AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

324-5774 WIRING GP-CAMERA -REAR VISION CAMERA S/N KGF1-UP; FAL1-UP PART OF 314-3774 CAMERA AR AN ATTACHMENT 320D


ELECTRICAL AND STARTING SYSTEM
WIRING GP

EXCAVATOR 320D EXCAVATOR FAL
 320D & 320D L Excavators FAL00001-UP (MACHINE) POWERED BY C6.4 Engine SEBP4874 320D FAL   (2006)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
WIRING GP-CAB
306-8349 WIRING GP-CAB
WIRING GP-CAB
328-0048 WIRING GP-CAB
WIRING GP-CAMERA
324-5774 WIRING GP-CAMERA
WIRING GP-CHASSIS
299-2954 WIRING GP-CHASSIS
WIRING GP-CHASSIS
299-2954 WIRING GP-CHASSIS
WIRING GP-CHASSIS
319-1387 WIRING GP-CHASSIS
 

#SEBP48740610
 

324-5774: WIRING GP-CAMERA

324-5774 WIRING GP-CAMERA -REAR VISION CAMERA
S/N KGF1-UP; FAL1-UP
PART OF 314-3774 CAMERA AR
AN ATTACHMENT
i03114065 SEBP4874
3245774 WIRING GP-CAMERA Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [20] STRAP-CABLE  
2. 7K-1181 [5] STRAP-CABLE  
3. 268-8643 [1] CABLE AS (6-M)  
 

#SEBP48740611
 

299-2954: WIRING GP-CHASSIS

299-2954 WIRING GP-CHASSIS -ACCUGRADE READY
S/N KGF1-UP; FAL1-UP
PART OF 290-1774, 290-1775 CONVERSION AR-MACHINE, 314-3883 GRADE CONTROL AR, 314-3882 INSTALLATION AR
Type 1
AN ATTACHMENT
i02845589 SEBP4874
2992954 WIRING GP-CHASSIS Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 [46] STRAP-CABLE  
2. 111-4836 [1] CLIP  
3. 177-7707 [2] BOSS  
4. 275-6841 Y [1] HARNESS AS-CONTROL (BODY TILT SENSOR, GPS RECEIVER)  
5. 275-6842 Y [1] HARNESS AS-CONTROL (DISPLAY, GPS RADIO)  
6. 279-7609 [1] BRACKET AS  
7. 299-2963 [1] HARNESS AS-CONTROL (BLADE)  
8. 132-5789 [2] CLIP (LADDER)  
9. 2S-1647 [1] GROMMET  
10. 4P-7428 [1] CLIP (LADDER)  
11. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
12. 8T-4191 M [2] BOLT (M10X1.5X16-MM)  
13. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
14. 8T-4648 M [2] BOLT (M12X1.75X70-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP48740612
 

