ELECTRICAL AND STARTING SYSTEM
CONTROL GP-GRADEHARNESS GP
ELECTRONICS GP-COMMUNICATION
ELECTRICAL AND STARTING SYSTEM
CONTROL GP-GRADE
#SEBP48740510
339-2026: GRADE CONTROL AR-SATELLITE
339-2026 GRADE CONTROL AR-SATELLITE -DUAL GNSS
S/N KGF1-UP; FAL1-UP
FIELD INSTALLATION
S/N KGF1-UP; FAL1-UP
FIELD INSTALLATION
For full view, you need register
Parts for your 320D EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 324-3309 Y | [1] | MOUNTING GP-MONITOR | ||
| 339-2038 Y | [1] | MOUNTING GP-SENSOR (LINKAGE) | ||
| 339-2044 Y | [1] | SENSOR & MOUNTING GP (ANGLE) | ||
| 204-3461 Y | [1] | WIRING GP-GRADE CONTROL (SENSOR) | ||
| 339-2041 Y | [1] | WIRING GP-GRADE CONTROL (DISPLAY) | ||
| 339-2039 | [1] | MONITOR GP (LIGHT BAR) | ||
| 244-1720 | [3] | MONITOR AS (LIGHT BAR) | ||
| 339-2037 | [1] | MOUNTING GP-SENSOR (CHASSIS) | ||
| [1] | BRACKET AS | |||
| 349-6070 | [1] | CABLE AS (SENSOR) | ||
| 339-2042 | [1] | SENSOR & MOUNTING GP (LINKAGE) | ||
| 265-9492 | [1] | JUNCTION BOX (GPS) | ||
| 312-0754 | [3] | SENSOR AS-ANGLE (AS450C) | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP48740511
339-2029: GRADE CONTROL AR-SATELLITE
339-2029 GRADE CONTROL AR-SATELLITE -SINGLE GNSS
S/N KGF1-UP; FAL1-UP
FIELD INSTALLATION
S/N KGF1-UP; FAL1-UP
FIELD INSTALLATION
For full view, you need register
Parts for your 320D EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 324-3309 Y | [1] | MOUNTING GP-MONITOR | ||
| 339-2038 Y | [1] | MOUNTING GP-SENSOR (LINKAGE) | ||
| 339-2044 Y | [1] | SENSOR & MOUNTING GP (ANGLE) | ||
| 204-3461 Y | [1] | WIRING GP-GRADE CONTROL (SENSOR) | ||
| 339-2041 Y | [1] | WIRING GP-GRADE CONTROL (DISPLAY) | ||
| 339-2039 | [1] | MONITOR GP (LIGHT BAR) | ||
| 244-1720 | [3] | MONITOR AS (LIGHT BAR) | ||
| 339-2037 | [1] | MOUNTING GP-SENSOR (CHASSIS) | ||
| [1] | BRACKET AS | |||
| 349-6070 | [1] | CABLE AS (SENSOR) | ||
| 339-2040 | [1] | SENSOR & MOUNTING GP (ROLL) | ||
| 8T-2396 M | [2] | BOLT (M6X1X60-MM) | ||
| 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | ||
| 276-6146 | [1] | SENSOR AS-ANGLE (AS400TC) | ||
| 339-2042 | [1] | SENSOR & MOUNTING GP (LINKAGE) | ||
| 265-9492 | [1] | JUNCTION BOX (GPS) | ||
| 312-0754 | [3] | SENSOR AS-ANGLE (AS450C) | ||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP48740512
339-2030: GRADE CONTROL GP-LASER
For full view, you need register
Parts for your 320D EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 8T-4137 M | [4] | BOLT (M10X1.5X20-MM) | ||
| 8T-4196 M | [4] | BOLT (M10X1.5X35-MM) | ||
| 322-0221 | [1] | BRACKET-HOUSING | ||
| 338-2744 | [1] | CABLE AS (SENSOR) | ||
| 5C-7261 M | [4] | NUT (M8X1.25-THD) | ||
| 273-6803 | [1] | PLATE | ||
| 312-0756 | [1] | RECEIVER AS-LASER (WITH ANGLE SENSOR) | ||
| 091-9035 | [4] | SPACER (11X25X20-MM THK) | ||
| 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | ||
| 8T-7934 | [4] | WASHER-HARD (11X21X5-MM THK) | ||
| M | METRIC PART | |||
#SEBP48740513
275-6841: HARNESS AS-CONTROL
275-6841 HARNESS AS-CONTROL
S/N KGF1-UP; FAL1-UP
PART OF 299-2954 WIRING GP-CHASSIS
AN ATTACHMENT
S/N KGF1-UP; FAL1-UP
PART OF 299-2954 WIRING GP-CHASSIS
AN ATTACHMENT
For full view, you need register
Parts for your 320D EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 239-7356 | [1] | PLUG AS-CONNECTOR (12-PIN) | ||
| 264-7034 | [1] | SEAL-CONNECTOR | ||
| 230-4009 | [1] | PLUG AS-CONNECTOR (12-PIN) | ||
| 264-7034 | [1] | SEAL-CONNECTOR | ||
| 243-4510 | [1] | RECEPTACLE AS-CONNECTOR (12-PIN) | ||
| 9X-3401 | [8] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [16] | PLUG-SEAL | ||
| 9X-3402 | [12] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(20-CM) | |||
| E | ORDER BY THE CENTIMETER | |||
#SEBP48740514
275-6842: HARNESS AS-CONTROL
275-6842 HARNESS AS-CONTROL
S/N KGF1-UP; FAL1-UP
