Information:

General Service Information
Electrostatic Discharge Awareness
INSTALLATION AND OPERATION LOAD SHARING MODULE
Chapter 1 - General Information
INSTALLATION AND OPERATION LOAD SHARING MODULE
Chapter 2 - Installation
INSTALLATION AND OPERATION LOAD SHARING MODULE
Chapter 3 - Setup and Calibration
INSTALLATION AND OPERATION LOAD SHARING MODULE
Chapter 4 - Theory Of Operation
INSTALLATION AND OPERATION LOAD SHARING MODULE
Chapter 5 - Troubleshooting
INSTALLATION AND OPERATION LOAD SHARING MODULE
Appendix A. - LSM Control Specifications
INSTALLATION AND OPERATION LOAD SHARING MODULE
Appendix B. - Guide for Handling and Protection of Electronic Controls, Printed Circuit Boards, & Modules
INSTALLATION AND OPERATION LOAD SHARING MODULE
Appendix C. - EMI Control in Electronic Governing Systems
INSTALLATION AND OPERATION LOAD SHARING MODULE
Engine News
Changes To Default Overcurrent Settings For EMCP II+ {4490}
1997/08/01
Updated 133-6350 EMCP II Generator Set Control Group Corrects Hourmeter Programming and Spare Fault Operation{4490}
1999/04/01
New Control Panel Films Show That SR4B Generators Are Not To Be Wired In The Delta Configuration{7557,7566}
1999/04/01
Correction to Testing and Adjusting Module, SENR5832, Electronic Modular Control Panel II+ (EMCPII+) for MUI Engines {4490}
2000/12/01
Correction to Testing and Adjusting, "Electronic Modular Control Panel II+ (EMCPII+) for MUI Engines" {4490}
2002/02/01
Switchgear Fusing Option {1417, 4491}
2008/12/01
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
Special Instruction
Generator Set Control (GSC) and AC Transformer Box (ATB) Replacement{4490}
Generator Set Control (GSC) and AC Transformer Box (ATB) Replacement{4490}
EMCP 3 to EMCP 4.1/4.2 Cat <SUP>&reg;</SUP> Retrofit Instructions{4490}
EMCP 3 to EMCP 4.1/4.2 Cat ® Retrofit Instructions{4490}
Procedure to Upgrade EMCP 2, EMCP 2+, EMCP 3.1, EMCP 3.2, and EMCP 3.3 to EMCP 4.3{4490}
Procedure to Upgrade EMCP 2, EMCP 2+, EMCP 3.1, EMCP 3.2, and EMCP 3.3 to EMCP 4.3{4490}
Procedure to Upgrade EMCP 1, EMCP 2, EMCP 2+, EMCP 3.1, EMCP 3.2, and EMCP 3.3 to EMCP 4.4 {4490}
Procedure to Upgrade EMCP 1, EMCP 2, EMCP 2+, EMCP 3.1, EMCP 3.2, and EMCP 3.3 to EMCP 4.4 {4490}
Procedure to Upgrade EMCP 1, EMCP 2, EMCP 2+, EMCP 3.1, EMCP 3.2, and EMCP 3.3 to EMCP 4.2 {4490, 7451}
Procedure to Upgrade EMCP 1, EMCP 2, EMCP 2+, EMCP 3.1, EMCP 3.2, and EMCP 3.3 to EMCP 4.2 {4490, 7451}
Instructions for Installing AssetIQ<SUP>TM</SUP> for Commercial Generator Set Systems on Caterpillar and non-Caterpillar Products {4450, 7490}
Instructions for Installing AssetIQTM for Commercial Generator Set Systems on Caterpillar and non-Caterpillar Products {4450, 7490}
Procedure to Upgrade EMCP 1, EMCP 2, EMCP 2+, EMCP 3.1, EMCP 3.2, and EMCP 3.3 to EMCP 4.2 {4490, 7610}
Procedure to Upgrade EMCP 1, EMCP 2, EMCP 2+, EMCP 3.1, EMCP 3.2, and EMCP 3.3 to EMCP 4.2 {4490, 7610}
Procedure to Upgrade EMCP 1, EMCP 2, EMCP 2+, EMCP 3.1, EMCP 3.2, and EMCP 3.3 to EMCP 4.2B {1408, 4490, 7418, 7426, 7451}
Procedure to Upgrade EMCP 1, EMCP 2, EMCP 2+, EMCP 3.1, EMCP 3.2, and EMCP 3.3 to EMCP 4.2B {1408, 4490, 7418, 7426, 7451}
Systems Operation
General Information
Generator Set Load Sharing Module
System Operation
Generator Set Load Sharing Module
Features
Product Link For Generator Sets
Parameters
Product Link For Generator Sets
Testing and Adjusting
Phasing - Check
Generator Set Load Sharing Module
Engine Does Not Share Load - Troubleshoot
Generator Set Load Sharing Module
Engine Will Not Operate in Parallel - Troubleshoot
Generator Set Load Sharing Module
Undesired Speed Decrease with Load Increase - Troubleshoot
Generator Set Load Sharing Module
Erratic Operation of Load Sharing Module - Troubleshoot
Generator Set Load Sharing Module
Load Signal Voltage Is Low - Troubleshoot
Generator Set Load Sharing Module
Load Signal Voltage Is High - Troubleshoot
Generator Set Load Sharing Module
Engine Does Not Properly Share Load - Troubleshoot
Generator Set Load Sharing Module
Wiring Diagrams
Generator Set Load Sharing Module
Droop - Adjust
Generator Set Load Sharing Module
Load Gain - Adjust
Generator Set Load Sharing Module
Phasing - Adjust
Generator Set Load Sharing Module
Installation Requirements
Generator Set Load Sharing Module
Service Magazine
Updated 133-6350 EMCP II Generator Set Control Group Corrects Hourmeter Programming And Spare Fault Operation {4490}
1998/11/23
Annunciator Film Kit Is Now Available for EMCP 4 On Cat Generator Sets {4490, 7400}
2010/11/29
Service Meter Adjustment Is Now Available in VisionLink<SUP>TM</SUP> {7478, 7606}
2014/08/20

