AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

319-1386 PANEL GP-CIRCUIT BREAKER S/N MCH1-UP; PHX1324-2558 PART OF 259-5176 PANEL & MTG GP-CIRCUIT BREAKER 320D


ELECTRICAL AND STARTING SYSTEM
PANEL GP-CIRCUIT BREAKER
OPERATOR STATION
CONSOLE GP

EXCAVATOR 320D EXCAVATOR MCH
 320D & 320D L Excavators MCH00001-UP (MACHINE) POWERED BY C6.4 Engine SEBP4871 320D MCH   (2006)

ELECTRICAL AND STARTING SYSTEM

PANEL GP-CIRCUIT BREAKER
PANEL & MTG GP-CIRCUIT BREAKER
259-5176 PANEL & MTG GP-CIRCUIT BREAKER
PANEL & MTG GP-CIRCUIT BREAKER
259-5176 PANEL & MTG GP-CIRCUIT BREAKER
PANEL & MTG GP-CIRCUIT BREAKER
328-0040 PANEL & MTG GP-CIRCUIT BREAKER
PANEL GP-CIRCUIT BREAKER
259-5177 PANEL GP-CIRCUIT BREAKER
PANEL GP-CIRCUIT BREAKER
319-1386 PANEL GP-CIRCUIT BREAKER
PANEL GP-CIRCUIT BREAKER
324-5801 PANEL GP-CIRCUIT BREAKER
 

#SEBP48710280
 

319-1386: PANEL GP-CIRCUIT BREAKER

319-1386 PANEL GP-CIRCUIT BREAKER
S/N MCH1-UP; PHX1324-2558
PART OF 259-5176 PANEL & MTG GP-CIRCUIT BREAKER
i03016159 SEBP4871
3191386 PANEL GP-CIRCUIT BREAKER Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-8320 [1] PLATE-INSTRUCTION (BATTERY)  
2. 7N-0719 Y [1] SWITCH GP-DISCONNECT (BATTERY)  
3. 116-0114 [1] SWITCH AS-MAGNETIC (24-VOLT)(HEATER RELAY)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
4. 121-1023 [1] BLOCK-TERMINAL  
5. 171-2208 [1] CIRCUIT BREAKER AS (60-AMPERE)(ALTERNATOR)  
  8T-0122 [2] NUT-FULL (1/4-28-THD)  
  4E-5724 [2] WASHER (7X12X1-MM THK)  
  253-2111 [2] LOCKWASHER  
6. 197-4330 [1] CONTROLLER-AIR (HEATER)  
7. 216-4970 [1] CIRCUIT BREAKER AS (120-AMPERE)(HEATER)  
  8T-0122 [2] NUT-FULL (1/4-28-THD)  
  4E-5724 [2] WASHER (7X12X1-MM THK)  
  253-2111 [2] LOCKWASHER  
8. 234-1037 [1] WIRE AS  
9. 234-1038 [1] WIRE AS  
10. 238-2279 [1] BAR-BUS  
11. 238-2280 [1] WIRE AS  
12. 238-2324 [1] CABLE AS  
  9G-4343 [2] TERMINAL-RING (4-GA, 1/4-IN SCREW)  
  6V-2369 D CABLE (4-GA, BLACK)(0.2-M)  
  125-7876 E TUBE-HEAT SHRINK (17.78-MM DIA)(4-CM)  
13. 238-2325 [1] CABLE AS  
  6V-2369 D CABLE (4-GA, BLACK)(0.3-M)  
  9G-4343 [2] TERMINAL-RING (4-GA, 1/4-IN SCREW)  
  125-7876 E TUBE-HEAT SHRINK (17.78-MM DIA)(4-CM)  
14. 251-0303 [1] CABLE AS  
  6V-2369 D CABLE (4-GA, BLACK)(0.2-M)  
  9G-4343 [2] TERMINAL-RING (4-GA, 1/4-IN SCREW)  
  125-7876 E TUBE-HEAT SHRINK (17.78-MM DIA)(4-CM)  
15. 251-0304 [1] CABLE AS  
  6V-2369 D CABLE (4-GA, BLACK)(0.2-M)  
  9G-4343 [2] TERMINAL-RING (4-GA, 1/4-IN SCREW)  
  125-7876 E TUBE-HEAT SHRINK (17.78-MM DIA)(4-CM)  
16. 259-5274 Y [1] SWITCH GP-MAGNETIC (24-VOLT)(START RELAY)  
17. 291-7547 [1] BRACKET AS  
18. 319-1344 [1] BRACKET AS  
19. 319-1346 [1] COVER AS  
20. 171-2210 [1] CIRCUIT BREAKER AS (80-AMPERE)(MAIN)  
  8T-0122 [2] NUT-FULL (1/4-28-THD)  
  4E-5724 [2] WASHER (7X12X1-MM THK)  
  253-2111 [2] LOCKWASHER  
21. 5C-2890 M [2] NUT (M6X1-THD)  
22. 5C-9553 M [5] BOLT (M6X1X16-MM)  
23. 5P-4115 [4] WASHER-HARD (7.2X19X2-MM THK)  
24. 6V-5645 [6] SCREW-MACHINE (10-32X0.87-IN)  
25. 7X-2619 M [2] BOLT (M6X1X10-MM)  
26. 8T-0328 [6] WASHER-HARD (5.5X10X1-MM THK)  
27. 8T-4171 M [4] BOLT (M6X1X12-MM)  
28. 8T-4970 M [6] BOLT (M6X1X14-MM)  
29. 9X-8256 [15] WASHER (6.6X12X2-MM THK)  
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP48710281
 

