WORK TOOLS
BUCKET GPWORK TOOLS
BUCKET GP
#SEBP48611040
239-2509: BUCKET & ADJUSTER GP
239-2509 BUCKET & ADJUSTER GP -GENERAL PURPOSE
S/N CJN1-UP
617-MM (24-IN) WIDE X 0.35-CU M (0.45-CU YD) CAPACITY. K-80 ADAPTERS, (3X)
Type 2
AN ATTACHMENT
S/N CJN1-UP
617-MM (24-IN) WIDE X 0.35-CU M (0.45-CU YD) CAPACITY. K-80 ADAPTERS, (3X)
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your 315D L EXCAVATOR:
CATERPILLAR SIS#SEBP48611041
239-2510: BUCKET & ADJUSTER GP
239-2510 BUCKET & ADJUSTER GP -GENERAL PURPOSE
S/N CJN1-UP
770-MM (30-IN) WIDE X 0.5-CU M (0.6-CU YD) CAPACITY. K-80 ADAPTERS, (4X)
AN ATTACHMENT
S/N CJN1-UP
770-MM (30-IN) WIDE X 0.5-CU M (0.6-CU YD) CAPACITY. K-80 ADAPTERS, (4X)
AN ATTACHMENT
For full view, you need register
Parts for your 315D L EXCAVATOR:
CATERPILLAR SIS#SEBP48611042
239-2511: BUCKET & ADJUSTER GP
239-2511 BUCKET & ADJUSTER GP -GENERAL PURPOSE
S/N CJN1-UP
922-MM (36-IN) WIDE X 0.6-CU M (0.8-CU YD) CAPACITY. K-80 ADAPTERS, (5X)
AN ATTACHMENT
S/N CJN1-UP
922-MM (36-IN) WIDE X 0.6-CU M (0.8-CU YD) CAPACITY. K-80 ADAPTERS, (5X)
AN ATTACHMENT
For full view, you need register
Parts for your 315D L EXCAVATOR:
CATERPILLAR SIS#SEBP48611043
239-2512: BUCKET & ADJUSTER GP
239-2512 BUCKET & ADJUSTER GP -GENERAL PURPOSE
S/N CJN1-UP
1074-MM (42-IN) WIDE X 0.7-CU M (1-CU YD) CAPACITY. K-80 ADAPTERS, (5X)
Type 1
AN ATTACHMENT
S/N CJN1-UP
1074-MM (42-IN) WIDE X 0.7-CU M (1-CU YD) CAPACITY. K-80 ADAPTERS, (5X)
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your 315D L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 239-2764 | [1] | EDGE AS | |
| 1A. | 220-9086 | [1] | ADAPTER-TIP (K-80, 2-STRAP, LH) | |
| 1B. | 220-9084 | [3] | ADAPTER-TIP (K-80, 2-STRAP, CENTER) | |
| 1C. | 220-9085 | [1] | ADAPTER-TIP (K-80, 2-STRAP, RH) | |
| 1D. | 8P-9770 | [1] | PLATE | |
| 2. | 239-2760 | [1] | PLATE AS-BOX | |
| 3. | 216-5858 | [2] | PLATE-WEAR | |
| 4. | 239-2769 | [1] | PLATE-WEAR | |
| 5. | 239-2768 | [1] | PLATE-WEAR | |
| 6. | 239-2767 | [1] | PLATE-REINFORCEMENT | |
| 7. | 2C-9259 | [1] | PLATE-IDENTIFICATION (CAT) | |
| 8. | 106-6757 Y | [1] | ADJUSTER GP-BUCKET | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP48611044
239-2512: BUCKET & ADJUSTER GP
239-2512 BUCKET & ADJUSTER GP -GENERAL PURPOSE
S/N CJN1-UP
1074-MM (42-IN) WIDE X 0.7-CU M (1-CU YD) CAPACITY. K-80 ADAPTERS, (5X)
Type 2
AN ATTACHMENT
S/N CJN1-UP
1074-MM (42-IN) WIDE X 0.7-CU M (1-CU YD) CAPACITY. K-80 ADAPTERS, (5X)
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your 315D L EXCAVATOR:
CATERPILLAR SIS#SEBP48611045
239-2513: BUCKET & ADJUSTER GP
239-2513 BUCKET & ADJUSTER GP -GENERAL PURPOSE
S/N CJN1-UP
1226-M (48-IN) WIDE X 0.9-CU M (1.2-CU YD) CAPACITY. K-80 ADAPTERS, (6X)
AN ATTACHMENT
S/N CJN1-UP
1226-M (48-IN) WIDE X 0.9-CU M (1.2-CU YD) CAPACITY. K-80 ADAPTERS, (6X)
AN ATTACHMENT
For full view, you need register
Parts for your 315D L EXCAVATOR:
CATERPILLAR SIS#SEBP48611046
239-2514: BUCKET & ADJUSTER GP
239-2514 BUCKET & ADJUSTER GP -HEAVY-DUTY ROCK
S/N CJN1-UP
