251-0432 WIRING GP-CAB S/N B6H1-UP; JLP1-UP PART OF 274-7468, 284-1605 CAB GP AN ATTACHMENT 330D L EXCAVATOR

ELECTRICAL AND STARTING SYSTEM

WIRING GP

0. 251-0432 WIRING GP-
1. 259-5118 WIRING GP-
2. 267-7642 WIRING GP-
3. 306-8349 WIRING GP-
4. 267-7748 WIRING GP-
5. 275-7194 WIRING GP-
6. 275-7194 WIRING GP-
7. 267-7803 WIRING GP-
8. 267-7804 WIRING GP-
9. 231-1836 WIRING GP-
0. INFORMATION

EXCAVATOR 330D L EXCAVATOR B6H
330D L Excavators B6H00001-UP (MACHINE) POWERED BY C9 Engine SEBP4865 330D L B6H (2006)

ELECTRICAL AND STARTING SYSTEM

WIRING GP

259-5340 WIRING GP-AUXILIARY CONTROL

251-0432 WIRING GP-CAB

259-5118 WIRING GP-CAB

267-7642 WIRING GP-CAB

306-8349 WIRING GP-CAB

#SEBP48650310

251-0432: WIRING GP-CAB

WIRING GP-CAB

251-0432 WIRING GP-CAB
S/N B6H1-UP; JLP1-UP
PART OF 274-7468, 284-1605 CAB GP
AN ATTACHMENT

i04372319 SEBP4865

For full view, you need register

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093 C	[1]	STRAP-CABLE
2.	7Y-5505	[2]	SPEAKER AS
			(EACH INCLUDES)
	7Y-3951	[2]	TERMINAL-BLADE (14-GA)
	7Y-3954	[1]	CONNECTOR-PLUG (3-PIN)
3.	9W-0335	[1]	LIGHTER AS-CIGAR (24-VOLT)
			-OR-
	238-2318	[1]	LIGHTER AS-CIGAR (24-VOLT)
4.	099-7127 M	[8]	SCREW-MACHINE (M4X0.7X12-MM)
5.	102-8016	[1]	RESISTOR AS (BACKUP)
6.	113-8490	[22]	FUSE (10-AMPERE)
7.	113-8491	[5]	FUSE (15-AMPERE)
8.	113-8493	[3]	FUSE (25-AMPERE)
9.	116-0210	[4]	BRACKET AS
10.	124-3548	[2]	FUSE (30-AMPERE)
11.	132-1829 Y	[1]	ALARM GP (24-VOLT)
12.	141-2759	[8]	FUSE (5-AMPERE)
13.	161-3128	[1]	RELAY (24-VOLT)(BOOM FLOODLIGHT)
13A.	161-3128	[1]	RELAY (24-VOLT)(CHASSIS LIGHT)
13B.	161-3128	[1]	RELAY (24-VOLT)(CAB FLOODLIGHT)
13C.	161-3128	[1]	RELAY (24-VOLT)(HORN)
13D.	161-3128	[1]	RELAY (24-VOLT)(NEUTRAL START)
13E.	161-3128	[1]	RELAY (24-VOLT)(TRAVEL ALARM)
13F.	161-3128	[1]	RELAY (24-VOLT)(ETHER)
14.	366-4622	[1]	KIT-SERVICE METER (32-VOLT DC)
			(INCLUDES SERVICE METER & FILM)
15.	163-6758	[1]	WIRE AS
16.	167-3593	[1]	STRAP
17.	170-6888	[1]	PULLER-FUSE
18.	213-0772	[1]	SWITCH AS-MAGNETIC (24-VOLT)
19.	227-7575	[1]	PANEL-CONTROL (SWITCH)
20.	234-1097	[1]	BRACKET
21.	238-2212	[1]	SWITCH AS-ROCKER (FINE SWING)
	167-3542	[1]	RECEPTACLE-CONNECTOR (5-PIN)
	167-3543	[5]	TERMINAL (MALE)
23.	238-2390	[1]	CABLE AS (RED)
	6V-2369 D		CABLE (4-GA, BLACK)(0.3-M)
	9G-4343	[2]	TERMINAL-RING (4-GA, 1/4-IN SCREW)
24.	238-2391	[1]	CABLE AS (PURPLE)
	6V-2369 D		CABLE (4-GA, BLACK)(0.3-M)
	9G-4343	[2]	TERMINAL-RING (4-GA, 1/4-IN SCREW)
25.	245-7760	[8]	INSULATION
26.	251-0637	[1]	INSULATION
27.	259-4883	[1]	ANTENNA AS
28.	350-8251 C	[1]	HARNESS AS-CAB
	102-8803	[3]	KIT-RECEPTACLE (3-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[6]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	3S-2093	[111]	STRAP-CABLE
	7Y-3950	[4]	TERMINAL-BLADE (14-GA TO 20-GA)
	7Y-3951	[11]	TERMINAL-BLADE (14-GA)
	7Y-3952	[3]	PLUG-CONNECTOR (2-PIN)
	7Y-3955	[2]	CONNECTOR-RECEPTACLE
	7Y-3958	[1]	CONNECTOR-PLUG (6-PIN)
	7Y-3962	[2]	TERMINAL-BULLET (MALE)
	7Y-3963	[11]	TERMINAL-BULLET (FEMALE)
	8C-6354	[1]	CAP-RECEPTACLE (ET CONNECTOR)
	8T-8737	[22]	PLUG-SEAL
	5P-6271	[1]	CONNECTOR AS
	9W-1951	[1]	RECEPTACLE-CONNECTOR (9-PIN)
	102-7964	[2]	PLUG-CONNECTOR (16-PIN)
	102-7965	[76]	TERMINAL (FEMALE)
	9W-0844	[3]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	111-4816	[1]	PLUG-CONNECTOR (13-PIN)
