AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

319D L & 319D LN Excavators EAW00001-UP (MACHINE) POWERED BY C4.2 Engine BASIC ENGINE Caterpillar SIS



EXCAVATOR 319D L EXCAVATOR EAW
 319D L & 319D LN Excavators EAW00001-UP (MACHINE) POWERED BY C4.2 Engine SEBP4862 319D L EAW   (2008)

Parts group 319D L:

  For full view, you need register
BASIC ENGINE
BELT TIGHTENER GP
PULLEY GP-IDLER
327-7193 PULLEY GP-IDLER
327-7193 PULLEY GP-IDLER
S/N FMH1-UP; EAW1-UP
PART OF 255-3032 COMPRESSOR & MTG GP-REFRIG
CAMSHAFT GP
CAMSHAFT GP
305-4955 CAMSHAFT GP
305-4955 CAMSHAFT GP
S/N JKH1-UP
PART OF 272-4816 ENGINE AR, 420-2182 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
CRANKSHAFT GP
CRANKSHAFT GP
296-4789 CRANKSHAFT GP
296-4789 CRANKSHAFT GP
S/N JKH1-UP
PART OF 272-4816 ENGINE AR, 420-2182 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
CYLINDER BLOCK GP
CYLINDER BLOCK GP
296-4699 CYLINDER BLOCK GP
296-4699 CYLINDER BLOCK GP
S/N JKH1-UP
PART OF 296-4787 CYLINDER BLOCK GP
ALSO AN ATTACHMENT
CYLINDER BLOCK GP
296-4787 CYLINDER BLOCK GP
296-4787 CYLINDER BLOCK GP
S/N JKH1-UP
PART OF 272-4816 ENGINE AR, 420-2182 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
CYLINDER HEAD GP
CYLINDER HEAD AS
305-4766 CYLINDER HEAD AS
305-4766 CYLINDER HEAD AS
S/N JKH1-UP
PART OF 296-4784 CYLINDER HEAD GP
ALSO AN ATTACHMENT
CYLINDER HEAD GP
296-4784 CYLINDER HEAD GP
296-4784 CYLINDER HEAD GP
S/N JKH1-UP
PART OF 272-4816 ENGINE AR, 420-2182 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
DRIVE GP-FAN
PULLEY GP-FAN & ALT DRIVE
272-4819 PULLEY GP-FAN & ALT DRIVE
272-4819 PULLEY GP-FAN & ALT DRIVE
S/N FMH1-UP; EAW1-UP
PART OF 272-4820, 272-4821, 324-4041, 324-4055, 324-4058, 420-2173 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
FLYWHEEL GP
FLYWHEEL GP
296-4783 FLYWHEEL GP
296-4783 FLYWHEEL GP
S/N JKH1-UP
PART OF 272-4816 ENGINE AR, 420-2182 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
GEAR GP
GEAR GP-FRONT
296-4651 GEAR GP-FRONT
296-4651 GEAR GP-FRONT
S/N JKH1-UP
PART OF 272-4816 ENGINE AR, 420-2182 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
HOUSING GP-FRONT
296-4788 HOUSING GP-FRONT
296-4788 HOUSING GP-FRONT
S/N JKH1-UP
PART OF 272-4816 ENGINE AR, 420-2182 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
HOUSING GP-FLYWHEEL
HOUSING GP-FLYWHEEL
296-4803 HOUSING GP-FLYWHEEL
