259-5160 WIRING GP-PLATFORM S/N CJN1-UP PART OF 259-7193, 336-1229 OPERATOR AR 315D L EXCAVATOR

ELECTRICAL AND STARTING SYSTEM

WIRING GP

0. 259-5160 WIRING GP-
1. 306-8398 WIRING GP-
2. 238-1565 WIRING GP-
3. 259-5167 WIRING GP-
4. 275-6877 WIRING GP-
5. 283-2913 WIRING GP-

POWER TRAIN

DRIVE GP-FINAL

6. 165-5777 DRIVE GP-F
7. 197-7178 DRIVE GP-F
8. 199-4505 DRIVE GP-F
9. 210-3529 DRIVE GP-F
0. INFORMATION

EXCAVATOR 315D L EXCAVATOR CJN
315D L Excavator CJN00001-UP (MACHINE) POWERED BY C4.2 Engine SEBP4861 315D L CJN (2007)

ELECTRICAL AND STARTING SYSTEM

WIRING GP

291-7908 WIRING GP-OVERLOAD WARNING

328-0092 WIRING GP-OVERLOAD WARNING

259-5160 WIRING GP-PLATFORM

306-8398 WIRING GP-PLATFORM

238-1565 WIRING GP-QUICK COUPLER

259-5167 WIRING GP-QUICK COUPLER

#SEBP48610380

259-5160: WIRING GP-PLATFORM

WIRING GP-PLATFORM

259-5160 WIRING GP-PLATFORM
S/N CJN1-UP
PART OF 259-7193, 336-1229 OPERATOR AR

i02599637 SEBP4861

For full view, you need register

Parts for your 315D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3E-5169	[1]	GUARD-SWITCH
2.	3S-2093	[3]	STRAP-CABLE
3.	7G-1060	[1]	STRAP AS-GROUND
4.	7K-1181	[14]	STRAP-CABLE
5.	111-4836	[4]	CLIP
6.	111-4838	[2]	CLIP
7.	111-4839	[2]	STRAP
8.	116-0118	[12]	CLIP
9.	234-1122	[1]	COVER
10.	251-0299	[1]	HARNESS AS-SWITCH (SECONDARY SHUTDOWN)
	243-4505	[1]	RECEPTACLE AS-CONNECTOR (2-PIN)
11.	259-5297	[1]	HARNESS AS-PLATFORM
	102-8802	[6]	KIT-RECEPTACLE (2-PIN)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	3S-2093	[19]	STRAP-CABLE
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(20-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(45-CM)
	153-2620	[1]	PLUG AS-CONNECTOR (54-PIN, BLACK)
	163-6759	[1]	SEAL
	155-2270	[10]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	197-4385	[3]	DIODE
	230-4009	[3]	PLUG AS-CONNECTOR (12-PIN)
	230-4011	[3]	PLUG AS-CONNECTOR (2-PIN)
	230-5010	[3]	PLUG AS-CONNECTOR (6-PIN)
	239-7352	[1]	PLUG AS-CONNECTOR (6-PIN)
	243-4505	[1]	RECEPTACLE AS-CONNECTOR (2-PIN)
	243-4507	[1]	RECEPTACLE AS-CONNECTOR (4-PIN)
	243-4508	[4]	RECEPTACLE AS-CONNECTOR (6-PIN)
	243-4509	[1]	RECEPTACLE AS-CONNECTOR (8-PIN)
	243-4510	[2]	RECEPTACLE AS-CONNECTOR (12-PIN)
	247-2693	[1]	RECEPTACLE AS-CONNECTOR (6-PIN)
12.	275-6810	[1]	RECEPTACLE AS
	134-3297	[1]	SEAL
	163-6773	[1]	PLUG-SEAL
13.	095-0728 M	[2]	SCREW-MACHINE (M4X0.7X12-MM)
14.	096-6166	[2]	WASHER-HARD (4.5X9X1-MM THK)
15.	4D-1836	[1]	SWITCH-TOGGLE (SECONDARY SHUTDOWN)
16.	7X-2621 M	[6]	BOLT (M10X1.5X12-MM)
17.	8T-4121	[13]	WASHER-HARD (11X21X2.5-MM THK)
18.	8T-4137 M	[7]	BOLT (M10X1.5X20-MM)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP48610381

