WORK TOOLS
BUCKET GPWORK TOOLS
BUCKET GP
#SEBP48741580
347-6750: BUCKET & ADJUSTER GP
347-6750 BUCKET & ADJUSTER GP -SEVERE SERVICE ROCK, B-FAMILY
S/N KGF1-UP; FAL1-UP
1050-MM (41.3-IN) WIDE X 1.0-CU M (1.31-CU YD) CAPACITY. K-90 ADAPTERS, QTY OF 5
FIELD REPLACEMENT FOR @@@@@269-2616@@@@@
AN ATTACHMENT
S/N KGF1-UP; FAL1-UP
1050-MM (41.3-IN) WIDE X 1.0-CU M (1.31-CU YD) CAPACITY. K-90 ADAPTERS, QTY OF 5
FIELD REPLACEMENT FOR @@@@@269-2616@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your 320D EXCAVATOR:
CATERPILLAR SIS#SEBP48741581
347-6849: BUCKET & ADJUSTER GP
347-6849 BUCKET & ADJUSTER GP -GENERAL PURPOSE, B-FAMILY
S/N KGF1-UP; FAL1-UP
1250-MM (50-IN) WIDE X 1.0-CU M (1.31-CU YD) CAPACITY. J-350 ADAPTERS, QTY OF 5
AN ATTACHMENT
S/N KGF1-UP; FAL1-UP
1250-MM (50-IN) WIDE X 1.0-CU M (1.31-CU YD) CAPACITY. J-350 ADAPTERS, QTY OF 5
AN ATTACHMENT
For full view, you need register
Parts for your 320D EXCAVATOR:
CATERPILLAR SIS#SEBP48741582
347-6852: BUCKET & ADJUSTER GP
347-6852 BUCKET & ADJUSTER GP -HEAVY-DUTY, B-FAMILY
S/N KGF1-UP; FAL1-UP
1200-MM (48-IN) WIDE X 1.19-CU M (1.56-CU YD) CAPACITY. K-90 ADAPTERS, QTY OF 4
AN ATTACHMENT
S/N KGF1-UP; FAL1-UP
1200-MM (48-IN) WIDE X 1.19-CU M (1.56-CU YD) CAPACITY. K-90 ADAPTERS, QTY OF 4
AN ATTACHMENT
For full view, you need register
Parts for your 320D EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 7Y-2219 Y | [1] | ADJUSTER GP-BUCKET (B-FAMILY) | ||
| 371-9085 Y | [1] | BUCKET AS-HEAVY DUTY (B-FAMILY) | ||
| 2C-9259 | [2] | PLATE-IDENTIFICATION (CAT) | ||
| (ON LH & RH SIDES OF BUCKET) | ||||
| 312-5694 | [1] | SETSCREW (1/4-20X0.25-IN) | ||
| (USE TO MOUNT BUCKET INFORMATION PLATE) | ||||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP48741583
347-6853: BUCKET & ADJUSTER GP
347-6853 BUCKET & ADJUSTER GP -HEAVY-DUTY SPADE, B-FAMILY
S/N KGF1-UP; FAL1-UP
1350-MM (54-IN) WIDE X 1.40-CU M (1.83-CU YD) CAPACITY. K-90 ADAPTERS, QTY OF 5
AN ATTACHMENT
S/N KGF1-UP; FAL1-UP
1350-MM (54-IN) WIDE X 1.40-CU M (1.83-CU YD) CAPACITY. K-90 ADAPTERS, QTY OF 5
AN ATTACHMENT
For full view, you need register
Parts for your 320D EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 7Y-2219 Y | [1] | ADJUSTER GP-BUCKET (B-FAMILY) | ||
| 371-9086 Y | [1] | BUCKET AS-HEAVY DUTY SPADE (B-FAMILY) | ||
| 2C-9259 | [2] | PLATE-IDENTIFICATION (CAT) | ||
| (ON LH & RH SIDES OF BUCKET) | ||||
| 312-5694 | [1] | SETSCREW (1/4-20X0.25-IN) | ||
| (USE TO MOUNT BUCKET INFORMATION PLATE) | ||||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP48741584
356-8418: BUCKET & ADJUSTER GP
356-8418 BUCKET & ADJUSTER GP -GENERAL PURPOSE, B-FAMILY
S/N KGF1-UP; FAL1-UP
1232-MM (49-IN ) WIDE X 0.9-CU M (1.2-CU YD) CAPACITY. J-350 ADAPTERS, QTY OF 5
PART OF 356-8417 BUCKET AR-GENERAL PURPOSE
AN ATTACHMENT
S/N KGF1-UP; FAL1-UP
1232-MM (49-IN ) WIDE X 0.9-CU M (1.2-CU YD) CAPACITY. J-350 ADAPTERS, QTY OF 5
