259-0842 CYLINDER & SEAL GP-STICK S/N CJN1-UP PART OF 259-0841 CYLINDER & LINES GP-STICK AN ATTACHMENT 315D L

259-0842: CYLINDER & SEAL GP-STICK

259-0842 CYLINDER & SEAL GP-STICK
S/N CJN1-UP
PART OF 259-0841 CYLINDER & LINES GP-STICK
AN ATTACHMENT

Parts for your 315D L EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	3B-8489	[1]	FITTING-GREASE (1/8-27 PTF)
2.	235-7679	[4]	SEAL-LIP TYPE
3.	259-0843 Y	[1]	CYLINDER GP-STICK
4.	8T-6763	[1]	PLUG-PIPE (1/4-18-THD)
	Y		SEPARATE ILLUSTRATION

289-8102: CYLINDER & SEAL GP-STICK

CYLINDER & SEAL GP-STICK

289-8102 CYLINDER & SEAL GP-STICK
S/N CJN1-UP
PART OF 289-8101 CYLINDER & LINES GP-STICK
AN ATTACHMENT

Parts for your 315D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3B-8489	[1]	FITTING-GREASE (1/8-27 PTF)
2.	235-7679	[4]	SEAL-LIP TYPE
3.	289-8103 Y	[1]	CYLINDER GP-STICK
4.	8T-6763	[1]	PLUG-PIPE (1/4-18-THD)
	Y		SEPARATE ILLUSTRATION

322-8745: CYLINDER & SEAL GP-STICK

CYLINDER & SEAL GP-STICK

322-8745 CYLINDER & SEAL GP-STICK
S/N CJN1-UP
PART OF 289-8101 CYLINDER & LINES GP-STICK
AN ATTACHMENT

Parts for your 315D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3B-8489	[1]	FITTING-GREASE (1/8-27 PTF)
2.	235-7679	[4]	SEAL-LIP TYPE
3.	322-8746 Y	[1]	CYLINDER GP-STICK
4.	8T-6763	[1]	PLUG-PIPE (1/4-18-THD)
	Y		SEPARATE ILLUSTRATION

385-2915: CYLINDER & SEAL GP-STICK

CYLINDER & SEAL GP-STICK

385-2915 CYLINDER & SEAL GP-STICK
S/N CJN1-UP
120-MM (4.7-IN) BORE X 1331-MM (52.4-IN) STROKE
PART OF 381-8970 CYLINDER & LINES GP-STICK
AN ATTACHMENT

Parts for your 315D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	385-2862	[1]	CYLINDER AS-STICK
1A.	241-7231	[1]	BUSHING
2.	385-2863	[1]	ROD AS
2A.	241-7231	[1]	BUSHING
3.	385-2929	[1]	HEAD
4.	385-2934	[1]	BUSHING
5.	385-2933	[1]	RING-RETAINING
6.	385-2927	[1]	STOP
7.	385-2923	[1]	PISTON
8.	385-2939	[1]	RING-SNAP
9.	422-9122	[1]	BALL
10.	385-2891	[1]	SETSCREW-SOCKET
11.	385-2910	[1]	RING-RETAINING
12.	385-2920	[1]	RING-RETAINING
13.	385-2909	[1]	STOP
14.	095-9806 M	[12]	BOLT-SOCKET HEAD (M16X2X80-MM)
15.	235-7679	[4]	SEAL-LIP TYPE
16.	8T-6763	[1]	PLUG-PIPE (1/4-18-THD)
17.	3B-8489	[1]	FITTING-GREASE (1/8-27 PTF)
18.	416-1312 J	[1]	SEAL-WIPER
19.	416-1313 J	[1]	SEAL-U-CUP
20.	416-1315 J	[1]	SEAL-BUFFER
21.	416-1314 J	[1]	RING-BACKUP
22.	416-1288 J	[1]	SEAL-O-RING
23.	416-1289 J	[1]	RING-BACKUP
24.	416-1291 J	[1]	SEAL AS
25.	416-1290 J	[2]	RING-WEAR
26.	416-1292 J	[2]	RING-WEAR
27.	416-1316 J	[1]	RING-SEAL
28.	416-1294 J	[1]	RING-SEAL

			AVAILABLE REPAIR KIT(S):
	385-2942 J	[1]	KIT-SEAL (STICK CYLINDER)(STICK CYLINDER)
	J		KIT MARKED J SERVICES PART(S) MARKED J
	M		METRIC PART