306-8398: WIRING GP-PLATFORM

WIRING GP-PLATFORM

306-8398 WIRING GP-PLATFORM -ACCUGRADE READY
S/N CJN1-UP
PART OF 301-2479, 330-8775 SPECIAL AR
AN ATTACHMENT

i02840809 SEBP4861

For full view, you need register

Parts for your 315D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[5]	STRAP-CABLE
2.	7K-1181	[3]	STRAP-CABLE
3.	204-1611	[1]	STRAP (DUAL)
4.	299-2702	[1]	HARNESS AS-SOLENOID

#SEBP48610382

238-1565: WIRING GP-QUICK COUPLER

WIRING GP-QUICK COUPLER

238-1565 WIRING GP-QUICK COUPLER
S/N CJN1-UP
PART OF 460-5487 CONTROL AR-COUPLER, 279-5323, 345-3321 LINES GP-COUPLER
AN ATTACHMENT

i02412954 SEBP4861

2381565 WIRING GP-QUICK COUPLER Parts scheme

For full view, you need register

Parts for your 315D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[7]	STRAP-CABLE
2.	7K-1181	[16]	STRAP-CABLE
3.	238-1588	[1]	HARNESS AS-SOLENOID (QUICK COUPLER DISENGAGE)
	230-4011	[1]	PLUG AS-CONNECTOR (2-PIN)
	243-4505	[1]	RECEPTACLE AS-CONNECTOR (2-PIN)

#SEBP48610383

259-5167: WIRING GP-QUICK COUPLER

WIRING GP-QUICK COUPLER

259-5167 WIRING GP-QUICK COUPLER
S/N CJN1-UP
PART OF 262-3249, 344-4407 CONTROL AR-COUPLER
AN ATTACHMENT

i02765865 SEBP4861

2595167 WIRING GP-QUICK COUPLER Parts scheme

For full view, you need register

Parts for your 315D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	267-7697	[1]	HARNESS AS-SOLENOID
	230-4011	[1]	PLUG AS-CONNECTOR (2-PIN)
	264-7029	[1]	SEAL-CONNECTOR
	243-4505	[1]	RECEPTACLE AS-CONNECTOR (2-PIN)
2.	3S-2093	[8]	STRAP-CABLE
3.	7K-1181	[9]	STRAP-CABLE

#SEBP48610384

275-6877: WIRING GP-QUICK COUPLER

WIRING GP-QUICK COUPLER

275-6877 WIRING GP-QUICK COUPLER
S/N CJN1-UP
PART OF 268-7253 CONTROL AR-COUPLER
AN ATTACHMENT

i02790503 SEBP4861

2756877 WIRING GP-QUICK COUPLER Parts scheme

For full view, you need register

Parts for your 315D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[11]	STRAP-CABLE
2.	7I-2673	[3]	STRAP-CABLE
3.	7K-1181	[14]	STRAP-CABLE
4.	116-0118	[1]	CLIP
5.	299-2932	[1]	HARNESS AS-SOLENOID
	243-4507	[1]	RECEPTACLE AS-CONNECTOR (4-PIN)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	155-2270	[3]	KIT-CONNECTING PLUG (2-PIN)
			(EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
6.	4P-7428	[1]	CLIP
7.	4P-7581	[2]	CLIP (LADDER)
8.	7X-2621 M	[2]	BOLT (M10X1.5X12-MM)
9.	8T-4121	[2]	WASHER-HARD (11X21X2.5-MM THK)
	M		METRIC PART