	116-0255	[1]	TERMINAL-BLADE (10-GA TO 20-GA)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(33-CM)
	121-1022	[2]	DIODE
	121-1168	[1]	CONNECTOR-RECEPTACLE
	121-1173	[13]	TERMINAL (MALE)
	125-4840	[1]	WEDGE-PLUG LOCK (13-PIN)
	125-4841	[2]	WEDGE-PLUG LOCK (21-PIN)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(65-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(25-CM)
	9X-3402	[15]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	2L-8065	[3]	TERMINAL-RING (10-GA TO 12-GA, NO. 8 SCREW)
	2L-8066	[2]	TERMINAL-RING (10-GA TO 12-GA, NO. 10 SCREW)
	2L-8067	[6]	TERMINAL-RING (10-GA TO 12-GA, 1/4-IN SCREW)
	2L-8075	[3]	TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)
	2L-8076	[2]	TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW)
	128-8950	[1]	CONNECTOR-RECEPTACLE
	5P-2321	[1]	TERMINAL-FORK (14-GA TO 16-GA, NO. 6 SCREW)
	176-9299	[2]	KIT-RECEPTACLE (3-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	134-3296	[1]	HOUSING-PLUG
	134-3297	[1]	SEAL
	9X-3401	[12]	PIN-CONNECTOR (16-GA TO 18-GA)
	149-5069	[8]	TERMINAL-BLADE (14-GA TO 20-GA)
	149-5070	[16]	TERMINAL-BLADE (16-GA TO 20-GA)
	149-5071	[8]	TERMINAL-BLADE (12-GA TO 14-GA)
	153-2602	[5]	RECEPTACLE-CONNECTOR (1-PIN)
	153-2631	[5]	TERMINAL (14-GA TO 20-GA)
	155-2270	[2]	KIT-CONNECTING PLUG (2-PIN)
			(EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	163-6659	[1]	CONNECTOR-PLUG (12-PIN)
	163-6699	[1]	CONNECTOR-PLUG (18-PIN)
	163-6790	[23]	TERMINAL (FEMALE)
	163-6803	[8]	PLUG-CONNECTOR (5-PIN)
	167-3487	[8]	WEDGE-PLUG LOCK (5-PIN)
	167-3630	[1]	CONNECTOR-PLUG
	167-3631	[2]	TERMINAL (FEMALE)
	170-6890	[5]	TERMINAL-BLADE (14-GA)
	170-6891	[22]	TERMINAL-BLADE (16-GA TO 18-GA)
	174-3016	[2]	PLUG AS-CONNECTOR (3-PIN)
	230-4009	[1]	PLUG AS-CONNECTOR (12-PIN)
	264-7034	[1]	SEAL-CONNECTOR
	230-4011	[1]	PLUG AS-CONNECTOR (2-PIN)
	264-7029	[1]	SEAL-CONNECTOR
	230-4013	[1]	PLUG AS-CONNECTOR (3-PIN)
	264-7030	[1]	SEAL-CONNECTOR
	238-2319	[1]	BASE AS (FUSE, RELAY PANEL)
	9X-8256	[1]	WASHER (6.6X12X2-MM THK)
	095-0742 M	[1]	SCREW-MACHINE (M6X1X16-MM)
	170-9394	[40]	TERMINAL
	238-2363	[6]	TERMINAL (FEMALE)
	238-2366	[10]	TERMINAL (MALE)
	239-7356	[1]	PLUG AS-CONNECTOR (12-PIN)
	264-7034	[1]	SEAL-CONNECTOR
	243-4505	[2]	RECEPTACLE AS-CONNECTOR (2-PIN)
	243-4506	[1]	RECEPTACLE AS-CONNECTOR (3-PIN)
	349-5084	[3]	TERMINAL-BLADE
	349-5085	[3]	RECEPTACLE AS-CONNECTOR
29.	095-0723 M	[3]	SCREW-SPECIAL (M3X0.5X10-MM)
30.	096-5962	[3]	WASHER-HARD (3.4X7X0.8-MM THK)
31.	096-6166	[2]	WASHER-HARD (4.5X9X1-MM THK)
32.	132-5789	[7]	CLIP (LADDER)
33.	163-6795	[15]	STRAP-CABLE
34.	4P-7581	[1]	CLIP (LADDER)
35.	5C-2890 M	[3]	NUT (M6X1-THD)
36.	6V-5210 M	[8]	SCREW-MACHINE (M4X0.7X10-MM)
37.	6V-9672 M	[2]	SCREW-MACHINE (M4X0.7X16-MM)
38.	8T-0328	[3]	WASHER-HARD (5.5X10X1-MM THK)
39.	8T-4127 M	[2]	SCREW-MACHINE (M5X0.8X20-MM)
40.	8T-6693 M	[1]	SCREW-MACHINE (M5X0.8X16-MM)
41.	9X-2042 M	[11]	SCREW-TRUSS HEAD (M6X1X12-MM)
42.	9X-2044 M	[5]	SCREW-TRUSS HEAD (M6X1X16-MM)
43.	9X-8256	[3]	WASHER (6.6X12X2-MM THK)
44.	101-2846 E		GUARD (9.5-CM)
44A.	101-2846 E		GUARD (9-CM EACH)
45.	7K-1181 C	[8]	STRAP-CABLE
	C		CHANGE FROM PREVIOUS TYPE
	D		ORDER BY THE METER
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP48650311