539-7995: CYLINDER & SEAL GP-STICK

CYLINDER & SEAL GP-STICK

539-7995 CYLINDER & SEAL GP-STICK
S/N CJN1-UP
120-MM (4.72-IN) BORE X 1331-MM (52.4-IN) STROKE
PART OF 381-8970 CYLINDER & LINES GP-STICK
AN ATTACHMENT

Parts for your 315D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	539-7996	[1]	CYLINDER AS
1A.	241-7231	[1]	BUSHING
2.	385-2863	[1]	ROD AS
2A.	241-7231	[1]	BUSHING
3.	385-2929	[1]	HEAD
4.	385-2934	[1]	BUSHING
5.	385-2933	[1]	RING-RETAINING
6.	385-2927	[1]	STOP
7.	385-2923	[1]	PISTON
8.	385-2939	[1]	RING-SNAP
9.	422-9122	[1]	BALL
10.	385-2891	[1]	SETSCREW-SOCKET
11.	385-2910	[1]	RING-RETAINING
12.	385-2920	[1]	RING-RETAINING
13.	385-2909	[1]	STOP
14.	095-9806 M	[12]	BOLT-SOCKET HEAD (M16X2X80-MM)
15.	235-7679	[4]	SEAL-LIP TYPE
16.	8T-6763	[1]	PLUG-PIPE (1/4-18-THD)
17.	3B-8489	[1]	FITTING-GREASE (1/8-27 PTF)
18.	416-1312 H	[1]	SEAL-WIPER
19.	416-1313 H	[1]	SEAL-U-CUP
20.	416-1315 H	[1]	SEAL-BUFFER
21.	416-1314 H	[1]	RING-BACKUP
22.	416-1288 H	[1]	SEAL-O-RING
23.	416-1289 H	[1]	RING-BACKUP
24.	416-1291 H	[1]	SEAL AS
25.	416-1290 H	[2]	RING-WEAR
26.	416-1292 H	[2]	RING-WEAR
27.	416-1316 H	[1]	RING-SEAL
28.	416-1294 H	[1]	RING-SEAL

			AVAILABLE REPAIR KIT(S):
	385-2942 H	[1]	KIT-SEAL (STICK CYLINDER)
	H		KIT MARKED H SERVICES PART(S) MARKED H
	M		METRIC PART

259-0840: CYLINDER GP-BOOM

CYLINDER GP-BOOM

259-0840 CYLINDER GP-BOOM
S/N CJN1-UP
110-MM (4.3-IN) BORE X 1193-MM (47-IN) STROKE
PART OF 259-0839 CYLINDER & SEAL GP-BOOM
AN ATTACHMENT

Parts for your 315D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9X-7301 J	[1]	SEAL AS
2.	143-8031 J	[1]	RING
3.	143-8150 M	[1]	LOCKNUT-SPECIAL
4.	147-5818	[1]	PISTON
5.	150-5814	[1]	STOP
6.	266-7849	[1]	CYLINDER AS
6A.	260-2526	[1]	BUSHING
7.	289-8099	[1]	ROD AS
7A.	241-7380	[1]	BUSHING
8.	266-7859 J	[1]	RING-SEAL
9.	096-8139	[1]	RING-RETAINING
10.	129-8068	[1]	HEAD
11.	143-8034 J	[1]	RING
12.	147-5819 J	[1]	RING
13.	165-9285 J	[1]	SEAL-LIP TYPE
14.	170-9843 J	[1]	SEAL-BUFFER
15.	170-9859 J	[1]	SEAL-U-CUP
16.	095-1716 J	[1]	SEAL-O-RING
17.	096-1054 J	[1]	RING-BACKUP
18.	105-7360 J	[1]	RING-BACKUP
19.	114-0755	[1]	BUSHING
20.	7Y-5216 M	[8]	BOLT-SOCKET HEAD (M20X2.5X80-MM)

			AVAILABLE REPAIR KIT(S):
	266-7861 J	[1]	KIT-SEAL (BOOM CYLINDER)(BOOM)
	J		KIT MARKED J SERVICES PART(S) MARKED J
	M		METRIC PART

289-8093: CYLINDER GP-BOOM

CYLINDER GP-BOOM

289-8093 CYLINDER GP-BOOM
S/N CJN1-UP
110-MM (4.3-IN) BORE X 1193-MM (47-IN) STROKE
PART OF 289-8092 CYLINDER & SEAL GP-BOOM
AN ATTACHMENT

