AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

169-0753 CYLINDER GP-COUPLER -LOCK S/N B6H1-UP; JLP1-UP 70-MM (2.8-IN) BORE X 130-MM (5.1-IN) STROKE PART OF 209-3464 LOCK GP-QUICK COUPLER AN ATTACHMENT 330D L


HYDRAULIC SYSTEM
CYLINDER GP
DRIVE GP

EXCAVATOR 330D L EXCAVATOR B6H
 330D L Excavators B6H00001-UP (MACHINE) POWERED BY C9 Engine SEBP4865 330D L B6H   (2006)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER GP-BUCKET
357-9766 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
357-9784 CYLINDER GP-BUCKET
CYLINDER GP-COUPLER
169-0753 CYLINDER GP-COUPLER
CYLINDER GP-HYDRAULIC
327-0338 CYLINDER GP-HYDRAULIC
CYLINDER GP-STICK
234-4601 CYLINDER GP-STICK
CYLINDER GP-STICK
289-8031 CYLINDER GP-STICK
 

#SEBP48650510
 

169-0753: CYLINDER GP-COUPLER

169-0753 CYLINDER GP-COUPLER -LOCK
S/N B6H1-UP; JLP1-UP
70-MM (2.8-IN) BORE X 130-MM (5.1-IN) STROKE
PART OF 209-3464 LOCK GP-QUICK COUPLER
AN ATTACHMENT
i02664263 SEBP4865
1690753 CYLINDER GP-COUPLER Parts scheme
  For full view, you need register

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 169-3923 [1] KIT-VALVE (QUICK COUPLER)  
   
    AVAILABLE REPAIR KIT(S):
  219-1322 [1] KIT-SEAL (QUICK COUPLER LOCK CYLINDER)  
 

#SEBP48650511
 

327-0338: CYLINDER GP-HYDRAULIC

327-0338 CYLINDER GP-HYDRAULIC
S/N B6H1-UP; JLP1-UP
PART OF 265-7514 COUPLER GP-QUICK
AN ATTACHMENT
i03627010 SEBP4865
3270338 CYLINDER GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 091-5928 [2] FITTING-GREASE  
2. 172-8406 [1] VALVE GP-CHECK  
  2U-5338 [1] SEAL-O-RING  
  9W-3340 [1] SEAL-O-RING  
  107-7640 [1] SEAL-O-RING  
   
    AVAILABLE REPAIR KIT(S):
  326-5051 [1] KIT-SEAL (HYDRAULIC CYLINDER)  
    (INCLUDES THREADED 0-RING, BACKUP RING, ROD END O-RING, SEAL ROD END O-RING, WIPER, GLAND SEAL, PISTON SEAL, WEAR RING)
 

#SEBP48650512
 

234-4601: CYLINDER GP-STICK

234-4601 CYLINDER GP-STICK
S/N B6H1-UP; JLP1-UP
170-MM (6.7-IN) BORE X 1738-MM (68.4-IN) STROKE
PART OF 234-4600 CYLINDER & SEAL GP-STICK
AN ATTACHMENT
i02500216 SEBP4865
2344601 CYLINDER GP-STICK Parts scheme
  For full view, you need register

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7Y-4956 M [1] LOCKNUT (M90X2-THD)  
2. 9X-3607 J [1] SEAL AS  
3. 191-5603 [1] PISTON  
4. 191-5604 J [2] RING  
5. 191-5644 [1] BUSHING  
6. 191-5705 [1] STOP  
7. 231-6843 J [1] RING-SEAL  
8. 242-6806 [1] CYLINDER AS  
8A. 241-7342 [1] BUSHING  
9. 242-6811 [1] ROD AS  
9A. 241-7342 [1] BUSHING  
10. 103-8345 [1] RING-RETAINING  
11. 107-6579 [1] RING  
12. 107-6933 [1] STOP  
13. 191-5602 [1] HEAD  
14. 191-5605 J [1] RING  
15. 191-5643 [1] RING-RETAINING  
16. 191-5645 J [1] SEAL-BUFFER  
17. 191-5646 J [1] SEAL-U-CUP  
18. 191-5647 J [1] RING-BACKUP  
19. 191-5648 J [1] SEAL-LIP TYPE  
20. 095-0930 [2] RING-RETAINING (EXTERNAL)  
21. 095-1726 J [1] SEAL-O-RING  
22. 7Y-4945 J [1] RING-BACKUP  
23. 7Y-5239 M [8] BOLT-SOCKET HEAD (M24X3X100-MM)  
   