259-5118: WIRING GP-CAB

WIRING GP-CAB

259-5118 WIRING GP-CAB -PRIMING PUMP
S/N B6H1-UP; JLP1-UP
PART OF 247-7501 PUMP GP-FUEL PRIMING
AN ATTACHMENT

i02506658 SEBP4865

For full view, you need register

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[5]	STRAP-CABLE
2.	7K-1181	[9]	STRAP-CABLE
3.	149-5050	[1]	RELAY (24-VOLT)(PRIMING PUMP)
4.	259-5119	[1]	HARNESS AS-CAB (PRIMING PUMP)
	3S-2093	[2]	STRAP-CABLE
	230-5008	[1]	PLUG AS-CONNECTOR (4-PIN)
	243-4505	[1]	RECEPTACLE AS-CONNECTOR (2-PIN)
5.	5C-2890 M	[1]	NUT (M6X1-THD)
6.	9X-8256	[1]	WASHER (6.6X12X2-MM THK)
	M		METRIC PART

#SEBP48650312

267-7642: WIRING GP-CAB

WIRING GP-CAB

267-7642 WIRING GP-CAB -COUPLER
S/N B6H1-UP; JLP1-UP
PART OF 268-6821 CONTROL AR-COUPLER
AN ATTACHMENT

i02663229 SEBP4865

For full view, you need register

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7K-1181	[13]	STRAP-CABLE
2.	149-5050	[1]	RELAY (24-VOLT)(QUICK COUPLER LOCK PRIORITY)
2A.	149-5050	[1]	RELAY (24-VOLT)(QUICK COUPLER LOCK ON)
2B.	149-5050	[1]	RELAY (24-VOLT)(QUICK COUPLER LOCK)
2C.	149-5050	[1]	RELAY (24-VOLT)(QUICK COUPLER LOCK)
3.	259-4884	[1]	BRACKET AS
4.	259-7220	[1]	COVER
5.	267-7644	[1]	HARNESS AS-QUICK COUPLER
	102-7965	[3]	TERMINAL (FEMALE)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(15-CM)
	149-5070	[9]	TERMINAL-BLADE (16-GA TO 20-GA)
	163-6803	[1]	PLUG-CONNECTOR (5-PIN)
	230-5008	[1]	PLUG AS-CONNECTOR (4-PIN)
	7Y-3950	[2]	TERMINAL-BLADE (14-GA TO 20-GA)
	7Y-3953	[1]	CONNECTOR-RECEPTACLE
	149-5069	[7]	TERMINAL-BLADE (14-GA TO 20-GA)
	3S-2093	[15]	STRAP-CABLE
	230-5008	[1]	PLUG AS-CONNECTOR (4-PIN)
6.	267-7671	[1]	SWITCH GP-TOGGLE (QUICK COUPLER)
	105-5175	[1]	SWITCH AS-TOGGLE (QUICK COUPLER)
	3L-8187	[6]	LOCKWASHER
	6T-3631	[2]	NUT-HEX (15/32-32-THD)
	6T-3632	[1]	LOCKWASHER
	6T-3633	[1]	RING-LOCKING
	6V-8374	[6]	SCREW-MACHINE (6-32X0.25-IN)
	267-7672	[1]	HARNESS AS-WIRING (QUICK COUPLER SWITCH)
	3S-2093	[1]	STRAP-CABLE
	121-1173	[3]	TERMINAL (MALE)
	167-3542	[1]	RECEPTACLE-CONNECTOR (5-PIN)
7.	267-7676	[1]	BRACKET AS
8.	9X-2042 M	[7]	SCREW-TRUSS HEAD (M6X1X12-MM)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP48650313

306-8349: WIRING GP-CAB

WIRING GP-CAB

306-8349 WIRING GP-CAB -GRADE CONTROL
S/N B6H1-UP; JLP1-UP
PART OF 290-1780 CONVERSION AR-MACHINE
AN ATTACHMENT

i02825093 SEBP4865

For full view, you need register

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7K-1181	[7]	STRAP-CABLE