PART OF 299-2954 WIRING GP-CHASSIS
AN ATTACHMENT
S/N KGF1-UP; FAL1-UP
PART OF 299-2954 WIRING GP-CHASSIS
AN ATTACHMENT
For full view, you need register
Parts for your 320D EXCAVATOR:
CATERPILLAR SIS#SEBP48740515
373-8965: HARNESS AS-CONTROL
373-8965 HARNESS AS-CONTROL -PRODUCT LINK
S/N KGF1-UP; FAL1-UP
PART OF 366-9348 WIRING GP-COMMUNICATION
AN ATTACHMENT
S/N KGF1-UP; FAL1-UP
PART OF 366-9348 WIRING GP-COMMUNICATION
AN ATTACHMENT
For full view, you need register
Parts for your 320D EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 126-1774 | [1] | COVER-CONNECTOR | ||
| 8T-8729 | [1] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9W-0852 | [1] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3401 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 160-7690 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 159-9322 | [1] | SEAL-O-RING | ||
| 8T-8737 | [64] | PLUG-SEAL | ||
| 243-4508 | [1] | RECEPTACLE AS-CONNECTOR (6-PIN) | ||
| 9X-3402 | [6] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 3S-2093 | [1] | STRAP-CABLE | ||
| 2L-8077 | [1] | TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM) | |||
| E | ORDER BY THE CENTIMETER | |||
#SEBP48740516
440-4822: HARNESS AS-CONTROL
440-4822 HARNESS AS-CONTROL
S/N KGF1-UP; FAL1-UP
PRODUCT LINK 321SR
PART OF 267-8007 WIRING GP-COMMUNICATION
AN ATTACHMENT
S/N KGF1-UP; FAL1-UP
PRODUCT LINK 321SR
PART OF 267-8007 WIRING GP-COMMUNICATION
AN ATTACHMENT
For full view, you need register
Parts for your 320D EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 126-1774 | [1] | COVER-CONNECTOR | ||
| 8T-8729 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9W-0852 | [1] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3401 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 160-7690 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 159-9322 | [1] | SEAL-O-RING | ||
| 8T-8737 | [62] | PLUG-SEAL | ||
| 243-4508 | [1] | RECEPTACLE AS-CONNECTOR (6-PIN) | ||
| 9X-3402 | [20] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [20] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 3S-2093 | [3] | STRAP-CABLE | ||
| 2L-8077 | [1] | TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM) | |||
| E | ORDER BY THE CENTIMETER | |||
#SEBP48740517
495-9718: HARNESS AS-PANEL
495-9718 HARNESS AS-PANEL
S/N KGF1-UP; FAL1-UP
PART OF 251-0542, 251-0544 PANEL GP-SWITCH
AN ATTACHMENT
S/N KGF1-UP; FAL1-UP
PART OF 251-0542, 251-0544 PANEL GP-SWITCH
AN ATTACHMENT
For full view, you need register
Parts for your 320D EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 3S-2093 | [4] | STRAP-CABLE | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 7Y-3951 | [2] | TERMINAL-BLADE (14-GA) | ||
| 7Y-3952 | [1] | PLUG-CONNECTOR (2-PIN) | ||
| 8T-8737 | [3] | PLUG-SEAL | ||
| 121-1168 | [1] | CONNECTOR-RECEPTACLE | ||
| 121-1173 | [14] | TERMINAL (MALE) | ||
| 9X-3402 | [7] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [7] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 2L-8075 | [4] | TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 230-5010 | [1] | PLUG AS-CONNECTOR (6-PIN) | ||
| 455-0707 | [1] | SEAL-CONNECTOR | ||
| 238-2366 | [7] | TERMINAL (MALE) | ||
#SEBP48740518
416-1814: HARNESS AS-PUMP
For full view, you need register
Parts for your 320D EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-8730 | [2] | SOCKET-CONNECTOR (16-GA TO 18-GA) | |
| 2. | 3S-2093 | [9] | STRAP-CABLE | |
| 3. | 7Y-3962 | [2] | TERMINAL-BULLET (MALE) | |
| 4. | 2L-8079 | [1] | TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW) | |
| 5. | 149-5051 | [1] | CONNECTOR-RECEPTACLE | |
| 6. | 149-5069 | [1] | TERMINAL-BLADE (14-GA TO 20-GA) | |
| 7. | 149-5070 | [2] | TERMINAL-BLADE (16-GA TO 20-GA) | |
| 8. | 149-5071 | [1] | TERMINAL-BLADE (12-GA TO 14-GA) | |
