AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

235-8970 CONTROL GP-HANDLE -JOYSTICK, RH S/N MCH1-UP; PHX1-UP PART OF 270-5952, 297-0532 CONTROL GP-JOYSTICK AN ATTACHMENT 320D


OPERATOR STATION
CONTROL GP-HANDLE
AIR CONDITIONER GP
CONTROL GP-HYDRAULIC
CONTROL GP-JOYSTICK

EXCAVATOR 320D EXCAVATOR MCH
 320D & 320D L Excavators MCH00001-UP (MACHINE) POWERED BY C6.4 Engine SEBP4871 320D MCH   (2006)

OPERATOR STATION

CONTROL GP-HANDLE
CONTROL GP-HANDLE
235-8969 CONTROL GP-HANDLE
CONTROL GP-HANDLE
235-8970 CONTROL GP-HANDLE
CONTROL GP-HANDLE
260-2109 CONTROL GP-HANDLE
CONTROL GP-HANDLE
260-2110 CONTROL GP-HANDLE
CONTROL GP-HANDLE
260-2110 CONTROL GP-HANDLE
CONTROL GP-HANDLE
260-2127 CONTROL GP-HANDLE
CONTROL GP-HANDLE
260-2128 CONTROL GP-HANDLE
 

#SEBP48711280
 

235-8970: CONTROL GP-HANDLE

235-8970 CONTROL GP-HANDLE -JOYSTICK, RH
S/N MCH1-UP; PHX1-UP
PART OF 270-5952, 297-0532 CONTROL GP-JOYSTICK
AN ATTACHMENT
i02222110 SEBP4871
2358970 CONTROL GP-HANDLE Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 124-4010 [1] LEVER  
2. 353-2150 [1] BOOT  
3. 245-7844 [1] KNOB AS  
  6I-5298 M [1] SCREW-TAPPING  
  124-4009 [1] SHAFT  
  222-0225 [1] SWITCH AS-PUSH BUTTON (MANUAL LOW IDLE)  
4. 095-0735 M [2] SCREW-MACHINE (M5X0.8X8-MM)  
  M   METRIC PART
 

#SEBP48711281
 

260-2109: CONTROL GP-HANDLE

260-2109 CONTROL GP-HANDLE -JOYSTICK, RH
S/N MCH1-UP; PHX1-UP
2-BUTTON, SLIDE, TRIGGER SW
PART OF 259-7762, 297-0534 CONTROL GP-JOYSTICK
AN ATTACHMENT
i02427052 SEBP4871
2602109 CONTROL GP-HANDLE Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 271-7843 M [1] NUT (M14X2-THD)  
2. 117-8683 [1] PIN-SPRING  
3. 260-2111 [1] LEVER  
4. 297-4589 [1] CONTROL GP-HANDLE (RH)  
  247-2693 [1] RECEPTACLE AS-CONNECTOR (6-PIN)  
  9X-3401 [6] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [6] PIN-CONNECTOR (14-GA TO 16-GA)  
5. 305-0332 [1] BOOT  
  M   METRIC PART
 

#SEBP48711282
 

260-2110: CONTROL GP-HANDLE

260-2110 CONTROL GP-HANDLE -JOYSTICK, LH
S/N MCH1-UP; PHX1-UP
2-BUTTON, SLIDE, TRIGGER SW
PART OF 259-7763, 297-0535 CONTROL GP-JOYSTICK
AN ATTACHMENT
i02427095 SEBP4871
2602110 CONTROL GP-HANDLE Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7Y-8463 M [1] NUT (M14X2-THD)  
2. 117-8683 [1] PIN-SPRING  
3. 260-2111 [1] LEVER  
4. 227-7617 [1] CONTROL GP-HANDLE (LH)  
  9X-3401 [6] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [6] PIN-CONNECTOR (14-GA TO 16-GA)  
  247-2693 [1] RECEPTACLE AS-CONNECTOR (6-PIN)  
5. 240-5067 [1] BOOT  
  M   METRIC PART
 