Parts for your 315D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9X-7301 J	[1]	SEAL AS
2.	143-8031 J	[1]	RING
3.	143-8150 M	[1]	LOCKNUT-SPECIAL
4.	147-5818	[1]	PISTON
5.	150-5814	[1]	STOP
6.	266-7859 J	[1]	RING-SEAL
7.	289-8094	[1]	CYLINDER AS
7A.	260-2526	[1]	BUSHING
8.	289-8099	[1]	ROD AS
8A.	241-7380	[1]	BUSHING
9.	096-8139	[1]	RING-RETAINING
10.	129-8068	[1]	HEAD
11.	143-8034 J	[1]	RING
12.	147-5819 J	[1]	RING
13.	165-9285 J	[1]	SEAL-LIP TYPE
14.	170-9843 J	[1]	SEAL-BUFFER
15.	170-9859 J	[1]	SEAL-U-CUP
16.	095-1716 J	[1]	SEAL-O-RING
17.	096-1054 J	[1]	RING-BACKUP
18.	105-7360 J	[1]	RING-BACKUP
19.	114-0755	[1]	BUSHING
20.	7Y-5216 M	[8]	BOLT-SOCKET HEAD (M20X2.5X80-MM)

			AVAILABLE REPAIR KIT(S):
	266-7861 J	[1]	KIT-SEAL (BOOM CYLINDER)
	J		KIT MARKED J SERVICES PART(S) MARKED J
	M		METRIC PART

259-0846: CYLINDER GP-BUCKET

CYLINDER GP-BUCKET

259-0846 CYLINDER GP-BUCKET
S/N CJN1-UP
100-MM (3.9-IN) BORE X 1048-MM (41.3-IN) STROKE
PART OF 259-0845 CYLINDER & SEAL GP-BUCKET
AN ATTACHMENT

Parts for your 315D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9X-7298 J	[1]	SEAL AS
2.	093-1519 J	[1]	RING-BACKUP
3.	099-5400	[1]	RING-RETAINING
4.	133-6677	[1]	HEAD
5.	133-6686 M	[1]	LOCKNUT-SPECIAL
6.	133-6716 J	[1]	RING-BACKUP
7.	143-8024 J	[1]	RING
8.	143-8025 J	[1]	RING
9.	143-8033 J	[1]	RING
10.	158-8924	[1]	PISTON
11.	165-9283 J	[1]	SEAL-LIP TYPE
12.	170-9841 J	[1]	SEAL-BUFFER
13.	170-9857 J	[1]	SEAL-U-CUP
14.	266-7875	[1]	CYLINDER AS
14A.	260-2528	[1]	BUSHING
15.	266-7879	[1]	ROD AS
15A.	240-2912	[1]	BUSHING
16.	095-1714 J	[1]	SEAL-O-RING
17.	114-0753	[1]	BUSHING
18.	7Y-5216 M	[8]	BOLT-SOCKET HEAD (M20X2.5X80-MM)

			AVAILABLE REPAIR KIT(S):
	179-9638 J	[1]	KIT-SEAL (BUCKET CYLINDER)
	J		KIT MARKED J SERVICES PART(S) MARKED J
	M		METRIC PART

259-0916: CYLINDER GP-BUCKET

CYLINDER GP-BUCKET

259-0916 CYLINDER GP-BUCKET
S/N CJN1-UP
110-MM (4.3-IN) BORE X 1048-MM (41.3-IN) STROKE
PART OF 259-0915 CYLINDER & SEAL GP-BUCKET
AN ATTACHMENT

Parts for your 315D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9X-7301 J	[1]	SEAL AS
2.	143-8031 J	[1]	RING
3.	143-8150 M	[1]	LOCKNUT-SPECIAL
4.	147-5818	[1]	PISTON
5.	266-7813	[1]	CYLINDER AS
5A.	260-2530	[1]	BUSHING
6.	266-7885	[1]	ROD & BEARING AS
6A.	240-2913	[1]	BUSHING
7.	096-8139	[1]	RING-RETAINING
8.	129-8068	[1]	HEAD
9.	143-8034 J	[1]	RING
10.	147-5819 J	[1]	RING
11.	165-9285 J	[1]	SEAL-LIP TYPE
12.	170-9843 J	[1]	SEAL-BUFFER
13.	170-9859 J	[1]	SEAL-U-CUP
14.	095-1716 J	[1]	SEAL-O-RING
15.	096-1054 J	[1]	RING-BACKUP
16.	105-7360 J	[1]	RING-BACKUP
17.	114-0755	[1]	BUSHING
18.	7Y-5216 M	[8]	BOLT-SOCKET HEAD (M20X2.5X80-MM)

			AVAILABLE REPAIR KIT(S):
	179-9625 J	[1]	KIT-SEAL (BUCKET CYLINDER)
	J		KIT MARKED J SERVICES PART(S) MARKED J
	M		METRIC PART