| 9. | 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | |
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL | ||||
#SEBP48740519
264-8665: INSTALLATION AR-COMMUNICATION
264-8665 INSTALLATION AR-COMMUNICATION -PRODUCT LINK 321SR
S/N KGF1-UP; FAL1-UP
AN ATTACHMENT
S/N KGF1-UP; FAL1-UP
AN ATTACHMENT
For full view, you need register
Parts for your 320D EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 247-5284 Y | [1] | CONTROL & MTG GP-COMMUNICATION (PRODUCT LINK 300) | ||
| 262-2043 Y | [1] | ELECTRONICS GP-COMMUNICATION (PRODUCT LINK 300) | ||
| 270-5511 Y | [1] | INSTALLATION GP-COMMUNICATION (PRODUCT LINK 121SR) | ||
| 290-9466 Y | [1] | MOUNTING GP-ANTENNA (PRODUCT LINK) | ||
| 267-8007 Y | [1] | WIRING GP-COMMUNICATION (PRODUCT LINK 321SR) | ||
| Y | SEPARATE ILLUSTRATION | |||
Information:
ELECTRICAL AND STARTING SYSTEM
CONTROL GP-GRADE
Special Instruction
Installation Of The AccuGrade<SUP>®</SUP> GPS Components{7220}
Installation Of The AccuGrade® GPS Components{7220}
Installation Of The AccuGrade® GPS Components{7220}
Installation of the AccuGrade<SUP>®</SUP> Grade Control System (Dual - Single GPS/ UTS/ Depth and Slope) for Excavators{7220}
Installation of the AccuGrade® Grade Control System (Dual - Single GPS/ UTS/ Depth and Slope) for Excavators{7220}
Installation of the AccuGrade® Grade Control System (Dual - Single GPS/ UTS/ Depth and Slope) for Excavators{7220}
Technical Information Bulletin
Incorrect Values for Pitch on Excavators with AccuGrade Version 11{7220, 7620}
Incorrect Values for Pitch on Excavators with AccuGrade Version 11{7220, 7620}
Incorrect Values for Pitch on Excavators with AccuGrade Version 11{7220, 7620}
Systems Operation
Brightness (Display and Light Bar)
AccuGrade® GPS / Single UTS / Site and Laser Reference v11 for Excavators
AccuGrade® GPS / Single UTS / Site and Laser Reference v11 for Excavators
Display Registration and Activation
AccuGrade® GPS / Single UTS / Site and Laser Reference v11 for Excavators
AccuGrade® GPS / Single UTS / Site and Laser Reference v11 for Excavators
Testing and Adjusting
Angle Sensor - Calibrate - AS300/AS450 System
AccuGrade® GPS / Single UTS / Site and Laser Reference v11 for Excavators
AccuGrade® GPS / Single UTS / Site and Laser Reference v11 for Excavators
Machine Dimensions - Configure
AccuGrade® GPS / Single UTS / Site and Laser Reference v11 for Excavators
AccuGrade® GPS / Single UTS / Site and Laser Reference v11 for Excavators
Excavator Arm Sensors - Calibrate - PSC System
AccuGrade® GPS / Single UTS / Site and Laser Reference v11 for Excavators
AccuGrade® GPS / Single UTS / Site and Laser Reference v11 for Excavators
Troubleshooting
Electrical Power Supply (Display)
AccuGrade® GPS / Single UTS / Site and Laser Reference v11 for Excavators
AccuGrade® GPS / Single UTS / Site and Laser Reference v11 for Excavators
Electrical Power Supply (Light Bar)
AccuGrade® GPS / Single UTS / Site and Laser Reference v11 for Excavators
AccuGrade® GPS / Single UTS / Site and Laser Reference v11 for Excavators
Electrical Power Supply (GPS Receiver)
AccuGrade® GPS / Single UTS / Site and Laser Reference v11 for Excavators
AccuGrade® GPS / Single UTS / Site and Laser Reference v11 for Excavators
Electrical Power Supply (Data Radio)
AccuGrade® GPS / Single UTS / Site and Laser Reference v11 for Excavators
AccuGrade® GPS / Single UTS / Site and Laser Reference v11 for Excavators
Electrical Power Supply (Angle Sensor)
AccuGrade® GPS / Single UTS / Site and Laser Reference v11 for Excavators
AccuGrade® GPS / Single UTS / Site and Laser Reference v11 for Excavators
Universal Total Station - MT900
AccuGrade® GPS / Single UTS / Site and Laser Reference v11 for Excavators
AccuGrade® GPS / Single UTS / Site and Laser Reference v11 for Excavators