#SEBP48610385

283-2913: WIRING GP-RADIO

WIRING GP-RADIO

283-2913 WIRING GP-RADIO
S/N CJN1-UP
CANNOT BE USED WITH @@@@@268-7253@@@@@, @@@@@231-1768@@@@@, @@@@@259-7557@@@@@, @@@@@343-1080@@@@@
AN ATTACHMENT

i02558511 SEBP4861

For full view, you need register

Parts for your 315D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[11]	STRAP-CABLE
2.	4I-7889	[1]	SPACER (11X25X45-MM THK)
3.	7K-1181	[10]	STRAP-CABLE
4.	116-0118	[1]	CLIP
5.	149-5050	[4]	RELAY (24-VOLT)(SPEAKERS)
6.	170-2512 Y	[1]	SWITCH GP-TOGGLE (SPEAKER)
7.	267-7676	[1]	BRACKET AS
8.	267-7695	[1]	BRACKET AS
9.	283-2914	[1]	HARNESS AS-RADIO
	8T-8737	[9]	PLUG-SEAL
	8T-8730	[21]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	9W-0844	[6]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	149-5069	[8]	TERMINAL-BLADE (14-GA TO 20-GA)
	149-5070	[12]	TERMINAL-BLADE (16-GA TO 20-GA)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(20-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM)
	8T-8729	[6]	PIN-CONNECTOR (16-GA TO 18-GA)
	9W-0852	[2]	PIN-CONNECTOR (14-GA TO 16-GA)
	3S-2093	[25]	STRAP-CABLE
	149-5051	[4]	CONNECTOR-RECEPTACLE
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	230-5010	[1]	PLUG AS-CONNECTOR (6-PIN)
	264-7032	[1]	SEAL-CONNECTOR
	231-2295	[2]	PLUG AS-CONNECTOR (8-PIN)
			(EACH INCLUDES)
	264-7033	[1]	SEAL-CONNECTOR
	243-4509	[2]	RECEPTACLE AS-CONNECTOR (8-PIN)
10.	283-2984	[1]	COVER
11.	324-5770	[1]	CONVERTER-POWER (24-VOLT TO 12-VOLT)
12.	8T-4171 M	[4]	BOLT (M6X1X12-MM)
13.	8T-5005 M	[1]	BOLT (M10X1.5X70-MM)
14.	9X-2042 M	[7]	SCREW-TRUSS HEAD (M6X1X12-MM)
15.	9X-8256	[4]	WASHER (6.6X12X2-MM THK)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP48610386

165-5777: DRIVE GP-FINAL

DRIVE GP-FINAL

165-5777 DRIVE GP-FINAL -WITH MOTOR
S/N CJN1-2748
PART OF 353-0509 DRIVE GP-FINAL

i01433060 SEBP4861

For full view, you need register

Parts for your 315D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	185-6952 Y	[1]	MOTOR & MTG GP-TRAVEL
2.	210-3529 Y	[1]	DRIVE GP-FINAL
	Y		SEPARATE ILLUSTRATION

#SEBP48610387

197-7178: DRIVE GP-FINAL

DRIVE GP-FINAL

197-7178 DRIVE GP-FINAL -WITH MOTOR
S/N CJN1-UP
PART OF 199-4505 DRIVE GP-FINAL
AN ATTACHMENT

i01828307 SEBP4861

For full view, you need register

Parts for your 315D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	210-3529 Y	[1]	DRIVE GP-FINAL
2.	197-7179 Y	[1]	MOTOR & MTG GP-TRAVEL
	Y		SEPARATE ILLUSTRATION

#SEBP48610388

199-4505: DRIVE GP-FINAL

DRIVE GP-FINAL

199-4505 DRIVE GP-FINAL -WITH MOTOR
S/N CJN1-UP
PART OF 283-8896 DRIVE GP-FINAL
AN ATTACHMENT

i04354769 SEBP4861

For full view, you need register

Parts for your 315D L EXCAVATOR:

CATERPILLAR SIS

Part No	Qty	Parts name
197-7178 Y	[2]	DRIVE GP-FINAL (WITH MOTOR)
		-OR-
350-0451 Y	[2]	DRIVE GP-FINAL (WITH MOTOR)
Y		SEPARATE ILLUSTRATION