2.	113-8491	[1]	FUSE (15-AMPERE)
3.	306-8350	[1]	HARNESS AS-CAB

#SEBP48650314

267-7748: WIRING GP-CHASSIS

WIRING GP-CHASSIS

267-7748 WIRING GP-CHASSIS -QUICK COUPLER
S/N B6H1-UP; JLP1-UP
PART OF 268-6821 CONTROL AR-COUPLER
AN ATTACHMENT

i02663242 SEBP4865

For full view, you need register

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[21]	STRAP-CABLE
2.	7K-1181	[22]	STRAP-CABLE
3.	204-1611	[2]	STRAP (DUAL)
4.	267-7830	[1]	HARNESS AS-QUICK COUPLER
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	155-2270	[3]	KIT-CONNECTING PLUG (2-PIN)
			(EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	243-4507	[1]	RECEPTACLE AS-CONNECTOR (4-PIN)
5.	4P-7581	[1]	CLIP (LADDER)
6.	8T-4121	[1]	WASHER-HARD (11X21X2.5-MM THK)
7.	8T-4136 M	[1]	BOLT (M10X1.5X25-MM)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP48650315

275-7194: WIRING GP-CHASSIS

WIRING GP-CHASSIS

275-7194 WIRING GP-CHASSIS -GRADE CONTROL
S/N B6H1-UP; JLP1-UP
PART OF 290-1780 CONVERSION AR-MACHINE
Type 1
AN ATTACHMENT

i02819831 SEBP4865

For full view, you need register

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7K-1181	[44]	STRAP-CABLE
2.	177-7707	[2]	BOSS
3.	275-6841 Y	[1]	HARNESS AS-CONTROL (BODY TILT SENSOR, GPS RECEIVER)
4.	275-6842 Y	[1]	HARNESS AS-CONTROL (DISPLAY, GPS RADIO)
5.	279-7609	[1]	BRACKET AS
6.	306-8361	[1]	HARNESS AS-CONTROL (ACCUGRADE READY)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	3R-9965	[1]	PLUG AS-CONNECTOR (8-PIN)
	3S-2093	[1]	STRAP-CABLE
	6D-5257	[1]	PLUG AS-CONNECTOR (8-PIN)
	8L-8413	[3]	STRAP-CABLE (WHITE)
	104-6871	[1]	CAP-DUST
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(40-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(50-CM)
	134-2540	[1]	RECEPTACLE AS-CONNECTOR (3-PIN)
	155-2260	[2]	KIT-CONNECTING PLUG (3-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	230-4009	[3]	PLUG AS-CONNECTOR (12-PIN)
	231-2295	[1]	PLUG AS-CONNECTOR (8-PIN)
	243-4510	[1]	RECEPTACLE AS-CONNECTOR (12-PIN)
	243-5362	[1]	CAP-DUST
	253-2695	[1]	PLUG AS-CONNECTOR
	272-5000	[1]	RECEPTACLE AS-CONNECTOR (12-PIN)
7.	132-5789	[1]	CLIP (LADDER)
8.	2S-1647	[2]	GROMMET
9.	4P-7428	[1]	CLIP (LADDER)
10.	4P-7581	[1]	CLIP (LADDER)
11.	8T-4121	[2]	WASHER-HARD (11X21X2.5-MM THK)
12.	8T-4191 M	[2]	BOLT (M10X1.5X16-MM)
13.	8T-4223	[2]	WASHER-HARD (13.5X25.5X3-MM THK)
14.	8T-4648 M	[2]	BOLT (M12X1.75X70-MM)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP48650316