281-8979: CYLINDER GP-BUCKET

CYLINDER GP-BUCKET

281-8979 CYLINDER GP-BUCKET
S/N CJN1-UP
100-MM (3.9-IN) BORE X 1048-MM (41.3-IN) STROKE
PART OF 302-1730 CYLINDER & SEAL GP-BUCKET
AN ATTACHMENT

Parts for your 315D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3E-3377	[1]	WEDGE-RECEPTACLE LOCK (4-PIN)
2.	9X-7298 J	[1]	SEAL AS
3.	099-5400	[1]	RING-RETAINING
4.	102-2244	[1]	GROMMET
5.	133-6677	[1]	HEAD
6.	133-6716 J	[1]	RING-BACKUP
7.	170-9857 J	[1]	SEAL-U-CUP
8.	212-0907	[1]	PLATE-CONNECTOR
9.	217-3312	[1]	MAGNET
10.	217-8763	[1]	COVER-PROTECTION
11.	246-9113	[1]	RETAINER
12.	281-8980	[1]	CYLINDER AS
12A.	260-2528	[1]	BUSHING
13.	281-8984	[1]	ROD AS
13A.	240-2912	[1]	BUSHING
14.	281-8986	[1]	PISTON
15.	281-8989	[1]	SENSOR GP-POSITION (BUCKET)
	9X-3401	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
16.	093-1519 J	[1]	RING-BACKUP
17.	095-1267 M	[2]	SETSCREW-SOCKET (M10X1.5-THD)
18.	095-1714 J	[1]	SEAL-O-RING
19.	114-0753	[1]	BUSHING
20.	143-8024 J	[1]	RING
21.	143-8025 J	[1]	RING
22.	143-8033 J	[1]	RING
23.	165-9283 J	[1]	SEAL-LIP TYPE
24.	170-9841 J	[1]	SEAL-BUFFER
25.	188-2199	[1]	SEAL-O-RING
26.	215-1942	[1]	RING-BACKUP
27.	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
28.	3V-2431	[2]	WASHER (10.2X16X2-MM THK)
29.	6V-8223 M	[1]	SETSCREW-SOCKET (M10X1.5X16-MM)
30.	7Y-5216 M	[8]	BOLT-SOCKET HEAD (M20X2.5X80-MM)
31.	8T-8737	[1]	PLUG-SEAL
32.	8T-8894 M	[2]	BOLT-SOCKET HEAD (M10X1.5X20-MM)
33.	9X-1386 E		SLEEVE (10-CM EACH)

			AVAILABLE REPAIR KIT(S):
	179-9638 J	[1]	KIT-SEAL (BUCKET CYLINDER)
	E		ORDER BY THE CENTIMETER
	J		KIT MARKED J SERVICES PART(S) MARKED J
	M		METRIC PART

Information:

HYDRAULIC SYSTEM

CYLINDER GP

Special Instruction

Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}

Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}

Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}

Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}

Installation Procedure for the 373-5844 Thumb Gp {0679, 6547, 7562}
Installation Procedure for the 373-5844 Thumb Gp {0679, 6547, 7562}

Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}

Service Letter-NACD

PRODUCT SUPPORT PROGRAM FOR REPLACING THE BUCKET CYLINDER GROUP ON CERTAIN 315D EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE BUCKET CYLINDER GROUP ON CERTAIN 315D EXCAVATORS

PRODUCT SUPPORT PROGRAM FOR REPLACING THE SENSOR INSIDE THE POSITION SENSING CYLINDER ON CERTAIN EXCAVATORS EQUIPPED WITH CAT GRADE CONTROL
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SENSOR INSIDE THE POSITION SENSING CYLINDER ON CERTAIN EXCAVATORS EQUIPPED WITH CAT GRADE CONTROL

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Technical Information Bulletin

Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}

Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}

New Cylinders are Used on Certain 312D, 313D, 315D, and 318D Excavators{5456, 5457, 5458}
New Cylinders are Used on Certain 312D, 313D, 315D, and 318D Excavators{5456, 5457, 5458}

Specifications

Boom Cylinder Lines - Left Hand
315D and 318D Excavators Machine System Specifications

Boom Cylinder Lines - Right Hand
315D and 318D Excavators Machine System Specifications