296-4803 HOUSING GP-FLYWHEEL
S/N JKH1-UP
PART OF 272-4816 ENGINE AR, 420-2182 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
HOUSING GP-FRONT
GEAR GP-FRONT
296-4651 GEAR GP-FRONT
296-4651 GEAR GP-FRONT
S/N JKH1-UP
PART OF 272-4816 ENGINE AR, 420-2182 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
HOUSING GP-FRONT
296-4788 HOUSING GP-FRONT
296-4788 HOUSING GP-FRONT
S/N JKH1-UP
PART OF 272-4816 ENGINE AR, 420-2182 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
MOUNTING GP-ALTERNATOR
MOUNTING GP-ALTERNATOR
296-4798 MOUNTING GP-ALTERNATOR
296-4798 MOUNTING GP-ALTERNATOR
S/N JKH1-UP
PART OF 272-4816 ENGINE AR, 420-2182 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
MOUNTING GP-ENGINE
MOUNTING GP-ENGINE
255-3035 MOUNTING GP-ENGINE
255-3035 MOUNTING GP-ENGINE
S/N FMH1-UP; EAW1-UP
PART OF 255-3030, 279-7748 INSTALLATION AR-ENGINE
MOUNTING GP-STARTING MOTOR
MOUNTING GP-STARTING MOTOR
296-4637 MOUNTING GP-STARTING MOTOR
296-4637 MOUNTING GP-STARTING MOTOR
S/N JKH1-UP
PART OF 272-4816 ENGINE AR, 420-2182 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
PAN GP-OIL
PAN GP-OIL
296-4780 PAN GP-OIL
296-4780 PAN GP-OIL
S/N JKH1-UP
PART OF 272-4816 ENGINE AR, 420-2182 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
PISTON & ROD GP
PISTON & ROD GP
296-4796 PISTON & ROD GP
296-4796 PISTON & ROD GP
S/N JKH1-UP
PART OF 272-4816 ENGINE AR, 420-2182 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
PULLEY GP
PULLEY AS-IDLER
296-4738 PULLEY AS-IDLER
296-4738 PULLEY AS-IDLER
S/N FMH1-UP; EAW1-UP
PART OF 272-4819 PULLEY GP-FAN & ALT DRIVE
ALSO AN ATTACHMENT
PULLEY GP-FAN & ALT DRIVE
272-4819 PULLEY GP-FAN & ALT DRIVE
272-4819 PULLEY GP-FAN & ALT DRIVE
S/N FMH1-UP; EAW1-UP
PART OF 272-4820, 272-4821, 324-4041, 324-4055, 324-4058, 420-2173 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
PULLEY GP-IDLER
327-7193 PULLEY GP-IDLER
327-7193 PULLEY GP-IDLER
S/N FMH1-UP; EAW1-UP
PART OF 255-3032 COMPRESSOR & MTG GP-REFRIG
VALVE MECHANISM GP
COVER GP-VALVE MECHANISM
296-4786 COVER GP-VALVE MECHANISM
296-4786 COVER GP-VALVE MECHANISM
S/N JKH1-UP
PART OF 272-4816 ENGINE AR, 420-2182 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
VALVE MECHANISM GP
305-4954 VALVE MECHANISM GP
305-4954 VALVE MECHANISM GP
S/N JKH1-UP
PART OF 272-4816 ENGINE AR, 420-2182 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT

Information:

(For parts list, see above)

Operation and Maintenance Manual
Belts - Inspect/Adjust/Replace
319D Excavator
Service Magazine
The Durability of the Idler Puller Assembly in the Refrigerant Compressor Gp is Improved {1358}
2010/05/31
Specifications
Camshaft
C4.2 and C6.4 Engines for Caterpillar Built Machines
Information Release Memo
CAT� REMAN ANNOUNCES ADDITIONAL REMANUFACTURED COMPONENTS FOR CERTAIN 3044, 3046, 3064, 3066 & C3.4 ENGINES
CAT� REMAN ANNOUNCES ADDITIONAL REMANUFACTURED COMPONENTS FOR CERTAIN 3044, 3046, 3064, 3066 & C3.4 ENGINES
Testing and Adjusting
Excessive Bearing Wear - Inspect
C4.2 and C6.4 Engines for Caterpillar Built Machines
Disassembly and Assembly
Camshaft Gear - Remove and Install
C4.2 Engine for Caterpillar Built Machines
Camshaft Bearings - Remove and Install
C4.2 Engine for Caterpillar Built Machines
Camshaft - Remove and Install
C4.2 Engine for Caterpillar Built Machines
Operation and Maintenance Manual
Belts - Inspect/Adjust/Replace
319D Excavator
Disassembly and Assembly
Refrigerant Compressor - Remove and Install
315D, 318D and 319D Excavators C4.2 Engine Supplement
Specifications
Connecting Rod Bearing Journal
C4.2 and C6.4 Engines for Caterpillar Built Machines
Main Bearing Journal
C4.2 and C6.4 Engines for Caterpillar Built Machines
Crankshaft
C4.2 and C6.4 Engines for Caterpillar Built Machines
Tool Operating Manual
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Reuse And Salvage Guidelines
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Information Release Memo
CAT� REMAN ANNOUNCES ADDITIONAL REMANUFACTURED COMPONENTS FOR CERTAIN 3044, 3046, 3064, 3066 & C3.4 ENGINES
CAT� REMAN ANNOUNCES ADDITIONAL REMANUFACTURED COMPONENTS FOR CERTAIN 3044, 3046, 3064, 3066 & C3.4 ENGINES
Testing and Adjusting
Excessive Bearing Wear - Inspect
C4.2 and C6.4 Engines for Caterpillar Built Machines
Main Bearings - Inspect
C4.2 and C6.4 Engines for Caterpillar Built Machines
Disassembly and Assembly
Bearing Clearance - Check
C4.2 Engine for Caterpillar Built Machines
Crankshaft Gear - Remove and Install
C4.2 Engine for Caterpillar Built Machines
Crankshaft Rear Seal - Install
C4.2 Engine for Caterpillar Built Machines
Crankshaft Rear Seal - Remove
C4.2 Engine for Caterpillar Built Machines
Crankshaft Pulley - Remove and Install
315D, 318D and 319D Excavators C4.2 Engine Supplement
Crankshaft Front Seal - Remove
C4.2 Engine for Caterpillar Built Machines
Crankshaft Front Seal - Install
C4.2 Engine for Caterpillar Built Machines
Crankshaft Pulley - Remove and Install
C4.2 Engine for Caterpillar Built Machines
Crankshaft Main Bearings - Remove and Install
C4.2 Engine for Caterpillar Built Machines
Crankshaft - Remove
C4.2 Engine for Caterpillar Built Machines
Crankshaft - Install
C4.2 Engine for Caterpillar Built Machines
Service Magazine
Use the 171-7212 Wear Sleeve to Repair the Crankshaft Hub {1160}
2011/09/20
Specifications
Main Bearing Journal
C4.2 and C6.4 Engines for Caterpillar Built Machines
Cylinder Block
C4.2 and C6.4 Engines for Caterpillar Built Machines
Tool Operating Manual
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Testing and Adjusting
Excessive Bearing Wear - Inspect
C4.2 and C6.4 Engines for Caterpillar Built Machines
Cylinder Block - Inspect
C4.2 and C6.4 Engines for Caterpillar Built Machines
Main Bearings - Inspect
C4.2 and C6.4 Engines for Caterpillar Built Machines
Troubleshooting
Cylinder Is Noisy
C4.2 and C6.4 Engines for Caterpillar Built Machines
Disassembly and Assembly
Bearing Clearance - Check
C4.2 Engine for Caterpillar Built Machines
