AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

294-1480 BOOM GP S/N KGF1-UP; FAL1-UP 5.7-M (18.7-FT) PART OF 416-0961 BOOM AR-1 PIECE LONG AN ATTACHMENT 320D


IMPLEMENTS
BOOM GP
LINKAGE GP
LINES GP-GREASE

EXCAVATOR 320D EXCAVATOR FAL
 320D & 320D L Excavators FAL00001-UP (MACHINE) POWERED BY C6.4 Engine SEBP4874 320D FAL   (2006)

IMPLEMENTS

BOOM GP
BOOM GP
290-9195 BOOM GP
BOOM GP
290-9198 BOOM GP
BOOM GP
294-1480 BOOM GP
BOOM GP
315-1049 BOOM GP
BOOM GP
418-5104 BOOM GP
BOOM GP
418-5104 BOOM GP
 

#SEBP48741460
 

294-1480: BOOM GP

294-1480 BOOM GP
S/N KGF1-UP; FAL1-UP
5.7-M (18.7-FT)
PART OF 416-0961 BOOM AR-1 PIECE LONG
AN ATTACHMENT
i02951810 SEBP4874
2941480 BOOM GP Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4I-3308 [2] PLATE  
2. 4I-3309 [2] SPACER (82X110X3-MM THK)  
3. 093-0084 B [2] SHIM (1-MM THK)  
4. 093-0116 [2] SHIM (2-MM THK)  
5. 093-0349 [2] WASHER (22X60X6-MM THK)  
6. 093-0363 [1] SPACER (83X120X12-MM THK)  
7. 113-2127 B [1] SHIM (0.5-MM THK)  
8. 166-1486 [2] SHIM (2-MM THK)  
9. 166-1495 [2] SEAL-LIP TYPE  
10. 176-2278 [1] PIN  
11. 264-1702 [1] PIN AS  
12. 294-1481 [1] BOOM & BEARING AS  
12A. 244-4277 [2] BUSHING  
13. 166-1487 [2] SHIM (2-MM THK)  
14. 4I-4809 [1] PIN AS  
15. 451-2176 [2] WASHER-HARD (22X35X3.5-MM THK)  
16. 8T-4223 [6] WASHER-HARD (13.5X25.5X3-MM THK)  
17. 453-2844 M [2] BOLT (M20X2.5X30-MM)  
18. 8T-4956 M [6] BOLT (M12X1.75X35-MM)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP48741461
 

315-1049: BOOM GP

315-1049 BOOM GP
S/N KGF1-UP; FAL1-UP
5.7-M (18.7-FT)
PART OF 298-4308, 415-8448 BOOM AR-1 PIECE LONG
AN ATTACHMENT
i02954802 SEBP4874
3151049 BOOM GP Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4I-3308 [2] PLATE  
2. 4I-3309 [2] SPACER (82X110X3-MM THK)  
3. 093-0084 B [2] SHIM (1-MM THK)  
4. 093-0116 J [2] SHIM (2-MM THK)  
5. 093-0349 [2] WASHER (22X60X6-MM THK)  
6. 093-0363 [1] SPACER (83X120X12-MM THK)  
7. 113-2127 B [1] SHIM (0.5-MM THK)  
8. 166-1486 [2] SHIM (2-MM THK)  
9. 166-1495 [2] SEAL-LIP TYPE  
10. 176-2278 [1] PIN  
11. 264-1702 [1] PIN AS  
12. 315-1050 [1] BOOM & BEARING AS  
12A. 228-5615 [2] BUSHING  
13. 166-1487 [2] SHIM (2-MM THK)  
14. 4I-4809 [1] PIN AS  
15. 451-2176 [2] WASHER-HARD (22X35X3.5-MM THK)  
16. 8T-4223 [6] WASHER-HARD (13.5X25.5X3-MM THK)  
17. 453-2844 M [2] BOLT (M20X2.5X30-MM)  
18. 8T-4956 M [6] BOLT (M12X1.75X35-MM)  
  B   USE AS REQUIRED
  J   USE ONLY ON OPTIONAL DESIGN
  M   METRIC PART
 