299-2954: WIRING GP-CHASSIS

299-2954 WIRING GP-CHASSIS -ACCUGRADE READY
S/N KGF1-UP; FAL1-UP
PART OF 290-1774, 290-1775 CONVERSION AR-MACHINE, 314-3883 GRADE CONTROL AR, 314-3882 INSTALLATION AR
Type 2
AN ATTACHMENT
i04759208 SEBP4874
2992954 WIRING GP-CHASSIS Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 [46] STRAP-CABLE  
2. 111-4836 [1] CLIP  
3. 177-7707 [2] BOSS  
4. 275-6841 Y [1] HARNESS AS-CONTROL (BODY TILT SENSOR, GPS RECEIVER)  
5. 275-6842 Y [1] HARNESS AS-CONTROL (DISPLAY, GPS RADIO)  
6. 279-7609 [1] BRACKET AS  
7. 364-0229 C [1] HARNESS AS-CONTROL (BLADE)  
  3R-9965 [1] PLUG AS-CONNECTOR (8-PIN)  
  3S-2093 [1] STRAP-CABLE  
  6D-5257 [1] PLUG AS-CONNECTOR (8-PIN)  
  8L-8413 [3] STRAP-CABLE (WHITE)  
  8T-8737 [18] PLUG-SEAL  
  104-6871 [2] CAP-DUST  
  9W-0844 [3] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(40-CM)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(50-CM)  
  9X-3402 [32] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  2L-8069 [1] TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW)  
  134-2540 [2] RECEPTACLE AS-CONNECTOR  
  9X-3401 [21] PIN-CONNECTOR (16-GA TO 18-GA)  
  174-0503 [2] KIT-CONNECTING PLUG (3-PIN)  
    (INCLUDES PLUG AS & WEDGE & INTERFACE SEAL)
  155-2260 [2] KIT-CONNECTING PLUG (3-PIN)  
    (INCLUDES PLUG AS & WEDGE & INTERFACE SEAL)
  230-4009 [3] PLUG AS-CONNECTOR (12-PIN)  
    (EACH INCLUDES)
  264-7034 [1] SEAL-CONNECTOR  
  231-2295 [1] PLUG AS-CONNECTOR (8-PIN)  
  264-7033 [1] SEAL-CONNECTOR  
  243-4510 [1] RECEPTACLE AS-CONNECTOR (12-PIN)  
  243-5362 [1] CAP-DUST  
  253-2695 [1] PLUG AS-CONNECTOR  
  272-5000 [1] RECEPTACLE AS-CONNECTOR (12-PIN)  
8. 132-5789 [2] CLIP (LADDER)  
9. 2S-1647 [1] GROMMET  
10. 4P-7428 [1] CLIP (LADDER)  
11. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
12. 8T-4191 M [2] BOLT (M10X1.5X16-MM)  
13. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
14. 8T-4648 M [2] BOLT (M12X1.75X70-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP48740613
 

319-1387: WIRING GP-CHASSIS

319-1387 WIRING GP-CHASSIS
S/N KGF1258-3940; FAL842-2991
PART OF 264-8638, 264-8639 CHASSIS AR
i02945005 SEBP4874
3191387 WIRING GP-CHASSIS Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [2] STRAP-CABLE  
2. 7K-1181 [5] STRAP-CABLE  
3. 319-1348 [1] HARNESS AS-CONTROL (ENGINE START, PUMP CONTROL)  
 

#SEBP48740614
 

259-5045: WIRING GP-COMBINED FLOW

259-5045 WIRING GP-COMBINED FLOW
S/N KGF1-UP; FAL1-UP
PART OF 259-7493, 259-7495 CONTROL AR-AUXILIARY
AN ATTACHMENT
i02423358 SEBP4874
2595045 WIRING GP-COMBINED FLOW Parts scheme 2595045 WIRING GP-COMBINED FLOW Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [23] STRAP-CABLE  
2. 7K-1181 [11] STRAP-CABLE  
3. 111-4836 [2] CLIP  
4. 116-0118 [1] CLIP  
5. 204-1611 [4] STRAP (DUAL)  
6. 267-7636 [1] HARNESS AS-AUXILIARY  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  9W-0852 [1] PIN-CONNECTOR (14-GA TO 16-GA)  
  9X-3401 [1] PIN-CONNECTOR (16-GA TO 18-GA)  
  155-2270 [6] KIT-CONNECTING PLUG (2-PIN)  
    (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  230-5010 [1] PLUG AS-CONNECTOR (6-PIN)  
  264-7032 [1] SEAL-CONNECTOR  
  8T-8737 [9] PLUG-SEAL  
  243-4510 [1] RECEPTACLE AS-CONNECTOR (12-PIN)  
  8T-8730 [14] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  9W-0844 [1] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  9X-3402 [2] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  3S-2093 [1] STRAP-CABLE  
  2L-8079 [3] TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(20-CM)  
7. 132-5789 [1] CLIP (LADDER)  
8. 156-6175 [1] CLIP (LADDER)  
9. 4P-7581 [1] CLIP (LADDER)  
10. 8T-4121 [3] WASHER-HARD (11X21X2.5-MM THK)  
11. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
12. 8T-4171 M [1] BOLT (M6X1X12-MM)  
13. 8T-4191 M [2] BOLT (M10X1.5X16-MM)  
14. 8T-4195 M [1] BOLT (M10X1.5X30-MM)  
15. 9X-8256 [1] WASHER (6.6X12X2-MM THK)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP48740615
 

