AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

259-0852 CYLINDER & SEAL GP-STICK S/N BZH1-UP; DAY1-UP PART OF 259-0851, 291-0397 CYLINDER & LINES GP-STICK AN ATTACHMENT 319D


HYDRAULIC SYSTEM
CYLINDER GP
DRIVE GP

EXCAVATOR 319D EXCAVATOR BZH
 319D Excavators BZH00001-UP (MACHINE) POWERED BY C4.2 Engine SEBP4864 319D BZH   (2007)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER & SEAL GP-HYDRAULIC
279-8709 CYLINDER & SEAL GP-HYDRAULIC
CYLINDER & SEAL GP-HYDRAULIC
279-8709 CYLINDER & SEAL GP-HYDRAULIC
CYLINDER & SEAL GP-STICK
259-0852 CYLINDER & SEAL GP-STICK
CYLINDER GP-BOOM
259-0850 CYLINDER GP-BOOM
CYLINDER GP-BUCKET
259-0856 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
259-0859 CYLINDER GP-BUCKET
 

#SEBP48640310
 

259-0852: CYLINDER & SEAL GP-STICK

259-0852 CYLINDER & SEAL GP-STICK
S/N BZH1-UP; DAY1-UP
PART OF 259-0851, 291-0397 CYLINDER & LINES GP-STICK
AN ATTACHMENT
i02752178 SEBP4864
2590852 CYLINDER & SEAL GP-STICK Parts scheme
  For full view, you need register

Parts for your 319D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
2. 259-0853 Y [1] CYLINDER GP-STICK  
3. 166-1494 [4] SEAL-LIP TYPE  
  Y   SEPARATE ILLUSTRATION
 

#SEBP48640311
 

259-0850: CYLINDER GP-BOOM

259-0850 CYLINDER GP-BOOM
S/N BZH1-UP; DAY1-UP
120-MM (4.7-IN) BORE X 1193-MM (47-IN) STROKE
PART OF 259-0849 CYLINDER & SEAL GP-BOOM
AN ATTACHMENT
i02751806 SEBP4864
2590850 CYLINDER GP-BOOM Parts scheme
  For full view, you need register

Parts for your 319D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7Y-5116 J [1] RING  
2. 7Y-5119 [1] RING-RETAINING  
3. 9X-3592 J [1] SEAL AS  
4. 087-5507 [1] STOP  
5. 126-2043 [1] HEAD  
6. 143-8027 J [1] RING  
7. 147-5835 M [1] LOCKNUT-SPECIAL  
8. 165-9286 J [1] SEAL-LIP TYPE  
9. 229-1132 [1] PISTON  
10. 247-8789 J [1] RING-SEAL  
11. 266-7801 [1] CYLINDER AS  
11A. 260-2529 [1] BUSHING  
12. 266-7803 [1] ROD AS  
12A. 241-7380 [1] BUSHING  
13. 143-8035 J [1] RING  
14. 147-5837 J [1] RING  
15. 170-9844 J [1] SEAL-BUFFER  
16. 087-5510 J [1] RING  
17. 095-1717 J [1] SEAL-O-RING  
18. 114-0756 [1] BUSHING  
19. 170-9860 J [1] SEAL-U-CUP  
20. 7Y-5216 M [8] BOLT-SOCKET HEAD (M20X2.5X80-MM)  
   
    AVAILABLE REPAIR KIT(S):
  266-7806 J [1] KIT-SEAL (BOOM CYLINDER)  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBP48640312
 

259-0856: CYLINDER GP-BUCKET

259-0856 CYLINDER GP-BUCKET
S/N BZH1-UP; DAY1-UP
110-MM (4.3-IN) BORE X 1048-MM (41.3-IN) STROKE
PART OF 259-0855 CYLINDER & SEAL GP-BUCKET
AN ATTACHMENT
i02750422 SEBP4864
2590856 CYLINDER GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 319D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9X-7301 J [1] SEAL AS  
2. 143-8031 J [1] RING  
3. 143-8150 M [1] LOCKNUT-SPECIAL  
4. 147-5818 [1] PISTON  
5. 266-7813 [1] CYLINDER AS  
5A. 260-2530 [1] BUSHING  
6. 266-7817 [1] ROD AS  
6A. 241-7382 [1] BUSHING  
7. 096-1054 J [1] RING-BACKUP  
8. 096-8139 [1] RING-RETAINING  
9. 114-0755 [1] BUSHING  
10. 129-8068 [1] HEAD  
11. 143-8034 J [1] RING  
12. 147-5819 J [1] RING  
13. 165-9285 J [1] SEAL-LIP TYPE  
14. 170-9843 J [1] SEAL-BUFFER  
15. 170-9859 J [1] SEAL-U-CUP  
16. 095-1716 J [1] SEAL-O-RING  
17. 105-7360 J [1] RING-BACKUP  
18. 7Y-5216 M [8] BOLT-SOCKET HEAD (M20X2.5X80-MM)  
   