Camshaft Bearings - Remove and Install
C4.2 Engine for Caterpillar Built Machines
Cylinder Liner - Remove
C4.2 Engine for Caterpillar Built Machines
Cylinder Liner - Install
C4.2 Engine for Caterpillar Built Machines
Piston Cooling Jets - Remove and Install
C4.2 Engine for Caterpillar Built Machines
Operation and Maintenance Manual
Engine Valve Lash - Check
319D Excavator
Special Instruction
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Specifications
Cylinder Head
C4.2 and C6.4 Engines for Caterpillar Built Machines
Fuel Injection Nozzles
C4.2 and C6.4 Engines for Caterpillar Built Machines
Cylinder Head
C4.2 and C6.4 Engines for Caterpillar Built Machines
Tool Operating Manual
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Information Release Memo
CAT� REMAN ANNOUNCES ADDITIONAL REMANUFACTURED COMPONENTS FOR CERTAIN 3044, 3046, 3064, 3066 & C3.4 ENGINES
CAT� REMAN ANNOUNCES ADDITIONAL REMANUFACTURED COMPONENTS FOR CERTAIN 3044, 3046, 3064, 3066 & C3.4 ENGINES
Testing and Adjusting
Valve Guide - Inspect
C4.2 and C6.4 Engines for Caterpillar Built Machines
Cylinder Head - Inspect
C4.2 and C6.4 Engines for Caterpillar Built Machines
Engine Valve Lash - Inspect/Adjust
C4.2 and C6.4 Engines for Caterpillar Built Machines
Disassembly and Assembly
Camshaft Bearings - Remove and Install
C4.2 Engine for Caterpillar Built Machines
Inlet and Exhaust Valve Springs - Remove and Install
C4.2 Engine for Caterpillar Built Machines
Inlet and Exhaust Valves - Remove and Install
C4.2 Engine for Caterpillar Built Machines
Inlet and Exhaust Valve Guides - Remove and Install
C4.2 Engine for Caterpillar Built Machines
Cylinder Head - Remove
C4.2 Engine for Caterpillar Built Machines
Cylinder Head - Install
C4.2 Engine for Caterpillar Built Machines
Operation and Maintenance Manual
Belts - Inspect/Adjust/Replace
319D Excavator
Specifications
Fan Drive
C4.2 and C6.4 Engines for Caterpillar Built Machines
Systems Operation
Introduction
C4.2 and C6.4 Engines for Caterpillar Built Machines
Technical Information Bulletin
An Inspection Process Improves the Reliability of the Flywheel Housing{1157}
An Inspection Process Improves the Reliability of the Flywheel Housing{1157}
Specifications
Flywheel
C4.2 and C6.4 Engines for Caterpillar Built Machines
Testing and Adjusting
Flywheel - Inspect
C4.2 and C6.4 Engines for Caterpillar Built Machines
Disassembly and Assembly
Flywheel - Remove
C4.2 Engine for Caterpillar Built Machines
Flywheel - Install
C4.2 Engine for Caterpillar Built Machines
Engine News
An Improved Front Gear Train Timing Procedure Is Used for 3406E, 3456, C-15, C-16, C15, and C18 Engines {1206}
2012/12/14
Specifications
Gear Group (Front)
C4.2 and C6.4 Engines for Caterpillar Built Machines
Disassembly and Assembly
Gear Group (Front) - Remove - Idler Gear Only
C4.2 Engine for Caterpillar Built Machines
Gear Group (Front) - Install - Idler Gear Only
C4.2 Engine for Caterpillar Built Machines
Service Magazine
An Improved Front Gear Train Timing Procedure Is Used for 3406E, 3456, C-15, C-16, C15, and C18 Engines {1206}
2012/12/13
Technical Information Bulletin
Field Returns Of Failed Engine Rear Crankshaft Seals on Certain Excavators and Mobile Hydraulic Power Units Are Needed For Failure Analysis{1157}
Field Returns Of Failed Engine Rear Crankshaft Seals on Certain Excavators and Mobile Hydraulic Power Units Are Needed For Failure Analysis{1157}
Testing and Adjusting
Flywheel Housing - Inspect
C4.2 and C6.4 Engines for Caterpillar Built Machines
Disassembly and Assembly
Flywheel Housing - Remove and Install
C4.2 Engine for Caterpillar Built Machines