324-5801: PANEL GP-CIRCUIT BREAKER

324-5801 PANEL GP-CIRCUIT BREAKER
S/N PHX2559-UP
PART OF 328-0040 PANEL & MTG GP-CIRCUIT BREAKER
i03137880 SEBP4871
3245801 PANEL GP-CIRCUIT BREAKER Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-8320 [1] PLATE-INSTRUCTION (BATTERY)  
2. 3S-2093 [1] STRAP-CABLE  
3. 7N-0719 Y [1] SWITCH GP-DISCONNECT (BATTERY)  
4. 121-1023 [1] BLOCK-TERMINAL  
5. 141-2759 [1] FUSE (5-AMPERE)  
6. 171-2208 [1] CIRCUIT BREAKER AS (60-AMPERE)(ALTERNATOR)  
  6V-8187 [2] NUT (1/4-28-THD)  
  8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
  253-2111 [2] LOCKWASHER  
7. 171-2210 [1] CIRCUIT BREAKER AS (80-AMPERE)(MAIN)  
  6V-8187 [2] NUT (1/4-28-THD)  
  8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
  253-2111 [2] LOCKWASHER  
8. 209-5582 Y [1] SWITCH GP-MAGNETIC (24-VOLT)(AIR INLET HEATER RELAY)  
9. 216-4970 [1] CIRCUIT BREAKER AS (120-AMPERE)(HEATER)  
  6V-8187 [2] NUT (1/4-28-THD)  
  8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
  253-2111 [2] LOCKWASHER  
10. 238-1506 [1] COVER  
11. 238-2279 [1] BAR-BUS  
12. 238-2280 [1] WIRE AS  
13. 251-0303 [1] CABLE AS  
  6V-2369 D CABLE (4-GA, BLACK)(0.2-M)  
  9G-4343 [1] TERMINAL-RING (4-GA, 1/4-IN SCREW)  
  125-7876 BE TUBE-HEAT SHRINK (17.78-MM DIA)  
14. 251-0304 [1] CABLE AS  
  6V-2369 D CABLE (4-GA, BLACK)(0.2-M)  
  9G-4343 [1] TERMINAL-RING (4-GA, 1/4-IN SCREW)  
  125-7876 BE TUBE-HEAT SHRINK (17.78-MM DIA)  
15. 259-5274 Y [1] SWITCH GP-MAGNETIC (24-VOLT)(START RELAY)  
16. 324-5802 [1] BRACKET AS  
17. 324-5804 [1] WIRE AS  
18. 324-5805 [1] WIRE AS  
19. 324-5806 [1] CABLE AS  
  6V-2369 D CABLE (4-GA, BLACK)(0.2-M)  
  9G-4343 [1] TERMINAL-RING (4-GA, 1/4-IN SCREW)  
  5P-3454 [1] TERMINAL-RING (4-GA, 5/16-IN SCREW)  
  125-7876 BE TUBE-HEAT SHRINK (17.78-MM DIA)  
20. 324-5807 [1] CABLE AS  
  6V-2369 D CABLE (4-GA, BLACK)(0.3-M)  
  9G-4343 [1] TERMINAL-RING (4-GA, 1/4-IN SCREW)  
  5P-3454 [1] TERMINAL-RING (4-GA, 5/16-IN SCREW)  
  125-7876 BE TUBE-HEAT SHRINK (17.78-MM DIA)  
21. 324-5808 [1] HOLDER AS-FUSE  
  8T-8737 [1] PLUG-SEAL  
  9W-0852 [1] PIN-CONNECTOR (14-GA TO 16-GA)  
  2L-8078 [1] TERMINAL-RING (14-GA TO 16-GA, 5/16-IN SCREW)  
  243-4505 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
  125-7874 BE TUBE-HEAT SHRINK (5.72-MM DIA)  
22. 156-6175 [1] CLIP (LADDER)  
23. 5C-9553 M [5] BOLT (M6X1X16-MM)  
24. 5P-4115 [4] WASHER-HARD (7.2X19X2-MM THK)  
25. 6V-5645 [6] SCREW-MACHINE (10-32X0.87-IN)  
26. 8T-0328 [6] WASHER-HARD (5.5X10X1-MM THK)  
27. 8T-4171 M [4] BOLT (M6X1X12-MM)  
28. 8T-4970 M [6] BOLT (M6X1X14-MM)  
29. 9X-8256 [11] WASHER (6.6X12X2-MM THK)  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP48710282
 