    AVAILABLE REPAIR KIT(S):
  179-9625 J [1] KIT-SEAL (BUCKET CYLINDER)  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBP48640313
 

259-0859: CYLINDER GP-BUCKET

259-0859 CYLINDER GP-BUCKET
S/N BZH1-UP; DAY1-UP
120-MM (4.7-IN) BORE X 1030-MM (40.6-IN) STROKE
PART OF 259-0858 CYLINDER & SEAL GP-BUCKET
AN ATTACHMENT
i02757796 SEBP4864
2590859 CYLINDER GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 319D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7Y-5116 J [1] RING  
2. 7Y-5119 [1] RING-RETAINING  
3. 9X-3592 J [1] SEAL AS  
4. 126-2043 [1] HEAD  
5. 147-5835 M [1] LOCKNUT-SPECIAL  
6. 158-9062 [1] PISTON  
7. 165-9286 J [1] SEAL-LIP TYPE  
8. 179-9674 J [1] RING  
9. 266-7820 [1] CYLINDER AS  
9A. 235-7769 [1] BUSHING  
10. 266-7824 [1] ROD AS  
10A. 241-7382 [1] BUSHING  
11. 170-9844 J [1] SEAL-BUFFER  
12. 087-5510 J [1] RING  
13. 095-1717 J [1] SEAL-O-RING  
14. 114-0756 [1] BUSHING  
15. 158-9063 J [2] RING  
16. 170-9860 J [1] SEAL-U-CUP  
17. 7Y-5216 M [8] BOLT-SOCKET HEAD (M20X2.5X80-MM)  
   
    AVAILABLE REPAIR KIT(S):
  236-6368 J [1] KIT-SEAL  
    (ALSO CONTAINS 1-SEAL RING)
  J   (KIT MARKED J SERVICES PART(S) MARKED J)
  M   METRIC PART
 

#SEBP48640314
 

169-0329: CYLINDER GP-COUPLER

169-0329 CYLINDER GP-COUPLER
S/N BZH1-UP; DAY1-UP
60-MM (2.4-IN) BORE X 110-MM (4.3-IN) STROKE
PART OF 169-0327 LOCK GP-QUICK COUPLER
AN ATTACHMENT
i03636155 SEBP4864
1690329 CYLINDER GP-COUPLER Parts scheme
  For full view, you need register

Parts for your 319D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 169-3923 [1] KIT-VALVE (QUICK COUPLER)  
   
    AVAILABLE REPAIR KIT(S):
  202-7897 [1] KIT-SEAL (COUPLER CYLINDER)  
    (INCLUDES 4 SEALS, 3 O-RING SEALS, 5 BACK-UP RINGS & 1 WIPER SEAL)
 

#SEBP48640315
 

172-8402: CYLINDER GP-COUPLER

172-8402 CYLINDER GP-COUPLER
S/N BZH1-UP; DAY1-UP
70-MM (2.8-IN) BORE X 145-MM (5.7-IN) STROKE
PART OF 235-0723 COUPLER GP-QUICK
AN ATTACHMENT
i02842622 SEBP4864
1728402 CYLINDER GP-COUPLER Parts scheme
  For full view, you need register

Parts for your 319D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 172-8406 [1] VALVE GP-CHECK (HYD CYLINDER, QUICK COUPLER)  
1A. 2U-5338 [1] SEAL-O-RING  
1B. 107-7640 [1] SEAL-O-RING  
1C. 9W-3340 [1] SEAL-O-RING  
2. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
   
    AVAILABLE REPAIR KIT(S):
  172-8487 [1] KIT-SEAL (HYD CYLINDER, QUICK COUPLER)  
 