#SEBP48741462
 

418-5104: BOOM GP

418-5104 BOOM GP
S/N KGF1-UP
8.85-M (29-FT)
PART OF 419-0528 LINKAGE AR-FRONT
Type 1
AN ATTACHMENT
i05219412 SEBP4874
4185104 BOOM GP Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4I-3308 [2] PLATE  
2. 4I-3309 [2] SPACER (82X110X3-MM THK)  
3. 4I-4618 [1] PIN AS  
4. 093-0084 B [2] SHIM (1-MM THK)  
5. 093-0349 [2] WASHER (22X60X6-MM THK)  
6. 093-0363 [1] SPACER (83X120X12-MM THK)  
7. 113-2127 B [1] SHIM (0.5-MM THK)  
8. 166-1486 [2] SHIM (2-MM THK)  
9. 176-2278 [1] PIN  
10. 250-2402 [1] PIN AS  
11. 418-5105 [1] BOOM & BEARING AS  
11A. 244-4277 [2] BUSHING  
12. 166-1487 [2] SHIM (2-MM THK)  
13. 166-1495 [2] SEAL-LIP TYPE  
14. 451-2176 [2] WASHER-HARD (22X35X3.5-MM THK)  
15. 8T-4223 [6] WASHER-HARD (13.5X25.5X3-MM THK)  
16. 453-2844 M [2] BOLT (M20X2.5X30-MM)  
17. 8T-4956 M [6] BOLT (M12X1.75X35-MM)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP48741463
 

418-5104: BOOM GP

418-5104 BOOM GP
S/N KGF1-UP
8.85-M (29-FT)
PART OF 419-0528 LINKAGE AR-FRONT
Type 2
AN ATTACHMENT
i06924966 SEBP4874
4185104 BOOM GP Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4I-3308 [2] PLATE  
2. 4I-3309 [2] SPACER (82X110X3-MM THK)  
3. 4I-4618 [1] PIN AS  
4. 093-0084 B [2] SHIM (1-MM THK)  
5. 093-0349 [2] WASHER (22X60X6-MM THK)  
6. 093-0363 [1] SPACER (83X120X12-MM THK)  
7. 113-2127 B [1] SHIM (0.5-MM THK)  
8. 166-1486 [2] SHIM (2-MM THK)  
9. 176-2278 [1] PIN  
10. 250-2402 [1] PIN AS  
11. 483-5068 C [1] BOOM & BEARING AS  
11A. 228-5615 [2] BUSHING  
12. 166-1487 [2] SHIM (2-MM THK)  
13. 166-1495 [2] SEAL-LIP TYPE  
14. 451-2176 [2] WASHER-HARD (22X35X3.5-MM THK)  
15. 451-2182 C [6] WASHER-HARD (13.5X25.5X3-MM THK)  
16. 453-2844 M [2] BOLT (M20X2.5X30-MM)  
17. 453-3446 CM [6] BOLT (M12X1.75X35-MM)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP48741464
 

244-8503: CONVERSION GP-LINKAGE

244-8503 CONVERSION GP-LINKAGE
S/N KGF1-UP
B1-FAMILY, B-FAMILY, FOR EUROPE
PART OF 314-3859, 314-3860, 314-3861, 314-3862, 314-3865, 314-3905, 354-1019, 359-2310, 379-7118 DISTRIBUTION AR
AN ATTACHMENT
i02397738 SEBP4874
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  453-2834 M [2] BOLT (M16X2X30-MM)  
  244-8504 [2] PIN AS  
  7Y-3110 [2] WASHER-SPECIAL (17X65X6-MM THK)  
  M   METRIC PART
 