    AVAILABLE REPAIR KIT(S):
  231-6844 [1] KIT-SEAL (STICK CYLINDER)  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBP48650513
 

289-8031: CYLINDER GP-STICK

289-8031 CYLINDER GP-STICK
S/N B6H1-UP; JLP1-UP
170-MM (6.7-IN) BORE X 1738-MM (68.4-IN) STROKE
PART OF 289-8030 CYLINDER & SEAL GP-STICK
AN ATTACHMENT
i02767093 SEBP4865
2898031 CYLINDER GP-STICK Parts scheme
  For full view, you need register

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7Y-4956 M [1] LOCKNUT (M90X2-THD)  
2. 9X-3607 J [1] SEAL AS  
3. 103-8345 [1] RING-RETAINING  
4. 107-6579 [1] RING  
5. 107-6933 [1] STOP  
6. 191-5603 [1] PISTON  
7. 191-5605 J [1] RING  
8. 231-6843 J [1] RING-SEAL  
9. 289-8032 [1] CYLINDER AS-HYDRAULIC  
9A. 241-7342 [1] BUSHING  
10. 289-8037 [1] ROD AS  
10A. 241-7342 [1] BUSHING  
11. 191-5602 [1] HEAD  
12. 191-5604 J [2] RING  
13. 191-5643 [1] RING-RETAINING  
14. 191-5645 J [1] SEAL-BUFFER  
15. 191-5647 J [1] RING-BACKUP  
16. 191-5648 J [1] SEAL-LIP TYPE  
17. 191-5705 [1] STOP  
18. 095-0930 [2] RING-RETAINING (EXTERNAL)  
19. 095-1726 J [1] SEAL-O-RING  
20. 191-5644 [1] BUSHING  
21. 191-5646 J [1] SEAL-U-CUP  
22. 7Y-4945 J [1] RING-BACKUP  
23. 7Y-5239 M [8] BOLT-SOCKET HEAD (M24X3X100-MM)  
   
    AVAILABLE REPAIR KIT(S):
  231-6844 J [1] KIT-SEAL (STICK CYLINDER)  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP48650514
 

375-1722: CYLINDER GP-STICK

375-1722 CYLINDER GP-STICK
S/N B6H1-UP; JLP1-UP
170-MM (6.7-IN) BORE X 1738-MM (68.4-IN) STROKE
PART OF 357-4702 CYLINDER & SEAL GP-STICK
AN ATTACHMENT
i05357309 SEBP4865
3751722 CYLINDER GP-STICK Parts scheme
  For full view, you need register

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7Y-4956 M [1] LOCKNUT (M90X2-THD)  
2. 103-8345 [1] RING-RETAINING  
3. 107-6579 [1] RING  
4. 191-5644 [1] BUSHING  
5. 191-5648 J [1] SEAL-LIP TYPE  
6. 231-6843 J [1] RING-SEAL  
7. 324-9484 J [1] SEAL-BUFFER  
8. 324-9486 J [1] SEAL-U-CUP  
9. 357-4704 [1] CYLINDER AS  
9A. 290-9183 [1] BUSHING  
10. 357-4713 [1] ROD AS  
10A. 290-9183 [1] BUSHING  
11. 358-8525 [1] PISTON  
12. 375-1723 [1] HEAD  
13. 359-7188 [1] STOP  
14. 359-7192 [1] STOP  
15. 095-0930 [2] RING-RETAINING (EXTERNAL)  
16. 140-0240 J [1] SEAL-O-RING  
17. 191-5604 J [2] RING  
18. 191-5605 J [1] RING  
19. 191-5643 [1] RING-RETAINING  
20. 191-5647 J [1] RING-BACKUP  
21. 375-1732 J [2] RING-BACKUP  
22. 7Y-5239 M [8] BOLT-SOCKET HEAD (M24X3X100-MM)  
23. 506-2322 J [1] SEAL AS  
   
    AVAILABLE REPAIR KIT(S):
  518-5137 J [1] KIT-SEAL (STICK CYLINDER)  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP48650515
 

234-4620: DRIVE GP-AUXILIARY PUMP

234-4620 DRIVE GP-AUXILIARY PUMP -ACCESSORY DRIVE
S/N B6H1-UP; JLP1-UP
PART OF 270-8795 CONTROL AR-AUXILIARY
AN ATTACHMENT
i02567636 SEBP4865
2344620 DRIVE GP-AUXILIARY PUMP Parts scheme
  For full view, you need register

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 295-9441 Y [1] DRIVE GP-AUXILIARY PUMP (ACCESSORY DRIVE)  
2. 108-1781 M [8] BOLT-SOCKET HEAD (M12X1.75X35-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP48650516
 