PART OF 356-8417 BUCKET AR-GENERAL PURPOSE
AN ATTACHMENT
For full view, you need register
Parts for your 320D EXCAVATOR:
CATERPILLAR SIS#SEBP48741585
358-8615: BUCKET & ADJUSTER GP
358-8615 BUCKET & ADJUSTER GP -GENERAL PURPOSE
S/N KGF1-UP
900-MM (36-IN) WIDE X 0.5-CU M (0.7-CU YD) CAPACITY. J-250 ADAPTERS, QTY OF 5
AN ATTACHMENT
S/N KGF1-UP
900-MM (36-IN) WIDE X 0.5-CU M (0.7-CU YD) CAPACITY. J-250 ADAPTERS, QTY OF 5
AN ATTACHMENT
For full view, you need register
Parts for your 320D EXCAVATOR:
CATERPILLAR SIS#SEBP48741586
377-5419: BUCKET & ADJUSTER GP
377-5419 BUCKET & ADJUSTER GP -B-FAMILY
S/N KGF1-UP; FAL1-UP
1150-MM (46-IN) WIDE X 0.90-CU M (1.18-CU YD) CAPACITY. J-350 ADAPTERS, QTY OF 5
AN ATTACHMENT
S/N KGF1-UP; FAL1-UP
1150-MM (46-IN) WIDE X 0.90-CU M (1.18-CU YD) CAPACITY. J-350 ADAPTERS, QTY OF 5
AN ATTACHMENT
For full view, you need register
Parts for your 320D EXCAVATOR:
CATERPILLAR SIS#SEBP48741587
418-5243: BUCKET & ADJUSTER GP
418-5243 BUCKET & ADJUSTER GP -B-FAMILY, GENERAL PURPOSE
S/N KGF1-UP; FAL1-UP
1250-MM (50-IN) WIDE X 1.0-CU M (1.31-CU YD) CAPACITY. J-350 ADAPTERS, QTY OF 5
AN ATTACHMENT
S/N KGF1-UP; FAL1-UP
1250-MM (50-IN) WIDE X 1.0-CU M (1.31-CU YD) CAPACITY. J-350 ADAPTERS, QTY OF 5
AN ATTACHMENT
For full view, you need register
Parts for your 320D EXCAVATOR:
CATERPILLAR SIS#SEBP48741588
420-3353: BUCKET & ADJUSTER GP
420-3353 BUCKET & ADJUSTER GP -B-FAMILY, GENERAL PURPOSE
S/N KGF1-UP; FAL1-UP
1150-MM (46-IN) WIDE X 0.90-CU M (1.18-CU YD) CAPACITY. J-350 ADAPTERS, QTY OF 5
AN ATTACHMENT
S/N KGF1-UP; FAL1-UP
1150-MM (46-IN) WIDE X 0.90-CU M (1.18-CU YD) CAPACITY. J-350 ADAPTERS, QTY OF 5
AN ATTACHMENT
For full view, you need register
Parts for your 320D EXCAVATOR:
CATERPILLAR SIS#SEBP48741589
420-3356: BUCKET & ADJUSTER GP
420-3356 BUCKET & ADJUSTER GP -B-FAMILY, HEAVY-DUTY
S/N KGF1-UP; FAL1-UP
1050-MM (43-IN) WIDE X 1.00-CU M (1.31-CU YD) CAPACITY. J-350 ADAPTERS, QTY OF 5
AN ATTACHMENT
S/N KGF1-UP; FAL1-UP
1050-MM (43-IN) WIDE X 1.00-CU M (1.31-CU YD) CAPACITY. J-350 ADAPTERS, QTY OF 5
AN ATTACHMENT
For full view, you need register
Parts for your 320D EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 7Y-2219 Y | [1] | ADJUSTER GP-BUCKET (B-FAMILY) | ||
| 420-3366 Y | [1] | BUCKET AS-HEAVY DUTY (B-FAMILY) | ||
| 2C-9259 | [2] | PLATE-IDENTIFICATION (CAT) | ||
| (ON LH & RH SIDES OF BUCKET) | ||||
| 312-5694 | [1] | SETSCREW (1/4-20X0.25-IN) | ||
| (USE TO MOUNT BUCKET INFORMATION PLATE) | ||||
| Y | SEPARATE ILLUSTRATION | |||
Information:
WORK TOOLS
BUCKET GP
Operation and Maintenance Manual
Special Instruction
Converting Excavator Buckets from J-Series Base Edge Assemblies to the K-Series{6523, 6800, 6803, 6823}
Converting Excavator Buckets from J-Series Base Edge Assemblies to the K-Series{6523, 6800, 6803, 6823}