251-0542: PANEL GP-SWITCH

251-0542 PANEL GP-SWITCH -ENGINE SPEED, START
S/N MCH1-UP; PHX1-UP
CANNOT BE USED WITH @@@@@251-0544@@@@@
AN ATTACHMENT
i02211932 SEBP4871
2510542 PANEL GP-SWITCH Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [4] STRAP-CABLE  
2. 9G-7641 Y [1] SWITCH GP-START (ENGINE, KEY)  
3. 106-0107 Y [1] SWITCH GP-ROTARY (THROTTLE POSITION)  
4. 170-9324 [1] LAMP AS-INDICATOR (24-VOLT, 3-WATT)  
5. 185-9208 [1] KNOB AS (THROTTLE POSITION)  
6. 234-1156 [1] COVER  
7. 234-1158 [1] COVER  
8. 267-7976 [1] PANEL  
9. 251-0543 [1] HARNESS AS-CONSOLE  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  3S-2093 [3] STRAP-CABLE  
  7Y-3951 [2] TERMINAL-BLADE (14-GA)  
  7Y-3952 [1] PLUG-CONNECTOR (2-PIN)  
  7Y-3962 [1] TERMINAL-BULLET (MALE)  
  7Y-3964 [1] TUBE (CONNECTOR TERMINAL)  
  7Y-3963 [1] TERMINAL-BULLET (FEMALE)  
  7Y-3965 [1] TUBE (RECEPTACLE TERMINAL)  
  8T-8737 [3] PLUG-SEAL  
  121-1168 [1] CONNECTOR-RECEPTACLE  
  [14] PLATE  
  9X-3402 [7] SOCKET-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1768 [7] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  2L-8075 [4] TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)  
  153-2540 [10] TERMINAL (FEMALE)  
  153-2541 [1] PLUG-CONNECTOR (10-PIN)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
    (EACH CONNECTING PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  238-2366 [7] TERMINAL (MALE)  
10. 096-6166 [4] WASHER-HARD (4.5X9X1-MM THK)  
11. 119-5026 [4] SCREW-PAN HEAD (10-16X0.63-IN)  
12. 6V-9491 M [4] SCREW-MACHINE (M4X0.7X20-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP48710283
 