295-9441: DRIVE GP-AUXILIARY PUMP

295-9441 DRIVE GP-AUXILIARY PUMP -ACCESSORY DRIVE
S/N B6H1-UP; JLP1-UP
PART OF 234-4620 DRIVE GP-AUXILIARY PUMP
AN ATTACHMENT
i02834142 SEBP4865
2959441 DRIVE GP-AUXILIARY PUMP Parts scheme
  For full view, you need register

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5I-8754 [3] SPACER-BEARING (35X45X3-MM THK)  
2. 170-9964 [1] BEARING  
3. 2W-1145 [1] RING-RETAINING (INTERNAL)  
4. 206-9298 [1] SEAL-O-RING  
5. 8T-9597 [1] RING-RETAINING  
6. 236-6919 [1] SEAL-O-RING  
7. 8H-5352 [2] BALL BEARING  
8. 8T-9080 M [2] BOLT-SOCKET HEAD (M12X1.75X20-MM)  
9. 249-6670 [1] SEAL-O-RING  
10. 225-4517 [1] PLATE  
11. 8T-4944 M [3] BOLT-SOCKET HEAD (M16X2X40-MM)  
  M   METRIC PART
 

#SEBP48650517
 

199-4538: DRIVE GP-SWING

199-4538 DRIVE GP-SWING -WITH MOTOR
S/N B6H1-UP; JLP1-UP
PART OF 191-2576 POWER TRAIN AR
i01666894 SEBP4865
1994538 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 200-3372 Y [1] MOTOR & MTG GP-SWING  
2. 199-4539 Y [1] DRIVE GP-SWING (WITHOUT MOTOR)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP48650518
 

199-4539: DRIVE GP-SWING

199-4539 DRIVE GP-SWING -WITHOUT MOTOR
S/N B6H1-321; JLP1-101
PART OF 199-4538 DRIVE GP-SWING
i01681328 SEBP4865
1994539 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 148-4602 [4] GEAR-PLANETARY (24-TEETH)  
2. 094-1528 [8] WASHER (53X84X1-MM THK)  
3. 148-4608 [4] SHAFT-PLANETARY  
4. 114-1399 [1] PIPE-GAUGE  
5. 148-4600 [1] GEAR-SUN (17-TEETH)  
6. 7I-7684 M [2] SPACER (50X79.6X6-MM THK)  
7. 114-1398 [1] GAUGE-OIL LEVEL (SWING DRIVE)  
8. 199-4540 [1] COVER-HOUSING  
9. 096-1441 [1] RING-RETAINING  
10. 093-1730 [1] RING-RETAINING  
11. 148-4601 [1] GEAR-SUN (17-TEETH)  
12. 191-2511 [1] CARRIER-PLANETARY  
13. 114-1322 [1] RING-RETAINING  
14. 148-4607 [1] CARRIER-PLANETARY  
15. 148-4604 [1] GEAR-RING (67-TEETH)  
16. 1U-8846 B SEALANT-GASKET  
17. 171-9413 [1] SPACER (140.5X160X103.2-MM THK)  
18. 110-7149 [1] RING-RETAINING  
19. 9U-8693 [1] BEARING-ROLLER  
20. 7I-7619 [1] BEARING-ROLLER  
21. 128-9170 [2] SEAL-LIP TYPE  
22. 148-4605 [1] SHAFT-PINION  
23. 7I-7611 [1] CAGE  
24. 8T-4183 M [10] BOLT (M12X1.75X40-MM)  
25. 8T-4223 [10] WASHER-HARD (13.5X25.5X3-MM THK)  
26. 5M-4454 [1] SEAL-O-RING  
27. 191-2524 [1] HOUSING  
28. 6V-7238 [1] VALVE-SHUTOFF  
29. 3K-0360 [1] SEAL-O-RING  
30. 148-4611 [8] WASHER (71.3X112X1-MM THK)  
31. 191-2514 [8] BEARING AS  
32. 148-4609 [4] SHAFT-PLANETARY  
33. 148-4603 [4] GEAR-PLANETARY (24-TEETH)  
34. 099-5194 [8] PIN-SPRING  
35. 8T-6383 M [24] BOLT (M16X2X200-MM)  
36. 9X-8257 [24] WASHER (17.5X30X3.5-MM THK)  
37. 191-2513 [4] BEARING AS-ROLLER  
38. 231-6864 [1] BREATHER AS  
  093-5150 [1] COUPLING-PIPE  
  114-8234 [1] BREATHER (SWING DRIVE)  
  231-6969 [1] NIPPLE-PIPE  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP48650519
 