Front Plate - Remove
C4.2 Engine for Caterpillar Built Machines
Front Plate - Install
C4.2 Engine for Caterpillar Built Machines
Housing (Front) - Remove
C4.2 Engine for Caterpillar Built Machines
Housing (Front) - Install
C4.2 Engine for Caterpillar Built Machines
Specifications
Engine Mounting
319D Excavator Machine System Specifications
Disassembly and Assembly
Engine Front Mount - Remove and Install
315D, 318D and 319D Excavators C4.2 Engine Supplement
Engine Rear Mount - Remove and Install
315D, 318D and 319D Excavators C4.2 Engine Supplement
Operation and Maintenance Manual
Engine Oil Level - Check
319D Excavator
Engine Oil and Filter - Change
319D Excavator
Specifications
Engine Oil Pan
C4.2 and C6.4 Engines for Caterpillar Built Machines
Contamination Control Guidelines
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Disassembly and Assembly
Oil Pan - Remove and Install
315D, 318D and 319D Excavators C4.2 Engine Supplement
Engine Oil Pan - Remove
C4.2 Engine for Caterpillar Built Machines
Engine Oil Pan - Install
C4.2 Engine for Caterpillar Built Machines
Service Magazine
Investigation of the Liquid Level Switch on the Engine Oil Pan and on the Hydraulic Tank for Excavators {1302, 1408, 5056, 5068, 7422}
2009/08/31
Special Instruction
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Technical Information Bulletin
Specifications
Connecting Rod Bearing Journal
C4.2 and C6.4 Engines for Caterpillar Built Machines
Connecting Rod
C4.2 and C6.4 Engines for Caterpillar Built Machines
Piston and Rings
C4.2 and C6.4 Engines for Caterpillar Built Machines
Tool Operating Manual
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
Information Release Memo
CAT� REMAN ANNOUNCES ADDITIONAL REMANUFACTURED COMPONENTS FOR CERTAIN 3044, 3046, 3064, 3066 & C3.4 ENGINES
CAT� REMAN ANNOUNCES ADDITIONAL REMANUFACTURED COMPONENTS FOR CERTAIN 3044, 3046, 3064, 3066 & C3.4 ENGINES
Testing and Adjusting
Engine Crankcase Pressure (Blowby) - Test
C4.2 and C6.4 Engines for Caterpillar Built Machines
Excessive Bearing Wear - Inspect
C4.2 and C6.4 Engines for Caterpillar Built Machines
Connecting Rod Bearings - Inspect
C4.2 and C6.4 Engines for Caterpillar Built Machines
Piston Ring Groove - Inspect
C4.2 and C6.4 Engines for Caterpillar Built Machines
Compression - Test
C4.2 and C6.4 Engines for Caterpillar Built Machines
Connecting Rod - Inspect
C4.2 and C6.4 Engines for Caterpillar Built Machines
Piston Height - Inspect
C4.2 and C6.4 Engines for Caterpillar Built Machines
Disassembly and Assembly
Bearing Clearance - Check
C4.2 Engine for Caterpillar Built Machines
Pistons and Connecting Rods - Disassemble
C4.2 Engine for Caterpillar Built Machines
Pistons and Connecting Rods - Install
C4.2 Engine for Caterpillar Built Machines
Connecting Rod Bearings - Install
C4.2 Engine for Caterpillar Built Machines
Pistons and Connecting Rods - Remove
C4.2 Engine for Caterpillar Built Machines
Connecting Rod Bearings - Remove
C4.2 Engine for Caterpillar Built Machines
Pistons and Connecting Rods - Assemble
C4.2 Engine for Caterpillar Built Machines
Piston Cooling Jets - Remove and Install
C4.2 Engine for Caterpillar Built Machines
Service Magazine
Rework Procedure for the Engine Rod Assembly and Bushing on Certain Excavators and Mobile Hydraulic Power Units {1225}
2010/10/22
Specifications
Crankshaft Pulley
C4.2 and C6.4 Engines for Caterpillar Built Machines
Crankshaft Pulley
C4.2 and C6.4 Engines for Caterpillar Built Machines
Disassembly and Assembly
Crankshaft Pulley - Remove and Install
315D, 318D and 319D Excavators C4.2 Engine Supplement
Crankshaft Pulley - Remove and Install