251-0542: PANEL GP-SWITCH

251-0542 PANEL GP-SWITCH -ENGINE SPEED, START
S/N MCH1-UP; PHX1-UP
PART OF 314-3906, 314-3907 DISTRIBUTION AR, 314-3866 OPTION AR-MACHINE
Type 1
CANNOT BE USED WITH @@@@@251-0544@@@@@
AN ATTACHMENT
i03098161 SEBP4871
2510542 PANEL GP-SWITCH Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [4] STRAP-CABLE  
2. 9G-7641 Y [1] SWITCH GP-START (ENGINE, KEY)  
3. 319-4420 CY [1] SWITCH GP-ROTARY (THROTTLE POSITION)  
4. 170-9324 [1] LAMP AS-INDICATOR (24-VOLT, 3-WATT)  
5. 185-9208 [1] KNOB AS (THROTTLE POSITION)  
6. 234-1156 [1] COVER  
7. 234-1158 [1] COVER  
8. 267-7976 [1] PANEL  
9. 328-0021 C [1] HARNESS AS-CONSOLE  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECPTACLE AS & WEDGE)
  3S-2093 [3] STRAP-CABLE  
  7Y-3951 [2] TERMINAL-BLADE (14-GA)  
  7Y-3952 [1] PLUG-CONNECTOR (2-PIN)  
  7Y-3962 [1] TERMINAL-BULLET (MALE)  
  7Y-3964 [1] TUBE (CONNECTOR TERMINAL)  
  7Y-3963 [1] TERMINAL-BULLET (FEMALE)  
  7Y-3965 [1] TUBE (RECEPTACLE TERMINAL)  
  8T-8737 [3] PLUG-SEAL  
  121-1168 [1] CONNECTOR-RECEPTACLE  
  121-1173 [14] TERMINAL (MALE)  
  9X-3402 [7] SOCKET-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1768 [7] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  2L-8075 [4] TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)  
  153-2540 [10] TERMINAL (FEMALE)  
  153-2541 [1] PLUG-CONNECTOR (10-PIN)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  230-5010 [1] PLUG AS-CONNECTOR (6-PIN)  
  264-7032 [1] SEAL-CONNECTOR  
  238-2366 [7] TERMINAL (MALE)  
10. 096-6166 [4] WASHER-HARD (4.5X9X1-MM THK)  
11. 119-5026 [4] SCREW-PAN HEAD (10-16X0.63-IN)  
12. 6V-9491 M [4] SCREW-MACHINE (M4X0.7X20-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP48710284
 

251-0542: PANEL GP-SWITCH

251-0542 PANEL GP-SWITCH -ENGINE SPEED, START
S/N MCH1-UP; PHX1-UP
PART OF 314-3906, 314-3907 DISTRIBUTION AR, 314-3866 OPTION AR-MACHINE
Type 2
CANNOT BE USED WITH @@@@@251-0544@@@@@
AN ATTACHMENT
i04407232 SEBP4871
2510542 PANEL GP-SWITCH Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [4] STRAP-CABLE  
2. 255-2751 CY [1] SWITCH GP-START (ENGINE, KEY)  
3. 319-4420 Y [1] SWITCH GP-ROTARY (THROTTLE POSITION)  
4. 170-9324 [1] LAMP AS-INDICATOR (24-VOLT, 3-WATT)  
5. 185-9208 [1] KNOB AS (THROTTLE POSITION)  
6. 234-1156 [1] COVER  
7. 234-1158 [1] COVER  
8. 267-7976 [1] PANEL  
9. 328-0021 [1] HARNESS AS-CONSOLE  
  3S-2093 [3] STRAP-CABLE  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  7Y-3951 [2] TERMINAL-BLADE (14-GA)  
  7Y-3952 [1] PLUG-CONNECTOR (2-PIN)  
  7Y-3962 [1] TERMINAL-BULLET (MALE)  
  7Y-3964 [1] TUBE (CONNECTOR TERMINAL)  
  7Y-3963 [1] TERMINAL-BULLET (FEMALE)  
  7Y-3965 [1] TUBE (RECEPTACLE TERMINAL)  
  8T-8737 [3] PLUG-SEAL  
  121-1168 [1] CONNECTOR-RECEPTACLE  
  121-1173 [14] TERMINAL (MALE)  
  9X-3402 [7] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  2L-8075 [4] TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)  
  153-2540 [10] TERMINAL (FEMALE)  
  153-2541 [1] PLUG-CONNECTOR (10-PIN)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  230-5010 [1] PLUG AS-CONNECTOR (6-PIN)  
  264-7032 [1] SEAL-CONNECTOR  
  238-2366 [7] TERMINAL (MALE)  
10. 096-6166 [4] WASHER-HARD (4.5X9X1-MM THK)  
11. 119-5026 [4] SCREW-PAN HEAD (10-16X0.63-IN)  
12. 6V-9491 M [4] SCREW-MACHINE (M4X0.7X20-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP48710285
 