199-4539: DRIVE GP-SWING

199-4539 DRIVE GP-SWING -WITHOUT MOTOR
S/N B6H322-UP; JLP102-UP
PART OF 199-4538 DRIVE GP-SWING
i02640927 SEBP4865
1994539 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 148-4602 [4] GEAR-PLANETARY (24-TEETH)  
2. 094-1528 [8] WASHER (53X84X1-MM THK)  
3. 148-4608 [4] SHAFT-PLANETARY  
4. 114-1399 [1] PIPE-GAUGE  
5. 148-4600 [1] GEAR-SUN (17-TEETH)  
6. 7I-7684 M [2] SPACER (50X79.6X6-MM THK)  
7. 114-1398 [1] GAUGE-OIL LEVEL (SWING DRIVE)  
8. 199-4540 [1] COVER-HOUSING  
9. 096-1441 [1] RING-RETAINING  
10. 093-1730 [1] RING-RETAINING  
11. 148-4601 [1] GEAR-SUN (17-TEETH)  
12. 191-2511 [1] CARRIER-PLANETARY  
13. 114-1322 [1] RING-RETAINING  
14. 148-4607 [1] CARRIER-PLANETARY  
15. 148-4604 [1] GEAR-RING (67-TEETH)  
16. 1U-8846 B SEALANT-GASKET  
17. 171-9413 [1] SPACER (140.5X160X103.2-MM THK)  
18. 110-7149 [1] RING-RETAINING  
19. 9U-8693 [1] BEARING-ROLLER  
20. 7I-7619 [1] BEARING-ROLLER  
21. 128-9170 [2] SEAL-LIP TYPE  
22. 148-4605 [1] SHAFT-PINION  
23. 7I-7611 [1] CAGE  
24. 8T-4183 M [10] BOLT (M12X1.75X40-MM)  
25. 8T-4223 [10] WASHER-HARD (13.5X25.5X3-MM THK)  
26. 5M-4454 [1] SEAL-O-RING  
27. 191-2524 [1] HOUSING  
28. 6V-7238 [1] VALVE-SHUTOFF  
29. 3K-0360 [1] SEAL-O-RING  
30. 148-4611 [8] WASHER (71.3X112X1-MM THK)  
31. 191-2514 [8] BEARING AS  
32. 148-4609 [4] SHAFT-PLANETARY  
33. 148-4603 [4] GEAR-PLANETARY (24-TEETH)  
34. 099-5194 [8] PIN-SPRING  
35. 8T-6383 M [24] BOLT (M16X2X200-MM)  
36. 9X-8257 [24] WASHER (17.5X30X3.5-MM THK)  
37. 191-2513 [4] BEARING AS-ROLLER  
38. 227-6221 C [1] BREATHER AS (SWING DRIVE)  
38A. 227-6215 [1] BOSS (1/4-18-THD)  
38B. 4H-6112 [1] BREATHER (SWING DRIVE)  
38C. 267-6785 [1] PIPE  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

Information:

Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING THE 234-4601 CYLINDER GROUP ON CERTAIN 330D EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING THE 234-4601 CYLINDER GROUP ON CERTAIN 330D EXCAVATORS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
Discoloration of the Hydraulic Cylinder Rod on Certain Excavators{5102, 5456, 5457, 5458, 5468, 7562}
Discoloration of the Hydraulic Cylinder Rod on Certain Excavators{5102, 5456, 5457, 5458, 5468, 7562}
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Low Cycle Cylinder Rod Breaks on Certain Excavators and Mobile Hydraulic Power Units{7562}
Low Cycle Cylinder Rod Breaks on Certain Excavators and Mobile Hydraulic Power Units{7562}
Bucket Cylinder Rod Breaking at the Rod Eye to Rod Transition Area on Certain 330D, 336D, 336E, 345D, 349D, and 349E Excavators{5457}
Bucket Cylinder Rod Breaking at the Rod Eye to Rod Transition Area on Certain 330D, 336D, 336E, 345D, 349D, and 349E Excavators{5457}
Specifications
Boom Cylinder Lines
330D, 336D, 336D2, 340D and 340D2 Excavators Machine System Specifications
Boom Lines
330D, 336D, 336D2, 340D and 340D2 Excavators Machine System Specifications
Boom Cylinder
330D, 336D, 336D2, 340D and 340D2 Excavators Machine System Specifications
Boom Cylinder Lines
330D, 336D, 336D2, 340D and 340D2 Excavators Machine System Specifications
Bucket Cylinder
330D, 336D, 336D2, 340D and 340D2 Excavators Machine System Specifications
Bucket Cylinder
330D, 336D, 336D2, 340D and 340D2 Excavators Machine System Specifications
Stick Cylinder
330D, 336D, 336D2, 340D and 340D2 Excavators Machine System Specifications
Bucket Cylinder
330D, 336D, 336D2, 340D and 340D2 Excavators Machine System Specifications
Bucket Cylinder
330D, 336D, 336D2, 340D and 340D2 Excavators Machine System Specifications
Stick Cylinder
330D, 336D, 336D2, 340D and 340D2 Excavators Machine System Specifications
Bucket Cylinder
330D, 336D, 336D2, 340D and 340D2 Excavators Machine System Specifications
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Service Letter-China
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING THE 234-4601 CYLINDER GROUP ON CERTAIN 330D EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING THE 234-4601 CYLINDER GROUP ON CERTAIN 330D EXCAVATORS
Service Letter-Asia
Systems Operation
Cylinders (Boom, Stick and Bucket)
330D, 336D and 340D Excavators Hydraulic System
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Service Letter-APD
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING THE 234-4601 CYLINDER GROUP ON CERTAIN 330D EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING THE 234-4601 CYLINDER GROUP ON CERTAIN 330D EXCAVATORS
Testing and Adjusting
Cylinder Drift - Check - Empty Bucket
330D, 336D and 340D Excavators Hydraulic System
Cylinder Speed - Check
330D, 336D and 340D Excavators Hydraulic System
Cylinder Drift - Check - Loaded Bucket
330D, 336D and 340D Excavators Hydraulic System
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Disassembly and Assembly
Stick Cylinder - Remove and Install
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit Machine Systems
Bucket Cylinder - Remove and Install
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit Machine Systems
Boom Cylinder - Remove and Install
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit Machine Systems
Service Magazine
An Improved Cylinder for Certain Pin Grabber Couplers Is Now Used {5362, 6129}
2008/06/30
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2013/02/28
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2011/10/17
Correct Ring Orientation Provides Smooth Hydraulic Cylinder Operation {5456, 5458}
2009/03/16
Cylinder Rod Seals Have Been Improved for Certain Excavators {5457}
2009/07/06
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30
Service Limit of the Bushings At the Front Linkages Are Now Available on Certain Excavators {5456, 5457, 5458, 6060, 6301, 6302, 6460, 6501, 6502, 6516, 6521, 6535, 6536}
2012/05/18
Improved Seal Kits are Now Used on Certain Excavators {5456, 5457, 5458}
2011/11/18
Cat<SUP>&reg;</SUP> Reman Announces the Availability of Remanufactured Hydraulic Rods and Cylinders for Certain Cat Machines {7562}
2015/08/21

Caterpillar Parts SIS Catalog 330D L :

CYLINDER GP-BUCKET
357-9784 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
357-9766 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
289-8041 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
289-8012 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
234-4604 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
225-4581 CYLINDER GP-BUCKET
CYLINDER GP-BOOM
358-5972 CYLINDER GP-BOOM
CYLINDER GP-BOOM
289-8021 CYLINDER GP-BOOM
CYLINDER GP-HYDRAULIC
327-0338 CYLINDER GP-HYDRAULIC
CYLINDER GP-STICK
234-4601 CYLINDER GP-STICK
CYLINDER GP-STICK
289-8031 CYLINDER GP-STICK
CYLINDER GP-STICK
375-1722 CYLINDER GP-STICK
DRIVE GP-AUXILIARY PUMP
234-4620 DRIVE GP-AUXILIARY PUMP
DRIVE GP-AUXILIARY PUMP
295-9441 DRIVE GP-AUXILIARY PUMP
DRIVE GP-SWING
199-4538 DRIVE GP-SWING
DRIVE GP-SWING
199-4539 DRIVE GP-SWING

Truck sale:

Caterpillar 330DL, Construction
130,000 
Caterpillar 330DL, Construction
- Crawler Excavators
WYOMING MACHINERY
 
 
Caterpillar 330DL, Construction
- Crawler Excavators
BERGERAT MONNOYEUR S.A.S.
France
Caterpillar 330DL, Construction
56,700 
Caterpillar 330DL, Construction
- Crawler Excavators
MONARK EQUIPMENT
Philippines
Caterpillar 330DL, Construction
 
Caterpillar 330DL, Construction
- Crawler Excavators
MANTRAC GHANA LIMITED
Ghana
Caterpillar 330DL, Construction
73,710 
Caterpillar 330DL, Construction
- Crawler Excavators
MONARK EQUIPMENT
Philippines
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.