#SEBP48711283
 

260-2110: CONTROL GP-HANDLE

260-2110 CONTROL GP-HANDLE -JOYSTICK, LH
S/N MCH1-UP; PHX1-UP
2-BUTTON, SLIDE, TRIGGER SW
PART OF 259-7763, 297-0535 CONTROL GP-JOYSTICK
AN ATTACHMENT
i02865875 SEBP4871
2602110 CONTROL GP-HANDLE Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 271-7843 M [1] NUT (M14X2-THD)  
2. 117-8683 [1] PIN-SPRING  
3. 260-2111 [1] LEVER  
4. 297-4590 C [1] CONTROL GP-HANDLE (LH)  
  9X-3401 [6] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [6] PIN-CONNECTOR (14-GA TO 16-GA)  
  247-2693 [1] RECEPTACLE AS-CONNECTOR (6-PIN)  
5. 305-0331 [1] BOOT  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP48711284
 

260-2127: CONTROL GP-HANDLE

260-2127 CONTROL GP-HANDLE -JOYSTICK, RH
S/N MCH1-UP; PHX1-UP
3-BUTTON, TRIGGER SWITCH
PART OF 259-7764, 297-0536 CONTROL GP-JOYSTICK
AN ATTACHMENT
i02425908 SEBP4871
2602127 CONTROL GP-HANDLE Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 271-7843 M [1] NUT (M14X2-THD)  
2. 117-8683 [1] PIN-SPRING  
3. 260-2111 [1] LEVER  
4. 297-4595 [1] CONTROL GP-HANDLE (RH)  
  8T-8737 [2] PLUG-SEAL  
  9X-3401 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [4] PIN-CONNECTOR (14-GA TO 16-GA)  
  247-2693 [1] RECEPTACLE AS-CONNECTOR (6-PIN)  
5. 305-0332 [1] BOOT  
  M   METRIC PART
 

#SEBP48711285
 

260-2128: CONTROL GP-HANDLE

260-2128 CONTROL GP-HANDLE -JOYSTICK, LH
S/N MCH1-UP; PHX1-UP
3-BUTTON, TRIGGER SWITCH
PART OF 259-7765, 297-0537 CONTROL GP-JOYSTICK
AN ATTACHMENT
i02426014 SEBP4871
2602128 CONTROL GP-HANDLE Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 271-7843 M [1] NUT (M14X2-THD)  
2. 117-8683 [1] PIN-SPRING  
3. 305-0331 [1] BOOT  
4. 297-4595 [1] CONTROL GP-HANDLE (LH)  
  8T-8737 [2] PLUG-SEAL  
  9X-3401 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [4] PIN-CONNECTOR (14-GA TO 16-GA)  
  247-2693 [1] RECEPTACLE AS-CONNECTOR (6-PIN)  
5. 260-2111 [1] LEVER  
  M   METRIC PART
 

#SEBP48711286
 

245-7846: CONTROL GP-HEAT & AIR COND

245-7846 CONTROL GP-HEAT & AIR COND -AIR INLET
S/N MCH1-UP; PHX1-UP
PART OF 240-5036, 316-8811, 316-8916 AIR CONDITIONER GP
AN ATTACHMENT
i02400858 SEBP4871
2457846 CONTROL GP-HEAT & AIR COND Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 185-8300 [4] SCREW-TAPPING  
2. 196-1666 [1] RELAY (COMPRESSOR CLUTCH)  
2A. 196-1666 [1] RELAY (BLOWER)  
3. 245-7813 [1] MOTOR AS  
4. 245-7814 [1] BRACKET  
5. 245-7815 [1] SENSOR AS-TEMPERATURE (AIR)  
6. 245-7816 [1] DAMPER AS  
 

#SEBP48711287
 

259-7179: CONTROL GP-HYDRAULIC PEDAL

259-7179 CONTROL GP-HYDRAULIC PEDAL
S/N MCH1-UP; PHX1-UP
PART OF 259-7178 PEDAL AR-AUXILIARY
AN ATTACHMENT
i02344778 SEBP4871
2597179 CONTROL GP-HYDRAULIC PEDAL Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 233-5260 [1] LANYARD  
2. 357-3877 [1] PIN  
3. 135-2274 [1] PEDAL-RUBBER  
4. 164-0614 [1] PEDAL AS  
5. 164-0617 [1] SUPPORT AS  
6. 206-3336 Y [1] VALVE GP-PILOT (THIRD PEDAL, STRAIGHT TRAVEL)  
7. 095-0735 M [2] SCREW-MACHINE (M5X0.8X8-MM)  
8. 7X-2536 M [2] BOLT (M8X1.25X14-MM)  
9. 8T-0114 [1] PIN-SPRING  
10. 8T-4121 [3] WASHER-HARD (11X21X2.5-MM THK)  
11. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
12. 8T-4191 M [1] BOLT (M10X1.5X16-MM)  
13. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP48711288
 