267-8007: WIRING GP-COMMUNICATION

267-8007 WIRING GP-COMMUNICATION -PRODUCT LINK 321SR
S/N KGF1-UP; FAL1-UP
PART OF 264-8665 INSTALLATION AR-COMMUNICATION
Type 1
AN ATTACHMENT
i02555427 SEBP4874
2678007 WIRING GP-COMMUNICATION Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [2] STRAP-CABLE  
2. 4I-7889 [1] SPACER (11X25X45-MM THK)  
3. 7K-1181 [3] STRAP-CABLE  
4. 9X-3495 [1] CLIP AS  
5. 091-9035 [1] SPACER (11X25X20-MM THK)  
6. 116-0118 [3] CLIP  
7. 259-4887 [1] HARNESS AS-WIRING (PRODUCT LINK)  
  3S-2093 [2] STRAP-CABLE  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(15-CM)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)  
  126-1774 [1] COVER-CONNECTOR  
  160-7690 [1] PLUG AS-CONNECTOR (70-PIN)  
  230-5010 [2] PLUG AS-CONNECTOR (6-PIN)  
  243-4508 [2] RECEPTACLE AS-CONNECTOR (6-PIN)  
8. 259-4940 [1] HARNESS AS-WIRING (SERVICE CONNECTOR)  
  243-4508 [1] RECEPTACLE AS-CONNECTOR (6-PIN)  
9. 275-6979 [1] HARNESS AS-CONTROL (PRODUCT LINK 121SR)  
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  230-5010 [1] PLUG AS-CONNECTOR (6-PIN)  
  243-4508 [1] RECEPTACLE AS-CONNECTOR (6-PIN)  
10. 111-4837 [1] CLIP  
11. 132-5789 [2] CLIP (LADDER)  
12. 8T-4121 [3] WASHER-HARD (11X21X2.5-MM THK)  
13. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
14. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
15. 8T-4185 M [1] BOLT (M10X1.5X50-MM)  
16. 8T-4191 M [1] BOLT (M10X1.5X16-MM)  
17. 8T-5005 M [1] BOLT (M10X1.5X70-MM)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP48740616
 

267-8007: WIRING GP-COMMUNICATION

267-8007 WIRING GP-COMMUNICATION -PRODUCT LINK 321SR
S/N KGF1-UP; FAL1-UP
PART OF 264-8665, 298-4115 INSTALLATION AR-COMMUNICATION
Type 2
AN ATTACHMENT
i02858397 SEBP4874
2678007 WIRING GP-COMMUNICATION Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [2] STRAP-CABLE  
2. 4I-7889 [1] SPACER (11X25X45-MM THK)  
3. 7K-1181 [3] STRAP-CABLE  
4. 9X-3495 [1] CLIP AS  
6. 116-0118 [3] CLIP  
7. 259-4887 [1] HARNESS AS-WIRING (PRODUCT LINK)  
  3S-2093 [2] STRAP-CABLE  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(15-CM)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)  
  126-1774 [1] COVER-CONNECTOR  
  160-7690 [1] PLUG AS-CONNECTOR (70-PIN)  
  230-5010 [2] PLUG AS-CONNECTOR (6-PIN)  
  243-4508 [2] RECEPTACLE AS-CONNECTOR (6-PIN)  
8. 259-4940 [1] HARNESS AS-WIRING (SERVICE CONNECTOR)  
  243-4508 [1] RECEPTACLE AS-CONNECTOR (6-PIN)  
9. 275-6979 [1] HARNESS AS-CONTROL (PRODUCT LINK 121SR)  
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  230-5010 [1] PLUG AS-CONNECTOR (6-PIN)  
  243-4508 [1] RECEPTACLE AS-CONNECTOR (6-PIN)  
10. 111-4837 [1] CLIP  
11. 132-5789 [2] CLIP (LADDER)  
12. 8T-4121 [3] WASHER-HARD (11X21X2.5-MM THK)  
13. 8T-4136 CM [2] BOLT (M10X1.5X25-MM)  
14. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
16. 8T-4191 M [1] BOLT (M10X1.5X16-MM)  
17. 8T-5005 M [1] BOLT (M10X1.5X70-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP48740617
 