251-0542: PANEL GP-SWITCH

251-0542 PANEL GP-SWITCH -ENGINE SPEED, START
S/N MCH1-UP; PHX1-UP
PART OF 314-3906, 314-3907 DISTRIBUTION AR, 314-3866 OPTION AR-MACHINE
Type 3
CANNOT BE USED WITH @@@@@251-0544@@@@@
AN ATTACHMENT
i06779689 SEBP4871
2510542 PANEL GP-SWITCH Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [4] STRAP-CABLE  
2. 170-9324 [1] LAMP AS-INDICATOR (24-VOLT, 3-WATT)(OPERATOR CONSOLE)  
3. 185-9208 [1] KNOB AS (THROTTLE POSITION)  
4. 234-1156 [1] COVER  
5. 234-1158 [1] COVER  
6. 255-2751 Y [1] SWITCH GP-START (ENGINE, KEY)  
7. 267-7976 [1] PANEL  
8. 319-4420 Y [1] SWITCH GP-ROTARY (THROTTLE POSITION)  
9. 495-9718 CY [1] HARNESS AS-PANEL  
10. 096-6166 [4] WASHER-HARD (4.5X9X1-MM THK)  
11. 119-5026 [4] SCREW-PAN HEAD (10-16X0.63-IN)  
12. 123-0707 M [4] SCREW-HEX SOCKET (M4X0.7X20-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP48710286
 

251-0544: PANEL GP-SWITCH

251-0544 PANEL GP-SWITCH -ENGINE SPEED, START
S/N MCH1-UP; PHX1-UP
PART OF 227-7581 INSTALLATION GP-SECURITY
Type 1
AN ATTACHMENT
i02397784 SEBP4871
2510544 PANEL GP-SWITCH Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [5] STRAP-CABLE  
2. 9G-7641 Y [1] SWITCH GP-START (ENGINE, KEY)  
3. 106-0107 Y [1] SWITCH GP-ROTARY (THROTTLE POSITION)  
4. 185-9208 [1] KNOB AS  
5. 205-0826 [1] FILM-INSTRUCTION (MACHINE SECURITY, CONSOLE)  
6. 205-8257 [1] COIL AS (EXCITER)  
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
7. 234-1156 [1] COVER  
8. 267-7977 [1] PANEL  
9. 251-0543 [1] HARNESS AS-CONSOLE  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  3S-2093 [3] STRAP-CABLE  
  7Y-3951 [2] TERMINAL-BLADE (14-GA)  
  7Y-3952 [1] PLUG-CONNECTOR (2-PIN)  
  7Y-3962 [1] TERMINAL-BULLET (MALE)  
  7Y-3964 [1] TUBE (CONNECTOR TERMINAL)  
  7Y-3963 [1] TERMINAL-BULLET (FEMALE)  
  7Y-3965 [1] TUBE (RECEPTACLE TERMINAL)  
  8T-8737 [3] PLUG-SEAL  
  121-1168 [1] CONNECTOR-RECEPTACLE  
  [14] PLATE  
  9X-3402 [7] SOCKET-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1768 [7] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  2L-8075 [4] TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)  
  153-2540 [10] TERMINAL (FEMALE)  
  153-2541 [1] PLUG-CONNECTOR (10-PIN)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
    (EACH CONNECTING PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  238-2366 [7] TERMINAL (MALE)  
10. 096-6166 [4] WASHER-HARD (4.5X9X1-MM THK)  
11. 119-5026 [4] SCREW-PAN HEAD (10-16X0.63-IN)  
12. 6V-9491 M [4] SCREW-MACHINE (M4X0.7X20-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP48710287
 