259-7762: CONTROL GP-JOYSTICK

259-7762 CONTROL GP-JOYSTICK -RH
S/N MCH1-UP; PHX1-UP
PART OF 259-7598 CONTROL & MTG GP-JOYSTICK
FIELD REPLACEMENT ORDER @@@@@297-0534@@@@@
AN ATTACHMENT
i02431364 SEBP4871
2597762 CONTROL GP-JOYSTICK Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6K-0806 [1] STRAP-CABLE  
2. 206-3305 Y [1] VALVE GP-PILOT (JOYSTICK)  
3. 260-2109 Y [1] CONTROL GP-HANDLE (JOYSTICK, RH)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP48711289
 

259-7763: CONTROL GP-JOYSTICK

259-7763 CONTROL GP-JOYSTICK -LH
S/N MCH1-UP; PHX1-UP
PART OF 259-7598 CONTROL & MTG GP-JOYSTICK
FIELD REPLACEMENT ORDER @@@@@297-0535@@@@@
AN ATTACHMENT
i02431374 SEBP4871
2597763 CONTROL GP-JOYSTICK Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6K-0806 [1] STRAP-CABLE  
2. 206-3305 Y [1] VALVE GP-PILOT (JOYSTICK)  
3. 260-2110 Y [1] CONTROL GP-HANDLE (JOYSTICK, LH)  
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog 320D :

CONTROL GP-HANDLE
235-8969 CONTROL GP-HANDLE
CONTROL GP-FOOT
239-8696 CONTROL GP-FOOT
CONTROL & MTG GP-PEDAL
221-8884 CONTROL & MTG GP-PEDAL
CONTROL & MTG GP-PEDAL
221-8884 CONTROL & MTG GP-PEDAL
CONTROL & MTG GP-JOYSTICK
310-0078 CONTROL & MTG GP-JOYSTICK
CONTROL & MTG GP-JOYSTICK
259-7707 CONTROL & MTG GP-JOYSTICK
CONTROL & MTG GP-JOYSTICK
259-7599 CONTROL & MTG GP-JOYSTICK
CONTROL & MTG GP-JOYSTICK
259-7599 CONTROL & MTG GP-JOYSTICK
CONTROL GP-HANDLE
260-2109 CONTROL GP-HANDLE
CONTROL GP-HANDLE
260-2110 CONTROL GP-HANDLE
CONTROL GP-HANDLE
260-2110 CONTROL GP-HANDLE
CONTROL GP-HANDLE
260-2127 CONTROL GP-HANDLE
CONTROL GP-HANDLE
260-2128 CONTROL GP-HANDLE
CONTROL GP-HEAT & AIR COND
245-7846 CONTROL GP-HEAT & AIR COND
CONTROL GP-HYDRAULIC PEDAL
259-7179 CONTROL GP-HYDRAULIC PEDAL
CONTROL GP-JOYSTICK
259-7762 CONTROL GP-JOYSTICK

Truck sale:

Caterpillar 320D2
 
Caterpillar 320D2
- Crawler Excavators
THE CHINA ENGINEERS, LTD
Caterpillar 320D2
 
Caterpillar 320D2
- Crawler Excavators
PESA
Caterpillar 320D2, Construction
On Request 
Caterpillar 320D2, Construction
- Crawler Excavators
MONARK EQUIPMENT
Philippines
Caterpillar 320D2, Construction
139,000 USD 
Caterpillar 320D2, Construction
- Crawler Excavators
EMPRESAS MATCO, S.A. DE C.V.
Mexico
CATERPILLAR 320D2 2014
 
CATERPILLAR 320D2 2014
- TRACK EXCAVATORS
PESA
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.