267-8007: WIRING GP-COMMUNICATION

267-8007 WIRING GP-COMMUNICATION -PRODUCT LINK 321SR
S/N KGF1-UP; FAL1-UP
PART OF 298-4115 INSTALLATION AR-COMMUNICATION
Type 3
AN ATTACHMENT
i05875960 SEBP4874
2678007 WIRING GP-COMMUNICATION Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4I-7889 [1] SPACER (11X25X45-MM THK)  
2. 111-4837 [1] CLIP  
3. 116-0118 C [1] CLIP  
4. 440-4822 CY [1] HARNESS AS-CONTROL  
5. 132-5789 [2] CLIP (LADDER)  
6. 7K-1181 [3] STRAP-CABLE  
7. 8T-4121 [3] WASHER-HARD (11X21X2.5-MM THK)  
8. 8T-4136 CM [1] BOLT (M10X1.5X25-MM)  
9. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
10. 8T-4191 M [1] BOLT (M10X1.5X16-MM)  
11. 8T-5005 M [1] BOLT (M10X1.5X70-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP48740618
 

267-8008: WIRING GP-COMMUNICATION

267-8008 WIRING GP-COMMUNICATION -PRODUCT LINK 121SR
S/N KGF1-UP; FAL1-UP
PART OF 264-8666 INSTALLATION AR-COMMUNICATION
Type 1
AN ATTACHMENT
i02426299 SEBP4874
2678008 WIRING GP-COMMUNICATION Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [2] STRAP-CABLE  
2. 4I-7889 [1] SPACER (11X25X45-MM THK)  
3. 7K-1181 [3] STRAP-CABLE  
4. 9X-3495 [1] CLIP AS  
  8C-3334 [2] RIVET-TUBULAR  
5. 091-9035 [1] SPACER (11X25X20-MM THK)  
6. 116-0118 [2] CLIP  
7. 259-4940 [1] HARNESS AS-WIRING (SERVICE CONNECTOR)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  155-2260 [6] KIT-CONNECTING PLUG (3-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  243-4508 RECEPTACLE AS-CONNECTOR (6-PIN)  
8. 275-6979 [1] HARNESS AS-CONTROL (PRODUCT LINK 121SR)  
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  230-5010 [1] PLUG AS-CONNECTOR (6-PIN)  
  243-4508 [1] RECEPTACLE AS-CONNECTOR (6-PIN)  
9. 132-5789 [1] CLIP (LADDER)  
10. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
11. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
12. 8T-4185 M [1] BOLT (M10X1.5X50-MM)  
13. 8T-5005 M [1] BOLT (M10X1.5X70-MM)  
  M   METRIC PART
 

#SEBP48740619
 

267-8008: WIRING GP-COMMUNICATION

267-8008 WIRING GP-COMMUNICATION -PRODUCT LINK 121SR
S/N KGF1-UP; FAL1-UP
PART OF 264-8666, 298-4116 INSTALLATION AR-COMMUNICATION
Type 2
AN ATTACHMENT
i02858404 SEBP4874
2678008 WIRING GP-COMMUNICATION Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [2] STRAP-CABLE  
2. 4I-7889 [1] SPACER (11X25X45-MM THK)  
3. 7K-1181 [3] STRAP-CABLE  
4. 9X-3495 [1] CLIP AS  
6. 116-0118 [2] CLIP  
7. 259-4940 [1] HARNESS AS-WIRING (SERVICE CONNECTOR)  
8. 275-6979 [1] HARNESS AS-CONTROL (PRODUCT LINK 121SR)  
9. 132-5789 [1] CLIP (LADDER)  
10. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
11. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
12. 8T-4136 CM [1] BOLT (M10X1.5X25-MM)  
13. 8T-5005 M [1] BOLT (M10X1.5X70-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