Boom Cylinder Lines
315D and 318D Excavators Machine System Specifications

Stick Cylinder
315D and 318D Excavators Machine System Specifications

Boom Cylinder
315D and 318D Excavators Machine System Specifications

Bucket Cylinder
315D and 318D Excavators Machine System Specifications

Stick Cylinder
315D and 318D Excavators Machine System Specifications

Bucket Cylinder
315D and 318D Excavators Machine System Specifications

Boom Cylinder
315D and 318D Excavators Machine System Specifications

Bucket Cylinder
315D and 318D Excavators Machine System Specifications

Boom Lines
315D and 318D Excavators Machine System Specifications

Cylinder (Thumb)
315D and 318D Excavators Machine System Specifications

Tool Operating Manual

Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}

1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}

Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}

4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}

Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}

Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}

Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}

Service Letter-China

PRODUCT SUPPORT PROGRAM FOR REPLACING THE SENSOR INSIDE THE POSITION SENSING CYLINDER ON CERTAIN EXCAVATORS EQUIPPED WITH CAT GRADE CONTROL
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SENSOR INSIDE THE POSITION SENSING CYLINDER ON CERTAIN EXCAVATORS EQUIPPED WITH CAT GRADE CONTROL

Service Letter-Asia

Systems Operation

Cylinders (Boom, Stick and Bucket)
315D and 318D Excavators Hydraulic System

Reuse And Salvage Guidelines

Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}

Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}

Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}

Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}

Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}

Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}

Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}

Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}

HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}

Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}

Contamination Control Guidelines

Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}

Applied Failure Analysis

Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}

Service Letter-APD

PRODUCT SUPPORT PROGRAM FOR REPLACING THE SENSOR INSIDE THE POSITION SENSING CYLINDER ON CERTAIN EXCAVATORS EQUIPPED WITH CAT GRADE CONTROL
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SENSOR INSIDE THE POSITION SENSING CYLINDER ON CERTAIN EXCAVATORS EQUIPPED WITH CAT GRADE CONTROL

Testing and Adjusting

Cylinder Drift - Check - Empty Bucket
315D and 318D Excavators Hydraulic System

Cylinder Drift - Check - Loaded Bucket
315D and 318D Excavators Hydraulic System

Cylinder Speed - Check
315D and 318D Excavators Hydraulic System

Boom Down Regeneration (PRV) - Calibrate
315D and 318D Excavators Hydraulic System

Bench Test Procedures

Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}

Disassembly and Assembly

Stick Cylinder - Remove and Install
315D, 318D and 319D Excavators Machine Systems

Boom Cylinder - Remove and Install
315D, 318D and 319D Excavators Machine Systems

Bucket Cylinder - Remove and Install
315D, 318D and 319D Excavators Machine Systems

Service Magazine

Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2013/02/28

Correction to Testing and Adjusting , "Cylinder Drift - Check - Empty Bucket" for Certain Excavators {7562}
2008/09/29

A New Hydraulic Cylinder Increases the Durability of the Bucket Cylinder Gp on 315D Excavators {5117, 5457}
2009/05/25

Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2009/01/05

Correct Ring Orientation Provides Smooth Hydraulic Cylinder Operation {5456, 5458}
2009/03/16

A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Service Limit of the Bushings At the Front Linkages Are Now Available on Certain Excavators {5456, 5457, 5458, 6060, 6301, 6302, 6460, 6501, 6502, 6516, 6521, 6535, 6536}
2012/05/18

Improved Pin Assemblies and Bushings for the Boom, the Stick, and the Bucket Pin Joints Are Now Used on Certain Excavators and Mobile Hydraulic Power Units {5456, 5457, 5458, 6501, 6502, 6513}
2011/03/09

An Improved Bucket Cylinder Group and Lines Group is Now Used on Certain 315D, 318D and 316E Excavators {5457}
2013/02/06

Improved Quality Control Process With Class II and Class III Position Sensing Cylinder Sensor {5457}
Improved Quality Control Process With Class II and Class III Position Sensing Cylinder Sensor {5457}

A New Stick Cylinder and Seal Group Is Now Used on Certain Excavators {5458}
A New Stick Cylinder and Seal Group Is Now Used on Certain Excavators {5458}

Caterpillar Parts SIS Catalog 315D L :

Truck sale:

Caterpillar 315D L
- Crawler excavators
TRACTOR & EQUIPMENT CO.

34.204

Caterpillar 315DL, Raupenbagger, Bau-Und Bergbauausrüstung
- Crawler excavators
WILLIAM ADAMS PTY. LTD.

57.122

Caterpillar 315DL, Raupenbagger, Bau-Und Bergbauausrüstung
- Crawler excavators
TOROMONT CAT

89.750

Caterpillar 315DL, Raupenbagger, Bau-Und Bergbauausrüstung
- Crawler Excavators
CARTER MACHINERY COMPANY, INC.

98,000

Caterpillar 315DL, Construction
- Crawler Excavators
MACALLISTER MACHINERY CO., INC