C4.2 Engine for Caterpillar Built Machines
Service Magazine
The Durability of the Idler Puller Assembly in the Refrigerant Compressor Gp is Improved {1358}
2010/05/31
Reuse And Salvage Guidelines
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Bench Test Procedures
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Gear Pumps {5073}
Technical Information Bulletin
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Tool Operating Manual
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
NEHS0566 <NOBR> 4C-9832</NOBR> Large Engine Roll-Over Stand {0599, 0701}
NEHS0566 4C-9832 Large Engine Roll-Over Stand {0599, 0701}
9U-7370 Belt Tension Tester {0599, 0701}
9U-7370 Belt Tension Tester {0599, 0701}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Reuse And Salvage Guidelines
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Service Magazine
Use the 171-7212 Wear Sleeve to Repair the Crankshaft Hub {1160}
2011/09/20
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Operation and Maintenance Manual
Belts - Inspect/Adjust/Replace
319D Excavator
Truck Engine News
Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209}
2012/10/08
Engine News
Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209}
2012/10/08
Operation and Maintenance Manual
Engine Valve Lash - Check
319D Excavator
Technical Information Bulletin
Inspect the Rocker Arm Base and Exhaust Bridge on Certain Excavators and Mobile Hydraulic Power Units{1209}
Inspect the Rocker Arm Base and Exhaust Bridge on Certain Excavators and Mobile Hydraulic Power Units{1209}
Specifications
Valve Mechanism Cover
C4.2 and C6.4 Engines for Caterpillar Built Machines
Rocker Shaft
C4.2 and C6.4 Engines for Caterpillar Built Machines
Tool Operating Manual
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
Reuse And Salvage Guidelines
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Testing and Adjusting
Finding Top Center Position for No. 1 Piston
C4.2 and C6.4 Engines for Caterpillar Built Machines
Valve Guide - Inspect
C4.2 and C6.4 Engines for Caterpillar Built Machines
Engine Valve Lash - Inspect/Adjust
C4.2 and C6.4 Engines for Caterpillar Built Machines
Troubleshooting
Valve Lash Is Excessive
C4.2 and C6.4 Engines for Caterpillar Built Machines
Disassembly and Assembly
Valve Mechanism Cover Base - Remove and Install
C4.2 Engine for Caterpillar Built Machines
Rocker Shaft - Disassemble
C4.2 Engine for Caterpillar Built Machines
Rocker Shaft - Assemble
C4.2 Engine for Caterpillar Built Machines
Rocker Shaft and Pushrod - Remove
C4.2 Engine for Caterpillar Built Machines
Rocker Shaft and Pushrod - Install
C4.2 Engine for Caterpillar Built Machines
Lifter Group - Remove and Install
C4.2 Engine for Caterpillar Built Machines
Valve Mechanism Cover - Remove and Install
C4.2 Engine for Caterpillar Built Machines
Service Magazine
Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209}
2012/10/08

Truck sale:

 
 
CATERPILLAR 319DL 2010
- TRACK EXCAVATORS
ZEPPELIN BAUMASCHINEN
Gebrauchtmaschinen Pool Karl-Bröger-Strasse 8 - Alsfeld
 
 
CATERPILLAR 319DL 2010
- TRACK EXCAVATORS
ZEPPELIN BAUMASCHINEN
Gebrauchtmaschinen Pool Karl-Bröger-Strasse 8 - Alsfeld
 
$73,950 USD 
CATERPILLAR 319DL 2008
- TRACK EXCAVATORS
BERGERAT MONNOYEUR POLAND
K. Kolumba 15 - Komorniki -
CATERPILLAR 319DL 2012
 
CATERPILLAR 319DL 2012
- TRACK EXCAVATORS
HASTINGS DEERING (AUSTRALIA) LTD.
CATERPILLAR 319DL 2012
 
CATERPILLAR 319DL 2012
- TRACK EXCAVATORS
ZEPPELIN BAUMASCHINEN
Gebrauchtmaschinen Pool Karl-Bröger-Strasse 8 - Alsfeld
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.