Information:

Engine News
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13
Operation and Maintenance Manual
Battery Disconnect Switch
320D Excavator
Battery or Battery Cable - Inspect/Replace
320D Excavator
Battery - Recycle
320D Excavator
Power Receptacle - If Equipped
320D Excavator
Fuses - Replace
320D Excavator
Special Instruction
Installation of 183-9371 Coupler Lines Gp (KIT, WEDGE LOCK){1408, 5000, 5051, 5057, 6129, 7000, 7332}
Installation of 183-9371 Coupler Lines Gp (KIT, WEDGE LOCK){1408, 5000, 5051, 5057, 6129, 7000, 7332}
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Installation of 279-5323 Coupler Lines Gp (KIT, PIN GRABBER){1408, 5057, 5479, 6129, 7000, 7332}
Installation of 279-5323 Coupler Lines Gp (KIT, PIN GRABBER){1408, 5057, 5479, 6129, 7000, 7332}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Master Guide for Field Installation of 315-6132, 315-6131 Auxiliary Control Arrangement on Certain Excavators{1408, 5051, 5057, 5059, 5063, 7301}
Master Guide for Field Installation of 315-6132, 315-6131 Auxiliary Control Arrangement on Certain Excavators{1408, 5051, 5057, 5059, 5063, 7301}
Installation Procedure for 251-0529 Cab Wiring Gp on Certain Hydraulic Excavators {1408}
Installation Procedure for 251-0529 Cab Wiring Gp on Certain Hydraulic Excavators {1408}
Installation Procedure for 259-5045 Combined Flow Wiring Gp {1408}
Installation Procedure for 259-5045 Combined Flow Wiring Gp {1408}
Troubleshooting Guide for 161-3128 Relay on Certain Excavators{1408, 7301}
Troubleshooting Guide for 161-3128 Relay on Certain Excavators{1408, 7301}
Installation Procedure for 275-7203 Auxiliary Control Wiring Gp {1408}
Installation Procedure for 275-7203 Auxiliary Control Wiring Gp {1408}
Installation of the 270-6106 Auxiliary Control Ar {1408, 1435, 7405, 7553, 7557}
Installation of the 270-6106 Auxiliary Control Ar {1408, 1435, 7405, 7553, 7557}
Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}
Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}
Procedure for Installing the 373-8980 Console Harness As on Certain Excavators{1408, 5258}
Procedure for Installing the 373-8980 Console Harness As on Certain Excavators{1408, 5258}
DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}
Installation of the 238-1565 Quick Coupler Wiring Gp on Certain Hydraulic Excavators{1408, 6129}
Installation of the 238-1565 Quick Coupler Wiring Gp on Certain Hydraulic Excavators{1408, 6129}
Procedure to Troubleshoot the Upper Window Wiper Relay on Certain 311D through 349D, E Series, and F Series Excavators{1408, 7305}
Procedure to Troubleshoot the Upper Window Wiper Relay on Certain 311D through 349D, E Series, and F Series Excavators{1408, 7305}
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE WIRING HARNESS FOR THE ENGINE AIR HEATER RELAY ON CERTAIN 320D, 320D L, AND 323D LN EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE WIRING HARNESS FOR THE ENGINE AIR HEATER RELAY ON CERTAIN 320D, 320D L, AND 323D LN EXCAVATORS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
The Machine Service Meter Display on Certain Excavators Is Higher than the Machine Running Hours Compared with the Monitor{1408, 7301}
The Machine Service Meter Display on Certain Excavators Is Higher than the Machine Running Hours Compared with the Monitor{1408, 7301}
Wrong Resistor May be Installed into <NOBR>176-9668</NOBR> Instrument Console Gp on Certain Excavators and Wheel Loaders {1408, 1437, 6129}
Wrong Resistor May be Installed into 176-9668 Instrument Console Gp on Certain Excavators and Wheel Loaders {1408, 1437, 6129}
Specifications
Wiring (Battery)
320D and 323D Excavators Machine System Specifications
Wiring (Battery) - Cold Weather
320D and 323D Excavators Machine System Specifications
Wiring (Refueling Pump)
320D and 323D Excavators Machine System Specifications
Wiring (Battery)
320D and 323D Excavators Machine System Specifications
Tool Operating Manual
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Service Letter-China
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE WIRING HARNESS FOR THE ENGINE AIR HEATER RELAY ON CERTAIN 320D, 320D L, AND 323D LN EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE WIRING HARNESS FOR THE ENGINE AIR HEATER RELAY ON CERTAIN 320D, 320D L, AND 323D LN EXCAVATORS
Service Letter-Asia
Systems Operation
Relays
320D, 320D2, 321D, 323D, 324D, 325D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators Tool Control System
Senders
320D, 320D2, 321D, 323D, 324D, 325D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators Tool Control System
Sensors
320D, 320D2, 321D, 323D, 324D, 325D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators Tool Control System
Switches
320D, 320D2, 321D, 323D, 324D, 325D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators Tool Control System
Switches