Caterpillar Parts SIS Catalog C18 :

MODULE GP-SYNCHRONIZING LIGHTS
106-5169 MODULE GP-SYNCHRONIZING LIGHTS
148-5368 MODULE GP-RELAY DRIVER
MODULE GP-RELAY DRIVER
123-7450 MODULE GP-RELAY DRIVER
MODULE GP-CYCLE CRANKING
4W-8007 MODULE GP-CYCLE CRANKING
MODULE GP-AUXILIARY RELAY
4W-8009 MODULE GP-AUXILIARY RELAY
MODULE GP-ALARM
9Y-2907 MODULE GP-ALARM
MODULE GP-ALARM
9Y-2906 MODULE GP-ALARM
MODULE GP-ALARM
9W-3577 MODULE GP-ALARM
131-1969 MODULE GP-SYNCHRONIZING LIGHTS
131-1970 MODULE GP-SYNCHRONIZING LIGHTS
MODULE GP-SYNCHRONIZING LIGHTS
4W-8002 MODULE GP-SYNCHRONIZING LIGHTS
MODULE GP-SYNCHRONIZING LIGHTS
4W-8003 MODULE GP-SYNCHRONIZING LIGHTS
MODULE GP-SYNCHRONIZING LIGHTS
7C-3262 MODULE GP-SYNCHRONIZING LIGHTS
MODULE GP-SYNCHRONIZING LIGHTS
7C-3263 MODULE GP-SYNCHRONIZING LIGHTS
MODULE GP-TIMER
4W-8008 MODULE GP-TIMER
MOUNTING GP-CONTROL PANEL
104-4704 MOUNTING GP-CONTROL PANEL

Truck sale:

Caterpillar C18, Construction
89,000 USD 
Caterpillar C18, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
Caterpillar C18, Construction
34,700 
Caterpillar C18, Construction
- mobile generator sets
MOHAMED ABDULRAHMAN AL-BAHAR
United Arab Emirates
Caterpillar C18, Construction
34,800 
Caterpillar C18, Construction
- mobile generator sets
MOHAMED ABDULRAHMAN AL-BAHAR
United Arab Emirates
Caterpillar C18, Construction
32,850 
Caterpillar C18, Construction
- mobile generator sets
MOHAMED ABDULRAHMAN AL-BAHAR
United Arab Emirates
Caterpillar C18, Construction
36,800 
Caterpillar C18, Construction
- mobile generator sets
MOHAMED ABDULRAHMAN AL-BAHAR
United Arab Emirates
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.