275-7194: WIRING GP-CHASSIS

WIRING GP-CHASSIS

275-7194 WIRING GP-CHASSIS -GRADE CONTROL
S/N B6H1-UP; JLP1-UP
PART OF 290-1780 CONVERSION AR-MACHINE
Type 2
AN ATTACHMENT

i04047441 SEBP4865

For full view, you need register

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7K-1181	[44]	STRAP-CABLE
2.	177-7707	[2]	BOSS
3.	275-6841 Y	[1]	HARNESS AS-CONTROL (BODY TILT SENSOR, GPS RECEIVER)
4.	275-6842 Y	[1]	HARNESS AS-CONTROL (DISPLAY, GPS RADIO)
5.	279-7609	[1]	BRACKET AS
6.	364-0233 C	[1]	HARNESS AS-CONTROL
	3R-9965	[1]	PLUG AS-CONNECTOR (8-PIN)
	3S-2093	[1]	STRAP-CABLE
	6D-5257	[1]	PLUG AS-CONNECTOR (8-PIN)
	8L-8413	[3]	STRAP-CABLE (WHITE)
	8T-8737	[18]	PLUG-SEAL
	104-6871	[2]	CAP-DUST
	9W-0844	[3]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(40-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(50-CM)
	9X-3402	[32]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	2L-8069	[1]	TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW)
	134-2540	[2]	RECEPTACLE AS-CONNECTOR (3-PIN)
	9X-3401	[21]	PIN-CONNECTOR (16-GA TO 18-GA)
	174-0503	[2]	KIT-CONNECTING PLUG (3-PIN)
	155-2260	[2]	KIT-CONNECTING PLUG (3-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	230-4009	[3]	PLUG AS-CONNECTOR (12-PIN)
			(EACH INCLUDES)
	264-7034	[1]	SEAL-CONNECTOR
	231-2295	[1]	PLUG AS-CONNECTOR (8-PIN)
	264-7033	[1]	SEAL-CONNECTOR
	243-4510	[1]	RECEPTACLE AS-CONNECTOR (12-PIN)
	243-5362	[1]	CAP-DUST
	253-2695	[1]	PLUG AS-CONNECTOR
	272-5000	[1]	RECEPTACLE AS-CONNECTOR (12-PIN)
7.	132-5789	[1]	CLIP (LADDER)
8.	2S-1647	[2]	GROMMET
9.	4P-7428	[1]	CLIP (LADDER)
10.	4P-7581	[1]	CLIP (LADDER)
11.	8T-4121	[2]	WASHER-HARD (11X21X2.5-MM THK)
12.	8T-4191 M	[2]	BOLT (M10X1.5X16-MM)
13.	8T-4223	[2]	WASHER-HARD (13.5X25.5X3-MM THK)
14.	8T-4648 M	[2]	BOLT (M12X1.75X70-MM)
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP48650317

267-7803: WIRING GP-COMMUNICATION

WIRING GP-COMMUNICATION

267-7803 WIRING GP-COMMUNICATION -PRODUCT LINK 321SR
S/N B6H1-UP; JLP1-UP
PART OF 264-8552, 314-3533 INSTALLATION AR-COMMUNICATION
AN ATTACHMENT