#SEBP48610389

210-3529: DRIVE GP-FINAL

DRIVE GP-FINAL

210-3529 DRIVE GP-FINAL -WITHOUT MOTOR
S/N CJN1-2748
PART OF 165-5777, 197-7178 DRIVE GP-FINAL
ALSO AN ATTACHMENT

i01828455 SEBP4861

For full view, you need register

Parts for your 315D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	165-5785	[1]	SPACER (40X60.9X1-MM THK)
2.	096-1773 B	[1]	SHIM (0.15-MM THK)
	096-1774 B	[1]	SHIM (0.3-MM THK)
	096-1775 B	[1]	SHIM (0.4-MM THK)
	096-1776 B	[1]	SHIM (0.5-MM THK)
	096-1777 B	[1]	SHIM (0.6-MM THK)
	096-1778 B	[1]	SHIM (0.7-MM THK)
	096-1779 B	[1]	SHIM (0.8-MM THK)
	096-1780 B	[1]	SHIM (1-MM THK)
	096-1781 B	[1]	SHIM (1.6-MM THK)
11.	227-6034 M	[16]	BOLT-FLANGE HEAD (M16X2X60-MM)
12.	165-5786	[3]	SHAFT
13.	094-1542	[6]	BEARING-ROLLER
14.	165-5787	[3]	GEAR-PLANETARY
15.	094-1528	[6]	WASHER (53X84X1-MM THK)
16.	095-0891	[6]	PIN-SPRING
17.	165-5788	[3]	GEAR-PLANETARY
18.	094-0616	[3]	BEARING AS-ROLLER
19.	3E-2338	[2]	PLUG-PIPE
20.	7M-8485	[2]	SEAL-O-RING
21.	165-5790	[1]	COVER
22.	7Y-0225	[3]	SHAFT-PLANETARY
23.	094-0611	[6]	WASHER (47.3X76X1-MM THK)
24.	094-0580	[1]	PLATE (10-MM THK)
25.	165-5792	[1]	GEAR-SUN
26.	165-5793	[1]	GEAR-SUN
27.	165-5794	[1]	SPACER (72X101X7-MM THK)
28.	165-5795	[1]	CARRIER
29.	8T-7929 M	[16]	BOLT (M12X1.75X180-MM)
30.	8T-4223	[16]	WASHER-HARD (13.5X25.5X3-MM THK)
31.	095-1299	[3]	DOWEL
32.	165-3892	[1]	GEAR-RING
33.	165-5796	[1]	CARRIER
34.	165-5797	[1]	GEAR
35.	165-5800	[1]	WASHER (241X282X3-MM THK)
36.	210-3530	[1]	HOUSING
37.	114-1539	[4]	PIN-DOWEL
38.	168-8451	[2]	BALL BEARING
39.	210-3531	[1]	HOUSING-MOTOR
40.	114-1497	[1]	SEAL GP-DUO-CONE
41.	1U-8846 B		SEALANT-GASKET
	B		USE AS REQUIRED
	M		METRIC PART

Information:

ELECTRICAL AND STARTING SYSTEM

WIRING GP

Engine News

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13

Operation and Maintenance Manual

Battery or Battery Cable - Inspect/Replace
315D and 318D Excavators

Battery - Recycle
315D and 318D Excavators

Battery Disconnect Switch
315D and 318D Excavators

Power Receptacle - If Equipped
315D and 318D Excavators

Fuses - Replace
315D and 318D Excavators

Special Instruction

Installation of 183-9371 Coupler Lines Gp (KIT, WEDGE LOCK){1408, 5000, 5051, 5057, 6129, 7000, 7332}
Installation of 183-9371 Coupler Lines Gp (KIT, WEDGE LOCK){1408, 5000, 5051, 5057, 6129, 7000, 7332}

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Installation of 279-5323 Coupler Lines Gp (KIT, PIN GRABBER){1408, 5057, 5479, 6129, 7000, 7332}
Installation of 279-5323 Coupler Lines Gp (KIT, PIN GRABBER){1408, 5057, 5479, 6129, 7000, 7332}

Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}

Field Installation of Auxiliary Hydraulic Control Arrangements for 315D and 319D Excavators{1408, 1435, 5051, 5057, 5059, 5462, 5705, 7405, 7553, 7557}
Field Installation of Auxiliary Hydraulic Control Arrangements for 315D and 319D Excavators{1408, 1435, 5051, 5057, 5059, 5462, 5705, 7405, 7553, 7557}

Installation Procedure for Auxiliary Ready Hydraulic Circuit for 315D Excavators{1408, 5051, 5057, 5059}
Installation Procedure for Auxiliary Ready Hydraulic Circuit for 315D Excavators{1408, 5051, 5057, 5059}

Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}

Troubleshooting Guide for 161-3128 Relay on Certain Excavators{1408, 7301}
Troubleshooting Guide for 161-3128 Relay on Certain Excavators{1408, 7301}

Installation of the 270-6106 Auxiliary Control Ar {1408, 1435, 7405, 7553, 7557}
Installation of the 270-6106 Auxiliary Control Ar {1408, 1435, 7405, 7553, 7557}

Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}

Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}

Procedure for Installing the 373-8980 Console Harness As on Certain Excavators{1408, 5258}
Procedure for Installing the 373-8980 Console Harness As on Certain Excavators{1408, 5258}

DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}

Installation of the 456-4111 Quick Coupler Control Ar on Certain Hydraulic Excavators{1408, 5057, 6129, 7332, 7405, 7557}
Installation of the 456-4111 Quick Coupler Control Ar on Certain Hydraulic Excavators{1408, 5057, 6129, 7332, 7405, 7557}

Installation of the 238-1565 Quick Coupler Wiring Gp on Certain Hydraulic Excavators{1408, 6129}
Installation of the 238-1565 Quick Coupler Wiring Gp on Certain Hydraulic Excavators{1408, 6129}

Master Guide for Field Installation of 454-9922 Auxiliary Control Ar on Certain Hydraulic Excavators{1408, 5057, 5059, 5705, 7405, 7557}
Master Guide for Field Installation of 454-9922 Auxiliary Control Ar on Certain Hydraulic Excavators{1408, 5057, 5059, 5705, 7405, 7557}

Installation Procedure for 259-5168 Auxiliary Control Wiring Gp of Certain Hydraulic Excavators{1408}
Installation Procedure for 259-5168 Auxiliary Control Wiring Gp of Certain Hydraulic Excavators{1408}

Rework Procedure for Heater Cable Assembly on Certain 311D Through 319D Excavators{1090}
Rework Procedure for Heater Cable Assembly on Certain 311D Through 319D Excavators{1090}

Installation Procedure for the 460-5487 Coupler Control Arrangement for Certain and Hydraulic Excavators{1408, 5057, 6129, 7332, 7405, 7557}
Installation Procedure for the 460-5487 Coupler Control Arrangement for Certain and Hydraulic Excavators{1408, 5057, 6129, 7332, 7405, 7557}

Procedure to Troubleshoot the Upper Window Wiper Relay on Certain 311D through 349D, E Series, and F Series Excavators{1408, 7305}
Procedure to Troubleshoot the Upper Window Wiper Relay on Certain 311D through 349D, E Series, and F Series Excavators{1408, 7305}

Specifications

Wiring (Battery) - Semi-cold Weather
315D and 318D Excavators Machine System Specifications

Wiring (Battery)
315D and 318D Excavators Machine System Specifications

Tool Operating Manual

Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Systems Operation

Relays
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Tool Control System

Senders
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Tool Control System

Sensors
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Tool Control System

Switches
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Machine Electronic Control System

Sensors
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Machine Electronic Control System

Relays
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Machine Electronic Control System

Switches
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Tool Control System

Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Caterpillar Machines

Testing and Adjusting

Electric Starting System - Test
C4.2 and C6.4 Engines for Caterpillar Built Machines

Electrical Connector - Inspect
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Machine Electronic Control System

Wiring Harness (Open Circuit) - Test
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Machine Electronic Control System