#SEBP48741465
 

127-6625: LINES GP-GREASE

127-6625 LINES GP-GREASE -STICK
S/N KGF1-UP
PART OF 302-9208, 419-0528 LINKAGE AR-FRONT
AN ATTACHMENT
i01342049 SEBP4874
1276625 LINES GP-GREASE Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5I-7238 [2] TUBE AS  
2. 5I-7239 [1] TUBE AS  
3. 132-1531 [1] TUBE AS  
4. 087-5966 I [2] HOSE AS  
    (EACH INCLUDES)
  105-6431 [1] CONNECTOR  
5. 8T-4191 M [10] BOLT (M10X1.5X16-MM)  
6. 8T-4121 [10] WASHER-HARD (11X21X2.5-MM THK)  
7. 8M-2772 [10] CLIP (LOOP)  
8. 3B-8489 [3] FITTING-GREASE (1/8-27 PTF)  
9. 6L-3616 [3] CONNECTOR  
10. 5K-9242 [2] UNION-FLARED  
11. 5H-8936 [1] ADAPTER  
12. 5K-9243 [1] ELBOW-FLARED  
13. 6V-3342 [1] ELBOW-PIPE  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP48741466
 

172-2939: LINES GP-GREASE

172-2939 LINES GP-GREASE -BOOM
S/N KGF1-UP; FAL1-UP
PART OF 240-3833, 415-1396 BOOM AR, 240-3835 BOOM AR-1 PIECE SHORT
AN ATTACHMENT
i01296193 SEBP4874
1722939 LINES GP-GREASE Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8M-2772 [2] CLIP (LOOP)  
2. 8T-4133 M [5] NUT (M10X1.5-THD)  
3. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
4. 166-1579 [3] CLIP  
5. 033-8248 [3] CLIP (LOOP)  
6. 8T-4191 M [3] BOLT (M10X1.5X16-MM)  
7. 166-3152 [1] HOSE AS  
8. 115-2678 I [1] HOSE AS  
    (EACH HOSE AS INCLUDES)
  105-6431 [1] CONNECTOR  
9. 3B-8489 [5] FITTING-GREASE (1/8-27 PTF)  
10. 6L-3616 [2] CONNECTOR  
11. 5K-9243 [2] ELBOW-FLARED  
12. 4I-4544 [1] TUBE AS  
13. 4I-4543 [1] TUBE AS  
14. 115-2677 I [1] HOSE AS  
  105-6431 [1] CONNECTOR  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP48741467
 

241-7286: LINES GP-GREASE

241-7286 LINES GP-GREASE -BOOM
S/N KGF1-UP; FAL1-UP
PART OF 240-3828, 240-3830, 240-3832, 240-3836, 275-3695, 298-4308, 359-2433, 359-2434, 415-1399, 415-8447, 415-8448, 416-0961 BOOM AR-1 PIECE LONG
AN ATTACHMENT
i02420748 SEBP4874
2417286 LINES GP-GREASE Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8M-2772 [2] CLIP (LOOP)  
2. 8T-4133 M [5] NUT (M10X1.5-THD)  
3. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
4. 166-1579 [3] CLIP  
5. 033-8248 [3] CLIP (LOOP)  
6. 8T-4191 M [3] BOLT (M10X1.5X16-MM)  
8. 134-9137 [1] HOSE AS  
  105-6431 [1] CONNECTOR  
9. 3B-8489 [5] FITTING-GREASE (1/8-27 PTF)  
10. 6L-3616 [2] CONNECTOR  
11. 5K-9243 [2] ELBOW-FLARED  
12. 4I-4544 [1] TUBE AS  
13. 4I-4543 [1] TUBE AS  
14. 216-6682 [2] HOSE AS  
    (EACH INCLUDES)
  105-6431 [1] CONNECTOR  
  M   METRIC PART
 

#SEBP48741468
 

267-0138: LINES GP-GREASE

267-0138 LINES GP-GREASE -STICK
S/N KGF1-UP; FAL1-UP
PART OF 240-3845 STICK AR, 290-1788, 298-4127 STICK AR-HOE
AN ATTACHMENT
i02420344 SEBP4874
2670138 LINES GP-GREASE Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [3] FITTING-GREASE (1/8-27 PTF)  
2. 5K-9242 [3] UNION-FLARED  
3. 6I-5134 [1] TUBE AS  
4. 6I-5135 [1] TUBE AS  
5. 6I-5136 [1] TUBE AS  
6. 6V-3342 [1] ELBOW-PIPE  
7. 7Y-2670 I [1] HOSE AS  
  105-6431 [1] CONNECTOR  
8. 087-5838 [2] PLATE  
9. 267-0139 [1] TUBE AS  
10. 267-0140 [1] TUBE AS  
11. 267-0141 [1] TUBE AS  
12. 5K-2298 [1] CLIP  
13. 6L-3616 [6] CONNECTOR  
14. 8M-2772 [3] CLIP (LOOP)  
15. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
16. 8T-4133 M [8] NUT (M10X1.5-THD)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP48741469
 