i02517303 SEBP4865

2677803 WIRING GP-COMMUNICATION Parts scheme

For full view, you need register

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[7]	STRAP-CABLE
2.	4I-7889	[1]	SPACER (11X25X45-MM THK)
3.	7K-1181	[8]	STRAP-CABLE
4.	9X-3495	[1]	CLIP AS
	8C-3334	[2]	RIVET-TUBULAR
5.	116-0118	[3]	CLIP
6.	259-4887 Y	[1]	HARNESS AS-WIRING (PRODUCT LINK)
7.	259-4940 Y	[1]	HARNESS AS-WIRING (SERVICE CONNECTOR)
8.	267-7813	[1]	HARNESS AS-CONTROL (PRODUCT LINK, ANTENNA)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	230-5010	[1]	PLUG AS-CONNECTOR (6-PIN)
	243-4508	[1]	RECEPTACLE AS-CONNECTOR (6-PIN)
9.	111-4837	[1]	CLIP
10.	132-5789	[2]	CLIP (LADDER)
11.	8T-4121	[3]	WASHER-HARD (11X21X2.5-MM THK)
12.	8T-4136 M	[2]	BOLT (M10X1.5X25-MM)
13.	8T-4191 M	[2]	BOLT (M10X1.5X16-MM)
14.	8T-5005 M	[1]	BOLT (M10X1.5X70-MM)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP48650318

267-7804: WIRING GP-COMMUNICATION

WIRING GP-COMMUNICATION

267-7804 WIRING GP-COMMUNICATION -PRODUCT LINK 121SR
S/N B6H1-UP; JLP1-UP
PART OF 264-8553 INSTALLATION AR-COMMUNICATION
AN ATTACHMENT

i02517109 SEBP4865

2677804 WIRING GP-COMMUNICATION Parts scheme

For full view, you need register

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[7]	STRAP-CABLE
2.	4I-7889	[1]	SPACER (11X25X45-MM THK)
3.	7K-1181	[8]	STRAP-CABLE
4.	9X-3495	[1]	CLIP AS
	8C-3334	[2]	RIVET-TUBULAR
6.	116-0118	[2]	CLIP
7.	259-4940	[1]	HARNESS AS-WIRING (SERVICE CONNECTOR)
	243-4508	[1]	RECEPTACLE AS-CONNECTOR (6-PIN)
8.	267-7813	[1]	HARNESS AS-CONTROL (PRODUCT LINK, ANTENNA)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	230-5010	[1]	PLUG AS-CONNECTOR (6-PIN)
	243-4508	[1]	RECEPTACLE AS-CONNECTOR (6-PIN)
9.	132-5789	[1]	CLIP (LADDER)
10.	8T-4121	[1]	WASHER-HARD (11X21X2.5-MM THK)
11.	8T-4185 M	[1]	BOLT (M10X1.5X50-MM)
	091-9035	[1]	SPACER (11X25X20-MM THK)
			-OR-
	8T-4136 M	[1]	BOLT (M10X1.5X25-MM)
12.	8T-4191 M	[1]	BOLT (M10X1.5X16-MM)
13.	8T-5005 M	[1]	BOLT (M10X1.5X70-MM)
	M		METRIC PART

#SEBP48650319

231-1836: WIRING GP-CONSOLE

WIRING GP-CONSOLE

231-1836 WIRING GP-CONSOLE -LH
S/N B6H1-UP; JLP1-UP
PART OF 274-7465 CONSOLE GP-OPERATOR, 251-0433 WIRING GP-CONSOLE

i02490120 SEBP4865

For full view, you need register

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[2]	STRAP-CABLE
2.	7K-1181	[1]	STRAP-CABLE
3.	163-6795	[2]	STRAP-CABLE
4.	251-0580	[1]	HARNESS AS-CONSOLE
	8T-8729	[4]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[3]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	3S-2093	[9]	STRAP-CABLE
	5P-5995 D		TUBE (0.3-M)
	7Y-3963	[2]	TERMINAL-BULLET (FEMALE)
	7Y-3965	[2]	TUBE (RECEPTACLE TERMINAL)
	8T-8737	[9]	PLUG-SEAL
	9W-0852	[2]	PIN-CONNECTOR (14-GA TO 16-GA)
	9W-0844	[2]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)
	9X-3402	[11]	SOCKET-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1768	[11]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	230-4011	[1]	PLUG AS-CONNECTOR (2-PIN)
	264-7029	[1]	SEAL-CONNECTOR
	230-5010	[1]	PLUG AS-CONNECTOR (6-PIN)
	264-7032	[1]	SEAL-CONNECTOR
	239-7352	[1]	PLUG AS-CONNECTOR (6-PIN)
	264-7032	[1]	SEAL-CONNECTOR
	243-4505	[1]	RECEPTACLE AS-CONNECTOR (2-PIN)
	243-4508	[1]	RECEPTACLE AS-CONNECTOR (6-PIN)
	247-2693	[1]	RECEPTACLE AS-CONNECTOR (6-PIN)
	D		ORDER BY THE METER
	E		ORDER BY THE CENTIMETER