Converting Excavator Buckets from J-Series Base Edge Assemblies to the K-Series{6523, 6800, 6803, 6823}
Rework Procedure for the Repair or Replacement of the Excavator Bucket Hinge{6001, 6101, 6102, 6112, 6131, 6503, 6514, 6523, 6524, 6526, 6528, 6529, 6531, 6537, 6539}
Rework Procedure for the Repair or Replacement of the Excavator Bucket Hinge{6001, 6101, 6102, 6112, 6131, 6503, 6514, 6523, 6524, 6526, 6528, 6529, 6531, 6537, 6539}
Rework Procedure for the Repair or Replacement of the Excavator Bucket Hinge{6001, 6101, 6102, 6112, 6131, 6503, 6514, 6523, 6524, 6526, 6528, 6529, 6531, 6537, 6539}
Measuring Wear on Bucket Base Edges (Determining Useful Life) {6101}
Measuring Wear on Bucket Base Edges (Determining Useful Life) {6101}
Measuring Wear on Bucket Base Edges (Determining Useful Life) {6101}
Rework Procedures for the Excavator D and E-Series Buckets {0679, 6001}
Rework Procedures for the Excavator D and E-Series Buckets {0679, 6001}
Rework Procedures for the Excavator D and E-Series Buckets {0679, 6001}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Installation and Weld Procedure for Modular Shroud System on Base Edge of Certain 320 through 390 Excavator Buckets {6001}
Installation and Weld Procedure for Modular Shroud System on Base Edge of Certain 320 through 390 Excavator Buckets {6001}
Installation and Weld Procedure for Modular Shroud System on Base Edge of Certain 320 through 390 Excavator Buckets {6001}
Procedure for Installation and Removal of Cat<SUP>®</SUP> Advansys Tips {0751, 6001, 6800, 6805}
Procedure for Installation and Removal of Cat® Advansys Tips {0751, 6001, 6800, 6805}
Procedure for Installation and Removal of Cat® Advansys Tips {0751, 6001, 6800, 6805}
Instructions for Welding the Cat<SUP>®</SUP> Advansys™ Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Instructions for Welding the Cat® Advansys™ Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Instructions for Welding the Cat® Advansys™ Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Technical Information Bulletin
Retainer Installation Procedure For The K-Series Bucket Tips{6805, 6822}
Retainer Installation Procedure For The K-Series Bucket Tips{6805, 6822}
Retainer Installation Procedure For The K-Series Bucket Tips{6805, 6822}
Specifications
Tool Operating Manual
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Disassembly and Assembly
Service Magazine
A Procedure to Weld Bucket Adjuster Group Flange in Place for Use with Quick Couplers on Certain 311 to 349 Excavators {0679, 6001, 6503, 6513, 6531, 6700}
A Procedure to Weld Bucket Adjuster Group Flange in Place for Use with Quick Couplers on Certain 311 to 349 Excavators {0679, 6001, 6503, 6513, 6531, 6700}
A Procedure to Weld Bucket Adjuster Group Flange in Place for Use with Quick Couplers on Certain 311 to 349 Excavators {0679, 6001, 6503, 6513, 6531, 6700}