#SEBP48640316
 

279-5614: CYLINDER GP-HYDRAULIC

279-5614 CYLINDER GP-HYDRAULIC
S/N BZH1-UP; DAY1-UP
160-MM (6.3-IN) BORE X 1050-MM (41.3-IN) STROKE
PART OF 279-8709 CYLINDER & SEAL GP-HYDRAULIC
AN ATTACHMENT
i02404659 SEBP4864
2795614 CYLINDER GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 319D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 279-5613 [1] CYLINDER AS  
1A. 279-5609 [1] BUSHING  
2. 106-9595 [1] STOP  
3. 103-8378 [1] RING-RETAINING  
4. 103-8379 [1] RING  
5. 7Y-4622 [1] LOCKNUT (SPECIAL)  
6. 185-0230 J [2] RING  
7. 9X-3604 J [1] SEAL AS  
8. 185-0231 J [1] RING  
9. 185-0592 [1] PISTON  
10. 6I-6784 J [1] RING-SEAL  
11. 087-5005 [1] STOP  
12. 095-1635 J [1] SEAL-O-RING  
13. 087-5550 J [1] RING-BACKUP  
14. 7Y-4631 [1] RING-RETAINING  
15. 6C-6093 [1] BUSHING  
16. 170-9846 J [1] SEAL-BUFFER  
17. 6C-6088 [1] HEAD  
18. 216-0004 J [1] SEAL-U-CUP  
19. 7Y-4628 J [1] RING (BACKUP)  
20. 165-9288 J [1] SEAL-LIP TYPE  
21. 279-5610 [1] ROD AS  
21A. 279-5609 [1] BUSHING  
22. 7Y-5239 M [8] BOLT-SOCKET HEAD (M24X3X100-MM)  
23. 095-0929 J [2] RING-RETAINING (EXTERNAL)  
   
    AVAILABLE REPAIR KIT(S):
  252-1191 J KIT-SEAL (BOOM CYLINDER)  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP48640317
 

360-5447: CYLINDER GP-HYDRAULIC

360-5447 CYLINDER GP-HYDRAULIC -VARIABLE ADJUSTABLE BOOM
S/N BZH1-UP; DAY1-UP
160-MM (6.3-IN) BORE X 1050-NN (41.3-IN) STROKE
PART OF 279-8709 CYLINDER & SEAL GP-HYDRAULIC
AN ATTACHMENT
i05033316 SEBP4864
3605447 CYLINDER GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 319D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6C-6088 [1] HEAD  
2. 7Y-4622 [1] LOCKNUT (SPECIAL)  
3. 7Y-4631 [1] RING-RETAINING  
4. 087-5005 [1] STOP  
5. 103-8379 [1] RING  
6. 106-9595 [1] STOP  
7. 165-9288 J [1] SEAL-LIP TYPE  
8. 170-9846 J [1] SEAL-BUFFER  
9. 185-0592 [1] PISTON  
10. 247-8829 J [1] RING-SEAL  
11. 323-3837 [1] CYLINDER AS-BOOM  
11A. 290-9182 [1] BUSHING  
12. 360-5446 [1] ROD AS  
12A. 290-9182 [1] BUSHING  
13. 087-5550 J [1] RING-BACKUP  
14. 095-0929 J [2] RING-RETAINING (EXTERNAL)  
15. 095-1635 J [1] SEAL-O-RING  
16. 103-8378 [1] RING-RETAINING  
17. 185-0230 J [2] RING  
18. 185-0231 J [1] RING  
19. 216-0004 J [1] SEAL-U-CUP  
20. 5M-6213 [1] PLUG-PIPE (1/4-18-THD)  
21. 5M-6214 [1] PLUG (1/8-27 PTF)  
22. 6C-6093 [1] BUSHING  
23. 7Y-4628 J [1] RING (BACKUP)  
24. 7Y-5239 M [8] BOLT-SOCKET HEAD (M24X3X100-MM)  
25. 9X-3604 J [1] SEAL AS  
   
    AVAILABLE REPAIR KIT(S):
  362-9412 J [1] KIT-SEAL (CYLINDER)(BOOM CYLINDER)  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBP48640318
 

259-0853: CYLINDER GP-STICK

259-0853 CYLINDER GP-STICK
S/N BZH1-UP; DAY1-UP
130-MM (5.1-IN) BORE X 1364-MM (53.7-IN) STROKE
PART OF 259-0852 CYLINDER & SEAL GP-STICK
AN ATTACHMENT
i02752186 SEBP4864
2590853 CYLINDER GP-STICK Parts scheme
  For full view, you need register

