BASIC ENGINE
MOUNTING GP-ENGINECOOLING SYSTEM
FAN GPBASIC ENGINE
MOUNTING GP-STARTING MOTORPAN GP-OIL
PISTON & ROD GP
PULLEY GP
BASIC ENGINE
MOUNTING GP-ENGINE
#SEBP48710060
266-6297: MOUNTING GP-ENGINE
266-6297 MOUNTING GP-ENGINE
S/N MCH1-UP; PHX1-UP
PART OF 287-0132 INSTALLATION AR-ENGINE
S/N MCH1-UP; PHX1-UP
PART OF 287-0132 INSTALLATION AR-ENGINE
For full view, you need register
Parts for your 320D EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 109-9329 | [4] | WASHER (21.5X120X8-MM THK) | |
| 2. | 118-9784 | [2] | BRACKET-REAR | |
| 3. | 118-9785 | [2] | BRACKET-FRONT | |
| 4. | 118-9930 | [4] | SUPPORT AS | |
| 5. | 266-6298 | [2] | MOUNT-RUBBER | |
| 6. | 266-6299 | [2] | MOUNT-RUBBER | |
| 7. | 266-6300 | [2] | MOUNT-RUBBER | |
| 8. | 266-6301 | [2] | MOUNT-RUBBER | |
| 9. | 447-1712 M | [4] | BOLT (M20X2.5X130-MM) | |
| 10. | 451-2176 | [8] | WASHER-HARD (22X35X3.5-MM THK) | |
| 11. | 451-2181 M | [8] | BOLT (M12X1.75X30-MM) | |
| 12. | 453-3447 M | [8] | BOLT (M12X1.75X40-MM) | |
| 13. | 451-2182 | [16] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| M | METRIC PART | |||
#SEBP48710061
279-2847: MOUNTING GP-FAN
279-2847 MOUNTING GP-FAN -REVERSIBLE FAN
S/N PHX1-UP
PART OF 306-1524 FAN AR-REVERSIBLE
AN ATTACHMENT
S/N PHX1-UP
PART OF 306-1524 FAN AR-REVERSIBLE
AN ATTACHMENT
For full view, you need register
Parts for your 320D EXCAVATOR:
CATERPILLAR SIS#SEBP48710062
296-4637: MOUNTING GP-STARTING MOTOR
296-4637 MOUNTING GP-STARTING MOTOR
S/N GDC1-UP
PART OF 305-4882 ENGINE AR, 272-4747, 327-7199 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
S/N GDC1-UP
PART OF 305-4882 ENGINE AR, 272-4747, 327-7199 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
For full view, you need register
Parts for your 320D EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5I-7599 | [1] | SEAL-O-RING | |
| 2. | 135-2369 | [1] | COVER | |
| 3. | 135-2370 M | [1] | BOLT (M5X0.8X25-MM) | |
| 4. | 294-1850 | [1] | WASHER | |
| 5. | 294-1851 | [1] | WASHER | |
| 6. | 272-4774 Y | [1] | STARTING MOTOR GP-ELECTRIC | |
| 7. | 6V-8231 M | [2] | NUT (M10X1.25-THD) | |
| 8. | 7X-0796 | [2] | LOCKWASHER (10.2X18.4X2.5-MM THK) | |
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP48710063
296-4640: PAN GP-OIL
296-4640 PAN GP-OIL
S/N GDC1-UP
PART OF 305-4882 ENGINE AR, 272-4747 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
S/N GDC1-UP
PART OF 305-4882 ENGINE AR, 272-4747 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
For full view, you need register
Parts for your 320D EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 294-1741 | [1] | GUIDE | |
| 2. | 196-8366 | [37] | BOLT | |
| 3. | 199-2178 | [1] | BOLT (M10X1.25X20-MM) | |
| 4. | 125-2968 | [1] | SEAL | |
| 5. | 5I-8067 | [1] | WASHER-SEALING | |
| 6. | 7W-3556 | [1] | WASHER (14.27X20.57X1.5-MM THK) | |
| 7. | 183-8177 | [1] | PLUG | |
| 8. | 183-8176 | [1] | VALVE (ENGINE OIL PAN) | |
| 9. | 294-1742 | [1] | PAN AS | |
| 287-0187 | [1] | BOSS | ||
| 287-0188 | [1] | PLATE | ||
| 287-0189 | [1] | SEAL | ||
| 287-0190 | [1] | BOLT (M8X1.25X16-MM) | ||
| 10. | 213-0677 | [1] | SWITCH AS-LIQUID LEVEL (ENGINE OIL) | |
| 102-8802 | [2] | KIT-RECEPTACLE (2-PIN) | ||