619-MM (24-IN) WIDE X 0.4-CU M (0.5-CU YD) CAPACITY. K-90 ADAPTERS, (3X)
Type 1
AN ATTACHMENT
S/N CJN1-UP
619-MM (24-IN) WIDE X 0.4-CU M (0.5-CU YD) CAPACITY. K-90 ADAPTERS, (3X)
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your 315D L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 239-2819 | [1] | EDGE AS | |
| 1A. | 220-9095 | [1] | ADAPTER-TIP (K-90, 2-STRAP, RH) | |
| 1B. | 220-9094 | [1] | ADAPTER-TIP (K-90, 2-STRAP, CENTER) | |
| 1C. | 220-9096 | [1] | ADAPTER-TIP (K-90, 2-STRAP, LH) | |
| 1D. | 8P-9770 | [1] | PLATE | |
| 2. | 229-7646 | [2] | PLATE-WEAR | |
| 3. | 239-2823 | [2] | PLATE-WEAR | |
| 4. | 239-2822 | [1] | PLATE-WEAR | |
| 5. | 239-2821 | [1] | PLATE-WEAR | |
| 6. | 239-2820 | [1] | PLATE-WEAR | |
| 7. | 2C-9259 | [2] | PLATE-IDENTIFICATION (CAT) | |
| 8. | 106-6757 Y | [1] | ADJUSTER GP-BUCKET | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP48611047
239-2514: BUCKET & ADJUSTER GP
239-2514 BUCKET & ADJUSTER GP -HEAVY-DUTY ROCK
S/N CJN1-UP
619-MM (24-IN) WIDE X 0.4-CU M (0.5-CU YD) CAPACITY. K-90 ADAPTERS, (3X)
Type 2
AN ATTACHMENT
S/N CJN1-UP
619-MM (24-IN) WIDE X 0.4-CU M (0.5-CU YD) CAPACITY. K-90 ADAPTERS, (3X)
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your 315D L EXCAVATOR:
CATERPILLAR SIS#SEBP48611048
239-2515: BUCKET & ADJUSTER GP
239-2515 BUCKET & ADJUSTER GP -HEAVY-DUTY ROCK
S/N CJN1-UP
770-MM (30-IN) WIDE X 0.5-CU M (0.6-CU YD) CAPACITY. K-90 ADAPTERS, (4X)
AN ATTACHMENT
S/N CJN1-UP
770-MM (30-IN) WIDE X 0.5-CU M (0.6-CU YD) CAPACITY. K-90 ADAPTERS, (4X)
AN ATTACHMENT
For full view, you need register
Parts for your 315D L EXCAVATOR:
CATERPILLAR SIS#SEBP48611049
239-2516: BUCKET & ADJUSTER GP
239-2516 BUCKET & ADJUSTER GP -HEAVY-DUTY ROCK
S/N CJN1-UP
924-MM (36-IN) WIDE X 0.6-CU M (0.8-CU YD) CAPACITY. K-90 ADAPTERS, (5X)
AN ATTACHMENT
S/N CJN1-UP
924-MM (36-IN) WIDE X 0.6-CU M (0.8-CU YD) CAPACITY. K-90 ADAPTERS, (5X)
AN ATTACHMENT
For full view, you need register
Parts for your 315D L EXCAVATOR:
CATERPILLAR SISInformation:
WORK TOOLS
BUCKET GP
Operation and Maintenance Manual
Quick Coupler Operation - Hydraulic Pin Grabber Quick Coupler (If Equipped)
315D and 318D Excavators
315D and 318D Excavators
Special Instruction
Converting Excavator Buckets from J-Series Base Edge Assemblies to the K-Series{6523, 6800, 6803, 6823}
Converting Excavator Buckets from J-Series Base Edge Assemblies to the K-Series{6523, 6800, 6803, 6823}
Converting Excavator Buckets from J-Series Base Edge Assemblies to the K-Series{6523, 6800, 6803, 6823}
Rework Procedure for the Repair or Replacement of the Excavator Bucket Hinge{6001, 6101, 6102, 6112, 6131, 6503, 6514, 6523, 6524, 6526, 6528, 6529, 6531, 6537, 6539}
Rework Procedure for the Repair or Replacement of the Excavator Bucket Hinge{6001, 6101, 6102, 6112, 6131, 6503, 6514, 6523, 6524, 6526, 6528, 6529, 6531, 6537, 6539}
Rework Procedure for the Repair or Replacement of the Excavator Bucket Hinge{6001, 6101, 6102, 6112, 6131, 6503, 6514, 6523, 6524, 6526, 6528, 6529, 6531, 6537, 6539}