5I-7235: LINES GP-GREASE

5I-7235 LINES GP-GREASE -BOOM
S/N KGF1-UP
PART OF 302-9208, 419-0528 LINKAGE AR-FRONT
AN ATTACHMENT
i01341848 SEBP4874
5I7235 LINES GP-GREASE Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [5] FITTING-GREASE (1/8-27 PTF)  
2. 4I-4543 [1] TUBE AS  
3. 4I-4544 [1] TUBE AS  
4. 4I-6608 I [1] HOSE AS  
5. 4I-6610 I [1] HOSE AS  
    (EACH HOSE AS INCLUDES)
  105-6431 [1] CONNECTOR  
6. 5K-9243 [2] ELBOW-FLARED  
7. 087-5840 [3] PLATE  
8. 342-1962 [1] HOSE AS  
  105-6431 [1] CONNECTOR  
9. 033-8248 [6] CLIP (LOOP)  
10. 6L-3616 [2] CONNECTOR  
11. 8M-2772 [2] CLIP (LOOP)  
12. 8T-4121 [14] WASHER-HARD (11X21X2.5-MM THK)  
13. 8T-4133 M [2] NUT (M10X1.5-THD)  
14. 8T-4191 M [12] BOLT (M10X1.5X16-MM)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

Information:

Operation and Maintenance Manual
Boom and Stick Linkage - Lubricate
320D Excavator
Boom, Stick and Bucket Operation
320D Excavator
Boom/Stick/Bucket Combinations
320D Excavator
Special Instruction
Procedure to Replace the Bracket Assembly of the Boom Nose on Reach Booms, Heavy-Duty Reach Booms, and Mass Booms for Certain D Series Excavators {0679, 6501}
Procedure to Replace the Bracket Assembly of the Boom Nose on Reach Booms, Heavy-Duty Reach Booms, and Mass Booms for Certain D Series Excavators {0679, 6501}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE BOOM ASSEMBLY ON CERTAIN 320D, 320D L, 320D LRR, 320D LN, 321D LCR, 323D L, 323D LN, 323D SA, 324D, 324D L, 324E LN, 328D, 328D LCR, AND 329D L EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE BOOM ASSEMBLY ON CERTAIN 320D, 320D L, 320D LRR, 320D LN, 321D LCR, 323D L, 323D LN, 323D SA, 324D, 324D L, 324E LN, 328D, 328D LCR, AND 329D L EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR CHECKING AND POSSIBLY REPLACING THE PIN ASSEMBLY ON CERTAIN 320D AND 323D EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR CHECKING AND POSSIBLY REPLACING THE PIN ASSEMBLY ON CERTAIN 320D AND 323D EXCAVATORS
Service Letter-Australia
PRODUCT SUPPORT PROGRAM FOR REPLACING THE BOOM ASSEMBLY ON CERTAIN 320D, 320D L, 320D LRR, 320D LN, 321D LCR, 323D L, 323D LN, 323D SA, 324D, 324D L, 324E LN, 328D, 328D LCR, AND 329D L EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE BOOM ASSEMBLY ON CERTAIN 320D, 320D L, 320D LRR, 320D LN, 321D LCR, 323D L, 323D LN, 323D SA, 324D, 324D L, 324E LN, 328D, 328D LCR, AND 329D L EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR CHECKING AND POSSIBLY REPLACING THE PIN ASSEMBLY ON CERTAIN 320D AND 323D EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR CHECKING AND POSSIBLY REPLACING THE PIN ASSEMBLY ON CERTAIN 320D AND 323D EXCAVATORS
Service Letter-CFEL
PRODUCT SUPPORT PROGRAM FOR REPLACING THE BOOM ASSEMBLY ON CERTAIN 320D, 320D L, 320D LRR, 320D LN, 321D LCR, 323D L, 323D LN, 323D SA, 324D, 324D L, 324E LN, 328D, 328D LCR, AND 329D L EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE BOOM ASSEMBLY ON CERTAIN 320D, 320D L, 320D LRR, 320D LN, 321D LCR, 323D L, 323D LN, 323D SA, 324D, 324D L, 324E LN, 328D, 328D LCR, AND 329D L EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR CHECKING AND POSSIBLY REPLACING THE PIN ASSEMBLY ON CERTAIN 320D AND 323D EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR CHECKING AND POSSIBLY REPLACING THE PIN ASSEMBLY ON CERTAIN 320D AND 323D EXCAVATORS
Service Letter-CSARL
PRODUCT SUPPORT PROGRAM FOR REPLACING THE BOOM ASSEMBLY ON CERTAIN 320D, 320D L, 320D LRR, 320D LN, 321D LCR, 323D L, 323D LN, 323D SA, 324D, 324D L, 324E LN, 328D, 328D LCR, AND 329D L EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE BOOM ASSEMBLY ON CERTAIN 320D, 320D L, 320D LRR, 320D LN, 321D LCR, 323D L, 323D LN, 323D SA, 324D, 324D L, 324E LN, 328D, 328D LCR, AND 329D L EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR CHECKING AND POSSIBLY REPLACING THE PIN ASSEMBLY ON CERTAIN 320D AND 323D EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR CHECKING AND POSSIBLY REPLACING THE PIN ASSEMBLY ON CERTAIN 320D AND 323D EXCAVATORS
Service Letter-Americas