251-0544: PANEL GP-SWITCH

251-0544 PANEL GP-SWITCH -ENGINE SPEED, START
S/N MCH1-UP; PHX1-UP
PART OF 227-7581 INSTALLATION GP-SECURITY
Type 2
AN ATTACHMENT
i03115847 SEBP4871
2510544 PANEL GP-SWITCH Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [5] STRAP-CABLE  
2. 9G-7641 Y [1] SWITCH GP-START (ENGINE, KEY)  
3. 319-4420 CY [1] SWITCH GP-ROTARY (THROTTLE POSITION)  
4. 185-9208 [1] KNOB AS  
5. 205-0826 [1] FILM-INSTRUCTION (MACHINE SECURITY, CONSOLE)  
6. 206-5208 [1] COIL AS (EXCITER)  
7. 234-1156 [1] COVER  
8. 267-7977 [1] PANEL  
9. 328-0021 C [1] HARNESS AS-CONSOLE  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  3S-2093 [3] STRAP-CABLE  
  7Y-3951 [2] TERMINAL-BLADE (14-GA)  
  7Y-3952 [1] PLUG-CONNECTOR (2-PIN)  
  7Y-3962 [1] TERMINAL-BULLET (MALE)  
  7Y-3963 [1] TERMINAL-BULLET (FEMALE)  
  8T-8737 [3] PLUG-SEAL  
  121-1168 [1] CONNECTOR-RECEPTACLE  
  121-1173 [14] TERMINAL (MALE)  
  9X-3402 [7] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  2L-8075 [4] TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)  
  153-2540 [10] TERMINAL (FEMALE)  
  153-2541 [1] PLUG-CONNECTOR (10-PIN)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  230-5010 [1] PLUG AS-CONNECTOR (6-PIN)  
  264-7032 [1] SEAL-CONNECTOR  
  238-2366 [7] TERMINAL (MALE)  
10. 096-6166 [4] WASHER-HARD (4.5X9X1-MM THK)  
11. 119-5026 [4] SCREW-PAN HEAD (10-16X0.63-IN)  
12. 6V-9491 M [4] SCREW-MACHINE (M4X0.7X20-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP48710288
 

251-0544: PANEL GP-SWITCH

251-0544 PANEL GP-SWITCH -ENGINE SPEED, START
S/N MCH1-UP; PHX1-UP
PART OF 227-7581 INSTALLATION GP-SECURITY
Type 3
AN ATTACHMENT
i04407854 SEBP4871
2510544 PANEL GP-SWITCH Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [5] STRAP-CABLE  
2. 255-2751 CJY [1] SWITCH GP-START (ENGINE, KEY)  
3. 319-4420 Y [1] SWITCH GP-ROTARY (THROTTLE POSITION)  
4. 185-9208 [1] KNOB AS  
5. 205-0826 [1] FILM-INSTRUCTION (MACHINE SECURITY, CONSOLE)  
6. 206-5208 [1] COIL AS (EXCITER)  
7. 234-1156 [1] COVER  
8. 267-7977 [1] PANEL  
9. 328-0021 [1] HARNESS AS-CONSOLE  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  3S-2093 [3] STRAP-CABLE  
  7Y-3951 [2] TERMINAL-BLADE (14-GA)  
  7Y-3952 [1] PLUG-CONNECTOR (2-PIN)  
  7Y-3962 [1] TERMINAL-BULLET (MALE)  
  7Y-3964 [1] TUBE (CONNECTOR TERMINAL)  
  7Y-3963 [1] TERMINAL-BULLET (FEMALE)  
  7Y-3965 [1] TUBE (RECEPTACLE TERMINAL)  
  8T-8737 [3] PLUG-SEAL  
  121-1168 [1] CONNECTOR-RECEPTACLE  
  121-1173 [14] TERMINAL (MALE)  
  9X-3402 [7] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  2L-8075 [4] TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)  
  153-2540 [10] TERMINAL (FEMALE)  
  153-2541 [1] PLUG-CONNECTOR (10-PIN)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  230-5010 [1] PLUG AS-CONNECTOR (6-PIN)  
  264-7032 [1] SEAL-CONNECTOR  
  238-2366 [7] TERMINAL (MALE)  
10. 096-6166 [4] WASHER-HARD (4.5X9X1-MM THK)  
11. 119-5026 [4] SCREW-PAN HEAD (10-16X0.63-IN)  
12. 6V-9491 M [4] SCREW-MACHINE (M4X0.7X20-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  J   REQUIRES CORPORATE KEY
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP48710289
 