Information:

ELECTRICAL AND STARTING SYSTEM

WIRING GP

Engine News

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13

Operation and Maintenance Manual

Battery Disconnect Switch
330D and 336D Excavators

Battery or Battery Cable - Inspect/Replace
330D and 336D Excavators

Battery - Recycle
330D and 336D Excavators

SmartBoom Operation - If Equipped
330D and 336D Excavators

SmartBoom Control - If Equipped
330D and 336D Excavators

Power Receptacle - If Equipped
330D and 336D Excavators

Fuses - Replace
330D and 336D Excavators

Special Instruction

Installation of 183-9371 Coupler Lines Gp (KIT, WEDGE LOCK){1408, 5000, 5051, 5057, 6129, 7000, 7332}
Installation of 183-9371 Coupler Lines Gp (KIT, WEDGE LOCK){1408, 5000, 5051, 5057, 6129, 7000, 7332}

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Ampseal 16 Connector Peripheral Seal Servicing{7553}
Ampseal 16 Connector Peripheral Seal Servicing{7553}

Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}

Installation of 279-5323 Coupler Lines Gp (KIT, PIN GRABBER){1408, 5057, 5479, 6129, 7000, 7332}
Installation of 279-5323 Coupler Lines Gp (KIT, PIN GRABBER){1408, 5057, 5479, 6129, 7000, 7332}

Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}

Selecting the Correct Part Numbers for Sensors and Connectors{1439, 7553}
Selecting the Correct Part Numbers for Sensors and Connectors{1439, 7553}

Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}

Troubleshooting Guide for 161-3128 Relay on Certain Excavators{1408, 7301}
Troubleshooting Guide for 161-3128 Relay on Certain Excavators{1408, 7301}

Selecting Correct Part Numbers For Sensors and Adapter Harnesses for Certain Machines and Engines{1408, 1439}
Selecting Correct Part Numbers For Sensors and Adapter Harnesses for Certain Machines and Engines{1408, 1439}

Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}

Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}

Procedure for Installing the 373-8980 Console Harness As on Certain Excavators{1408, 5258}
Procedure for Installing the 373-8980 Console Harness As on Certain Excavators{1408, 5258}

DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}

Procedure to Troubleshoot the Upper Window Wiper Relay on Certain 311D through 349D, E Series, and F Series Excavators{1408, 7305}
Procedure to Troubleshoot the Upper Window Wiper Relay on Certain 311D through 349D, E Series, and F Series Excavators{1408, 7305}

Technical Information Bulletin

Failed Service Meters{7478}
Failed Service Meters{7478}

Wrong Resistor May be Installed into <NOBR>176-9668</NOBR> Instrument Console Gp on Certain Excavators and Wheel Loaders {1408, 1437, 6129}
Wrong Resistor May be Installed into 176-9668 Instrument Console Gp on Certain Excavators and Wheel Loaders {1408, 1437, 6129}

Specifications

Wiring (Air Inlet Heater)
C9 Engines for Caterpillar Built Machines

Tool Operating Manual

Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Systems Operation

Relays
320D, 320D2, 321D, 323D, 324D, 325D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators Tool Control System

Senders
320D, 320D2, 321D, 323D, 324D, 325D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators Tool Control System

Sensors
320D, 320D2, 321D, 323D, 324D, 325D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators Tool Control System

Switches
320D, 320D2, 321D, 323D, 324D, 325D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators Tool Control System

Switches
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Sensors
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Caterpillar Machines

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Testing and Adjusting

Electric Starting System - Test
C9 Engines for Caterpillar Built Machines

Electrical Connector - Inspect
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Wiring Harness (Open Circuit) - Test
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Wiring Harness (Short Circuit) - Test
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

System Schematic
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Electrical Connector - Inspect
AccuGrade^® GPS (CD700)

Wiring Harness (Open Circuit) - Test
AccuGrade^® GPS (CD700)

Wiring Harness (Short Circuit) - Test
AccuGrade^® GPS (CD700)

Overload Warning - Set - If Equipped
330D, 336D and 340D Excavators Hydraulic System

Connector Contact Description
AccuGrade^® GPS (CD700)

Electrical Connector - Inspect
AccuGrade^® GPS / Single UTS / Site and Laser Reference v11 for Excavators