PRODUCT SUPPORT PROGRAM FOR REPLACING THE BOOM ASSEMBLY ON CERTAIN 320D, 320D L, 320D LRR, 320D LN, 321D LCR, 323D L, 323D LN, 323D SA, 324D, 324D L, 324E LN, 328D, 328D LCR, AND 329D L EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE BOOM ASSEMBLY ON CERTAIN 320D, 320D L, 320D LRR, 320D LN, 321D LCR, 323D L, 323D LN, 323D SA, 324D, 324D L, 324E LN, 328D, 328D LCR, AND 329D L EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR CHECKING AND POSSIBLY REPLACING THE PIN ASSEMBLY ON CERTAIN 320D AND 323D EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR CHECKING AND POSSIBLY REPLACING THE PIN ASSEMBLY ON CERTAIN 320D AND 323D EXCAVATORS
Specifications
Boom - 5.200 m (17.0604 ft)
320D and 323D Excavators Machine System Specifications
Boom - 5.7 m (18.70 ft)
320D and 323D Excavators Machine System Specifications
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING THE BOOM ASSEMBLY ON CERTAIN 320D, 320D L, 320D LRR, 320D LN, 321D LCR, 323D L, 323D LN, 323D SA, 324D, 324D L, 324E LN, 328D, 328D LCR, AND 329D L EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE BOOM ASSEMBLY ON CERTAIN 320D, 320D L, 320D LRR, 320D LN, 321D LCR, 323D L, 323D LN, 323D SA, 324D, 324D L, 324E LN, 328D, 328D LCR, AND 329D L EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR CHECKING AND POSSIBLY REPLACING THE PIN ASSEMBLY ON CERTAIN 320D AND 323D EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR CHECKING AND POSSIBLY REPLACING THE PIN ASSEMBLY ON CERTAIN 320D AND 323D EXCAVATORS
Service Letter-Asia
PRODUCT SUPPORT PROGRAM FOR REPLACING THE BOOM ASSEMBLY ON CERTAIN 320D, 320D L, 320D LRR, 320D LN, 321D LCR, 323D L, 323D LN, 323D SA, 324D, 324D L, 324E LN, 328D, 328D LCR, AND 329D L EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE BOOM ASSEMBLY ON CERTAIN 320D, 320D L, 320D LRR, 320D LN, 321D LCR, 323D L, 323D LN, 323D SA, 324D, 324D L, 324E LN, 328D, 328D LCR, AND 329D L EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR CHECKING AND POSSIBLY REPLACING THE PIN ASSEMBLY ON CERTAIN 320D AND 323D EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR CHECKING AND POSSIBLY REPLACING THE PIN ASSEMBLY ON CERTAIN 320D AND 323D EXCAVATORS
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE BOOM ASSEMBLY ON CERTAIN 320D, 320D L, 320D LRR, 320D LN, 321D LCR, 323D L, 323D LN, 323D SA, 324D, 324D L, 324E LN, 328D, 328D LCR, AND 329D L EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE BOOM ASSEMBLY ON CERTAIN 320D, 320D L, 320D LRR, 320D LN, 321D LCR, 323D L, 323D LN, 323D SA, 324D, 324D L, 324E LN, 328D, 328D LCR, AND 329D L EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR CHECKING AND POSSIBLY REPLACING THE PIN ASSEMBLY ON CERTAIN 320D AND 323D EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR CHECKING AND POSSIBLY REPLACING THE PIN ASSEMBLY ON CERTAIN 320D AND 323D EXCAVATORS
Disassembly and Assembly
Boom - Remove
320D Excavator Machine Systems
Boom - Install
320D Excavator Machine Systems
Boom Bearings and Seals - Remove and Install
320D Excavator Machine Systems
Service Magazine
Service Limit of the Bushings At the Front Linkages Are Now Available on Certain Excavators {5456, 5457, 5458, 6060, 6301, 6302, 6460, 6501, 6502, 6516, 6521, 6535, 6536}
2012/05/18
An Improvement has been Made to Reduce the Amount of Radial Play of the Front Linkage Pin on Certain Excavators {6501, 6502, 6513}
2010/12/08
Improved Pin Assemblies and Bushings for the Boom, the Stick, and the Bucket Pin Joints Are Now Used on Certain Excavators and Mobile Hydraulic Power Units {5456, 5457, 5458, 6501, 6502, 6513}
2013/06/20
An Improved Pin for the Boom is Now Used on Certain Excavators and Mobile Hydraulic Power Units {6501}
2012/01/31
Design Changes Around the Flag Plate of the Boom Foot Pin Eliminates Noise on Certain Excavators {6501}
2012/09/28
311D to 390D Excavator Front Linkage Bushing Diameter {6001, 6501, 6502, 6513, 6700}
2013/03/04
A New Pin for the Boom Is Now Available for Certain Excavators and Mobile Hydraulic Power Units {6501}
2013/07/22
An Improved Pin for the Boom is Available for Certain 320D and 323D Excavators {6501}
2013/05/02