| (EACH INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9X-3401 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 11. | 294-1743 | [1] | GAUGE AS-OIL LEVEL (DIPSTICK) (ENGINE) | |
| 12. | 5I-4993 | [1] | SEAL | |
| 13. | 5I-7666 | [1] | GASKET | |
| 14. | 282-8567 | [1] | BOLT | |
#SEBP48710064
327-7228: PAN GP-OIL
For full view, you need register
Parts for your 320D EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 327-7229 | [1] | GUIDE | |
| 2. | 196-8366 | [37] | BOLT | |
| 3. | 199-2178 | [1] | BOLT (M10X1.25X20-MM) | |
| 4. | 125-2968 | [1] | SEAL | |
| 5. | 5I-8067 | [1] | WASHER-SEALING | |
| 6. | 7W-3556 | [1] | WASHER (14.27X20.57X1.5-MM THK) | |
| 7. | 183-8177 | [1] | PLUG | |
| 8. | 183-8176 | [1] | VALVE | |
| 9. | 294-1742 | [1] | PAN AS | |
| 287-0187 | [1] | BOSS | ||
| 287-0188 | [1] | PLATE | ||
| 287-0189 | [1] | SEAL | ||
| 287-0190 | [4] | BOLT (M8X1.25X16-MM) | ||
| 10. | 213-0677 | [1] | SWITCH AS-LIQUID LEVEL | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 144-1636 | [2] | PIN-CONNECTOR (14-GA TO 18-GA) | ||
| 11. | 327-7247 | [1] | GAUGE-OIL LEVEL (PAN) | |
| 12. | 5I-4993 | [1] | SEAL | |
| 13. | 5I-7666 | [1] | GASKET | |
| 14. | 282-8567 | [1] | BOLT | |
#SEBP48710065
296-4659: PISTON & ROD GP
296-4659 PISTON & ROD GP
S/N GDC1-UP
PART OF 305-4882 ENGINE AR, 272-4747, 327-7199 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
S/N GDC1-UP
PART OF 305-4882 ENGINE AR, 272-4747, 327-7199 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
For full view, you need register
Parts for your 320D EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 324-4235 | [6] | PISTON (STANDARD) | |
| 324-4236 AB | PISTON (0.25-MM OS) | |||
| 324-4237 AB | PISTON (0.5-MM OS) | |||
| 2. | 094-7134 | [6] | PIN | |
| 3. | 5I-7667 | [12] | RING | |
| 4. | 178-6543 J | [6] | SET-PISTON RING (STANDARD) | |
| 178-6544 ABJ | SET-PISTON RING (0.25-MM OS) | |||
| 178-6545 ABJ | SET-PISTON RING (0.5-MM OS) | |||
| 5. | 294-1747 | [6] | ROD AS | |
| (EACH INCLUDES) | ||||
| 5A. | 094-7154 | [2] | BOLT (M12X1.25X85-MM) | |
| 5B. | 094-7516 | [2] | NUT (M12X1.25-THD) | |
| 6. | 294-1748 | [12] | BEARING (STANDARD) | |
| 297-7648 AB | BEARING (0.25-MM US) | |||
| 297-7649 AB | BEARING (0.50-MM US) | |||
| 297-7650 AB | BEARING (0.75-MM US) | |||
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| J | INCLUDES A COMPLETE SET OF RINGS FOR ONE PISTON | |||
#SEBP48710066
296-4660: PULLEY GP-ENGINE
296-4660 PULLEY GP-ENGINE
S/N MCH1-UP; PHX1-UP
PART OF 296-4667 PULLEY GP-ENGINE
AN ATTACHMENT
S/N MCH1-UP; PHX1-UP
PART OF 296-4667 PULLEY GP-ENGINE
AN ATTACHMENT
For full view, you need register
Parts for your 320D EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 266-6332 | [1] | BRACKET | |
| 2. | 266-6333 | [1] | COVER | |
| 3. | 266-6337 | [1] | PULLEY | |
| 4. | 266-6334 | [2] | BEARING | |
| 5. | 212-8596 | [2] | BUSHING | |
| 6. | 266-6335 | [1] | SPACER (40.8X50.8X27-MM THK) | |
| 7. | 266-6336 | [1] | WASHER (13X49X8-MM THK) | |
| 8. | 266-6338 M | [1] | BOLT (M12X1.25X25-MM) | |
| 9. | 294-1726 M | [6] | BOLT (M10X1.5X37-MM) | |
| M | METRIC PART | |||
#SEBP48710067
296-4667: PULLEY GP-ENGINE
296-4667 PULLEY GP-ENGINE
S/N MCH1-UP; PHX1-UP
1.04
PART OF 272-4691, 310-9478, 310-9605, 324-3977, 324-3978 ENGINE AR-COMPLETE
AN ATTACHMENT
S/N MCH1-UP; PHX1-UP