Wiring Harness (Open Circuit) - Test
AccuGrade^® GPS / Single UTS / Site and Laser Reference v11 for Excavators

Wiring Harness (Short Circuit) - Test
AccuGrade^® GPS / Single UTS / Site and Laser Reference v11 for Excavators

Connector Contact Description
AccuGrade^® GPS / Single UTS / Site and Laser Reference v11 for Excavators

Electrical Connector - Inspect
Product Link - PL522/523

Wiring Harness (Open Circuit) - Test
Product Link - PL522/523

Wiring Harness (Short Circuit) - Test
Product Link - PL522/523

Electrical Connector - Inspect
Product Link 121S/300

Wiring Harness (Open Circuit) - Test
Product Link 121S/300

Wiring Harness (Short Circuit) - Test
Product Link 121S/300

System Schematic
Machine Security System (MSS3i) Integrated

Troubleshooting

Electrical Connectors - Inspect
C7 and C9 Engines for Caterpillar Built Machines

CID 0100 FMI 04 Engine Oil Pressure short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0174 FMI 04 Fuel Temperature short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0274 FMI 04 Atmospheric Pressure short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines

CID 0110 FMI 04 Engine Coolant Temperature short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0164 FMI 03 Injector Actuation Pressure voltage high
C7 and C9 Engines for Caterpillar Built Machines

CID 0091 FMI 08 Throttle Position signal abnormal
C7 and C9 Engines for Caterpillar Built Machines

CID 0617 FMI 05 Air Inlet Heater Relay open/current below normal
C7 and C9 Engines for Caterpillar Built Machines

CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines

CID 0164 FMI 04 Injector Actuation Pressure voltage low
C7 and C9 Engines for Caterpillar Built Machines

CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines

Fuel Filter Differential Pressure Switch Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

Engine Wiring Information
C7 and C9 Engines for Caterpillar Built Machines

CID 2417 FMI 05 Ether Injection Control Solenoid current low
C7 and C9 Engines for Caterpillar Built Machines

CID 2417 FMI 06 Ether Injection Control Solenoid current high
C7 and C9 Engines for Caterpillar Built Machines

Digital Sensor Supply Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
C7 and C9 Engines for Caterpillar Built Machines

CID 1785 FMI 03 Intake Manifold Pressure Sensor voltage high
C7 and C9 Engines for Caterpillar Built Machines

CID 1785 FMI 04 Intake Manifold Pressure Sensor voltage low
C7 and C9 Engines for Caterpillar Built Machines

CID 0172 FMI 04 Intake Manifold Air Temp short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0342 FMI 08 Secondary Engine Speed signal abnormal
C7 and C9 Engines for Caterpillar Built Machines

CID 0617 FMI 06 Air Inlet Heater Relay grounded/current above norm
C7 and C9 Engines for Caterpillar Built Machines

Air Inlet Heater Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

Engine Pressure Sensor Open or Short Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines

MID 039 - CID 0096 - FMI 05
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0096 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0586 - FMI 05
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0586 - FMI 12
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0588 - FMI 09
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1178 - FMI 03
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1178 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1178 - FMI 08
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 2280 - FMI 03
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

CID 0174 FMI 03 Fuel Temperature open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines

Sensors and Electrical Connectors
C7 and C9 Engines for Caterpillar Built Machines

Throttle Switch Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

Low Engine Oil Pressure Lamp Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

Electrical Component and Connector Locations
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0110 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0110 - FMI 09
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 2300 - FMI 09
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0600 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

CID 0190 FMI 08 Engine Speed signal abnormal
C7 and C9 Engines for Caterpillar Built Machines

CID 1785 FMI 10 Intake Manifold Pressure Signal abnormal rate of change
C7 and C9 Engines for Caterpillar Built Machines

Electrical Power Supply
AccuGrade^® GPS (CD700)

CAN Data Link - Test
AccuGrade^® GPS (CD700)

CAN Data Link - Test
AccuGrade^® GPS / Single UTS / Site and Laser Reference v11 for Excavators

MID 122 - CID 0269 - FMI 03
Product Link 121S/300

MID 122 - CID 0269 - FMI 04
Product Link 121S/300

Service Magazine

Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04

Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13

Investigation of the Liquid Level Switch on the Engine Oil Pan and on the Hydraulic Tank for Excavators {1302, 1408, 5056, 5068, 7422}
2006/11/13

Troubleshooting the Rotary Switch Assembly for the Engine Speed {1408, 7332}
2008/08/18