Caterpillar Parts SIS Catalog 320D :

BOOM GP
290-9198 BOOM GP
BOOM GP
290-9195 BOOM GP
BOOM GP
290-9192 BOOM GP
BOOM GP
282-4533 BOOM GP
BOOM GP
268-7043 BOOM GP
BOOM GP
241-7291 BOOM GP
BOOM GP
241-7287 BOOM GP
BOOM GP
241-7282 BOOM GP
BOOM GP
315-1049 BOOM GP
BOOM GP
418-5104 BOOM GP
BOOM GP
418-5104 BOOM GP
244-8503 CONVERSION GP-LINKAGE
LINES GP-GREASE
127-6625 LINES GP-GREASE
LINES GP-GREASE
172-2939 LINES GP-GREASE
LINES GP-GREASE
241-7286 LINES GP-GREASE
LINES GP-GREASE
267-0138 LINES GP-GREASE

Truck sale:

Caterpillar 320D2
 
Caterpillar 320D2
- Crawler Excavators
THE CHINA ENGINEERS, LTD
Caterpillar 320D2
 
Caterpillar 320D2
- Crawler Excavators
PESA
Caterpillar 320D2, Construction
On Request 
Caterpillar 320D2, Construction
- Crawler Excavators
MONARK EQUIPMENT
Philippines
Caterpillar 320D2, Construction
139,000 USD 
Caterpillar 320D2, Construction
- Crawler Excavators
EMPRESAS MATCO, S.A. DE C.V.
Mexico
CATERPILLAR 320D2 2014
 
CATERPILLAR 320D2 2014
- TRACK EXCAVATORS
PESA
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.