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
Sensors
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Caterpillar Machines
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Service Letter-APD
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE WIRING HARNESS FOR THE ENGINE AIR HEATER RELAY ON CERTAIN 320D, 320D L, AND 323D LN EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE WIRING HARNESS FOR THE ENGINE AIR HEATER RELAY ON CERTAIN 320D, 320D L, AND 323D LN EXCAVATORS
Testing and Adjusting
Electric Starting System - Test
C4.2 and C6.4 Engines for Caterpillar Built Machines
Electrical Connector - Inspect
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
Wiring Harness (Open Circuit) - Test
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
Wiring Harness (Short Circuit) - Test
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
System Schematic
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
Overload Warning - Set - If Equipped
320D and 323D Excavators Hydraulic System
Electrical Connector - Inspect
AccuGrade® GPS / Single UTS / Site and Laser Reference v11 for Excavators
Wiring Harness (Open Circuit) - Test
AccuGrade® GPS / Single UTS / Site and Laser Reference v11 for Excavators
Wiring Harness (Short Circuit) - Test
AccuGrade® GPS / Single UTS / Site and Laser Reference v11 for Excavators
Connector Contact Description
AccuGrade® GPS / Single UTS / Site and Laser Reference v11 for Excavators
Electrical Connector - Inspect
Product Link - PL522/523
Wiring Harness (Open Circuit) - Test
Product Link - PL522/523
Wiring Harness (Short Circuit) - Test
Product Link - PL522/523
Electrical Connector - Inspect
Product Link 121S/300
Wiring Harness (Open Circuit) - Test
Product Link 121S/300
Wiring Harness (Short Circuit) - Test
Product Link 121S/300
System Schematic
Machine Security System (MSS3i) Integrated
Troubleshooting
MID 039 - CID 0096 - FMI 05
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 0096 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 0586 - FMI 05
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 0586 - FMI 12
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 0588 - FMI 09
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 1178 - FMI 03
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 1178 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 1178 - FMI 08
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 2280 - FMI 03
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
Electrical Component and Connector Locations
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 0110 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 0110 - FMI 09
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 2300 - FMI 09
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 0600 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
Electrical Connectors
C4.2 and C6.4 Engines for Caterpillar Built Machines
Electrical Connectors - Inspect
C4.2 and C6.4 Engines for Caterpillar Built Machines
CAN Data Link - Test
AccuGrade® GPS / Single UTS / Site and Laser Reference v11 for Excavators
MID 122 - CID 0269 - FMI 03
Product Link 121S/300
MID 122 - CID 0269 - FMI 04
Product Link 121S/300
Service Magazine
Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04
Investigation of the Liquid Level Switch on the Engine Oil Pan and on the Hydraulic Tank for Excavators {1302, 1408, 5056, 5068, 7422}
2009/08/31
Troubleshooting the Rotary Switch Assembly for the Engine Speed {1408, 7332}
2008/08/18
Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17
New Software and a New Rotary Switch Improve the Reliability of the Engine Speed Dial on Excavators {1408, 7332, 7610, 7620}
2009/04/13
An Improved Backup Alarm is Now Available {7406}
2009/01/05
Inspection Procedure for Switch Panel on Certain Excavators {1408, 7301, 7305, 7306, 7310}
2009/03/09
A New Harness Assembly for the Right Hand Console is Now Available {1408}
2011/04/04
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2012/03/05
Improvement Made to the Harness in the Right-Hand Side Cab Console for Certain Excavators {1408}
2010/04/22
A Troubleshooting Procedure is Available for the Operation Check Relay on Certain Excavators {1408, 7301}
2010/07/28
Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08
A New Console Harness Assembly Is Available for Certain Excavators {1408}
2015/04/13
Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21
Parts are Now Available to Make Jump Start Receptacle on Cat<SUP>&reg;</SUP> Product {1463}
2014/03/04
The Control Panel Assembly has been Improved for Certain 311D to 349D Excavators {1408, 7301}
2014/03/27
A New Special Instruction is Available for Troubleshooting the Upper Window Wiper Relay Circuit on Certain 311D-349D, E Series, and F Series Excavators {1408, 7305}
2015/08/07
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}