251-0544: PANEL GP-SWITCH

251-0544 PANEL GP-SWITCH -ENGINE SPEED, START
S/N MCH1-UP; PHX1-UP
PART OF 227-7581 INSTALLATION GP-SECURITY
Type 4
AN ATTACHMENT
i06858545 SEBP4871
2510544 PANEL GP-SWITCH Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [5] STRAP-CABLE  
2. 255-2751 JY [1] SWITCH GP-START (ENGINE, KEY)  
3. 319-4420 Y [1] SWITCH GP-ROTARY (THROTTLE POSITION)  
4. 185-9208 [1] KNOB AS  
5. 205-0826 [1] FILM-INSTRUCTION (MACHINE SECURITY, CONSOLE)  
6. 206-5208 [1] COIL AS (EXCITER)  
7. 234-1156 [1] COVER  
8. 267-7977 [1] PANEL  
9. 495-9718 CY [1] HARNESS AS-PANEL  
10. 096-6166 [4] WASHER-HARD (4.5X9X1-MM THK)  
11. 119-5026 [4] SCREW-PAN HEAD (10-16X0.63-IN)  
12. 123-0707 M [4] SCREW-HEX SOCKET (M4X0.7X20-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  J   REQUIRES CORPORATE KEY
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Troubleshooting
MID 039 - CID 2280 - FMI 03
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Caterpillar Parts SIS Catalog 320D :

PANEL GP-CIRCUIT BREAKER
259-5177 PANEL GP-CIRCUIT BREAKER
PANEL & MTG GP-CIRCUIT BREAKER
328-0040 PANEL & MTG GP-CIRCUIT BREAKER
PANEL & MTG GP-CIRCUIT BREAKER
259-5176 PANEL & MTG GP-CIRCUIT BREAKER
PANEL & MTG GP-CIRCUIT BREAKER
259-5176 PANEL & MTG GP-CIRCUIT BREAKER
339-2038 MOUNTING GP-SENSOR
MOUNTING GP-SENSOR
252-9628 MOUNTING GP-SENSOR
339-2032 MOUNTING GP-MAST
339-2022 MAST GP
PANEL GP-CIRCUIT BREAKER
324-5801 PANEL GP-CIRCUIT BREAKER
PANEL GP-SWITCH
251-0542 PANEL GP-SWITCH
PANEL GP-SWITCH
251-0542 PANEL GP-SWITCH
PANEL GP-SWITCH
251-0542 PANEL GP-SWITCH
PANEL GP-SWITCH
251-0542 PANEL GP-SWITCH
PANEL GP-SWITCH
251-0544 PANEL GP-SWITCH
PANEL GP-SWITCH
251-0544 PANEL GP-SWITCH
PANEL GP-SWITCH
251-0544 PANEL GP-SWITCH

Truck sale:

Caterpillar 320D2
 
Caterpillar 320D2
- Crawler Excavators
THE CHINA ENGINEERS, LTD
Caterpillar 320D2
 
Caterpillar 320D2
- Crawler Excavators
PESA
Caterpillar 320D2, Construction
On Request 
Caterpillar 320D2, Construction
- Crawler Excavators
MONARK EQUIPMENT
Philippines
Caterpillar 320D2, Construction
139,000 USD 
Caterpillar 320D2, Construction
- Crawler Excavators
EMPRESAS MATCO, S.A. DE C.V.
Mexico
CATERPILLAR 320D2 2014
 
CATERPILLAR 320D2 2014
- TRACK EXCAVATORS
PESA
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.