Measuring Wear on Bucket Base Edges (Determining Useful Life) {6101}
Measuring Wear on Bucket Base Edges (Determining Useful Life) {6101}
Measuring Wear on Bucket Base Edges (Determining Useful Life) {6101}
Rework Procedures for the Excavator D and E-Series Buckets {0679, 6001}
Rework Procedures for the Excavator D and E-Series Buckets {0679, 6001}
Rework Procedures for the Excavator D and E-Series Buckets {0679, 6001}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Installation and Weld Procedure for Modular Shroud System on Base Edge of Certain 320 through 390 Excavator Buckets {6001}
Installation and Weld Procedure for Modular Shroud System on Base Edge of Certain 320 through 390 Excavator Buckets {6001}
Installation and Weld Procedure for Modular Shroud System on Base Edge of Certain 320 through 390 Excavator Buckets {6001}
Procedure for Installation and Removal of Cat<SUP>®</SUP> Advansys Tips {0751, 6001, 6800, 6805}
Procedure for Installation and Removal of Cat® Advansys Tips {0751, 6001, 6800, 6805}
Procedure for Installation and Removal of Cat® Advansys Tips {0751, 6001, 6800, 6805}
Instructions for Welding the Cat<SUP>®</SUP> Advansys™ Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Instructions for Welding the Cat® Advansys™ Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Instructions for Welding the Cat® Advansys™ Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Service Letter-Australia
PRODUCT SUPPORT PROGRAM FOR REWORKING BUCKETS ON CERTAIN 312C, 312D, 315C, AND 315D EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING BUCKETS ON CERTAIN 312C, 312D, 315C, AND 315D EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING BUCKETS ON CERTAIN 312C, 312D, 315C, AND 315D EXCAVATORS
Service Letter-CFEL
Specifications
Tool Operating Manual
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REWORKING BUCKETS ON CERTAIN 312C, 312D, 315C, AND 315D EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING BUCKETS ON CERTAIN 312C, 312D, 315C, AND 315D EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING BUCKETS ON CERTAIN 312C, 312D, 315C, AND 315D EXCAVATORS
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Service Magazine
A Procedure to Weld Bucket Adjuster Group Flange in Place for Use with Quick Couplers on Certain 311 to 349 Excavators {0679, 6001, 6503, 6513, 6531, 6700}
A Procedure to Weld Bucket Adjuster Group Flange in Place for Use with Quick Couplers on Certain 311 to 349 Excavators {0679, 6001, 6503, 6513, 6531, 6700}
A Procedure to Weld Bucket Adjuster Group Flange in Place for Use with Quick Couplers on Certain 311 to 349 Excavators {0679, 6001, 6503, 6513, 6531, 6700}
Caterpillar Parts SIS Catalog 315D L :
Truck sale:
34.204
Caterpillar 315DL, Raupenbagger, Bau-Und Bergbauausrüstung
- Crawler excavators
WILLIAM ADAMS PTY. LTD.
- Crawler excavators
WILLIAM ADAMS PTY. LTD.
89.750
Caterpillar 315DL, Raupenbagger, Bau-Und Bergbauausrüstung
- Crawler Excavators
CARTER MACHINERY COMPANY, INC.
- Crawler Excavators
CARTER MACHINERY COMPANY, INC.