Parts for your 319D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7Y-4622 [1] LOCKNUT (SPECIAL)  
2. 9X-3595 J [1] SEAL AS  
3. 147-5851 [1] PISTON  
4. 150-5884 J [1] RING  
5. 216-0004 J [1] SEAL-U-CUP  
6. 247-8829 J [1] RING-SEAL  
7. 266-7807 [1] CYLINDER AS  
7A. 241-7381 [1] BUSHING  
8. 266-7809 [1] ROD AS  
8A. 241-7381 [1] BUSHING  
9. 128-9260 [1] BUSHING  
10. 147-5852 J [1] RING  
11. 147-5853 J [1] RING  
12. 165-9288 J [1] SEAL-LIP TYPE  
13. 170-9846 J [1] SEAL-BUFFER  
14. 7Y-4620 [1] HEAD  
15. 7Y-4628 J [1] RING (BACKUP)  
16. 7Y-4631 [1] RING-RETAINING  
17. 087-5005 [1] STOP  
18. 095-0929 [2] RING-RETAINING (EXTERNAL)  
19. 095-1631 J [1] SEAL-O-RING  
20. 103-8378 [1] RING-RETAINING  
21. 103-8379 [1] RING  
22. 103-8380 [1] STOP  
23. 7Y-4633 J [1] RING-BACKUP  
24. 7Y-5216 M [8] BOLT-SOCKET HEAD (M20X2.5X80-MM)  
   
    AVAILABLE REPAIR KIT(S):
  266-7812 J KIT-SEAL (STICK CYLINDER)  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBP48640319
 

227-6218: DRIVE GP-SWING

227-6218 DRIVE GP-SWING -WITHOUT MOTOR
S/N BZH1-UP; DAY1-UP
PART OF 283-4745 DRIVE GP-SWING
i02740254 SEBP4864
2276218 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 319D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-7238 [1] VALVE-SHUTOFF  
2. 7Y-1434 [1] SPACER (40X69.5X6-MM THK)  
3. 093-1729 [2] RING-RETAINING  
4. 094-0584 [6] WASHER (40.3X72X1-MM THK)  
5. 094-0611 [6] WASHER (47.3X76X1-MM THK)  
6. 094-1509 [3] SHAFT-PLANETARY  
7. 114-1581 [1] SPACER (57.5X74X6-MM THK)  
8. 148-4632 [1] GEAR-SUN (23-TEETH)  
9. 148-4633 [3] GEAR-PLANETARY (25-TEETH)  
10. 148-4634 [3] SHAFT-PLANETARY  
11. 148-4635 [1] GEAR-RING (73-TEETH)  
12. 148-4637 [1] CARRIER-PLANETARY  
13. 148-4638 [1] HOUSING  
14. 148-4640 [1] RING-RETAINING  
15. 148-4642 [1] SEAL-O-RING  
16. 148-4732 [1] GEAR-SUN (20-TEETH)  
17. 148-4733 [3] GEAR-PLANETARY (26-TEETH)  
18. 171-9383 [1] SPACER  
19. 191-2578 [1] CARRIER-PLANETARY  
20. 199-4561 [2] SEAL-LIP TYPE  
21. 227-6228 [1] CAGE  
22. 267-6736 [1] SHAFT-PINION  
23. 199-4582 [3] BEARING AS  
24. 095-0886 [3] PIN-SPRING  
25. 095-0891 [3] PIN-SPRING  
26. 095-1022 [1] BEARING-ROLLER  
27. 148-4643 [1] BEARING  
28. 3K-0360 [1] SEAL-O-RING  
29. 7Y-0252 [6] BEARING AS-ROLLER  
30. 8T-4183 M [6] BOLT (M12X1.75X40-MM)  
31. 8T-4223 [6] WASHER-HARD (13.5X25.5X3-MM THK)  
  M   METRIC PART
 

Information:

Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Service Letter-Americas
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING THE HYDRAULIC CYLINDER RODS ON CERTAIN 319D EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING THE HYDRAULIC CYLINDER RODS ON CERTAIN 319D EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE HYDRAULIC CYLINDERS ON CERTAIN 319D EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE HYDRAULIC CYLINDERS ON CERTAIN 319D EXCAVATORS
Technical Information Bulletin
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Specifications
Boom Cylinder Lines
319D Excavator Machine System Specifications
Boom Cylinder
319D Excavator Machine System Specifications
Bucket Cylinder
319D Excavator Machine System Specifications
Bucket Cylinder
319D Excavator Machine System Specifications
Boom Cylinder
319D Excavator Machine System Specifications
Stick Cylinder
319D Excavator Machine System Specifications
Boom Cylinder Lines
319D Excavator Machine System Specifications
Boom Lines
319D Excavator Machine System Specifications
Boom Cylinder Lines
319D Excavator Machine System Specifications
Boom Cylinder
319D Excavator Machine System Specifications
Stick Cylinder
319D Excavator Machine System Specifications
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Systems Operation
Cylinders (Boom, Stick and Bucket)
319D Excavator Hydraulic System
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Testing and Adjusting
Cylinder Drift - Check - Empty Bucket
319D Excavator Hydraulic System
Cylinder Drift - Check - Loaded Bucket
319D Excavator Hydraulic System
Cylinder Speed - Check
319D Excavator Hydraulic System
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Disassembly and Assembly
Stick Cylinder - Remove and Install
315D, 318D and 319D Excavators Machine Systems
Boom Cylinder - Remove and Install
315D, 318D and 319D Excavators Machine Systems
Bucket Cylinder - Remove and Install
315D, 318D and 319D Excavators Machine Systems
Service Magazine
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2013/02/28
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2011/10/17
Correct Ring Orientation Provides Smooth Hydraulic Cylinder Operation {5456, 5458}
2009/03/16
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30
Service Limit of the Bushings At the Front Linkages Are Now Available on Certain Excavators {5456, 5457, 5458, 6060, 6301, 6302, 6460, 6501, 6502, 6516, 6521, 6535, 6536}
Service Limit of the Bushings At the Front Linkages Are Now Available on Certain Excavators {5456, 5457, 5458, 6060, 6301, 6302, 6460, 6501, 6502, 6516, 6521, 6535, 6536}
Improved Pin Assemblies and Bushings for the Boom, the Stick, and the Bucket Pin Joints Are Now Used on Certain Excavators and Mobile Hydraulic Power Units {5456, 5457, 5458, 6501, 6502, 6513}
2013/06/20

Caterpillar Parts SIS Catalog 319D :

CYLINDER & SEAL GP-HYDRAULIC
279-8709 CYLINDER & SEAL GP-HYDRAULIC
CYLINDER & SEAL GP-HYDRAULIC
279-8709 CYLINDER & SEAL GP-HYDRAULIC
CYLINDER & SEAL GP-BUCKET
259-0858 CYLINDER & SEAL GP-BUCKET
CYLINDER & SEAL GP-BUCKET
259-0855 CYLINDER & SEAL GP-BUCKET
CYLINDER & SEAL GP-BOOM
259-0849 CYLINDER & SEAL GP-BOOM
CYLINDER & LINES GP-STICK
291-0397 CYLINDER & LINES GP-STICK
259-0851 CYLINDER & LINES GP-STICK
259-0857 CYLINDER & LINES GP-BUCKET
CYLINDER GP-BOOM
259-0850 CYLINDER GP-BOOM
CYLINDER GP-BUCKET
259-0856 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
259-0859 CYLINDER GP-BUCKET
CYLINDER GP-COUPLER
169-0329 CYLINDER GP-COUPLER
CYLINDER GP-COUPLER
172-8402 CYLINDER GP-COUPLER
CYLINDER GP-HYDRAULIC
279-5614 CYLINDER GP-HYDRAULIC
CYLINDER GP-HYDRAULIC
360-5447 CYLINDER GP-HYDRAULIC
CYLINDER GP-STICK
259-0853 CYLINDER GP-STICK

Truck sale:

CATERPILLAR 319D 2008
 
CATERPILLAR 319D 2008
- TRACK EXCAVATORS
BERGERAT MONNOYEUR
117 RUE CHARLES MICHELS - ST DENIS -
CATERPILLAR 319D 2008
 
CATERPILLAR 319D 2008
- TRACK EXCAVATORS
BERGERAT MONNOYEUR
117 RUE CHARLES MICHELS - ST DENIS -
CATERPILLAR 319D 2011
 
CATERPILLAR 319D 2011
- TRACK EXCAVATORS
BERGERAT MONNOYEUR
117 RUE CHARLES MICHELS - ST DENIS -
 
 
CATERPILLAR 319D 2011
- TRACK EXCAVATORS
BERGERAT MONNOYEUR
117 RUE CHARLES MICHELS - ST DENIS -
 
 
CATERPILLAR 319D 2012
- TRACK EXCAVATORS
BERGERAT MONNOYEUR
117 RUE CHARLES MICHELS - ST DENIS -
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.