Caterpillar Parts SIS Catalog 320D :

WIRING GP-CAB
328-0048 WIRING GP-CAB
WIRING GP-CAB
306-8349 WIRING GP-CAB
WIRING GP-CAB
299-2792 WIRING GP-CAB
WIRING GP-CAB
299-2792 WIRING GP-CAB
WIRING GP-CAB
267-7642 WIRING GP-CAB
WIRING GP-CAB
259-5161 WIRING GP-CAB
WIRING GP-CAB
259-5161 WIRING GP-CAB
WIRING GP-CAB
251-0529 WIRING GP-CAB
WIRING GP-CHASSIS
299-2954 WIRING GP-CHASSIS
WIRING GP-CHASSIS
299-2954 WIRING GP-CHASSIS
WIRING GP-CHASSIS
319-1387 WIRING GP-CHASSIS
WIRING GP-COMBINED FLOW
259-5045 WIRING GP-COMBINED FLOW
WIRING GP-COMMUNICATION
267-8007 WIRING GP-COMMUNICATION
WIRING GP-COMMUNICATION
267-8007 WIRING GP-COMMUNICATION
WIRING GP-COMMUNICATION
267-8007 WIRING GP-COMMUNICATION
WIRING GP-COMMUNICATION
267-8008 WIRING GP-COMMUNICATION

Truck sale:

Caterpillar 320D2
 
Caterpillar 320D2
- Crawler Excavators
THE CHINA ENGINEERS, LTD
Caterpillar 320D2
 
Caterpillar 320D2
- Crawler Excavators
PESA
Caterpillar 320D2, Construction
On Request 
Caterpillar 320D2, Construction
- Crawler Excavators
MONARK EQUIPMENT
Philippines
Caterpillar 320D2, Construction
139,000 USD 
Caterpillar 320D2, Construction
- Crawler Excavators
EMPRESAS MATCO, S.A. DE C.V.
Mexico
CATERPILLAR 320D2 2014
 
CATERPILLAR 320D2 2014
- TRACK EXCAVATORS
PESA
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.