1.04
PART OF 272-4691, 310-9478, 310-9605, 324-3977, 324-3978 ENGINE AR-COMPLETE
AN ATTACHMENT
For full view, you need register
Parts for your 320D EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 212-8584 | [1] | PULLEY | |
| 2. | 324-4225 | [1] | PULLEY AS | |
| 3. | 305-4908 Y | [1] | PULLEY GP-IDLER | |
| 4. | 294-1781 | [1] | BELT-SERPENTINE | |
| 5. | 266-6332 | [1] | BRACKET | |
| 6. | 266-6333 | [1] | COVER | |
| 7. | 266-6337 | [1] | PULLEY | |
| 8. | 266-6334 | [2] | BEARING | |
| 9. | 212-8596 | [2] | BUSHING | |
| 10. | 266-6335 | [1] | SPACER (40.8X50.8X27-MM THK) | |
| 11. | 266-6336 | [1] | WASHER (13X49X8-MM THK) | |
| 12. | 266-6338 M | [1] | BOLT (M12X1.25X25-MM) | |
| 13. | 294-1726 M | [6] | BOLT (M10X1.5X37-MM) | |
| 14. | 213-9433 M | [4] | BOLT (M10X1.5X45-MM) | |
| 296-4660 FY | [1] | PULLEY GP-ENGINE | ||
| F | NOT SHOWN | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP48710068
297-7747: PULLEY GP-ENGINE
297-7747 PULLEY GP-ENGINE
S/N MCH1-198; PHX1-2465
PART OF 272-4689, 310-9604, 324-3966 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
S/N MCH1-198; PHX1-2465
PART OF 272-4689, 310-9604, 324-3966 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
For full view, you need register
Parts for your 320D EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 305-4908 Y | [1] | PULLEY GP-IDLER | |
| 2. | 297-7824 M | [11] | BOLT AS (M10X1.5X35MM) | |
| 3. | 7X-0796 | [6] | LOCKWASHER (10.2X18.4X2.5-MM THK) | |
| 4. | 266-6230 | [1] | SPACER-FAN | |
| 5. | 212-8593 | [1] | PLATE | |
| 6. | 266-6231 M | [6] | BOLT (M10X1.5X120-MM) | |
| 7. | 212-8584 | [1] | PULLEY | |
| 8. | 297-7825 | [1] | BELT-SERPENTINE | |
| 9. | 266-6228 | [1] | COVER | |
| 10. | 222-8371 | [1] | PULLEY AS (DRIVE) | |
| 5I-7540 | [1] | SLEEVE | ||
| 11. | 305-4775 Y | [1] | PULLEY GP-FAN | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP48710069
297-7747: PULLEY GP-ENGINE
297-7747 PULLEY GP-ENGINE
S/N MCH199-UP; PHX2466-UP
PART OF 272-4689, 310-9604, 324-3966, 324-3979 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
S/N MCH199-UP; PHX2466-UP
PART OF 272-4689, 310-9604, 324-3966, 324-3979 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
For full view, you need register
Parts for your 320D EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 305-4908 Y | [1] | PULLEY GP-IDLER | |
| 2. | 297-7824 M | [11] | BOLT AS (M10X1.5X35MM) | |
| 3. | 7X-0796 | [6] | LOCKWASHER (10.2X18.4X2.5-MM THK) | |
| 4. | 266-6230 | [1] | SPACER-FAN | |
| 5. | 212-8593 | [1] | PLATE | |
| 6. | 266-6231 M | [6] | BOLT (M10X1.5X120-MM) | |
| 7. | 212-8584 | [1] | PULLEY | |
| 8. | 297-7825 | [1] | BELT-SERPENTINE | |
| 9. | 266-6228 | [1] | COVER | |
| 10. | 327-7221 | [1] | PULLEY AS | |
| 5I-7540 | [1] | SLEEVE | ||
| 11. | 324-4107 C | [1] | BRACKET | |
| 12. | 255-2873 M | [1] | BOLT AS (M10X1.25X25MM) | |
| 13. | 266-6229 | [1] | PULLEY-FAN DRIVE | |
| 14. | 324-4103 C | [2] | BEARING | |
| 15. | 212-8596 | [2] | BUSHING | |
| 16. | 266-6232 | [1] | SPACER (31.1X38.1X28.4-MM THK) | |
| 17. | 255-2871 | [1] | WASHER (10.5X38X7-MM THK) | |
| 18. | 324-4102 C | [1] | PLATE | |
| 19. | 324-4106 C | [1] | PLATE | |
| 20. | 324-4122 CY | [1] | FAN GP-SUCTION | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