Overload Warning - Set - If Equipped
315D and 318D Excavators Hydraulic System

Electrical Connector - Inspect
AccuGrade^® Site and Laser Reference System For Excavators

Wiring Harness (Open Circuit) - Test
AccuGrade^® Site and Laser Reference System For Excavators

Wiring Harness (Short Circuit) - Test
AccuGrade^® Site and Laser Reference System For Excavators

Wiring Harness (Short Circuit) - Test
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Machine Electronic Control System

Electrical Connector - Inspect
AccuGrade^® GPS / Single UTS / Site and Laser Reference v11 for Excavators

Wiring Harness (Open Circuit) - Test
AccuGrade^® GPS / Single UTS / Site and Laser Reference v11 for Excavators

Wiring Harness (Short Circuit) - Test
AccuGrade^® GPS / Single UTS / Site and Laser Reference v11 for Excavators

Connector Contact Description
AccuGrade^® GPS / Single UTS / Site and Laser Reference v11 for Excavators

System Schematic
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Machine Electronic Control System

Electrical Connector - Inspect
Product Link - PL522/523

Wiring Harness (Open Circuit) - Test
Product Link - PL522/523

Wiring Harness (Short Circuit) - Test
Product Link - PL522/523

Electrical Connector - Inspect
Product Link 121S/300

Wiring Harness (Open Circuit) - Test
Product Link 121S/300

Wiring Harness (Short Circuit) - Test
Product Link 121S/300

System Schematic
Machine Security System (MSS3i) Integrated

Troubleshooting

MID 039 - CID 0096 - FMI 05
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Machine Electronic Control System

MID 039 - CID 0096 - FMI 04
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Machine Electronic Control System

MID 039 - CID 0586 - FMI 05
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Machine Electronic Control System

MID 039 - CID 0586 - FMI 12
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Machine Electronic Control System

MID 039 - CID 0588 - FMI 09
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Machine Electronic Control System

MID 039 - CID 2280 - FMI 03
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Machine Electronic Control System

MID 039 - CID 0600 - FMI 04
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Machine Electronic Control System

Electrical Connectors
C4.2 and C6.4 Engines for Caterpillar Built Machines

Electrical Connectors - Inspect
C4.2 and C6.4 Engines for Caterpillar Built Machines

MID 039 - CID 0110 - FMI 04
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Machine Electronic Control System

MID 039 - CID 0110 - FMI 09
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Machine Electronic Control System

Electrical Power Supply
AccuGrade^® Site and Laser Reference System For Excavators

MID 039 - CID 1178 - FMI 03
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Machine Electronic Control System

MID 039 - CID 1178 - FMI 04
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Machine Electronic Control System

MID 039 - CID 1178 - FMI 08
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Machine Electronic Control System

CAN Data Link
AccuGrade^® Site and Laser Reference System For Excavators

MID 039 - CID 0588 - FMI 12
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Machine Electronic Control System

Electrical Component and Connector Locations
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Machine Electronic Control System

CAN Data Link - Test
AccuGrade^® GPS / Single UTS / Site and Laser Reference v11 for Excavators

MID 039 - CID 2300 - FMI 09
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Machine Electronic Control System

MID 122 - CID 0269 - FMI 03
Product Link 121S/300

MID 122 - CID 0269 - FMI 04
Product Link 121S/300

Service Magazine

Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04

Investigation of the Liquid Level Switch on the Engine Oil Pan and on the Hydraulic Tank for Excavators {1302, 1408, 5056, 5068, 7422}
2009/08/31

Troubleshooting the Rotary Switch Assembly for the Engine Speed {1408, 7332}
2008/08/18

Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17

New Software and a New Rotary Switch Improve the Reliability of the Engine Speed Dial on Excavators {1408, 7332, 7610, 7620}
2009/04/13

Inspection Procedure for Switch Panel on Certain Excavators {1408, 7301, 7305, 7306, 7310}
2009/03/09

A New Harness Assembly for the Right Hand Console is Now Available {1408}
2009/06/01